#ifndef RTE_PMD_MLX5_DEFS_H_
#define RTE_PMD_MLX5_DEFS_H_
-#include <rte_ethdev_driver.h>
+#include <ethdev_driver.h>
#include <rte_vxlan.h>
-#include "mlx5_autoconf.h"
-
-/* Reported driver name. */
-#define MLX5_DRIVER_NAME "net_mlx5"
+#include <mlx5_common_defs.h>
-/* Maximum number of simultaneous unicast MAC addresses. */
-#define MLX5_MAX_UC_MAC_ADDRESSES 128
-/* Maximum number of simultaneous Multicast MAC addresses. */
-#define MLX5_MAX_MC_MAC_ADDRESSES 128
-/* Maximum number of simultaneous MAC addresses. */
-#define MLX5_MAX_MAC_ADDRESSES \
- (MLX5_MAX_UC_MAC_ADDRESSES + MLX5_MAX_MC_MAC_ADDRESSES)
+#include "mlx5_autoconf.h"
/* Maximum number of simultaneous VLAN filters. */
#define MLX5_MAX_VLAN_IDS 128
*/
#define MLX5_TX_COMP_MAX_CQE 2u
-
-/* Size of per-queue MR cache array for linear search. */
-#define MLX5_MR_CACHE_N 8
-
-/* Size of MR cache table for binary search. */
-#define MLX5_MR_BTREE_CACHE_N 256
-
/*
* If defined, only use software counters. The PMD will never ask the hardware
* for these, and many of them won't be available.
#define MLX5_PMD_SOFT_COUNTERS 1
#endif
-/* Switch port ID parameters for bonding configurations. */
-#define MLX5_PORT_ID_BONDING_PF_MASK 0xf
-#define MLX5_PORT_ID_BONDING_PF_SHIFT 0xf
-
/* Alarm timeout. */
#define MLX5_ALARM_TIMEOUT_US 100000
#define MLX5_MAX_XSTATS 32
/* Maximum Packet headers size (L2+L3+L4) for TSO. */
-#define MLX5_MAX_TSO_HEADER (128u + 34u)
+#define MLX5_MAX_TSO_HEADER 192U
/* Inline data size required by NICs. */
#define MLX5_INLINE_HSIZE_NONE 0
#define MLX5_VPMD_DESCS_PER_LOOP 4
/* Mask of RSS on source only or destination only. */
-#define MLX5_RSS_SRC_DST_ONLY (ETH_RSS_L3_SRC_ONLY | ETH_RSS_L3_DST_ONLY | \
- ETH_RSS_L4_SRC_ONLY | ETH_RSS_L4_DST_ONLY)
+#define MLX5_RSS_SRC_DST_ONLY (RTE_ETH_RSS_L3_SRC_ONLY | RTE_ETH_RSS_L3_DST_ONLY | \
+ RTE_ETH_RSS_L4_SRC_ONLY | RTE_ETH_RSS_L4_DST_ONLY)
/* Supported RSS */
-#define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP | \
+#define MLX5_RSS_HF_MASK (~(RTE_ETH_RSS_IP | RTE_ETH_RSS_UDP | RTE_ETH_RSS_TCP | \
MLX5_RSS_SRC_DST_ONLY))
/* Timeout in seconds to get a valid link status. */
#define MLX5_UAR_PAGE_NUM_MAX 64
#define MLX5_UAR_PAGE_NUM_MASK ((MLX5_UAR_PAGE_NUM_MAX) - 1)
-/* Fields of memory mapping type in offset parameter of mmap() */
-#define MLX5_UAR_MMAP_CMD_SHIFT 8
-#define MLX5_UAR_MMAP_CMD_MASK 0xff
-
-/* Environment variable to control the doorbell register mapping. */
-#define MLX5_SHUT_UP_BF "MLX5_SHUT_UP_BF"
-#if defined(RTE_ARCH_ARM64)
-#define MLX5_SHUT_UP_BF_DEFAULT "0"
-#else
-#define MLX5_SHUT_UP_BF_DEFAULT "1"
-#endif
-
-#ifndef HAVE_MLX5DV_MMAP_GET_NC_PAGES_CMD
-#define MLX5_MMAP_GET_NC_PAGES_CMD 3
-#endif
-
/* Log 2 of the default number of strides per WQE for Multi-Packet RQ. */
-#define MLX5_MPRQ_STRIDE_NUM_N 6U
+#define MLX5_MPRQ_DEFAULT_LOG_STRIDE_NUM 6U
+
+/* Log 2 of the default size of a stride per WQE for Multi-Packet RQ. */
+#define MLX5_MPRQ_DEFAULT_LOG_STRIDE_SIZE 11U
/* Two-byte shift is disabled for Multi-Packet RQ. */
#define MLX5_MPRQ_TWO_BYTE_SHIFT 0
#define MLX5_XMETA_MODE_LEGACY 0
#define MLX5_XMETA_MODE_META16 1
#define MLX5_XMETA_MODE_META32 2
-
-/* MLX5_TX_DB_NC supported values. */
-#define MLX5_TXDB_CACHED 0
-#define MLX5_TXDB_NCACHED 1
-#define MLX5_TXDB_HEURISTIC 2
+/* Provide info on patrial hw miss. Implies MLX5_XMETA_MODE_META16 */
+#define MLX5_XMETA_MODE_MISS_INFO 3
+
+/* Tx accurate scheduling on timestamps parameters. */
+#define MLX5_TXPP_WAIT_INIT_TS 1000ul /* How long to wait timestamp. */
+#define MLX5_TXPP_CLKQ_SIZE 1
+#define MLX5_TXPP_REARM ((1UL << MLX5_WQ_INDEX_WIDTH) / 4)
+#define MLX5_TXPP_REARM_SQ_SIZE (((1UL << MLX5_CQ_INDEX_WIDTH) / \
+ MLX5_TXPP_REARM) * 2)
+#define MLX5_TXPP_REARM_CQ_SIZE (MLX5_TXPP_REARM_SQ_SIZE / 2)
+/* The minimal size test packet to put into one WQE, padded by HW. */
+#define MLX5_TXPP_TEST_PKT_SIZE (sizeof(struct rte_ether_hdr) + \
+ sizeof(struct rte_ipv4_hdr))
/* Size of the simple hash table for metadata register table. */
-#define MLX5_FLOW_MREG_HTABLE_SZ 4096
+#define MLX5_FLOW_MREG_HTABLE_SZ 64
#define MLX5_FLOW_MREG_HNAME "MARK_COPY_TABLE"
#define MLX5_DEFAULT_COPY_ID UINT32_MAX
-/* Definition of static_assert found in /usr/include/assert.h */
-#ifndef HAVE_STATIC_ASSERT
+/* Size of the simple hash table for header modify table. */
+#define MLX5_FLOW_HDR_MODIFY_HTABLE_SZ (1 << 15)
+
+/* Size of the simple hash table for encap decap table. */
+#define MLX5_FLOW_ENCAP_DECAP_HTABLE_SZ (1 << 12)
+
+/* Size of the hash table for tag table. */
+#define MLX5_TAGS_HLIST_ARRAY_SIZE (1 << 15)
+
+/* Size fo the hash table for SFT table. */
+#define MLX5_FLOW_SFT_HLIST_ARRAY_SIZE 4096
+
+/* Hairpin TX/RX queue configuration parameters. */
+#define MLX5_HAIRPIN_QUEUE_STRIDE 6
+#define MLX5_HAIRPIN_JUMBO_LOG_SIZE (14 + 2)
+
+/* Maximum number of indirect actions supported by rte_flow */
+#define MLX5_MAX_INDIRECT_ACTIONS 3
+
+/* Maximum number of external Rx queues supported by rte_flow */
+#define MLX5_MAX_EXT_RX_QUEUES (UINT16_MAX - MLX5_EXTERNAL_RX_QUEUE_ID_MIN + 1)
+
+/*
+ * Linux definition of static_assert is found in /usr/include/assert.h.
+ * Windows does not require a redefinition.
+ */
+#if !defined(HAVE_STATIC_ASSERT) && !defined(RTE_EXEC_ENV_WINDOWS)
#define static_assert _Static_assert
#endif