/* SPDX-License-Identifier: BSD-3-Clause
* Copyright 2016 6WIND S.A.
- * Copyright 2016 Mellanox.
+ * Copyright 2016 Mellanox Technologies, Ltd
*/
+#include <netinet/in.h>
#include <sys/queue.h>
+#include <stdalign.h>
+#include <stdint.h>
#include <string.h>
/* Verbs header. */
#pragma GCC diagnostic error "-Wpedantic"
#endif
+#include <rte_common.h>
+#include <rte_ether.h>
+#include <rte_eth_ctrl.h>
#include <rte_ethdev_driver.h>
#include <rte_flow.h>
#include <rte_flow_driver.h>
#include "mlx5_defs.h"
#include "mlx5_prm.h"
#include "mlx5_glue.h"
-
-/* Define minimal priority for control plane flows. */
-#define MLX5_CTRL_FLOW_PRIORITY 4
-
-/* Internet Protocol versions. */
-#define MLX5_IPV4 4
-#define MLX5_IPV6 6
-
-#ifndef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
-struct ibv_flow_spec_counter_action {
- int dummy;
-};
-#endif
+#include "mlx5_flow.h"
/* Dev ops structure defined in mlx5.c */
extern const struct eth_dev_ops mlx5_dev_ops;
extern const struct eth_dev_ops mlx5_dev_ops_isolate;
-static int
-mlx5_flow_create_eth(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
-
-static int
-mlx5_flow_create_vlan(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
-
-static int
-mlx5_flow_create_ipv4(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
-
-static int
-mlx5_flow_create_ipv6(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
-
-static int
-mlx5_flow_create_udp(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
-
-static int
-mlx5_flow_create_tcp(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
-
-static int
-mlx5_flow_create_vxlan(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
-
-struct mlx5_flow_parse;
-
-static void
-mlx5_flow_create_copy(struct mlx5_flow_parse *parser, void *src,
- unsigned int size);
-
-static int
-mlx5_flow_create_flag_mark(struct mlx5_flow_parse *parser, uint32_t mark_id);
-
-static int
-mlx5_flow_create_count(struct priv *priv, struct mlx5_flow_parse *parser);
-
-/* Hash RX queue types. */
-enum hash_rxq_type {
- HASH_RXQ_TCPV4,
- HASH_RXQ_UDPV4,
- HASH_RXQ_IPV4,
- HASH_RXQ_TCPV6,
- HASH_RXQ_UDPV6,
- HASH_RXQ_IPV6,
- HASH_RXQ_ETH,
+enum mlx5_expansion {
+ MLX5_EXPANSION_ROOT,
+ MLX5_EXPANSION_ROOT_OUTER,
+ MLX5_EXPANSION_ROOT_ETH_VLAN,
+ MLX5_EXPANSION_ROOT_OUTER_ETH_VLAN,
+ MLX5_EXPANSION_OUTER_ETH,
+ MLX5_EXPANSION_OUTER_ETH_VLAN,
+ MLX5_EXPANSION_OUTER_VLAN,
+ MLX5_EXPANSION_OUTER_IPV4,
+ MLX5_EXPANSION_OUTER_IPV4_UDP,
+ MLX5_EXPANSION_OUTER_IPV4_TCP,
+ MLX5_EXPANSION_OUTER_IPV6,
+ MLX5_EXPANSION_OUTER_IPV6_UDP,
+ MLX5_EXPANSION_OUTER_IPV6_TCP,
+ MLX5_EXPANSION_VXLAN,
+ MLX5_EXPANSION_VXLAN_GPE,
+ MLX5_EXPANSION_GRE,
+ MLX5_EXPANSION_MPLS,
+ MLX5_EXPANSION_ETH,
+ MLX5_EXPANSION_ETH_VLAN,
+ MLX5_EXPANSION_VLAN,
+ MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV4_UDP,
+ MLX5_EXPANSION_IPV4_TCP,
+ MLX5_EXPANSION_IPV6,
+ MLX5_EXPANSION_IPV6_UDP,
+ MLX5_EXPANSION_IPV6_TCP,
};
-/* Initialization data for hash RX queue. */
-struct hash_rxq_init {
- uint64_t hash_fields; /* Fields that participate in the hash. */
- uint64_t dpdk_rss_hf; /* Matching DPDK RSS hash fields. */
- unsigned int flow_priority; /* Flow priority to use. */
- unsigned int ip_version; /* Internet protocol. */
-};
-
-/* Initialization data for hash RX queues. */
-const struct hash_rxq_init hash_rxq_init[] = {
- [HASH_RXQ_TCPV4] = {
- .hash_fields = (IBV_RX_HASH_SRC_IPV4 |
- IBV_RX_HASH_DST_IPV4 |
- IBV_RX_HASH_SRC_PORT_TCP |
- IBV_RX_HASH_DST_PORT_TCP),
- .dpdk_rss_hf = ETH_RSS_NONFRAG_IPV4_TCP,
- .flow_priority = 0,
- .ip_version = MLX5_IPV4,
+/** Supported expansion of items. */
+static const struct rte_flow_expand_node mlx5_support_expansion[] = {
+ [MLX5_EXPANSION_ROOT] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH,
+ MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV6),
+ .type = RTE_FLOW_ITEM_TYPE_END,
},
- [HASH_RXQ_UDPV4] = {
- .hash_fields = (IBV_RX_HASH_SRC_IPV4 |
- IBV_RX_HASH_DST_IPV4 |
- IBV_RX_HASH_SRC_PORT_UDP |
- IBV_RX_HASH_DST_PORT_UDP),
- .dpdk_rss_hf = ETH_RSS_NONFRAG_IPV4_UDP,
- .flow_priority = 0,
- .ip_version = MLX5_IPV4,
+ [MLX5_EXPANSION_ROOT_OUTER] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_ETH,
+ MLX5_EXPANSION_OUTER_IPV4,
+ MLX5_EXPANSION_OUTER_IPV6),
+ .type = RTE_FLOW_ITEM_TYPE_END,
},
- [HASH_RXQ_IPV4] = {
- .hash_fields = (IBV_RX_HASH_SRC_IPV4 |
- IBV_RX_HASH_DST_IPV4),
- .dpdk_rss_hf = (ETH_RSS_IPV4 |
- ETH_RSS_FRAG_IPV4),
- .flow_priority = 1,
- .ip_version = MLX5_IPV4,
+ [MLX5_EXPANSION_ROOT_ETH_VLAN] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH_VLAN),
+ .type = RTE_FLOW_ITEM_TYPE_END,
},
- [HASH_RXQ_TCPV6] = {
- .hash_fields = (IBV_RX_HASH_SRC_IPV6 |
- IBV_RX_HASH_DST_IPV6 |
- IBV_RX_HASH_SRC_PORT_TCP |
- IBV_RX_HASH_DST_PORT_TCP),
- .dpdk_rss_hf = ETH_RSS_NONFRAG_IPV6_TCP,
- .flow_priority = 0,
- .ip_version = MLX5_IPV6,
+ [MLX5_EXPANSION_ROOT_OUTER_ETH_VLAN] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_ETH_VLAN),
+ .type = RTE_FLOW_ITEM_TYPE_END,
},
- [HASH_RXQ_UDPV6] = {
- .hash_fields = (IBV_RX_HASH_SRC_IPV6 |
- IBV_RX_HASH_DST_IPV6 |
- IBV_RX_HASH_SRC_PORT_UDP |
- IBV_RX_HASH_DST_PORT_UDP),
- .dpdk_rss_hf = ETH_RSS_NONFRAG_IPV6_UDP,
- .flow_priority = 0,
- .ip_version = MLX5_IPV6,
+ [MLX5_EXPANSION_OUTER_ETH] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_IPV4,
+ MLX5_EXPANSION_OUTER_IPV6,
+ MLX5_EXPANSION_MPLS),
+ .type = RTE_FLOW_ITEM_TYPE_ETH,
+ .rss_types = 0,
},
- [HASH_RXQ_IPV6] = {
- .hash_fields = (IBV_RX_HASH_SRC_IPV6 |
- IBV_RX_HASH_DST_IPV6),
- .dpdk_rss_hf = (ETH_RSS_IPV6 |
- ETH_RSS_FRAG_IPV6),
- .flow_priority = 1,
- .ip_version = MLX5_IPV6,
+ [MLX5_EXPANSION_OUTER_ETH_VLAN] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_VLAN),
+ .type = RTE_FLOW_ITEM_TYPE_ETH,
+ .rss_types = 0,
},
- [HASH_RXQ_ETH] = {
- .hash_fields = 0,
- .dpdk_rss_hf = 0,
- .flow_priority = 2,
+ [MLX5_EXPANSION_OUTER_VLAN] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_IPV4,
+ MLX5_EXPANSION_OUTER_IPV6),
+ .type = RTE_FLOW_ITEM_TYPE_VLAN,
},
-};
-
-/* Number of entries in hash_rxq_init[]. */
-const unsigned int hash_rxq_init_n = RTE_DIM(hash_rxq_init);
-
-/** Structure for holding counter stats. */
-struct mlx5_flow_counter_stats {
- uint64_t hits; /**< Number of packets matched by the rule. */
- uint64_t bytes; /**< Number of bytes matched by the rule. */
-};
-
-/** Structure for Drop queue. */
-struct mlx5_hrxq_drop {
- struct ibv_rwq_ind_table *ind_table; /**< Indirection table. */
- struct ibv_qp *qp; /**< Verbs queue pair. */
- struct ibv_wq *wq; /**< Verbs work queue. */
- struct ibv_cq *cq; /**< Verbs completion queue. */
-};
-
-/* Flows structures. */
-struct mlx5_flow {
- uint64_t hash_fields; /**< Fields that participate in the hash. */
- struct ibv_flow_attr *ibv_attr; /**< Pointer to Verbs attributes. */
- struct ibv_flow *ibv_flow; /**< Verbs flow. */
- struct mlx5_hrxq *hrxq; /**< Hash Rx queues. */
-};
-
-/* Drop flows structures. */
-struct mlx5_flow_drop {
- struct ibv_flow_attr *ibv_attr; /**< Pointer to Verbs attributes. */
- struct ibv_flow *ibv_flow; /**< Verbs flow. */
-};
-
-struct rte_flow {
- TAILQ_ENTRY(rte_flow) next; /**< Pointer to the next flow structure. */
- uint32_t mark:1; /**< Set if the flow is marked. */
- uint32_t drop:1; /**< Drop queue. */
- uint16_t queues_n; /**< Number of entries in queue[]. */
- uint16_t (*queues)[]; /**< Queues indexes to use. */
- struct rte_eth_rss_conf rss_conf; /**< RSS configuration */
- uint8_t rss_key[40]; /**< copy of the RSS key. */
- struct ibv_counter_set *cs; /**< Holds the counters for the rule. */
- struct mlx5_flow_counter_stats counter_stats;/**<The counter stats. */
- struct mlx5_flow frxq[RTE_DIM(hash_rxq_init)];
- /**< Flow with Rx queue. */
-};
-
-/** Static initializer for items. */
-#define ITEMS(...) \
- (const enum rte_flow_item_type []){ \
- __VA_ARGS__, RTE_FLOW_ITEM_TYPE_END, \
- }
-
-/** Structure to generate a simple graph of layers supported by the NIC. */
-struct mlx5_flow_items {
- /** List of possible actions for these items. */
- const enum rte_flow_action_type *const actions;
- /** Bit-masks corresponding to the possibilities for the item. */
- const void *mask;
- /**
- * Default bit-masks to use when item->mask is not provided. When
- * \default_mask is also NULL, the full supported bit-mask (\mask) is
- * used instead.
- */
- const void *default_mask;
- /** Bit-masks size in bytes. */
- const unsigned int mask_sz;
- /**
- * Conversion function from rte_flow to NIC specific flow.
- *
- * @param item
- * rte_flow item to convert.
- * @param default_mask
- * Default bit-masks to use when item->mask is not provided.
- * @param data
- * Internal structure to store the conversion.
- *
- * @return
- * 0 on success, negative value otherwise.
- */
- int (*convert)(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
- /** Size in bytes of the destination structure. */
- const unsigned int dst_sz;
- /** List of possible following items. */
- const enum rte_flow_item_type *const items;
-};
-
-/** Valid action for this PMD. */
-static const enum rte_flow_action_type valid_actions[] = {
- RTE_FLOW_ACTION_TYPE_DROP,
- RTE_FLOW_ACTION_TYPE_QUEUE,
- RTE_FLOW_ACTION_TYPE_MARK,
- RTE_FLOW_ACTION_TYPE_FLAG,
-#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
- RTE_FLOW_ACTION_TYPE_COUNT,
-#endif
- RTE_FLOW_ACTION_TYPE_END,
-};
-
-/** Graph of supported items and associated actions. */
-static const struct mlx5_flow_items mlx5_flow_items[] = {
- [RTE_FLOW_ITEM_TYPE_END] = {
- .items = ITEMS(RTE_FLOW_ITEM_TYPE_ETH,
- RTE_FLOW_ITEM_TYPE_VXLAN),
+ [MLX5_EXPANSION_OUTER_IPV4] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT
+ (MLX5_EXPANSION_OUTER_IPV4_UDP,
+ MLX5_EXPANSION_OUTER_IPV4_TCP,
+ MLX5_EXPANSION_GRE),
+ .type = RTE_FLOW_ITEM_TYPE_IPV4,
+ .rss_types = ETH_RSS_IPV4 | ETH_RSS_FRAG_IPV4 |
+ ETH_RSS_NONFRAG_IPV4_OTHER,
},
- [RTE_FLOW_ITEM_TYPE_ETH] = {
- .items = ITEMS(RTE_FLOW_ITEM_TYPE_VLAN,
- RTE_FLOW_ITEM_TYPE_IPV4,
- RTE_FLOW_ITEM_TYPE_IPV6),
- .actions = valid_actions,
- .mask = &(const struct rte_flow_item_eth){
- .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
- .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
- .type = -1,
- },
- .default_mask = &rte_flow_item_eth_mask,
- .mask_sz = sizeof(struct rte_flow_item_eth),
- .convert = mlx5_flow_create_eth,
- .dst_sz = sizeof(struct ibv_flow_spec_eth),
+ [MLX5_EXPANSION_OUTER_IPV4_UDP] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN,
+ MLX5_EXPANSION_VXLAN_GPE),
+ .type = RTE_FLOW_ITEM_TYPE_UDP,
+ .rss_types = ETH_RSS_NONFRAG_IPV4_UDP,
},
- [RTE_FLOW_ITEM_TYPE_VLAN] = {
- .items = ITEMS(RTE_FLOW_ITEM_TYPE_IPV4,
- RTE_FLOW_ITEM_TYPE_IPV6),
- .actions = valid_actions,
- .mask = &(const struct rte_flow_item_vlan){
- .tci = -1,
- },
- .default_mask = &rte_flow_item_vlan_mask,
- .mask_sz = sizeof(struct rte_flow_item_vlan),
- .convert = mlx5_flow_create_vlan,
- .dst_sz = 0,
+ [MLX5_EXPANSION_OUTER_IPV4_TCP] = {
+ .type = RTE_FLOW_ITEM_TYPE_TCP,
+ .rss_types = ETH_RSS_NONFRAG_IPV4_TCP,
},
- [RTE_FLOW_ITEM_TYPE_IPV4] = {
- .items = ITEMS(RTE_FLOW_ITEM_TYPE_UDP,
- RTE_FLOW_ITEM_TYPE_TCP),
- .actions = valid_actions,
- .mask = &(const struct rte_flow_item_ipv4){
- .hdr = {
- .src_addr = -1,
- .dst_addr = -1,
- .type_of_service = -1,
- .next_proto_id = -1,
- },
- },
- .default_mask = &rte_flow_item_ipv4_mask,
- .mask_sz = sizeof(struct rte_flow_item_ipv4),
- .convert = mlx5_flow_create_ipv4,
- .dst_sz = sizeof(struct ibv_flow_spec_ipv4_ext),
+ [MLX5_EXPANSION_OUTER_IPV6] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT
+ (MLX5_EXPANSION_OUTER_IPV6_UDP,
+ MLX5_EXPANSION_OUTER_IPV6_TCP),
+ .type = RTE_FLOW_ITEM_TYPE_IPV6,
+ .rss_types = ETH_RSS_IPV6 | ETH_RSS_FRAG_IPV6 |
+ ETH_RSS_NONFRAG_IPV6_OTHER,
},
- [RTE_FLOW_ITEM_TYPE_IPV6] = {
- .items = ITEMS(RTE_FLOW_ITEM_TYPE_UDP,
- RTE_FLOW_ITEM_TYPE_TCP),
- .actions = valid_actions,
- .mask = &(const struct rte_flow_item_ipv6){
- .hdr = {
- .src_addr = {
- 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff,
- },
- .dst_addr = {
- 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff,
- },
- .vtc_flow = -1,
- .proto = -1,
- .hop_limits = -1,
- },
- },
- .default_mask = &rte_flow_item_ipv6_mask,
- .mask_sz = sizeof(struct rte_flow_item_ipv6),
- .convert = mlx5_flow_create_ipv6,
- .dst_sz = sizeof(struct ibv_flow_spec_ipv6),
+ [MLX5_EXPANSION_OUTER_IPV6_UDP] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN,
+ MLX5_EXPANSION_VXLAN_GPE),
+ .type = RTE_FLOW_ITEM_TYPE_UDP,
+ .rss_types = ETH_RSS_NONFRAG_IPV6_UDP,
},
- [RTE_FLOW_ITEM_TYPE_UDP] = {
- .items = ITEMS(RTE_FLOW_ITEM_TYPE_VXLAN),
- .actions = valid_actions,
- .mask = &(const struct rte_flow_item_udp){
- .hdr = {
- .src_port = -1,
- .dst_port = -1,
- },
- },
- .default_mask = &rte_flow_item_udp_mask,
- .mask_sz = sizeof(struct rte_flow_item_udp),
- .convert = mlx5_flow_create_udp,
- .dst_sz = sizeof(struct ibv_flow_spec_tcp_udp),
+ [MLX5_EXPANSION_OUTER_IPV6_TCP] = {
+ .type = RTE_FLOW_ITEM_TYPE_TCP,
+ .rss_types = ETH_RSS_NONFRAG_IPV6_TCP,
},
- [RTE_FLOW_ITEM_TYPE_TCP] = {
- .actions = valid_actions,
- .mask = &(const struct rte_flow_item_tcp){
- .hdr = {
- .src_port = -1,
- .dst_port = -1,
- },
- },
- .default_mask = &rte_flow_item_tcp_mask,
- .mask_sz = sizeof(struct rte_flow_item_tcp),
- .convert = mlx5_flow_create_tcp,
- .dst_sz = sizeof(struct ibv_flow_spec_tcp_udp),
+ [MLX5_EXPANSION_VXLAN] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH),
+ .type = RTE_FLOW_ITEM_TYPE_VXLAN,
},
- [RTE_FLOW_ITEM_TYPE_VXLAN] = {
- .items = ITEMS(RTE_FLOW_ITEM_TYPE_ETH),
- .actions = valid_actions,
- .mask = &(const struct rte_flow_item_vxlan){
- .vni = "\xff\xff\xff",
- },
- .default_mask = &rte_flow_item_vxlan_mask,
- .mask_sz = sizeof(struct rte_flow_item_vxlan),
- .convert = mlx5_flow_create_vxlan,
- .dst_sz = sizeof(struct ibv_flow_spec_tunnel),
+ [MLX5_EXPANSION_VXLAN_GPE] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH,
+ MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV6),
+ .type = RTE_FLOW_ITEM_TYPE_VXLAN_GPE,
+ },
+ [MLX5_EXPANSION_GRE] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4),
+ .type = RTE_FLOW_ITEM_TYPE_GRE,
+ },
+ [MLX5_EXPANSION_MPLS] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV6),
+ .type = RTE_FLOW_ITEM_TYPE_MPLS,
+ },
+ [MLX5_EXPANSION_ETH] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV6),
+ .type = RTE_FLOW_ITEM_TYPE_ETH,
+ },
+ [MLX5_EXPANSION_ETH_VLAN] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VLAN),
+ .type = RTE_FLOW_ITEM_TYPE_ETH,
+ },
+ [MLX5_EXPANSION_VLAN] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV6),
+ .type = RTE_FLOW_ITEM_TYPE_VLAN,
+ },
+ [MLX5_EXPANSION_IPV4] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4_UDP,
+ MLX5_EXPANSION_IPV4_TCP),
+ .type = RTE_FLOW_ITEM_TYPE_IPV4,
+ .rss_types = ETH_RSS_IPV4 | ETH_RSS_FRAG_IPV4 |
+ ETH_RSS_NONFRAG_IPV4_OTHER,
+ },
+ [MLX5_EXPANSION_IPV4_UDP] = {
+ .type = RTE_FLOW_ITEM_TYPE_UDP,
+ .rss_types = ETH_RSS_NONFRAG_IPV4_UDP,
+ },
+ [MLX5_EXPANSION_IPV4_TCP] = {
+ .type = RTE_FLOW_ITEM_TYPE_TCP,
+ .rss_types = ETH_RSS_NONFRAG_IPV4_TCP,
+ },
+ [MLX5_EXPANSION_IPV6] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV6_UDP,
+ MLX5_EXPANSION_IPV6_TCP),
+ .type = RTE_FLOW_ITEM_TYPE_IPV6,
+ .rss_types = ETH_RSS_IPV6 | ETH_RSS_FRAG_IPV6 |
+ ETH_RSS_NONFRAG_IPV6_OTHER,
+ },
+ [MLX5_EXPANSION_IPV6_UDP] = {
+ .type = RTE_FLOW_ITEM_TYPE_UDP,
+ .rss_types = ETH_RSS_NONFRAG_IPV6_UDP,
+ },
+ [MLX5_EXPANSION_IPV6_TCP] = {
+ .type = RTE_FLOW_ITEM_TYPE_TCP,
+ .rss_types = ETH_RSS_NONFRAG_IPV6_TCP,
},
-};
-
-/** Structure to pass to the conversion function. */
-struct mlx5_flow_parse {
- uint32_t inner; /**< Set once VXLAN is encountered. */
- uint32_t create:1;
- /**< Whether resources should remain after a validate. */
- uint32_t drop:1; /**< Target is a drop queue. */
- uint32_t mark:1; /**< Mark is present in the flow. */
- uint32_t count:1; /**< Count is present in the flow. */
- uint32_t mark_id; /**< Mark identifier. */
- uint16_t queues[RTE_MAX_QUEUES_PER_PORT]; /**< Queues indexes to use. */
- uint16_t queues_n; /**< Number of entries in queue[]. */
- struct rte_eth_rss_conf rss_conf; /**< RSS configuration */
- uint8_t rss_key[40]; /**< copy of the RSS key. */
- enum hash_rxq_type layer; /**< Last pattern layer detected. */
- struct ibv_counter_set *cs; /**< Holds the counter set for the rule */
- struct {
- struct ibv_flow_attr *ibv_attr;
- /**< Pointer to Verbs attributes. */
- unsigned int offset;
- /**< Current position or total size of the attribute. */
- } queue[RTE_DIM(hash_rxq_init)];
};
static const struct rte_flow_ops mlx5_flow_ops = {
.create = mlx5_flow_create,
.destroy = mlx5_flow_destroy,
.flush = mlx5_flow_flush,
-#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
- .query = mlx5_flow_query,
-#else
- .query = NULL,
-#endif
.isolate = mlx5_flow_isolate,
+ .query = mlx5_flow_query,
};
/* Convert FDIR request to Generic flow. */
struct rte_flow_item_ipv4 ipv4;
struct rte_flow_item_ipv6 ipv6;
} l3;
+ union {
+ struct rte_flow_item_ipv4 ipv4;
+ struct rte_flow_item_ipv6 ipv6;
+ } l3_mask;
union {
struct rte_flow_item_udp udp;
struct rte_flow_item_tcp tcp;
} l4;
+ union {
+ struct rte_flow_item_udp udp;
+ struct rte_flow_item_tcp tcp;
+ } l4_mask;
struct rte_flow_action_queue queue;
};
-/* Verbs specification header. */
-struct ibv_spec_header {
- enum ibv_flow_spec_type type;
- uint16_t size;
+/* Map of Verbs to Flow priority with 8 Verbs priorities. */
+static const uint32_t priority_map_3[][MLX5_PRIORITY_MAP_MAX] = {
+ { 0, 1, 2 }, { 2, 3, 4 }, { 5, 6, 7 },
};
+/* Map of Verbs to Flow priority with 16 Verbs priorities. */
+static const uint32_t priority_map_5[][MLX5_PRIORITY_MAP_MAX] = {
+ { 0, 1, 2 }, { 3, 4, 5 }, { 6, 7, 8 },
+ { 9, 10, 11 }, { 12, 13, 14 },
+};
+
+/* Tunnel information. */
+struct mlx5_flow_tunnel_info {
+ uint32_t tunnel; /**< Tunnel bit (see MLX5_FLOW_*). */
+ uint32_t ptype; /**< Tunnel Ptype (see RTE_PTYPE_*). */
+};
+
+static struct mlx5_flow_tunnel_info tunnels_info[] = {
+ {
+ .tunnel = MLX5_FLOW_LAYER_VXLAN,
+ .ptype = RTE_PTYPE_TUNNEL_VXLAN | RTE_PTYPE_L4_UDP,
+ },
+ {
+ .tunnel = MLX5_FLOW_LAYER_VXLAN_GPE,
+ .ptype = RTE_PTYPE_TUNNEL_VXLAN_GPE | RTE_PTYPE_L4_UDP,
+ },
+ {
+ .tunnel = MLX5_FLOW_LAYER_GRE,
+ .ptype = RTE_PTYPE_TUNNEL_GRE,
+ },
+ {
+ .tunnel = MLX5_FLOW_LAYER_MPLS | MLX5_FLOW_LAYER_OUTER_L4_UDP,
+ .ptype = RTE_PTYPE_TUNNEL_MPLS_IN_GRE | RTE_PTYPE_L4_UDP,
+ },
+ {
+ .tunnel = MLX5_FLOW_LAYER_MPLS,
+ .ptype = RTE_PTYPE_TUNNEL_MPLS_IN_GRE,
+ },
+};
+
+/* Holds the nic operations that should be used. */
+struct mlx5_flow_driver_ops nic_ops;
+
/**
- * Check support for a given item.
+ * Discover the maximum number of priority available.
*
- * @param item[in]
- * Item specification.
- * @param mask[in]
- * Bit-masks covering supported fields to compare with spec, last and mask in
- * \item.
- * @param size
- * Bit-Mask size in bytes.
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
*
* @return
- * 0 on success.
+ * number of supported flow priority on success, a negative errno
+ * value otherwise and rte_errno is set.
*/
-static int
-mlx5_flow_item_validate(const struct rte_flow_item *item,
- const uint8_t *mask, unsigned int size)
+int
+mlx5_flow_discover_priorities(struct rte_eth_dev *dev)
{
- int ret = 0;
+ struct {
+ struct ibv_flow_attr attr;
+ struct ibv_flow_spec_eth eth;
+ struct ibv_flow_spec_action_drop drop;
+ } flow_attr = {
+ .attr = {
+ .num_of_specs = 2,
+ },
+ .eth = {
+ .type = IBV_FLOW_SPEC_ETH,
+ .size = sizeof(struct ibv_flow_spec_eth),
+ },
+ .drop = {
+ .size = sizeof(struct ibv_flow_spec_action_drop),
+ .type = IBV_FLOW_SPEC_ACTION_DROP,
+ },
+ };
+ struct ibv_flow *flow;
+ struct mlx5_hrxq *drop = mlx5_hrxq_drop_new(dev);
+ uint16_t vprio[] = { 8, 16 };
+ int i;
+ int priority = 0;
+
+ if (!drop) {
+ rte_errno = ENOTSUP;
+ return -rte_errno;
+ }
+ for (i = 0; i != RTE_DIM(vprio); i++) {
+ flow_attr.attr.priority = vprio[i] - 1;
+ flow = mlx5_glue->create_flow(drop->qp, &flow_attr.attr);
+ if (!flow)
+ break;
+ claim_zero(mlx5_glue->destroy_flow(flow));
+ priority = vprio[i];
+ }
+ switch (priority) {
+ case 8:
+ priority = RTE_DIM(priority_map_3);
+ break;
+ case 16:
+ priority = RTE_DIM(priority_map_5);
+ break;
+ default:
+ rte_errno = ENOTSUP;
+ DRV_LOG(ERR,
+ "port %u verbs maximum priority: %d expected 8/16",
+ dev->data->port_id, vprio[i]);
+ return -rte_errno;
+ }
+ mlx5_hrxq_drop_release(dev);
+ DRV_LOG(INFO, "port %u flow maximum priority: %d",
+ dev->data->port_id, priority);
+ return priority;
+}
- if (!item->spec && (item->mask || item->last))
- return -1;
- if (item->spec && !item->mask) {
- unsigned int i;
- const uint8_t *spec = item->spec;
+/**
+ * Adjust flow priority based on the highest layer and the request priority.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] priority
+ * The rule base priority.
+ * @param[in] subpriority
+ * The priority based on the items.
+ *
+ * @return
+ * The new priority.
+ */
+uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority,
+ uint32_t subpriority)
+{
+ uint32_t res = 0;
+ struct priv *priv = dev->data->dev_private;
- for (i = 0; i < size; ++i)
- if ((spec[i] | mask[i]) != mask[i])
- return -1;
+ switch (priv->config.flow_prio) {
+ case RTE_DIM(priority_map_3):
+ res = priority_map_3[priority][subpriority];
+ break;
+ case RTE_DIM(priority_map_5):
+ res = priority_map_5[priority][subpriority];
+ break;
}
- if (item->last && !item->mask) {
- unsigned int i;
- const uint8_t *spec = item->last;
+ return res;
+}
- for (i = 0; i < size; ++i)
- if ((spec[i] | mask[i]) != mask[i])
- return -1;
- }
- if (item->mask) {
- unsigned int i;
- const uint8_t *spec = item->spec;
+/**
+ * Verify the @p item specifications (spec, last, mask) are compatible with the
+ * NIC capabilities.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] mask
+ * @p item->mask or flow default bit-masks.
+ * @param[in] nic_mask
+ * Bit-masks covering supported fields by the NIC to compare with user mask.
+ * @param[in] size
+ * Bit-masks size in bytes.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_item_acceptable(const struct rte_flow_item *item,
+ const uint8_t *mask,
+ const uint8_t *nic_mask,
+ unsigned int size,
+ struct rte_flow_error *error)
+{
+ unsigned int i;
- for (i = 0; i < size; ++i)
- if ((spec[i] | mask[i]) != mask[i])
- return -1;
- }
+ assert(nic_mask);
+ for (i = 0; i < size; ++i)
+ if ((nic_mask[i] | mask[i]) != nic_mask[i])
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "mask enables non supported"
+ " bits");
+ if (!item->spec && (item->mask || item->last))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "mask/last without a spec is not"
+ " supported");
if (item->spec && item->last) {
uint8_t spec[size];
uint8_t last[size];
- const uint8_t *apply = mask;
unsigned int i;
+ int ret;
- if (item->mask)
- apply = item->mask;
for (i = 0; i < size; ++i) {
- spec[i] = ((const uint8_t *)item->spec)[i] & apply[i];
- last[i] = ((const uint8_t *)item->last)[i] & apply[i];
+ spec[i] = ((const uint8_t *)item->spec)[i] & mask[i];
+ last[i] = ((const uint8_t *)item->last)[i] & mask[i];
}
ret = memcmp(spec, last, size);
+ if (ret != 0)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "range is not supported");
}
- return ret;
+ return 0;
}
/**
- * Copy the RSS configuration from the user ones, of the rss_conf is null,
- * uses the driver one.
+ * Adjust the hash fields according to the @p flow information.
*
- * @param priv
- * Pointer to private structure.
- * @param parser
- * Internal parser structure.
- * @param rss_conf
- * User RSS configuration to save.
+ * @param[in] dev_flow.
+ * Pointer to the mlx5_flow.
+ * @param[in] tunnel
+ * 1 when the hash field is for a tunnel item.
+ * @param[in] layer_types
+ * ETH_RSS_* types.
+ * @param[in] hash_fields
+ * Item hash fields.
*
* @return
- * 0 on success, errno value on failure.
+ * The hash fileds that should be used.
*/
-static int
-priv_flow_convert_rss_conf(struct priv *priv __rte_unused,
- struct mlx5_flow_parse *parser,
- const struct rte_eth_rss_conf *rss_conf)
+uint64_t
+mlx5_flow_hashfields_adjust(struct mlx5_flow *dev_flow,
+ int tunnel __rte_unused, uint32_t layer_types,
+ uint64_t hash_fields)
{
- /*
- * This function is also called at the beginning of
- * priv_flow_convert_actions() to initialize the parser with the
- * device default RSS configuration.
- */
- if (rss_conf) {
- if (rss_conf->rss_hf & MLX5_RSS_HF_MASK)
- return EINVAL;
- if (rss_conf->rss_key_len != 40)
- return EINVAL;
- if (rss_conf->rss_key_len && rss_conf->rss_key) {
- parser->rss_conf.rss_key_len = rss_conf->rss_key_len;
- memcpy(parser->rss_key, rss_conf->rss_key,
- rss_conf->rss_key_len);
- parser->rss_conf.rss_key = parser->rss_key;
- }
- parser->rss_conf.rss_hf = rss_conf->rss_hf;
- }
- return 0;
+ struct rte_flow *flow = dev_flow->flow;
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ int rss_request_inner = flow->rss.level >= 2;
+
+ /* Check RSS hash level for tunnel. */
+ if (tunnel && rss_request_inner)
+ hash_fields |= IBV_RX_HASH_INNER;
+ else if (tunnel || rss_request_inner)
+ return 0;
+#endif
+ /* Check if requested layer matches RSS hash fields. */
+ if (!(flow->rss.types & layer_types))
+ return 0;
+ return hash_fields;
}
/**
- * Extract attribute to the parser.
- *
- * @param priv
- * Pointer to private structure.
- * @param[in] attr
- * Flow rule attributes.
- * @param[out] error
- * Perform verbose error reporting if not NULL.
- * @param[in, out] parser
- * Internal parser structure.
+ * Lookup and set the ptype in the data Rx part. A single Ptype can be used,
+ * if several tunnel rules are used on this queue, the tunnel ptype will be
+ * cleared.
*
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
+ * @param rxq_ctrl
+ * Rx queue to update.
*/
-static int
-priv_flow_convert_attributes(struct priv *priv __rte_unused,
- const struct rte_flow_attr *attr,
- struct rte_flow_error *error,
- struct mlx5_flow_parse *parser __rte_unused)
+static void
+mlx5_flow_rxq_tunnel_ptype_update(struct mlx5_rxq_ctrl *rxq_ctrl)
{
- if (attr->group) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
- NULL,
- "groups are not supported");
- return -rte_errno;
- }
- if (attr->priority && attr->priority != MLX5_CTRL_FLOW_PRIORITY) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
- NULL,
- "priorities are not supported");
- return -rte_errno;
- }
- if (attr->egress) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
- NULL,
- "egress is not supported");
- return -rte_errno;
- }
- if (!attr->ingress) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
- NULL,
- "only ingress is supported");
- return -rte_errno;
+ unsigned int i;
+ uint32_t tunnel_ptype = 0;
+
+ /* Look up for the ptype to use. */
+ for (i = 0; i != MLX5_FLOW_TUNNEL; ++i) {
+ if (!rxq_ctrl->flow_tunnels_n[i])
+ continue;
+ if (!tunnel_ptype) {
+ tunnel_ptype = tunnels_info[i].ptype;
+ } else {
+ tunnel_ptype = 0;
+ break;
+ }
}
- return 0;
+ rxq_ctrl->rxq.tunnel = tunnel_ptype;
}
/**
- * Extract actions request to the parser.
+ * Set the Rx queue flags (Mark/Flag and Tunnel Ptypes) according to the flow.
*
- * @param priv
- * Pointer to private structure.
- * @param[in] actions
- * Associated actions (list terminated by the END action).
- * @param[out] error
- * Perform verbose error reporting if not NULL.
- * @param[in, out] parser
- * Internal parser structure.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] flow
+ * Pointer to flow structure.
*/
-static int
-priv_flow_convert_actions(struct priv *priv,
- const struct rte_flow_action actions[],
- struct rte_flow_error *error,
- struct mlx5_flow_parse *parser)
+static void
+mlx5_flow_rxq_flags_set(struct rte_eth_dev *dev, struct rte_flow *flow)
{
- /*
- * Add default RSS configuration necessary for Verbs to create QP even
- * if no RSS is necessary.
- */
- priv_flow_convert_rss_conf(priv, parser,
- (const struct rte_eth_rss_conf *)
- &priv->rss_conf);
- for (; actions->type != RTE_FLOW_ACTION_TYPE_END; ++actions) {
- if (actions->type == RTE_FLOW_ACTION_TYPE_VOID) {
- continue;
- } else if (actions->type == RTE_FLOW_ACTION_TYPE_DROP) {
- parser->drop = 1;
- } else if (actions->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
- const struct rte_flow_action_queue *queue =
- (const struct rte_flow_action_queue *)
- actions->conf;
- uint16_t n;
- uint16_t found = 0;
-
- if (!queue || (queue->index > (priv->rxqs_n - 1)))
- goto exit_action_not_supported;
- for (n = 0; n < parser->queues_n; ++n) {
- if (parser->queues[n] == queue->index) {
- found = 1;
+ struct priv *priv = dev->data->dev_private;
+ const int mark = !!(flow->actions &
+ (MLX5_FLOW_ACTION_FLAG | MLX5_FLOW_ACTION_MARK));
+ const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+ unsigned int i;
+
+ for (i = 0; i != flow->rss.queue_num; ++i) {
+ int idx = (*flow->queue)[i];
+ struct mlx5_rxq_ctrl *rxq_ctrl =
+ container_of((*priv->rxqs)[idx],
+ struct mlx5_rxq_ctrl, rxq);
+
+ if (mark) {
+ rxq_ctrl->rxq.mark = 1;
+ rxq_ctrl->flow_mark_n++;
+ }
+ if (tunnel) {
+ unsigned int j;
+
+ /* Increase the counter matching the flow. */
+ for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
+ if ((tunnels_info[j].tunnel & flow->layers) ==
+ tunnels_info[j].tunnel) {
+ rxq_ctrl->flow_tunnels_n[j]++;
break;
}
}
- if (parser->queues_n > 1 && !found) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- actions,
- "queue action not in RSS queues");
- return -rte_errno;
- }
- if (!found) {
- parser->queues_n = 1;
- parser->queues[0] = queue->index;
- }
- } else if (actions->type == RTE_FLOW_ACTION_TYPE_RSS) {
- const struct rte_flow_action_rss *rss =
- (const struct rte_flow_action_rss *)
- actions->conf;
- uint16_t n;
-
- if (!rss || !rss->num) {
- rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION,
- actions,
- "no valid queues");
- return -rte_errno;
- }
- if (parser->queues_n == 1) {
- uint16_t found = 0;
-
- assert(parser->queues_n);
- for (n = 0; n < rss->num; ++n) {
- if (parser->queues[0] ==
- rss->queue[n]) {
- found = 1;
- break;
- }
- }
- if (!found) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- actions,
- "queue action not in RSS"
- " queues");
- return -rte_errno;
- }
- }
- for (n = 0; n < rss->num; ++n) {
- if (rss->queue[n] >= priv->rxqs_n) {
- rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION,
- actions,
- "queue id > number of"
- " queues");
- return -rte_errno;
- }
- }
- for (n = 0; n < rss->num; ++n)
- parser->queues[n] = rss->queue[n];
- parser->queues_n = rss->num;
- if (priv_flow_convert_rss_conf(priv, parser,
- rss->rss_conf)) {
- rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION,
- actions,
- "wrong RSS configuration");
- return -rte_errno;
- }
- } else if (actions->type == RTE_FLOW_ACTION_TYPE_MARK) {
- const struct rte_flow_action_mark *mark =
- (const struct rte_flow_action_mark *)
- actions->conf;
-
- if (!mark) {
- rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION,
- actions,
- "mark must be defined");
- return -rte_errno;
- } else if (mark->id >= MLX5_FLOW_MARK_MAX) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- actions,
- "mark must be between 0"
- " and 16777199");
- return -rte_errno;
- }
- parser->mark = 1;
- parser->mark_id = mark->id;
- } else if (actions->type == RTE_FLOW_ACTION_TYPE_FLAG) {
- parser->mark = 1;
- } else if (actions->type == RTE_FLOW_ACTION_TYPE_COUNT &&
- priv->config.flow_counter_en) {
- parser->count = 1;
- } else {
- goto exit_action_not_supported;
+ mlx5_flow_rxq_tunnel_ptype_update(rxq_ctrl);
}
}
- if (parser->drop && parser->mark)
- parser->mark = 0;
- if (!parser->queues_n && !parser->drop) {
- rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_HANDLE,
- NULL, "no valid action");
- return -rte_errno;
- }
- return 0;
-exit_action_not_supported:
- rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
- actions, "action not supported");
- return -rte_errno;
}
/**
- * Validate items.
+ * Clear the Rx queue flags (Mark/Flag and Tunnel Ptype) associated with the
+ * @p flow if no other flow uses it with the same kind of request.
*
- * @param priv
- * Pointer to private structure.
- * @param[in] items
- * Pattern specification (list terminated by the END pattern item).
- * @param[out] error
- * Perform verbose error reporting if not NULL.
- * @param[in, out] parser
- * Internal parser structure.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Pointer to the flow.
*/
-static int
-priv_flow_convert_items_validate(struct priv *priv __rte_unused,
- const struct rte_flow_item items[],
- struct rte_flow_error *error,
- struct mlx5_flow_parse *parser)
+static void
+mlx5_flow_rxq_flags_trim(struct rte_eth_dev *dev, struct rte_flow *flow)
{
- const struct mlx5_flow_items *cur_item = mlx5_flow_items;
+ struct priv *priv = dev->data->dev_private;
+ const int mark = !!(flow->actions &
+ (MLX5_FLOW_ACTION_FLAG | MLX5_FLOW_ACTION_MARK));
+ const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
unsigned int i;
- /* Initialise the offsets to start after verbs attribute. */
- for (i = 0; i != hash_rxq_init_n; ++i)
- parser->queue[i].offset = sizeof(struct ibv_flow_attr);
- for (; items->type != RTE_FLOW_ITEM_TYPE_END; ++items) {
- const struct mlx5_flow_items *token = NULL;
- unsigned int n;
- int err;
+ assert(dev->data->dev_started);
+ for (i = 0; i != flow->rss.queue_num; ++i) {
+ int idx = (*flow->queue)[i];
+ struct mlx5_rxq_ctrl *rxq_ctrl =
+ container_of((*priv->rxqs)[idx],
+ struct mlx5_rxq_ctrl, rxq);
- if (items->type == RTE_FLOW_ITEM_TYPE_VOID)
- continue;
- for (i = 0;
- cur_item->items &&
- cur_item->items[i] != RTE_FLOW_ITEM_TYPE_END;
- ++i) {
- if (cur_item->items[i] == items->type) {
- token = &mlx5_flow_items[items->type];
- break;
- }
+ if (mark) {
+ rxq_ctrl->flow_mark_n--;
+ rxq_ctrl->rxq.mark = !!rxq_ctrl->flow_mark_n;
}
- if (!token)
- goto exit_item_not_supported;
- cur_item = token;
- err = mlx5_flow_item_validate(items,
- (const uint8_t *)cur_item->mask,
- cur_item->mask_sz);
- if (err)
- goto exit_item_not_supported;
- if (items->type == RTE_FLOW_ITEM_TYPE_VXLAN) {
- if (parser->inner) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- items,
- "cannot recognize multiple"
- " VXLAN encapsulations");
- return -rte_errno;
+ if (tunnel) {
+ unsigned int j;
+
+ /* Decrease the counter matching the flow. */
+ for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
+ if ((tunnels_info[j].tunnel & flow->layers) ==
+ tunnels_info[j].tunnel) {
+ rxq_ctrl->flow_tunnels_n[j]--;
+ break;
+ }
}
- parser->inner = IBV_FLOW_SPEC_INNER;
- }
- if (parser->drop) {
- parser->queue[HASH_RXQ_ETH].offset += cur_item->dst_sz;
- } else {
- for (n = 0; n != hash_rxq_init_n; ++n)
- parser->queue[n].offset += cur_item->dst_sz;
+ mlx5_flow_rxq_tunnel_ptype_update(rxq_ctrl);
}
}
- if (parser->drop) {
- parser->queue[HASH_RXQ_ETH].offset +=
- sizeof(struct ibv_flow_spec_action_drop);
- }
- if (parser->mark) {
- for (i = 0; i != hash_rxq_init_n; ++i)
- parser->queue[i].offset +=
- sizeof(struct ibv_flow_spec_action_tag);
- }
- if (parser->count) {
- unsigned int size = sizeof(struct ibv_flow_spec_counter_action);
+}
+
+/**
+ * Clear the Mark/Flag and Tunnel ptype information in all Rx queues.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ */
+static void
+mlx5_flow_rxq_flags_clear(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+
+ for (i = 0; i != priv->rxqs_n; ++i) {
+ struct mlx5_rxq_ctrl *rxq_ctrl;
+ unsigned int j;
- for (i = 0; i != hash_rxq_init_n; ++i)
- parser->queue[i].offset += size;
+ if (!(*priv->rxqs)[i])
+ continue;
+ rxq_ctrl = container_of((*priv->rxqs)[i],
+ struct mlx5_rxq_ctrl, rxq);
+ rxq_ctrl->flow_mark_n = 0;
+ rxq_ctrl->rxq.mark = 0;
+ for (j = 0; j != MLX5_FLOW_TUNNEL; ++j)
+ rxq_ctrl->flow_tunnels_n[j] = 0;
+ rxq_ctrl->rxq.tunnel = 0;
}
+}
+
+/*
+ * Validate the flag action.
+ *
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_action_flag(uint64_t action_flags,
+ struct rte_flow_error *error)
+{
+
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and flag in same flow");
+ if (action_flags & MLX5_FLOW_ACTION_MARK)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't mark and flag in same flow");
+ if (action_flags & MLX5_FLOW_ACTION_FLAG)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 flag"
+ " actions in same flow");
return 0;
-exit_item_not_supported:
- rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM,
- items, "item not supported");
- return -rte_errno;
}
-/**
- * Allocate memory space to store verbs flow attributes.
+/*
+ * Validate the mark action.
*
- * @param priv
- * Pointer to private structure.
- * @param[in] priority
- * Flow priority.
- * @param[in] size
- * Amount of byte to allocate.
+ * @param[in] action
+ * Pointer to the queue action.
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
* @param[out] error
- * Perform verbose error reporting if not NULL.
+ * Pointer to error structure.
*
* @return
- * A verbs flow attribute on success, NULL otherwise.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static struct ibv_flow_attr *
-priv_flow_convert_allocate(struct priv *priv __rte_unused,
- unsigned int priority,
- unsigned int size,
- struct rte_flow_error *error)
+int
+mlx5_flow_validate_action_mark(const struct rte_flow_action *action,
+ uint64_t action_flags,
+ struct rte_flow_error *error)
{
- struct ibv_flow_attr *ibv_attr;
+ const struct rte_flow_action_mark *mark = action->conf;
+
+ if (!mark)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "configuration cannot be null");
+ if (mark->id >= MLX5_FLOW_MARK_MAX)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &mark->id,
+ "mark id must in 0 <= id < "
+ RTE_STR(MLX5_FLOW_MARK_MAX));
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and mark in same flow");
+ if (action_flags & MLX5_FLOW_ACTION_FLAG)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't flag and mark in same flow");
+ if (action_flags & MLX5_FLOW_ACTION_MARK)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 mark actions in same"
+ " flow");
+ return 0;
+}
- ibv_attr = rte_calloc(__func__, 1, size, 0);
- if (!ibv_attr) {
- rte_flow_error_set(error, ENOMEM,
- RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
- NULL,
- "cannot allocate verbs spec attributes.");
- return NULL;
- }
- ibv_attr->priority = priority;
- return ibv_attr;
+/*
+ * Validate the drop action.
+ *
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+int
+mlx5_flow_validate_action_drop(uint64_t action_flags,
+ struct rte_flow_error *error)
+{
+ if (action_flags & MLX5_FLOW_ACTION_FLAG)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and flag in same flow");
+ if (action_flags & MLX5_FLOW_ACTION_MARK)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and mark in same flow");
+ if (action_flags & MLX5_FLOW_FATE_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 fate actions in"
+ " same flow");
+ return 0;
}
-/**
- * Finalise verbs flow attributes.
+/*
+ * Validate the queue action.
+ *
+ * @param[in] action
+ * Pointer to the queue action.
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[out] error
+ * Pointer to error structure.
*
- * @param priv
- * Pointer to private structure.
- * @param[in, out] parser
- * Internal parser structure.
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
*/
-static void
-priv_flow_convert_finalise(struct priv *priv __rte_unused,
- struct mlx5_flow_parse *parser)
+int
+mlx5_flow_validate_action_queue(const struct rte_flow_action *action,
+ uint64_t action_flags,
+ struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
{
- const unsigned int ipv4 =
- hash_rxq_init[parser->layer].ip_version == MLX5_IPV4;
- const enum hash_rxq_type hmin = ipv4 ? HASH_RXQ_TCPV4 : HASH_RXQ_TCPV6;
- const enum hash_rxq_type hmax = ipv4 ? HASH_RXQ_IPV4 : HASH_RXQ_IPV6;
- const enum hash_rxq_type ohmin = ipv4 ? HASH_RXQ_TCPV6 : HASH_RXQ_TCPV4;
- const enum hash_rxq_type ohmax = ipv4 ? HASH_RXQ_IPV6 : HASH_RXQ_IPV4;
- const enum hash_rxq_type ip = ipv4 ? HASH_RXQ_IPV4 : HASH_RXQ_IPV6;
+ struct priv *priv = dev->data->dev_private;
+ const struct rte_flow_action_queue *queue = action->conf;
+
+ if (action_flags & MLX5_FLOW_FATE_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 fate actions in"
+ " same flow");
+ if (queue->index >= priv->rxqs_n)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &queue->index,
+ "queue index out of range");
+ if (!(*priv->rxqs)[queue->index])
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &queue->index,
+ "queue is not configured");
+ return 0;
+}
+
+/*
+ * Validate the rss action.
+ *
+ * @param[in] action
+ * Pointer to the queue action.
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+int
+mlx5_flow_validate_action_rss(const struct rte_flow_action *action,
+ uint64_t action_flags,
+ struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+ const struct rte_flow_action_rss *rss = action->conf;
unsigned int i;
- /* Remove any other flow not matching the pattern. */
- if (parser->queues_n == 1) {
- for (i = 0; i != hash_rxq_init_n; ++i) {
- if (i == HASH_RXQ_ETH)
- continue;
- rte_free(parser->queue[i].ibv_attr);
- parser->queue[i].ibv_attr = NULL;
- }
- return;
- }
- if (parser->layer == HASH_RXQ_ETH) {
- goto fill;
- } else {
- /*
- * This layer becomes useless as the pattern define under
- * layers.
- */
- rte_free(parser->queue[HASH_RXQ_ETH].ibv_attr);
- parser->queue[HASH_RXQ_ETH].ibv_attr = NULL;
- }
- /* Remove opposite kind of layer e.g. IPv6 if the pattern is IPv4. */
- for (i = ohmin; i != (ohmax + 1); ++i) {
- if (!parser->queue[i].ibv_attr)
- continue;
- rte_free(parser->queue[i].ibv_attr);
- parser->queue[i].ibv_attr = NULL;
- }
- /* Remove impossible flow according to the RSS configuration. */
- if (hash_rxq_init[parser->layer].dpdk_rss_hf &
- parser->rss_conf.rss_hf) {
- /* Remove any other flow. */
- for (i = hmin; i != (hmax + 1); ++i) {
- if ((i == parser->layer) ||
- (!parser->queue[i].ibv_attr))
- continue;
- rte_free(parser->queue[i].ibv_attr);
- parser->queue[i].ibv_attr = NULL;
- }
- } else if (!parser->queue[ip].ibv_attr) {
- /* no RSS possible with the current configuration. */
- parser->queues_n = 1;
- return;
- }
-fill:
- /*
- * Fill missing layers in verbs specifications, or compute the correct
- * offset to allocate the memory space for the attributes and
- * specifications.
- */
- for (i = 0; i != hash_rxq_init_n - 1; ++i) {
- union {
- struct ibv_flow_spec_ipv4_ext ipv4;
- struct ibv_flow_spec_ipv6 ipv6;
- struct ibv_flow_spec_tcp_udp udp_tcp;
- } specs;
- void *dst;
- uint16_t size;
-
- if (i == parser->layer)
- continue;
- if (parser->layer == HASH_RXQ_ETH) {
- if (hash_rxq_init[i].ip_version == MLX5_IPV4) {
- size = sizeof(struct ibv_flow_spec_ipv4_ext);
- specs.ipv4 = (struct ibv_flow_spec_ipv4_ext){
- .type = IBV_FLOW_SPEC_IPV4_EXT,
- .size = size,
- };
- } else {
- size = sizeof(struct ibv_flow_spec_ipv6);
- specs.ipv6 = (struct ibv_flow_spec_ipv6){
- .type = IBV_FLOW_SPEC_IPV6,
- .size = size,
- };
- }
- if (parser->queue[i].ibv_attr) {
- dst = (void *)((uintptr_t)
- parser->queue[i].ibv_attr +
- parser->queue[i].offset);
- memcpy(dst, &specs, size);
- ++parser->queue[i].ibv_attr->num_of_specs;
- }
- parser->queue[i].offset += size;
- }
- if ((i == HASH_RXQ_UDPV4) || (i == HASH_RXQ_TCPV4) ||
- (i == HASH_RXQ_UDPV6) || (i == HASH_RXQ_TCPV6)) {
- size = sizeof(struct ibv_flow_spec_tcp_udp);
- specs.udp_tcp = (struct ibv_flow_spec_tcp_udp) {
- .type = ((i == HASH_RXQ_UDPV4 ||
- i == HASH_RXQ_UDPV6) ?
- IBV_FLOW_SPEC_UDP :
- IBV_FLOW_SPEC_TCP),
- .size = size,
- };
- if (parser->queue[i].ibv_attr) {
- dst = (void *)((uintptr_t)
- parser->queue[i].ibv_attr +
- parser->queue[i].offset);
- memcpy(dst, &specs, size);
- ++parser->queue[i].ibv_attr->num_of_specs;
- }
- parser->queue[i].offset += size;
- }
+ if (action_flags & MLX5_FLOW_FATE_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 fate actions"
+ " in same flow");
+ if (rss->func != RTE_ETH_HASH_FUNCTION_DEFAULT &&
+ rss->func != RTE_ETH_HASH_FUNCTION_TOEPLITZ)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->func,
+ "RSS hash function not supported");
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ if (rss->level > 2)
+#else
+ if (rss->level > 1)
+#endif
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->level,
+ "tunnel RSS is not supported");
+ if (rss->key_len < MLX5_RSS_HASH_KEY_LEN)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key too small");
+ if (rss->key_len > MLX5_RSS_HASH_KEY_LEN)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key too large");
+ if (rss->queue_num > priv->config.ind_table_max_size)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->queue_num,
+ "number of queues too large");
+ if (rss->types & MLX5_RSS_HF_MASK)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->types,
+ "some RSS protocols are not"
+ " supported");
+ for (i = 0; i != rss->queue_num; ++i) {
+ if (!(*priv->rxqs)[rss->queue[i]])
+ return rte_flow_error_set
+ (error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->queue[i], "queue is not configured");
}
+ return 0;
}
-/**
- * Validate and convert a flow supported by the NIC.
+/*
+ * Validate the count action.
*
- * @param priv
- * Pointer to private structure.
- * @param[in] attr
- * Flow rule attributes.
- * @param[in] pattern
- * Pattern specification (list terminated by the END pattern item).
- * @param[in] actions
- * Associated actions (list terminated by the END action).
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
* @param[out] error
- * Perform verbose error reporting if not NULL.
- * @param[in, out] parser
- * Internal parser structure.
+ * Pointer to error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
*/
-static int
-priv_flow_convert(struct priv *priv,
- const struct rte_flow_attr *attr,
- const struct rte_flow_item items[],
- const struct rte_flow_action actions[],
- struct rte_flow_error *error,
- struct mlx5_flow_parse *parser)
+int
+mlx5_flow_validate_action_count(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
{
- const struct mlx5_flow_items *cur_item = mlx5_flow_items;
- unsigned int i;
- int ret;
+ struct priv *priv = dev->data->dev_private;
- /* First step. Validate the attributes, items and actions. */
- *parser = (struct mlx5_flow_parse){
- .create = parser->create,
- .layer = HASH_RXQ_ETH,
- .mark_id = MLX5_FLOW_MARK_DEFAULT,
- };
- ret = priv_flow_convert_attributes(priv, attr, error, parser);
- if (ret)
- return ret;
- ret = priv_flow_convert_actions(priv, actions, error, parser);
- if (ret)
- return ret;
- ret = priv_flow_convert_items_validate(priv, items, error, parser);
- if (ret)
- return ret;
- priv_flow_convert_finalise(priv, parser);
- /*
- * Second step.
- * Allocate the memory space to store verbs specifications.
- */
- if (parser->drop) {
- unsigned int priority =
- attr->priority +
- hash_rxq_init[HASH_RXQ_ETH].flow_priority;
- unsigned int offset = parser->queue[HASH_RXQ_ETH].offset;
-
- parser->queue[HASH_RXQ_ETH].ibv_attr =
- priv_flow_convert_allocate(priv, priority,
- offset, error);
- if (!parser->queue[HASH_RXQ_ETH].ibv_attr)
- return ENOMEM;
- parser->queue[HASH_RXQ_ETH].offset =
- sizeof(struct ibv_flow_attr);
- } else {
- for (i = 0; i != hash_rxq_init_n; ++i) {
- unsigned int priority =
- attr->priority +
- hash_rxq_init[i].flow_priority;
- unsigned int offset;
-
- if (!(parser->rss_conf.rss_hf &
- hash_rxq_init[i].dpdk_rss_hf) &&
- (i != HASH_RXQ_ETH))
- continue;
- offset = parser->queue[i].offset;
- parser->queue[i].ibv_attr =
- priv_flow_convert_allocate(priv, priority,
- offset, error);
- if (!parser->queue[i].ibv_attr)
- goto exit_enomem;
- parser->queue[i].offset = sizeof(struct ibv_flow_attr);
- }
- }
- /* Third step. Conversion parse, fill the specifications. */
- parser->inner = 0;
- for (; items->type != RTE_FLOW_ITEM_TYPE_END; ++items) {
- if (items->type == RTE_FLOW_ITEM_TYPE_VOID)
- continue;
- cur_item = &mlx5_flow_items[items->type];
- ret = cur_item->convert(items,
- (cur_item->default_mask ?
- cur_item->default_mask :
- cur_item->mask),
- parser);
- if (ret) {
- rte_flow_error_set(error, ret,
- RTE_FLOW_ERROR_TYPE_ITEM,
- items, "item not supported");
- goto exit_free;
- }
- }
- if (parser->mark)
- mlx5_flow_create_flag_mark(parser, parser->mark_id);
- if (parser->count && parser->create) {
- mlx5_flow_create_count(priv, parser);
- if (!parser->cs)
- goto exit_count_error;
- }
- /*
- * Last step. Complete missing specification to reach the RSS
- * configuration.
- */
- if (!parser->drop) {
- priv_flow_convert_finalise(priv, parser);
- } else {
- parser->queue[HASH_RXQ_ETH].ibv_attr->priority =
- attr->priority +
- hash_rxq_init[parser->layer].flow_priority;
- }
-exit_free:
- /* Only verification is expected, all resources should be released. */
- if (!parser->create) {
- for (i = 0; i != hash_rxq_init_n; ++i) {
- if (parser->queue[i].ibv_attr) {
- rte_free(parser->queue[i].ibv_attr);
- parser->queue[i].ibv_attr = NULL;
- }
- }
- }
- return ret;
-exit_enomem:
- for (i = 0; i != hash_rxq_init_n; ++i) {
- if (parser->queue[i].ibv_attr) {
- rte_free(parser->queue[i].ibv_attr);
- parser->queue[i].ibv_attr = NULL;
- }
- }
- rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
- NULL, "cannot allocate verbs spec attributes.");
- return ret;
-exit_count_error:
- rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
- NULL, "cannot create counter.");
- return rte_errno;
+ if (!priv->config.flow_counter_en)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "flow counters are not supported.");
+ return 0;
}
/**
- * Copy the specification created into the flow.
- *
- * @param parser
- * Internal parser structure.
- * @param src
- * Create specification.
- * @param size
- * Size in bytes of the specification to copy.
+ * Verify the @p attributes will be correctly understood by the NIC and store
+ * them in the @p flow if everything is correct.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] attributes
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static void
-mlx5_flow_create_copy(struct mlx5_flow_parse *parser, void *src,
- unsigned int size)
+int
+mlx5_flow_validate_attributes(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attributes,
+ struct rte_flow_error *error)
{
- unsigned int i;
- void *dst;
-
- for (i = 0; i != hash_rxq_init_n; ++i) {
- if (!parser->queue[i].ibv_attr)
- continue;
- /* Specification must be the same l3 type or none. */
- if (parser->layer == HASH_RXQ_ETH ||
- (hash_rxq_init[parser->layer].ip_version ==
- hash_rxq_init[i].ip_version) ||
- (hash_rxq_init[i].ip_version == 0)) {
- dst = (void *)((uintptr_t)parser->queue[i].ibv_attr +
- parser->queue[i].offset);
- memcpy(dst, src, size);
- ++parser->queue[i].ibv_attr->num_of_specs;
- parser->queue[i].offset += size;
- }
- }
+ struct priv *priv = dev->data->dev_private;
+ uint32_t priority_max = priv->config.flow_prio - 1;
+
+ if (attributes->group)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
+ NULL, "groups is not supported");
+ if (attributes->priority != MLX5_FLOW_PRIO_RSVD &&
+ attributes->priority >= priority_max)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
+ NULL, "priority out of range");
+ if (attributes->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "egress is not supported");
+ if (attributes->transfer)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
+ NULL, "transfer is not supported");
+ if (!attributes->ingress)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "ingress attribute is mandatory");
+ return 0;
}
/**
- * Convert Ethernet item to Verbs specification.
+ * Validate Ethernet item.
*
- * @param item[in]
+ * @param[in] item
* Item specification.
- * @param default_mask[in]
- * Default bit-masks to use when item->mask is not provided.
- * @param data[in, out]
- * User structure.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
-mlx5_flow_create_eth(const struct rte_flow_item *item,
- const void *default_mask,
- void *data)
+int
+mlx5_flow_validate_item_eth(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
{
- const struct rte_flow_item_eth *spec = item->spec;
const struct rte_flow_item_eth *mask = item->mask;
- struct mlx5_flow_parse *parser = (struct mlx5_flow_parse *)data;
- const unsigned int eth_size = sizeof(struct ibv_flow_spec_eth);
- struct ibv_flow_spec_eth eth = {
- .type = parser->inner | IBV_FLOW_SPEC_ETH,
- .size = eth_size,
+ const struct rte_flow_item_eth nic_mask = {
+ .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .type = RTE_BE16(0xffff),
};
-
- /* Don't update layer for the inner pattern. */
- if (!parser->inner)
- parser->layer = HASH_RXQ_ETH;
- if (spec) {
- unsigned int i;
-
- if (!mask)
- mask = default_mask;
- memcpy(ð.val.dst_mac, spec->dst.addr_bytes, ETHER_ADDR_LEN);
- memcpy(ð.val.src_mac, spec->src.addr_bytes, ETHER_ADDR_LEN);
- eth.val.ether_type = spec->type;
- memcpy(ð.mask.dst_mac, mask->dst.addr_bytes, ETHER_ADDR_LEN);
- memcpy(ð.mask.src_mac, mask->src.addr_bytes, ETHER_ADDR_LEN);
- eth.mask.ether_type = mask->type;
- /* Remove unwanted bits from values. */
- for (i = 0; i < ETHER_ADDR_LEN; ++i) {
- eth.val.dst_mac[i] &= eth.mask.dst_mac[i];
- eth.val.src_mac[i] &= eth.mask.src_mac[i];
- }
- eth.val.ether_type &= eth.mask.ether_type;
- }
- mlx5_flow_create_copy(parser, ð, eth_size);
- return 0;
+ int ret;
+ int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+
+ if (item_flags & MLX5_FLOW_LAYER_OUTER_L2)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "3 levels of l2 are not supported");
+ if ((item_flags & MLX5_FLOW_LAYER_INNER_L2) && !tunnel)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "2 L2 without tunnel are not supported");
+ if (!mask)
+ mask = &rte_flow_item_eth_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_eth),
+ error);
+ return ret;
}
/**
- * Convert VLAN item to Verbs specification.
+ * Validate VLAN item.
*
- * @param item[in]
+ * @param[in] item
* Item specification.
- * @param default_mask[in]
- * Default bit-masks to use when item->mask is not provided.
- * @param data[in, out]
- * User structure.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
-mlx5_flow_create_vlan(const struct rte_flow_item *item,
- const void *default_mask,
- void *data)
+int
+mlx5_flow_validate_item_vlan(const struct rte_flow_item *item,
+ int64_t item_flags,
+ struct rte_flow_error *error)
{
const struct rte_flow_item_vlan *spec = item->spec;
const struct rte_flow_item_vlan *mask = item->mask;
- struct mlx5_flow_parse *parser = (struct mlx5_flow_parse *)data;
- struct ibv_flow_spec_eth *eth;
- const unsigned int eth_size = sizeof(struct ibv_flow_spec_eth);
-
+ const struct rte_flow_item_vlan nic_mask = {
+ .tci = RTE_BE16(0x0fff),
+ .inner_type = RTE_BE16(0xffff),
+ };
+ uint16_t vlan_tag = 0;
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ int ret;
+ const uint32_t l34m = tunnel ? (MLX5_FLOW_LAYER_INNER_L3 |
+ MLX5_FLOW_LAYER_INNER_L4) :
+ (MLX5_FLOW_LAYER_OUTER_L3 |
+ MLX5_FLOW_LAYER_OUTER_L4);
+ const uint32_t vlanm = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
+ MLX5_FLOW_LAYER_OUTER_VLAN;
+
+ if (item_flags & vlanm)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VLAN layer already configured");
+ else if ((item_flags & l34m) != 0)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L2 layer cannot follow L3/L4 layer");
+ if (!mask)
+ mask = &rte_flow_item_vlan_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_vlan),
+ error);
+ if (ret)
+ return ret;
if (spec) {
- unsigned int i;
- if (!mask)
- mask = default_mask;
-
- for (i = 0; i != hash_rxq_init_n; ++i) {
- if (!parser->queue[i].ibv_attr)
- continue;
-
- eth = (void *)((uintptr_t)parser->queue[i].ibv_attr +
- parser->queue[i].offset - eth_size);
- eth->val.vlan_tag = spec->tci;
- eth->mask.vlan_tag = mask->tci;
- eth->val.vlan_tag &= eth->mask.vlan_tag;
- }
+ vlan_tag = spec->tci;
+ vlan_tag &= mask->tci;
}
+ /*
+ * From verbs perspective an empty VLAN is equivalent
+ * to a packet without VLAN layer.
+ */
+ if (!vlan_tag)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "VLAN cannot be empty");
return 0;
}
/**
- * Convert IPv4 item to Verbs specification.
+ * Validate IPV4 item.
*
- * @param item[in]
+ * @param[in] item
* Item specification.
- * @param default_mask[in]
- * Default bit-masks to use when item->mask is not provided.
- * @param data[in, out]
- * User structure.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
-mlx5_flow_create_ipv4(const struct rte_flow_item *item,
- const void *default_mask,
- void *data)
+int
+mlx5_flow_validate_item_ipv4(const struct rte_flow_item *item,
+ int64_t item_flags,
+ struct rte_flow_error *error)
{
- const struct rte_flow_item_ipv4 *spec = item->spec;
const struct rte_flow_item_ipv4 *mask = item->mask;
- struct mlx5_flow_parse *parser = (struct mlx5_flow_parse *)data;
- unsigned int ipv4_size = sizeof(struct ibv_flow_spec_ipv4_ext);
- struct ibv_flow_spec_ipv4_ext ipv4 = {
- .type = parser->inner | IBV_FLOW_SPEC_IPV4_EXT,
- .size = ipv4_size,
+ const struct rte_flow_item_ipv4 nic_mask = {
+ .hdr = {
+ .src_addr = RTE_BE32(0xffffffff),
+ .dst_addr = RTE_BE32(0xffffffff),
+ .type_of_service = 0xff,
+ .next_proto_id = 0xff,
+ },
};
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ int ret;
- /* Don't update layer for the inner pattern. */
- if (!parser->inner)
- parser->layer = HASH_RXQ_IPV4;
- if (spec) {
- if (!mask)
- mask = default_mask;
- ipv4.val = (struct ibv_flow_ipv4_ext_filter){
- .src_ip = spec->hdr.src_addr,
- .dst_ip = spec->hdr.dst_addr,
- .proto = spec->hdr.next_proto_id,
- .tos = spec->hdr.type_of_service,
- };
- ipv4.mask = (struct ibv_flow_ipv4_ext_filter){
- .src_ip = mask->hdr.src_addr,
- .dst_ip = mask->hdr.dst_addr,
- .proto = mask->hdr.next_proto_id,
- .tos = mask->hdr.type_of_service,
- };
- /* Remove unwanted bits from values. */
- ipv4.val.src_ip &= ipv4.mask.src_ip;
- ipv4.val.dst_ip &= ipv4.mask.dst_ip;
- ipv4.val.proto &= ipv4.mask.proto;
- ipv4.val.tos &= ipv4.mask.tos;
- }
- mlx5_flow_create_copy(parser, &ipv4, ipv4_size);
+ if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple L3 layers not supported");
+ else if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 cannot follow an L4 layer.");
+ if (!mask)
+ mask = &rte_flow_item_ipv4_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_ipv4),
+ error);
+ if (ret < 0)
+ return ret;
return 0;
}
/**
- * Convert IPv6 item to Verbs specification.
+ * Validate IPV6 item.
*
- * @param item[in]
+ * @param[in] item
* Item specification.
- * @param default_mask[in]
- * Default bit-masks to use when item->mask is not provided.
- * @param data[in, out]
- * User structure.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
-mlx5_flow_create_ipv6(const struct rte_flow_item *item,
- const void *default_mask,
- void *data)
+int
+mlx5_flow_validate_item_ipv6(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
{
- const struct rte_flow_item_ipv6 *spec = item->spec;
const struct rte_flow_item_ipv6 *mask = item->mask;
- struct mlx5_flow_parse *parser = (struct mlx5_flow_parse *)data;
- unsigned int ipv6_size = sizeof(struct ibv_flow_spec_ipv6);
- struct ibv_flow_spec_ipv6 ipv6 = {
- .type = parser->inner | IBV_FLOW_SPEC_IPV6,
- .size = ipv6_size,
+ const struct rte_flow_item_ipv6 nic_mask = {
+ .hdr = {
+ .src_addr =
+ "\xff\xff\xff\xff\xff\xff\xff\xff"
+ "\xff\xff\xff\xff\xff\xff\xff\xff",
+ .dst_addr =
+ "\xff\xff\xff\xff\xff\xff\xff\xff"
+ "\xff\xff\xff\xff\xff\xff\xff\xff",
+ .vtc_flow = RTE_BE32(0xffffffff),
+ .proto = 0xff,
+ .hop_limits = 0xff,
+ },
};
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ int ret;
- /* Don't update layer for the inner pattern. */
- if (!parser->inner)
- parser->layer = HASH_RXQ_IPV6;
- if (spec) {
- unsigned int i;
- uint32_t vtc_flow_val;
- uint32_t vtc_flow_mask;
-
- if (!mask)
- mask = default_mask;
- memcpy(&ipv6.val.src_ip, spec->hdr.src_addr,
- RTE_DIM(ipv6.val.src_ip));
- memcpy(&ipv6.val.dst_ip, spec->hdr.dst_addr,
- RTE_DIM(ipv6.val.dst_ip));
- memcpy(&ipv6.mask.src_ip, mask->hdr.src_addr,
- RTE_DIM(ipv6.mask.src_ip));
- memcpy(&ipv6.mask.dst_ip, mask->hdr.dst_addr,
- RTE_DIM(ipv6.mask.dst_ip));
- vtc_flow_val = rte_be_to_cpu_32(spec->hdr.vtc_flow);
- vtc_flow_mask = rte_be_to_cpu_32(mask->hdr.vtc_flow);
- ipv6.val.flow_label =
- rte_cpu_to_be_32((vtc_flow_val & IPV6_HDR_FL_MASK) >>
- IPV6_HDR_FL_SHIFT);
- ipv6.val.traffic_class = (vtc_flow_val & IPV6_HDR_TC_MASK) >>
- IPV6_HDR_TC_SHIFT;
- ipv6.val.next_hdr = spec->hdr.proto;
- ipv6.val.hop_limit = spec->hdr.hop_limits;
- ipv6.mask.flow_label =
- rte_cpu_to_be_32((vtc_flow_mask & IPV6_HDR_FL_MASK) >>
- IPV6_HDR_FL_SHIFT);
- ipv6.mask.traffic_class = (vtc_flow_mask & IPV6_HDR_TC_MASK) >>
- IPV6_HDR_TC_SHIFT;
- ipv6.mask.next_hdr = mask->hdr.proto;
- ipv6.mask.hop_limit = mask->hdr.hop_limits;
- /* Remove unwanted bits from values. */
- for (i = 0; i < RTE_DIM(ipv6.val.src_ip); ++i) {
- ipv6.val.src_ip[i] &= ipv6.mask.src_ip[i];
- ipv6.val.dst_ip[i] &= ipv6.mask.dst_ip[i];
- }
- ipv6.val.flow_label &= ipv6.mask.flow_label;
- ipv6.val.traffic_class &= ipv6.mask.traffic_class;
- ipv6.val.next_hdr &= ipv6.mask.next_hdr;
- ipv6.val.hop_limit &= ipv6.mask.hop_limit;
- }
- mlx5_flow_create_copy(parser, &ipv6, ipv6_size);
+ if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple L3 layers not supported");
+ else if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 cannot follow an L4 layer.");
+ /*
+ * IPv6 is not recognised by the NIC inside a GRE tunnel.
+ * Such support has to be disabled as the rule will be
+ * accepted. Issue reproduced with Mellanox OFED 4.3-3.0.2.1 and
+ * Mellanox OFED 4.4-1.0.0.0.
+ */
+ if (tunnel && item_flags & MLX5_FLOW_LAYER_GRE)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "IPv6 inside a GRE tunnel is"
+ " not recognised.");
+ if (!mask)
+ mask = &rte_flow_item_ipv6_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_ipv6),
+ error);
+ if (ret < 0)
+ return ret;
return 0;
}
/**
- * Convert UDP item to Verbs specification.
+ * Validate UDP item.
*
- * @param item[in]
+ * @param[in] item
* Item specification.
- * @param default_mask[in]
- * Default bit-masks to use when item->mask is not provided.
- * @param data[in, out]
- * User structure.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
-mlx5_flow_create_udp(const struct rte_flow_item *item,
- const void *default_mask,
- void *data)
+int
+mlx5_flow_validate_item_udp(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
{
- const struct rte_flow_item_udp *spec = item->spec;
const struct rte_flow_item_udp *mask = item->mask;
- struct mlx5_flow_parse *parser = (struct mlx5_flow_parse *)data;
- unsigned int udp_size = sizeof(struct ibv_flow_spec_tcp_udp);
- struct ibv_flow_spec_tcp_udp udp = {
- .type = parser->inner | IBV_FLOW_SPEC_UDP,
- .size = udp_size,
- };
-
- /* Don't update layer for the inner pattern. */
- if (!parser->inner) {
- if (parser->layer == HASH_RXQ_IPV4)
- parser->layer = HASH_RXQ_UDPV4;
- else
- parser->layer = HASH_RXQ_UDPV6;
- }
- if (spec) {
- if (!mask)
- mask = default_mask;
- udp.val.dst_port = spec->hdr.dst_port;
- udp.val.src_port = spec->hdr.src_port;
- udp.mask.dst_port = mask->hdr.dst_port;
- udp.mask.src_port = mask->hdr.src_port;
- /* Remove unwanted bits from values. */
- udp.val.src_port &= udp.mask.src_port;
- udp.val.dst_port &= udp.mask.dst_port;
- }
- mlx5_flow_create_copy(parser, &udp, udp_size);
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ int ret;
+
+ if (target_protocol != 0xff && target_protocol != IPPROTO_UDP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with UDP layer");
+ if (!(item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3)))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 is mandatory to filter on L4");
+ if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L4 layer is already present");
+ if (!mask)
+ mask = &rte_flow_item_udp_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_udp_mask,
+ sizeof(struct rte_flow_item_udp), error);
+ if (ret < 0)
+ return ret;
return 0;
}
/**
- * Convert TCP item to Verbs specification.
+ * Validate TCP item.
*
- * @param item[in]
+ * @param[in] item
* Item specification.
- * @param default_mask[in]
- * Default bit-masks to use when item->mask is not provided.
- * @param data[in, out]
- * User structure.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
-mlx5_flow_create_tcp(const struct rte_flow_item *item,
- const void *default_mask,
- void *data)
+int
+mlx5_flow_validate_item_tcp(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
{
- const struct rte_flow_item_tcp *spec = item->spec;
const struct rte_flow_item_tcp *mask = item->mask;
- struct mlx5_flow_parse *parser = (struct mlx5_flow_parse *)data;
- unsigned int tcp_size = sizeof(struct ibv_flow_spec_tcp_udp);
- struct ibv_flow_spec_tcp_udp tcp = {
- .type = parser->inner | IBV_FLOW_SPEC_TCP,
- .size = tcp_size,
- };
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ int ret;
- /* Don't update layer for the inner pattern. */
- if (!parser->inner) {
- if (parser->layer == HASH_RXQ_IPV4)
- parser->layer = HASH_RXQ_TCPV4;
- else
- parser->layer = HASH_RXQ_TCPV6;
- }
- if (spec) {
- if (!mask)
- mask = default_mask;
- tcp.val.dst_port = spec->hdr.dst_port;
- tcp.val.src_port = spec->hdr.src_port;
- tcp.mask.dst_port = mask->hdr.dst_port;
- tcp.mask.src_port = mask->hdr.src_port;
- /* Remove unwanted bits from values. */
- tcp.val.src_port &= tcp.mask.src_port;
- tcp.val.dst_port &= tcp.mask.dst_port;
- }
- mlx5_flow_create_copy(parser, &tcp, tcp_size);
+ if (target_protocol != 0xff && target_protocol != IPPROTO_TCP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with TCP layer");
+ if (!(item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3)))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 is mandatory to filter on L4");
+ if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L4 layer is already present");
+ if (!mask)
+ mask = &rte_flow_item_tcp_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_tcp_mask,
+ sizeof(struct rte_flow_item_tcp), error);
+ if (ret < 0)
+ return ret;
return 0;
}
/**
- * Convert VXLAN item to Verbs specification.
+ * Validate VXLAN item.
*
- * @param item[in]
+ * @param[in] item
* Item specification.
- * @param default_mask[in]
- * Default bit-masks to use when item->mask is not provided.
- * @param data[in, out]
- * User structure.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
-mlx5_flow_create_vxlan(const struct rte_flow_item *item,
- const void *default_mask,
- void *data)
+int
+mlx5_flow_validate_item_vxlan(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
{
const struct rte_flow_item_vxlan *spec = item->spec;
const struct rte_flow_item_vxlan *mask = item->mask;
- struct mlx5_flow_parse *parser = (struct mlx5_flow_parse *)data;
- unsigned int size = sizeof(struct ibv_flow_spec_tunnel);
- struct ibv_flow_spec_tunnel vxlan = {
- .type = parser->inner | IBV_FLOW_SPEC_VXLAN_TUNNEL,
- .size = size,
- };
+ int ret;
union vni {
uint32_t vlan_id;
uint8_t vni[4];
- } id;
+ } id = { .vlan_id = 0, };
+ uint32_t vlan_id = 0;
- id.vni[0] = 0;
- parser->inner = IBV_FLOW_SPEC_INNER;
+
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "a tunnel is already present");
+ /*
+ * Verify only UDPv4 is present as defined in
+ * https://tools.ietf.org/html/rfc7348
+ */
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "no outer UDP layer found");
+ if (!mask)
+ mask = &rte_flow_item_vxlan_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_vxlan_mask,
+ sizeof(struct rte_flow_item_vxlan),
+ error);
+ if (ret < 0)
+ return ret;
if (spec) {
- if (!mask)
- mask = default_mask;
memcpy(&id.vni[1], spec->vni, 3);
- vxlan.val.tunnel_id = id.vlan_id;
+ vlan_id = id.vlan_id;
memcpy(&id.vni[1], mask->vni, 3);
- vxlan.mask.tunnel_id = id.vlan_id;
- /* Remove unwanted bits from values. */
- vxlan.val.tunnel_id &= vxlan.mask.tunnel_id;
+ vlan_id &= id.vlan_id;
}
/*
- * Tunnel id 0 is equivalent as not adding a VXLAN layer, if only this
- * layer is defined in the Verbs specification it is interpreted as
- * wildcard and all packets will match this rule, if it follows a full
- * stack layer (ex: eth / ipv4 / udp), all packets matching the layers
- * before will also match this rule.
- * To avoid such situation, VNI 0 is currently refused.
+ * Tunnel id 0 is equivalent as not adding a VXLAN layer, if
+ * only this layer is defined in the Verbs specification it is
+ * interpreted as wildcard and all packets will match this
+ * rule, if it follows a full stack layer (ex: eth / ipv4 /
+ * udp), all packets matching the layers before will also
+ * match this rule. To avoid such situation, VNI 0 is
+ * currently refused.
*/
- if (!vxlan.val.tunnel_id)
- return EINVAL;
- mlx5_flow_create_copy(parser, &vxlan, size);
+ if (!vlan_id)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VXLAN vni cannot be 0");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VXLAN tunnel must be fully defined");
return 0;
}
/**
- * Convert mark/flag action to Verbs specification.
+ * Validate VXLAN_GPE item.
*
- * @param parser
- * Internal parser structure.
- * @param mark_id
- * Mark identifier.
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] priv
+ * Pointer to the private data structure.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
-mlx5_flow_create_flag_mark(struct mlx5_flow_parse *parser, uint32_t mark_id)
+int
+mlx5_flow_validate_item_vxlan_gpe(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
{
- unsigned int size = sizeof(struct ibv_flow_spec_action_tag);
- struct ibv_flow_spec_action_tag tag = {
- .type = IBV_FLOW_SPEC_ACTION_TAG,
- .size = size,
- .tag_id = mlx5_flow_mark_set(mark_id),
- };
-
- assert(parser->mark);
- mlx5_flow_create_copy(parser, &tag, size);
+ struct priv *priv = dev->data->dev_private;
+ const struct rte_flow_item_vxlan_gpe *spec = item->spec;
+ const struct rte_flow_item_vxlan_gpe *mask = item->mask;
+ int ret;
+ union vni {
+ uint32_t vlan_id;
+ uint8_t vni[4];
+ } id = { .vlan_id = 0, };
+ uint32_t vlan_id = 0;
+
+ if (!priv->config.l3_vxlan_en)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 VXLAN is not enabled by device"
+ " parameter and/or not configured in"
+ " firmware");
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "a tunnel is already present");
+ /*
+ * Verify only UDPv4 is present as defined in
+ * https://tools.ietf.org/html/rfc7348
+ */
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "no outer UDP layer found");
+ if (!mask)
+ mask = &rte_flow_item_vxlan_gpe_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_vxlan_gpe_mask,
+ sizeof(struct rte_flow_item_vxlan_gpe),
+ error);
+ if (ret < 0)
+ return ret;
+ if (spec) {
+ if (spec->protocol)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "VxLAN-GPE protocol"
+ " not supported");
+ memcpy(&id.vni[1], spec->vni, 3);
+ vlan_id = id.vlan_id;
+ memcpy(&id.vni[1], mask->vni, 3);
+ vlan_id &= id.vlan_id;
+ }
+ /*
+ * Tunnel id 0 is equivalent as not adding a VXLAN layer, if only this
+ * layer is defined in the Verbs specification it is interpreted as
+ * wildcard and all packets will match this rule, if it follows a full
+ * stack layer (ex: eth / ipv4 / udp), all packets matching the layers
+ * before will also match this rule. To avoid such situation, VNI 0
+ * is currently refused.
+ */
+ if (!vlan_id)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VXLAN-GPE vni cannot be 0");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VXLAN-GPE tunnel must be fully"
+ " defined");
return 0;
}
/**
- * Convert count action to Verbs specification.
+ * Validate GRE item.
*
- * @param priv
- * Pointer to private structure.
- * @param parser
- * Pointer to MLX5 flow parser structure.
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit flags to mark detected items.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
-mlx5_flow_create_count(struct priv *priv __rte_unused,
- struct mlx5_flow_parse *parser __rte_unused)
+int
+mlx5_flow_validate_item_gre(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
{
-#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
- unsigned int size = sizeof(struct ibv_flow_spec_counter_action);
- struct ibv_counter_set_init_attr init_attr = {0};
- struct ibv_flow_spec_counter_action counter = {
- .type = IBV_FLOW_SPEC_ACTION_COUNT,
- .size = size,
- .counter_set_handle = 0,
- };
+ const struct rte_flow_item_gre *spec __rte_unused = item->spec;
+ const struct rte_flow_item_gre *mask = item->mask;
+ int ret;
- init_attr.counter_set_id = 0;
- parser->cs = mlx5_glue->create_counter_set(priv->ctx, &init_attr);
- if (!parser->cs)
- return EINVAL;
- counter.counter_set_handle = parser->cs->handle;
- mlx5_flow_create_copy(parser, &counter, size);
+ if (target_protocol != 0xff && target_protocol != IPPROTO_GRE)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with this GRE layer");
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "a tunnel is already present");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 Layer is missing");
+ if (!mask)
+ mask = &rte_flow_item_gre_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_gre_mask,
+ sizeof(struct rte_flow_item_gre), error);
+ if (ret < 0)
+ return ret;
+#ifndef HAVE_IBV_DEVICE_MPLS_SUPPORT
+ if (spec && (spec->protocol & mask->protocol))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "without MPLS support the"
+ " specification cannot be used for"
+ " filtering");
#endif
return 0;
}
/**
- * Complete flow rule creation with a drop queue.
+ * Validate MPLS item.
*
- * @param priv
- * Pointer to private structure.
- * @param parser
- * Internal parser structure.
- * @param flow
- * Pointer to the rte_flow.
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
* @param[out] error
- * Perform verbose error reporting if not NULL.
+ * Pointer to error structure.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
-priv_flow_create_action_queue_drop(struct priv *priv,
- struct mlx5_flow_parse *parser,
- struct rte_flow *flow,
- struct rte_flow_error *error)
+int
+mlx5_flow_validate_item_mpls(const struct rte_flow_item *item __rte_unused,
+ uint64_t item_flags __rte_unused,
+ uint8_t target_protocol __rte_unused,
+ struct rte_flow_error *error)
{
- struct ibv_flow_spec_action_drop *drop;
- unsigned int size = sizeof(struct ibv_flow_spec_action_drop);
- int err = 0;
-
- assert(priv->pd);
- assert(priv->ctx);
- flow->drop = 1;
- drop = (void *)((uintptr_t)parser->queue[HASH_RXQ_ETH].ibv_attr +
- parser->queue[HASH_RXQ_ETH].offset);
- *drop = (struct ibv_flow_spec_action_drop){
- .type = IBV_FLOW_SPEC_ACTION_DROP,
- .size = size,
- };
- ++parser->queue[HASH_RXQ_ETH].ibv_attr->num_of_specs;
- parser->queue[HASH_RXQ_ETH].offset += size;
- flow->frxq[HASH_RXQ_ETH].ibv_attr =
- parser->queue[HASH_RXQ_ETH].ibv_attr;
- if (parser->count)
- flow->cs = parser->cs;
- if (!priv->dev->data->dev_started)
- return 0;
- parser->queue[HASH_RXQ_ETH].ibv_attr = NULL;
- flow->frxq[HASH_RXQ_ETH].ibv_flow =
- mlx5_glue->create_flow(priv->flow_drop_queue->qp,
- flow->frxq[HASH_RXQ_ETH].ibv_attr);
- if (!flow->frxq[HASH_RXQ_ETH].ibv_flow) {
- rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
- NULL, "flow rule creation failure");
- err = ENOMEM;
- goto error;
- }
+#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
+ const struct rte_flow_item_mpls *mask = item->mask;
+ int ret;
+
+ if (target_protocol != 0xff && target_protocol != IPPROTO_MPLS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with MPLS layer");
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "a tunnel is already"
+ " present");
+ if (!mask)
+ mask = &rte_flow_item_mpls_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_mpls_mask,
+ sizeof(struct rte_flow_item_mpls), error);
+ if (ret < 0)
+ return ret;
return 0;
-error:
- assert(flow);
- if (flow->frxq[HASH_RXQ_ETH].ibv_flow) {
- claim_zero(mlx5_glue->destroy_flow
- (flow->frxq[HASH_RXQ_ETH].ibv_flow));
- flow->frxq[HASH_RXQ_ETH].ibv_flow = NULL;
- }
- if (flow->frxq[HASH_RXQ_ETH].ibv_attr) {
- rte_free(flow->frxq[HASH_RXQ_ETH].ibv_attr);
- flow->frxq[HASH_RXQ_ETH].ibv_attr = NULL;
- }
- if (flow->cs) {
- claim_zero(mlx5_glue->destroy_counter_set(flow->cs));
- flow->cs = NULL;
- parser->cs = NULL;
- }
- return err;
+#endif
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "MPLS is not supported by Verbs, please"
+ " update.");
}
/**
- * Create hash Rx queues when RSS is enabled.
- *
- * @param priv
- * Pointer to private structure.
- * @param parser
- * Internal parser structure.
- * @param flow
- * Pointer to the rte_flow.
- * @param[out] error
- * Perform verbose error reporting if not NULL.
+ * Validate a flow supported by the NIC.
*
- * @return
- * 0 on success, a errno value otherwise and rte_errno is set.
+ * @see rte_flow_validate()
+ * @see rte_flow_ops
*/
-static int
-priv_flow_create_action_queue_rss(struct priv *priv,
- struct mlx5_flow_parse *parser,
- struct rte_flow *flow,
- struct rte_flow_error *error)
+int
+mlx5_flow_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
{
- unsigned int i;
-
- for (i = 0; i != hash_rxq_init_n; ++i) {
- uint64_t hash_fields;
+ int ret;
- if (!parser->queue[i].ibv_attr)
- continue;
- flow->frxq[i].ibv_attr = parser->queue[i].ibv_attr;
- parser->queue[i].ibv_attr = NULL;
- hash_fields = hash_rxq_init[i].hash_fields;
- if (!priv->dev->data->dev_started)
- continue;
- flow->frxq[i].hrxq =
- mlx5_priv_hrxq_get(priv,
- parser->rss_conf.rss_key,
- parser->rss_conf.rss_key_len,
- hash_fields,
- parser->queues,
- parser->queues_n);
- if (flow->frxq[i].hrxq)
- continue;
- flow->frxq[i].hrxq =
- mlx5_priv_hrxq_new(priv,
- parser->rss_conf.rss_key,
- parser->rss_conf.rss_key_len,
- hash_fields,
- parser->queues,
- parser->queues_n);
- if (!flow->frxq[i].hrxq) {
- rte_flow_error_set(error, ENOMEM,
- RTE_FLOW_ERROR_TYPE_HANDLE,
- NULL, "cannot create hash rxq");
- return ENOMEM;
- }
- }
+ ret = nic_ops.validate(dev, attr, items, actions, error);
+ if (ret < 0)
+ return ret;
return 0;
}
/**
- * Complete flow rule creation.
+ * Get RSS action from the action list.
*
- * @param priv
- * Pointer to private structure.
- * @param parser
- * Internal parser structure.
- * @param flow
- * Pointer to the rte_flow.
- * @param[out] error
- * Perform verbose error reporting if not NULL.
+ * @param[in] actions
+ * Pointer to the list of actions.
*
* @return
- * 0 on success, a errno value otherwise and rte_errno is set.
+ * Pointer to the RSS action if exist, else return NULL.
*/
-static int
-priv_flow_create_action_queue(struct priv *priv,
- struct mlx5_flow_parse *parser,
- struct rte_flow *flow,
- struct rte_flow_error *error)
+static const struct rte_flow_action_rss*
+mlx5_flow_get_rss_action(const struct rte_flow_action actions[])
{
- int err = 0;
- unsigned int i;
- unsigned int flows_n = 0;
-
- assert(priv->pd);
- assert(priv->ctx);
- assert(!parser->drop);
- err = priv_flow_create_action_queue_rss(priv, parser, flow, error);
- if (err)
- goto error;
- if (parser->count)
- flow->cs = parser->cs;
- if (!priv->dev->data->dev_started)
- return 0;
- for (i = 0; i != hash_rxq_init_n; ++i) {
- if (!flow->frxq[i].hrxq)
- continue;
- flow->frxq[i].ibv_flow =
- mlx5_glue->create_flow(flow->frxq[i].hrxq->qp,
- flow->frxq[i].ibv_attr);
- if (!flow->frxq[i].ibv_flow) {
- rte_flow_error_set(error, ENOMEM,
- RTE_FLOW_ERROR_TYPE_HANDLE,
- NULL, "flow rule creation failure");
- err = ENOMEM;
- goto error;
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_RSS:
+ return (const struct rte_flow_action_rss *)
+ actions->conf;
+ default:
+ break;
}
- ++flows_n;
- DEBUG("%p type %d QP %p ibv_flow %p",
- (void *)flow, i,
- (void *)flow->frxq[i].hrxq,
- (void *)flow->frxq[i].ibv_flow);
}
- if (!flows_n) {
- rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_HANDLE,
- NULL, "internal error in flow creation");
- goto error;
- }
- for (i = 0; i != parser->queues_n; ++i) {
- struct mlx5_rxq_data *q =
- (*priv->rxqs)[parser->queues[i]];
+ return NULL;
+}
- q->mark |= parser->mark;
- }
- return 0;
-error:
- assert(flow);
- for (i = 0; i != hash_rxq_init_n; ++i) {
- if (flow->frxq[i].ibv_flow) {
- struct ibv_flow *ibv_flow = flow->frxq[i].ibv_flow;
+static unsigned int
+mlx5_find_graph_root(const struct rte_flow_item pattern[], uint32_t rss_level)
+{
+ const struct rte_flow_item *item;
+ unsigned int has_vlan = 0;
- claim_zero(mlx5_glue->destroy_flow(ibv_flow));
+ for (item = pattern; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
+ if (item->type == RTE_FLOW_ITEM_TYPE_VLAN) {
+ has_vlan = 1;
+ break;
}
- if (flow->frxq[i].hrxq)
- mlx5_priv_hrxq_release(priv, flow->frxq[i].hrxq);
- if (flow->frxq[i].ibv_attr)
- rte_free(flow->frxq[i].ibv_attr);
- }
- if (flow->cs) {
- claim_zero(mlx5_glue->destroy_counter_set(flow->cs));
- flow->cs = NULL;
- parser->cs = NULL;
}
- return err;
+ if (has_vlan)
+ return rss_level < 2 ? MLX5_EXPANSION_ROOT_ETH_VLAN :
+ MLX5_EXPANSION_ROOT_OUTER_ETH_VLAN;
+ return rss_level < 2 ? MLX5_EXPANSION_ROOT :
+ MLX5_EXPANSION_ROOT_OUTER;
}
/**
- * Convert a flow.
+ * Create a flow and add it to @p list.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param list
* Pointer to a TAILQ flow list.
* @param[in] attr
* Flow rule attributes.
- * @param[in] pattern
+ * @param[in] items
* Pattern specification (list terminated by the END pattern item).
* @param[in] actions
* Associated actions (list terminated by the END action).
* Perform verbose error reporting if not NULL.
*
* @return
- * A flow on success, NULL otherwise.
+ * A flow on success, NULL otherwise and rte_errno is set.
*/
static struct rte_flow *
-priv_flow_create(struct priv *priv,
- struct mlx5_flows *list,
- const struct rte_flow_attr *attr,
- const struct rte_flow_item items[],
- const struct rte_flow_action actions[],
- struct rte_flow_error *error)
+mlx5_flow_list_create(struct rte_eth_dev *dev,
+ struct mlx5_flows *list,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
{
- struct mlx5_flow_parse parser = { .create = 1, };
struct rte_flow *flow = NULL;
- unsigned int i;
- int err;
-
- err = priv_flow_convert(priv, attr, items, actions, error, &parser);
- if (err)
- goto exit;
- flow = rte_calloc(__func__, 1,
- sizeof(*flow) + parser.queues_n * sizeof(uint16_t),
- 0);
- if (!flow) {
- rte_flow_error_set(error, ENOMEM,
- RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
- NULL,
- "cannot allocate flow memory");
+ struct mlx5_flow *dev_flow;
+ uint64_t action_flags = 0;
+ uint64_t item_flags = 0;
+ const struct rte_flow_action_rss *rss;
+ union {
+ struct rte_flow_expand_rss buf;
+ uint8_t buffer[2048];
+ } expand_buffer;
+ struct rte_flow_expand_rss *buf = &expand_buffer.buf;
+ int ret;
+ uint32_t i;
+ uint32_t flow_size;
+
+ ret = mlx5_flow_validate(dev, attr, items, actions, error);
+ if (ret < 0)
return NULL;
- }
- /* Copy queues configuration. */
- flow->queues = (uint16_t (*)[])(flow + 1);
- memcpy(flow->queues, parser.queues, parser.queues_n * sizeof(uint16_t));
- flow->queues_n = parser.queues_n;
- flow->mark = parser.mark;
- /* Copy RSS configuration. */
- flow->rss_conf = parser.rss_conf;
- flow->rss_conf.rss_key = flow->rss_key;
- memcpy(flow->rss_key, parser.rss_key, parser.rss_conf.rss_key_len);
- /* finalise the flow. */
- if (parser.drop)
- err = priv_flow_create_action_queue_drop(priv, &parser, flow,
- error);
+ flow_size = sizeof(struct rte_flow);
+ rss = mlx5_flow_get_rss_action(actions);
+ if (rss)
+ flow_size += RTE_ALIGN_CEIL(rss->queue_num * sizeof(uint16_t),
+ sizeof(void *));
else
- err = priv_flow_create_action_queue(priv, &parser, flow, error);
- if (err)
- goto exit;
+ flow_size += RTE_ALIGN_CEIL(sizeof(uint16_t), sizeof(void *));
+ flow = rte_calloc(__func__, 1, flow_size, 0);
+ flow->queue = (void *)(flow + 1);
+ LIST_INIT(&flow->dev_flows);
+ if (rss && rss->types) {
+ unsigned int graph_root;
+
+ graph_root = mlx5_find_graph_root(items, rss->level);
+ ret = rte_flow_expand_rss(buf, sizeof(expand_buffer.buffer),
+ items, rss->types,
+ mlx5_support_expansion,
+ graph_root);
+ assert(ret > 0 &&
+ (unsigned int)ret < sizeof(expand_buffer.buffer));
+ } else {
+ buf->entries = 1;
+ buf->entry[0].pattern = (void *)(uintptr_t)items;
+ }
+ for (i = 0; i < buf->entries; ++i) {
+ dev_flow = nic_ops.prepare(attr, buf->entry[i].pattern,
+ actions, &item_flags,
+ &action_flags, error);
+ if (!dev_flow)
+ goto error;
+ dev_flow->flow = flow;
+ LIST_INSERT_HEAD(&flow->dev_flows, dev_flow, next);
+ ret = nic_ops.translate(dev, dev_flow, attr,
+ buf->entry[i].pattern,
+ actions, error);
+ if (ret < 0)
+ goto error;
+ }
+ if (dev->data->dev_started) {
+ ret = nic_ops.apply(dev, flow, error);
+ if (ret < 0)
+ goto error;
+ }
TAILQ_INSERT_TAIL(list, flow, next);
- DEBUG("Flow created %p", (void *)flow);
+ mlx5_flow_rxq_flags_set(dev, flow);
return flow;
-exit:
- ERROR("flow creation error: %s", error->message);
- for (i = 0; i != hash_rxq_init_n; ++i) {
- if (parser.queue[i].ibv_attr)
- rte_free(parser.queue[i].ibv_attr);
- }
+error:
+ ret = rte_errno; /* Save rte_errno before cleanup. */
+ assert(flow);
+ nic_ops.destroy(dev, flow);
rte_free(flow);
+ rte_errno = ret; /* Restore rte_errno. */
return NULL;
}
-/**
- * Validate a flow supported by the NIC.
- *
- * @see rte_flow_validate()
- * @see rte_flow_ops
- */
-int
-mlx5_flow_validate(struct rte_eth_dev *dev,
- const struct rte_flow_attr *attr,
- const struct rte_flow_item items[],
- const struct rte_flow_action actions[],
- struct rte_flow_error *error)
-{
- struct priv *priv = dev->data->dev_private;
- int ret;
- struct mlx5_flow_parse parser = { .create = 0, };
-
- ret = priv_flow_convert(priv, attr, items, actions, error, &parser);
- return ret;
-}
-
/**
* Create a flow.
*
const struct rte_flow_action actions[],
struct rte_flow_error *error)
{
- struct priv *priv = dev->data->dev_private;
- struct rte_flow *flow;
-
- flow = priv_flow_create(priv, &priv->flows, attr, items, actions,
- error);
- return flow;
+ return mlx5_flow_list_create
+ (dev, &((struct priv *)dev->data->dev_private)->flows,
+ attr, items, actions, error);
}
/**
- * Destroy a flow.
+ * Destroy a flow in a list.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param list
* Pointer to a TAILQ flow list.
* @param[in] flow
* Flow to destroy.
*/
static void
-priv_flow_destroy(struct priv *priv,
- struct mlx5_flows *list,
- struct rte_flow *flow)
+mlx5_flow_list_destroy(struct rte_eth_dev *dev, struct mlx5_flows *list,
+ struct rte_flow *flow)
{
- unsigned int i;
-
- if (flow->drop || !flow->mark)
- goto free;
- for (i = 0; i != flow->queues_n; ++i) {
- struct rte_flow *tmp;
- int mark = 0;
-
- /*
- * To remove the mark from the queue, the queue must not be
- * present in any other marked flow (RSS or not).
- */
- TAILQ_FOREACH(tmp, list, next) {
- unsigned int j;
- uint16_t *tqs = NULL;
- uint16_t tq_n = 0;
-
- if (!tmp->mark)
- continue;
- for (j = 0; j != hash_rxq_init_n; ++j) {
- if (!tmp->frxq[j].hrxq)
- continue;
- tqs = tmp->frxq[j].hrxq->ind_table->queues;
- tq_n = tmp->frxq[j].hrxq->ind_table->queues_n;
- }
- if (!tq_n)
- continue;
- for (j = 0; (j != tq_n) && !mark; j++)
- if (tqs[j] == (*flow->queues)[i])
- mark = 1;
- }
- (*priv->rxqs)[(*flow->queues)[i]]->mark = mark;
- }
-free:
- if (flow->drop) {
- if (flow->frxq[HASH_RXQ_ETH].ibv_flow)
- claim_zero(mlx5_glue->destroy_flow
- (flow->frxq[HASH_RXQ_ETH].ibv_flow));
- rte_free(flow->frxq[HASH_RXQ_ETH].ibv_attr);
- } else {
- for (i = 0; i != hash_rxq_init_n; ++i) {
- struct mlx5_flow *frxq = &flow->frxq[i];
-
- if (frxq->ibv_flow)
- claim_zero(mlx5_glue->destroy_flow
- (frxq->ibv_flow));
- if (frxq->hrxq)
- mlx5_priv_hrxq_release(priv, frxq->hrxq);
- if (frxq->ibv_attr)
- rte_free(frxq->ibv_attr);
- }
- }
- if (flow->cs) {
- claim_zero(mlx5_glue->destroy_counter_set(flow->cs));
- flow->cs = NULL;
- }
+ nic_ops.destroy(dev, flow);
TAILQ_REMOVE(list, flow, next);
- DEBUG("Flow destroyed %p", (void *)flow);
+ /*
+ * Update RX queue flags only if port is started, otherwise it is
+ * already clean.
+ */
+ if (dev->data->dev_started)
+ mlx5_flow_rxq_flags_trim(dev, flow);
rte_free(flow);
}
/**
* Destroy all flows.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param list
* Pointer to a TAILQ flow list.
*/
void
-priv_flow_flush(struct priv *priv, struct mlx5_flows *list)
+mlx5_flow_list_flush(struct rte_eth_dev *dev, struct mlx5_flows *list)
{
while (!TAILQ_EMPTY(list)) {
struct rte_flow *flow;
flow = TAILQ_FIRST(list);
- priv_flow_destroy(priv, list, flow);
- }
-}
-
-/**
- * Create drop queue.
- *
- * @param priv
- * Pointer to private structure.
- *
- * @return
- * 0 on success.
- */
-int
-priv_flow_create_drop_queue(struct priv *priv)
-{
- struct mlx5_hrxq_drop *fdq = NULL;
-
- assert(priv->pd);
- assert(priv->ctx);
- fdq = rte_calloc(__func__, 1, sizeof(*fdq), 0);
- if (!fdq) {
- WARN("cannot allocate memory for drop queue");
- goto error;
- }
- fdq->cq = mlx5_glue->create_cq(priv->ctx, 1, NULL, NULL, 0);
- if (!fdq->cq) {
- WARN("cannot allocate CQ for drop queue");
- goto error;
- }
- fdq->wq = mlx5_glue->create_wq
- (priv->ctx,
- &(struct ibv_wq_init_attr){
- .wq_type = IBV_WQT_RQ,
- .max_wr = 1,
- .max_sge = 1,
- .pd = priv->pd,
- .cq = fdq->cq,
- });
- if (!fdq->wq) {
- WARN("cannot allocate WQ for drop queue");
- goto error;
- }
- fdq->ind_table = mlx5_glue->create_rwq_ind_table
- (priv->ctx,
- &(struct ibv_rwq_ind_table_init_attr){
- .log_ind_tbl_size = 0,
- .ind_tbl = &fdq->wq,
- .comp_mask = 0,
- });
- if (!fdq->ind_table) {
- WARN("cannot allocate indirection table for drop queue");
- goto error;
+ mlx5_flow_list_destroy(dev, list, flow);
}
- fdq->qp = mlx5_glue->create_qp_ex
- (priv->ctx,
- &(struct ibv_qp_init_attr_ex){
- .qp_type = IBV_QPT_RAW_PACKET,
- .comp_mask =
- IBV_QP_INIT_ATTR_PD |
- IBV_QP_INIT_ATTR_IND_TABLE |
- IBV_QP_INIT_ATTR_RX_HASH,
- .rx_hash_conf = (struct ibv_rx_hash_conf){
- .rx_hash_function =
- IBV_RX_HASH_FUNC_TOEPLITZ,
- .rx_hash_key_len = rss_hash_default_key_len,
- .rx_hash_key = rss_hash_default_key,
- .rx_hash_fields_mask = 0,
- },
- .rwq_ind_tbl = fdq->ind_table,
- .pd = priv->pd
- });
- if (!fdq->qp) {
- WARN("cannot allocate QP for drop queue");
- goto error;
- }
- priv->flow_drop_queue = fdq;
- return 0;
-error:
- if (fdq->qp)
- claim_zero(mlx5_glue->destroy_qp(fdq->qp));
- if (fdq->ind_table)
- claim_zero(mlx5_glue->destroy_rwq_ind_table(fdq->ind_table));
- if (fdq->wq)
- claim_zero(mlx5_glue->destroy_wq(fdq->wq));
- if (fdq->cq)
- claim_zero(mlx5_glue->destroy_cq(fdq->cq));
- if (fdq)
- rte_free(fdq);
- priv->flow_drop_queue = NULL;
- return -1;
-}
-
-/**
- * Delete drop queue.
- *
- * @param priv
- * Pointer to private structure.
- */
-void
-priv_flow_delete_drop_queue(struct priv *priv)
-{
- struct mlx5_hrxq_drop *fdq = priv->flow_drop_queue;
-
- if (!fdq)
- return;
- if (fdq->qp)
- claim_zero(mlx5_glue->destroy_qp(fdq->qp));
- if (fdq->ind_table)
- claim_zero(mlx5_glue->destroy_rwq_ind_table(fdq->ind_table));
- if (fdq->wq)
- claim_zero(mlx5_glue->destroy_wq(fdq->wq));
- if (fdq->cq)
- claim_zero(mlx5_glue->destroy_cq(fdq->cq));
- rte_free(fdq);
- priv->flow_drop_queue = NULL;
}
/**
* Remove all flows.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param list
* Pointer to a TAILQ flow list.
*/
void
-priv_flow_stop(struct priv *priv, struct mlx5_flows *list)
+mlx5_flow_stop(struct rte_eth_dev *dev, struct mlx5_flows *list)
{
struct rte_flow *flow;
- TAILQ_FOREACH_REVERSE(flow, list, mlx5_flows, next) {
- unsigned int i;
- struct mlx5_ind_table_ibv *ind_tbl = NULL;
-
- if (flow->drop) {
- if (!flow->frxq[HASH_RXQ_ETH].ibv_flow)
- continue;
- claim_zero(mlx5_glue->destroy_flow
- (flow->frxq[HASH_RXQ_ETH].ibv_flow));
- flow->frxq[HASH_RXQ_ETH].ibv_flow = NULL;
- DEBUG("Flow %p removed", (void *)flow);
- /* Next flow. */
- continue;
- }
- /* Verify the flow has not already been cleaned. */
- for (i = 0; i != hash_rxq_init_n; ++i) {
- if (!flow->frxq[i].ibv_flow)
- continue;
- /*
- * Indirection table may be necessary to remove the
- * flags in the Rx queues.
- * This helps to speed-up the process by avoiding
- * another loop.
- */
- ind_tbl = flow->frxq[i].hrxq->ind_table;
- break;
- }
- if (i == hash_rxq_init_n)
- return;
- if (flow->mark) {
- assert(ind_tbl);
- for (i = 0; i != ind_tbl->queues_n; ++i)
- (*priv->rxqs)[ind_tbl->queues[i]]->mark = 0;
- }
- for (i = 0; i != hash_rxq_init_n; ++i) {
- if (!flow->frxq[i].ibv_flow)
- continue;
- claim_zero(mlx5_glue->destroy_flow
- (flow->frxq[i].ibv_flow));
- flow->frxq[i].ibv_flow = NULL;
- mlx5_priv_hrxq_release(priv, flow->frxq[i].hrxq);
- flow->frxq[i].hrxq = NULL;
- }
- DEBUG("Flow %p removed", (void *)flow);
- }
+ TAILQ_FOREACH_REVERSE(flow, list, mlx5_flows, next)
+ nic_ops.remove(dev, flow);
+ mlx5_flow_rxq_flags_clear(dev);
}
/**
* Add all flows.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param list
* Pointer to a TAILQ flow list.
*
* @return
- * 0 on success, a errno value otherwise and rte_errno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-priv_flow_start(struct priv *priv, struct mlx5_flows *list)
+mlx5_flow_start(struct rte_eth_dev *dev, struct mlx5_flows *list)
{
struct rte_flow *flow;
+ struct rte_flow_error error;
+ int ret = 0;
TAILQ_FOREACH(flow, list, next) {
- unsigned int i;
-
- if (flow->drop) {
- flow->frxq[HASH_RXQ_ETH].ibv_flow =
- mlx5_glue->create_flow
- (priv->flow_drop_queue->qp,
- flow->frxq[HASH_RXQ_ETH].ibv_attr);
- if (!flow->frxq[HASH_RXQ_ETH].ibv_flow) {
- DEBUG("Flow %p cannot be applied",
- (void *)flow);
- rte_errno = EINVAL;
- return rte_errno;
- }
- DEBUG("Flow %p applied", (void *)flow);
- /* Next flow. */
- continue;
- }
- for (i = 0; i != hash_rxq_init_n; ++i) {
- if (!flow->frxq[i].ibv_attr)
- continue;
- flow->frxq[i].hrxq =
- mlx5_priv_hrxq_get(priv, flow->rss_conf.rss_key,
- flow->rss_conf.rss_key_len,
- hash_rxq_init[i].hash_fields,
- (*flow->queues),
- flow->queues_n);
- if (flow->frxq[i].hrxq)
- goto flow_create;
- flow->frxq[i].hrxq =
- mlx5_priv_hrxq_new(priv, flow->rss_conf.rss_key,
- flow->rss_conf.rss_key_len,
- hash_rxq_init[i].hash_fields,
- (*flow->queues),
- flow->queues_n);
- if (!flow->frxq[i].hrxq) {
- DEBUG("Flow %p cannot be applied",
- (void *)flow);
- rte_errno = EINVAL;
- return rte_errno;
- }
-flow_create:
- flow->frxq[i].ibv_flow =
- mlx5_glue->create_flow(flow->frxq[i].hrxq->qp,
- flow->frxq[i].ibv_attr);
- if (!flow->frxq[i].ibv_flow) {
- DEBUG("Flow %p cannot be applied",
- (void *)flow);
- rte_errno = EINVAL;
- return rte_errno;
- }
- DEBUG("Flow %p applied", (void *)flow);
- }
- if (!flow->mark)
- continue;
- for (i = 0; i != flow->queues_n; ++i)
- (*priv->rxqs)[(*flow->queues)[i]]->mark = 1;
+ ret = nic_ops.apply(dev, flow, &error);
+ if (ret < 0)
+ goto error;
+ mlx5_flow_rxq_flags_set(dev, flow);
}
return 0;
+error:
+ ret = rte_errno; /* Save rte_errno before cleanup. */
+ mlx5_flow_stop(dev, list);
+ rte_errno = ret; /* Restore rte_errno. */
+ return -rte_errno;
}
/**
* Verify the flow list is empty
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
*
* @return the number of flows not released.
*/
int
-priv_flow_verify(struct priv *priv)
+mlx5_flow_verify(struct rte_eth_dev *dev)
{
+ struct priv *priv = dev->data->dev_private;
struct rte_flow *flow;
int ret = 0;
TAILQ_FOREACH(flow, &priv->flows, next) {
- DEBUG("%p: flow %p still referenced", (void *)priv,
- (void *)flow);
+ DRV_LOG(DEBUG, "port %u flow %p still referenced",
+ dev->data->port_id, (void *)flow);
++ret;
}
return ret;
* A VLAN flow mask to apply.
*
* @return
- * 0 on success.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_ctrl_flow_vlan(struct rte_eth_dev *dev,
struct priv *priv = dev->data->dev_private;
const struct rte_flow_attr attr = {
.ingress = 1,
- .priority = MLX5_CTRL_FLOW_PRIORITY,
+ .priority = MLX5_FLOW_PRIO_RSVD,
};
struct rte_flow_item items[] = {
{
},
{
.type = (vlan_spec) ? RTE_FLOW_ITEM_TYPE_VLAN :
- RTE_FLOW_ITEM_TYPE_END,
+ RTE_FLOW_ITEM_TYPE_END,
.spec = vlan_spec,
.last = NULL,
.mask = vlan_mask,
.type = RTE_FLOW_ITEM_TYPE_END,
},
};
+ uint16_t queue[priv->reta_idx_n];
+ struct rte_flow_action_rss action_rss = {
+ .func = RTE_ETH_HASH_FUNCTION_DEFAULT,
+ .level = 0,
+ .types = priv->rss_conf.rss_hf,
+ .key_len = priv->rss_conf.rss_key_len,
+ .queue_num = priv->reta_idx_n,
+ .key = priv->rss_conf.rss_key,
+ .queue = queue,
+ };
struct rte_flow_action actions[] = {
{
.type = RTE_FLOW_ACTION_TYPE_RSS,
+ .conf = &action_rss,
},
{
.type = RTE_FLOW_ACTION_TYPE_END,
struct rte_flow *flow;
struct rte_flow_error error;
unsigned int i;
- union {
- struct rte_flow_action_rss rss;
- struct {
- const struct rte_eth_rss_conf *rss_conf;
- uint16_t num;
- uint16_t queue[RTE_MAX_QUEUES_PER_PORT];
- } local;
- } action_rss;
-
- if (!priv->reta_idx_n)
- return EINVAL;
+
+ if (!priv->reta_idx_n) {
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
for (i = 0; i != priv->reta_idx_n; ++i)
- action_rss.local.queue[i] = (*priv->reta_idx)[i];
- action_rss.local.rss_conf = &priv->rss_conf;
- action_rss.local.num = priv->reta_idx_n;
- actions[0].conf = (const void *)&action_rss.rss;
- flow = priv_flow_create(priv, &priv->ctrl_flows, &attr, items, actions,
- &error);
+ queue[i] = (*priv->reta_idx)[i];
+ flow = mlx5_flow_list_create(dev, &priv->ctrl_flows, &attr, items,
+ actions, &error);
if (!flow)
- return rte_errno;
+ return -rte_errno;
return 0;
}
* An Ethernet flow mask to apply.
*
* @return
- * 0 on success.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_ctrl_flow(struct rte_eth_dev *dev,
{
struct priv *priv = dev->data->dev_private;
- priv_flow_destroy(priv, &priv->flows, flow);
+ mlx5_flow_list_destroy(dev, &priv->flows, flow);
return 0;
}
{
struct priv *priv = dev->data->dev_private;
- priv_flow_flush(priv, &priv->flows);
+ mlx5_flow_list_flush(dev, &priv->flows);
return 0;
}
-#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
/**
- * Query flow counter.
- *
- * @param cs
- * the counter set.
- * @param counter_value
- * returned data from the counter.
+ * Isolated mode.
*
- * @return
- * 0 on success, a errno value otherwise and rte_errno is set.
+ * @see rte_flow_isolate()
+ * @see rte_flow_ops
*/
-static int
-priv_flow_query_count(struct ibv_counter_set *cs,
- struct mlx5_flow_counter_stats *counter_stats,
- struct rte_flow_query_count *query_count,
- struct rte_flow_error *error)
+int
+mlx5_flow_isolate(struct rte_eth_dev *dev,
+ int enable,
+ struct rte_flow_error *error)
{
- uint64_t counters[2];
- struct ibv_query_counter_set_attr query_cs_attr = {
- .cs = cs,
- .query_flags = IBV_COUNTER_SET_FORCE_UPDATE,
- };
- struct ibv_counter_set_data query_out = {
- .out = counters,
- .outlen = 2 * sizeof(uint64_t),
- };
- int res = mlx5_glue->query_counter_set(&query_cs_attr, &query_out);
+ struct priv *priv = dev->data->dev_private;
- if (res) {
- rte_flow_error_set(error, -res,
+ if (dev->data->dev_started) {
+ rte_flow_error_set(error, EBUSY,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
- "cannot read counter");
- return -res;
- }
- query_count->hits_set = 1;
- query_count->bytes_set = 1;
- query_count->hits = counters[0] - counter_stats->hits;
- query_count->bytes = counters[1] - counter_stats->bytes;
- if (query_count->reset) {
- counter_stats->hits = counters[0];
- counter_stats->bytes = counters[1];
+ "port must be stopped first");
+ return -rte_errno;
}
+ priv->isolated = !!enable;
+ if (enable)
+ dev->dev_ops = &mlx5_dev_ops_isolate;
+ else
+ dev->dev_ops = &mlx5_dev_ops;
return 0;
}
/**
- * Query a flows.
+ * Query flow counter.
*
- * @see rte_flow_query()
- * @see rte_flow_ops
+ * @param flow
+ * Pointer to the flow.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-int
-mlx5_flow_query(struct rte_eth_dev *dev __rte_unused,
- struct rte_flow *flow,
- enum rte_flow_action_type action __rte_unused,
- void *data,
- struct rte_flow_error *error)
+static int
+mlx5_flow_query_count(struct rte_flow *flow __rte_unused,
+ void *data __rte_unused,
+ struct rte_flow_error *error)
{
- int res = EINVAL;
+#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
+ if (flow->actions & MLX5_FLOW_ACTION_COUNT) {
+ struct rte_flow_query_count *qc = data;
+ uint64_t counters[2] = {0, 0};
+ struct ibv_query_counter_set_attr query_cs_attr = {
+ .cs = flow->counter->cs,
+ .query_flags = IBV_COUNTER_SET_FORCE_UPDATE,
+ };
+ struct ibv_counter_set_data query_out = {
+ .out = counters,
+ .outlen = 2 * sizeof(uint64_t),
+ };
+ int err = mlx5_glue->query_counter_set(&query_cs_attr,
+ &query_out);
- if (flow->cs) {
- res = priv_flow_query_count(flow->cs,
- &flow->counter_stats,
- (struct rte_flow_query_count *)data,
- error);
- } else {
- rte_flow_error_set(error, res,
- RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
- NULL,
- "no counter found for flow");
+ if (err)
+ return rte_flow_error_set
+ (error, err,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "cannot read counter");
+ qc->hits_set = 1;
+ qc->bytes_set = 1;
+ qc->hits = counters[0] - flow->counter->hits;
+ qc->bytes = counters[1] - flow->counter->bytes;
+ if (qc->reset) {
+ flow->counter->hits = counters[0];
+ flow->counter->bytes = counters[1];
+ }
+ return 0;
}
- return -res;
-}
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "flow does not have counter");
#endif
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "counters are not available");
+}
/**
- * Isolated mode.
+ * Query a flows.
*
- * @see rte_flow_isolate()
+ * @see rte_flow_query()
* @see rte_flow_ops
*/
int
-mlx5_flow_isolate(struct rte_eth_dev *dev,
- int enable,
- struct rte_flow_error *error)
+mlx5_flow_query(struct rte_eth_dev *dev __rte_unused,
+ struct rte_flow *flow,
+ const struct rte_flow_action *actions,
+ void *data,
+ struct rte_flow_error *error)
{
- struct priv *priv = dev->data->dev_private;
+ int ret = 0;
- if (dev->data->dev_started) {
- rte_flow_error_set(error, EBUSY,
- RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
- NULL,
- "port must be stopped first");
- return -rte_errno;
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_VOID:
+ break;
+ case RTE_FLOW_ACTION_TYPE_COUNT:
+ ret = mlx5_flow_query_count(flow, data, error);
+ break;
+ default:
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ actions,
+ "action not supported");
+ }
+ if (ret < 0)
+ return ret;
}
- priv->isolated = !!enable;
- if (enable)
- priv->dev->dev_ops = &mlx5_dev_ops_isolate;
- else
- priv->dev->dev_ops = &mlx5_dev_ops;
return 0;
}
/**
* Convert a flow director filter to a generic flow.
*
- * @param priv
- * Private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param fdir_filter
* Flow director filter to add.
* @param attributes
* Generic flow parameters structure.
*
* @return
- * 0 on success, errno value on error.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-priv_fdir_filter_convert(struct priv *priv,
+mlx5_fdir_filter_convert(struct rte_eth_dev *dev,
const struct rte_eth_fdir_filter *fdir_filter,
struct mlx5_fdir *attributes)
{
+ struct priv *priv = dev->data->dev_private;
const struct rte_eth_fdir_input *input = &fdir_filter->input;
+ const struct rte_eth_fdir_masks *mask =
+ &dev->data->dev_conf.fdir_conf.mask;
/* Validate queue number. */
if (fdir_filter->action.rx_queue >= priv->rxqs_n) {
- ERROR("invalid queue number %d", fdir_filter->action.rx_queue);
- return EINVAL;
+ DRV_LOG(ERR, "port %u invalid queue number %d",
+ dev->data->port_id, fdir_filter->action.rx_queue);
+ rte_errno = EINVAL;
+ return -rte_errno;
}
attributes->attr.ingress = 1;
attributes->items[0] = (struct rte_flow_item) {
};
break;
default:
- ERROR("invalid behavior %d", fdir_filter->action.behavior);
- return ENOTSUP;
+ DRV_LOG(ERR, "port %u invalid behavior %d",
+ dev->data->port_id,
+ fdir_filter->action.behavior);
+ rte_errno = ENOTSUP;
+ return -rte_errno;
}
attributes->queue.index = fdir_filter->action.rx_queue;
+ /* Handle L3. */
switch (fdir_filter->input.flow_type) {
case RTE_ETH_FLOW_NONFRAG_IPV4_UDP:
+ case RTE_ETH_FLOW_NONFRAG_IPV4_TCP:
+ case RTE_ETH_FLOW_NONFRAG_IPV4_OTHER:
attributes->l3.ipv4.hdr = (struct ipv4_hdr){
- .src_addr = input->flow.udp4_flow.ip.src_ip,
- .dst_addr = input->flow.udp4_flow.ip.dst_ip,
- .time_to_live = input->flow.udp4_flow.ip.ttl,
- .type_of_service = input->flow.udp4_flow.ip.tos,
- .next_proto_id = input->flow.udp4_flow.ip.proto,
+ .src_addr = input->flow.ip4_flow.src_ip,
+ .dst_addr = input->flow.ip4_flow.dst_ip,
+ .time_to_live = input->flow.ip4_flow.ttl,
+ .type_of_service = input->flow.ip4_flow.tos,
};
- attributes->l4.udp.hdr = (struct udp_hdr){
- .src_port = input->flow.udp4_flow.src_port,
- .dst_port = input->flow.udp4_flow.dst_port,
+ attributes->l3_mask.ipv4.hdr = (struct ipv4_hdr){
+ .src_addr = mask->ipv4_mask.src_ip,
+ .dst_addr = mask->ipv4_mask.dst_ip,
+ .time_to_live = mask->ipv4_mask.ttl,
+ .type_of_service = mask->ipv4_mask.tos,
+ .next_proto_id = mask->ipv4_mask.proto,
};
attributes->items[1] = (struct rte_flow_item){
.type = RTE_FLOW_ITEM_TYPE_IPV4,
.spec = &attributes->l3,
- .mask = &attributes->l3,
+ .mask = &attributes->l3_mask,
+ };
+ break;
+ case RTE_ETH_FLOW_NONFRAG_IPV6_UDP:
+ case RTE_ETH_FLOW_NONFRAG_IPV6_TCP:
+ case RTE_ETH_FLOW_NONFRAG_IPV6_OTHER:
+ attributes->l3.ipv6.hdr = (struct ipv6_hdr){
+ .hop_limits = input->flow.ipv6_flow.hop_limits,
+ .proto = input->flow.ipv6_flow.proto,
+ };
+
+ memcpy(attributes->l3.ipv6.hdr.src_addr,
+ input->flow.ipv6_flow.src_ip,
+ RTE_DIM(attributes->l3.ipv6.hdr.src_addr));
+ memcpy(attributes->l3.ipv6.hdr.dst_addr,
+ input->flow.ipv6_flow.dst_ip,
+ RTE_DIM(attributes->l3.ipv6.hdr.src_addr));
+ memcpy(attributes->l3_mask.ipv6.hdr.src_addr,
+ mask->ipv6_mask.src_ip,
+ RTE_DIM(attributes->l3_mask.ipv6.hdr.src_addr));
+ memcpy(attributes->l3_mask.ipv6.hdr.dst_addr,
+ mask->ipv6_mask.dst_ip,
+ RTE_DIM(attributes->l3_mask.ipv6.hdr.src_addr));
+ attributes->items[1] = (struct rte_flow_item){
+ .type = RTE_FLOW_ITEM_TYPE_IPV6,
+ .spec = &attributes->l3,
+ .mask = &attributes->l3_mask,
+ };
+ break;
+ default:
+ DRV_LOG(ERR, "port %u invalid flow type%d",
+ dev->data->port_id, fdir_filter->input.flow_type);
+ rte_errno = ENOTSUP;
+ return -rte_errno;
+ }
+ /* Handle L4. */
+ switch (fdir_filter->input.flow_type) {
+ case RTE_ETH_FLOW_NONFRAG_IPV4_UDP:
+ attributes->l4.udp.hdr = (struct udp_hdr){
+ .src_port = input->flow.udp4_flow.src_port,
+ .dst_port = input->flow.udp4_flow.dst_port,
+ };
+ attributes->l4_mask.udp.hdr = (struct udp_hdr){
+ .src_port = mask->src_port_mask,
+ .dst_port = mask->dst_port_mask,
};
attributes->items[2] = (struct rte_flow_item){
.type = RTE_FLOW_ITEM_TYPE_UDP,
.spec = &attributes->l4,
- .mask = &attributes->l4,
+ .mask = &attributes->l4_mask,
};
break;
case RTE_ETH_FLOW_NONFRAG_IPV4_TCP:
- attributes->l3.ipv4.hdr = (struct ipv4_hdr){
- .src_addr = input->flow.tcp4_flow.ip.src_ip,
- .dst_addr = input->flow.tcp4_flow.ip.dst_ip,
- .time_to_live = input->flow.tcp4_flow.ip.ttl,
- .type_of_service = input->flow.tcp4_flow.ip.tos,
- .next_proto_id = input->flow.tcp4_flow.ip.proto,
- };
attributes->l4.tcp.hdr = (struct tcp_hdr){
.src_port = input->flow.tcp4_flow.src_port,
.dst_port = input->flow.tcp4_flow.dst_port,
};
- attributes->items[1] = (struct rte_flow_item){
- .type = RTE_FLOW_ITEM_TYPE_IPV4,
- .spec = &attributes->l3,
- .mask = &attributes->l3,
+ attributes->l4_mask.tcp.hdr = (struct tcp_hdr){
+ .src_port = mask->src_port_mask,
+ .dst_port = mask->dst_port_mask,
};
attributes->items[2] = (struct rte_flow_item){
.type = RTE_FLOW_ITEM_TYPE_TCP,
.spec = &attributes->l4,
- .mask = &attributes->l4,
- };
- break;
- case RTE_ETH_FLOW_NONFRAG_IPV4_OTHER:
- attributes->l3.ipv4.hdr = (struct ipv4_hdr){
- .src_addr = input->flow.ip4_flow.src_ip,
- .dst_addr = input->flow.ip4_flow.dst_ip,
- .time_to_live = input->flow.ip4_flow.ttl,
- .type_of_service = input->flow.ip4_flow.tos,
- .next_proto_id = input->flow.ip4_flow.proto,
- };
- attributes->items[1] = (struct rte_flow_item){
- .type = RTE_FLOW_ITEM_TYPE_IPV4,
- .spec = &attributes->l3,
- .mask = &attributes->l3,
+ .mask = &attributes->l4_mask,
};
break;
case RTE_ETH_FLOW_NONFRAG_IPV6_UDP:
- attributes->l3.ipv6.hdr = (struct ipv6_hdr){
- .hop_limits = input->flow.udp6_flow.ip.hop_limits,
- .proto = input->flow.udp6_flow.ip.proto,
- };
- memcpy(attributes->l3.ipv6.hdr.src_addr,
- input->flow.udp6_flow.ip.src_ip,
- RTE_DIM(attributes->l3.ipv6.hdr.src_addr));
- memcpy(attributes->l3.ipv6.hdr.dst_addr,
- input->flow.udp6_flow.ip.dst_ip,
- RTE_DIM(attributes->l3.ipv6.hdr.src_addr));
attributes->l4.udp.hdr = (struct udp_hdr){
.src_port = input->flow.udp6_flow.src_port,
.dst_port = input->flow.udp6_flow.dst_port,
};
- attributes->items[1] = (struct rte_flow_item){
- .type = RTE_FLOW_ITEM_TYPE_IPV6,
- .spec = &attributes->l3,
- .mask = &attributes->l3,
+ attributes->l4_mask.udp.hdr = (struct udp_hdr){
+ .src_port = mask->src_port_mask,
+ .dst_port = mask->dst_port_mask,
};
attributes->items[2] = (struct rte_flow_item){
.type = RTE_FLOW_ITEM_TYPE_UDP,
.spec = &attributes->l4,
- .mask = &attributes->l4,
+ .mask = &attributes->l4_mask,
};
break;
case RTE_ETH_FLOW_NONFRAG_IPV6_TCP:
- attributes->l3.ipv6.hdr = (struct ipv6_hdr){
- .hop_limits = input->flow.tcp6_flow.ip.hop_limits,
- .proto = input->flow.tcp6_flow.ip.proto,
- };
- memcpy(attributes->l3.ipv6.hdr.src_addr,
- input->flow.tcp6_flow.ip.src_ip,
- RTE_DIM(attributes->l3.ipv6.hdr.src_addr));
- memcpy(attributes->l3.ipv6.hdr.dst_addr,
- input->flow.tcp6_flow.ip.dst_ip,
- RTE_DIM(attributes->l3.ipv6.hdr.src_addr));
attributes->l4.tcp.hdr = (struct tcp_hdr){
.src_port = input->flow.tcp6_flow.src_port,
.dst_port = input->flow.tcp6_flow.dst_port,
};
- attributes->items[1] = (struct rte_flow_item){
- .type = RTE_FLOW_ITEM_TYPE_IPV6,
- .spec = &attributes->l3,
- .mask = &attributes->l3,
+ attributes->l4_mask.tcp.hdr = (struct tcp_hdr){
+ .src_port = mask->src_port_mask,
+ .dst_port = mask->dst_port_mask,
};
attributes->items[2] = (struct rte_flow_item){
.type = RTE_FLOW_ITEM_TYPE_TCP,
.spec = &attributes->l4,
- .mask = &attributes->l4,
+ .mask = &attributes->l4_mask,
};
break;
+ case RTE_ETH_FLOW_NONFRAG_IPV4_OTHER:
case RTE_ETH_FLOW_NONFRAG_IPV6_OTHER:
- attributes->l3.ipv6.hdr = (struct ipv6_hdr){
- .hop_limits = input->flow.ipv6_flow.hop_limits,
- .proto = input->flow.ipv6_flow.proto,
- };
- memcpy(attributes->l3.ipv6.hdr.src_addr,
- input->flow.ipv6_flow.src_ip,
- RTE_DIM(attributes->l3.ipv6.hdr.src_addr));
- memcpy(attributes->l3.ipv6.hdr.dst_addr,
- input->flow.ipv6_flow.dst_ip,
- RTE_DIM(attributes->l3.ipv6.hdr.src_addr));
- attributes->items[1] = (struct rte_flow_item){
- .type = RTE_FLOW_ITEM_TYPE_IPV6,
- .spec = &attributes->l3,
- .mask = &attributes->l3,
- };
break;
default:
- ERROR("invalid flow type%d",
- fdir_filter->input.flow_type);
- return ENOTSUP;
+ DRV_LOG(ERR, "port %u invalid flow type%d",
+ dev->data->port_id, fdir_filter->input.flow_type);
+ rte_errno = ENOTSUP;
+ return -rte_errno;
}
return 0;
}
/**
* Add new flow director filter and store it in list.
*
- * @param priv
- * Private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param fdir_filter
* Flow director filter to add.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-priv_fdir_filter_add(struct priv *priv,
+mlx5_fdir_filter_add(struct rte_eth_dev *dev,
const struct rte_eth_fdir_filter *fdir_filter)
{
+ struct priv *priv = dev->data->dev_private;
struct mlx5_fdir attributes = {
.attr.group = 0,
.l2_mask = {
.type = 0,
},
};
- struct mlx5_flow_parse parser = {
- .layer = HASH_RXQ_ETH,
- };
struct rte_flow_error error;
struct rte_flow *flow;
int ret;
- ret = priv_fdir_filter_convert(priv, fdir_filter, &attributes);
+ ret = mlx5_fdir_filter_convert(dev, fdir_filter, &attributes);
if (ret)
- return -ret;
- ret = priv_flow_convert(priv, &attributes.attr, attributes.items,
- attributes.actions, &error, &parser);
- if (ret)
- return -ret;
- flow = priv_flow_create(priv,
- &priv->flows,
- &attributes.attr,
- attributes.items,
- attributes.actions,
- &error);
+ return ret;
+ flow = mlx5_flow_list_create(dev, &priv->flows, &attributes.attr,
+ attributes.items, attributes.actions,
+ &error);
if (flow) {
- DEBUG("FDIR created %p", (void *)flow);
+ DRV_LOG(DEBUG, "port %u FDIR created %p", dev->data->port_id,
+ (void *)flow);
return 0;
}
- return ENOTSUP;
+ return -rte_errno;
}
/**
* Delete specific filter.
*
- * @param priv
- * Private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param fdir_filter
* Filter to be deleted.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-priv_fdir_filter_delete(struct priv *priv,
- const struct rte_eth_fdir_filter *fdir_filter)
+mlx5_fdir_filter_delete(struct rte_eth_dev *dev __rte_unused,
+ const struct rte_eth_fdir_filter *fdir_filter
+ __rte_unused)
{
- struct mlx5_fdir attributes = {
- .attr.group = 0,
- };
- struct mlx5_flow_parse parser = {
- .create = 1,
- .layer = HASH_RXQ_ETH,
- };
- struct rte_flow_error error;
- struct rte_flow *flow;
- unsigned int i;
- int ret;
-
- ret = priv_fdir_filter_convert(priv, fdir_filter, &attributes);
- if (ret)
- return -ret;
- ret = priv_flow_convert(priv, &attributes.attr, attributes.items,
- attributes.actions, &error, &parser);
- if (ret)
- goto exit;
- /*
- * Special case for drop action which is only set in the
- * specifications when the flow is created. In this situation the
- * drop specification is missing.
- */
- if (parser.drop) {
- struct ibv_flow_spec_action_drop *drop;
-
- drop = (void *)((uintptr_t)parser.queue[HASH_RXQ_ETH].ibv_attr +
- parser.queue[HASH_RXQ_ETH].offset);
- *drop = (struct ibv_flow_spec_action_drop){
- .type = IBV_FLOW_SPEC_ACTION_DROP,
- .size = sizeof(struct ibv_flow_spec_action_drop),
- };
- parser.queue[HASH_RXQ_ETH].ibv_attr->num_of_specs++;
- }
- TAILQ_FOREACH(flow, &priv->flows, next) {
- struct ibv_flow_attr *attr;
- struct ibv_spec_header *attr_h;
- void *spec;
- struct ibv_flow_attr *flow_attr;
- struct ibv_spec_header *flow_h;
- void *flow_spec;
- unsigned int specs_n;
-
- attr = parser.queue[HASH_RXQ_ETH].ibv_attr;
- flow_attr = flow->frxq[HASH_RXQ_ETH].ibv_attr;
- /* Compare first the attributes. */
- if (memcmp(attr, flow_attr, sizeof(struct ibv_flow_attr)))
- continue;
- if (attr->num_of_specs == 0)
- continue;
- spec = (void *)((uintptr_t)attr +
- sizeof(struct ibv_flow_attr));
- flow_spec = (void *)((uintptr_t)flow_attr +
- sizeof(struct ibv_flow_attr));
- specs_n = RTE_MIN(attr->num_of_specs, flow_attr->num_of_specs);
- for (i = 0; i != specs_n; ++i) {
- attr_h = spec;
- flow_h = flow_spec;
- if (memcmp(spec, flow_spec,
- RTE_MIN(attr_h->size, flow_h->size)))
- goto wrong_flow;
- spec = (void *)((uintptr_t)spec + attr_h->size);
- flow_spec = (void *)((uintptr_t)flow_spec +
- flow_h->size);
- }
- /* At this point, the flow match. */
- break;
-wrong_flow:
- /* The flow does not match. */
- continue;
- }
- if (flow)
- priv_flow_destroy(priv, &priv->flows, flow);
-exit:
- for (i = 0; i != hash_rxq_init_n; ++i) {
- if (parser.queue[i].ibv_attr)
- rte_free(parser.queue[i].ibv_attr);
- }
- return -ret;
+ rte_errno = ENOTSUP;
+ return -rte_errno;
}
/**
* Update queue for specific filter.
*
- * @param priv
- * Private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param fdir_filter
* Filter to be updated.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-priv_fdir_filter_update(struct priv *priv,
+mlx5_fdir_filter_update(struct rte_eth_dev *dev,
const struct rte_eth_fdir_filter *fdir_filter)
{
int ret;
- ret = priv_fdir_filter_delete(priv, fdir_filter);
+ ret = mlx5_fdir_filter_delete(dev, fdir_filter);
if (ret)
return ret;
- ret = priv_fdir_filter_add(priv, fdir_filter);
- return ret;
+ return mlx5_fdir_filter_add(dev, fdir_filter);
}
/**
* Flush all filters.
*
- * @param priv
- * Private structure.
+ * @param dev
+ * Pointer to Ethernet device.
*/
static void
-priv_fdir_filter_flush(struct priv *priv)
+mlx5_fdir_filter_flush(struct rte_eth_dev *dev)
{
- priv_flow_flush(priv, &priv->flows);
+ struct priv *priv = dev->data->dev_private;
+
+ mlx5_flow_list_flush(dev, &priv->flows);
}
/**
* Get flow director information.
*
- * @param priv
- * Private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param[out] fdir_info
* Resulting flow director information.
*/
static void
-priv_fdir_info_get(struct priv *priv, struct rte_eth_fdir_info *fdir_info)
+mlx5_fdir_info_get(struct rte_eth_dev *dev, struct rte_eth_fdir_info *fdir_info)
{
struct rte_eth_fdir_masks *mask =
- &priv->dev->data->dev_conf.fdir_conf.mask;
+ &dev->data->dev_conf.fdir_conf.mask;
- fdir_info->mode = priv->dev->data->dev_conf.fdir_conf.mode;
+ fdir_info->mode = dev->data->dev_conf.fdir_conf.mode;
fdir_info->guarant_spc = 0;
rte_memcpy(&fdir_info->mask, mask, sizeof(fdir_info->mask));
fdir_info->max_flexpayload = 0;
/**
* Deal with flow director operations.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param filter_op
* Operation to perform.
* @param arg
* Pointer to operation-specific structure.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-priv_fdir_ctrl_func(struct priv *priv, enum rte_filter_op filter_op, void *arg)
+mlx5_fdir_ctrl_func(struct rte_eth_dev *dev, enum rte_filter_op filter_op,
+ void *arg)
{
enum rte_fdir_mode fdir_mode =
- priv->dev->data->dev_conf.fdir_conf.mode;
- int ret = 0;
+ dev->data->dev_conf.fdir_conf.mode;
if (filter_op == RTE_ETH_FILTER_NOP)
return 0;
if (fdir_mode != RTE_FDIR_MODE_PERFECT &&
fdir_mode != RTE_FDIR_MODE_PERFECT_MAC_VLAN) {
- ERROR("%p: flow director mode %d not supported",
- (void *)priv, fdir_mode);
- return EINVAL;
+ DRV_LOG(ERR, "port %u flow director mode %d not supported",
+ dev->data->port_id, fdir_mode);
+ rte_errno = EINVAL;
+ return -rte_errno;
}
switch (filter_op) {
case RTE_ETH_FILTER_ADD:
- ret = priv_fdir_filter_add(priv, arg);
- break;
+ return mlx5_fdir_filter_add(dev, arg);
case RTE_ETH_FILTER_UPDATE:
- ret = priv_fdir_filter_update(priv, arg);
- break;
+ return mlx5_fdir_filter_update(dev, arg);
case RTE_ETH_FILTER_DELETE:
- ret = priv_fdir_filter_delete(priv, arg);
- break;
+ return mlx5_fdir_filter_delete(dev, arg);
case RTE_ETH_FILTER_FLUSH:
- priv_fdir_filter_flush(priv);
+ mlx5_fdir_filter_flush(dev);
break;
case RTE_ETH_FILTER_INFO:
- priv_fdir_info_get(priv, arg);
+ mlx5_fdir_info_get(dev, arg);
break;
default:
- DEBUG("%p: unknown operation %u", (void *)priv,
- filter_op);
- ret = EINVAL;
- break;
+ DRV_LOG(DEBUG, "port %u unknown operation %u",
+ dev->data->port_id, filter_op);
+ rte_errno = EINVAL;
+ return -rte_errno;
}
- return ret;
+ return 0;
}
/**
* Pointer to operation-specific structure.
*
* @return
- * 0 on success, negative errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_dev_filter_ctrl(struct rte_eth_dev *dev,
enum rte_filter_op filter_op,
void *arg)
{
- int ret = EINVAL;
- struct priv *priv = dev->data->dev_private;
-
switch (filter_type) {
case RTE_ETH_FILTER_GENERIC:
- if (filter_op != RTE_ETH_FILTER_GET)
- return -EINVAL;
+ if (filter_op != RTE_ETH_FILTER_GET) {
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
*(const void **)arg = &mlx5_flow_ops;
return 0;
case RTE_ETH_FILTER_FDIR:
- ret = priv_fdir_ctrl_func(priv, filter_op, arg);
- break;
+ return mlx5_fdir_ctrl_func(dev, filter_op, arg);
default:
- ERROR("%p: filter type (%d) not supported",
- (void *)dev, filter_type);
- break;
+ DRV_LOG(ERR, "port %u filter type (%d) not supported",
+ dev->data->port_id, filter_type);
+ rte_errno = ENOTSUP;
+ return -rte_errno;
}
- return -ret;
+ return 0;
+}
+
+/**
+ * Init the driver ops structure.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+void
+mlx5_flow_init_driver_ops(struct rte_eth_dev *dev)
+{
+ struct priv *priv __rte_unused = dev->data->dev_private;
+
+#ifdef HAVE_IBV_FLOW_DV_SUPPORT
+ if (priv->config.dv_flow_en)
+ mlx5_flow_dv_get_driver_ops(&nic_ops);
+ else
+ mlx5_flow_verbs_get_driver_ops(&nic_ops);
+#else
+ mlx5_flow_verbs_get_driver_ops(&nic_ops);
+#endif
}