net/hns3: fix queue state when concurrent with reset

[dpdk.git] / drivers / net / mlx5 / mlx5_defs.h

diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h
index 042e1f3..8f2807d 100644 (file)
--- a/drivers/net/mlx5/mlx5_defs.h
+++ b/drivers/net/mlx5/mlx5_defs.h
@@ -6,22 +6,11 @@
 #ifndef RTE_PMD_MLX5_DEFS_H_
 #define RTE_PMD_MLX5_DEFS_H_
 
-#include <rte_ethdev_driver.h>
+#include <ethdev_driver.h>
 #include <rte_vxlan.h>
 
 #include "mlx5_autoconf.h"
 
-/* Reported driver name. */
-#define MLX5_DRIVER_NAME "net_mlx5"
-
-/* Maximum number of simultaneous unicast MAC addresses. */
-#define MLX5_MAX_UC_MAC_ADDRESSES 128
-/* Maximum number of simultaneous Multicast MAC addresses. */
-#define MLX5_MAX_MC_MAC_ADDRESSES 128
-/* Maximum number of simultaneous MAC addresses. */
-#define MLX5_MAX_MAC_ADDRESSES \
-       (MLX5_MAX_UC_MAC_ADDRESSES + MLX5_MAX_MC_MAC_ADDRESSES)
-
 /* Maximum number of simultaneous VLAN filters. */
 #define MLX5_MAX_VLAN_IDS 128
 
@@ -59,10 +48,6 @@
 #define MLX5_PMD_SOFT_COUNTERS 1
 #endif
 
-/* Switch port ID parameters for bonding configurations. */
-#define MLX5_PORT_ID_BONDING_PF_MASK 0xf
-#define MLX5_PORT_ID_BONDING_PF_SHIFT 0xf
-
 /* Alarm timeout. */
 #define MLX5_ALARM_TIMEOUT_US 100000
 
@@ -104,8 +89,13 @@
 /* Number of packets vectorized Rx can simultaneously process in a loop. */
 #define MLX5_VPMD_DESCS_PER_LOOP      4
 
+/* Mask of RSS on source only or destination only. */
+#define MLX5_RSS_SRC_DST_ONLY (ETH_RSS_L3_SRC_ONLY | ETH_RSS_L3_DST_ONLY | \
+                              ETH_RSS_L4_SRC_ONLY | ETH_RSS_L4_DST_ONLY)
+
 /* Supported RSS */
-#define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP))
+#define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP | \
+                           MLX5_RSS_SRC_DST_ONLY))
 
 /* Timeout in seconds to get a valid link status. */
 #define MLX5_LINK_STATUS_TIMEOUT 10
@@ -146,6 +136,9 @@
 /* Log 2 of the default number of strides per WQE for Multi-Packet RQ. */
 #define MLX5_MPRQ_STRIDE_NUM_N 6U
 
+/* Log 2 of the default size of a stride per WQE for Multi-Packet RQ. */
+#define MLX5_MPRQ_STRIDE_SIZE_N 11U
+
 /* Two-byte shift is disabled for Multi-Packet RQ. */
 #define MLX5_MPRQ_TWO_BYTE_SHIFT 0
 
@@ -165,19 +158,48 @@
 #define MLX5_XMETA_MODE_LEGACY 0
 #define MLX5_XMETA_MODE_META16 1
 #define MLX5_XMETA_MODE_META32 2
+/* Provide info on patrial hw miss. Implies MLX5_XMETA_MODE_META16 */
+#define MLX5_XMETA_MODE_MISS_INFO 3
 
 /* MLX5_TX_DB_NC supported values. */
 #define MLX5_TXDB_CACHED 0
 #define MLX5_TXDB_NCACHED 1
 #define MLX5_TXDB_HEURISTIC 2
 
+/* Tx accurate scheduling on timestamps parameters. */
+#define MLX5_TXPP_WAIT_INIT_TS 1000ul /* How long to wait timestamp. */
+#define MLX5_TXPP_CLKQ_SIZE 1
+#define MLX5_TXPP_REARM        ((1UL << MLX5_WQ_INDEX_WIDTH) / 4)
+#define MLX5_TXPP_REARM_SQ_SIZE (((1UL << MLX5_CQ_INDEX_WIDTH) / \
+                                 MLX5_TXPP_REARM) * 2)
+#define MLX5_TXPP_REARM_CQ_SIZE (MLX5_TXPP_REARM_SQ_SIZE / 2)
+/* The minimal size test packet to put into one WQE, padded by HW. */
+#define MLX5_TXPP_TEST_PKT_SIZE (sizeof(struct rte_ether_hdr) +        \
+                                sizeof(struct rte_ipv4_hdr))
+
 /* Size of the simple hash table for metadata register table. */
 #define MLX5_FLOW_MREG_HTABLE_SZ 4096
 #define MLX5_FLOW_MREG_HNAME "MARK_COPY_TABLE"
 #define MLX5_DEFAULT_COPY_ID UINT32_MAX
 
-/* Definition of static_assert found in /usr/include/assert.h */
-#ifndef HAVE_STATIC_ASSERT
+/* Size of the simple hash table for header modify table. */
+#define MLX5_FLOW_HDR_MODIFY_HTABLE_SZ (1 << 16)
+
+/* Size of the simple hash table for encap decap table. */
+#define MLX5_FLOW_ENCAP_DECAP_HTABLE_SZ (1 << 16)
+
+/* Hairpin TX/RX queue configuration parameters. */
+#define MLX5_HAIRPIN_QUEUE_STRIDE 6
+#define MLX5_HAIRPIN_JUMBO_LOG_SIZE (14 + 2)
+
+/* Maximum number of shared actions supported by rte_flow */
+#define MLX5_MAX_SHARED_ACTIONS 2
+
+/*
+ * Linux definition of static_assert is found in /usr/include/assert.h.
+ * Windows does not require a redefinition.
+ */
+#if !defined(HAVE_STATIC_ASSERT) && !defined(RTE_EXEC_ENV_WINDOWS)
 #define static_assert _Static_assert
 #endif