#include <rte_common.h>
#include <rte_ether.h>
-#include <rte_eth_ctrl.h>
#include <rte_ethdev_driver.h>
#include <rte_flow.h>
#include <rte_flow_driver.h>
#include "mlx5.h"
#include "mlx5_defs.h"
-#include "mlx5_prm.h"
-#include "mlx5_glue.h"
#include "mlx5_flow.h"
+#include "mlx5_glue.h"
+#include "mlx5_prm.h"
+#include "mlx5_rxtx.h"
/* Dev ops structure defined in mlx5.c */
extern const struct eth_dev_ops mlx5_dev_ops;
#ifdef HAVE_IBV_FLOW_DV_SUPPORT
extern const struct mlx5_flow_driver_ops mlx5_flow_dv_drv_ops;
#endif
-extern const struct mlx5_flow_driver_ops mlx5_flow_tcf_drv_ops;
extern const struct mlx5_flow_driver_ops mlx5_flow_verbs_drv_ops;
const struct mlx5_flow_driver_ops mlx5_flow_null_drv_ops;
#ifdef HAVE_IBV_FLOW_DV_SUPPORT
[MLX5_FLOW_TYPE_DV] = &mlx5_flow_dv_drv_ops,
#endif
- [MLX5_FLOW_TYPE_TCF] = &mlx5_flow_tcf_drv_ops,
[MLX5_FLOW_TYPE_VERBS] = &mlx5_flow_verbs_drv_ops,
[MLX5_FLOW_TYPE_MAX] = &mlx5_flow_null_drv_ops
};
.next = RTE_FLOW_EXPAND_RSS_NEXT
(MLX5_EXPANSION_OUTER_IPV4_UDP,
MLX5_EXPANSION_OUTER_IPV4_TCP,
- MLX5_EXPANSION_GRE),
+ MLX5_EXPANSION_GRE,
+ MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV6),
.type = RTE_FLOW_ITEM_TYPE_IPV4,
.rss_types = ETH_RSS_IPV4 | ETH_RSS_FRAG_IPV4 |
ETH_RSS_NONFRAG_IPV4_OTHER,
[MLX5_EXPANSION_OUTER_IPV6] = {
.next = RTE_FLOW_EXPAND_RSS_NEXT
(MLX5_EXPANSION_OUTER_IPV6_UDP,
- MLX5_EXPANSION_OUTER_IPV6_TCP),
+ MLX5_EXPANSION_OUTER_IPV6_TCP,
+ MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV6),
.type = RTE_FLOW_ITEM_TYPE_IPV6,
.rss_types = ETH_RSS_IPV6 | ETH_RSS_FRAG_IPV6 |
ETH_RSS_NONFRAG_IPV6_OTHER,
/* Convert FDIR request to Generic flow. */
struct mlx5_fdir {
struct rte_flow_attr attr;
- struct rte_flow_action actions[2];
struct rte_flow_item items[4];
struct rte_flow_item_eth l2;
struct rte_flow_item_eth l2_mask;
struct rte_flow_item_udp udp;
struct rte_flow_item_tcp tcp;
} l4_mask;
+ struct rte_flow_action actions[2];
struct rte_flow_action_queue queue;
};
/* Tunnel information. */
struct mlx5_flow_tunnel_info {
- uint32_t tunnel; /**< Tunnel bit (see MLX5_FLOW_*). */
+ uint64_t tunnel; /**< Tunnel bit (see MLX5_FLOW_*). */
uint32_t ptype; /**< Tunnel Ptype (see RTE_PTYPE_*). */
};
.tunnel = MLX5_FLOW_LAYER_VXLAN,
.ptype = RTE_PTYPE_TUNNEL_VXLAN | RTE_PTYPE_L4_UDP,
},
+ {
+ .tunnel = MLX5_FLOW_LAYER_GENEVE,
+ .ptype = RTE_PTYPE_TUNNEL_GENEVE | RTE_PTYPE_L4_UDP,
+ },
{
.tunnel = MLX5_FLOW_LAYER_VXLAN_GPE,
.ptype = RTE_PTYPE_TUNNEL_VXLAN_GPE | RTE_PTYPE_L4_UDP,
},
{
.tunnel = MLX5_FLOW_LAYER_MPLS | MLX5_FLOW_LAYER_OUTER_L4_UDP,
- .ptype = RTE_PTYPE_TUNNEL_MPLS_IN_GRE | RTE_PTYPE_L4_UDP,
+ .ptype = RTE_PTYPE_TUNNEL_MPLS_IN_UDP | RTE_PTYPE_L4_UDP,
},
{
.tunnel = MLX5_FLOW_LAYER_MPLS,
.ptype = RTE_PTYPE_TUNNEL_MPLS_IN_GRE,
},
+ {
+ .tunnel = MLX5_FLOW_LAYER_NVGRE,
+ .ptype = RTE_PTYPE_TUNNEL_NVGRE,
+ },
+ {
+ .tunnel = MLX5_FLOW_LAYER_IPIP,
+ .ptype = RTE_PTYPE_TUNNEL_IP,
+ },
+ {
+ .tunnel = MLX5_FLOW_LAYER_IPV6_ENCAP,
+ .ptype = RTE_PTYPE_TUNNEL_IP,
+ },
};
+/**
+ * Translate tag ID to register.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] feature
+ * The feature that request the register.
+ * @param[in] id
+ * The request register ID.
+ * @param[out] error
+ * Error description in case of any.
+ *
+ * @return
+ * The request register on success, a negative errno
+ * value otherwise and rte_errno is set.
+ */
+enum modify_reg
+mlx5_flow_get_reg_id(struct rte_eth_dev *dev,
+ enum mlx5_feature_name feature,
+ uint32_t id,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *config = &priv->config;
+ enum modify_reg start_reg;
+
+ switch (feature) {
+ case MLX5_HAIRPIN_RX:
+ return REG_B;
+ case MLX5_HAIRPIN_TX:
+ return REG_A;
+ case MLX5_METADATA_RX:
+ switch (config->dv_xmeta_en) {
+ case MLX5_XMETA_MODE_LEGACY:
+ return REG_B;
+ case MLX5_XMETA_MODE_META16:
+ return REG_C_0;
+ case MLX5_XMETA_MODE_META32:
+ return REG_C_1;
+ }
+ break;
+ case MLX5_METADATA_TX:
+ return REG_A;
+ case MLX5_METADATA_FDB:
+ return REG_C_0;
+ case MLX5_FLOW_MARK:
+ switch (config->dv_xmeta_en) {
+ case MLX5_XMETA_MODE_LEGACY:
+ return REG_NONE;
+ case MLX5_XMETA_MODE_META16:
+ return REG_C_1;
+ case MLX5_XMETA_MODE_META32:
+ return REG_C_0;
+ }
+ break;
+ case MLX5_COPY_MARK:
+ case MLX5_MTR_SFX:
+ /*
+ * Metadata COPY_MARK register using is in meter suffix sub
+ * flow while with meter. It's safe to share the same register.
+ */
+ return priv->mtr_color_reg != REG_C_2 ? REG_C_2 : REG_C_3;
+ case MLX5_MTR_COLOR:
+ RTE_ASSERT(priv->mtr_color_reg != REG_NONE);
+ return priv->mtr_color_reg;
+ case MLX5_APP_TAG:
+ /*
+ * If meter is enable, it will engage two registers for color
+ * match and flow match. If meter color match is not using the
+ * REG_C_2, need to skip the REG_C_x be used by meter color
+ * match.
+ * If meter is disable, free to use all available registers.
+ */
+ if (priv->mtr_color_reg != REG_NONE)
+ start_reg = priv->mtr_color_reg != REG_C_2 ? REG_C_3 :
+ REG_C_4;
+ else
+ start_reg = REG_C_2;
+ if (id > (REG_C_7 - start_reg))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL, "invalid tag id");
+ if (config->flow_mreg_c[id + start_reg - REG_C_0] == REG_NONE)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL, "unsupported tag id");
+ /*
+ * This case means meter is using the REG_C_x great than 2.
+ * Take care not to conflict with meter color REG_C_x.
+ * If the available index REG_C_y >= REG_C_x, skip the
+ * color register.
+ */
+ if (start_reg == REG_C_3 && config->flow_mreg_c
+ [id + REG_C_3 - REG_C_0] >= priv->mtr_color_reg) {
+ if (config->flow_mreg_c[id + 1 + REG_C_3 - REG_C_0] !=
+ REG_NONE)
+ return config->flow_mreg_c
+ [id + 1 + REG_C_3 - REG_C_0];
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL, "unsupported tag id");
+ }
+ return config->flow_mreg_c[id + start_reg - REG_C_0];
+ }
+ assert(false);
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "invalid feature name");
+}
+
+/**
+ * Check extensive flow metadata register support.
+ *
+ * @param dev
+ * Pointer to rte_eth_dev structure.
+ *
+ * @return
+ * True if device supports extensive flow metadata register, otherwise false.
+ */
+bool
+mlx5_flow_ext_mreg_supported(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *config = &priv->config;
+
+ /*
+ * Having available reg_c can be regarded inclusively as supporting
+ * extensive flow metadata register, which could mean,
+ * - metadata register copy action by modify header.
+ * - 16 modify header actions is supported.
+ * - reg_c's are preserved across different domain (FDB and NIC) on
+ * packet loopback by flow lookup miss.
+ */
+ return config->flow_mreg_c[2] != REG_NONE;
+}
+
/**
* Discover the maximum number of priority available.
*
int
mlx5_flow_discover_priorities(struct rte_eth_dev *dev)
{
+ struct mlx5_priv *priv = dev->data->dev_private;
struct {
struct ibv_flow_attr attr;
struct ibv_flow_spec_eth eth;
} flow_attr = {
.attr = {
.num_of_specs = 2,
+ .port = (uint8_t)priv->ibv_port,
},
.eth = {
.type = IBV_FLOW_SPEC_ETH,
claim_zero(mlx5_glue->destroy_flow(flow));
priority = vprio[i];
}
+ mlx5_hrxq_drop_release(dev);
switch (priority) {
case 8:
priority = RTE_DIM(priority_map_3);
rte_errno = ENOTSUP;
DRV_LOG(ERR,
"port %u verbs maximum priority: %d expected 8/16",
- dev->data->port_id, vprio[i]);
+ dev->data->port_id, priority);
return -rte_errno;
}
- mlx5_hrxq_drop_release(dev);
DRV_LOG(INFO, "port %u flow maximum priority: %d",
dev->data->port_id, priority);
return priority;
uint32_t subpriority)
{
uint32_t res = 0;
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
switch (priv->config.flow_prio) {
case RTE_DIM(priority_map_3):
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
+int
mlx5_flow_item_acceptable(const struct rte_flow_item *item,
const uint8_t *mask,
const uint8_t *nic_mask,
* Item hash fields.
*
* @return
- * The hash fileds that should be used.
+ * The hash fields that should be used.
*/
uint64_t
mlx5_flow_hashfields_adjust(struct mlx5_flow *dev_flow,
- int tunnel __rte_unused, uint32_t layer_types,
+ int tunnel __rte_unused, uint64_t layer_types,
uint64_t hash_fields)
{
struct rte_flow *flow = dev_flow->flow;
* Rx queue to update.
*/
static void
-mlx5_flow_rxq_tunnel_ptype_update(struct mlx5_rxq_ctrl *rxq_ctrl)
+flow_rxq_tunnel_ptype_update(struct mlx5_rxq_ctrl *rxq_ctrl)
{
unsigned int i;
uint32_t tunnel_ptype = 0;
}
/**
- * Set the Rx queue flags (Mark/Flag and Tunnel Ptypes) according to the flow.
+ * Set the Rx queue flags (Mark/Flag and Tunnel Ptypes) according to the devive
+ * flow.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
- * @param[in] flow
- * Pointer to flow structure.
+ * @param[in] dev_flow
+ * Pointer to device flow structure.
*/
static void
-mlx5_flow_rxq_flags_set(struct rte_eth_dev *dev, struct rte_flow *flow)
+flow_drv_rxq_flags_set(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow)
{
- struct priv *priv = dev->data->dev_private;
- const int mark = !!(flow->actions &
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct rte_flow *flow = dev_flow->flow;
+ const int mark = !!(dev_flow->actions &
(MLX5_FLOW_ACTION_FLAG | MLX5_FLOW_ACTION_MARK));
- const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+ const int tunnel = !!(dev_flow->layers & MLX5_FLOW_LAYER_TUNNEL);
unsigned int i;
for (i = 0; i != flow->rss.queue_num; ++i) {
- int idx = (*flow->queue)[i];
+ int idx = (*flow->rss.queue)[i];
struct mlx5_rxq_ctrl *rxq_ctrl =
container_of((*priv->rxqs)[idx],
struct mlx5_rxq_ctrl, rxq);
- if (mark) {
+ /*
+ * To support metadata register copy on Tx loopback,
+ * this must be always enabled (metadata may arive
+ * from other port - not from local flows only.
+ */
+ if (priv->config.dv_flow_en &&
+ priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
+ mlx5_flow_ext_mreg_supported(dev)) {
+ rxq_ctrl->rxq.mark = 1;
+ rxq_ctrl->flow_mark_n = 1;
+ } else if (mark) {
rxq_ctrl->rxq.mark = 1;
rxq_ctrl->flow_mark_n++;
}
/* Increase the counter matching the flow. */
for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
- if ((tunnels_info[j].tunnel & flow->layers) ==
+ if ((tunnels_info[j].tunnel &
+ dev_flow->layers) ==
tunnels_info[j].tunnel) {
rxq_ctrl->flow_tunnels_n[j]++;
break;
}
}
- mlx5_flow_rxq_tunnel_ptype_update(rxq_ctrl);
+ flow_rxq_tunnel_ptype_update(rxq_ctrl);
}
}
}
+/**
+ * Set the Rx queue flags (Mark/Flag and Tunnel Ptypes) for a flow
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] flow
+ * Pointer to flow structure.
+ */
+static void
+flow_rxq_flags_set(struct rte_eth_dev *dev, struct rte_flow *flow)
+{
+ struct mlx5_flow *dev_flow;
+
+ LIST_FOREACH(dev_flow, &flow->dev_flows, next)
+ flow_drv_rxq_flags_set(dev, dev_flow);
+}
+
/**
* Clear the Rx queue flags (Mark/Flag and Tunnel Ptype) associated with the
- * @p flow if no other flow uses it with the same kind of request.
+ * device flow if no other flow uses it with the same kind of request.
*
* @param dev
* Pointer to Ethernet device.
- * @param[in] flow
- * Pointer to the flow.
+ * @param[in] dev_flow
+ * Pointer to the device flow.
*/
static void
-mlx5_flow_rxq_flags_trim(struct rte_eth_dev *dev, struct rte_flow *flow)
+flow_drv_rxq_flags_trim(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow)
{
- struct priv *priv = dev->data->dev_private;
- const int mark = !!(flow->actions &
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct rte_flow *flow = dev_flow->flow;
+ const int mark = !!(dev_flow->actions &
(MLX5_FLOW_ACTION_FLAG | MLX5_FLOW_ACTION_MARK));
- const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+ const int tunnel = !!(dev_flow->layers & MLX5_FLOW_LAYER_TUNNEL);
unsigned int i;
assert(dev->data->dev_started);
for (i = 0; i != flow->rss.queue_num; ++i) {
- int idx = (*flow->queue)[i];
+ int idx = (*flow->rss.queue)[i];
struct mlx5_rxq_ctrl *rxq_ctrl =
container_of((*priv->rxqs)[idx],
struct mlx5_rxq_ctrl, rxq);
- if (mark) {
+ if (priv->config.dv_flow_en &&
+ priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
+ mlx5_flow_ext_mreg_supported(dev)) {
+ rxq_ctrl->rxq.mark = 1;
+ rxq_ctrl->flow_mark_n = 1;
+ } else if (mark) {
rxq_ctrl->flow_mark_n--;
rxq_ctrl->rxq.mark = !!rxq_ctrl->flow_mark_n;
}
/* Decrease the counter matching the flow. */
for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
- if ((tunnels_info[j].tunnel & flow->layers) ==
+ if ((tunnels_info[j].tunnel &
+ dev_flow->layers) ==
tunnels_info[j].tunnel) {
rxq_ctrl->flow_tunnels_n[j]--;
break;
}
}
- mlx5_flow_rxq_tunnel_ptype_update(rxq_ctrl);
+ flow_rxq_tunnel_ptype_update(rxq_ctrl);
}
}
}
+/**
+ * Clear the Rx queue flags (Mark/Flag and Tunnel Ptype) associated with the
+ * @p flow if no other flow uses it with the same kind of request.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Pointer to the flow.
+ */
+static void
+flow_rxq_flags_trim(struct rte_eth_dev *dev, struct rte_flow *flow)
+{
+ struct mlx5_flow *dev_flow;
+
+ LIST_FOREACH(dev_flow, &flow->dev_flows, next)
+ flow_drv_rxq_flags_trim(dev, dev_flow);
+}
+
/**
* Clear the Mark/Flag and Tunnel ptype information in all Rx queues.
*
* Pointer to Ethernet device.
*/
static void
-mlx5_flow_rxq_flags_clear(struct rte_eth_dev *dev)
+flow_rxq_flags_clear(struct rte_eth_dev *dev)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
unsigned int i;
for (i = 0; i != priv->rxqs_n; ++i) {
}
}
+/*
+ * return a pointer to the desired action in the list of actions.
+ *
+ * @param[in] actions
+ * The list of actions to search the action in.
+ * @param[in] action
+ * The action to find.
+ *
+ * @return
+ * Pointer to the action in the list, if found. NULL otherwise.
+ */
+const struct rte_flow_action *
+mlx5_flow_find_action(const struct rte_flow_action *actions,
+ enum rte_flow_action_type action)
+{
+ if (actions == NULL)
+ return NULL;
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++)
+ if (actions->type == action)
+ return actions;
+ return NULL;
+}
+
/*
* Validate the flag action.
*
* Pointer to error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_flow_validate_action_drop(uint64_t action_flags,
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't drop and mark in same flow");
- if (action_flags & MLX5_FLOW_FATE_ACTIONS)
+ if (action_flags & (MLX5_FLOW_FATE_ACTIONS |
+ MLX5_FLOW_FATE_ESWITCH_ACTIONS))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't have 2 fate actions in"
* Pointer to error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_flow_validate_action_queue(const struct rte_flow_action *action,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
const struct rte_flow_action_queue *queue = action->conf;
if (action_flags & MLX5_FLOW_FATE_ACTIONS)
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't have 2 fate actions in"
" same flow");
+ if (!priv->rxqs_n)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ NULL, "No Rx queues configured");
if (queue->index >= priv->rxqs_n)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
* Pointer to the Ethernet device structure.
* @param[in] attr
* Attributes of flow that includes this action.
+ * @param[in] item_flags
+ * Items that were detected.
* @param[out] error
* Pointer to error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_flow_validate_action_rss(const struct rte_flow_action *action,
uint64_t action_flags,
struct rte_eth_dev *dev,
const struct rte_flow_attr *attr,
+ uint64_t item_flags,
struct rte_flow_error *error)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
const struct rte_flow_action_rss *rss = action->conf;
+ int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
unsigned int i;
if (action_flags & MLX5_FLOW_FATE_ACTIONS)
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
&rss->level,
"tunnel RSS is not supported");
- if (rss->key_len < MLX5_RSS_HASH_KEY_LEN)
+ /* allow RSS key_len 0 in case of NULL (default) RSS key. */
+ if (rss->key_len == 0 && rss->key != NULL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key length 0");
+ if (rss->key_len > 0 && rss->key_len < MLX5_RSS_HASH_KEY_LEN)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
&rss->key_len,
&rss->types,
"some RSS protocols are not"
" supported");
+ if (!priv->rxqs_n)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ NULL, "No Rx queues configured");
+ if (!rss->queue_num)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ NULL, "No queues configured");
for (i = 0; i != rss->queue_num; ++i) {
if (!(*priv->rxqs)[rss->queue[i]])
return rte_flow_error_set
RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
"rss action not supported for "
"egress");
+ if (rss->level > 1 && !tunnel)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF, NULL,
+ "inner RSS is not supported for "
+ "non-tunnel flows");
return 0;
}
* Pointer to error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-mlx5_flow_validate_action_count(struct rte_eth_dev *dev,
+mlx5_flow_validate_action_count(struct rte_eth_dev *dev __rte_unused,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
- struct priv *priv = dev->data->dev_private;
-
- if (!priv->config.flow_counter_en)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION, NULL,
- "flow counters are not supported.");
if (attr->egress)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
const struct rte_flow_attr *attributes,
struct rte_flow_error *error)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
uint32_t priority_max = priv->config.flow_prio - 1;
if (attributes->group)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
"egress is not supported");
- if (attributes->transfer)
+ if (attributes->transfer && !priv->config.dv_esw_en)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
NULL, "transfer is not supported");
return 0;
}
+/**
+ * Validate ICMP6 item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_icmp6(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_icmp6 *mask = item->mask;
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV6;
+ const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4;
+ int ret;
+
+ if (target_protocol != 0xFF && target_protocol != IPPROTO_ICMPV6)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with ICMP6 layer");
+ if (!(item_flags & l3m))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "IPv6 is mandatory to filter on"
+ " ICMP6");
+ if (item_flags & l4m)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple L4 layers not supported");
+ if (!mask)
+ mask = &rte_flow_item_icmp6_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_icmp6_mask,
+ sizeof(struct rte_flow_item_icmp6), error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Validate ICMP item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_icmp(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_icmp *mask = item->mask;
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV4 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV4;
+ const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4;
+ int ret;
+
+ if (target_protocol != 0xFF && target_protocol != IPPROTO_ICMP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with ICMP layer");
+ if (!(item_flags & l3m))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "IPv4 is mandatory to filter"
+ " on ICMP");
+ if (item_flags & l4m)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple L4 layers not supported");
+ if (!mask)
+ mask = &rte_flow_item_icmp_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_icmp_mask,
+ sizeof(struct rte_flow_item_icmp), error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
/**
* Validate Ethernet item.
*
};
int ret;
int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t ethm = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
+ MLX5_FLOW_LAYER_OUTER_L2;
- if (item_flags & MLX5_FLOW_LAYER_OUTER_L2)
+ if (item_flags & ethm)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "3 levels of l2 are not supported");
- if ((item_flags & MLX5_FLOW_LAYER_INNER_L2) && !tunnel)
- return rte_flow_error_set(error, ENOTSUP,
+ "multiple L2 layers not supported");
+ if ((!tunnel && (item_flags & MLX5_FLOW_LAYER_OUTER_L3)) ||
+ (tunnel && (item_flags & MLX5_FLOW_LAYER_INNER_L3)))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L2 layer should not follow "
+ "L3 layers");
+ if ((!tunnel && (item_flags & MLX5_FLOW_LAYER_OUTER_VLAN)) ||
+ (tunnel && (item_flags & MLX5_FLOW_LAYER_INNER_VLAN)))
+ return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "2 L2 without tunnel are not supported");
+ "L2 layer should not follow VLAN");
if (!mask)
mask = &rte_flow_item_eth_mask;
ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
* Item specification.
* @param[in] item_flags
* Bit-fields that holds the items detected until now.
+ * @param[in] dev
+ * Ethernet device flow is being created on.
* @param[out] error
* Pointer to error structure.
*
*/
int
mlx5_flow_validate_item_vlan(const struct rte_flow_item *item,
- int64_t item_flags,
+ uint64_t item_flags,
+ struct rte_eth_dev *dev,
struct rte_flow_error *error)
{
const struct rte_flow_item_vlan *spec = item->spec;
const struct rte_flow_item_vlan *mask = item->mask;
const struct rte_flow_item_vlan nic_mask = {
- .tci = RTE_BE16(0x0fff),
- .inner_type = RTE_BE16(0xffff),
+ .tci = RTE_BE16(UINT16_MAX),
+ .inner_type = RTE_BE16(UINT16_MAX),
};
uint16_t vlan_tag = 0;
const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
int ret;
- const uint32_t l34m = tunnel ? (MLX5_FLOW_LAYER_INNER_L3 |
+ const uint64_t l34m = tunnel ? (MLX5_FLOW_LAYER_INNER_L3 |
MLX5_FLOW_LAYER_INNER_L4) :
(MLX5_FLOW_LAYER_OUTER_L3 |
MLX5_FLOW_LAYER_OUTER_L4);
- const uint32_t vlanm = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
+ const uint64_t vlanm = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
MLX5_FLOW_LAYER_OUTER_VLAN;
if (item_flags & vlanm)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "VLAN layer already configured");
+ "multiple VLAN layers not supported");
else if ((item_flags & l34m) != 0)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "L2 layer cannot follow L3/L4 layer");
+ "VLAN cannot follow L3/L4 layer");
if (!mask)
mask = &rte_flow_item_vlan_mask;
ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
error);
if (ret)
return ret;
+ if (!tunnel && mask->tci != RTE_BE16(0x0fff)) {
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ if (priv->vmwa_context) {
+ /*
+ * Non-NULL context means we have a virtual machine
+ * and SR-IOV enabled, we have to create VLAN interface
+ * to make hypervisor to setup E-Switch vport
+ * context correctly. We avoid creating the multiple
+ * VLAN interfaces, so we cannot support VLAN tag mask.
+ */
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "VLAN tag mask is not"
+ " supported in virtual"
+ " environment");
+ }
+ }
if (spec) {
vlan_tag = spec->tci;
vlan_tag &= mask->tci;
* Item specification.
* @param[in] item_flags
* Bit-fields that holds the items detected until now.
+ * @param[in] acc_mask
+ * Acceptable mask, if NULL default internal default mask
+ * will be used to check whether item fields are supported.
* @param[out] error
* Pointer to error structure.
*
*/
int
mlx5_flow_validate_item_ipv4(const struct rte_flow_item *item,
- int64_t item_flags,
+ uint64_t item_flags,
+ uint64_t last_item,
+ uint16_t ether_type,
+ const struct rte_flow_item_ipv4 *acc_mask,
struct rte_flow_error *error)
{
const struct rte_flow_item_ipv4 *mask = item->mask;
+ const struct rte_flow_item_ipv4 *spec = item->spec;
const struct rte_flow_item_ipv4 nic_mask = {
.hdr = {
.src_addr = RTE_BE32(0xffffffff),
},
};
const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3;
+ const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4;
int ret;
+ uint8_t next_proto = 0xFF;
+ const uint64_t l2_vlan = (MLX5_FLOW_LAYER_L2 |
+ MLX5_FLOW_LAYER_OUTER_VLAN |
+ MLX5_FLOW_LAYER_INNER_VLAN);
- if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
- MLX5_FLOW_LAYER_OUTER_L3))
+ if ((last_item & l2_vlan) && ether_type &&
+ ether_type != RTE_ETHER_TYPE_IPV4)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "IPv4 cannot follow L2/VLAN layer "
+ "which ether type is not IPv4");
+ if (item_flags & MLX5_FLOW_LAYER_IPIP) {
+ if (mask && spec)
+ next_proto = mask->hdr.next_proto_id &
+ spec->hdr.next_proto_id;
+ if (next_proto == IPPROTO_IPIP || next_proto == IPPROTO_IPV6)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "multiple tunnel "
+ "not supported");
+ }
+ if (item_flags & MLX5_FLOW_LAYER_IPV6_ENCAP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "wrong tunnel type - IPv6 specified "
+ "but IPv4 item provided");
+ if (item_flags & l3m)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"multiple L3 layers not supported");
- else if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
- MLX5_FLOW_LAYER_OUTER_L4))
+ else if (item_flags & l4m)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"L3 cannot follow an L4 layer.");
+ else if ((item_flags & MLX5_FLOW_LAYER_NVGRE) &&
+ !(item_flags & MLX5_FLOW_LAYER_INNER_L2))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 cannot follow an NVGRE layer.");
if (!mask)
mask = &rte_flow_item_ipv4_mask;
+ else if (mask->hdr.next_proto_id != 0 &&
+ mask->hdr.next_proto_id != 0xff)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
+ "partial mask is not supported"
+ " for protocol");
ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
- (const uint8_t *)&nic_mask,
+ acc_mask ? (const uint8_t *)acc_mask
+ : (const uint8_t *)&nic_mask,
sizeof(struct rte_flow_item_ipv4),
error);
if (ret < 0)
* Item specification.
* @param[in] item_flags
* Bit-fields that holds the items detected until now.
+ * @param[in] acc_mask
+ * Acceptable mask, if NULL default internal default mask
+ * will be used to check whether item fields are supported.
* @param[out] error
* Pointer to error structure.
*
int
mlx5_flow_validate_item_ipv6(const struct rte_flow_item *item,
uint64_t item_flags,
+ uint64_t last_item,
+ uint16_t ether_type,
+ const struct rte_flow_item_ipv6 *acc_mask,
struct rte_flow_error *error)
{
const struct rte_flow_item_ipv6 *mask = item->mask;
+ const struct rte_flow_item_ipv6 *spec = item->spec;
const struct rte_flow_item_ipv6 nic_mask = {
.hdr = {
.src_addr =
},
};
const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3;
+ const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4;
int ret;
+ uint8_t next_proto = 0xFF;
+ const uint64_t l2_vlan = (MLX5_FLOW_LAYER_L2 |
+ MLX5_FLOW_LAYER_OUTER_VLAN |
+ MLX5_FLOW_LAYER_INNER_VLAN);
- if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
- MLX5_FLOW_LAYER_OUTER_L3))
+ if ((last_item & l2_vlan) && ether_type &&
+ ether_type != RTE_ETHER_TYPE_IPV6)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "IPv6 cannot follow L2/VLAN layer "
+ "which ether type is not IPv6");
+ if (item_flags & MLX5_FLOW_LAYER_IPV6_ENCAP) {
+ if (mask && spec)
+ next_proto = mask->hdr.proto & spec->hdr.proto;
+ if (next_proto == IPPROTO_IPIP || next_proto == IPPROTO_IPV6)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "multiple tunnel "
+ "not supported");
+ }
+ if (item_flags & MLX5_FLOW_LAYER_IPIP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "wrong tunnel type - IPv4 specified "
+ "but IPv6 item provided");
+ if (item_flags & l3m)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"multiple L3 layers not supported");
- else if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
- MLX5_FLOW_LAYER_OUTER_L4))
+ else if (item_flags & l4m)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"L3 cannot follow an L4 layer.");
- /*
- * IPv6 is not recognised by the NIC inside a GRE tunnel.
- * Such support has to be disabled as the rule will be
- * accepted. Issue reproduced with Mellanox OFED 4.3-3.0.2.1 and
- * Mellanox OFED 4.4-1.0.0.0.
- */
- if (tunnel && item_flags & MLX5_FLOW_LAYER_GRE)
- return rte_flow_error_set(error, ENOTSUP,
+ else if ((item_flags & MLX5_FLOW_LAYER_NVGRE) &&
+ !(item_flags & MLX5_FLOW_LAYER_INNER_L2))
+ return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "IPv6 inside a GRE tunnel is"
- " not recognised.");
+ "L3 cannot follow an NVGRE layer.");
if (!mask)
mask = &rte_flow_item_ipv6_mask;
ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
- (const uint8_t *)&nic_mask,
+ acc_mask ? (const uint8_t *)acc_mask
+ : (const uint8_t *)&nic_mask,
sizeof(struct rte_flow_item_ipv6),
error);
if (ret < 0)
* @param[in] target_protocol
* The next protocol in the previous item.
* @param[in] flow_mask
- * mlx5 flow-specific (TCF, DV, verbs, etc.) supported header fields mask.
+ * mlx5 flow-specific (DV, verbs, etc.) supported header fields mask.
* @param[out] error
* Pointer to error structure.
*
{
const struct rte_flow_item_udp *mask = item->mask;
const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3;
+ const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4;
int ret;
if (target_protocol != 0xff && target_protocol != IPPROTO_UDP)
RTE_FLOW_ERROR_TYPE_ITEM, item,
"protocol filtering not compatible"
" with UDP layer");
- if (!(item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
- MLX5_FLOW_LAYER_OUTER_L3)))
+ if (!(item_flags & l3m))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"L3 is mandatory to filter on L4");
- if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
- MLX5_FLOW_LAYER_OUTER_L4))
+ if (item_flags & l4m)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "L4 layer is already present");
+ "multiple L4 layers not supported");
if (!mask)
mask = &rte_flow_item_udp_mask;
ret = mlx5_flow_item_acceptable
{
const struct rte_flow_item_tcp *mask = item->mask;
const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3;
+ const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4;
int ret;
assert(flow_mask);
RTE_FLOW_ERROR_TYPE_ITEM, item,
"protocol filtering not compatible"
" with TCP layer");
- if (!(item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
- MLX5_FLOW_LAYER_OUTER_L3)))
+ if (!(item_flags & l3m))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"L3 is mandatory to filter on L4");
- if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
- MLX5_FLOW_LAYER_OUTER_L4))
+ if (item_flags & l4m)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "L4 layer is already present");
+ "multiple L4 layers not supported");
if (!mask)
mask = &rte_flow_item_tcp_mask;
ret = mlx5_flow_item_acceptable
if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "a tunnel is already present");
+ "multiple tunnel layers not"
+ " supported");
/*
* Verify only UDPv4 is present as defined in
* https://tools.ietf.org/html/rfc7348
struct rte_eth_dev *dev,
struct rte_flow_error *error)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
const struct rte_flow_item_vxlan_gpe *spec = item->spec;
const struct rte_flow_item_vxlan_gpe *mask = item->mask;
int ret;
if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "a tunnel is already present");
+ "multiple tunnel layers not"
+ " supported");
/*
* Verify only UDPv4 is present as defined in
* https://tools.ietf.org/html/rfc7348
" defined");
return 0;
}
-
/**
- * Validate GRE item.
+ * Validate GRE Key item.
*
* @param[in] item
* Item specification.
* @param[in] item_flags
* Bit flags to mark detected items.
- * @param[in] target_protocol
- * The next protocol in the previous item.
+ * @param[in] gre_item
+ * Pointer to gre_item
* @param[out] error
* Pointer to error structure.
*
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-mlx5_flow_validate_item_gre(const struct rte_flow_item *item,
- uint64_t item_flags,
- uint8_t target_protocol,
- struct rte_flow_error *error)
+mlx5_flow_validate_item_gre_key(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ const struct rte_flow_item *gre_item,
+ struct rte_flow_error *error)
{
- const struct rte_flow_item_gre *spec __rte_unused = item->spec;
- const struct rte_flow_item_gre *mask = item->mask;
- int ret;
+ const rte_be32_t *mask = item->mask;
+ int ret = 0;
+ rte_be32_t gre_key_default_mask = RTE_BE32(UINT32_MAX);
+ const struct rte_flow_item_gre *gre_spec = gre_item->spec;
+ const struct rte_flow_item_gre *gre_mask = gre_item->mask;
- if (target_protocol != 0xff && target_protocol != IPPROTO_GRE)
- return rte_flow_error_set(error, EINVAL,
+ if (item_flags & MLX5_FLOW_LAYER_GRE_KEY)
+ return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "protocol filtering not compatible"
- " with this GRE layer");
- if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ "Multiple GRE key not support");
+ if (!(item_flags & MLX5_FLOW_LAYER_GRE))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "a tunnel is already present");
- if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
+ "No preceding GRE header");
+ if (item_flags & MLX5_FLOW_LAYER_INNER)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "L3 Layer is missing");
+ "GRE key following a wrong item");
+ if (!gre_mask)
+ gre_mask = &rte_flow_item_gre_mask;
+ if (gre_spec && (gre_mask->c_rsvd0_ver & RTE_BE16(0x2000)) &&
+ !(gre_spec->c_rsvd0_ver & RTE_BE16(0x2000)))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "Key bit must be on");
+
+ if (!mask)
+ mask = &gre_key_default_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&gre_key_default_mask,
+ sizeof(rte_be32_t), error);
+ return ret;
+}
+
+/**
+ * Validate GRE item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit flags to mark detected items.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_gre(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_gre *spec __rte_unused = item->spec;
+ const struct rte_flow_item_gre *mask = item->mask;
+ int ret;
+ const struct rte_flow_item_gre nic_mask = {
+ .c_rsvd0_ver = RTE_BE16(0xB000),
+ .protocol = RTE_BE16(UINT16_MAX),
+ };
+
+ if (target_protocol != 0xff && target_protocol != IPPROTO_GRE)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with this GRE layer");
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple tunnel layers not"
+ " supported");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 Layer is missing");
if (!mask)
mask = &rte_flow_item_gre_mask;
ret = mlx5_flow_item_acceptable
(item, (const uint8_t *)mask,
- (const uint8_t *)&rte_flow_item_gre_mask,
+ (const uint8_t *)&nic_mask,
sizeof(struct rte_flow_item_gre), error);
if (ret < 0)
return ret;
+#ifndef HAVE_MLX5DV_DR
#ifndef HAVE_IBV_DEVICE_MPLS_SUPPORT
if (spec && (spec->protocol & mask->protocol))
return rte_flow_error_set(error, ENOTSUP,
" specification cannot be used for"
" filtering");
#endif
+#endif
+ return 0;
+}
+
+/**
+ * Validate Geneve item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] itemFlags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] enPriv
+ * Pointer to the private data structure.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+
+int
+mlx5_flow_validate_item_geneve(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ const struct rte_flow_item_geneve *spec = item->spec;
+ const struct rte_flow_item_geneve *mask = item->mask;
+ int ret;
+ uint16_t gbhdr;
+ uint8_t opt_len = priv->config.hca_attr.geneve_max_opt_len ?
+ MLX5_GENEVE_OPT_LEN_1 : MLX5_GENEVE_OPT_LEN_0;
+ const struct rte_flow_item_geneve nic_mask = {
+ .ver_opt_len_o_c_rsvd0 = RTE_BE16(0x3f80),
+ .vni = "\xff\xff\xff",
+ .protocol = RTE_BE16(UINT16_MAX),
+ };
+
+ if (!(priv->config.hca_attr.flex_parser_protocols &
+ MLX5_HCA_FLEX_GENEVE_ENABLED) ||
+ !priv->config.hca_attr.tunnel_stateless_geneve_rx)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 Geneve is not enabled by device"
+ " parameter and/or not configured in"
+ " firmware");
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple tunnel layers not"
+ " supported");
+ /*
+ * Verify only UDPv4 is present as defined in
+ * https://tools.ietf.org/html/rfc7348
+ */
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "no outer UDP layer found");
+ if (!mask)
+ mask = &rte_flow_item_geneve_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_geneve), error);
+ if (ret)
+ return ret;
+ if (spec) {
+ gbhdr = rte_be_to_cpu_16(spec->ver_opt_len_o_c_rsvd0);
+ if (MLX5_GENEVE_VER_VAL(gbhdr) ||
+ MLX5_GENEVE_CRITO_VAL(gbhdr) ||
+ MLX5_GENEVE_RSVD_VAL(gbhdr) || spec->rsvd1)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "Geneve protocol unsupported"
+ " fields are being used");
+ if (MLX5_GENEVE_OPTLEN_VAL(gbhdr) > opt_len)
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "Unsupported Geneve options length");
+ }
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "Geneve tunnel must be fully defined");
return 0;
}
/**
* Validate MPLS item.
*
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
* @param[in] item
* Item specification.
* @param[in] item_flags
* Bit-fields that holds the items detected until now.
- * @param[in] target_protocol
- * The next protocol in the previous item.
+ * @param[in] prev_layer
+ * The protocol layer indicated in previous item.
* @param[out] error
* Pointer to error structure.
*
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-mlx5_flow_validate_item_mpls(const struct rte_flow_item *item __rte_unused,
+mlx5_flow_validate_item_mpls(struct rte_eth_dev *dev __rte_unused,
+ const struct rte_flow_item *item __rte_unused,
uint64_t item_flags __rte_unused,
- uint8_t target_protocol __rte_unused,
+ uint64_t prev_layer __rte_unused,
struct rte_flow_error *error)
{
#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
const struct rte_flow_item_mpls *mask = item->mask;
+ struct mlx5_priv *priv = dev->data->dev_private;
int ret;
- if (target_protocol != 0xff && target_protocol != IPPROTO_MPLS)
+ if (!priv->config.mpls_en)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "MPLS not supported or"
+ " disabled in firmware"
+ " configuration.");
+ /* MPLS over IP, UDP, GRE is allowed */
+ if (!(prev_layer & (MLX5_FLOW_LAYER_OUTER_L3 |
+ MLX5_FLOW_LAYER_OUTER_L4_UDP |
+ MLX5_FLOW_LAYER_GRE)))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"protocol filtering not compatible"
" with MPLS layer");
- if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ /* Multi-tunnel isn't allowed but MPLS over GRE is an exception. */
+ if ((item_flags & MLX5_FLOW_LAYER_TUNNEL) &&
+ !(item_flags & MLX5_FLOW_LAYER_GRE))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "a tunnel is already"
- " present");
+ "multiple tunnel layers not"
+ " supported");
if (!mask)
mask = &rte_flow_item_mpls_mask;
ret = mlx5_flow_item_acceptable
" update.");
}
+/**
+ * Validate NVGRE item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit flags to mark detected items.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_nvgre(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_nvgre *mask = item->mask;
+ int ret;
+
+ if (target_protocol != 0xff && target_protocol != IPPROTO_GRE)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with this GRE layer");
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple tunnel layers not"
+ " supported");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 Layer is missing");
+ if (!mask)
+ mask = &rte_flow_item_nvgre_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_nvgre_mask,
+ sizeof(struct rte_flow_item_nvgre), error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/* Allocate unique ID for the split Q/RSS subflows. */
+static uint32_t
+flow_qrss_get_id(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ uint32_t qrss_id, ret;
+
+ ret = mlx5_flow_id_get(priv->qrss_id_pool, &qrss_id);
+ if (ret)
+ return 0;
+ assert(qrss_id);
+ return qrss_id;
+}
+
+/* Free unique ID for the split Q/RSS subflows. */
+static void
+flow_qrss_free_id(struct rte_eth_dev *dev, uint32_t qrss_id)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ if (qrss_id)
+ mlx5_flow_id_release(priv->qrss_id_pool, qrss_id);
+}
+
+/**
+ * Release resource related QUEUE/RSS action split.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param flow
+ * Flow to release id's from.
+ */
+static void
+flow_mreg_split_qrss_release(struct rte_eth_dev *dev,
+ struct rte_flow *flow)
+{
+ struct mlx5_flow *dev_flow;
+
+ LIST_FOREACH(dev_flow, &flow->dev_flows, next)
+ if (dev_flow->qrss_id)
+ flow_qrss_free_id(dev, dev_flow->qrss_id);
+}
+
static int
flow_null_validate(struct rte_eth_dev *dev __rte_unused,
const struct rte_flow_attr *attr __rte_unused,
const struct rte_flow_item items[] __rte_unused,
const struct rte_flow_action actions[] __rte_unused,
- struct rte_flow_error *error __rte_unused)
+ bool external __rte_unused,
+ struct rte_flow_error *error)
{
- rte_errno = ENOTSUP;
- return -rte_errno;
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
}
static struct mlx5_flow *
flow_null_prepare(const struct rte_flow_attr *attr __rte_unused,
const struct rte_flow_item items[] __rte_unused,
const struct rte_flow_action actions[] __rte_unused,
- uint64_t *item_flags __rte_unused,
- uint64_t *action_flags __rte_unused,
- struct rte_flow_error *error __rte_unused)
+ struct rte_flow_error *error)
{
- rte_errno = ENOTSUP;
+ rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
return NULL;
}
const struct rte_flow_attr *attr __rte_unused,
const struct rte_flow_item items[] __rte_unused,
const struct rte_flow_action actions[] __rte_unused,
- struct rte_flow_error *error __rte_unused)
+ struct rte_flow_error *error)
{
- rte_errno = ENOTSUP;
- return -rte_errno;
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
}
static int
flow_null_apply(struct rte_eth_dev *dev __rte_unused,
struct rte_flow *flow __rte_unused,
- struct rte_flow_error *error __rte_unused)
+ struct rte_flow_error *error)
{
- rte_errno = ENOTSUP;
- return -rte_errno;
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
}
static void
{
}
+static int
+flow_null_query(struct rte_eth_dev *dev __rte_unused,
+ struct rte_flow *flow __rte_unused,
+ const struct rte_flow_action *actions __rte_unused,
+ void *data __rte_unused,
+ struct rte_flow_error *error)
+{
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL, NULL);
+}
+
/* Void driver to protect from null pointer reference. */
const struct mlx5_flow_driver_ops mlx5_flow_null_drv_ops = {
.validate = flow_null_validate,
.apply = flow_null_apply,
.remove = flow_null_remove,
.destroy = flow_null_destroy,
+ .query = flow_null_query,
};
/**
* Pointer to the flow attributes.
*
* @return
- * flow driver type if supported, MLX5_FLOW_TYPE_MAX otherwise.
+ * flow driver type, MLX5_FLOW_TYPE_MAX otherwise.
*/
static enum mlx5_flow_drv_type
-flow_get_drv_type(struct rte_eth_dev *dev __rte_unused,
- const struct rte_flow_attr *attr)
+flow_get_drv_type(struct rte_eth_dev *dev, const struct rte_flow_attr *attr)
{
- struct priv *priv __rte_unused = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
enum mlx5_flow_drv_type type = MLX5_FLOW_TYPE_MAX;
- if (attr->transfer) {
- type = MLX5_FLOW_TYPE_TCF;
- } else {
-#ifdef HAVE_IBV_FLOW_DV_SUPPORT
- type = priv->config.dv_flow_en ? MLX5_FLOW_TYPE_DV :
- MLX5_FLOW_TYPE_VERBS;
-#else
- type = MLX5_FLOW_TYPE_VERBS;
-#endif
- }
+ if (attr->transfer && priv->config.dv_esw_en)
+ type = MLX5_FLOW_TYPE_DV;
+ if (!attr->transfer)
+ type = priv->config.dv_flow_en ? MLX5_FLOW_TYPE_DV :
+ MLX5_FLOW_TYPE_VERBS;
return type;
}
* Pointer to the list of items.
* @param[in] actions
* Pointer to the list of actions.
+ * @param[in] external
+ * This flow rule is created by request external to PMD.
* @param[out] error
* Pointer to the error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static inline int
flow_drv_validate(struct rte_eth_dev *dev,
const struct rte_flow_attr *attr,
const struct rte_flow_item items[],
const struct rte_flow_action actions[],
- struct rte_flow_error *error)
+ bool external, struct rte_flow_error *error)
{
const struct mlx5_flow_driver_ops *fops;
enum mlx5_flow_drv_type type = flow_get_drv_type(dev, attr);
fops = flow_get_drv_ops(type);
- return fops->validate(dev, attr, items, actions, error);
+ return fops->validate(dev, attr, items, actions, external, error);
}
/**
* calculates the size of memory required for device flow, allocates the memory,
* initializes the device flow and returns the pointer.
*
+ * @note
+ * This function initializes device flow structure such as dv or verbs in
+ * struct mlx5_flow. However, it is caller's responsibility to initialize the
+ * rest. For example, adding returning device flow to flow->dev_flow list and
+ * setting backward reference to the flow should be done out of this function.
+ * layers field is not filled either.
+ *
* @param[in] attr
* Pointer to the flow attributes.
* @param[in] items
* Pointer to the list of items.
* @param[in] actions
* Pointer to the list of actions.
- * @param[out] item_flags
- * Pointer to bit mask of all items detected.
- * @param[out] action_flags
- * Pointer to bit mask of all actions detected.
* @param[out] error
* Pointer to the error structure.
*
* @return
- * Pointer to device flow on success, otherwise NULL and rte_ernno is set.
+ * Pointer to device flow on success, otherwise NULL and rte_errno is set.
*/
static inline struct mlx5_flow *
-flow_drv_prepare(struct rte_flow *flow,
+flow_drv_prepare(const struct rte_flow *flow,
const struct rte_flow_attr *attr,
const struct rte_flow_item items[],
const struct rte_flow_action actions[],
- uint64_t *item_flags,
- uint64_t *action_flags,
struct rte_flow_error *error)
{
const struct mlx5_flow_driver_ops *fops;
assert(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
fops = flow_get_drv_ops(type);
- return fops->prepare(attr, items, actions, item_flags, action_flags,
- error);
+ return fops->prepare(attr, items, actions, error);
}
/**
* translates a generic flow into a driver flow. flow_drv_prepare() must
* precede.
*
+ * @note
+ * dev_flow->layers could be filled as a result of parsing during translation
+ * if needed by flow_drv_apply(). dev_flow->flow->actions can also be filled
+ * if necessary. As a flow can have multiple dev_flows by RSS flow expansion,
+ * flow->actions could be overwritten even though all the expanded dev_flows
+ * have the same actions.
*
* @param[in] dev
* Pointer to the rte dev structure.
* Pointer to the error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static inline int
flow_drv_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
* Flow driver remove API. This abstracts calling driver specific functions.
* Parent flow (rte_flow) should have driver type (drv_type). It removes a flow
* on device. All the resources of the flow should be freed by calling
- * flow_dv_destroy().
+ * flow_drv_destroy().
*
* @param[in] dev
* Pointer to Ethernet device.
const struct mlx5_flow_driver_ops *fops;
enum mlx5_flow_drv_type type = flow->drv_type;
+ flow_mreg_split_qrss_release(dev, flow);
assert(type > MLX5_FLOW_TYPE_MIN && type < MLX5_FLOW_TYPE_MAX);
fops = flow_get_drv_ops(type);
fops->destroy(dev, flow);
{
int ret;
- ret = flow_drv_validate(dev, attr, items, actions, error);
+ ret = flow_drv_validate(dev, attr, items, actions, true, error);
if (ret < 0)
return ret;
return 0;
* Pointer to the RSS action if exist, else return NULL.
*/
static const struct rte_flow_action_rss*
-mlx5_flow_get_rss_action(const struct rte_flow_action actions[])
+flow_get_rss_action(const struct rte_flow_action actions[])
{
for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
switch (actions->type) {
}
static unsigned int
-mlx5_find_graph_root(const struct rte_flow_item pattern[], uint32_t rss_level)
+find_graph_root(const struct rte_flow_item pattern[], uint32_t rss_level)
{
const struct rte_flow_item *item;
unsigned int has_vlan = 0;
}
/**
- * Create a flow and add it to @p list.
+ * Get QUEUE/RSS action from the action list.
+ *
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[out] qrss
+ * Pointer to the return pointer.
+ * @param[out] qrss_type
+ * Pointer to the action type to return. RTE_FLOW_ACTION_TYPE_END is returned
+ * if no QUEUE/RSS is found.
+ *
+ * @return
+ * Total number of actions.
+ */
+static int
+flow_parse_qrss_action(const struct rte_flow_action actions[],
+ const struct rte_flow_action **qrss)
+{
+ int actions_n = 0;
+
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_QUEUE:
+ case RTE_FLOW_ACTION_TYPE_RSS:
+ *qrss = actions;
+ break;
+ default:
+ break;
+ }
+ actions_n++;
+ }
+ /* Count RTE_FLOW_ACTION_TYPE_END. */
+ return actions_n + 1;
+}
+
+/**
+ * Check if the flow should be splited due to hairpin.
+ * The reason for the split is that in current HW we can't
+ * support encap on Rx, so if a flow have encap we move it
+ * to Tx.
*
* @param dev
* Pointer to Ethernet device.
- * @param list
- * Pointer to a TAILQ flow list.
* @param[in] attr
* Flow rule attributes.
- * @param[in] items
- * Pattern specification (list terminated by the END pattern item).
* @param[in] actions
* Associated actions (list terminated by the END action).
- * @param[out] error
- * Perform verbose error reporting if not NULL.
*
* @return
- * A flow on success, NULL otherwise and rte_errno is set.
+ * > 0 the number of actions and the flow should be split,
+ * 0 when no split required.
*/
-static struct rte_flow *
-mlx5_flow_list_create(struct rte_eth_dev *dev,
- struct mlx5_flows *list,
- const struct rte_flow_attr *attr,
- const struct rte_flow_item items[],
- const struct rte_flow_action actions[],
- struct rte_flow_error *error)
+static int
+flow_check_hairpin_split(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_action actions[])
{
- struct rte_flow *flow = NULL;
- struct mlx5_flow *dev_flow;
- uint64_t action_flags = 0;
- uint64_t item_flags = 0;
+ int queue_action = 0;
+ int action_n = 0;
+ int encap = 0;
+ const struct rte_flow_action_queue *queue;
const struct rte_flow_action_rss *rss;
- union {
- struct rte_flow_expand_rss buf;
- uint8_t buffer[2048];
- } expand_buffer;
- struct rte_flow_expand_rss *buf = &expand_buffer.buf;
- int ret;
- uint32_t i;
- uint32_t flow_size;
-
- ret = flow_drv_validate(dev, attr, items, actions, error);
- if (ret < 0)
- return NULL;
- flow_size = sizeof(struct rte_flow);
- rss = mlx5_flow_get_rss_action(actions);
- if (rss)
- flow_size += RTE_ALIGN_CEIL(rss->queue_num * sizeof(uint16_t),
- sizeof(void *));
- else
- flow_size += RTE_ALIGN_CEIL(sizeof(uint16_t), sizeof(void *));
- flow = rte_calloc(__func__, 1, flow_size, 0);
- flow->drv_type = flow_get_drv_type(dev, attr);
- assert(flow->drv_type > MLX5_FLOW_TYPE_MIN &&
- flow->drv_type < MLX5_FLOW_TYPE_MAX);
- flow->queue = (void *)(flow + 1);
- LIST_INIT(&flow->dev_flows);
- if (rss && rss->types) {
- unsigned int graph_root;
+ const struct rte_flow_action_raw_encap *raw_encap;
- graph_root = mlx5_find_graph_root(items, rss->level);
- ret = rte_flow_expand_rss(buf, sizeof(expand_buffer.buffer),
- items, rss->types,
- mlx5_support_expansion,
- graph_root);
- assert(ret > 0 &&
- (unsigned int)ret < sizeof(expand_buffer.buffer));
- } else {
+ if (!attr->ingress)
+ return 0;
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_QUEUE:
+ queue = actions->conf;
+ if (mlx5_rxq_get_type(dev, queue->index) !=
+ MLX5_RXQ_TYPE_HAIRPIN)
+ return 0;
+ queue_action = 1;
+ action_n++;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RSS:
+ rss = actions->conf;
+ if (mlx5_rxq_get_type(dev, rss->queue[0]) !=
+ MLX5_RXQ_TYPE_HAIRPIN)
+ return 0;
+ queue_action = 1;
+ action_n++;
+ break;
+ case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
+ case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
+ encap = 1;
+ action_n++;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
+ raw_encap = actions->conf;
+ if (raw_encap->size >
+ (sizeof(struct rte_flow_item_eth) +
+ sizeof(struct rte_flow_item_ipv4)))
+ encap = 1;
+ action_n++;
+ break;
+ default:
+ action_n++;
+ break;
+ }
+ }
+ if (encap == 1 && queue_action)
+ return action_n;
+ return 0;
+}
+
+/* Declare flow create/destroy prototype in advance. */
+static struct rte_flow *
+flow_list_create(struct rte_eth_dev *dev, struct mlx5_flows *list,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ bool external, struct rte_flow_error *error);
+
+static void
+flow_list_destroy(struct rte_eth_dev *dev, struct mlx5_flows *list,
+ struct rte_flow *flow);
+
+/**
+ * Add a flow of copying flow metadata registers in RX_CP_TBL.
+ *
+ * As mark_id is unique, if there's already a registered flow for the mark_id,
+ * return by increasing the reference counter of the resource. Otherwise, create
+ * the resource (mcp_res) and flow.
+ *
+ * Flow looks like,
+ * - If ingress port is ANY and reg_c[1] is mark_id,
+ * flow_tag := mark_id, reg_b := reg_c[0] and jump to RX_ACT_TBL.
+ *
+ * For default flow (zero mark_id), flow is like,
+ * - If ingress port is ANY,
+ * reg_b := reg_c[0] and jump to RX_ACT_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param mark_id
+ * ID of MARK action, zero means default flow for META.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * Associated resource on success, NULL otherwise and rte_errno is set.
+ */
+static struct mlx5_flow_mreg_copy_resource *
+flow_mreg_add_copy_action(struct rte_eth_dev *dev, uint32_t mark_id,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct rte_flow_attr attr = {
+ .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
+ .ingress = 1,
+ };
+ struct mlx5_rte_flow_item_tag tag_spec = {
+ .data = mark_id,
+ };
+ struct rte_flow_item items[] = {
+ [1] = { .type = RTE_FLOW_ITEM_TYPE_END, },
+ };
+ struct rte_flow_action_mark ftag = {
+ .id = mark_id,
+ };
+ struct mlx5_flow_action_copy_mreg cp_mreg = {
+ .dst = REG_B,
+ .src = 0,
+ };
+ struct rte_flow_action_jump jump = {
+ .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
+ };
+ struct rte_flow_action actions[] = {
+ [3] = { .type = RTE_FLOW_ACTION_TYPE_END, },
+ };
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+ int ret;
+
+ /* Fill the register fileds in the flow. */
+ ret = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, error);
+ if (ret < 0)
+ return NULL;
+ tag_spec.id = ret;
+ ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_RX, 0, error);
+ if (ret < 0)
+ return NULL;
+ cp_mreg.src = ret;
+ /* Check if already registered. */
+ assert(priv->mreg_cp_tbl);
+ mcp_res = (void *)mlx5_hlist_lookup(priv->mreg_cp_tbl, mark_id);
+ if (mcp_res) {
+ /* For non-default rule. */
+ if (mark_id)
+ mcp_res->refcnt++;
+ assert(mark_id || mcp_res->refcnt == 1);
+ return mcp_res;
+ }
+ /* Provide the full width of FLAG specific value. */
+ if (mark_id == (priv->sh->dv_regc0_mask & MLX5_FLOW_MARK_DEFAULT))
+ tag_spec.data = MLX5_FLOW_MARK_DEFAULT;
+ /* Build a new flow. */
+ if (mark_id) {
+ items[0] = (struct rte_flow_item){
+ .type = MLX5_RTE_FLOW_ITEM_TYPE_TAG,
+ .spec = &tag_spec,
+ };
+ items[1] = (struct rte_flow_item){
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ };
+ actions[0] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_MARK,
+ .conf = &ftag,
+ };
+ actions[1] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
+ .conf = &cp_mreg,
+ };
+ actions[2] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_JUMP,
+ .conf = &jump,
+ };
+ actions[3] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ };
+ } else {
+ /* Default rule, wildcard match. */
+ attr.priority = MLX5_FLOW_PRIO_RSVD;
+ items[0] = (struct rte_flow_item){
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ };
+ actions[0] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
+ .conf = &cp_mreg,
+ };
+ actions[1] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_JUMP,
+ .conf = &jump,
+ };
+ actions[2] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ };
+ }
+ /* Build a new entry. */
+ mcp_res = rte_zmalloc(__func__, sizeof(*mcp_res), 0);
+ if (!mcp_res) {
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+ /*
+ * The copy Flows are not included in any list. There
+ * ones are referenced from other Flows and can not
+ * be applied, removed, deleted in ardbitrary order
+ * by list traversing.
+ */
+ mcp_res->flow = flow_list_create(dev, NULL, &attr, items,
+ actions, false, error);
+ if (!mcp_res->flow)
+ goto error;
+ mcp_res->refcnt++;
+ mcp_res->hlist_ent.key = mark_id;
+ ret = mlx5_hlist_insert(priv->mreg_cp_tbl,
+ &mcp_res->hlist_ent);
+ assert(!ret);
+ if (ret)
+ goto error;
+ return mcp_res;
+error:
+ if (mcp_res->flow)
+ flow_list_destroy(dev, NULL, mcp_res->flow);
+ rte_free(mcp_res);
+ return NULL;
+}
+
+/**
+ * Release flow in RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @flow
+ * Parent flow for wich copying is provided.
+ */
+static void
+flow_mreg_del_copy_action(struct rte_eth_dev *dev,
+ struct rte_flow *flow)
+{
+ struct mlx5_flow_mreg_copy_resource *mcp_res = flow->mreg_copy;
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ if (!mcp_res || !priv->mreg_cp_tbl)
+ return;
+ if (flow->copy_applied) {
+ assert(mcp_res->appcnt);
+ flow->copy_applied = 0;
+ --mcp_res->appcnt;
+ if (!mcp_res->appcnt)
+ flow_drv_remove(dev, mcp_res->flow);
+ }
+ /*
+ * We do not check availability of metadata registers here,
+ * because copy resources are allocated in this case.
+ */
+ if (--mcp_res->refcnt)
+ return;
+ assert(mcp_res->flow);
+ flow_list_destroy(dev, NULL, mcp_res->flow);
+ mlx5_hlist_remove(priv->mreg_cp_tbl, &mcp_res->hlist_ent);
+ rte_free(mcp_res);
+ flow->mreg_copy = NULL;
+}
+
+/**
+ * Start flow in RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @flow
+ * Parent flow for wich copying is provided.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_mreg_start_copy_action(struct rte_eth_dev *dev,
+ struct rte_flow *flow)
+{
+ struct mlx5_flow_mreg_copy_resource *mcp_res = flow->mreg_copy;
+ int ret;
+
+ if (!mcp_res || flow->copy_applied)
+ return 0;
+ if (!mcp_res->appcnt) {
+ ret = flow_drv_apply(dev, mcp_res->flow, NULL);
+ if (ret)
+ return ret;
+ }
+ ++mcp_res->appcnt;
+ flow->copy_applied = 1;
+ return 0;
+}
+
+/**
+ * Stop flow in RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @flow
+ * Parent flow for wich copying is provided.
+ */
+static void
+flow_mreg_stop_copy_action(struct rte_eth_dev *dev,
+ struct rte_flow *flow)
+{
+ struct mlx5_flow_mreg_copy_resource *mcp_res = flow->mreg_copy;
+
+ if (!mcp_res || !flow->copy_applied)
+ return;
+ assert(mcp_res->appcnt);
+ --mcp_res->appcnt;
+ flow->copy_applied = 0;
+ if (!mcp_res->appcnt)
+ flow_drv_remove(dev, mcp_res->flow);
+}
+
+/**
+ * Remove the default copy action from RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ */
+static void
+flow_mreg_del_default_copy_action(struct rte_eth_dev *dev)
+{
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ /* Check if default flow is registered. */
+ if (!priv->mreg_cp_tbl)
+ return;
+ mcp_res = (void *)mlx5_hlist_lookup(priv->mreg_cp_tbl, 0ULL);
+ if (!mcp_res)
+ return;
+ assert(mcp_res->flow);
+ flow_list_destroy(dev, NULL, mcp_res->flow);
+ mlx5_hlist_remove(priv->mreg_cp_tbl, &mcp_res->hlist_ent);
+ rte_free(mcp_res);
+}
+
+/**
+ * Add the default copy action in in RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * 0 for success, negative value otherwise and rte_errno is set.
+ */
+static int
+flow_mreg_add_default_copy_action(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+
+ /* Check whether extensive metadata feature is engaged. */
+ if (!priv->config.dv_flow_en ||
+ priv->config.dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
+ !mlx5_flow_ext_mreg_supported(dev) ||
+ !priv->sh->dv_regc0_mask)
+ return 0;
+ mcp_res = flow_mreg_add_copy_action(dev, 0, error);
+ if (!mcp_res)
+ return -rte_errno;
+ return 0;
+}
+
+/**
+ * Add a flow of copying flow metadata registers in RX_CP_TBL.
+ *
+ * All the flow having Q/RSS action should be split by
+ * flow_mreg_split_qrss_prep() to pass by RX_CP_TBL. A flow in the RX_CP_TBL
+ * performs the following,
+ * - CQE->flow_tag := reg_c[1] (MARK)
+ * - CQE->flow_table_metadata (reg_b) := reg_c[0] (META)
+ * As CQE's flow_tag is not a register, it can't be simply copied from reg_c[1]
+ * but there should be a flow per each MARK ID set by MARK action.
+ *
+ * For the aforementioned reason, if there's a MARK action in flow's action
+ * list, a corresponding flow should be added to the RX_CP_TBL in order to copy
+ * the MARK ID to CQE's flow_tag like,
+ * - If reg_c[1] is mark_id,
+ * flow_tag := mark_id, reg_b := reg_c[0] and jump to RX_ACT_TBL.
+ *
+ * For SET_META action which stores value in reg_c[0], as the destination is
+ * also a flow metadata register (reg_b), adding a default flow is enough. Zero
+ * MARK ID means the default flow. The default flow looks like,
+ * - For all flow, reg_b := reg_c[0] and jump to RX_ACT_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param flow
+ * Pointer to flow structure.
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * 0 on success, negative value otherwise and rte_errno is set.
+ */
+static int
+flow_mreg_update_copy_table(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ const struct rte_flow_action *actions,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *config = &priv->config;
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+ const struct rte_flow_action_mark *mark;
+
+ /* Check whether extensive metadata feature is engaged. */
+ if (!config->dv_flow_en ||
+ config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
+ !mlx5_flow_ext_mreg_supported(dev) ||
+ !priv->sh->dv_regc0_mask)
+ return 0;
+ /* Find MARK action. */
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_FLAG:
+ mcp_res = flow_mreg_add_copy_action
+ (dev, MLX5_FLOW_MARK_DEFAULT, error);
+ if (!mcp_res)
+ return -rte_errno;
+ flow->mreg_copy = mcp_res;
+ if (dev->data->dev_started) {
+ mcp_res->appcnt++;
+ flow->copy_applied = 1;
+ }
+ return 0;
+ case RTE_FLOW_ACTION_TYPE_MARK:
+ mark = (const struct rte_flow_action_mark *)
+ actions->conf;
+ mcp_res =
+ flow_mreg_add_copy_action(dev, mark->id, error);
+ if (!mcp_res)
+ return -rte_errno;
+ flow->mreg_copy = mcp_res;
+ if (dev->data->dev_started) {
+ mcp_res->appcnt++;
+ flow->copy_applied = 1;
+ }
+ return 0;
+ default:
+ break;
+ }
+ }
+ return 0;
+}
+
+#define MLX5_MAX_SPLIT_ACTIONS 24
+#define MLX5_MAX_SPLIT_ITEMS 24
+
+/**
+ * Split the hairpin flow.
+ * Since HW can't support encap on Rx we move the encap to Tx.
+ * If the count action is after the encap then we also
+ * move the count action. in this case the count will also measure
+ * the outer bytes.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[out] actions_rx
+ * Rx flow actions.
+ * @param[out] actions_tx
+ * Tx flow actions..
+ * @param[out] pattern_tx
+ * The pattern items for the Tx flow.
+ * @param[out] flow_id
+ * The flow ID connected to this flow.
+ *
+ * @return
+ * 0 on success.
+ */
+static int
+flow_hairpin_split(struct rte_eth_dev *dev,
+ const struct rte_flow_action actions[],
+ struct rte_flow_action actions_rx[],
+ struct rte_flow_action actions_tx[],
+ struct rte_flow_item pattern_tx[],
+ uint32_t *flow_id)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ const struct rte_flow_action_raw_encap *raw_encap;
+ const struct rte_flow_action_raw_decap *raw_decap;
+ struct mlx5_rte_flow_action_set_tag *set_tag;
+ struct rte_flow_action *tag_action;
+ struct mlx5_rte_flow_item_tag *tag_item;
+ struct rte_flow_item *item;
+ char *addr;
+ int encap = 0;
+
+ mlx5_flow_id_get(priv->sh->flow_id_pool, flow_id);
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
+ case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
+ rte_memcpy(actions_tx, actions,
+ sizeof(struct rte_flow_action));
+ actions_tx++;
+ break;
+ case RTE_FLOW_ACTION_TYPE_COUNT:
+ if (encap) {
+ rte_memcpy(actions_tx, actions,
+ sizeof(struct rte_flow_action));
+ actions_tx++;
+ } else {
+ rte_memcpy(actions_rx, actions,
+ sizeof(struct rte_flow_action));
+ actions_rx++;
+ }
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
+ raw_encap = actions->conf;
+ if (raw_encap->size >
+ (sizeof(struct rte_flow_item_eth) +
+ sizeof(struct rte_flow_item_ipv4))) {
+ memcpy(actions_tx, actions,
+ sizeof(struct rte_flow_action));
+ actions_tx++;
+ encap = 1;
+ } else {
+ rte_memcpy(actions_rx, actions,
+ sizeof(struct rte_flow_action));
+ actions_rx++;
+ }
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
+ raw_decap = actions->conf;
+ if (raw_decap->size <
+ (sizeof(struct rte_flow_item_eth) +
+ sizeof(struct rte_flow_item_ipv4))) {
+ memcpy(actions_tx, actions,
+ sizeof(struct rte_flow_action));
+ actions_tx++;
+ } else {
+ rte_memcpy(actions_rx, actions,
+ sizeof(struct rte_flow_action));
+ actions_rx++;
+ }
+ break;
+ default:
+ rte_memcpy(actions_rx, actions,
+ sizeof(struct rte_flow_action));
+ actions_rx++;
+ break;
+ }
+ }
+ /* Add set meta action and end action for the Rx flow. */
+ tag_action = actions_rx;
+ tag_action->type = MLX5_RTE_FLOW_ACTION_TYPE_TAG;
+ actions_rx++;
+ rte_memcpy(actions_rx, actions, sizeof(struct rte_flow_action));
+ actions_rx++;
+ set_tag = (void *)actions_rx;
+ set_tag->id = mlx5_flow_get_reg_id(dev, MLX5_HAIRPIN_RX, 0, NULL);
+ assert(set_tag->id > REG_NONE);
+ set_tag->data = *flow_id;
+ tag_action->conf = set_tag;
+ /* Create Tx item list. */
+ rte_memcpy(actions_tx, actions, sizeof(struct rte_flow_action));
+ addr = (void *)&pattern_tx[2];
+ item = pattern_tx;
+ item->type = MLX5_RTE_FLOW_ITEM_TYPE_TAG;
+ tag_item = (void *)addr;
+ tag_item->data = *flow_id;
+ tag_item->id = mlx5_flow_get_reg_id(dev, MLX5_HAIRPIN_TX, 0, NULL);
+ assert(set_tag->id > REG_NONE);
+ item->spec = tag_item;
+ addr += sizeof(struct mlx5_rte_flow_item_tag);
+ tag_item = (void *)addr;
+ tag_item->data = UINT32_MAX;
+ tag_item->id = UINT16_MAX;
+ item->mask = tag_item;
+ addr += sizeof(struct mlx5_rte_flow_item_tag);
+ item->last = NULL;
+ item++;
+ item->type = RTE_FLOW_ITEM_TYPE_END;
+ return 0;
+}
+
+/**
+ * The last stage of splitting chain, just creates the subflow
+ * without any modification.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Parent flow structure pointer.
+ * @param[in, out] sub_flow
+ * Pointer to return the created subflow, may be NULL.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[in] external
+ * This flow rule is created by request external to PMD.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ * @return
+ * 0 on success, negative value otherwise
+ */
+static int
+flow_create_split_inner(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ struct mlx5_flow **sub_flow,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ bool external, struct rte_flow_error *error)
+{
+ struct mlx5_flow *dev_flow;
+
+ dev_flow = flow_drv_prepare(flow, attr, items, actions, error);
+ if (!dev_flow)
+ return -rte_errno;
+ dev_flow->flow = flow;
+ dev_flow->external = external;
+ /* Subflow object was created, we must include one in the list. */
+ LIST_INSERT_HEAD(&flow->dev_flows, dev_flow, next);
+ if (sub_flow)
+ *sub_flow = dev_flow;
+ return flow_drv_translate(dev, dev_flow, attr, items, actions, error);
+}
+
+/**
+ * Split action list having QUEUE/RSS for metadata register copy.
+ *
+ * Once Q/RSS action is detected in user's action list, the flow action
+ * should be split in order to copy metadata registers, which will happen in
+ * RX_CP_TBL like,
+ * - CQE->flow_tag := reg_c[1] (MARK)
+ * - CQE->flow_table_metadata (reg_b) := reg_c[0] (META)
+ * The Q/RSS action will be performed on RX_ACT_TBL after passing by RX_CP_TBL.
+ * This is because the last action of each flow must be a terminal action
+ * (QUEUE, RSS or DROP).
+ *
+ * Flow ID must be allocated to identify actions in the RX_ACT_TBL and it is
+ * stored and kept in the mlx5_flow structure per each sub_flow.
+ *
+ * The Q/RSS action is replaced with,
+ * - SET_TAG, setting the allocated flow ID to reg_c[2].
+ * And the following JUMP action is added at the end,
+ * - JUMP, to RX_CP_TBL.
+ *
+ * A flow to perform remained Q/RSS action will be created in RX_ACT_TBL by
+ * flow_create_split_metadata() routine. The flow will look like,
+ * - If flow ID matches (reg_c[2]), perform Q/RSS.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[out] split_actions
+ * Pointer to store split actions to jump to CP_TBL.
+ * @param[in] actions
+ * Pointer to the list of original flow actions.
+ * @param[in] qrss
+ * Pointer to the Q/RSS action.
+ * @param[in] actions_n
+ * Number of original actions.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * non-zero unique flow_id on success, otherwise 0 and
+ * error/rte_error are set.
+ */
+static uint32_t
+flow_mreg_split_qrss_prep(struct rte_eth_dev *dev,
+ struct rte_flow_action *split_actions,
+ const struct rte_flow_action *actions,
+ const struct rte_flow_action *qrss,
+ int actions_n, struct rte_flow_error *error)
+{
+ struct mlx5_rte_flow_action_set_tag *set_tag;
+ struct rte_flow_action_jump *jump;
+ const int qrss_idx = qrss - actions;
+ uint32_t flow_id;
+ int ret = 0;
+
+ /*
+ * Given actions will be split
+ * - Replace QUEUE/RSS action with SET_TAG to set flow ID.
+ * - Add jump to mreg CP_TBL.
+ * As a result, there will be one more action.
+ */
+ ++actions_n;
+ /*
+ * Allocate the new subflow ID. This one is unique within
+ * device and not shared with representors. Otherwise,
+ * we would have to resolve multi-thread access synch
+ * issue. Each flow on the shared device is appended
+ * with source vport identifier, so the resulting
+ * flows will be unique in the shared (by master and
+ * representors) domain even if they have coinciding
+ * IDs.
+ */
+ flow_id = flow_qrss_get_id(dev);
+ if (!flow_id)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "can't allocate id "
+ "for split Q/RSS subflow");
+ /* Internal SET_TAG action to set flow ID. */
+ set_tag = (void *)(split_actions + actions_n);
+ *set_tag = (struct mlx5_rte_flow_action_set_tag){
+ .data = flow_id,
+ };
+ ret = mlx5_flow_get_reg_id(dev, MLX5_COPY_MARK, 0, error);
+ if (ret < 0)
+ return ret;
+ set_tag->id = ret;
+ /* JUMP action to jump to mreg copy table (CP_TBL). */
+ jump = (void *)(set_tag + 1);
+ *jump = (struct rte_flow_action_jump){
+ .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
+ };
+ /* Construct new actions array. */
+ memcpy(split_actions, actions, sizeof(*split_actions) * actions_n);
+ /* Replace QUEUE/RSS action. */
+ split_actions[qrss_idx] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_TAG,
+ .conf = set_tag,
+ };
+ split_actions[actions_n - 2] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_JUMP,
+ .conf = jump,
+ };
+ split_actions[actions_n - 1] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ };
+ return flow_id;
+}
+
+/**
+ * Extend the given action list for Tx metadata copy.
+ *
+ * Copy the given action list to the ext_actions and add flow metadata register
+ * copy action in order to copy reg_a set by WQE to reg_c[0].
+ *
+ * @param[out] ext_actions
+ * Pointer to the extended action list.
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[in] actions_n
+ * Number of actions in the list.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * 0 on success, negative value otherwise
+ */
+static int
+flow_mreg_tx_copy_prep(struct rte_eth_dev *dev,
+ struct rte_flow_action *ext_actions,
+ const struct rte_flow_action *actions,
+ int actions_n, struct rte_flow_error *error)
+{
+ struct mlx5_flow_action_copy_mreg *cp_mreg =
+ (struct mlx5_flow_action_copy_mreg *)
+ (ext_actions + actions_n + 1);
+ int ret;
+
+ ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_RX, 0, error);
+ if (ret < 0)
+ return ret;
+ cp_mreg->dst = ret;
+ ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_TX, 0, error);
+ if (ret < 0)
+ return ret;
+ cp_mreg->src = ret;
+ memcpy(ext_actions, actions,
+ sizeof(*ext_actions) * actions_n);
+ ext_actions[actions_n - 1] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
+ .conf = cp_mreg,
+ };
+ ext_actions[actions_n] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ };
+ return 0;
+}
+
+/**
+ * The splitting for metadata feature.
+ *
+ * - Q/RSS action on NIC Rx should be split in order to pass by
+ * the mreg copy table (RX_CP_TBL) and then it jumps to the
+ * action table (RX_ACT_TBL) which has the split Q/RSS action.
+ *
+ * - All the actions on NIC Tx should have a mreg copy action to
+ * copy reg_a from WQE to reg_c[0].
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Parent flow structure pointer.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[in] external
+ * This flow rule is created by request external to PMD.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ * @return
+ * 0 on success, negative value otherwise
+ */
+static int
+flow_create_split_metadata(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ bool external, struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *config = &priv->config;
+ const struct rte_flow_action *qrss = NULL;
+ struct rte_flow_action *ext_actions = NULL;
+ struct mlx5_flow *dev_flow = NULL;
+ uint32_t qrss_id = 0;
+ size_t act_size;
+ int actions_n;
+ int ret;
+
+ /* Check whether extensive metadata feature is engaged. */
+ if (!config->dv_flow_en ||
+ config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
+ !mlx5_flow_ext_mreg_supported(dev))
+ return flow_create_split_inner(dev, flow, NULL, attr, items,
+ actions, external, error);
+ actions_n = flow_parse_qrss_action(actions, &qrss);
+ if (qrss) {
+ /* Exclude hairpin flows from splitting. */
+ if (qrss->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
+ const struct rte_flow_action_queue *queue;
+
+ queue = qrss->conf;
+ if (mlx5_rxq_get_type(dev, queue->index) ==
+ MLX5_RXQ_TYPE_HAIRPIN)
+ qrss = NULL;
+ } else if (qrss->type == RTE_FLOW_ACTION_TYPE_RSS) {
+ const struct rte_flow_action_rss *rss;
+
+ rss = qrss->conf;
+ if (mlx5_rxq_get_type(dev, rss->queue[0]) ==
+ MLX5_RXQ_TYPE_HAIRPIN)
+ qrss = NULL;
+ }
+ }
+ if (qrss) {
+ /*
+ * Q/RSS action on NIC Rx should be split in order to pass by
+ * the mreg copy table (RX_CP_TBL) and then it jumps to the
+ * action table (RX_ACT_TBL) which has the split Q/RSS action.
+ */
+ act_size = sizeof(struct rte_flow_action) * (actions_n + 1) +
+ sizeof(struct rte_flow_action_set_tag) +
+ sizeof(struct rte_flow_action_jump);
+ ext_actions = rte_zmalloc(__func__, act_size, 0);
+ if (!ext_actions)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "no memory to split "
+ "metadata flow");
+ /*
+ * Create the new actions list with removed Q/RSS action
+ * and appended set tag and jump to register copy table
+ * (RX_CP_TBL). We should preallocate unique tag ID here
+ * in advance, because it is needed for set tag action.
+ */
+ qrss_id = flow_mreg_split_qrss_prep(dev, ext_actions, actions,
+ qrss, actions_n, error);
+ if (!qrss_id) {
+ ret = -rte_errno;
+ goto exit;
+ }
+ } else if (attr->egress && !attr->transfer) {
+ /*
+ * All the actions on NIC Tx should have a metadata register
+ * copy action to copy reg_a from WQE to reg_c[meta]
+ */
+ act_size = sizeof(struct rte_flow_action) * (actions_n + 1) +
+ sizeof(struct mlx5_flow_action_copy_mreg);
+ ext_actions = rte_zmalloc(__func__, act_size, 0);
+ if (!ext_actions)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "no memory to split "
+ "metadata flow");
+ /* Create the action list appended with copy register. */
+ ret = flow_mreg_tx_copy_prep(dev, ext_actions, actions,
+ actions_n, error);
+ if (ret < 0)
+ goto exit;
+ }
+ /* Add the unmodified original or prefix subflow. */
+ ret = flow_create_split_inner(dev, flow, &dev_flow, attr, items,
+ ext_actions ? ext_actions : actions,
+ external, error);
+ if (ret < 0)
+ goto exit;
+ assert(dev_flow);
+ if (qrss_id) {
+ const struct rte_flow_attr q_attr = {
+ .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
+ .ingress = 1,
+ };
+ /* Internal PMD action to set register. */
+ struct mlx5_rte_flow_item_tag q_tag_spec = {
+ .data = qrss_id,
+ .id = 0,
+ };
+ struct rte_flow_item q_items[] = {
+ {
+ .type = MLX5_RTE_FLOW_ITEM_TYPE_TAG,
+ .spec = &q_tag_spec,
+ .last = NULL,
+ .mask = NULL,
+ },
+ {
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ },
+ };
+ struct rte_flow_action q_actions[] = {
+ {
+ .type = qrss->type,
+ .conf = qrss->conf,
+ },
+ {
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ },
+ };
+ uint64_t hash_fields = dev_flow->hash_fields;
+ /*
+ * Put unique id in prefix flow due to it is destroyed after
+ * prefix flow and id will be freed after there is no actual
+ * flows with this id and identifier reallocation becomes
+ * possible (for example, for other flows in other threads).
+ */
+ dev_flow->qrss_id = qrss_id;
+ qrss_id = 0;
+ dev_flow = NULL;
+ ret = mlx5_flow_get_reg_id(dev, MLX5_COPY_MARK, 0, error);
+ if (ret < 0)
+ goto exit;
+ q_tag_spec.id = ret;
+ /* Add suffix subflow to execute Q/RSS. */
+ ret = flow_create_split_inner(dev, flow, &dev_flow,
+ &q_attr, q_items, q_actions,
+ external, error);
+ if (ret < 0)
+ goto exit;
+ assert(dev_flow);
+ dev_flow->hash_fields = hash_fields;
+ }
+
+exit:
+ /*
+ * We do not destroy the partially created sub_flows in case of error.
+ * These ones are included into parent flow list and will be destroyed
+ * by flow_drv_destroy.
+ */
+ flow_qrss_free_id(dev, qrss_id);
+ rte_free(ext_actions);
+ return ret;
+}
+
+/**
+ * Split the flow to subflow set. The splitters might be linked
+ * in the chain, like this:
+ * flow_create_split_outer() calls:
+ * flow_create_split_meter() calls:
+ * flow_create_split_metadata(meter_subflow_0) calls:
+ * flow_create_split_inner(metadata_subflow_0)
+ * flow_create_split_inner(metadata_subflow_1)
+ * flow_create_split_inner(metadata_subflow_2)
+ * flow_create_split_metadata(meter_subflow_1) calls:
+ * flow_create_split_inner(metadata_subflow_0)
+ * flow_create_split_inner(metadata_subflow_1)
+ * flow_create_split_inner(metadata_subflow_2)
+ *
+ * This provide flexible way to add new levels of flow splitting.
+ * The all of successfully created subflows are included to the
+ * parent flow dev_flow list.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Parent flow structure pointer.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[in] external
+ * This flow rule is created by request external to PMD.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ * @return
+ * 0 on success, negative value otherwise
+ */
+static int
+flow_create_split_outer(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ bool external, struct rte_flow_error *error)
+{
+ int ret;
+
+ ret = flow_create_split_metadata(dev, flow, attr, items,
+ actions, external, error);
+ assert(ret <= 0);
+ return ret;
+}
+
+/**
+ * Create a flow and add it to @p list.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param list
+ * Pointer to a TAILQ flow list. If this parameter NULL,
+ * no list insertion occurred, flow is just created,
+ * this is caller's responsibility to track the
+ * created flow.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[in] external
+ * This flow rule is created by request external to PMD.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * A flow on success, NULL otherwise and rte_errno is set.
+ */
+static struct rte_flow *
+flow_list_create(struct rte_eth_dev *dev, struct mlx5_flows *list,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ bool external, struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct rte_flow *flow = NULL;
+ struct mlx5_flow *dev_flow;
+ const struct rte_flow_action_rss *rss;
+ union {
+ struct rte_flow_expand_rss buf;
+ uint8_t buffer[2048];
+ } expand_buffer;
+ union {
+ struct rte_flow_action actions[MLX5_MAX_SPLIT_ACTIONS];
+ uint8_t buffer[2048];
+ } actions_rx;
+ union {
+ struct rte_flow_action actions[MLX5_MAX_SPLIT_ACTIONS];
+ uint8_t buffer[2048];
+ } actions_hairpin_tx;
+ union {
+ struct rte_flow_item items[MLX5_MAX_SPLIT_ITEMS];
+ uint8_t buffer[2048];
+ } items_tx;
+ struct rte_flow_expand_rss *buf = &expand_buffer.buf;
+ const struct rte_flow_action *p_actions_rx = actions;
+ int ret;
+ uint32_t i;
+ uint32_t flow_size;
+ int hairpin_flow = 0;
+ uint32_t hairpin_id = 0;
+ struct rte_flow_attr attr_tx = { .priority = 0 };
+
+ hairpin_flow = flow_check_hairpin_split(dev, attr, actions);
+ if (hairpin_flow > 0) {
+ if (hairpin_flow > MLX5_MAX_SPLIT_ACTIONS) {
+ rte_errno = EINVAL;
+ return NULL;
+ }
+ flow_hairpin_split(dev, actions, actions_rx.actions,
+ actions_hairpin_tx.actions, items_tx.items,
+ &hairpin_id);
+ p_actions_rx = actions_rx.actions;
+ }
+ ret = flow_drv_validate(dev, attr, items, p_actions_rx, external,
+ error);
+ if (ret < 0)
+ goto error_before_flow;
+ flow_size = sizeof(struct rte_flow);
+ rss = flow_get_rss_action(p_actions_rx);
+ if (rss)
+ flow_size += RTE_ALIGN_CEIL(rss->queue_num * sizeof(uint16_t),
+ sizeof(void *));
+ else
+ flow_size += RTE_ALIGN_CEIL(sizeof(uint16_t), sizeof(void *));
+ flow = rte_calloc(__func__, 1, flow_size, 0);
+ if (!flow) {
+ rte_errno = ENOMEM;
+ goto error_before_flow;
+ }
+ flow->drv_type = flow_get_drv_type(dev, attr);
+ if (hairpin_id != 0)
+ flow->hairpin_flow_id = hairpin_id;
+ assert(flow->drv_type > MLX5_FLOW_TYPE_MIN &&
+ flow->drv_type < MLX5_FLOW_TYPE_MAX);
+ flow->rss.queue = (void *)(flow + 1);
+ if (rss) {
+ /*
+ * The following information is required by
+ * mlx5_flow_hashfields_adjust() in advance.
+ */
+ flow->rss.level = rss->level;
+ /* RSS type 0 indicates default RSS type (ETH_RSS_IP). */
+ flow->rss.types = !rss->types ? ETH_RSS_IP : rss->types;
+ }
+ LIST_INIT(&flow->dev_flows);
+ if (rss && rss->types) {
+ unsigned int graph_root;
+
+ graph_root = find_graph_root(items, rss->level);
+ ret = rte_flow_expand_rss(buf, sizeof(expand_buffer.buffer),
+ items, rss->types,
+ mlx5_support_expansion,
+ graph_root);
+ assert(ret > 0 &&
+ (unsigned int)ret < sizeof(expand_buffer.buffer));
+ } else {
buf->entries = 1;
buf->entry[0].pattern = (void *)(uintptr_t)items;
}
for (i = 0; i < buf->entries; ++i) {
- dev_flow = flow_drv_prepare(flow, attr, buf->entry[i].pattern,
- actions, &item_flags, &action_flags,
- error);
+ /*
+ * The splitter may create multiple dev_flows,
+ * depending on configuration. In the simplest
+ * case it just creates unmodified original flow.
+ */
+ ret = flow_create_split_outer(dev, flow, attr,
+ buf->entry[i].pattern,
+ p_actions_rx, external,
+ error);
+ if (ret < 0)
+ goto error;
+ }
+ /* Create the tx flow. */
+ if (hairpin_flow) {
+ attr_tx.group = MLX5_HAIRPIN_TX_TABLE;
+ attr_tx.ingress = 0;
+ attr_tx.egress = 1;
+ dev_flow = flow_drv_prepare(flow, &attr_tx, items_tx.items,
+ actions_hairpin_tx.actions, error);
if (!dev_flow)
goto error;
dev_flow->flow = flow;
+ dev_flow->external = 0;
LIST_INSERT_HEAD(&flow->dev_flows, dev_flow, next);
- ret = flow_drv_translate(dev, dev_flow, attr,
- buf->entry[i].pattern,
- actions, error);
+ ret = flow_drv_translate(dev, dev_flow, &attr_tx,
+ items_tx.items,
+ actions_hairpin_tx.actions, error);
if (ret < 0)
goto error;
}
+ /*
+ * Update the metadata register copy table. If extensive
+ * metadata feature is enabled and registers are supported
+ * we might create the extra rte_flow for each unique
+ * MARK/FLAG action ID.
+ *
+ * The table is updated for ingress Flows only, because
+ * the egress Flows belong to the different device and
+ * copy table should be updated in peer NIC Rx domain.
+ */
+ if (attr->ingress &&
+ (external || attr->group != MLX5_FLOW_MREG_CP_TABLE_GROUP)) {
+ ret = flow_mreg_update_copy_table(dev, flow, actions, error);
+ if (ret)
+ goto error;
+ }
if (dev->data->dev_started) {
ret = flow_drv_apply(dev, flow, error);
if (ret < 0)
goto error;
}
- TAILQ_INSERT_TAIL(list, flow, next);
- mlx5_flow_rxq_flags_set(dev, flow);
+ if (list)
+ TAILQ_INSERT_TAIL(list, flow, next);
+ flow_rxq_flags_set(dev, flow);
return flow;
+error_before_flow:
+ if (hairpin_id)
+ mlx5_flow_id_release(priv->sh->flow_id_pool,
+ hairpin_id);
+ return NULL;
error:
+ assert(flow);
+ flow_mreg_del_copy_action(dev, flow);
ret = rte_errno; /* Save rte_errno before cleanup. */
+ if (flow->hairpin_flow_id)
+ mlx5_flow_id_release(priv->sh->flow_id_pool,
+ flow->hairpin_flow_id);
assert(flow);
flow_drv_destroy(dev, flow);
rte_free(flow);
return NULL;
}
+/**
+ * Create a dedicated flow rule on e-switch table 0 (root table), to direct all
+ * incoming packets to table 1.
+ *
+ * Other flow rules, requested for group n, will be created in
+ * e-switch table n+1.
+ * Jump action to e-switch group n will be created to group n+1.
+ *
+ * Used when working in switchdev mode, to utilise advantages of table 1
+ * and above.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ *
+ * @return
+ * Pointer to flow on success, NULL otherwise and rte_errno is set.
+ */
+struct rte_flow *
+mlx5_flow_create_esw_table_zero_flow(struct rte_eth_dev *dev)
+{
+ const struct rte_flow_attr attr = {
+ .group = 0,
+ .priority = 0,
+ .ingress = 1,
+ .egress = 0,
+ .transfer = 1,
+ };
+ const struct rte_flow_item pattern = {
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ };
+ struct rte_flow_action_jump jump = {
+ .group = 1,
+ };
+ const struct rte_flow_action actions[] = {
+ {
+ .type = RTE_FLOW_ACTION_TYPE_JUMP,
+ .conf = &jump,
+ },
+ {
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ },
+ };
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct rte_flow_error error;
+
+ return flow_list_create(dev, &priv->ctrl_flows, &attr, &pattern,
+ actions, false, &error);
+}
+
/**
* Create a flow.
*
const struct rte_flow_action actions[],
struct rte_flow_error *error)
{
- return mlx5_flow_list_create
- (dev, &((struct priv *)dev->data->dev_private)->flows,
- attr, items, actions, error);
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ return flow_list_create(dev, &priv->flows,
+ attr, items, actions, true, error);
}
/**
* @param dev
* Pointer to Ethernet device.
* @param list
- * Pointer to a TAILQ flow list.
+ * Pointer to a TAILQ flow list. If this parameter NULL,
+ * there is no flow removal from the list.
* @param[in] flow
* Flow to destroy.
*/
static void
-mlx5_flow_list_destroy(struct rte_eth_dev *dev, struct mlx5_flows *list,
- struct rte_flow *flow)
+flow_list_destroy(struct rte_eth_dev *dev, struct mlx5_flows *list,
+ struct rte_flow *flow)
{
- flow_drv_destroy(dev, flow);
- TAILQ_REMOVE(list, flow, next);
+ struct mlx5_priv *priv = dev->data->dev_private;
+
/*
* Update RX queue flags only if port is started, otherwise it is
* already clean.
*/
if (dev->data->dev_started)
- mlx5_flow_rxq_flags_trim(dev, flow);
+ flow_rxq_flags_trim(dev, flow);
+ if (flow->hairpin_flow_id)
+ mlx5_flow_id_release(priv->sh->flow_id_pool,
+ flow->hairpin_flow_id);
+ flow_drv_destroy(dev, flow);
+ if (list)
+ TAILQ_REMOVE(list, flow, next);
+ flow_mreg_del_copy_action(dev, flow);
+ rte_free(flow->fdir);
rte_free(flow);
}
struct rte_flow *flow;
flow = TAILQ_FIRST(list);
- mlx5_flow_list_destroy(dev, list, flow);
+ flow_list_destroy(dev, list, flow);
}
}
{
struct rte_flow *flow;
- TAILQ_FOREACH_REVERSE(flow, list, mlx5_flows, next)
+ TAILQ_FOREACH_REVERSE(flow, list, mlx5_flows, next) {
flow_drv_remove(dev, flow);
- mlx5_flow_rxq_flags_clear(dev);
+ flow_mreg_stop_copy_action(dev, flow);
+ }
+ flow_mreg_del_default_copy_action(dev);
+ flow_rxq_flags_clear(dev);
}
/**
struct rte_flow_error error;
int ret = 0;
+ /* Make sure default copy action (reg_c[0] -> reg_b) is created. */
+ ret = flow_mreg_add_default_copy_action(dev, &error);
+ if (ret < 0)
+ return -rte_errno;
+ /* Apply Flows created by application. */
TAILQ_FOREACH(flow, list, next) {
+ ret = flow_mreg_start_copy_action(dev, flow);
+ if (ret < 0)
+ goto error;
ret = flow_drv_apply(dev, flow, &error);
if (ret < 0)
goto error;
- mlx5_flow_rxq_flags_set(dev, flow);
+ flow_rxq_flags_set(dev, flow);
}
return 0;
error:
int
mlx5_flow_verify(struct rte_eth_dev *dev)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
struct rte_flow *flow;
int ret = 0;
return ret;
}
+/**
+ * Enable default hairpin egress flow.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param queue
+ * The queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_ctrl_flow_source_queue(struct rte_eth_dev *dev,
+ uint32_t queue)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ const struct rte_flow_attr attr = {
+ .egress = 1,
+ .priority = 0,
+ };
+ struct mlx5_rte_flow_item_tx_queue queue_spec = {
+ .queue = queue,
+ };
+ struct mlx5_rte_flow_item_tx_queue queue_mask = {
+ .queue = UINT32_MAX,
+ };
+ struct rte_flow_item items[] = {
+ {
+ .type = MLX5_RTE_FLOW_ITEM_TYPE_TX_QUEUE,
+ .spec = &queue_spec,
+ .last = NULL,
+ .mask = &queue_mask,
+ },
+ {
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ },
+ };
+ struct rte_flow_action_jump jump = {
+ .group = MLX5_HAIRPIN_TX_TABLE,
+ };
+ struct rte_flow_action actions[2];
+ struct rte_flow *flow;
+ struct rte_flow_error error;
+
+ actions[0].type = RTE_FLOW_ACTION_TYPE_JUMP;
+ actions[0].conf = &jump;
+ actions[1].type = RTE_FLOW_ACTION_TYPE_END;
+ flow = flow_list_create(dev, &priv->ctrl_flows,
+ &attr, items, actions, false, &error);
+ if (!flow) {
+ DRV_LOG(DEBUG,
+ "Failed to create ctrl flow: rte_errno(%d),"
+ " type(%d), message(%s)",
+ rte_errno, error.type,
+ error.message ? error.message : " (no stated reason)");
+ return -rte_errno;
+ }
+ return 0;
+}
+
/**
* Enable a control flow configured from the control plane.
*
struct rte_flow_item_vlan *vlan_spec,
struct rte_flow_item_vlan *vlan_mask)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
const struct rte_flow_attr attr = {
.ingress = 1,
.priority = MLX5_FLOW_PRIO_RSVD,
struct rte_flow_error error;
unsigned int i;
- if (!priv->reta_idx_n) {
- rte_errno = EINVAL;
- return -rte_errno;
+ if (!priv->reta_idx_n || !priv->rxqs_n) {
+ return 0;
}
for (i = 0; i != priv->reta_idx_n; ++i)
queue[i] = (*priv->reta_idx)[i];
- flow = mlx5_flow_list_create(dev, &priv->ctrl_flows, &attr, items,
- actions, &error);
+ flow = flow_list_create(dev, &priv->ctrl_flows,
+ &attr, items, actions, false, &error);
if (!flow)
return -rte_errno;
return 0;
struct rte_flow *flow,
struct rte_flow_error *error __rte_unused)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
- mlx5_flow_list_destroy(dev, &priv->flows, flow);
+ flow_list_destroy(dev, &priv->flows, flow);
return 0;
}
mlx5_flow_flush(struct rte_eth_dev *dev,
struct rte_flow_error *error __rte_unused)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
mlx5_flow_list_flush(dev, &priv->flows);
return 0;
int enable,
struct rte_flow_error *error)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
if (dev->data->dev_started) {
rte_flow_error_set(error, EBUSY,
}
/**
- * Query flow counter.
- *
- * @param flow
- * Pointer to the flow.
+ * Query a flow.
*
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
+ * @see rte_flow_query()
+ * @see rte_flow_ops
*/
static int
-mlx5_flow_query_count(struct rte_flow *flow __rte_unused,
- void *data __rte_unused,
- struct rte_flow_error *error)
-{
-#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
- if (flow->actions & MLX5_FLOW_ACTION_COUNT) {
- struct rte_flow_query_count *qc = data;
- uint64_t counters[2] = {0, 0};
- struct ibv_query_counter_set_attr query_cs_attr = {
- .cs = flow->counter->cs,
- .query_flags = IBV_COUNTER_SET_FORCE_UPDATE,
- };
- struct ibv_counter_set_data query_out = {
- .out = counters,
- .outlen = 2 * sizeof(uint64_t),
- };
- int err = mlx5_glue->query_counter_set(&query_cs_attr,
- &query_out);
+flow_drv_query(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ const struct rte_flow_action *actions,
+ void *data,
+ struct rte_flow_error *error)
+{
+ const struct mlx5_flow_driver_ops *fops;
+ enum mlx5_flow_drv_type ftype = flow->drv_type;
- if (err)
- return rte_flow_error_set
- (error, err,
- RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
- NULL,
- "cannot read counter");
- qc->hits_set = 1;
- qc->bytes_set = 1;
- qc->hits = counters[0] - flow->counter->hits;
- qc->bytes = counters[1] - flow->counter->bytes;
- if (qc->reset) {
- flow->counter->hits = counters[0];
- flow->counter->bytes = counters[1];
- }
- return 0;
- }
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
- NULL,
- "flow does not have counter");
-#endif
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
- NULL,
- "counters are not available");
+ assert(ftype > MLX5_FLOW_TYPE_MIN && ftype < MLX5_FLOW_TYPE_MAX);
+ fops = flow_get_drv_ops(ftype);
+
+ return fops->query(dev, flow, actions, data, error);
}
/**
- * Query a flows.
+ * Query a flow.
*
* @see rte_flow_query()
* @see rte_flow_ops
*/
int
-mlx5_flow_query(struct rte_eth_dev *dev __rte_unused,
+mlx5_flow_query(struct rte_eth_dev *dev,
struct rte_flow *flow,
const struct rte_flow_action *actions,
void *data,
struct rte_flow_error *error)
{
- int ret = 0;
+ int ret;
- for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
- switch (actions->type) {
- case RTE_FLOW_ACTION_TYPE_VOID:
- break;
- case RTE_FLOW_ACTION_TYPE_COUNT:
- ret = mlx5_flow_query_count(flow, data, error);
- break;
- default:
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- actions,
- "action not supported");
- }
- if (ret < 0)
- return ret;
- }
+ ret = flow_drv_query(dev, flow, actions, data, error);
+ if (ret < 0)
+ return ret;
return 0;
}
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-mlx5_fdir_filter_convert(struct rte_eth_dev *dev,
+flow_fdir_filter_convert(struct rte_eth_dev *dev,
const struct rte_eth_fdir_filter *fdir_filter,
struct mlx5_fdir *attributes)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
const struct rte_eth_fdir_input *input = &fdir_filter->input;
const struct rte_eth_fdir_masks *mask =
&dev->data->dev_conf.fdir_conf.mask;
case RTE_ETH_FLOW_NONFRAG_IPV4_UDP:
case RTE_ETH_FLOW_NONFRAG_IPV4_TCP:
case RTE_ETH_FLOW_NONFRAG_IPV4_OTHER:
- attributes->l3.ipv4.hdr = (struct ipv4_hdr){
+ attributes->l3.ipv4.hdr = (struct rte_ipv4_hdr){
.src_addr = input->flow.ip4_flow.src_ip,
.dst_addr = input->flow.ip4_flow.dst_ip,
.time_to_live = input->flow.ip4_flow.ttl,
.type_of_service = input->flow.ip4_flow.tos,
};
- attributes->l3_mask.ipv4.hdr = (struct ipv4_hdr){
+ attributes->l3_mask.ipv4.hdr = (struct rte_ipv4_hdr){
.src_addr = mask->ipv4_mask.src_ip,
.dst_addr = mask->ipv4_mask.dst_ip,
.time_to_live = mask->ipv4_mask.ttl,
case RTE_ETH_FLOW_NONFRAG_IPV6_UDP:
case RTE_ETH_FLOW_NONFRAG_IPV6_TCP:
case RTE_ETH_FLOW_NONFRAG_IPV6_OTHER:
- attributes->l3.ipv6.hdr = (struct ipv6_hdr){
+ attributes->l3.ipv6.hdr = (struct rte_ipv6_hdr){
.hop_limits = input->flow.ipv6_flow.hop_limits,
.proto = input->flow.ipv6_flow.proto,
};
/* Handle L4. */
switch (fdir_filter->input.flow_type) {
case RTE_ETH_FLOW_NONFRAG_IPV4_UDP:
- attributes->l4.udp.hdr = (struct udp_hdr){
+ attributes->l4.udp.hdr = (struct rte_udp_hdr){
.src_port = input->flow.udp4_flow.src_port,
.dst_port = input->flow.udp4_flow.dst_port,
};
- attributes->l4_mask.udp.hdr = (struct udp_hdr){
+ attributes->l4_mask.udp.hdr = (struct rte_udp_hdr){
.src_port = mask->src_port_mask,
.dst_port = mask->dst_port_mask,
};
};
break;
case RTE_ETH_FLOW_NONFRAG_IPV4_TCP:
- attributes->l4.tcp.hdr = (struct tcp_hdr){
+ attributes->l4.tcp.hdr = (struct rte_tcp_hdr){
.src_port = input->flow.tcp4_flow.src_port,
.dst_port = input->flow.tcp4_flow.dst_port,
};
- attributes->l4_mask.tcp.hdr = (struct tcp_hdr){
+ attributes->l4_mask.tcp.hdr = (struct rte_tcp_hdr){
.src_port = mask->src_port_mask,
.dst_port = mask->dst_port_mask,
};
};
break;
case RTE_ETH_FLOW_NONFRAG_IPV6_UDP:
- attributes->l4.udp.hdr = (struct udp_hdr){
+ attributes->l4.udp.hdr = (struct rte_udp_hdr){
.src_port = input->flow.udp6_flow.src_port,
.dst_port = input->flow.udp6_flow.dst_port,
};
- attributes->l4_mask.udp.hdr = (struct udp_hdr){
+ attributes->l4_mask.udp.hdr = (struct rte_udp_hdr){
.src_port = mask->src_port_mask,
.dst_port = mask->dst_port_mask,
};
};
break;
case RTE_ETH_FLOW_NONFRAG_IPV6_TCP:
- attributes->l4.tcp.hdr = (struct tcp_hdr){
+ attributes->l4.tcp.hdr = (struct rte_tcp_hdr){
.src_port = input->flow.tcp6_flow.src_port,
.dst_port = input->flow.tcp6_flow.dst_port,
};
- attributes->l4_mask.tcp.hdr = (struct tcp_hdr){
+ attributes->l4_mask.tcp.hdr = (struct rte_tcp_hdr){
.src_port = mask->src_port_mask,
.dst_port = mask->dst_port_mask,
};
return 0;
}
+#define FLOW_FDIR_CMP(f1, f2, fld) \
+ memcmp(&(f1)->fld, &(f2)->fld, sizeof(f1->fld))
+
+/**
+ * Compare two FDIR flows. If items and actions are identical, the two flows are
+ * regarded as same.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param f1
+ * FDIR flow to compare.
+ * @param f2
+ * FDIR flow to compare.
+ *
+ * @return
+ * Zero on match, 1 otherwise.
+ */
+static int
+flow_fdir_cmp(const struct mlx5_fdir *f1, const struct mlx5_fdir *f2)
+{
+ if (FLOW_FDIR_CMP(f1, f2, attr) ||
+ FLOW_FDIR_CMP(f1, f2, l2) ||
+ FLOW_FDIR_CMP(f1, f2, l2_mask) ||
+ FLOW_FDIR_CMP(f1, f2, l3) ||
+ FLOW_FDIR_CMP(f1, f2, l3_mask) ||
+ FLOW_FDIR_CMP(f1, f2, l4) ||
+ FLOW_FDIR_CMP(f1, f2, l4_mask) ||
+ FLOW_FDIR_CMP(f1, f2, actions[0].type))
+ return 1;
+ if (f1->actions[0].type == RTE_FLOW_ACTION_TYPE_QUEUE &&
+ FLOW_FDIR_CMP(f1, f2, queue))
+ return 1;
+ return 0;
+}
+
+/**
+ * Search device flow list to find out a matched FDIR flow.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param fdir_flow
+ * FDIR flow to lookup.
+ *
+ * @return
+ * Pointer of flow if found, NULL otherwise.
+ */
+static struct rte_flow *
+flow_fdir_filter_lookup(struct rte_eth_dev *dev, struct mlx5_fdir *fdir_flow)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct rte_flow *flow = NULL;
+
+ assert(fdir_flow);
+ TAILQ_FOREACH(flow, &priv->flows, next) {
+ if (flow->fdir && !flow_fdir_cmp(flow->fdir, fdir_flow)) {
+ DRV_LOG(DEBUG, "port %u found FDIR flow %p",
+ dev->data->port_id, (void *)flow);
+ break;
+ }
+ }
+ return flow;
+}
+
/**
* Add new flow director filter and store it in list.
*
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-mlx5_fdir_filter_add(struct rte_eth_dev *dev,
+flow_fdir_filter_add(struct rte_eth_dev *dev,
const struct rte_eth_fdir_filter *fdir_filter)
{
- struct priv *priv = dev->data->dev_private;
- struct mlx5_fdir attributes = {
- .attr.group = 0,
- .l2_mask = {
- .dst.addr_bytes = "\x00\x00\x00\x00\x00\x00",
- .src.addr_bytes = "\x00\x00\x00\x00\x00\x00",
- .type = 0,
- },
- };
- struct rte_flow_error error;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_fdir *fdir_flow;
struct rte_flow *flow;
int ret;
- ret = mlx5_fdir_filter_convert(dev, fdir_filter, &attributes);
+ fdir_flow = rte_zmalloc(__func__, sizeof(*fdir_flow), 0);
+ if (!fdir_flow) {
+ rte_errno = ENOMEM;
+ return -rte_errno;
+ }
+ ret = flow_fdir_filter_convert(dev, fdir_filter, fdir_flow);
if (ret)
- return ret;
- flow = mlx5_flow_list_create(dev, &priv->flows, &attributes.attr,
- attributes.items, attributes.actions,
- &error);
+ goto error;
+ flow = flow_fdir_filter_lookup(dev, fdir_flow);
if (flow) {
- DRV_LOG(DEBUG, "port %u FDIR created %p", dev->data->port_id,
- (void *)flow);
- return 0;
+ rte_errno = EEXIST;
+ goto error;
}
+ flow = flow_list_create(dev, &priv->flows, &fdir_flow->attr,
+ fdir_flow->items, fdir_flow->actions, true,
+ NULL);
+ if (!flow)
+ goto error;
+ assert(!flow->fdir);
+ flow->fdir = fdir_flow;
+ DRV_LOG(DEBUG, "port %u created FDIR flow %p",
+ dev->data->port_id, (void *)flow);
+ return 0;
+error:
+ rte_free(fdir_flow);
return -rte_errno;
}
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-mlx5_fdir_filter_delete(struct rte_eth_dev *dev __rte_unused,
- const struct rte_eth_fdir_filter *fdir_filter
- __rte_unused)
+flow_fdir_filter_delete(struct rte_eth_dev *dev,
+ const struct rte_eth_fdir_filter *fdir_filter)
{
- rte_errno = ENOTSUP;
- return -rte_errno;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct rte_flow *flow;
+ struct mlx5_fdir fdir_flow = {
+ .attr.group = 0,
+ };
+ int ret;
+
+ ret = flow_fdir_filter_convert(dev, fdir_filter, &fdir_flow);
+ if (ret)
+ return -rte_errno;
+ flow = flow_fdir_filter_lookup(dev, &fdir_flow);
+ if (!flow) {
+ rte_errno = ENOENT;
+ return -rte_errno;
+ }
+ flow_list_destroy(dev, &priv->flows, flow);
+ DRV_LOG(DEBUG, "port %u deleted FDIR flow %p",
+ dev->data->port_id, (void *)flow);
+ return 0;
}
/**
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-mlx5_fdir_filter_update(struct rte_eth_dev *dev,
+flow_fdir_filter_update(struct rte_eth_dev *dev,
const struct rte_eth_fdir_filter *fdir_filter)
{
int ret;
- ret = mlx5_fdir_filter_delete(dev, fdir_filter);
+ ret = flow_fdir_filter_delete(dev, fdir_filter);
if (ret)
return ret;
- return mlx5_fdir_filter_add(dev, fdir_filter);
+ return flow_fdir_filter_add(dev, fdir_filter);
}
/**
* Pointer to Ethernet device.
*/
static void
-mlx5_fdir_filter_flush(struct rte_eth_dev *dev)
+flow_fdir_filter_flush(struct rte_eth_dev *dev)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
mlx5_flow_list_flush(dev, &priv->flows);
}
* Resulting flow director information.
*/
static void
-mlx5_fdir_info_get(struct rte_eth_dev *dev, struct rte_eth_fdir_info *fdir_info)
+flow_fdir_info_get(struct rte_eth_dev *dev, struct rte_eth_fdir_info *fdir_info)
{
struct rte_eth_fdir_masks *mask =
&dev->data->dev_conf.fdir_conf.mask;
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-mlx5_fdir_ctrl_func(struct rte_eth_dev *dev, enum rte_filter_op filter_op,
+flow_fdir_ctrl_func(struct rte_eth_dev *dev, enum rte_filter_op filter_op,
void *arg)
{
enum rte_fdir_mode fdir_mode =
}
switch (filter_op) {
case RTE_ETH_FILTER_ADD:
- return mlx5_fdir_filter_add(dev, arg);
+ return flow_fdir_filter_add(dev, arg);
case RTE_ETH_FILTER_UPDATE:
- return mlx5_fdir_filter_update(dev, arg);
+ return flow_fdir_filter_update(dev, arg);
case RTE_ETH_FILTER_DELETE:
- return mlx5_fdir_filter_delete(dev, arg);
+ return flow_fdir_filter_delete(dev, arg);
case RTE_ETH_FILTER_FLUSH:
- mlx5_fdir_filter_flush(dev);
+ flow_fdir_filter_flush(dev);
break;
case RTE_ETH_FILTER_INFO:
- mlx5_fdir_info_get(dev, arg);
+ flow_fdir_info_get(dev, arg);
break;
default:
DRV_LOG(DEBUG, "port %u unknown operation %u",
*(const void **)arg = &mlx5_flow_ops;
return 0;
case RTE_ETH_FILTER_FDIR:
- return mlx5_fdir_ctrl_func(dev, filter_op, arg);
+ return flow_fdir_ctrl_func(dev, filter_op, arg);
default:
DRV_LOG(ERR, "port %u filter type (%d) not supported",
dev->data->port_id, filter_type);
}
return 0;
}
+
+/**
+ * Create the needed meter and suffix tables.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ *
+ * @return
+ * Pointer to table set on success, NULL otherwise.
+ */
+struct mlx5_meter_domains_infos *
+mlx5_flow_create_mtr_tbls(struct rte_eth_dev *dev)
+{
+ const struct mlx5_flow_driver_ops *fops;
+
+ fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
+ return fops->create_mtr_tbls(dev);
+}
+
+/**
+ * Destroy the meter table set.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ * @param[in] tbl
+ * Pointer to the meter table set.
+ *
+ * @return
+ * 0 on success.
+ */
+int
+mlx5_flow_destroy_mtr_tbls(struct rte_eth_dev *dev,
+ struct mlx5_meter_domains_infos *tbls)
+{
+ const struct mlx5_flow_driver_ops *fops;
+
+ fops = flow_get_drv_ops(MLX5_FLOW_TYPE_DV);
+ return fops->destroy_mtr_tbls(dev, tbls);
+}
+
+#define MLX5_POOL_QUERY_FREQ_US 1000000
+
+/**
+ * Set the periodic procedure for triggering asynchronous batch queries for all
+ * the counter pools.
+ *
+ * @param[in] sh
+ * Pointer to mlx5_ibv_shared object.
+ */
+void
+mlx5_set_query_alarm(struct mlx5_ibv_shared *sh)
+{
+ struct mlx5_pools_container *cont = MLX5_CNT_CONTAINER(sh, 0, 0);
+ uint32_t pools_n = rte_atomic16_read(&cont->n_valid);
+ uint32_t us;
+
+ cont = MLX5_CNT_CONTAINER(sh, 1, 0);
+ pools_n += rte_atomic16_read(&cont->n_valid);
+ us = MLX5_POOL_QUERY_FREQ_US / pools_n;
+ DRV_LOG(DEBUG, "Set alarm for %u pools each %u us", pools_n, us);
+ if (rte_eal_alarm_set(us, mlx5_flow_query_alarm, sh)) {
+ sh->cmng.query_thread_on = 0;
+ DRV_LOG(ERR, "Cannot reinitialize query alarm");
+ } else {
+ sh->cmng.query_thread_on = 1;
+ }
+}
+
+/**
+ * The periodic procedure for triggering asynchronous batch queries for all the
+ * counter pools. This function is probably called by the host thread.
+ *
+ * @param[in] arg
+ * The parameter for the alarm process.
+ */
+void
+mlx5_flow_query_alarm(void *arg)
+{
+ struct mlx5_ibv_shared *sh = arg;
+ struct mlx5_devx_obj *dcs;
+ uint16_t offset;
+ int ret;
+ uint8_t batch = sh->cmng.batch;
+ uint16_t pool_index = sh->cmng.pool_index;
+ struct mlx5_pools_container *cont;
+ struct mlx5_pools_container *mcont;
+ struct mlx5_flow_counter_pool *pool;
+
+ if (sh->cmng.pending_queries >= MLX5_MAX_PENDING_QUERIES)
+ goto set_alarm;
+next_container:
+ cont = MLX5_CNT_CONTAINER(sh, batch, 1);
+ mcont = MLX5_CNT_CONTAINER(sh, batch, 0);
+ /* Check if resize was done and need to flip a container. */
+ if (cont != mcont) {
+ if (cont->pools) {
+ /* Clean the old container. */
+ rte_free(cont->pools);
+ memset(cont, 0, sizeof(*cont));
+ }
+ rte_cio_wmb();
+ /* Flip the host container. */
+ sh->cmng.mhi[batch] ^= (uint8_t)2;
+ cont = mcont;
+ }
+ if (!cont->pools) {
+ /* 2 empty containers case is unexpected. */
+ if (unlikely(batch != sh->cmng.batch))
+ goto set_alarm;
+ batch ^= 0x1;
+ pool_index = 0;
+ goto next_container;
+ }
+ pool = cont->pools[pool_index];
+ if (pool->raw_hw)
+ /* There is a pool query in progress. */
+ goto set_alarm;
+ pool->raw_hw =
+ LIST_FIRST(&sh->cmng.free_stat_raws);
+ if (!pool->raw_hw)
+ /* No free counter statistics raw memory. */
+ goto set_alarm;
+ dcs = (struct mlx5_devx_obj *)(uintptr_t)rte_atomic64_read
+ (&pool->a64_dcs);
+ offset = batch ? 0 : dcs->id % MLX5_COUNTERS_PER_POOL;
+ ret = mlx5_devx_cmd_flow_counter_query(dcs, 0, MLX5_COUNTERS_PER_POOL -
+ offset, NULL, NULL,
+ pool->raw_hw->mem_mng->dm->id,
+ (void *)(uintptr_t)
+ (pool->raw_hw->data + offset),
+ sh->devx_comp,
+ (uint64_t)(uintptr_t)pool);
+ if (ret) {
+ DRV_LOG(ERR, "Failed to trigger asynchronous query for dcs ID"
+ " %d", pool->min_dcs->id);
+ pool->raw_hw = NULL;
+ goto set_alarm;
+ }
+ pool->raw_hw->min_dcs_id = dcs->id;
+ LIST_REMOVE(pool->raw_hw, next);
+ sh->cmng.pending_queries++;
+ pool_index++;
+ if (pool_index >= rte_atomic16_read(&cont->n_valid)) {
+ batch ^= 0x1;
+ pool_index = 0;
+ }
+set_alarm:
+ sh->cmng.batch = batch;
+ sh->cmng.pool_index = pool_index;
+ mlx5_set_query_alarm(sh);
+}
+
+/**
+ * Handler for the HW respond about ready values from an asynchronous batch
+ * query. This function is probably called by the host thread.
+ *
+ * @param[in] sh
+ * The pointer to the shared IB device context.
+ * @param[in] async_id
+ * The Devx async ID.
+ * @param[in] status
+ * The status of the completion.
+ */
+void
+mlx5_flow_async_pool_query_handle(struct mlx5_ibv_shared *sh,
+ uint64_t async_id, int status)
+{
+ struct mlx5_flow_counter_pool *pool =
+ (struct mlx5_flow_counter_pool *)(uintptr_t)async_id;
+ struct mlx5_counter_stats_raw *raw_to_free;
+
+ if (unlikely(status)) {
+ raw_to_free = pool->raw_hw;
+ } else {
+ raw_to_free = pool->raw;
+ rte_spinlock_lock(&pool->sl);
+ pool->raw = pool->raw_hw;
+ rte_spinlock_unlock(&pool->sl);
+ rte_atomic64_add(&pool->query_gen, 1);
+ /* Be sure the new raw counters data is updated in memory. */
+ rte_cio_wmb();
+ }
+ LIST_INSERT_HEAD(&sh->cmng.free_stat_raws, raw_to_free, next);
+ pool->raw_hw = NULL;
+ sh->cmng.pending_queries--;
+}
+
+/**
+ * Translate the rte_flow group index to HW table value.
+ *
+ * @param[in] attributes
+ * Pointer to flow attributes
+ * @param[in] external
+ * Value is part of flow rule created by request external to PMD.
+ * @param[in] group
+ * rte_flow group index value.
+ * @param[out] table
+ * HW table value.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_group_to_table(const struct rte_flow_attr *attributes, bool external,
+ uint32_t group, uint32_t *table,
+ struct rte_flow_error *error)
+{
+ if (attributes->transfer && external) {
+ if (group == UINT32_MAX)
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
+ NULL,
+ "group index not supported");
+ *table = group + 1;
+ } else {
+ *table = group;
+ }
+ return 0;
+}
+
+/**
+ * Discover availability of metadata reg_c's.
+ *
+ * Iteratively use test flows to check availability.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_discover_mreg_c(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *config = &priv->config;
+ enum modify_reg idx;
+ int n = 0;
+
+ /* reg_c[0] and reg_c[1] are reserved. */
+ config->flow_mreg_c[n++] = REG_C_0;
+ config->flow_mreg_c[n++] = REG_C_1;
+ /* Discover availability of other reg_c's. */
+ for (idx = REG_C_2; idx <= REG_C_7; ++idx) {
+ struct rte_flow_attr attr = {
+ .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
+ .priority = MLX5_FLOW_PRIO_RSVD,
+ .ingress = 1,
+ };
+ struct rte_flow_item items[] = {
+ [0] = {
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ },
+ };
+ struct rte_flow_action actions[] = {
+ [0] = {
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
+ .conf = &(struct mlx5_flow_action_copy_mreg){
+ .src = REG_C_1,
+ .dst = idx,
+ },
+ },
+ [1] = {
+ .type = RTE_FLOW_ACTION_TYPE_JUMP,
+ .conf = &(struct rte_flow_action_jump){
+ .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
+ },
+ },
+ [2] = {
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ },
+ };
+ struct rte_flow *flow;
+ struct rte_flow_error error;
+
+ if (!config->dv_flow_en)
+ break;
+ /* Create internal flow, validation skips copy action. */
+ flow = flow_list_create(dev, NULL, &attr, items,
+ actions, false, &error);
+ if (!flow)
+ continue;
+ if (dev->data->dev_started || !flow_drv_apply(dev, flow, NULL))
+ config->flow_mreg_c[n++] = idx;
+ flow_list_destroy(dev, NULL, flow);
+ }
+ for (; n < MLX5_MREG_C_NUM; ++n)
+ config->flow_mreg_c[n] = REG_NONE;
+ return 0;
+}