MLX5_SET(flow_meter_parameters, fmp, cbs_exponent, val);
val = (cbs_cir >> ASO_DSEG_CBS_MAN_OFFSET) & ASO_DSEG_MAN_MASK;
MLX5_SET(flow_meter_parameters, fmp, cbs_mantissa, val);
- val = (cbs_cir >> ASO_DSEG_CIR_EXP_OFFSET) & ASO_DSEG_EXP_MASK;
+ val = (cbs_cir >> ASO_DSEG_XIR_EXP_OFFSET) & ASO_DSEG_EXP_MASK;
MLX5_SET(flow_meter_parameters, fmp, cir_exponent, val);
val = (cbs_cir & ASO_DSEG_MAN_MASK);
MLX5_SET(flow_meter_parameters, fmp, cir_mantissa, val);
NULL, "Metering algorithm not supported.");
}
-/**
- * Calculate mantissa and exponent for cir.
+/*
+ * Calculate mantissa and exponent for cir / eir.
*
- * @param[in] cir
+ * @param[in] xir
* Value to be calculated.
* @param[out] man
* Pointer to the mantissa.
* @param[out] exp
* Pointer to the exp.
*/
-static void
-mlx5_flow_meter_cir_man_exp_calc(int64_t cir, uint8_t *man, uint8_t *exp)
+static inline void
+mlx5_flow_meter_xir_man_exp_calc(int64_t xir, uint8_t *man, uint8_t *exp)
{
int64_t _cir;
int64_t delta = INT64_MAX;
for (m = 0; m <= 0xFF; m++) { /* man width 8 bit */
for (e = 0; e <= 0x1F; e++) { /* exp width 5bit */
_cir = (1000000000ULL * m) >> e;
- if (llabs(cir - _cir) <= delta) {
- delta = llabs(cir - _cir);
+ if (llabs(xir - _cir) <= delta) {
+ delta = llabs(xir - _cir);
_man = m;
_exp = e;
}
*exp = _exp;
}
-/**
+/*
* Calculate mantissa and exponent for xbs.
*
* @param[in] xbs
* @param[out] exp
* Pointer to the exp.
*/
-static void
+static inline void
mlx5_flow_meter_xbs_man_exp_calc(uint64_t xbs, uint8_t *man, uint8_t *exp)
{
int _exp;
struct mlx5_flow_meter_srtcm_rfc2697_prm *srtcm = &fmp->srtcm_prm;
uint8_t man, exp;
uint32_t cbs_exp, cbs_man, cir_exp, cir_man;
- uint32_t ebs_exp, ebs_man;
- uint64_t cir, cbs, ebs;
+ uint32_t eir_exp, eir_man, ebs_exp, ebs_man;
+ uint64_t cir, cbs, eir, ebs;
- if (fmp->profile.alg != RTE_MTR_SRTCM_RFC2697)
- return -rte_mtr_error_set(error, ENOTSUP,
+ if (!priv->sh->meter_aso_en) {
+ /* Legacy FW metering will only support srTCM. */
+ if (fmp->profile.alg != RTE_MTR_SRTCM_RFC2697)
+ return -rte_mtr_error_set(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_PROFILE,
- NULL, "Metering algorithm not supported.");
- if (!priv->sh->meter_aso_en && fmp->profile.packet_mode)
- return -rte_mtr_error_set(error, ENOTSUP,
- RTE_MTR_ERROR_TYPE_METER_PROFILE,
- NULL, "Metering algorithm packet mode not supported.");
- if (priv->sh->meter_aso_en && fmp->profile.packet_mode) {
- cir = fmp->profile.srtcm_rfc2697.cir <<
- MLX5_MTRS_PPS_MAP_BPS_SHIFT;
- cbs = fmp->profile.srtcm_rfc2697.cbs <<
- MLX5_MTRS_PPS_MAP_BPS_SHIFT;
- ebs = fmp->profile.srtcm_rfc2697.ebs <<
- MLX5_MTRS_PPS_MAP_BPS_SHIFT;
- } else {
+ NULL, "Metering algorithm is not supported.");
+ if (fmp->profile.packet_mode)
+ return -rte_mtr_error_set(error, ENOTSUP,
+ RTE_MTR_ERROR_TYPE_METER_PROFILE, NULL,
+ "Metering algorithm packet mode is not supported.");
+ }
+ switch (fmp->profile.alg) {
+ case RTE_MTR_SRTCM_RFC2697:
cir = fmp->profile.srtcm_rfc2697.cir;
cbs = fmp->profile.srtcm_rfc2697.cbs;
+ eir = 0;
ebs = fmp->profile.srtcm_rfc2697.ebs;
+ break;
+ case RTE_MTR_TRTCM_RFC2698:
+ MLX5_ASSERT(fmp->profile.trtcm_rfc2698.pir >
+ fmp->profile.trtcm_rfc2698.cir &&
+ fmp->profile.trtcm_rfc2698.pbs >
+ fmp->profile.trtcm_rfc2698.cbs);
+ cir = fmp->profile.trtcm_rfc2698.cir;
+ cbs = fmp->profile.trtcm_rfc2698.cbs;
+ /* EIR / EBS are filled with PIR / PBS. */
+ eir = fmp->profile.trtcm_rfc2698.pir;
+ ebs = fmp->profile.trtcm_rfc2698.pbs;
+ break;
+ case RTE_MTR_TRTCM_RFC4115:
+ cir = fmp->profile.trtcm_rfc4115.cir;
+ cbs = fmp->profile.trtcm_rfc4115.cbs;
+ eir = fmp->profile.trtcm_rfc4115.eir;
+ ebs = fmp->profile.trtcm_rfc4115.ebs;
+ break;
+ default:
+ return -rte_mtr_error_set(error, EINVAL,
+ RTE_MTR_ERROR_TYPE_METER_PROFILE, NULL,
+ "Metering algorithm mode is invalid");
+ }
+ /* Adjust the values for PPS mode. */
+ if (fmp->profile.packet_mode) {
+ cir <<= MLX5_MTRS_PPS_MAP_BPS_SHIFT;
+ cbs <<= MLX5_MTRS_PPS_MAP_BPS_SHIFT;
+ eir <<= MLX5_MTRS_PPS_MAP_BPS_SHIFT;
+ ebs <<= MLX5_MTRS_PPS_MAP_BPS_SHIFT;
}
/* cir = 8G * cir_mantissa * 1/(2^cir_exponent)) Bytes/Sec */
- mlx5_flow_meter_cir_man_exp_calc(cir, &man, &exp);
+ mlx5_flow_meter_xir_man_exp_calc(cir, &man, &exp);
/* Check if cir mantissa is too large. */
- if (exp > ASO_DSEG_CIR_EXP_MASK)
+ if (exp > ASO_DSEG_XIR_EXP_MASK)
return -rte_mtr_error_set(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
- "meter profile parameter cir is"
- " not supported.");
+ "meter profile parameter cir is not supported.");
cir_man = man;
cir_exp = exp;
/* cbs = cbs_mantissa * 2^cbs_exponent */
if (exp > ASO_DSEG_EXP_MASK)
return -rte_mtr_error_set(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
- "meter profile parameter cbs is"
- " not supported.");
+ "meter profile parameter cbs is not supported.");
cbs_man = man;
cbs_exp = exp;
srtcm->cbs_cir = rte_cpu_to_be_32(cbs_exp << ASO_DSEG_CBS_EXP_OFFSET |
cbs_man << ASO_DSEG_CBS_MAN_OFFSET |
- cir_exp << ASO_DSEG_CIR_EXP_OFFSET |
+ cir_exp << ASO_DSEG_XIR_EXP_OFFSET |
cir_man);
+ mlx5_flow_meter_xir_man_exp_calc(eir, &man, &exp);
+ /* Check if eir mantissa is too large. */
+ if (exp > ASO_DSEG_XIR_EXP_MASK)
+ return -rte_mtr_error_set(error, ENOTSUP,
+ RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
+ "meter profile parameter eir is not supported.");
+ eir_man = man;
+ eir_exp = exp;
mlx5_flow_meter_xbs_man_exp_calc(ebs, &man, &exp);
/* Check if ebs mantissa is too large. */
if (exp > ASO_DSEG_EXP_MASK)
return -rte_mtr_error_set(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
- "meter profile parameter ebs is"
- " not supported.");
+ "meter profile parameter ebs is not supported.");
ebs_man = man;
ebs_exp = exp;
srtcm->ebs_eir = rte_cpu_to_be_32(ebs_exp << ASO_DSEG_EBS_EXP_OFFSET |
- ebs_man << ASO_DSEG_EBS_MAN_OFFSET);
+ ebs_man << ASO_DSEG_EBS_MAN_OFFSET |
+ eir_exp << ASO_DSEG_XIR_EXP_OFFSET |
+ eir_man);
if (srtcm->cbs_cir)
fmp->g_support = 1;
if (srtcm->ebs_eir)
cbs_mantissa, val);
}
if (modify_bits & MLX5_FLOW_METER_OBJ_MODIFY_FIELD_CIR) {
- val = (cbs_cir >> ASO_DSEG_CIR_EXP_OFFSET) &
+ val = (cbs_cir >> ASO_DSEG_XIR_EXP_OFFSET) &
ASO_DSEG_EXP_MASK;
MLX5_SET(flow_meter_parameters, attr,
cir_exponent, val);
&srtcm, modify_bits, 0, 0);
else
ret = mlx5_flow_meter_action_modify(priv, fm,
- &fm->profile->srtcm_prm,
+ &fm->profile->srtcm_prm,
modify_bits, 0, 1);
if (ret)
return -rte_mtr_error_set(error, -ret,
git.droids-corp.org / dpdk.git / blobdiff