#define RTE_PMD_MLX5_DEFS_H_
#include <rte_ethdev_driver.h>
+#include <rte_vxlan.h>
#include "mlx5_autoconf.h"
* Request TX completion every time descriptors reach this threshold since
* the previous request. Must be a power of two for performance reasons.
*/
-#define MLX5_TX_COMP_THRESH 32
+#define MLX5_TX_COMP_THRESH 32u
/*
* Request TX completion every time the total number of WQEBBs used for inlining
*/
#define MLX5_TX_COMP_THRESH_INLINE_DIV (1 << 3)
+/*
+ * Maximal amount of normal completion CQEs
+ * processed in one call of tx_burst() routine.
+ */
+#define MLX5_TX_COMP_MAX_CQE 2u
+
+
/* Size of per-queue MR cache array for linear search. */
#define MLX5_MR_CACHE_N 8
#define MLX5_PMD_SOFT_COUNTERS 1
#endif
+/* Switch port ID parameters for bonding configurations. */
+#define MLX5_PORT_ID_BONDING_PF_MASK 0xf
+#define MLX5_PORT_ID_BONDING_PF_SHIFT 0xf
+
/* Alarm timeout. */
#define MLX5_ALARM_TIMEOUT_US 100000
#define MLX5_MAX_XSTATS 32
/* Maximum Packet headers size (L2+L3+L4) for TSO. */
-#define MLX5_MAX_TSO_HEADER 192
-
-/* Default maximum number of Tx queues for vectorized Tx. */
-#if defined(RTE_ARCH_ARM64)
-#define MLX5_VPMD_MAX_TXQS 8
-#define MLX5_VPMD_MAX_TXQS_BLUEFIELD 16
-#else
-#define MLX5_VPMD_MAX_TXQS 4
-#define MLX5_VPMD_MAX_TXQS_BLUEFIELD MLX5_VPMD_MAX_TXQS
-#endif
+#define MLX5_MAX_TSO_HEADER (128u + 34u)
+
+/* Inline data size required by NICs. */
+#define MLX5_INLINE_HSIZE_NONE 0
+#define MLX5_INLINE_HSIZE_L2 (sizeof(struct rte_ether_hdr) + \
+ sizeof(struct rte_vlan_hdr))
+#define MLX5_INLINE_HSIZE_L3 (MLX5_INLINE_HSIZE_L2 + \
+ sizeof(struct rte_ipv6_hdr))
+#define MLX5_INLINE_HSIZE_L4 (MLX5_INLINE_HSIZE_L3 + \
+ sizeof(struct rte_tcp_hdr))
+#define MLX5_INLINE_HSIZE_INNER_L2 (MLX5_INLINE_HSIZE_L3 + \
+ sizeof(struct rte_udp_hdr) + \
+ sizeof(struct rte_vxlan_hdr) + \
+ sizeof(struct rte_ether_hdr) + \
+ sizeof(struct rte_vlan_hdr))
+#define MLX5_INLINE_HSIZE_INNER_L3 (MLX5_INLINE_HSIZE_INNER_L2 + \
+ sizeof(struct rte_ipv6_hdr))
+#define MLX5_INLINE_HSIZE_INNER_L4 (MLX5_INLINE_HSIZE_INNER_L3 + \
+ sizeof(struct rte_tcp_hdr))
/* Threshold of buffer replenishment for vectorized Rx. */
#define MLX5_VPMD_RXQ_RPLNSH_THRESH(n) \
/* Maximum size of burst for vectorized Rx. */
#define MLX5_VPMD_RX_MAX_BURST 64U
-/*
- * Maximum size of burst for vectorized Tx. This is related to the maximum size
- * of Enhanced MPW (eMPW) WQE as vectorized Tx is supported with eMPW.
- * Careful when changing, large value can cause WQE DS to overlap.
- */
-#define MLX5_VPMD_TX_MAX_BURST 32U
-
/* Number of packets vectorized Rx can simultaneously process in a loop. */
#define MLX5_VPMD_DESCS_PER_LOOP 4
/* Timeout in seconds to get a valid link status. */
#define MLX5_LINK_STATUS_TIMEOUT 10
+/* Number of times to retry retrieving the physical link information. */
+#define MLX5_GET_LINK_STATUS_RETRY_COUNT 3
+
/* Maximum number of UAR pages used by a port,
* These are the size and mask for an array of mutexes used to synchronize
* the access to port's UARs on platforms that do not support 64 bit writes.
#define MLX5_UAR_PAGE_NUM_MAX 64
#define MLX5_UAR_PAGE_NUM_MASK ((MLX5_UAR_PAGE_NUM_MAX) - 1)
+/* Fields of memory mapping type in offset parameter of mmap() */
+#define MLX5_UAR_MMAP_CMD_SHIFT 8
+#define MLX5_UAR_MMAP_CMD_MASK 0xff
+
+/* Environment variable to control the doorbell register mapping. */
+#define MLX5_SHUT_UP_BF "MLX5_SHUT_UP_BF"
+#if defined(RTE_ARCH_ARM64)
+#define MLX5_SHUT_UP_BF_DEFAULT "0"
+#else
+#define MLX5_SHUT_UP_BF_DEFAULT "1"
+#endif
+
+#ifndef HAVE_MLX5DV_MMAP_GET_NC_PAGES_CMD
+#define MLX5_MMAP_GET_NC_PAGES_CMD 3
+#endif
+
/* Log 2 of the default number of strides per WQE for Multi-Packet RQ. */
#define MLX5_MPRQ_STRIDE_NUM_N 6U
/* Cache size of mempool for Multi-Packet RQ. */
#define MLX5_MPRQ_MP_CACHE_SZ 32U
+#define MLX5_XMETA_MODE_LEGACY 0
+#define MLX5_XMETA_MODE_META16 1
+#define MLX5_XMETA_MODE_META32 2
+
+/* Size of the simple hash table for metadata register table. */
+#define MLX5_FLOW_MREG_HTABLE_SZ 4096
+#define MLX5_FLOW_MREG_HNAME "MARK_COPY_TABLE"
+
/* Definition of static_assert found in /usr/include/assert.h */
#ifndef HAVE_STATIC_ASSERT
#define static_assert _Static_assert