-/*-
- * BSD LICENSE
- *
- * Copyright 2016 6WIND S.A.
- * Copyright 2016 Mellanox.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of 6WIND S.A. nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2016 6WIND S.A.
+ * Copyright 2016 Mellanox Technologies, Ltd
*/
#include <sys/queue.h>
+#include <stdint.h>
#include <string.h>
/* Verbs header. */
#pragma GCC diagnostic error "-Wpedantic"
#endif
-#include <rte_ethdev.h>
+#include <rte_common.h>
+#include <rte_ether.h>
+#include <rte_eth_ctrl.h>
+#include <rte_ethdev_driver.h>
#include <rte_flow.h>
#include <rte_flow_driver.h>
#include <rte_malloc.h>
+#include <rte_ip.h>
#include "mlx5.h"
+#include "mlx5_defs.h"
#include "mlx5_prm.h"
+#include "mlx5_glue.h"
+
+/* Dev ops structure defined in mlx5.c */
+extern const struct eth_dev_ops mlx5_dev_ops;
+extern const struct eth_dev_ops mlx5_dev_ops_isolate;
+
+/* Pattern outer Layer bits. */
+#define MLX5_FLOW_LAYER_OUTER_L2 (1u << 0)
+#define MLX5_FLOW_LAYER_OUTER_L3_IPV4 (1u << 1)
+#define MLX5_FLOW_LAYER_OUTER_L3_IPV6 (1u << 2)
+#define MLX5_FLOW_LAYER_OUTER_L4_UDP (1u << 3)
+#define MLX5_FLOW_LAYER_OUTER_L4_TCP (1u << 4)
+#define MLX5_FLOW_LAYER_OUTER_VLAN (1u << 5)
+
+/* Pattern inner Layer bits. */
+#define MLX5_FLOW_LAYER_INNER_L2 (1u << 6)
+#define MLX5_FLOW_LAYER_INNER_L3_IPV4 (1u << 7)
+#define MLX5_FLOW_LAYER_INNER_L3_IPV6 (1u << 8)
+#define MLX5_FLOW_LAYER_INNER_L4_UDP (1u << 9)
+#define MLX5_FLOW_LAYER_INNER_L4_TCP (1u << 10)
+#define MLX5_FLOW_LAYER_INNER_VLAN (1u << 11)
+
+/* Pattern tunnel Layer bits. */
+#define MLX5_FLOW_LAYER_VXLAN (1u << 12)
+#define MLX5_FLOW_LAYER_VXLAN_GPE (1u << 13)
+#define MLX5_FLOW_LAYER_GRE (1u << 14)
+#define MLX5_FLOW_LAYER_MPLS (1u << 15)
+
+/* Outer Masks. */
+#define MLX5_FLOW_LAYER_OUTER_L3 \
+ (MLX5_FLOW_LAYER_OUTER_L3_IPV4 | MLX5_FLOW_LAYER_OUTER_L3_IPV6)
+#define MLX5_FLOW_LAYER_OUTER_L4 \
+ (MLX5_FLOW_LAYER_OUTER_L4_UDP | MLX5_FLOW_LAYER_OUTER_L4_TCP)
+#define MLX5_FLOW_LAYER_OUTER \
+ (MLX5_FLOW_LAYER_OUTER_L2 | MLX5_FLOW_LAYER_OUTER_L3 | \
+ MLX5_FLOW_LAYER_OUTER_L4)
+
+/* Tunnel Masks. */
+#define MLX5_FLOW_LAYER_TUNNEL \
+ (MLX5_FLOW_LAYER_VXLAN | MLX5_FLOW_LAYER_VXLAN_GPE | \
+ MLX5_FLOW_LAYER_GRE | MLX5_FLOW_LAYER_MPLS)
+
+/* Inner Masks. */
+#define MLX5_FLOW_LAYER_INNER_L3 \
+ (MLX5_FLOW_LAYER_INNER_L3_IPV4 | MLX5_FLOW_LAYER_INNER_L3_IPV6)
+#define MLX5_FLOW_LAYER_INNER_L4 \
+ (MLX5_FLOW_LAYER_INNER_L4_UDP | MLX5_FLOW_LAYER_INNER_L4_TCP)
+#define MLX5_FLOW_LAYER_INNER \
+ (MLX5_FLOW_LAYER_INNER_L2 | MLX5_FLOW_LAYER_INNER_L3 | \
+ MLX5_FLOW_LAYER_INNER_L4)
+
+/* Actions that modify the fate of matching traffic. */
+#define MLX5_FLOW_FATE_DROP (1u << 0)
+#define MLX5_FLOW_FATE_QUEUE (1u << 1)
+#define MLX5_FLOW_FATE_RSS (1u << 2)
+
+/* Modify a packet. */
+#define MLX5_FLOW_MOD_FLAG (1u << 0)
+#define MLX5_FLOW_MOD_MARK (1u << 1)
+#define MLX5_FLOW_MOD_COUNT (1u << 2)
+
+/* possible L3 layers protocols filtering. */
+#define MLX5_IP_PROTOCOL_TCP 6
+#define MLX5_IP_PROTOCOL_UDP 17
+#define MLX5_IP_PROTOCOL_GRE 47
+#define MLX5_IP_PROTOCOL_MPLS 147
+
+/* Priority reserved for default flows. */
+#define MLX5_FLOW_PRIO_RSVD ((uint32_t)-1)
+
+enum mlx5_expansion {
+ MLX5_EXPANSION_ROOT,
+ MLX5_EXPANSION_ROOT_OUTER,
+ MLX5_EXPANSION_OUTER_ETH,
+ MLX5_EXPANSION_OUTER_IPV4,
+ MLX5_EXPANSION_OUTER_IPV4_UDP,
+ MLX5_EXPANSION_OUTER_IPV4_TCP,
+ MLX5_EXPANSION_OUTER_IPV6,
+ MLX5_EXPANSION_OUTER_IPV6_UDP,
+ MLX5_EXPANSION_OUTER_IPV6_TCP,
+ MLX5_EXPANSION_VXLAN,
+ MLX5_EXPANSION_VXLAN_GPE,
+ MLX5_EXPANSION_GRE,
+ MLX5_EXPANSION_MPLS,
+ MLX5_EXPANSION_ETH,
+ MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV4_UDP,
+ MLX5_EXPANSION_IPV4_TCP,
+ MLX5_EXPANSION_IPV6,
+ MLX5_EXPANSION_IPV6_UDP,
+ MLX5_EXPANSION_IPV6_TCP,
+};
-/* Number of Work Queue necessary for the DROP queue. */
-#define MLX5_DROP_WQ_N 4
-
-static int
-mlx5_flow_create_eth(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
+/** Supported expansion of items. */
+static const struct rte_flow_expand_node mlx5_support_expansion[] = {
+ [MLX5_EXPANSION_ROOT] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH,
+ MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV6),
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ },
+ [MLX5_EXPANSION_ROOT_OUTER] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_ETH,
+ MLX5_EXPANSION_OUTER_IPV4,
+ MLX5_EXPANSION_OUTER_IPV6),
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ },
+ [MLX5_EXPANSION_OUTER_ETH] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_IPV4,
+ MLX5_EXPANSION_OUTER_IPV6,
+ MLX5_EXPANSION_MPLS),
+ .type = RTE_FLOW_ITEM_TYPE_ETH,
+ .rss_types = 0,
+ },
+ [MLX5_EXPANSION_OUTER_IPV4] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT
+ (MLX5_EXPANSION_OUTER_IPV4_UDP,
+ MLX5_EXPANSION_OUTER_IPV4_TCP,
+ MLX5_EXPANSION_GRE),
+ .type = RTE_FLOW_ITEM_TYPE_IPV4,
+ .rss_types = ETH_RSS_IPV4 | ETH_RSS_FRAG_IPV4 |
+ ETH_RSS_NONFRAG_IPV4_OTHER,
+ },
+ [MLX5_EXPANSION_OUTER_IPV4_UDP] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN,
+ MLX5_EXPANSION_VXLAN_GPE),
+ .type = RTE_FLOW_ITEM_TYPE_UDP,
+ .rss_types = ETH_RSS_NONFRAG_IPV4_UDP,
+ },
+ [MLX5_EXPANSION_OUTER_IPV4_TCP] = {
+ .type = RTE_FLOW_ITEM_TYPE_TCP,
+ .rss_types = ETH_RSS_NONFRAG_IPV4_TCP,
+ },
+ [MLX5_EXPANSION_OUTER_IPV6] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT
+ (MLX5_EXPANSION_OUTER_IPV6_UDP,
+ MLX5_EXPANSION_OUTER_IPV6_TCP),
+ .type = RTE_FLOW_ITEM_TYPE_IPV6,
+ .rss_types = ETH_RSS_IPV6 | ETH_RSS_FRAG_IPV6 |
+ ETH_RSS_NONFRAG_IPV6_OTHER,
+ },
+ [MLX5_EXPANSION_OUTER_IPV6_UDP] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN,
+ MLX5_EXPANSION_VXLAN_GPE),
+ .type = RTE_FLOW_ITEM_TYPE_UDP,
+ .rss_types = ETH_RSS_NONFRAG_IPV6_UDP,
+ },
+ [MLX5_EXPANSION_OUTER_IPV6_TCP] = {
+ .type = RTE_FLOW_ITEM_TYPE_TCP,
+ .rss_types = ETH_RSS_NONFRAG_IPV6_TCP,
+ },
+ [MLX5_EXPANSION_VXLAN] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH),
+ .type = RTE_FLOW_ITEM_TYPE_VXLAN,
+ },
+ [MLX5_EXPANSION_VXLAN_GPE] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH,
+ MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV6),
+ .type = RTE_FLOW_ITEM_TYPE_VXLAN_GPE,
+ },
+ [MLX5_EXPANSION_GRE] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4),
+ .type = RTE_FLOW_ITEM_TYPE_GRE,
+ },
+ [MLX5_EXPANSION_MPLS] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV6),
+ .type = RTE_FLOW_ITEM_TYPE_MPLS,
+ },
+ [MLX5_EXPANSION_ETH] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV6),
+ .type = RTE_FLOW_ITEM_TYPE_ETH,
+ },
+ [MLX5_EXPANSION_IPV4] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4_UDP,
+ MLX5_EXPANSION_IPV4_TCP),
+ .type = RTE_FLOW_ITEM_TYPE_IPV4,
+ .rss_types = ETH_RSS_IPV4 | ETH_RSS_FRAG_IPV4 |
+ ETH_RSS_NONFRAG_IPV4_OTHER,
+ },
+ [MLX5_EXPANSION_IPV4_UDP] = {
+ .type = RTE_FLOW_ITEM_TYPE_UDP,
+ .rss_types = ETH_RSS_NONFRAG_IPV4_UDP,
+ },
+ [MLX5_EXPANSION_IPV4_TCP] = {
+ .type = RTE_FLOW_ITEM_TYPE_TCP,
+ .rss_types = ETH_RSS_NONFRAG_IPV4_TCP,
+ },
+ [MLX5_EXPANSION_IPV6] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV6_UDP,
+ MLX5_EXPANSION_IPV6_TCP),
+ .type = RTE_FLOW_ITEM_TYPE_IPV6,
+ .rss_types = ETH_RSS_IPV6 | ETH_RSS_FRAG_IPV6 |
+ ETH_RSS_NONFRAG_IPV6_OTHER,
+ },
+ [MLX5_EXPANSION_IPV6_UDP] = {
+ .type = RTE_FLOW_ITEM_TYPE_UDP,
+ .rss_types = ETH_RSS_NONFRAG_IPV6_UDP,
+ },
+ [MLX5_EXPANSION_IPV6_TCP] = {
+ .type = RTE_FLOW_ITEM_TYPE_TCP,
+ .rss_types = ETH_RSS_NONFRAG_IPV6_TCP,
+ },
+};
-static int
-mlx5_flow_create_vlan(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
+/** Handles information leading to a drop fate. */
+struct mlx5_flow_verbs {
+ LIST_ENTRY(mlx5_flow_verbs) next;
+ unsigned int size; /**< Size of the attribute. */
+ struct {
+ struct ibv_flow_attr *attr;
+ /**< Pointer to the Specification buffer. */
+ uint8_t *specs; /**< Pointer to the specifications. */
+ };
+ struct ibv_flow *flow; /**< Verbs flow pointer. */
+ struct mlx5_hrxq *hrxq; /**< Hash Rx queue object. */
+ uint64_t hash_fields; /**< Verbs hash Rx queue hash fields. */
+};
-static int
-mlx5_flow_create_ipv4(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
+/* Counters information. */
+struct mlx5_flow_counter {
+ LIST_ENTRY(mlx5_flow_counter) next; /**< Pointer to the next counter. */
+ uint32_t shared:1; /**< Share counter ID with other flow rules. */
+ uint32_t ref_cnt:31; /**< Reference counter. */
+ uint32_t id; /**< Counter ID. */
+ struct ibv_counter_set *cs; /**< Holds the counters for the rule. */
+ uint64_t hits; /**< Number of packets matched by the rule. */
+ uint64_t bytes; /**< Number of bytes matched by the rule. */
+};
-static int
-mlx5_flow_create_ipv6(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
+/* Flow structure. */
+struct rte_flow {
+ TAILQ_ENTRY(rte_flow) next; /**< Pointer to the next flow structure. */
+ struct rte_flow_attr attributes; /**< User flow attribute. */
+ uint32_t l3_protocol_en:1; /**< Protocol filtering requested. */
+ uint32_t layers;
+ /**< Bit-fields of present layers see MLX5_FLOW_LAYER_*. */
+ uint32_t modifier;
+ /**< Bit-fields of present modifier see MLX5_FLOW_MOD_*. */
+ uint32_t fate;
+ /**< Bit-fields of present fate see MLX5_FLOW_FATE_*. */
+ uint8_t l3_protocol; /**< valid when l3_protocol_en is set. */
+ LIST_HEAD(verbs, mlx5_flow_verbs) verbs; /**< Verbs flows list. */
+ struct mlx5_flow_verbs *cur_verbs;
+ /**< Current Verbs flow structure being filled. */
+ struct mlx5_flow_counter *counter; /**< Holds Verbs flow counter. */
+ struct rte_flow_action_rss rss;/**< RSS context. */
+ uint8_t key[MLX5_RSS_HASH_KEY_LEN]; /**< RSS hash key. */
+ uint16_t (*queue)[]; /**< Destination queues to redirect traffic to. */
+};
-static int
-mlx5_flow_create_udp(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
+static const struct rte_flow_ops mlx5_flow_ops = {
+ .validate = mlx5_flow_validate,
+ .create = mlx5_flow_create,
+ .destroy = mlx5_flow_destroy,
+ .flush = mlx5_flow_flush,
+ .isolate = mlx5_flow_isolate,
+ .query = mlx5_flow_query,
+};
-static int
-mlx5_flow_create_tcp(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
+/* Convert FDIR request to Generic flow. */
+struct mlx5_fdir {
+ struct rte_flow_attr attr;
+ struct rte_flow_action actions[2];
+ struct rte_flow_item items[4];
+ struct rte_flow_item_eth l2;
+ struct rte_flow_item_eth l2_mask;
+ union {
+ struct rte_flow_item_ipv4 ipv4;
+ struct rte_flow_item_ipv6 ipv6;
+ } l3;
+ union {
+ struct rte_flow_item_ipv4 ipv4;
+ struct rte_flow_item_ipv6 ipv6;
+ } l3_mask;
+ union {
+ struct rte_flow_item_udp udp;
+ struct rte_flow_item_tcp tcp;
+ } l4;
+ union {
+ struct rte_flow_item_udp udp;
+ struct rte_flow_item_tcp tcp;
+ } l4_mask;
+ struct rte_flow_action_queue queue;
+};
-static int
-mlx5_flow_create_vxlan(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
+/* Verbs specification header. */
+struct ibv_spec_header {
+ enum ibv_flow_spec_type type;
+ uint16_t size;
+};
-struct rte_flow {
- LIST_ENTRY(rte_flow) next; /**< Pointer to the next flow structure. */
- struct ibv_exp_flow_attr *ibv_attr; /**< Pointer to Verbs attributes. */
- struct ibv_exp_rwq_ind_table *ind_table; /**< Indirection table. */
- struct ibv_qp *qp; /**< Verbs queue pair. */
- struct ibv_exp_flow *ibv_flow; /**< Verbs flow. */
- struct ibv_exp_wq *wq; /**< Verbs work queue. */
- struct ibv_cq *cq; /**< Verbs completion queue. */
- uint16_t rxqs_n; /**< Number of queues in this flow, 0 if drop queue. */
- uint32_t mark:1; /**< Set if the flow is marked. */
- uint32_t drop:1; /**< Drop queue. */
- uint64_t hash_fields; /**< Fields that participate in the hash. */
- struct rxq *rxqs[]; /**< Pointer to the queues array. */
+/*
+ * Number of sub priorities.
+ * For each kind of pattern matching i.e. L2, L3, L4 to have a correct
+ * matching on the NIC (firmware dependent) L4 most have the higher priority
+ * followed by L3 and ending with L2.
+ */
+#define MLX5_PRIORITY_MAP_L2 2
+#define MLX5_PRIORITY_MAP_L3 1
+#define MLX5_PRIORITY_MAP_L4 0
+#define MLX5_PRIORITY_MAP_MAX 3
+
+/* Map of Verbs to Flow priority with 8 Verbs priorities. */
+static const uint32_t priority_map_3[][MLX5_PRIORITY_MAP_MAX] = {
+ { 0, 1, 2 }, { 2, 3, 4 }, { 5, 6, 7 },
};
-/** Static initializer for items. */
-#define ITEMS(...) \
- (const enum rte_flow_item_type []){ \
- __VA_ARGS__, RTE_FLOW_ITEM_TYPE_END, \
- }
-
-/** Structure to generate a simple graph of layers supported by the NIC. */
-struct mlx5_flow_items {
- /** List of possible actions for these items. */
- const enum rte_flow_action_type *const actions;
- /** Bit-masks corresponding to the possibilities for the item. */
- const void *mask;
- /**
- * Default bit-masks to use when item->mask is not provided. When
- * \default_mask is also NULL, the full supported bit-mask (\mask) is
- * used instead.
- */
- const void *default_mask;
- /** Bit-masks size in bytes. */
- const unsigned int mask_sz;
- /**
- * Conversion function from rte_flow to NIC specific flow.
- *
- * @param item
- * rte_flow item to convert.
- * @param default_mask
- * Default bit-masks to use when item->mask is not provided.
- * @param data
- * Internal structure to store the conversion.
- *
- * @return
- * 0 on success, negative value otherwise.
- */
- int (*convert)(const struct rte_flow_item *item,
- const void *default_mask,
- void *data);
- /** Size in bytes of the destination structure. */
- const unsigned int dst_sz;
- /** List of possible following items. */
- const enum rte_flow_item_type *const items;
+/* Map of Verbs to Flow priority with 16 Verbs priorities. */
+static const uint32_t priority_map_5[][MLX5_PRIORITY_MAP_MAX] = {
+ { 0, 1, 2 }, { 3, 4, 5 }, { 6, 7, 8 },
+ { 9, 10, 11 }, { 12, 13, 14 },
};
-/** Valid action for this PMD. */
-static const enum rte_flow_action_type valid_actions[] = {
- RTE_FLOW_ACTION_TYPE_DROP,
- RTE_FLOW_ACTION_TYPE_QUEUE,
- RTE_FLOW_ACTION_TYPE_MARK,
- RTE_FLOW_ACTION_TYPE_FLAG,
- RTE_FLOW_ACTION_TYPE_END,
+/* Tunnel information. */
+struct mlx5_flow_tunnel_info {
+ uint32_t tunnel; /**< Tunnel bit (see MLX5_FLOW_*). */
+ uint32_t ptype; /**< Tunnel Ptype (see RTE_PTYPE_*). */
};
-/** Graph of supported items and associated actions. */
-static const struct mlx5_flow_items mlx5_flow_items[] = {
- [RTE_FLOW_ITEM_TYPE_END] = {
- .items = ITEMS(RTE_FLOW_ITEM_TYPE_ETH,
- RTE_FLOW_ITEM_TYPE_VXLAN),
+static struct mlx5_flow_tunnel_info tunnels_info[] = {
+ {
+ .tunnel = MLX5_FLOW_LAYER_VXLAN,
+ .ptype = RTE_PTYPE_TUNNEL_VXLAN | RTE_PTYPE_L4_UDP,
},
- [RTE_FLOW_ITEM_TYPE_ETH] = {
- .items = ITEMS(RTE_FLOW_ITEM_TYPE_VLAN,
- RTE_FLOW_ITEM_TYPE_IPV4,
- RTE_FLOW_ITEM_TYPE_IPV6),
- .actions = valid_actions,
- .mask = &(const struct rte_flow_item_eth){
- .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
- .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
- .type = -1,
- },
- .default_mask = &rte_flow_item_eth_mask,
- .mask_sz = sizeof(struct rte_flow_item_eth),
- .convert = mlx5_flow_create_eth,
- .dst_sz = sizeof(struct ibv_exp_flow_spec_eth),
+ {
+ .tunnel = MLX5_FLOW_LAYER_VXLAN_GPE,
+ .ptype = RTE_PTYPE_TUNNEL_VXLAN_GPE | RTE_PTYPE_L4_UDP,
},
- [RTE_FLOW_ITEM_TYPE_VLAN] = {
- .items = ITEMS(RTE_FLOW_ITEM_TYPE_IPV4,
- RTE_FLOW_ITEM_TYPE_IPV6),
- .actions = valid_actions,
- .mask = &(const struct rte_flow_item_vlan){
- .tci = -1,
- },
- .default_mask = &rte_flow_item_vlan_mask,
- .mask_sz = sizeof(struct rte_flow_item_vlan),
- .convert = mlx5_flow_create_vlan,
- .dst_sz = 0,
+ {
+ .tunnel = MLX5_FLOW_LAYER_GRE,
+ .ptype = RTE_PTYPE_TUNNEL_GRE,
},
- [RTE_FLOW_ITEM_TYPE_IPV4] = {
- .items = ITEMS(RTE_FLOW_ITEM_TYPE_UDP,
- RTE_FLOW_ITEM_TYPE_TCP),
- .actions = valid_actions,
- .mask = &(const struct rte_flow_item_ipv4){
- .hdr = {
- .src_addr = -1,
- .dst_addr = -1,
- .type_of_service = -1,
- .next_proto_id = -1,
- },
- },
- .default_mask = &rte_flow_item_ipv4_mask,
- .mask_sz = sizeof(struct rte_flow_item_ipv4),
- .convert = mlx5_flow_create_ipv4,
- .dst_sz = sizeof(struct ibv_exp_flow_spec_ipv4_ext),
+ {
+ .tunnel = MLX5_FLOW_LAYER_MPLS | MLX5_FLOW_LAYER_OUTER_L4_UDP,
+ .ptype = RTE_PTYPE_TUNNEL_MPLS_IN_GRE | RTE_PTYPE_L4_UDP,
},
- [RTE_FLOW_ITEM_TYPE_IPV6] = {
- .items = ITEMS(RTE_FLOW_ITEM_TYPE_UDP,
- RTE_FLOW_ITEM_TYPE_TCP),
- .actions = valid_actions,
- .mask = &(const struct rte_flow_item_ipv6){
- .hdr = {
- .src_addr = {
- 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff,
- },
- .dst_addr = {
- 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff,
- },
- .vtc_flow = -1,
- .proto = -1,
- .hop_limits = -1,
- },
- },
- .default_mask = &rte_flow_item_ipv6_mask,
- .mask_sz = sizeof(struct rte_flow_item_ipv6),
- .convert = mlx5_flow_create_ipv6,
- .dst_sz = sizeof(struct ibv_exp_flow_spec_ipv6_ext),
+ {
+ .tunnel = MLX5_FLOW_LAYER_MPLS,
+ .ptype = RTE_PTYPE_TUNNEL_MPLS_IN_GRE,
},
- [RTE_FLOW_ITEM_TYPE_UDP] = {
- .items = ITEMS(RTE_FLOW_ITEM_TYPE_VXLAN),
- .actions = valid_actions,
- .mask = &(const struct rte_flow_item_udp){
- .hdr = {
- .src_port = -1,
- .dst_port = -1,
- },
+};
+
+/**
+ * Discover the maximum number of priority available.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ *
+ * @return
+ * number of supported flow priority on success, a negative errno
+ * value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_discover_priorities(struct rte_eth_dev *dev)
+{
+ struct {
+ struct ibv_flow_attr attr;
+ struct ibv_flow_spec_eth eth;
+ struct ibv_flow_spec_action_drop drop;
+ } flow_attr = {
+ .attr = {
+ .num_of_specs = 2,
},
- .default_mask = &rte_flow_item_udp_mask,
- .mask_sz = sizeof(struct rte_flow_item_udp),
- .convert = mlx5_flow_create_udp,
- .dst_sz = sizeof(struct ibv_exp_flow_spec_tcp_udp),
- },
- [RTE_FLOW_ITEM_TYPE_TCP] = {
- .actions = valid_actions,
- .mask = &(const struct rte_flow_item_tcp){
- .hdr = {
- .src_port = -1,
- .dst_port = -1,
- },
+ .eth = {
+ .type = IBV_FLOW_SPEC_ETH,
+ .size = sizeof(struct ibv_flow_spec_eth),
},
- .default_mask = &rte_flow_item_tcp_mask,
- .mask_sz = sizeof(struct rte_flow_item_tcp),
- .convert = mlx5_flow_create_tcp,
- .dst_sz = sizeof(struct ibv_exp_flow_spec_tcp_udp),
- },
- [RTE_FLOW_ITEM_TYPE_VXLAN] = {
- .items = ITEMS(RTE_FLOW_ITEM_TYPE_ETH),
- .actions = valid_actions,
- .mask = &(const struct rte_flow_item_vxlan){
- .vni = "\xff\xff\xff",
+ .drop = {
+ .size = sizeof(struct ibv_flow_spec_action_drop),
+ .type = IBV_FLOW_SPEC_ACTION_DROP,
},
- .default_mask = &rte_flow_item_vxlan_mask,
- .mask_sz = sizeof(struct rte_flow_item_vxlan),
- .convert = mlx5_flow_create_vxlan,
- .dst_sz = sizeof(struct ibv_exp_flow_spec_tunnel),
- },
-};
+ };
+ struct ibv_flow *flow;
+ struct mlx5_hrxq *drop = mlx5_hrxq_drop_new(dev);
+ uint16_t vprio[] = { 8, 16 };
+ int i;
+ int priority = 0;
+
+ if (!drop) {
+ rte_errno = ENOTSUP;
+ return -rte_errno;
+ }
+ for (i = 0; i != RTE_DIM(vprio); i++) {
+ flow_attr.attr.priority = vprio[i] - 1;
+ flow = mlx5_glue->create_flow(drop->qp, &flow_attr.attr);
+ if (!flow)
+ break;
+ claim_zero(mlx5_glue->destroy_flow(flow));
+ priority = vprio[i];
+ }
+ switch (priority) {
+ case 8:
+ priority = RTE_DIM(priority_map_3);
+ break;
+ case 16:
+ priority = RTE_DIM(priority_map_5);
+ break;
+ default:
+ rte_errno = ENOTSUP;
+ DRV_LOG(ERR,
+ "port %u verbs maximum priority: %d expected 8/16",
+ dev->data->port_id, vprio[i]);
+ return -rte_errno;
+ }
+ mlx5_hrxq_drop_release(dev);
+ DRV_LOG(INFO, "port %u flow maximum priority: %d",
+ dev->data->port_id, priority);
+ return priority;
+}
-/** Structure to pass to the conversion function. */
-struct mlx5_flow {
- struct ibv_exp_flow_attr *ibv_attr; /**< Verbs attribute. */
- unsigned int offset; /**< Offset in bytes in the ibv_attr buffer. */
- uint32_t inner; /**< Set once VXLAN is encountered. */
- uint64_t hash_fields; /**< Fields that participate in the hash. */
-};
+/**
+ * Adjust flow priority.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param flow
+ * Pointer to an rte flow.
+ */
+static void
+mlx5_flow_adjust_priority(struct rte_eth_dev *dev, struct rte_flow *flow)
+{
+ struct priv *priv = dev->data->dev_private;
+ uint32_t priority = flow->attributes.priority;
+ uint32_t subpriority = flow->cur_verbs->attr->priority;
+
+ switch (priv->config.flow_prio) {
+ case RTE_DIM(priority_map_3):
+ priority = priority_map_3[priority][subpriority];
+ break;
+ case RTE_DIM(priority_map_5):
+ priority = priority_map_5[priority][subpriority];
+ break;
+ }
+ flow->cur_verbs->attr->priority = priority;
+}
-/** Structure for Drop queue. */
-struct rte_flow_drop {
- struct ibv_exp_rwq_ind_table *ind_table; /**< Indirection table. */
- struct ibv_qp *qp; /**< Verbs queue pair. */
- struct ibv_exp_wq *wqs[MLX5_DROP_WQ_N]; /**< Verbs work queue. */
- struct ibv_cq *cq; /**< Verbs completion queue. */
-};
+/**
+ * Get a flow counter.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ * @param[in] shared
+ * Indicate if this counter is shared with other flows.
+ * @param[in] id
+ * Counter identifier.
+ *
+ * @return
+ * A pointer to the counter, NULL otherwise and rte_errno is set.
+ */
+static struct mlx5_flow_counter *
+mlx5_flow_counter_new(struct rte_eth_dev *dev, uint32_t shared, uint32_t id)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct mlx5_flow_counter *cnt;
-struct mlx5_flow_action {
- uint32_t queue:1; /**< Target is a receive queue. */
- uint32_t drop:1; /**< Target is a drop queue. */
- uint32_t mark:1; /**< Mark is present in the flow. */
- uint32_t mark_id; /**< Mark identifier. */
- uint16_t queues[RTE_MAX_QUEUES_PER_PORT]; /**< Queues indexes to use. */
- uint16_t queues_n; /**< Number of entries in queue[]. */
-};
+ LIST_FOREACH(cnt, &priv->flow_counters, next) {
+ if (cnt->shared != shared)
+ continue;
+ if (cnt->id != id)
+ continue;
+ cnt->ref_cnt++;
+ return cnt;
+ }
+#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
+
+ struct mlx5_flow_counter tmpl = {
+ .shared = shared,
+ .id = id,
+ .cs = mlx5_glue->create_counter_set
+ (priv->ctx,
+ &(struct ibv_counter_set_init_attr){
+ .counter_set_id = id,
+ }),
+ .hits = 0,
+ .bytes = 0,
+ };
+
+ if (!tmpl.cs) {
+ rte_errno = errno;
+ return NULL;
+ }
+ cnt = rte_calloc(__func__, 1, sizeof(*cnt), 0);
+ if (!cnt) {
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+ *cnt = tmpl;
+ LIST_INSERT_HEAD(&priv->flow_counters, cnt, next);
+ return cnt;
+#endif
+ rte_errno = ENOTSUP;
+ return NULL;
+}
+
+/**
+ * Release a flow counter.
+ *
+ * @param[in] counter
+ * Pointer to the counter handler.
+ */
+static void
+mlx5_flow_counter_release(struct mlx5_flow_counter *counter)
+{
+ if (--counter->ref_cnt == 0) {
+ claim_zero(mlx5_glue->destroy_counter_set(counter->cs));
+ LIST_REMOVE(counter, next);
+ rte_free(counter);
+ }
+}
+
+/**
+ * Verify the @p attributes will be correctly understood by the NIC and store
+ * them in the @p flow if everything is correct.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ * @param[in] attributes
+ * Pointer to flow attributes
+ * @param[in, out] flow
+ * Pointer to the rte_flow structure.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_attributes(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attributes,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ uint32_t priority_max =
+ ((struct priv *)dev->data->dev_private)->config.flow_prio - 1;
+
+ if (attributes->group)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
+ NULL,
+ "groups is not supported");
+ if (attributes->priority != MLX5_FLOW_PRIO_RSVD &&
+ attributes->priority >= priority_max)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
+ NULL,
+ "priority out of range");
+ if (attributes->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
+ NULL,
+ "egress is not supported");
+ if (attributes->transfer)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
+ NULL,
+ "transfer is not supported");
+ if (!attributes->ingress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "ingress attribute is mandatory");
+ flow->attributes = *attributes;
+ if (attributes->priority == MLX5_FLOW_PRIO_RSVD)
+ flow->attributes.priority = priority_max;
+ return 0;
+}
+
+/**
+ * Verify the @p item specifications (spec, last, mask) are compatible with the
+ * NIC capabilities.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] mask
+ * @p item->mask or flow default bit-masks.
+ * @param[in] nic_mask
+ * Bit-masks covering supported fields by the NIC to compare with user mask.
+ * @param[in] size
+ * Bit-masks size in bytes.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_item_acceptable(const struct rte_flow_item *item,
+ const uint8_t *mask,
+ const uint8_t *nic_mask,
+ unsigned int size,
+ struct rte_flow_error *error)
+{
+ unsigned int i;
+
+ assert(nic_mask);
+ for (i = 0; i < size; ++i)
+ if ((nic_mask[i] | mask[i]) != nic_mask[i])
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "mask enables non supported"
+ " bits");
+ if (!item->spec && (item->mask || item->last))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "mask/last without a spec is not"
+ " supported");
+ if (item->spec && item->last) {
+ uint8_t spec[size];
+ uint8_t last[size];
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < size; ++i) {
+ spec[i] = ((const uint8_t *)item->spec)[i] & mask[i];
+ last[i] = ((const uint8_t *)item->last)[i] & mask[i];
+ }
+ ret = memcmp(spec, last, size);
+ if (ret != 0)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "range is not supported");
+ }
+ return 0;
+}
+
+/**
+ * Add a verbs item specification into @p flow.
+ *
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] src
+ * Create specification.
+ * @param[in] size
+ * Size in bytes of the specification to copy.
+ */
+static void
+mlx5_flow_spec_verbs_add(struct rte_flow *flow, void *src, unsigned int size)
+{
+ struct mlx5_flow_verbs *verbs = flow->cur_verbs;
+
+ if (verbs->specs) {
+ void *dst;
+
+ dst = (void *)(verbs->specs + verbs->size);
+ memcpy(dst, src, size);
+ ++verbs->attr->num_of_specs;
+ }
+ verbs->size += size;
+}
+
+/**
+ * Adjust verbs hash fields according to the @p flow information.
+ *
+ * @param[in, out] flow.
+ * Pointer to flow structure.
+ * @param[in] tunnel
+ * 1 when the hash field is for a tunnel item.
+ * @param[in] layer_types
+ * ETH_RSS_* types.
+ * @param[in] hash_fields
+ * Item hash fields.
+ */
+static void
+mlx5_flow_verbs_hashfields_adjust(struct rte_flow *flow,
+ int tunnel __rte_unused,
+ uint32_t layer_types, uint64_t hash_fields)
+{
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ hash_fields |= (tunnel ? IBV_RX_HASH_INNER : 0);
+ if (flow->rss.level == 2 && !tunnel)
+ hash_fields = 0;
+ else if (flow->rss.level < 2 && tunnel)
+ hash_fields = 0;
+#endif
+ if (!(flow->rss.types & layer_types))
+ hash_fields = 0;
+ flow->cur_verbs->hash_fields |= hash_fields;
+}
+
+/**
+ * Convert the @p item into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p item has fully been converted,
+ * otherwise another call with this returned memory size should be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_item_eth(const struct rte_flow_item *item, struct rte_flow *flow,
+ const size_t flow_size, struct rte_flow_error *error)
+{
+ const struct rte_flow_item_eth *spec = item->spec;
+ const struct rte_flow_item_eth *mask = item->mask;
+ const struct rte_flow_item_eth nic_mask = {
+ .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .type = RTE_BE16(0xffff),
+ };
+ const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+ const unsigned int size = sizeof(struct ibv_flow_spec_eth);
+ struct ibv_flow_spec_eth eth = {
+ .type = IBV_FLOW_SPEC_ETH | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
+ .size = size,
+ };
+ int ret;
+
+ if (flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
+ MLX5_FLOW_LAYER_OUTER_L2))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "L2 layers already configured");
+ if (!mask)
+ mask = &rte_flow_item_eth_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_eth),
+ error);
+ if (ret)
+ return ret;
+ flow->layers |= tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
+ MLX5_FLOW_LAYER_OUTER_L2;
+ if (size > flow_size)
+ return size;
+ if (spec) {
+ unsigned int i;
+
+ memcpy(ð.val.dst_mac, spec->dst.addr_bytes, ETHER_ADDR_LEN);
+ memcpy(ð.val.src_mac, spec->src.addr_bytes, ETHER_ADDR_LEN);
+ eth.val.ether_type = spec->type;
+ memcpy(ð.mask.dst_mac, mask->dst.addr_bytes, ETHER_ADDR_LEN);
+ memcpy(ð.mask.src_mac, mask->src.addr_bytes, ETHER_ADDR_LEN);
+ eth.mask.ether_type = mask->type;
+ /* Remove unwanted bits from values. */
+ for (i = 0; i < ETHER_ADDR_LEN; ++i) {
+ eth.val.dst_mac[i] &= eth.mask.dst_mac[i];
+ eth.val.src_mac[i] &= eth.mask.src_mac[i];
+ }
+ eth.val.ether_type &= eth.mask.ether_type;
+ }
+ flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
+ mlx5_flow_spec_verbs_add(flow, ð, size);
+ return size;
+}
+
+/**
+ * Update the VLAN tag in the Verbs Ethernet specification.
+ *
+ * @param[in, out] attr
+ * Pointer to Verbs attributes structure.
+ * @param[in] eth
+ * Verbs structure containing the VLAN information to copy.
+ */
+static void
+mlx5_flow_item_vlan_update(struct ibv_flow_attr *attr,
+ struct ibv_flow_spec_eth *eth)
+{
+ unsigned int i;
+ const enum ibv_flow_spec_type search = eth->type;
+ struct ibv_spec_header *hdr = (struct ibv_spec_header *)
+ ((uint8_t *)attr + sizeof(struct ibv_flow_attr));
+
+ for (i = 0; i != attr->num_of_specs; ++i) {
+ if (hdr->type == search) {
+ struct ibv_flow_spec_eth *e =
+ (struct ibv_flow_spec_eth *)hdr;
+
+ e->val.vlan_tag = eth->val.vlan_tag;
+ e->mask.vlan_tag = eth->mask.vlan_tag;
+ e->val.ether_type = eth->val.ether_type;
+ e->mask.ether_type = eth->mask.ether_type;
+ break;
+ }
+ hdr = (struct ibv_spec_header *)((uint8_t *)hdr + hdr->size);
+ }
+}
+
+/**
+ * Convert the @p item into @p flow (or by updating the already present
+ * Ethernet Verbs) specification after ensuring the NIC will understand and
+ * process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p item has fully been converted,
+ * otherwise another call with this returned memory size should be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_item_vlan(const struct rte_flow_item *item, struct rte_flow *flow,
+ const size_t flow_size, struct rte_flow_error *error)
+{
+ const struct rte_flow_item_vlan *spec = item->spec;
+ const struct rte_flow_item_vlan *mask = item->mask;
+ const struct rte_flow_item_vlan nic_mask = {
+ .tci = RTE_BE16(0x0fff),
+ .inner_type = RTE_BE16(0xffff),
+ };
+ unsigned int size = sizeof(struct ibv_flow_spec_eth);
+ const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+ struct ibv_flow_spec_eth eth = {
+ .type = IBV_FLOW_SPEC_ETH | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
+ .size = size,
+ };
+ int ret;
+ const uint32_t l34m = tunnel ? (MLX5_FLOW_LAYER_INNER_L3 |
+ MLX5_FLOW_LAYER_INNER_L4) :
+ (MLX5_FLOW_LAYER_OUTER_L3 | MLX5_FLOW_LAYER_OUTER_L4);
+ const uint32_t vlanm = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
+ MLX5_FLOW_LAYER_OUTER_VLAN;
+ const uint32_t l2m = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
+ MLX5_FLOW_LAYER_OUTER_L2;
+
+ if (flow->layers & vlanm)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "VLAN layer already configured");
+ else if ((flow->layers & l34m) != 0)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "L2 layer cannot follow L3/L4 layer");
+ if (!mask)
+ mask = &rte_flow_item_vlan_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_vlan), error);
+ if (ret)
+ return ret;
+ if (spec) {
+ eth.val.vlan_tag = spec->tci;
+ eth.mask.vlan_tag = mask->tci;
+ eth.val.vlan_tag &= eth.mask.vlan_tag;
+ eth.val.ether_type = spec->inner_type;
+ eth.mask.ether_type = mask->inner_type;
+ eth.val.ether_type &= eth.mask.ether_type;
+ }
+ /*
+ * From verbs perspective an empty VLAN is equivalent
+ * to a packet without VLAN layer.
+ */
+ if (!eth.mask.vlan_tag)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "VLAN cannot be empty");
+ if (!(flow->layers & l2m)) {
+ if (size <= flow_size) {
+ flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
+ mlx5_flow_spec_verbs_add(flow, ð, size);
+ }
+ } else {
+ if (flow->cur_verbs)
+ mlx5_flow_item_vlan_update(flow->cur_verbs->attr,
+ ð);
+ size = 0; /* Only an update is done in eth specification. */
+ }
+ flow->layers |= tunnel ?
+ (MLX5_FLOW_LAYER_INNER_L2 | MLX5_FLOW_LAYER_INNER_VLAN) :
+ (MLX5_FLOW_LAYER_OUTER_L2 | MLX5_FLOW_LAYER_OUTER_VLAN);
+ return size;
+}
+
+/**
+ * Convert the @p item into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p item has fully been converted,
+ * otherwise another call with this returned memory size should be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_item_ipv4(const struct rte_flow_item *item, struct rte_flow *flow,
+ const size_t flow_size, struct rte_flow_error *error)
+{
+ const struct rte_flow_item_ipv4 *spec = item->spec;
+ const struct rte_flow_item_ipv4 *mask = item->mask;
+ const struct rte_flow_item_ipv4 nic_mask = {
+ .hdr = {
+ .src_addr = RTE_BE32(0xffffffff),
+ .dst_addr = RTE_BE32(0xffffffff),
+ .type_of_service = 0xff,
+ .next_proto_id = 0xff,
+ },
+ };
+ const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+ unsigned int size = sizeof(struct ibv_flow_spec_ipv4_ext);
+ struct ibv_flow_spec_ipv4_ext ipv4 = {
+ .type = IBV_FLOW_SPEC_IPV4_EXT |
+ (tunnel ? IBV_FLOW_SPEC_INNER : 0),
+ .size = size,
+ };
+ int ret;
+
+ if (flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "multiple L3 layers not supported");
+ else if (flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "L3 cannot follow an L4 layer.");
+ if (!mask)
+ mask = &rte_flow_item_ipv4_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_ipv4), error);
+ if (ret < 0)
+ return ret;
+ flow->layers |= tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV4 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV4;
+ if (spec) {
+ ipv4.val = (struct ibv_flow_ipv4_ext_filter){
+ .src_ip = spec->hdr.src_addr,
+ .dst_ip = spec->hdr.dst_addr,
+ .proto = spec->hdr.next_proto_id,
+ .tos = spec->hdr.type_of_service,
+ };
+ ipv4.mask = (struct ibv_flow_ipv4_ext_filter){
+ .src_ip = mask->hdr.src_addr,
+ .dst_ip = mask->hdr.dst_addr,
+ .proto = mask->hdr.next_proto_id,
+ .tos = mask->hdr.type_of_service,
+ };
+ /* Remove unwanted bits from values. */
+ ipv4.val.src_ip &= ipv4.mask.src_ip;
+ ipv4.val.dst_ip &= ipv4.mask.dst_ip;
+ ipv4.val.proto &= ipv4.mask.proto;
+ ipv4.val.tos &= ipv4.mask.tos;
+ }
+ flow->l3_protocol_en = !!ipv4.mask.proto;
+ flow->l3_protocol = ipv4.val.proto;
+ if (size <= flow_size) {
+ mlx5_flow_verbs_hashfields_adjust
+ (flow, tunnel,
+ (ETH_RSS_IPV4 | ETH_RSS_FRAG_IPV4 |
+ ETH_RSS_NONFRAG_IPV4_OTHER),
+ (IBV_RX_HASH_SRC_IPV4 | IBV_RX_HASH_DST_IPV4));
+ flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L3;
+ mlx5_flow_spec_verbs_add(flow, &ipv4, size);
+ }
+ return size;
+}
+
+/**
+ * Convert the @p item into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p item has fully been converted,
+ * otherwise another call with this returned memory size should be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_item_ipv6(const struct rte_flow_item *item, struct rte_flow *flow,
+ const size_t flow_size, struct rte_flow_error *error)
+{
+ const struct rte_flow_item_ipv6 *spec = item->spec;
+ const struct rte_flow_item_ipv6 *mask = item->mask;
+ const struct rte_flow_item_ipv6 nic_mask = {
+ .hdr = {
+ .src_addr =
+ "\xff\xff\xff\xff\xff\xff\xff\xff"
+ "\xff\xff\xff\xff\xff\xff\xff\xff",
+ .dst_addr =
+ "\xff\xff\xff\xff\xff\xff\xff\xff"
+ "\xff\xff\xff\xff\xff\xff\xff\xff",
+ .vtc_flow = RTE_BE32(0xffffffff),
+ .proto = 0xff,
+ .hop_limits = 0xff,
+ },
+ };
+ const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+ unsigned int size = sizeof(struct ibv_flow_spec_ipv6);
+ struct ibv_flow_spec_ipv6 ipv6 = {
+ .type = IBV_FLOW_SPEC_IPV6 | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
+ .size = size,
+ };
+ int ret;
+
+ if (flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "multiple L3 layers not supported");
+ else if (flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "L3 cannot follow an L4 layer.");
+ /*
+ * IPv6 is not recognised by the NIC inside a GRE tunnel.
+ * Such support has to be disabled as the rule will be
+ * accepted. Issue reproduced with Mellanox OFED 4.3-3.0.2.1 and
+ * Mellanox OFED 4.4-1.0.0.0.
+ */
+ if (tunnel && flow->layers & MLX5_FLOW_LAYER_GRE)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "IPv6 inside a GRE tunnel is"
+ " not recognised.");
+ if (!mask)
+ mask = &rte_flow_item_ipv6_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_ipv6), error);
+ if (ret < 0)
+ return ret;
+ flow->layers |= tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV6;
+ if (spec) {
+ unsigned int i;
+ uint32_t vtc_flow_val;
+ uint32_t vtc_flow_mask;
+
+ memcpy(&ipv6.val.src_ip, spec->hdr.src_addr,
+ RTE_DIM(ipv6.val.src_ip));
+ memcpy(&ipv6.val.dst_ip, spec->hdr.dst_addr,
+ RTE_DIM(ipv6.val.dst_ip));
+ memcpy(&ipv6.mask.src_ip, mask->hdr.src_addr,
+ RTE_DIM(ipv6.mask.src_ip));
+ memcpy(&ipv6.mask.dst_ip, mask->hdr.dst_addr,
+ RTE_DIM(ipv6.mask.dst_ip));
+ vtc_flow_val = rte_be_to_cpu_32(spec->hdr.vtc_flow);
+ vtc_flow_mask = rte_be_to_cpu_32(mask->hdr.vtc_flow);
+ ipv6.val.flow_label =
+ rte_cpu_to_be_32((vtc_flow_val & IPV6_HDR_FL_MASK) >>
+ IPV6_HDR_FL_SHIFT);
+ ipv6.val.traffic_class = (vtc_flow_val & IPV6_HDR_TC_MASK) >>
+ IPV6_HDR_TC_SHIFT;
+ ipv6.val.next_hdr = spec->hdr.proto;
+ ipv6.val.hop_limit = spec->hdr.hop_limits;
+ ipv6.mask.flow_label =
+ rte_cpu_to_be_32((vtc_flow_mask & IPV6_HDR_FL_MASK) >>
+ IPV6_HDR_FL_SHIFT);
+ ipv6.mask.traffic_class = (vtc_flow_mask & IPV6_HDR_TC_MASK) >>
+ IPV6_HDR_TC_SHIFT;
+ ipv6.mask.next_hdr = mask->hdr.proto;
+ ipv6.mask.hop_limit = mask->hdr.hop_limits;
+ /* Remove unwanted bits from values. */
+ for (i = 0; i < RTE_DIM(ipv6.val.src_ip); ++i) {
+ ipv6.val.src_ip[i] &= ipv6.mask.src_ip[i];
+ ipv6.val.dst_ip[i] &= ipv6.mask.dst_ip[i];
+ }
+ ipv6.val.flow_label &= ipv6.mask.flow_label;
+ ipv6.val.traffic_class &= ipv6.mask.traffic_class;
+ ipv6.val.next_hdr &= ipv6.mask.next_hdr;
+ ipv6.val.hop_limit &= ipv6.mask.hop_limit;
+ }
+ flow->l3_protocol_en = !!ipv6.mask.next_hdr;
+ flow->l3_protocol = ipv6.val.next_hdr;
+ if (size <= flow_size) {
+ mlx5_flow_verbs_hashfields_adjust
+ (flow, tunnel,
+ (ETH_RSS_IPV6 | ETH_RSS_NONFRAG_IPV6_OTHER),
+ (IBV_RX_HASH_SRC_IPV6 | IBV_RX_HASH_DST_IPV6));
+ flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L3;
+ mlx5_flow_spec_verbs_add(flow, &ipv6, size);
+ }
+ return size;
+}
+
+/**
+ * Convert the @p item into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p item has fully been converted,
+ * otherwise another call with this returned memory size should be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_item_udp(const struct rte_flow_item *item, struct rte_flow *flow,
+ const size_t flow_size, struct rte_flow_error *error)
+{
+ const struct rte_flow_item_udp *spec = item->spec;
+ const struct rte_flow_item_udp *mask = item->mask;
+ const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+ unsigned int size = sizeof(struct ibv_flow_spec_tcp_udp);
+ struct ibv_flow_spec_tcp_udp udp = {
+ .type = IBV_FLOW_SPEC_UDP | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
+ .size = size,
+ };
+ int ret;
+
+ if (flow->l3_protocol_en && flow->l3_protocol != MLX5_IP_PROTOCOL_UDP)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "protocol filtering not compatible"
+ " with UDP layer");
+ if (!(flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3)))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "L3 is mandatory to filter"
+ " on L4");
+ if (flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "L4 layer is already"
+ " present");
+ if (!mask)
+ mask = &rte_flow_item_udp_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_udp_mask,
+ sizeof(struct rte_flow_item_udp), error);
+ if (ret < 0)
+ return ret;
+ flow->layers |= tunnel ? MLX5_FLOW_LAYER_INNER_L4_UDP :
+ MLX5_FLOW_LAYER_OUTER_L4_UDP;
+ if (spec) {
+ udp.val.dst_port = spec->hdr.dst_port;
+ udp.val.src_port = spec->hdr.src_port;
+ udp.mask.dst_port = mask->hdr.dst_port;
+ udp.mask.src_port = mask->hdr.src_port;
+ /* Remove unwanted bits from values. */
+ udp.val.src_port &= udp.mask.src_port;
+ udp.val.dst_port &= udp.mask.dst_port;
+ }
+ if (size <= flow_size) {
+ mlx5_flow_verbs_hashfields_adjust(flow, tunnel, ETH_RSS_UDP,
+ (IBV_RX_HASH_SRC_PORT_UDP |
+ IBV_RX_HASH_DST_PORT_UDP));
+ flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L4;
+ mlx5_flow_spec_verbs_add(flow, &udp, size);
+ }
+ return size;
+}
+
+/**
+ * Convert the @p item into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p item has fully been converted,
+ * otherwise another call with this returned memory size should be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_item_tcp(const struct rte_flow_item *item, struct rte_flow *flow,
+ const size_t flow_size, struct rte_flow_error *error)
+{
+ const struct rte_flow_item_tcp *spec = item->spec;
+ const struct rte_flow_item_tcp *mask = item->mask;
+ const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+ unsigned int size = sizeof(struct ibv_flow_spec_tcp_udp);
+ struct ibv_flow_spec_tcp_udp tcp = {
+ .type = IBV_FLOW_SPEC_TCP | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
+ .size = size,
+ };
+ int ret;
+
+ if (flow->l3_protocol_en && flow->l3_protocol != MLX5_IP_PROTOCOL_TCP)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "protocol filtering not compatible"
+ " with TCP layer");
+ if (!(flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3)))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "L3 is mandatory to filter on L4");
+ if (flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "L4 layer is already present");
+ if (!mask)
+ mask = &rte_flow_item_tcp_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_tcp_mask,
+ sizeof(struct rte_flow_item_tcp), error);
+ if (ret < 0)
+ return ret;
+ flow->layers |= tunnel ? MLX5_FLOW_LAYER_INNER_L4_TCP :
+ MLX5_FLOW_LAYER_OUTER_L4_TCP;
+ if (spec) {
+ tcp.val.dst_port = spec->hdr.dst_port;
+ tcp.val.src_port = spec->hdr.src_port;
+ tcp.mask.dst_port = mask->hdr.dst_port;
+ tcp.mask.src_port = mask->hdr.src_port;
+ /* Remove unwanted bits from values. */
+ tcp.val.src_port &= tcp.mask.src_port;
+ tcp.val.dst_port &= tcp.mask.dst_port;
+ }
+ if (size <= flow_size) {
+ mlx5_flow_verbs_hashfields_adjust(flow, tunnel, ETH_RSS_TCP,
+ (IBV_RX_HASH_SRC_PORT_TCP |
+ IBV_RX_HASH_DST_PORT_TCP));
+ flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L4;
+ mlx5_flow_spec_verbs_add(flow, &tcp, size);
+ }
+ return size;
+}
+
+/**
+ * Convert the @p item into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p item has fully been converted,
+ * otherwise another call with this returned memory size should be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_item_vxlan(const struct rte_flow_item *item, struct rte_flow *flow,
+ const size_t flow_size, struct rte_flow_error *error)
+{
+ const struct rte_flow_item_vxlan *spec = item->spec;
+ const struct rte_flow_item_vxlan *mask = item->mask;
+ unsigned int size = sizeof(struct ibv_flow_spec_tunnel);
+ struct ibv_flow_spec_tunnel vxlan = {
+ .type = IBV_FLOW_SPEC_VXLAN_TUNNEL,
+ .size = size,
+ };
+ int ret;
+ union vni {
+ uint32_t vlan_id;
+ uint8_t vni[4];
+ } id = { .vlan_id = 0, };
+
+ if (flow->layers & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "a tunnel is already present");
+ /*
+ * Verify only UDPv4 is present as defined in
+ * https://tools.ietf.org/html/rfc7348
+ */
+ if (!(flow->layers & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "no outer UDP layer found");
+ if (!mask)
+ mask = &rte_flow_item_vxlan_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_vxlan_mask,
+ sizeof(struct rte_flow_item_vxlan), error);
+ if (ret < 0)
+ return ret;
+ if (spec) {
+ memcpy(&id.vni[1], spec->vni, 3);
+ vxlan.val.tunnel_id = id.vlan_id;
+ memcpy(&id.vni[1], mask->vni, 3);
+ vxlan.mask.tunnel_id = id.vlan_id;
+ /* Remove unwanted bits from values. */
+ vxlan.val.tunnel_id &= vxlan.mask.tunnel_id;
+ }
+ /*
+ * Tunnel id 0 is equivalent as not adding a VXLAN layer, if
+ * only this layer is defined in the Verbs specification it is
+ * interpreted as wildcard and all packets will match this
+ * rule, if it follows a full stack layer (ex: eth / ipv4 /
+ * udp), all packets matching the layers before will also
+ * match this rule. To avoid such situation, VNI 0 is
+ * currently refused.
+ */
+ if (!vxlan.val.tunnel_id)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "VXLAN vni cannot be 0");
+ if (!(flow->layers & MLX5_FLOW_LAYER_OUTER))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "VXLAN tunnel must be fully defined");
+ if (size <= flow_size) {
+ mlx5_flow_spec_verbs_add(flow, &vxlan, size);
+ flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
+ }
+ flow->layers |= MLX5_FLOW_LAYER_VXLAN;
+ return size;
+}
+
+/**
+ * Convert the @p item into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] item
+ * Item specification.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p item has fully been converted,
+ * otherwise another call with this returned memory size should be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_item_vxlan_gpe(struct rte_eth_dev *dev,
+ const struct rte_flow_item *item,
+ struct rte_flow *flow, const size_t flow_size,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_vxlan_gpe *spec = item->spec;
+ const struct rte_flow_item_vxlan_gpe *mask = item->mask;
+ unsigned int size = sizeof(struct ibv_flow_spec_tunnel);
+ struct ibv_flow_spec_tunnel vxlan_gpe = {
+ .type = IBV_FLOW_SPEC_VXLAN_TUNNEL,
+ .size = size,
+ };
+ int ret;
+ union vni {
+ uint32_t vlan_id;
+ uint8_t vni[4];
+ } id = { .vlan_id = 0, };
+
+ if (!((struct priv *)dev->data->dev_private)->config.l3_vxlan_en)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "L3 VXLAN is not enabled by device"
+ " parameter and/or not configured in"
+ " firmware");
+ if (flow->layers & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "a tunnel is already present");
+ /*
+ * Verify only UDPv4 is present as defined in
+ * https://tools.ietf.org/html/rfc7348
+ */
+ if (!(flow->layers & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "no outer UDP layer found");
+ if (!mask)
+ mask = &rte_flow_item_vxlan_gpe_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_vxlan_gpe_mask,
+ sizeof(struct rte_flow_item_vxlan_gpe), error);
+ if (ret < 0)
+ return ret;
+ if (spec) {
+ memcpy(&id.vni[1], spec->vni, 3);
+ vxlan_gpe.val.tunnel_id = id.vlan_id;
+ memcpy(&id.vni[1], mask->vni, 3);
+ vxlan_gpe.mask.tunnel_id = id.vlan_id;
+ if (spec->protocol)
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "VxLAN-GPE protocol not supported");
+ /* Remove unwanted bits from values. */
+ vxlan_gpe.val.tunnel_id &= vxlan_gpe.mask.tunnel_id;
+ }
+ /*
+ * Tunnel id 0 is equivalent as not adding a VXLAN layer, if only this
+ * layer is defined in the Verbs specification it is interpreted as
+ * wildcard and all packets will match this rule, if it follows a full
+ * stack layer (ex: eth / ipv4 / udp), all packets matching the layers
+ * before will also match this rule. To avoid such situation, VNI 0
+ * is currently refused.
+ */
+ if (!vxlan_gpe.val.tunnel_id)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "VXLAN-GPE vni cannot be 0");
+ if (!(flow->layers & MLX5_FLOW_LAYER_OUTER))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "VXLAN-GPE tunnel must be fully"
+ " defined");
+ if (size <= flow_size) {
+ mlx5_flow_spec_verbs_add(flow, &vxlan_gpe, size);
+ flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
+ }
+ flow->layers |= MLX5_FLOW_LAYER_VXLAN_GPE;
+ return size;
+}
+
+/**
+ * Update the protocol in Verbs IPv4/IPv6 spec.
+ *
+ * @param[in, out] attr
+ * Pointer to Verbs attributes structure.
+ * @param[in] search
+ * Specification type to search in order to update the IP protocol.
+ * @param[in] protocol
+ * Protocol value to set if none is present in the specification.
+ */
+static void
+mlx5_flow_item_gre_ip_protocol_update(struct ibv_flow_attr *attr,
+ enum ibv_flow_spec_type search,
+ uint8_t protocol)
+{
+ unsigned int i;
+ struct ibv_spec_header *hdr = (struct ibv_spec_header *)
+ ((uint8_t *)attr + sizeof(struct ibv_flow_attr));
+
+ if (!attr)
+ return;
+ for (i = 0; i != attr->num_of_specs; ++i) {
+ if (hdr->type == search) {
+ union {
+ struct ibv_flow_spec_ipv4_ext *ipv4;
+ struct ibv_flow_spec_ipv6 *ipv6;
+ } ip;
+
+ switch (search) {
+ case IBV_FLOW_SPEC_IPV4_EXT:
+ ip.ipv4 = (struct ibv_flow_spec_ipv4_ext *)hdr;
+ if (!ip.ipv4->val.proto) {
+ ip.ipv4->val.proto = protocol;
+ ip.ipv4->mask.proto = 0xff;
+ }
+ break;
+ case IBV_FLOW_SPEC_IPV6:
+ ip.ipv6 = (struct ibv_flow_spec_ipv6 *)hdr;
+ if (!ip.ipv6->val.next_hdr) {
+ ip.ipv6->val.next_hdr = protocol;
+ ip.ipv6->mask.next_hdr = 0xff;
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+ }
+ hdr = (struct ibv_spec_header *)((uint8_t *)hdr + hdr->size);
+ }
+}
+
+/**
+ * Convert the @p item into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * It will also update the previous L3 layer with the protocol value matching
+ * the GRE.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] item
+ * Item specification.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p item has fully been converted,
+ * otherwise another call with this returned memory size should be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_item_gre(const struct rte_flow_item *item,
+ struct rte_flow *flow, const size_t flow_size,
+ struct rte_flow_error *error)
+{
+ struct mlx5_flow_verbs *verbs = flow->cur_verbs;
+ const struct rte_flow_item_gre *spec = item->spec;
+ const struct rte_flow_item_gre *mask = item->mask;
+#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
+ unsigned int size = sizeof(struct ibv_flow_spec_gre);
+ struct ibv_flow_spec_gre tunnel = {
+ .type = IBV_FLOW_SPEC_GRE,
+ .size = size,
+ };
+#else
+ unsigned int size = sizeof(struct ibv_flow_spec_tunnel);
+ struct ibv_flow_spec_tunnel tunnel = {
+ .type = IBV_FLOW_SPEC_VXLAN_TUNNEL,
+ .size = size,
+ };
+#endif
+ int ret;
+
+ if (flow->l3_protocol_en && flow->l3_protocol != MLX5_IP_PROTOCOL_GRE)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "protocol filtering not compatible"
+ " with this GRE layer");
+ if (flow->layers & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "a tunnel is already present");
+ if (!(flow->layers & MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "L3 Layer is missing");
+ if (!mask)
+ mask = &rte_flow_item_gre_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_gre_mask,
+ sizeof(struct rte_flow_item_gre), error);
+ if (ret < 0)
+ return ret;
+#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
+ if (spec) {
+ tunnel.val.c_ks_res0_ver = spec->c_rsvd0_ver;
+ tunnel.val.protocol = spec->protocol;
+ tunnel.mask.c_ks_res0_ver = mask->c_rsvd0_ver;
+ tunnel.mask.protocol = mask->protocol;
+ /* Remove unwanted bits from values. */
+ tunnel.val.c_ks_res0_ver &= tunnel.mask.c_ks_res0_ver;
+ tunnel.val.protocol &= tunnel.mask.protocol;
+ tunnel.val.key &= tunnel.mask.key;
+ }
+#else
+ if (spec && (spec->protocol & mask->protocol))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "without MPLS support the"
+ " specification cannot be used for"
+ " filtering");
+#endif /* !HAVE_IBV_DEVICE_MPLS_SUPPORT */
+ if (size <= flow_size) {
+ if (flow->layers & MLX5_FLOW_LAYER_OUTER_L3_IPV4)
+ mlx5_flow_item_gre_ip_protocol_update
+ (verbs->attr, IBV_FLOW_SPEC_IPV4_EXT,
+ MLX5_IP_PROTOCOL_GRE);
+ else
+ mlx5_flow_item_gre_ip_protocol_update
+ (verbs->attr, IBV_FLOW_SPEC_IPV6,
+ MLX5_IP_PROTOCOL_GRE);
+ mlx5_flow_spec_verbs_add(flow, &tunnel, size);
+ flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
+ }
+ flow->layers |= MLX5_FLOW_LAYER_GRE;
+ return size;
+}
+
+/**
+ * Convert the @p item into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p item has fully been converted,
+ * otherwise another call with this returned memory size should be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_item_mpls(const struct rte_flow_item *item __rte_unused,
+ struct rte_flow *flow __rte_unused,
+ const size_t flow_size __rte_unused,
+ struct rte_flow_error *error)
+{
+#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
+ const struct rte_flow_item_mpls *spec = item->spec;
+ const struct rte_flow_item_mpls *mask = item->mask;
+ unsigned int size = sizeof(struct ibv_flow_spec_mpls);
+ struct ibv_flow_spec_mpls mpls = {
+ .type = IBV_FLOW_SPEC_MPLS,
+ .size = size,
+ };
+ int ret;
+
+ if (flow->l3_protocol_en && flow->l3_protocol != MLX5_IP_PROTOCOL_MPLS)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "protocol filtering not compatible"
+ " with MPLS layer");
+ if (flow->layers & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "a tunnel is already"
+ " present");
+ if (!mask)
+ mask = &rte_flow_item_mpls_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_mpls_mask,
+ sizeof(struct rte_flow_item_mpls), error);
+ if (ret < 0)
+ return ret;
+ if (spec) {
+ memcpy(&mpls.val.label, spec, sizeof(mpls.val.label));
+ memcpy(&mpls.mask.label, mask, sizeof(mpls.mask.label));
+ /* Remove unwanted bits from values. */
+ mpls.val.label &= mpls.mask.label;
+ }
+ if (size <= flow_size) {
+ mlx5_flow_spec_verbs_add(flow, &mpls, size);
+ flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
+ }
+ flow->layers |= MLX5_FLOW_LAYER_MPLS;
+ return size;
+#endif /* !HAVE_IBV_DEVICE_MPLS_SUPPORT */
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "MPLS is not supported by Verbs, please"
+ " update.");
+}
+
+/**
+ * Convert the @p pattern into a Verbs specifications after ensuring the NIC
+ * will understand and process it correctly.
+ * The conversion is performed item per item, each of them is written into
+ * the @p flow if its size is lesser or equal to @p flow_size.
+ * Validation and memory consumption computation are still performed until the
+ * end of @p pattern, unless an error is encountered.
+ *
+ * @param[in] pattern
+ * Flow pattern.
+ * @param[in, out] flow
+ * Pointer to the rte_flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small some
+ * garbage may be present.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @pattern has fully been
+ * converted, otherwise another call with this returned memory size should
+ * be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_items(struct rte_eth_dev *dev,
+ const struct rte_flow_item pattern[],
+ struct rte_flow *flow, const size_t flow_size,
+ struct rte_flow_error *error)
+{
+ int remain = flow_size;
+ size_t size = 0;
+
+ for (; pattern->type != RTE_FLOW_ITEM_TYPE_END; pattern++) {
+ int ret = 0;
+
+ switch (pattern->type) {
+ case RTE_FLOW_ITEM_TYPE_VOID:
+ break;
+ case RTE_FLOW_ITEM_TYPE_ETH:
+ ret = mlx5_flow_item_eth(pattern, flow, remain, error);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VLAN:
+ ret = mlx5_flow_item_vlan(pattern, flow, remain, error);
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV4:
+ ret = mlx5_flow_item_ipv4(pattern, flow, remain, error);
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV6:
+ ret = mlx5_flow_item_ipv6(pattern, flow, remain, error);
+ break;
+ case RTE_FLOW_ITEM_TYPE_UDP:
+ ret = mlx5_flow_item_udp(pattern, flow, remain, error);
+ break;
+ case RTE_FLOW_ITEM_TYPE_TCP:
+ ret = mlx5_flow_item_tcp(pattern, flow, remain, error);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN:
+ ret = mlx5_flow_item_vxlan(pattern, flow, remain,
+ error);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
+ ret = mlx5_flow_item_vxlan_gpe(dev, pattern, flow,
+ remain, error);
+ break;
+ case RTE_FLOW_ITEM_TYPE_GRE:
+ ret = mlx5_flow_item_gre(pattern, flow, remain, error);
+ break;
+ case RTE_FLOW_ITEM_TYPE_MPLS:
+ ret = mlx5_flow_item_mpls(pattern, flow, remain, error);
+ break;
+ default:
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ pattern,
+ "item not supported");
+ }
+ if (ret < 0)
+ return ret;
+ if (remain > ret)
+ remain -= ret;
+ else
+ remain = 0;
+ size += ret;
+ }
+ if (!flow->layers) {
+ const struct rte_flow_item item = {
+ .type = RTE_FLOW_ITEM_TYPE_ETH,
+ };
+
+ return mlx5_flow_item_eth(&item, flow, flow_size, error);
+ }
+ return size;
+}
+
+/**
+ * Convert the @p action into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param[in] action
+ * Action configuration.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p action has fully been
+ * converted, otherwise another call with this returned memory size should
+ * be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_action_drop(const struct rte_flow_action *action,
+ struct rte_flow *flow, const size_t flow_size,
+ struct rte_flow_error *error)
+{
+ unsigned int size = sizeof(struct ibv_flow_spec_action_drop);
+ struct ibv_flow_spec_action_drop drop = {
+ .type = IBV_FLOW_SPEC_ACTION_DROP,
+ .size = size,
+ };
+
+ if (flow->fate)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "multiple fate actions are not"
+ " supported");
+ if (flow->modifier & (MLX5_FLOW_MOD_FLAG | MLX5_FLOW_MOD_MARK))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "drop is not compatible with"
+ " flag/mark action");
+ if (size < flow_size)
+ mlx5_flow_spec_verbs_add(flow, &drop, size);
+ flow->fate |= MLX5_FLOW_FATE_DROP;
+ return size;
+}
+
+/**
+ * Convert the @p action into @p flow after ensuring the NIC will understand
+ * and process it correctly.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device structure.
+ * @param[in] action
+ * Action configuration.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_action_queue(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+ const struct rte_flow_action_queue *queue = action->conf;
+
+ if (flow->fate)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "multiple fate actions are not"
+ " supported");
+ if (queue->index >= priv->rxqs_n)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &queue->index,
+ "queue index out of range");
+ if (!(*priv->rxqs)[queue->index])
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &queue->index,
+ "queue is not configured");
+ if (flow->queue)
+ (*flow->queue)[0] = queue->index;
+ flow->rss.queue_num = 1;
+ flow->fate |= MLX5_FLOW_FATE_QUEUE;
+ return 0;
+}
+
+/**
+ * Ensure the @p action will be understood and used correctly by the NIC.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param action[in]
+ * Pointer to flow actions array.
+ * @param flow[in, out]
+ * Pointer to the rte_flow structure.
+ * @param error[in, out]
+ * Pointer to error structure.
+ *
+ * @return
+ * On success @p flow->queue array and @p flow->rss are filled and valid.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_action_rss(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+ const struct rte_flow_action_rss *rss = action->conf;
+ unsigned int i;
+
+ if (flow->fate)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "multiple fate actions are not"
+ " supported");
+ if (rss->func != RTE_ETH_HASH_FUNCTION_DEFAULT &&
+ rss->func != RTE_ETH_HASH_FUNCTION_TOEPLITZ)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->func,
+ "RSS hash function not supported");
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ if (rss->level > 2)
+#else
+ if (rss->level > 1)
+#endif
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->level,
+ "tunnel RSS is not supported");
+ if (rss->key_len < MLX5_RSS_HASH_KEY_LEN)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key too small");
+ if (rss->key_len > MLX5_RSS_HASH_KEY_LEN)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key too large");
+ if (rss->queue_num > priv->config.ind_table_max_size)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->queue_num,
+ "number of queues too large");
+ if (rss->types & MLX5_RSS_HF_MASK)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->types,
+ "some RSS protocols are not"
+ " supported");
+ for (i = 0; i != rss->queue_num; ++i) {
+ if (!(*priv->rxqs)[rss->queue[i]])
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->queue[i],
+ "queue is not configured");
+ }
+ if (flow->queue)
+ memcpy((*flow->queue), rss->queue,
+ rss->queue_num * sizeof(uint16_t));
+ flow->rss.queue_num = rss->queue_num;
+ memcpy(flow->key, rss->key, MLX5_RSS_HASH_KEY_LEN);
+ flow->rss.types = rss->types;
+ flow->rss.level = rss->level;
+ flow->fate |= MLX5_FLOW_FATE_RSS;
+ return 0;
+}
+
+/**
+ * Convert the @p action into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param[in] action
+ * Action configuration.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p action has fully been
+ * converted, otherwise another call with this returned memory size should
+ * be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_action_flag(const struct rte_flow_action *action,
+ struct rte_flow *flow, const size_t flow_size,
+ struct rte_flow_error *error)
+{
+ unsigned int size = sizeof(struct ibv_flow_spec_action_tag);
+ struct ibv_flow_spec_action_tag tag = {
+ .type = IBV_FLOW_SPEC_ACTION_TAG,
+ .size = size,
+ .tag_id = mlx5_flow_mark_set(MLX5_FLOW_MARK_DEFAULT),
+ };
+ struct mlx5_flow_verbs *verbs = flow->cur_verbs;
+
+ if (flow->modifier & MLX5_FLOW_MOD_FLAG)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "flag action already present");
+ if (flow->fate & MLX5_FLOW_FATE_DROP)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "flag is not compatible with drop"
+ " action");
+ if (flow->modifier & MLX5_FLOW_MOD_MARK)
+ size = 0;
+ else if (size <= flow_size && verbs)
+ mlx5_flow_spec_verbs_add(flow, &tag, size);
+ flow->modifier |= MLX5_FLOW_MOD_FLAG;
+ return size;
+}
+
+/**
+ * Update verbs specification to modify the flag to mark.
+ *
+ * @param[in, out] verbs
+ * Pointer to the mlx5_flow_verbs structure.
+ * @param[in] mark_id
+ * Mark identifier to replace the flag.
+ */
+static void
+mlx5_flow_verbs_mark_update(struct mlx5_flow_verbs *verbs, uint32_t mark_id)
+{
+ struct ibv_spec_header *hdr;
+ int i;
+
+ if (!verbs)
+ return;
+ /* Update Verbs specification. */
+ hdr = (struct ibv_spec_header *)verbs->specs;
+ if (!hdr)
+ return;
+ for (i = 0; i != verbs->attr->num_of_specs; ++i) {
+ if (hdr->type == IBV_FLOW_SPEC_ACTION_TAG) {
+ struct ibv_flow_spec_action_tag *t =
+ (struct ibv_flow_spec_action_tag *)hdr;
+
+ t->tag_id = mlx5_flow_mark_set(mark_id);
+ }
+ hdr = (struct ibv_spec_header *)((uintptr_t)hdr + hdr->size);
+ }
+}
/**
- * Check support for a given item.
+ * Convert the @p action into @p flow (or by updating the already present
+ * Flag Verbs specification) after ensuring the NIC will understand and
+ * process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
*
- * @param item[in]
- * Item specification.
- * @param mask[in]
- * Bit-masks covering supported fields to compare with spec, last and mask in
- * \item.
- * @param size
- * Bit-Mask size in bytes.
+ * @param[in] action
+ * Action configuration.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
*
* @return
- * 0 on success.
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p action has fully been
+ * converted, otherwise another call with this returned memory size should
+ * be done.
+ * On error, a negative errno value is returned and rte_errno is set.
*/
static int
-mlx5_flow_item_validate(const struct rte_flow_item *item,
- const uint8_t *mask, unsigned int size)
+mlx5_flow_action_mark(const struct rte_flow_action *action,
+ struct rte_flow *flow, const size_t flow_size,
+ struct rte_flow_error *error)
{
- int ret = 0;
-
- if (!item->spec && (item->mask || item->last))
- return -1;
- if (item->spec && !item->mask) {
- unsigned int i;
- const uint8_t *spec = item->spec;
-
- for (i = 0; i < size; ++i)
- if ((spec[i] | mask[i]) != mask[i])
- return -1;
+ const struct rte_flow_action_mark *mark = action->conf;
+ unsigned int size = sizeof(struct ibv_flow_spec_action_tag);
+ struct ibv_flow_spec_action_tag tag = {
+ .type = IBV_FLOW_SPEC_ACTION_TAG,
+ .size = size,
+ };
+ struct mlx5_flow_verbs *verbs = flow->cur_verbs;
+
+ if (!mark)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "configuration cannot be null");
+ if (mark->id >= MLX5_FLOW_MARK_MAX)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &mark->id,
+ "mark id must in 0 <= id < "
+ RTE_STR(MLX5_FLOW_MARK_MAX));
+ if (flow->modifier & MLX5_FLOW_MOD_MARK)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "mark action already present");
+ if (flow->fate & MLX5_FLOW_FATE_DROP)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "mark is not compatible with drop"
+ " action");
+ if (flow->modifier & MLX5_FLOW_MOD_FLAG) {
+ mlx5_flow_verbs_mark_update(verbs, mark->id);
+ size = 0;
+ } else if (size <= flow_size) {
+ tag.tag_id = mlx5_flow_mark_set(mark->id);
+ mlx5_flow_spec_verbs_add(flow, &tag, size);
}
- if (item->last && !item->mask) {
- unsigned int i;
- const uint8_t *spec = item->last;
+ flow->modifier |= MLX5_FLOW_MOD_MARK;
+ return size;
+}
- for (i = 0; i < size; ++i)
- if ((spec[i] | mask[i]) != mask[i])
- return -1;
- }
- if (item->mask) {
- unsigned int i;
- const uint8_t *spec = item->mask;
+/**
+ * Convert the @p action into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param action[in]
+ * Action configuration.
+ * @param flow[in, out]
+ * Pointer to flow structure.
+ * @param flow_size[in]
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param error[int, out]
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p action has fully been
+ * converted, otherwise another call with this returned memory size should
+ * be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_action_count(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ struct rte_flow *flow,
+ const size_t flow_size __rte_unused,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_count *count = action->conf;
+#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
+ unsigned int size = sizeof(struct ibv_flow_spec_counter_action);
+ struct ibv_flow_spec_counter_action counter = {
+ .type = IBV_FLOW_SPEC_ACTION_COUNT,
+ .size = size,
+ };
+#endif
- for (i = 0; i < size; ++i)
- if ((spec[i] | mask[i]) != mask[i])
- return -1;
+ if (!flow->counter) {
+ flow->counter = mlx5_flow_counter_new(dev, count->shared,
+ count->id);
+ if (!flow->counter)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "cannot get counter"
+ " context.");
}
- if (item->spec && item->last) {
- uint8_t spec[size];
- uint8_t last[size];
- const uint8_t *apply = mask;
- unsigned int i;
+ if (!((struct priv *)dev->data->dev_private)->config.flow_counter_en)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "flow counters are not supported.");
+ flow->modifier |= MLX5_FLOW_MOD_COUNT;
+#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
+ counter.counter_set_handle = flow->counter->cs->handle;
+ if (size <= flow_size)
+ mlx5_flow_spec_verbs_add(flow, &counter, size);
+ return size;
+#endif
+ return 0;
+}
- if (item->mask)
- apply = item->mask;
- for (i = 0; i < size; ++i) {
- spec[i] = ((const uint8_t *)item->spec)[i] & apply[i];
- last[i] = ((const uint8_t *)item->last)[i] & apply[i];
+/**
+ * Convert the @p action into @p flow after ensuring the NIC will understand
+ * and process it correctly.
+ * The conversion is performed action per action, each of them is written into
+ * the @p flow if its size is lesser or equal to @p flow_size.
+ * Validation and memory consumption computation are still performed until the
+ * end of @p action, unless an error is encountered.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device structure.
+ * @param[in] actions
+ * Pointer to flow actions array.
+ * @param[in, out] flow
+ * Pointer to the rte_flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small some
+ * garbage may be present.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p actions has fully been
+ * converted, otherwise another call with this returned memory size should
+ * be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_actions(struct rte_eth_dev *dev,
+ const struct rte_flow_action actions[],
+ struct rte_flow *flow, const size_t flow_size,
+ struct rte_flow_error *error)
+{
+ size_t size = 0;
+ int remain = flow_size;
+ int ret = 0;
+
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_VOID:
+ break;
+ case RTE_FLOW_ACTION_TYPE_FLAG:
+ ret = mlx5_flow_action_flag(actions, flow, remain,
+ error);
+ break;
+ case RTE_FLOW_ACTION_TYPE_MARK:
+ ret = mlx5_flow_action_mark(actions, flow, remain,
+ error);
+ break;
+ case RTE_FLOW_ACTION_TYPE_DROP:
+ ret = mlx5_flow_action_drop(actions, flow, remain,
+ error);
+ break;
+ case RTE_FLOW_ACTION_TYPE_QUEUE:
+ ret = mlx5_flow_action_queue(dev, actions, flow, error);
+ break;
+ case RTE_FLOW_ACTION_TYPE_RSS:
+ ret = mlx5_flow_action_rss(dev, actions, flow, error);
+ break;
+ case RTE_FLOW_ACTION_TYPE_COUNT:
+ ret = mlx5_flow_action_count(dev, actions, flow, remain,
+ error);
+ break;
+ default:
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ actions,
+ "action not supported");
}
- ret = memcmp(spec, last, size);
+ if (ret < 0)
+ return ret;
+ if (remain > ret)
+ remain -= ret;
+ else
+ remain = 0;
+ size += ret;
}
- return ret;
+ if (!flow->fate)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "no fate action found");
+ return size;
}
/**
- * Validate a flow supported by the NIC.
+ * Convert the @p attributes, @p pattern, @p action, into an flow for the NIC
+ * after ensuring the NIC will understand and process it correctly.
+ * The conversion is only performed item/action per item/action, each of
+ * them is written into the @p flow if its size is lesser or equal to @p
+ * flow_size.
+ * Validation and memory consumption computation are still performed until the
+ * end, unless an error is encountered.
*
- * @param priv
- * Pointer to private structure.
- * @param[in] attr
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small some
+ * garbage may be present.
+ * @param[in] attributes
* Flow rule attributes.
* @param[in] pattern
* Pattern specification (list terminated by the END pattern item).
* Associated actions (list terminated by the END action).
* @param[out] error
* Perform verbose error reporting if not NULL.
- * @param[in, out] flow
- * Flow structure to update.
- * @param[in, out] action
- * Action structure to update.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the flow has fully been converted and
+ * can be applied, otherwise another call with this returned memory size
+ * should be done.
+ * On error, a negative errno value is returned and rte_errno is set.
*/
static int
-priv_flow_validate(struct priv *priv,
- const struct rte_flow_attr *attr,
- const struct rte_flow_item items[],
- const struct rte_flow_action actions[],
- struct rte_flow_error *error,
- struct mlx5_flow *flow,
- struct mlx5_flow_action *action)
+mlx5_flow_merge(struct rte_eth_dev *dev, struct rte_flow *flow,
+ const size_t flow_size,
+ const struct rte_flow_attr *attributes,
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
{
- const struct mlx5_flow_items *cur_item = mlx5_flow_items;
-
- (void)priv;
- if (attr->group) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
- NULL,
- "groups are not supported");
- return -rte_errno;
- }
- if (attr->priority) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
- NULL,
- "priorities are not supported");
- return -rte_errno;
- }
- if (attr->egress) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
- NULL,
- "egress is not supported");
- return -rte_errno;
- }
- if (!attr->ingress) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
- NULL,
- "only ingress is supported");
- return -rte_errno;
+ struct rte_flow local_flow = { .layers = 0, };
+ size_t size = sizeof(*flow);
+ union {
+ struct rte_flow_expand_rss buf;
+ uint8_t buffer[2048];
+ } expand_buffer;
+ struct rte_flow_expand_rss *buf = &expand_buffer.buf;
+ struct mlx5_flow_verbs *original_verbs = NULL;
+ size_t original_verbs_size = 0;
+ uint32_t original_layers = 0;
+ int expanded_pattern_idx = 0;
+ int ret;
+ uint32_t i;
+
+ if (size > flow_size)
+ flow = &local_flow;
+ ret = mlx5_flow_attributes(dev, attributes, flow, error);
+ if (ret < 0)
+ return ret;
+ ret = mlx5_flow_actions(dev, actions, &local_flow, 0, error);
+ if (ret < 0)
+ return ret;
+ if (local_flow.rss.types) {
+ ret = rte_flow_expand_rss(buf, sizeof(expand_buffer.buffer),
+ pattern, local_flow.rss.types,
+ mlx5_support_expansion,
+ local_flow.rss.level < 2 ?
+ MLX5_EXPANSION_ROOT :
+ MLX5_EXPANSION_ROOT_OUTER);
+ assert(ret > 0 &&
+ (unsigned int)ret < sizeof(expand_buffer.buffer));
+ } else {
+ buf->entries = 1;
+ buf->entry[0].pattern = (void *)(uintptr_t)pattern;
}
- for (; items->type != RTE_FLOW_ITEM_TYPE_END; ++items) {
- const struct mlx5_flow_items *token = NULL;
- unsigned int i;
- int err;
-
- if (items->type == RTE_FLOW_ITEM_TYPE_VOID)
- continue;
- for (i = 0;
- cur_item->items &&
- cur_item->items[i] != RTE_FLOW_ITEM_TYPE_END;
- ++i) {
- if (cur_item->items[i] == items->type) {
- token = &mlx5_flow_items[items->type];
- break;
+ size += RTE_ALIGN_CEIL(local_flow.rss.queue_num * sizeof(uint16_t),
+ sizeof(void *));
+ if (size <= flow_size)
+ flow->queue = (void *)(flow + 1);
+ LIST_INIT(&flow->verbs);
+ flow->layers = 0;
+ flow->modifier = 0;
+ flow->fate = 0;
+ for (i = 0; i != buf->entries; ++i) {
+ size_t off = size;
+ size_t off2;
+
+ flow->layers = original_layers;
+ size += sizeof(struct ibv_flow_attr) +
+ sizeof(struct mlx5_flow_verbs);
+ off2 = size;
+ if (size < flow_size) {
+ flow->cur_verbs = (void *)((uintptr_t)flow + off);
+ flow->cur_verbs->attr = (void *)(flow->cur_verbs + 1);
+ flow->cur_verbs->specs =
+ (void *)(flow->cur_verbs->attr + 1);
+ }
+ /* First iteration convert the pattern into Verbs. */
+ if (i == 0) {
+ /* Actions don't need to be converted several time. */
+ ret = mlx5_flow_actions(dev, actions, flow,
+ (size < flow_size) ?
+ flow_size - size : 0,
+ error);
+ if (ret < 0)
+ return ret;
+ size += ret;
+ } else {
+ /*
+ * Next iteration means the pattern has already been
+ * converted and an expansion is necessary to match
+ * the user RSS request. For that only the expanded
+ * items will be converted, the common part with the
+ * user pattern are just copied into the next buffer
+ * zone.
+ */
+ size += original_verbs_size;
+ if (size < flow_size) {
+ rte_memcpy(flow->cur_verbs->attr,
+ original_verbs->attr,
+ original_verbs_size +
+ sizeof(struct ibv_flow_attr));
+ flow->cur_verbs->size = original_verbs_size;
}
}
- if (!token)
- goto exit_item_not_supported;
- cur_item = token;
- err = mlx5_flow_item_validate(items,
- (const uint8_t *)cur_item->mask,
- cur_item->mask_sz);
- if (err)
- goto exit_item_not_supported;
- if (flow->ibv_attr && cur_item->convert) {
- err = cur_item->convert(items,
- (cur_item->default_mask ?
- cur_item->default_mask :
- cur_item->mask),
- flow);
- if (err)
- goto exit_item_not_supported;
- } else if (items->type == RTE_FLOW_ITEM_TYPE_VXLAN) {
- if (flow->inner) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- items,
- "cannot recognize multiple"
- " VXLAN encapsulations");
- return -rte_errno;
+ ret = mlx5_flow_items
+ (dev,
+ (const struct rte_flow_item *)
+ &buf->entry[i].pattern[expanded_pattern_idx],
+ flow,
+ (size < flow_size) ? flow_size - size : 0, error);
+ if (ret < 0)
+ return ret;
+ size += ret;
+ if (size <= flow_size) {
+ mlx5_flow_adjust_priority(dev, flow);
+ LIST_INSERT_HEAD(&flow->verbs, flow->cur_verbs, next);
+ }
+ /*
+ * Keep a pointer of the first verbs conversion and the layers
+ * it has encountered.
+ */
+ if (i == 0) {
+ original_verbs = flow->cur_verbs;
+ original_verbs_size = size - off2;
+ original_layers = flow->layers;
+ /*
+ * move the index of the expanded pattern to the
+ * first item not addressed yet.
+ */
+ if (pattern->type == RTE_FLOW_ITEM_TYPE_END) {
+ expanded_pattern_idx++;
+ } else {
+ const struct rte_flow_item *item = pattern;
+
+ for (item = pattern;
+ item->type != RTE_FLOW_ITEM_TYPE_END;
+ ++item)
+ expanded_pattern_idx++;
}
- flow->inner = 1;
}
- flow->offset += cur_item->dst_sz;
}
- for (; actions->type != RTE_FLOW_ACTION_TYPE_END; ++actions) {
- if (actions->type == RTE_FLOW_ACTION_TYPE_VOID) {
+ /* Restore the origin layers in the flow. */
+ flow->layers = original_layers;
+ return size;
+}
+
+/**
+ * Lookup and set the ptype in the data Rx part. A single Ptype can be used,
+ * if several tunnel rules are used on this queue, the tunnel ptype will be
+ * cleared.
+ *
+ * @param rxq_ctrl
+ * Rx queue to update.
+ */
+static void
+mlx5_flow_rxq_tunnel_ptype_update(struct mlx5_rxq_ctrl *rxq_ctrl)
+{
+ unsigned int i;
+ uint32_t tunnel_ptype = 0;
+
+ /* Look up for the ptype to use. */
+ for (i = 0; i != MLX5_FLOW_TUNNEL; ++i) {
+ if (!rxq_ctrl->flow_tunnels_n[i])
continue;
- } else if (actions->type == RTE_FLOW_ACTION_TYPE_DROP) {
- action->drop = 1;
- } else if (actions->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
- const struct rte_flow_action_queue *queue =
- (const struct rte_flow_action_queue *)
- actions->conf;
- uint16_t n;
- uint16_t found = 0;
-
- if (!queue || (queue->index > (priv->rxqs_n - 1)))
- goto exit_action_not_supported;
- for (n = 0; n < action->queues_n; ++n) {
- if (action->queues[n] == queue->index) {
- found = 1;
+ if (!tunnel_ptype) {
+ tunnel_ptype = tunnels_info[i].ptype;
+ } else {
+ tunnel_ptype = 0;
+ break;
+ }
+ }
+ rxq_ctrl->rxq.tunnel = tunnel_ptype;
+}
+
+/**
+ * Set the Rx queue flags (Mark/Flag and Tunnel Ptypes) according to the flow.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Pointer to flow structure.
+ */
+static void
+mlx5_flow_rxq_flags_set(struct rte_eth_dev *dev, struct rte_flow *flow)
+{
+ struct priv *priv = dev->data->dev_private;
+ const int mark = !!(flow->modifier &
+ (MLX5_FLOW_MOD_FLAG | MLX5_FLOW_MOD_MARK));
+ const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+ unsigned int i;
+
+ for (i = 0; i != flow->rss.queue_num; ++i) {
+ int idx = (*flow->queue)[i];
+ struct mlx5_rxq_ctrl *rxq_ctrl =
+ container_of((*priv->rxqs)[idx],
+ struct mlx5_rxq_ctrl, rxq);
+
+ if (mark) {
+ rxq_ctrl->rxq.mark = 1;
+ rxq_ctrl->flow_mark_n++;
+ }
+ if (tunnel) {
+ unsigned int j;
+
+ /* Increase the counter matching the flow. */
+ for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
+ if ((tunnels_info[j].tunnel & flow->layers) ==
+ tunnels_info[j].tunnel) {
+ rxq_ctrl->flow_tunnels_n[j]++;
break;
}
}
- if (action->queues_n > 1 && !found) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- actions,
- "queue action not in RSS queues");
- return -rte_errno;
- }
- if (!found) {
- action->queue = 1;
- action->queues_n = 1;
- action->queues[0] = queue->index;
- }
- } else if (actions->type == RTE_FLOW_ACTION_TYPE_RSS) {
- const struct rte_flow_action_rss *rss =
- (const struct rte_flow_action_rss *)
- actions->conf;
- uint16_t n;
-
- if (action->queues_n == 1) {
- uint16_t found = 0;
-
- assert(action->queues_n);
- for (n = 0; n < rss->num; ++n) {
- if (action->queues[0] ==
- rss->queue[n]) {
- found = 1;
- break;
- }
- }
- if (!found) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- actions,
- "queue action not in RSS"
- " queues");
- return -rte_errno;
- }
- }
- for (n = 0; n < rss->num; ++n) {
- if (rss->queue[n] >= priv->rxqs_n) {
- rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION,
- actions,
- "queue id > number of"
- " queues");
- return -rte_errno;
+ mlx5_flow_rxq_tunnel_ptype_update(rxq_ctrl);
+ }
+ }
+}
+
+/**
+ * Clear the Rx queue flags (Mark/Flag and Tunnel Ptype) associated with the
+ * @p flow if no other flow uses it with the same kind of request.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Pointer to the flow.
+ */
+static void
+mlx5_flow_rxq_flags_trim(struct rte_eth_dev *dev, struct rte_flow *flow)
+{
+ struct priv *priv = dev->data->dev_private;
+ const int mark = !!(flow->modifier &
+ (MLX5_FLOW_MOD_FLAG | MLX5_FLOW_MOD_MARK));
+ const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+ unsigned int i;
+
+ assert(dev->data->dev_started);
+ for (i = 0; i != flow->rss.queue_num; ++i) {
+ int idx = (*flow->queue)[i];
+ struct mlx5_rxq_ctrl *rxq_ctrl =
+ container_of((*priv->rxqs)[idx],
+ struct mlx5_rxq_ctrl, rxq);
+
+ if (mark) {
+ rxq_ctrl->flow_mark_n--;
+ rxq_ctrl->rxq.mark = !!rxq_ctrl->flow_mark_n;
+ }
+ if (tunnel) {
+ unsigned int j;
+
+ /* Decrease the counter matching the flow. */
+ for (j = 0; j != MLX5_FLOW_TUNNEL; ++j) {
+ if ((tunnels_info[j].tunnel & flow->layers) ==
+ tunnels_info[j].tunnel) {
+ rxq_ctrl->flow_tunnels_n[j]--;
+ break;
}
}
- action->queue = 1;
- for (n = 0; n < rss->num; ++n)
- action->queues[n] = rss->queue[n];
- action->queues_n = rss->num;
- } else if (actions->type == RTE_FLOW_ACTION_TYPE_MARK) {
- const struct rte_flow_action_mark *mark =
- (const struct rte_flow_action_mark *)
- actions->conf;
-
- if (!mark) {
- rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION,
- actions,
- "mark must be defined");
- return -rte_errno;
- } else if (mark->id >= MLX5_FLOW_MARK_MAX) {
- rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- actions,
- "mark must be between 0"
- " and 16777199");
- return -rte_errno;
- }
- action->mark = 1;
- action->mark_id = mark->id;
- } else if (actions->type == RTE_FLOW_ACTION_TYPE_FLAG) {
- action->mark = 1;
- } else {
- goto exit_action_not_supported;
+ mlx5_flow_rxq_tunnel_ptype_update(rxq_ctrl);
}
}
- if (action->mark && !flow->ibv_attr && !action->drop)
- flow->offset += sizeof(struct ibv_exp_flow_spec_action_tag);
- if (!action->queue && !action->drop) {
- rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_HANDLE,
- NULL, "no valid action");
- return -rte_errno;
+}
+
+/**
+ * Clear the Mark/Flag and Tunnel ptype information in all Rx queues.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ */
+static void
+mlx5_flow_rxq_flags_clear(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+ unsigned int idx;
+
+ for (idx = 0, i = 0; idx != priv->rxqs_n; ++i) {
+ struct mlx5_rxq_ctrl *rxq_ctrl;
+ unsigned int j;
+
+ if (!(*priv->rxqs)[idx])
+ continue;
+ rxq_ctrl = container_of((*priv->rxqs)[idx],
+ struct mlx5_rxq_ctrl, rxq);
+ rxq_ctrl->flow_mark_n = 0;
+ rxq_ctrl->rxq.mark = 0;
+ for (j = 0; j != MLX5_FLOW_TUNNEL; ++j)
+ rxq_ctrl->flow_tunnels_n[j] = 0;
+ rxq_ctrl->rxq.tunnel = 0;
+ ++idx;
}
- return 0;
-exit_item_not_supported:
- rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM,
- items, "item not supported");
- return -rte_errno;
-exit_action_not_supported:
- rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
- actions, "action not supported");
- return -rte_errno;
}
/**
const struct rte_flow_action actions[],
struct rte_flow_error *error)
{
- struct priv *priv = dev->data->dev_private;
- int ret;
- struct mlx5_flow flow = { .offset = sizeof(struct ibv_exp_flow_attr) };
- struct mlx5_flow_action action = {
- .queue = 0,
- .drop = 0,
- .mark = 0,
- .mark_id = MLX5_FLOW_MARK_DEFAULT,
- .queues_n = 0,
- };
+ int ret = mlx5_flow_merge(dev, NULL, 0, attr, items, actions, error);
- priv_lock(priv);
- ret = priv_flow_validate(priv, attr, items, actions, error, &flow,
- &action);
- priv_unlock(priv);
- return ret;
+ if (ret < 0)
+ return ret;
+ return 0;
}
/**
- * Convert Ethernet item to Verbs specification.
+ * Remove the flow.
*
- * @param item[in]
- * Item specification.
- * @param default_mask[in]
- * Default bit-masks to use when item->mask is not provided.
- * @param data[in, out]
- * User structure.
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ * @param[in, out] flow
+ * Pointer to flow structure.
*/
-static int
-mlx5_flow_create_eth(const struct rte_flow_item *item,
- const void *default_mask,
- void *data)
+static void
+mlx5_flow_remove(struct rte_eth_dev *dev, struct rte_flow *flow)
{
- const struct rte_flow_item_eth *spec = item->spec;
- const struct rte_flow_item_eth *mask = item->mask;
- struct mlx5_flow *flow = (struct mlx5_flow *)data;
- struct ibv_exp_flow_spec_eth *eth;
- const unsigned int eth_size = sizeof(struct ibv_exp_flow_spec_eth);
- unsigned int i;
+ struct mlx5_flow_verbs *verbs;
- ++flow->ibv_attr->num_of_specs;
- flow->ibv_attr->priority = 2;
- flow->hash_fields = 0;
- eth = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
- *eth = (struct ibv_exp_flow_spec_eth) {
- .type = flow->inner | IBV_EXP_FLOW_SPEC_ETH,
- .size = eth_size,
- };
- if (!spec)
- return 0;
- if (!mask)
- mask = default_mask;
- memcpy(eth->val.dst_mac, spec->dst.addr_bytes, ETHER_ADDR_LEN);
- memcpy(eth->val.src_mac, spec->src.addr_bytes, ETHER_ADDR_LEN);
- eth->val.ether_type = spec->type;
- memcpy(eth->mask.dst_mac, mask->dst.addr_bytes, ETHER_ADDR_LEN);
- memcpy(eth->mask.src_mac, mask->src.addr_bytes, ETHER_ADDR_LEN);
- eth->mask.ether_type = mask->type;
- /* Remove unwanted bits from values. */
- for (i = 0; i < ETHER_ADDR_LEN; ++i) {
- eth->val.dst_mac[i] &= eth->mask.dst_mac[i];
- eth->val.src_mac[i] &= eth->mask.src_mac[i];
- }
- eth->val.ether_type &= eth->mask.ether_type;
- return 0;
+ LIST_FOREACH(verbs, &flow->verbs, next) {
+ if (verbs->flow) {
+ claim_zero(mlx5_glue->destroy_flow(verbs->flow));
+ verbs->flow = NULL;
+ }
+ if (verbs->hrxq) {
+ if (flow->fate & MLX5_FLOW_FATE_DROP)
+ mlx5_hrxq_drop_release(dev);
+ else
+ mlx5_hrxq_release(dev, verbs->hrxq);
+ verbs->hrxq = NULL;
+ }
+ }
+ if (flow->counter) {
+ mlx5_flow_counter_release(flow->counter);
+ flow->counter = NULL;
+ }
}
/**
- * Convert VLAN item to Verbs specification.
+ * Apply the flow.
*
- * @param item[in]
- * Item specification.
- * @param default_mask[in]
- * Default bit-masks to use when item->mask is not provided.
- * @param data[in, out]
- * User structure.
+ * @param[in] dev
+ * Pointer to Ethernet device structure.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-mlx5_flow_create_vlan(const struct rte_flow_item *item,
- const void *default_mask,
- void *data)
+mlx5_flow_apply(struct rte_eth_dev *dev, struct rte_flow *flow,
+ struct rte_flow_error *error)
{
- const struct rte_flow_item_vlan *spec = item->spec;
- const struct rte_flow_item_vlan *mask = item->mask;
- struct mlx5_flow *flow = (struct mlx5_flow *)data;
- struct ibv_exp_flow_spec_eth *eth;
- const unsigned int eth_size = sizeof(struct ibv_exp_flow_spec_eth);
+ struct mlx5_flow_verbs *verbs;
+ int err;
- eth = (void *)((uintptr_t)flow->ibv_attr + flow->offset - eth_size);
- if (!spec)
- return 0;
- if (!mask)
- mask = default_mask;
- eth->val.vlan_tag = spec->tci;
- eth->mask.vlan_tag = mask->tci;
- eth->val.vlan_tag &= eth->mask.vlan_tag;
+ LIST_FOREACH(verbs, &flow->verbs, next) {
+ if (flow->fate & MLX5_FLOW_FATE_DROP) {
+ verbs->hrxq = mlx5_hrxq_drop_new(dev);
+ if (!verbs->hrxq) {
+ rte_flow_error_set
+ (error, errno,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "cannot get drop hash queue");
+ goto error;
+ }
+ } else {
+ struct mlx5_hrxq *hrxq;
+
+ hrxq = mlx5_hrxq_get(dev, flow->key,
+ MLX5_RSS_HASH_KEY_LEN,
+ verbs->hash_fields,
+ (*flow->queue),
+ flow->rss.queue_num);
+ if (!hrxq)
+ hrxq = mlx5_hrxq_new(dev, flow->key,
+ MLX5_RSS_HASH_KEY_LEN,
+ verbs->hash_fields,
+ (*flow->queue),
+ flow->rss.queue_num);
+ if (!hrxq) {
+ rte_flow_error_set
+ (error, rte_errno,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "cannot get hash queue");
+ goto error;
+ }
+ verbs->hrxq = hrxq;
+ }
+ verbs->flow =
+ mlx5_glue->create_flow(verbs->hrxq->qp, verbs->attr);
+ if (!verbs->flow) {
+ rte_flow_error_set(error, errno,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "hardware refuses to create flow");
+ goto error;
+ }
+ }
return 0;
+error:
+ err = rte_errno; /* Save rte_errno before cleanup. */
+ LIST_FOREACH(verbs, &flow->verbs, next) {
+ if (verbs->hrxq) {
+ if (flow->fate & MLX5_FLOW_FATE_DROP)
+ mlx5_hrxq_drop_release(dev);
+ else
+ mlx5_hrxq_release(dev, verbs->hrxq);
+ verbs->hrxq = NULL;
+ }
+ }
+ rte_errno = err; /* Restore rte_errno. */
+ return -rte_errno;
}
/**
- * Convert IPv4 item to Verbs specification.
+ * Create a flow and add it to @p list.
*
- * @param item[in]
- * Item specification.
- * @param default_mask[in]
- * Default bit-masks to use when item->mask is not provided.
- * @param data[in, out]
- * User structure.
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param list
+ * Pointer to a TAILQ flow list.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * A flow on success, NULL otherwise and rte_errno is set.
*/
-static int
-mlx5_flow_create_ipv4(const struct rte_flow_item *item,
- const void *default_mask,
- void *data)
+static struct rte_flow *
+mlx5_flow_list_create(struct rte_eth_dev *dev,
+ struct mlx5_flows *list,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
{
- const struct rte_flow_item_ipv4 *spec = item->spec;
- const struct rte_flow_item_ipv4 *mask = item->mask;
- struct mlx5_flow *flow = (struct mlx5_flow *)data;
- struct ibv_exp_flow_spec_ipv4_ext *ipv4;
- unsigned int ipv4_size = sizeof(struct ibv_exp_flow_spec_ipv4_ext);
-
- ++flow->ibv_attr->num_of_specs;
- flow->ibv_attr->priority = 1;
- flow->hash_fields = (IBV_EXP_RX_HASH_SRC_IPV4 |
- IBV_EXP_RX_HASH_DST_IPV4);
- ipv4 = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
- *ipv4 = (struct ibv_exp_flow_spec_ipv4_ext) {
- .type = flow->inner | IBV_EXP_FLOW_SPEC_IPV4_EXT,
- .size = ipv4_size,
- };
- if (!spec)
- return 0;
- if (!mask)
- mask = default_mask;
- ipv4->val = (struct ibv_exp_flow_ipv4_ext_filter){
- .src_ip = spec->hdr.src_addr,
- .dst_ip = spec->hdr.dst_addr,
- .proto = spec->hdr.next_proto_id,
- .tos = spec->hdr.type_of_service,
- };
- ipv4->mask = (struct ibv_exp_flow_ipv4_ext_filter){
- .src_ip = mask->hdr.src_addr,
- .dst_ip = mask->hdr.dst_addr,
- .proto = mask->hdr.next_proto_id,
- .tos = mask->hdr.type_of_service,
- };
- /* Remove unwanted bits from values. */
- ipv4->val.src_ip &= ipv4->mask.src_ip;
- ipv4->val.dst_ip &= ipv4->mask.dst_ip;
- ipv4->val.proto &= ipv4->mask.proto;
- ipv4->val.tos &= ipv4->mask.tos;
- return 0;
+ struct rte_flow *flow = NULL;
+ size_t size = 0;
+ int ret;
+
+ ret = mlx5_flow_merge(dev, flow, size, attr, items, actions, error);
+ if (ret < 0)
+ return NULL;
+ size = ret;
+ flow = rte_calloc(__func__, 1, size, 0);
+ if (!flow) {
+ rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "not enough memory to create flow");
+ return NULL;
+ }
+ ret = mlx5_flow_merge(dev, flow, size, attr, items, actions, error);
+ if (ret < 0) {
+ rte_free(flow);
+ return NULL;
+ }
+ assert((size_t)ret == size);
+ if (dev->data->dev_started) {
+ ret = mlx5_flow_apply(dev, flow, error);
+ if (ret < 0) {
+ ret = rte_errno; /* Save rte_errno before cleanup. */
+ if (flow) {
+ mlx5_flow_remove(dev, flow);
+ rte_free(flow);
+ }
+ rte_errno = ret; /* Restore rte_errno. */
+ return NULL;
+ }
+ }
+ TAILQ_INSERT_TAIL(list, flow, next);
+ mlx5_flow_rxq_flags_set(dev, flow);
+ return flow;
}
/**
- * Convert IPv6 item to Verbs specification.
+ * Create a flow.
*
- * @param item[in]
- * Item specification.
- * @param default_mask[in]
- * Default bit-masks to use when item->mask is not provided.
- * @param data[in, out]
- * User structure.
+ * @see rte_flow_create()
+ * @see rte_flow_ops
*/
-static int
-mlx5_flow_create_ipv6(const struct rte_flow_item *item,
- const void *default_mask,
- void *data)
+struct rte_flow *
+mlx5_flow_create(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
{
- const struct rte_flow_item_ipv6 *spec = item->spec;
- const struct rte_flow_item_ipv6 *mask = item->mask;
- struct mlx5_flow *flow = (struct mlx5_flow *)data;
- struct ibv_exp_flow_spec_ipv6_ext *ipv6;
- unsigned int ipv6_size = sizeof(struct ibv_exp_flow_spec_ipv6_ext);
-
- ++flow->ibv_attr->num_of_specs;
- flow->ibv_attr->priority = 1;
- flow->hash_fields = (IBV_EXP_RX_HASH_SRC_IPV6 |
- IBV_EXP_RX_HASH_DST_IPV6);
- ipv6 = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
- *ipv6 = (struct ibv_exp_flow_spec_ipv6_ext) {
- .type = flow->inner | IBV_EXP_FLOW_SPEC_IPV6_EXT,
- .size = ipv6_size,
- };
- if (!spec)
- return 0;
- if (!mask)
- mask = default_mask;
- memcpy(ipv6->val.src_ip, spec->hdr.src_addr,
- RTE_DIM(ipv6->val.src_ip));
- memcpy(ipv6->val.dst_ip, spec->hdr.dst_addr,
- RTE_DIM(ipv6->val.dst_ip));
- memcpy(ipv6->mask.src_ip, mask->hdr.src_addr,
- RTE_DIM(ipv6->mask.src_ip));
- memcpy(ipv6->mask.dst_ip, mask->hdr.dst_addr,
- RTE_DIM(ipv6->mask.dst_ip));
- ipv6->mask.flow_label = mask->hdr.vtc_flow;
- ipv6->mask.next_hdr = mask->hdr.proto;
- ipv6->mask.hop_limit = mask->hdr.hop_limits;
- ipv6->val.flow_label &= ipv6->mask.flow_label;
- ipv6->val.next_hdr &= ipv6->mask.next_hdr;
- ipv6->val.hop_limit &= ipv6->mask.hop_limit;
- return 0;
+ return mlx5_flow_list_create
+ (dev, &((struct priv *)dev->data->dev_private)->flows,
+ attr, items, actions, error);
}
/**
- * Convert UDP item to Verbs specification.
+ * Destroy a flow in a list.
*
- * @param item[in]
- * Item specification.
- * @param default_mask[in]
- * Default bit-masks to use when item->mask is not provided.
- * @param data[in, out]
- * User structure.
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param list
+ * Pointer to a TAILQ flow list.
+ * @param[in] flow
+ * Flow to destroy.
*/
-static int
-mlx5_flow_create_udp(const struct rte_flow_item *item,
- const void *default_mask,
- void *data)
+static void
+mlx5_flow_list_destroy(struct rte_eth_dev *dev, struct mlx5_flows *list,
+ struct rte_flow *flow)
{
- const struct rte_flow_item_udp *spec = item->spec;
- const struct rte_flow_item_udp *mask = item->mask;
- struct mlx5_flow *flow = (struct mlx5_flow *)data;
- struct ibv_exp_flow_spec_tcp_udp *udp;
- unsigned int udp_size = sizeof(struct ibv_exp_flow_spec_tcp_udp);
-
- ++flow->ibv_attr->num_of_specs;
- flow->ibv_attr->priority = 0;
- flow->hash_fields |= (IBV_EXP_RX_HASH_SRC_PORT_UDP |
- IBV_EXP_RX_HASH_DST_PORT_UDP);
- udp = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
- *udp = (struct ibv_exp_flow_spec_tcp_udp) {
- .type = flow->inner | IBV_EXP_FLOW_SPEC_UDP,
- .size = udp_size,
- };
- if (!spec)
- return 0;
- if (!mask)
- mask = default_mask;
- udp->val.dst_port = spec->hdr.dst_port;
- udp->val.src_port = spec->hdr.src_port;
- udp->mask.dst_port = mask->hdr.dst_port;
- udp->mask.src_port = mask->hdr.src_port;
- /* Remove unwanted bits from values. */
- udp->val.src_port &= udp->mask.src_port;
- udp->val.dst_port &= udp->mask.dst_port;
- return 0;
+ mlx5_flow_remove(dev, flow);
+ TAILQ_REMOVE(list, flow, next);
+ /*
+ * Update RX queue flags only if port is started, otherwise it is
+ * already clean.
+ */
+ if (dev->data->dev_started)
+ mlx5_flow_rxq_flags_trim(dev, flow);
+ rte_free(flow);
}
/**
- * Convert TCP item to Verbs specification.
+ * Destroy all flows.
*
- * @param item[in]
- * Item specification.
- * @param default_mask[in]
- * Default bit-masks to use when item->mask is not provided.
- * @param data[in, out]
- * User structure.
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param list
+ * Pointer to a TAILQ flow list.
*/
-static int
-mlx5_flow_create_tcp(const struct rte_flow_item *item,
- const void *default_mask,
- void *data)
+void
+mlx5_flow_list_flush(struct rte_eth_dev *dev, struct mlx5_flows *list)
{
- const struct rte_flow_item_tcp *spec = item->spec;
- const struct rte_flow_item_tcp *mask = item->mask;
- struct mlx5_flow *flow = (struct mlx5_flow *)data;
- struct ibv_exp_flow_spec_tcp_udp *tcp;
- unsigned int tcp_size = sizeof(struct ibv_exp_flow_spec_tcp_udp);
-
- ++flow->ibv_attr->num_of_specs;
- flow->ibv_attr->priority = 0;
- flow->hash_fields |= (IBV_EXP_RX_HASH_SRC_PORT_TCP |
- IBV_EXP_RX_HASH_DST_PORT_TCP);
- tcp = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
- *tcp = (struct ibv_exp_flow_spec_tcp_udp) {
- .type = flow->inner | IBV_EXP_FLOW_SPEC_TCP,
- .size = tcp_size,
- };
- if (!spec)
- return 0;
- if (!mask)
- mask = default_mask;
- tcp->val.dst_port = spec->hdr.dst_port;
- tcp->val.src_port = spec->hdr.src_port;
- tcp->mask.dst_port = mask->hdr.dst_port;
- tcp->mask.src_port = mask->hdr.src_port;
- /* Remove unwanted bits from values. */
- tcp->val.src_port &= tcp->mask.src_port;
- tcp->val.dst_port &= tcp->mask.dst_port;
- return 0;
+ while (!TAILQ_EMPTY(list)) {
+ struct rte_flow *flow;
+
+ flow = TAILQ_FIRST(list);
+ mlx5_flow_list_destroy(dev, list, flow);
+ }
}
/**
- * Convert VXLAN item to Verbs specification.
+ * Remove all flows.
*
- * @param item[in]
- * Item specification.
- * @param default_mask[in]
- * Default bit-masks to use when item->mask is not provided.
- * @param data[in, out]
- * User structure.
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param list
+ * Pointer to a TAILQ flow list.
*/
-static int
-mlx5_flow_create_vxlan(const struct rte_flow_item *item,
- const void *default_mask,
- void *data)
+void
+mlx5_flow_stop(struct rte_eth_dev *dev, struct mlx5_flows *list)
{
- const struct rte_flow_item_vxlan *spec = item->spec;
- const struct rte_flow_item_vxlan *mask = item->mask;
- struct mlx5_flow *flow = (struct mlx5_flow *)data;
- struct ibv_exp_flow_spec_tunnel *vxlan;
- unsigned int size = sizeof(struct ibv_exp_flow_spec_tunnel);
- union vni {
- uint32_t vlan_id;
- uint8_t vni[4];
- } id;
-
- ++flow->ibv_attr->num_of_specs;
- flow->ibv_attr->priority = 0;
- id.vni[0] = 0;
- vxlan = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
- *vxlan = (struct ibv_exp_flow_spec_tunnel) {
- .type = flow->inner | IBV_EXP_FLOW_SPEC_VXLAN_TUNNEL,
- .size = size,
- };
- flow->inner = IBV_EXP_FLOW_SPEC_INNER;
- if (!spec)
- return 0;
- if (!mask)
- mask = default_mask;
- memcpy(&id.vni[1], spec->vni, 3);
- vxlan->val.tunnel_id = id.vlan_id;
- memcpy(&id.vni[1], mask->vni, 3);
- vxlan->mask.tunnel_id = id.vlan_id;
- /* Remove unwanted bits from values. */
- vxlan->val.tunnel_id &= vxlan->mask.tunnel_id;
- return 0;
+ struct rte_flow *flow;
+
+ TAILQ_FOREACH_REVERSE(flow, list, mlx5_flows, next)
+ mlx5_flow_remove(dev, flow);
+ mlx5_flow_rxq_flags_clear(dev);
}
/**
- * Convert mark/flag action to Verbs specification.
+ * Add all flows.
*
- * @param flow
- * Pointer to MLX5 flow structure.
- * @param mark_id
- * Mark identifier.
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param list
+ * Pointer to a TAILQ flow list.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static int
-mlx5_flow_create_flag_mark(struct mlx5_flow *flow, uint32_t mark_id)
+int
+mlx5_flow_start(struct rte_eth_dev *dev, struct mlx5_flows *list)
{
- struct ibv_exp_flow_spec_action_tag *tag;
- unsigned int size = sizeof(struct ibv_exp_flow_spec_action_tag);
+ struct rte_flow *flow;
+ struct rte_flow_error error;
+ int ret = 0;
- tag = (void *)((uintptr_t)flow->ibv_attr + flow->offset);
- *tag = (struct ibv_exp_flow_spec_action_tag){
- .type = IBV_EXP_FLOW_SPEC_ACTION_TAG,
- .size = size,
- .tag_id = mlx5_flow_mark_set(mark_id),
- };
- ++flow->ibv_attr->num_of_specs;
+ TAILQ_FOREACH(flow, list, next) {
+ ret = mlx5_flow_apply(dev, flow, &error);
+ if (ret < 0)
+ goto error;
+ mlx5_flow_rxq_flags_set(dev, flow);
+ }
return 0;
+error:
+ ret = rte_errno; /* Save rte_errno before cleanup. */
+ mlx5_flow_stop(dev, list);
+ rte_errno = ret; /* Restore rte_errno. */
+ return -rte_errno;
}
/**
- * Complete flow rule creation with a drop queue.
+ * Verify the flow list is empty
*
- * @param priv
- * Pointer to private structure.
- * @param flow
- * MLX5 flow attributes (filled by mlx5_flow_validate()).
- * @param[out] error
- * Perform verbose error reporting if not NULL.
+ * @param dev
+ * Pointer to Ethernet device.
*
- * @return
- * A flow if the rule could be created.
+ * @return the number of flows not released.
*/
-static struct rte_flow *
-priv_flow_create_action_queue_drop(struct priv *priv,
- struct mlx5_flow *flow,
- struct rte_flow_error *error)
+int
+mlx5_flow_verify(struct rte_eth_dev *dev)
{
- struct rte_flow *rte_flow;
-
- assert(priv->pd);
- assert(priv->ctx);
- rte_flow = rte_calloc(__func__, 1, sizeof(*rte_flow), 0);
- if (!rte_flow) {
- rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
- NULL, "cannot allocate flow memory");
- return NULL;
+ struct priv *priv = dev->data->dev_private;
+ struct rte_flow *flow;
+ int ret = 0;
+
+ TAILQ_FOREACH(flow, &priv->flows, next) {
+ DRV_LOG(DEBUG, "port %u flow %p still referenced",
+ dev->data->port_id, (void *)flow);
+ ++ret;
}
- rte_flow->drop = 1;
- rte_flow->ibv_attr = flow->ibv_attr;
- rte_flow->qp = priv->flow_drop_queue->qp;
- if (!priv->started)
- return rte_flow;
- rte_flow->ibv_flow = ibv_exp_create_flow(rte_flow->qp,
- rte_flow->ibv_attr);
- if (!rte_flow->ibv_flow) {
- rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
- NULL, "flow rule creation failure");
- goto error;
- }
- return rte_flow;
-error:
- assert(rte_flow);
- rte_free(rte_flow);
- return NULL;
+ return ret;
}
/**
- * Complete flow rule creation.
+ * Enable a control flow configured from the control plane.
*
- * @param priv
- * Pointer to private structure.
- * @param flow
- * MLX5 flow attributes (filled by mlx5_flow_validate()).
- * @param action
- * Target action structure.
- * @param[out] error
- * Perform verbose error reporting if not NULL.
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param eth_spec
+ * An Ethernet flow spec to apply.
+ * @param eth_mask
+ * An Ethernet flow mask to apply.
+ * @param vlan_spec
+ * A VLAN flow spec to apply.
+ * @param vlan_mask
+ * A VLAN flow mask to apply.
*
* @return
- * A flow if the rule could be created.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static struct rte_flow *
-priv_flow_create_action_queue(struct priv *priv,
- struct mlx5_flow *flow,
- struct mlx5_flow_action *action,
- struct rte_flow_error *error)
+int
+mlx5_ctrl_flow_vlan(struct rte_eth_dev *dev,
+ struct rte_flow_item_eth *eth_spec,
+ struct rte_flow_item_eth *eth_mask,
+ struct rte_flow_item_vlan *vlan_spec,
+ struct rte_flow_item_vlan *vlan_mask)
{
- struct rte_flow *rte_flow;
+ struct priv *priv = dev->data->dev_private;
+ const struct rte_flow_attr attr = {
+ .ingress = 1,
+ .priority = MLX5_FLOW_PRIO_RSVD,
+ };
+ struct rte_flow_item items[] = {
+ {
+ .type = RTE_FLOW_ITEM_TYPE_ETH,
+ .spec = eth_spec,
+ .last = NULL,
+ .mask = eth_mask,
+ },
+ {
+ .type = (vlan_spec) ? RTE_FLOW_ITEM_TYPE_VLAN :
+ RTE_FLOW_ITEM_TYPE_END,
+ .spec = vlan_spec,
+ .last = NULL,
+ .mask = vlan_mask,
+ },
+ {
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ },
+ };
+ uint16_t queue[priv->reta_idx_n];
+ struct rte_flow_action_rss action_rss = {
+ .func = RTE_ETH_HASH_FUNCTION_DEFAULT,
+ .level = 0,
+ .types = priv->rss_conf.rss_hf,
+ .key_len = priv->rss_conf.rss_key_len,
+ .queue_num = priv->reta_idx_n,
+ .key = priv->rss_conf.rss_key,
+ .queue = queue,
+ };
+ struct rte_flow_action actions[] = {
+ {
+ .type = RTE_FLOW_ACTION_TYPE_RSS,
+ .conf = &action_rss,
+ },
+ {
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ },
+ };
+ struct rte_flow *flow;
+ struct rte_flow_error error;
unsigned int i;
- unsigned int j;
- const unsigned int wqs_n = 1 << log2above(action->queues_n);
- struct ibv_exp_wq *wqs[wqs_n];
-
- assert(priv->pd);
- assert(priv->ctx);
- assert(!action->drop);
- rte_flow = rte_calloc(__func__, 1, sizeof(*rte_flow) +
- sizeof(*rte_flow->rxqs) * action->queues_n, 0);
- if (!rte_flow) {
- rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
- NULL, "cannot allocate flow memory");
- return NULL;
+
+ if (!priv->reta_idx_n) {
+ rte_errno = EINVAL;
+ return -rte_errno;
}
- for (i = 0; i < action->queues_n; ++i) {
- struct rxq_ctrl *rxq;
-
- rxq = container_of((*priv->rxqs)[action->queues[i]],
- struct rxq_ctrl, rxq);
- wqs[i] = rxq->wq;
- rte_flow->rxqs[i] = &rxq->rxq;
- ++rte_flow->rxqs_n;
- rxq->rxq.mark |= action->mark;
- }
- /* finalise indirection table. */
- for (j = 0; i < wqs_n; ++i, ++j) {
- wqs[i] = wqs[j];
- if (j == action->queues_n)
- j = 0;
- }
- rte_flow->mark = action->mark;
- rte_flow->ibv_attr = flow->ibv_attr;
- rte_flow->hash_fields = flow->hash_fields;
- rte_flow->ind_table = ibv_exp_create_rwq_ind_table(
- priv->ctx,
- &(struct ibv_exp_rwq_ind_table_init_attr){
- .pd = priv->pd,
- .log_ind_tbl_size = log2above(action->queues_n),
- .ind_tbl = wqs,
- .comp_mask = 0,
- });
- if (!rte_flow->ind_table) {
- rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
- NULL, "cannot allocate indirection table");
- goto error;
- }
- rte_flow->qp = ibv_exp_create_qp(
- priv->ctx,
- &(struct ibv_exp_qp_init_attr){
- .qp_type = IBV_QPT_RAW_PACKET,
- .comp_mask =
- IBV_EXP_QP_INIT_ATTR_PD |
- IBV_EXP_QP_INIT_ATTR_PORT |
- IBV_EXP_QP_INIT_ATTR_RX_HASH,
- .pd = priv->pd,
- .rx_hash_conf = &(struct ibv_exp_rx_hash_conf){
- .rx_hash_function =
- IBV_EXP_RX_HASH_FUNC_TOEPLITZ,
- .rx_hash_key_len = rss_hash_default_key_len,
- .rx_hash_key = rss_hash_default_key,
- .rx_hash_fields_mask = rte_flow->hash_fields,
- .rwq_ind_tbl = rte_flow->ind_table,
- },
- .port_num = priv->port,
- });
- if (!rte_flow->qp) {
- rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
- NULL, "cannot allocate QP");
- goto error;
- }
- if (!priv->started)
- return rte_flow;
- rte_flow->ibv_flow = ibv_exp_create_flow(rte_flow->qp,
- rte_flow->ibv_attr);
- if (!rte_flow->ibv_flow) {
- rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
- NULL, "flow rule creation failure");
- goto error;
- }
- return rte_flow;
-error:
- assert(rte_flow);
- if (rte_flow->qp)
- ibv_destroy_qp(rte_flow->qp);
- if (rte_flow->ind_table)
- ibv_exp_destroy_rwq_ind_table(rte_flow->ind_table);
- rte_free(rte_flow);
- return NULL;
+ for (i = 0; i != priv->reta_idx_n; ++i)
+ queue[i] = (*priv->reta_idx)[i];
+ flow = mlx5_flow_list_create(dev, &priv->ctrl_flows, &attr, items,
+ actions, &error);
+ if (!flow)
+ return -rte_errno;
+ return 0;
}
/**
- * Convert a flow.
+ * Enable a flow control configured from the control plane.
*
- * @param priv
- * Pointer to private structure.
- * @param[in] attr
- * Flow rule attributes.
- * @param[in] pattern
- * Pattern specification (list terminated by the END pattern item).
- * @param[in] actions
- * Associated actions (list terminated by the END action).
- * @param[out] error
- * Perform verbose error reporting if not NULL.
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param eth_spec
+ * An Ethernet flow spec to apply.
+ * @param eth_mask
+ * An Ethernet flow mask to apply.
*
* @return
- * A flow on success, NULL otherwise.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static struct rte_flow *
-priv_flow_create(struct priv *priv,
- const struct rte_flow_attr *attr,
- const struct rte_flow_item items[],
- const struct rte_flow_action actions[],
- struct rte_flow_error *error)
+int
+mlx5_ctrl_flow(struct rte_eth_dev *dev,
+ struct rte_flow_item_eth *eth_spec,
+ struct rte_flow_item_eth *eth_mask)
{
- struct rte_flow *rte_flow;
- struct mlx5_flow flow = { .offset = sizeof(struct ibv_exp_flow_attr), };
- struct mlx5_flow_action action = {
- .queue = 0,
- .drop = 0,
- .mark = 0,
- .mark_id = MLX5_FLOW_MARK_DEFAULT,
- .queues_n = 0,
- };
- int err;
-
- err = priv_flow_validate(priv, attr, items, actions, error, &flow,
- &action);
- if (err)
- goto exit;
- flow.ibv_attr = rte_malloc(__func__, flow.offset, 0);
- flow.offset = sizeof(struct ibv_exp_flow_attr);
- if (!flow.ibv_attr) {
- rte_flow_error_set(error, ENOMEM, RTE_FLOW_ERROR_TYPE_HANDLE,
- NULL, "cannot allocate ibv_attr memory");
- goto exit;
- }
- *flow.ibv_attr = (struct ibv_exp_flow_attr){
- .type = IBV_EXP_FLOW_ATTR_NORMAL,
- .size = sizeof(struct ibv_exp_flow_attr),
- .priority = attr->priority,
- .num_of_specs = 0,
- .port = 0,
- .flags = 0,
- .reserved = 0,
- };
- flow.inner = 0;
- flow.hash_fields = 0;
- claim_zero(priv_flow_validate(priv, attr, items, actions,
- error, &flow, &action));
- if (action.mark && !action.drop) {
- mlx5_flow_create_flag_mark(&flow, action.mark_id);
- flow.offset += sizeof(struct ibv_exp_flow_spec_action_tag);
- }
- if (action.drop)
- rte_flow =
- priv_flow_create_action_queue_drop(priv, &flow, error);
- else
- rte_flow = priv_flow_create_action_queue(priv, &flow, &action,
- error);
- if (!rte_flow)
- goto exit;
- return rte_flow;
-exit:
- rte_free(flow.ibv_attr);
- return NULL;
+ return mlx5_ctrl_flow_vlan(dev, eth_spec, eth_mask, NULL, NULL);
}
/**
- * Create a flow.
+ * Destroy a flow.
*
- * @see rte_flow_create()
+ * @see rte_flow_destroy()
* @see rte_flow_ops
*/
-struct rte_flow *
-mlx5_flow_create(struct rte_eth_dev *dev,
- const struct rte_flow_attr *attr,
- const struct rte_flow_item items[],
- const struct rte_flow_action actions[],
- struct rte_flow_error *error)
+int
+mlx5_flow_destroy(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ struct rte_flow_error *error __rte_unused)
{
struct priv *priv = dev->data->dev_private;
- struct rte_flow *flow;
- priv_lock(priv);
- flow = priv_flow_create(priv, attr, items, actions, error);
- if (flow) {
- LIST_INSERT_HEAD(&priv->flows, flow, next);
- DEBUG("Flow created %p", (void *)flow);
- }
- priv_unlock(priv);
- return flow;
+ mlx5_flow_list_destroy(dev, &priv->flows, flow);
+ return 0;
}
/**
- * Destroy a flow.
+ * Destroy all flows.
*
- * @param priv
- * Pointer to private structure.
- * @param[in] flow
- * Flow to destroy.
+ * @see rte_flow_flush()
+ * @see rte_flow_ops
*/
-static void
-priv_flow_destroy(struct priv *priv,
- struct rte_flow *flow)
+int
+mlx5_flow_flush(struct rte_eth_dev *dev,
+ struct rte_flow_error *error __rte_unused)
{
- (void)priv;
- LIST_REMOVE(flow, next);
- if (flow->ibv_flow)
- claim_zero(ibv_exp_destroy_flow(flow->ibv_flow));
- if (flow->drop)
- goto free;
- if (flow->qp)
- claim_zero(ibv_destroy_qp(flow->qp));
- if (flow->ind_table)
- claim_zero(ibv_exp_destroy_rwq_ind_table(flow->ind_table));
- if (flow->drop && flow->wq)
- claim_zero(ibv_exp_destroy_wq(flow->wq));
- if (flow->drop && flow->cq)
- claim_zero(ibv_destroy_cq(flow->cq));
- if (flow->mark) {
- struct rte_flow *tmp;
- struct rxq *rxq;
- uint32_t mark_n = 0;
- uint32_t queue_n;
+ struct priv *priv = dev->data->dev_private;
- /*
- * To remove the mark from the queue, the queue must not be
- * present in any other marked flow (RSS or not).
- */
- for (queue_n = 0; queue_n < flow->rxqs_n; ++queue_n) {
- rxq = flow->rxqs[queue_n];
- for (tmp = LIST_FIRST(&priv->flows);
- tmp;
- tmp = LIST_NEXT(tmp, next)) {
- uint32_t tqueue_n;
-
- if (tmp->drop)
- continue;
- for (tqueue_n = 0;
- tqueue_n < tmp->rxqs_n;
- ++tqueue_n) {
- struct rxq *trxq;
-
- trxq = tmp->rxqs[tqueue_n];
- if (rxq == trxq)
- ++mark_n;
- }
- }
- rxq->mark = !!mark_n;
- }
- }
-free:
- rte_free(flow->ibv_attr);
- DEBUG("Flow destroyed %p", (void *)flow);
- rte_free(flow);
+ mlx5_flow_list_flush(dev, &priv->flows);
+ return 0;
}
/**
- * Destroy a flow.
+ * Isolated mode.
*
- * @see rte_flow_destroy()
+ * @see rte_flow_isolate()
* @see rte_flow_ops
*/
int
-mlx5_flow_destroy(struct rte_eth_dev *dev,
- struct rte_flow *flow,
+mlx5_flow_isolate(struct rte_eth_dev *dev,
+ int enable,
struct rte_flow_error *error)
{
struct priv *priv = dev->data->dev_private;
- (void)error;
- priv_lock(priv);
- priv_flow_destroy(priv, flow);
- priv_unlock(priv);
+ if (dev->data->dev_started) {
+ rte_flow_error_set(error, EBUSY,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "port must be stopped first");
+ return -rte_errno;
+ }
+ priv->isolated = !!enable;
+ if (enable)
+ dev->dev_ops = &mlx5_dev_ops_isolate;
+ else
+ dev->dev_ops = &mlx5_dev_ops;
return 0;
}
/**
- * Destroy all flows.
+ * Query flow counter.
+ *
+ * @param flow
+ * Pointer to the flow.
*
- * @param priv
- * Pointer to private structure.
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static void
-priv_flow_flush(struct priv *priv)
+static int
+mlx5_flow_query_count(struct rte_flow *flow __rte_unused,
+ void *data __rte_unused,
+ struct rte_flow_error *error)
{
- while (!LIST_EMPTY(&priv->flows)) {
- struct rte_flow *flow;
+#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
+ struct rte_flow_query_count *qc = data;
+ uint64_t counters[2] = {0, 0};
+ struct ibv_query_counter_set_attr query_cs_attr = {
+ .cs = flow->counter->cs,
+ .query_flags = IBV_COUNTER_SET_FORCE_UPDATE,
+ };
+ struct ibv_counter_set_data query_out = {
+ .out = counters,
+ .outlen = 2 * sizeof(uint64_t),
+ };
+ int err = mlx5_glue->query_counter_set(&query_cs_attr, &query_out);
- flow = LIST_FIRST(&priv->flows);
- priv_flow_destroy(priv, flow);
+ if (err)
+ return rte_flow_error_set(error, err,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "cannot read counter");
+ qc->hits_set = 1;
+ qc->bytes_set = 1;
+ qc->hits = counters[0] - flow->counter->hits;
+ qc->bytes = counters[1] - flow->counter->bytes;
+ if (qc->reset) {
+ flow->counter->hits = counters[0];
+ flow->counter->bytes = counters[1];
}
+ return 0;
+#endif
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "counters are not available");
}
/**
- * Destroy all flows.
+ * Query a flows.
*
- * @see rte_flow_flush()
+ * @see rte_flow_query()
* @see rte_flow_ops
*/
int
-mlx5_flow_flush(struct rte_eth_dev *dev,
+mlx5_flow_query(struct rte_eth_dev *dev __rte_unused,
+ struct rte_flow *flow,
+ const struct rte_flow_action *actions,
+ void *data,
struct rte_flow_error *error)
{
- struct priv *priv = dev->data->dev_private;
+ int ret = 0;
- (void)error;
- priv_lock(priv);
- priv_flow_flush(priv);
- priv_unlock(priv);
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_VOID:
+ break;
+ case RTE_FLOW_ACTION_TYPE_COUNT:
+ ret = mlx5_flow_query_count(flow, data, error);
+ break;
+ default:
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ actions,
+ "action not supported");
+ }
+ if (ret < 0)
+ return ret;
+ }
return 0;
}
/**
- * Create drop queue.
+ * Convert a flow director filter to a generic flow.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param fdir_filter
+ * Flow director filter to add.
+ * @param attributes
+ * Generic flow parameters structure.
*
* @return
- * 0 on success.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-priv_flow_create_drop_queue(struct priv *priv)
+mlx5_fdir_filter_convert(struct rte_eth_dev *dev,
+ const struct rte_eth_fdir_filter *fdir_filter,
+ struct mlx5_fdir *attributes)
{
- struct rte_flow_drop *fdq = NULL;
- unsigned int i;
-
- assert(priv->pd);
- assert(priv->ctx);
- fdq = rte_calloc(__func__, 1, sizeof(*fdq), 0);
- if (!fdq) {
- WARN("cannot allocate memory for drop queue");
- goto error;
- }
- fdq->cq = ibv_exp_create_cq(priv->ctx, 1, NULL, NULL, 0,
- &(struct ibv_exp_cq_init_attr){
- .comp_mask = 0,
- });
- if (!fdq->cq) {
- WARN("cannot allocate CQ for drop queue");
- goto error;
- }
- for (i = 0; i != MLX5_DROP_WQ_N; ++i) {
- fdq->wqs[i] = ibv_exp_create_wq(priv->ctx,
- &(struct ibv_exp_wq_init_attr){
- .wq_type = IBV_EXP_WQT_RQ,
- .max_recv_wr = 1,
- .max_recv_sge = 1,
- .pd = priv->pd,
- .cq = fdq->cq,
- });
- if (!fdq->wqs[i]) {
- WARN("cannot allocate WQ for drop queue");
- goto error;
- }
+ struct priv *priv = dev->data->dev_private;
+ const struct rte_eth_fdir_input *input = &fdir_filter->input;
+ const struct rte_eth_fdir_masks *mask =
+ &dev->data->dev_conf.fdir_conf.mask;
+
+ /* Validate queue number. */
+ if (fdir_filter->action.rx_queue >= priv->rxqs_n) {
+ DRV_LOG(ERR, "port %u invalid queue number %d",
+ dev->data->port_id, fdir_filter->action.rx_queue);
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ attributes->attr.ingress = 1;
+ attributes->items[0] = (struct rte_flow_item) {
+ .type = RTE_FLOW_ITEM_TYPE_ETH,
+ .spec = &attributes->l2,
+ .mask = &attributes->l2_mask,
+ };
+ switch (fdir_filter->action.behavior) {
+ case RTE_ETH_FDIR_ACCEPT:
+ attributes->actions[0] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_QUEUE,
+ .conf = &attributes->queue,
+ };
+ break;
+ case RTE_ETH_FDIR_REJECT:
+ attributes->actions[0] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_DROP,
+ };
+ break;
+ default:
+ DRV_LOG(ERR, "port %u invalid behavior %d",
+ dev->data->port_id,
+ fdir_filter->action.behavior);
+ rte_errno = ENOTSUP;
+ return -rte_errno;
+ }
+ attributes->queue.index = fdir_filter->action.rx_queue;
+ /* Handle L3. */
+ switch (fdir_filter->input.flow_type) {
+ case RTE_ETH_FLOW_NONFRAG_IPV4_UDP:
+ case RTE_ETH_FLOW_NONFRAG_IPV4_TCP:
+ case RTE_ETH_FLOW_NONFRAG_IPV4_OTHER:
+ attributes->l3.ipv4.hdr = (struct ipv4_hdr){
+ .src_addr = input->flow.ip4_flow.src_ip,
+ .dst_addr = input->flow.ip4_flow.dst_ip,
+ .time_to_live = input->flow.ip4_flow.ttl,
+ .type_of_service = input->flow.ip4_flow.tos,
+ .next_proto_id = input->flow.ip4_flow.proto,
+ };
+ attributes->l3_mask.ipv4.hdr = (struct ipv4_hdr){
+ .src_addr = mask->ipv4_mask.src_ip,
+ .dst_addr = mask->ipv4_mask.dst_ip,
+ .time_to_live = mask->ipv4_mask.ttl,
+ .type_of_service = mask->ipv4_mask.tos,
+ .next_proto_id = mask->ipv4_mask.proto,
+ };
+ attributes->items[1] = (struct rte_flow_item){
+ .type = RTE_FLOW_ITEM_TYPE_IPV4,
+ .spec = &attributes->l3,
+ .mask = &attributes->l3_mask,
+ };
+ break;
+ case RTE_ETH_FLOW_NONFRAG_IPV6_UDP:
+ case RTE_ETH_FLOW_NONFRAG_IPV6_TCP:
+ case RTE_ETH_FLOW_NONFRAG_IPV6_OTHER:
+ attributes->l3.ipv6.hdr = (struct ipv6_hdr){
+ .hop_limits = input->flow.ipv6_flow.hop_limits,
+ .proto = input->flow.ipv6_flow.proto,
+ };
+
+ memcpy(attributes->l3.ipv6.hdr.src_addr,
+ input->flow.ipv6_flow.src_ip,
+ RTE_DIM(attributes->l3.ipv6.hdr.src_addr));
+ memcpy(attributes->l3.ipv6.hdr.dst_addr,
+ input->flow.ipv6_flow.dst_ip,
+ RTE_DIM(attributes->l3.ipv6.hdr.src_addr));
+ memcpy(attributes->l3_mask.ipv6.hdr.src_addr,
+ mask->ipv6_mask.src_ip,
+ RTE_DIM(attributes->l3_mask.ipv6.hdr.src_addr));
+ memcpy(attributes->l3_mask.ipv6.hdr.dst_addr,
+ mask->ipv6_mask.dst_ip,
+ RTE_DIM(attributes->l3_mask.ipv6.hdr.src_addr));
+ attributes->items[1] = (struct rte_flow_item){
+ .type = RTE_FLOW_ITEM_TYPE_IPV6,
+ .spec = &attributes->l3,
+ .mask = &attributes->l3_mask,
+ };
+ break;
+ default:
+ DRV_LOG(ERR, "port %u invalid flow type%d",
+ dev->data->port_id, fdir_filter->input.flow_type);
+ rte_errno = ENOTSUP;
+ return -rte_errno;
+ }
+ /* Handle L4. */
+ switch (fdir_filter->input.flow_type) {
+ case RTE_ETH_FLOW_NONFRAG_IPV4_UDP:
+ attributes->l4.udp.hdr = (struct udp_hdr){
+ .src_port = input->flow.udp4_flow.src_port,
+ .dst_port = input->flow.udp4_flow.dst_port,
+ };
+ attributes->l4_mask.udp.hdr = (struct udp_hdr){
+ .src_port = mask->src_port_mask,
+ .dst_port = mask->dst_port_mask,
+ };
+ attributes->items[2] = (struct rte_flow_item){
+ .type = RTE_FLOW_ITEM_TYPE_UDP,
+ .spec = &attributes->l4,
+ .mask = &attributes->l4_mask,
+ };
+ break;
+ case RTE_ETH_FLOW_NONFRAG_IPV4_TCP:
+ attributes->l4.tcp.hdr = (struct tcp_hdr){
+ .src_port = input->flow.tcp4_flow.src_port,
+ .dst_port = input->flow.tcp4_flow.dst_port,
+ };
+ attributes->l4_mask.tcp.hdr = (struct tcp_hdr){
+ .src_port = mask->src_port_mask,
+ .dst_port = mask->dst_port_mask,
+ };
+ attributes->items[2] = (struct rte_flow_item){
+ .type = RTE_FLOW_ITEM_TYPE_TCP,
+ .spec = &attributes->l4,
+ .mask = &attributes->l4_mask,
+ };
+ break;
+ case RTE_ETH_FLOW_NONFRAG_IPV6_UDP:
+ attributes->l4.udp.hdr = (struct udp_hdr){
+ .src_port = input->flow.udp6_flow.src_port,
+ .dst_port = input->flow.udp6_flow.dst_port,
+ };
+ attributes->l4_mask.udp.hdr = (struct udp_hdr){
+ .src_port = mask->src_port_mask,
+ .dst_port = mask->dst_port_mask,
+ };
+ attributes->items[2] = (struct rte_flow_item){
+ .type = RTE_FLOW_ITEM_TYPE_UDP,
+ .spec = &attributes->l4,
+ .mask = &attributes->l4_mask,
+ };
+ break;
+ case RTE_ETH_FLOW_NONFRAG_IPV6_TCP:
+ attributes->l4.tcp.hdr = (struct tcp_hdr){
+ .src_port = input->flow.tcp6_flow.src_port,
+ .dst_port = input->flow.tcp6_flow.dst_port,
+ };
+ attributes->l4_mask.tcp.hdr = (struct tcp_hdr){
+ .src_port = mask->src_port_mask,
+ .dst_port = mask->dst_port_mask,
+ };
+ attributes->items[2] = (struct rte_flow_item){
+ .type = RTE_FLOW_ITEM_TYPE_TCP,
+ .spec = &attributes->l4,
+ .mask = &attributes->l4_mask,
+ };
+ break;
+ case RTE_ETH_FLOW_NONFRAG_IPV4_OTHER:
+ case RTE_ETH_FLOW_NONFRAG_IPV6_OTHER:
+ break;
+ default:
+ DRV_LOG(ERR, "port %u invalid flow type%d",
+ dev->data->port_id, fdir_filter->input.flow_type);
+ rte_errno = ENOTSUP;
+ return -rte_errno;
}
- fdq->ind_table = ibv_exp_create_rwq_ind_table(priv->ctx,
- &(struct ibv_exp_rwq_ind_table_init_attr){
- .pd = priv->pd,
- .log_ind_tbl_size = 0,
- .ind_tbl = fdq->wqs,
- .comp_mask = 0,
- });
- if (!fdq->ind_table) {
- WARN("cannot allocate indirection table for drop queue");
- goto error;
- }
- fdq->qp = ibv_exp_create_qp(priv->ctx,
- &(struct ibv_exp_qp_init_attr){
- .qp_type = IBV_QPT_RAW_PACKET,
- .comp_mask =
- IBV_EXP_QP_INIT_ATTR_PD |
- IBV_EXP_QP_INIT_ATTR_PORT |
- IBV_EXP_QP_INIT_ATTR_RX_HASH,
- .pd = priv->pd,
- .rx_hash_conf = &(struct ibv_exp_rx_hash_conf){
- .rx_hash_function =
- IBV_EXP_RX_HASH_FUNC_TOEPLITZ,
- .rx_hash_key_len = rss_hash_default_key_len,
- .rx_hash_key = rss_hash_default_key,
- .rx_hash_fields_mask = 0,
- .rwq_ind_tbl = fdq->ind_table,
- },
- .port_num = priv->port,
- });
- if (!fdq->qp) {
- WARN("cannot allocate QP for drop queue");
- goto error;
- }
- priv->flow_drop_queue = fdq;
return 0;
-error:
- if (fdq->qp)
- claim_zero(ibv_destroy_qp(fdq->qp));
- if (fdq->ind_table)
- claim_zero(ibv_exp_destroy_rwq_ind_table(fdq->ind_table));
- for (i = 0; i != MLX5_DROP_WQ_N; ++i) {
- if (fdq->wqs[i])
- claim_zero(ibv_exp_destroy_wq(fdq->wqs[i]));
- }
- if (fdq->cq)
- claim_zero(ibv_destroy_cq(fdq->cq));
- if (fdq)
- rte_free(fdq);
- priv->flow_drop_queue = NULL;
- return -1;
}
/**
- * Delete drop queue.
+ * Add new flow director filter and store it in list.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param fdir_filter
+ * Flow director filter to add.
*
- * @param priv
- * Pointer to private structure.
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static void
-priv_flow_delete_drop_queue(struct priv *priv)
+static int
+mlx5_fdir_filter_add(struct rte_eth_dev *dev,
+ const struct rte_eth_fdir_filter *fdir_filter)
{
- struct rte_flow_drop *fdq = priv->flow_drop_queue;
- unsigned int i;
+ struct priv *priv = dev->data->dev_private;
+ struct mlx5_fdir attributes = {
+ .attr.group = 0,
+ .l2_mask = {
+ .dst.addr_bytes = "\x00\x00\x00\x00\x00\x00",
+ .src.addr_bytes = "\x00\x00\x00\x00\x00\x00",
+ .type = 0,
+ },
+ };
+ struct rte_flow_error error;
+ struct rte_flow *flow;
+ int ret;
- claim_zero(ibv_destroy_qp(fdq->qp));
- claim_zero(ibv_exp_destroy_rwq_ind_table(fdq->ind_table));
- for (i = 0; i != MLX5_DROP_WQ_N; ++i) {
- assert(fdq->wqs[i]);
- claim_zero(ibv_exp_destroy_wq(fdq->wqs[i]));
+ ret = mlx5_fdir_filter_convert(dev, fdir_filter, &attributes);
+ if (ret)
+ return ret;
+ flow = mlx5_flow_list_create(dev, &priv->flows, &attributes.attr,
+ attributes.items, attributes.actions,
+ &error);
+ if (flow) {
+ DRV_LOG(DEBUG, "port %u FDIR created %p", dev->data->port_id,
+ (void *)flow);
+ return 0;
}
- claim_zero(ibv_destroy_cq(fdq->cq));
- rte_free(fdq);
- priv->flow_drop_queue = NULL;
+ return -rte_errno;
}
/**
- * Remove all flows.
+ * Delete specific filter.
*
- * Called by dev_stop() to remove all flows.
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param fdir_filter
+ * Filter to be deleted.
*
- * @param priv
- * Pointer to private structure.
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-void
-priv_flow_stop(struct priv *priv)
+static int
+mlx5_fdir_filter_delete(struct rte_eth_dev *dev __rte_unused,
+ const struct rte_eth_fdir_filter *fdir_filter
+ __rte_unused)
{
- struct rte_flow *flow;
-
- for (flow = LIST_FIRST(&priv->flows);
- flow;
- flow = LIST_NEXT(flow, next)) {
- claim_zero(ibv_exp_destroy_flow(flow->ibv_flow));
- flow->ibv_flow = NULL;
- if (flow->mark) {
- unsigned int n;
-
- for (n = 0; n < flow->rxqs_n; ++n)
- flow->rxqs[n]->mark = 0;
- }
- DEBUG("Flow %p removed", (void *)flow);
- }
- priv_flow_delete_drop_queue(priv);
+ rte_errno = ENOTSUP;
+ return -rte_errno;
}
/**
- * Add all flows.
+ * Update queue for specific filter.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param fdir_filter
+ * Filter to be updated.
*
* @return
- * 0 on success, a errno value otherwise and rte_errno is set.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-int
-priv_flow_start(struct priv *priv)
+static int
+mlx5_fdir_filter_update(struct rte_eth_dev *dev,
+ const struct rte_eth_fdir_filter *fdir_filter)
{
int ret;
- struct rte_flow *flow;
- ret = priv_flow_create_drop_queue(priv);
+ ret = mlx5_fdir_filter_delete(dev, fdir_filter);
if (ret)
- return -1;
- for (flow = LIST_FIRST(&priv->flows);
- flow;
- flow = LIST_NEXT(flow, next)) {
- struct ibv_qp *qp;
-
- if (flow->drop)
- qp = priv->flow_drop_queue->qp;
- else
- qp = flow->qp;
- flow->ibv_flow = ibv_exp_create_flow(qp, flow->ibv_attr);
- if (!flow->ibv_flow) {
- DEBUG("Flow %p cannot be applied", (void *)flow);
- rte_errno = EINVAL;
- return rte_errno;
- }
- DEBUG("Flow %p applied", (void *)flow);
- if (flow->mark) {
- unsigned int n;
+ return ret;
+ return mlx5_fdir_filter_add(dev, fdir_filter);
+}
- for (n = 0; n < flow->rxqs_n; ++n)
- flow->rxqs[n]->mark = 1;
- }
+/**
+ * Flush all filters.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ */
+static void
+mlx5_fdir_filter_flush(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+
+ mlx5_flow_list_flush(dev, &priv->flows);
+}
+
+/**
+ * Get flow director information.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[out] fdir_info
+ * Resulting flow director information.
+ */
+static void
+mlx5_fdir_info_get(struct rte_eth_dev *dev, struct rte_eth_fdir_info *fdir_info)
+{
+ struct rte_eth_fdir_masks *mask =
+ &dev->data->dev_conf.fdir_conf.mask;
+
+ fdir_info->mode = dev->data->dev_conf.fdir_conf.mode;
+ fdir_info->guarant_spc = 0;
+ rte_memcpy(&fdir_info->mask, mask, sizeof(fdir_info->mask));
+ fdir_info->max_flexpayload = 0;
+ fdir_info->flow_types_mask[0] = 0;
+ fdir_info->flex_payload_unit = 0;
+ fdir_info->max_flex_payload_segment_num = 0;
+ fdir_info->flex_payload_limit = 0;
+ memset(&fdir_info->flex_conf, 0, sizeof(fdir_info->flex_conf));
+}
+
+/**
+ * Deal with flow director operations.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param filter_op
+ * Operation to perform.
+ * @param arg
+ * Pointer to operation-specific structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_fdir_ctrl_func(struct rte_eth_dev *dev, enum rte_filter_op filter_op,
+ void *arg)
+{
+ enum rte_fdir_mode fdir_mode =
+ dev->data->dev_conf.fdir_conf.mode;
+
+ if (filter_op == RTE_ETH_FILTER_NOP)
+ return 0;
+ if (fdir_mode != RTE_FDIR_MODE_PERFECT &&
+ fdir_mode != RTE_FDIR_MODE_PERFECT_MAC_VLAN) {
+ DRV_LOG(ERR, "port %u flow director mode %d not supported",
+ dev->data->port_id, fdir_mode);
+ rte_errno = EINVAL;
+ return -rte_errno;
+ }
+ switch (filter_op) {
+ case RTE_ETH_FILTER_ADD:
+ return mlx5_fdir_filter_add(dev, arg);
+ case RTE_ETH_FILTER_UPDATE:
+ return mlx5_fdir_filter_update(dev, arg);
+ case RTE_ETH_FILTER_DELETE:
+ return mlx5_fdir_filter_delete(dev, arg);
+ case RTE_ETH_FILTER_FLUSH:
+ mlx5_fdir_filter_flush(dev);
+ break;
+ case RTE_ETH_FILTER_INFO:
+ mlx5_fdir_info_get(dev, arg);
+ break;
+ default:
+ DRV_LOG(DEBUG, "port %u unknown operation %u",
+ dev->data->port_id, filter_op);
+ rte_errno = EINVAL;
+ return -rte_errno;
}
return 0;
}
/**
- * Verify if the Rx queue is used in a flow.
+ * Manage filter operations.
*
- * @param priv
- * Pointer to private structure.
- * @param rxq
- * Pointer to the queue to search.
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param filter_type
+ * Filter type.
+ * @param filter_op
+ * Operation to perform.
+ * @param arg
+ * Pointer to operation-specific structure.
*
* @return
- * Nonzero if the queue is used by a flow.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-priv_flow_rxq_in_use(struct priv *priv, struct rxq *rxq)
+mlx5_dev_filter_ctrl(struct rte_eth_dev *dev,
+ enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op,
+ void *arg)
{
- struct rte_flow *flow;
-
- for (flow = LIST_FIRST(&priv->flows);
- flow;
- flow = LIST_NEXT(flow, next)) {
- unsigned int n;
-
- if (flow->drop)
- continue;
- for (n = 0; n < flow->rxqs_n; ++n) {
- if (flow->rxqs[n] == rxq)
- return 1;
+ switch (filter_type) {
+ case RTE_ETH_FILTER_GENERIC:
+ if (filter_op != RTE_ETH_FILTER_GET) {
+ rte_errno = EINVAL;
+ return -rte_errno;
}
+ *(const void **)arg = &mlx5_flow_ops;
+ return 0;
+ case RTE_ETH_FILTER_FDIR:
+ return mlx5_fdir_ctrl_func(dev, filter_op, arg);
+ default:
+ DRV_LOG(ERR, "port %u filter type (%d) not supported",
+ dev->data->port_id, filter_type);
+ rte_errno = ENOTSUP;
+ return -rte_errno;
}
return 0;
}