#include <sys/socket.h>
#include <netinet/in.h>
#include <linux/if.h>
+#include <linux/ethtool.h>
+#include <linux/sockios.h>
/* DPDK headers don't like -pedantic. */
#ifdef PEDANTIC
return 0;
}
+/**
+ * Set device MTU.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param mtu
+ * MTU value to set.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_set_mtu(struct priv *priv, uint16_t mtu)
+{
+ return priv_set_sysfs_ulong(priv, "mtu", mtu);
+}
+
/**
* Set device flags.
*
priv_unlock(priv);
}
+/**
+ * DPDK callback to retrieve physical link information (unlocked version).
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param wait_to_complete
+ * Wait for request completion (ignored).
+ */
+static int
+mlx5_link_update_unlocked(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct ethtool_cmd edata = {
+ .cmd = ETHTOOL_GSET
+ };
+ struct ifreq ifr;
+ struct rte_eth_link dev_link;
+ int link_speed = 0;
+
+ (void)wait_to_complete;
+ if (priv_ifreq(priv, SIOCGIFFLAGS, &ifr)) {
+ WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(errno));
+ return -1;
+ }
+ memset(&dev_link, 0, sizeof(dev_link));
+ dev_link.link_status = ((ifr.ifr_flags & IFF_UP) &&
+ (ifr.ifr_flags & IFF_RUNNING));
+ ifr.ifr_data = &edata;
+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+ WARN("ioctl(SIOCETHTOOL, ETHTOOL_GSET) failed: %s",
+ strerror(errno));
+ return -1;
+ }
+ link_speed = ethtool_cmd_speed(&edata);
+ if (link_speed == -1)
+ dev_link.link_speed = 0;
+ else
+ dev_link.link_speed = link_speed;
+ dev_link.link_duplex = ((edata.duplex == DUPLEX_HALF) ?
+ ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
+ if (memcmp(&dev_link, &dev->data->dev_link, sizeof(dev_link))) {
+ /* Link status changed. */
+ dev->data->dev_link = dev_link;
+ return 0;
+ }
+ /* Link status is still the same. */
+ return -1;
+}
+
+/**
+ * DPDK callback to retrieve physical link information.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param wait_to_complete
+ * Wait for request completion (ignored).
+ */
+int
+mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+
+ priv_lock(priv);
+ ret = mlx5_link_update_unlocked(dev, wait_to_complete);
+ priv_unlock(priv);
+ return ret;
+}
+
+/**
+ * DPDK callback to change the MTU.
+ *
+ * Setting the MTU affects hardware MRU (packets larger than the MTU cannot be
+ * received). Use this as a hint to enable/disable scattered packets support
+ * and improve performance when not needed.
+ * Since failure is not an option, reconfiguring queues on the fly is not
+ * recommended.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param in_mtu
+ * New MTU.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+int
+mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret = 0;
+ unsigned int i;
+ uint16_t (*rx_func)(void *, struct rte_mbuf **, uint16_t) =
+ mlx5_rx_burst;
+
+ priv_lock(priv);
+ /* Set kernel interface MTU first. */
+ if (priv_set_mtu(priv, mtu)) {
+ ret = errno;
+ WARN("cannot set port %u MTU to %u: %s", priv->port, mtu,
+ strerror(ret));
+ goto out;
+ } else
+ DEBUG("adapter port %u MTU set to %u", priv->port, mtu);
+ priv->mtu = mtu;
+ /* Temporarily replace RX handler with a fake one, assuming it has not
+ * been copied elsewhere. */
+ dev->rx_pkt_burst = removed_rx_burst;
+ /* Make sure everyone has left mlx5_rx_burst() and uses
+ * removed_rx_burst() instead. */
+ rte_wmb();
+ usleep(1000);
+ /* Reconfigure each RX queue. */
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ struct rxq *rxq = (*priv->rxqs)[i];
+ unsigned int max_frame_len;
+ int sp;
+
+ if (rxq == NULL)
+ continue;
+ /* Calculate new maximum frame length according to MTU and
+ * toggle scattered support (sp) if necessary. */
+ max_frame_len = (priv->mtu + ETHER_HDR_LEN +
+ (ETHER_MAX_VLAN_FRAME_LEN - ETHER_MAX_LEN));
+ sp = (max_frame_len > (rxq->mb_len - RTE_PKTMBUF_HEADROOM));
+ /* Provide new values to rxq_setup(). */
+ dev->data->dev_conf.rxmode.jumbo_frame = sp;
+ dev->data->dev_conf.rxmode.max_rx_pkt_len = max_frame_len;
+ ret = rxq_rehash(dev, rxq);
+ if (ret) {
+ /* Force SP RX if that queue requires it and abort. */
+ if (rxq->sp)
+ rx_func = mlx5_rx_burst_sp;
+ break;
+ }
+ /* Reenable non-RSS queue attributes. No need to check
+ * for errors at this stage. */
+ if (!priv->rss) {
+ if (priv->started)
+ rxq_mac_addrs_add(rxq);
+ if (priv->started && priv->promisc_req)
+ rxq_promiscuous_enable(rxq);
+ if (priv->started && priv->allmulti_req)
+ rxq_allmulticast_enable(rxq);
+ }
+ /* Scattered burst function takes priority. */
+ if (rxq->sp)
+ rx_func = mlx5_rx_burst_sp;
+ }
+ /* Burst functions can now be called again. */
+ rte_wmb();
+ dev->rx_pkt_burst = rx_func;
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
/**
* Get PCI information from struct ibv_device.
*