*/
#include <math.h>
+#include <rte_malloc.h>
#include <rte_mtr.h>
#include <rte_mtr_driver.h>
#include "mlx5.h"
#include "mlx5_flow.h"
+/**
+ * Find meter profile by id.
+ *
+ * @param priv
+ * Pointer to mlx5_priv.
+ * @param meter_profile_id
+ * Meter profile id.
+ *
+ * @return
+ * Pointer to the profile found on success, NULL otherwise.
+ */
+static struct mlx5_flow_meter_profile *
+mlx5_flow_meter_profile_find(struct mlx5_priv *priv, uint32_t meter_profile_id)
+{
+ struct mlx5_mtr_profiles *fmps = &priv->flow_meter_profiles;
+ struct mlx5_flow_meter_profile *fmp;
+
+ TAILQ_FOREACH(fmp, fmps, next)
+ if (meter_profile_id == fmp->meter_profile_id)
+ return fmp;
+ return NULL;
+}
+
+/**
+ * Calculate mantissa and exponent for cir.
+ *
+ * @param[in] cir
+ * Value to be calculated.
+ * @param[out] man
+ * Pointer to the mantissa.
+ * @param[out] exp
+ * Pointer to the exp.
+ */
+static void
+mlx5_flow_meter_cir_man_exp_calc(int64_t cir, uint8_t *man, uint8_t *exp)
+{
+ int64_t _cir;
+ int64_t delta = INT64_MAX;
+ uint8_t _man = 0;
+ uint8_t _exp = 0;
+ uint64_t m, e;
+
+ for (m = 0; m <= 0xFF; m++) { /* man width 8 bit */
+ for (e = 0; e <= 0x1F; e++) { /* exp width 5bit */
+ _cir = (1000000000ULL * m) >> e;
+ if (llabs(cir - _cir) <= delta) {
+ delta = llabs(cir - _cir);
+ _man = m;
+ _exp = e;
+ }
+ }
+ }
+ *man = _man;
+ *exp = _exp;
+}
+
+/**
+ * Calculate mantissa and exponent for xbs.
+ *
+ * @param[in] xbs
+ * Value to be calculated.
+ * @param[out] man
+ * Pointer to the mantissa.
+ * @param[out] exp
+ * Pointer to the exp.
+ */
+static void
+mlx5_flow_meter_xbs_man_exp_calc(uint64_t xbs, uint8_t *man, uint8_t *exp)
+{
+ int _exp;
+ double _man;
+
+ /* Special case xbs == 0 ? both exp and matissa are 0. */
+ if (xbs == 0) {
+ *man = 0;
+ *exp = 0;
+ return;
+ }
+ /* xbs = xbs_mantissa * 2^xbs_exponent */
+ _man = frexp(xbs, &_exp);
+ _man = _man * pow(2, MLX5_MAN_WIDTH);
+ _exp = _exp - MLX5_MAN_WIDTH;
+ *man = (uint8_t)ceil(_man);
+ *exp = _exp;
+}
+
+/**
+ * Fill the prm meter parameter.
+ *
+ * @param[in,out] fmp
+ * Pointer to meter profie to be converted.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_meter_param_fill(struct mlx5_flow_meter_profile *fmp,
+ struct rte_mtr_error *error)
+{
+ struct mlx5_flow_meter_srtcm_rfc2697_prm *srtcm = &fmp->srtcm_prm;
+ uint8_t man, exp;
+
+ if (fmp->profile.alg != RTE_MTR_SRTCM_RFC2697)
+ return -rte_mtr_error_set(error, ENOTSUP,
+ RTE_MTR_ERROR_TYPE_METER_PROFILE,
+ NULL, "Metering algorithm not supported.");
+ /* cbs = cbs_mantissa * 2^cbs_exponent */
+ mlx5_flow_meter_xbs_man_exp_calc(fmp->profile.srtcm_rfc2697.cbs,
+ &man, &exp);
+ srtcm->cbs_mantissa = man;
+ srtcm->cbs_exponent = exp;
+ /* Check if cbs mantissa is too large. */
+ if (srtcm->cbs_exponent != exp)
+ return -rte_mtr_error_set(error, EINVAL,
+ RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
+ "Metering profile parameter cbs is"
+ " invalid.");
+ /* ebs = ebs_mantissa * 2^ebs_exponent */
+ mlx5_flow_meter_xbs_man_exp_calc(fmp->profile.srtcm_rfc2697.ebs,
+ &man, &exp);
+ srtcm->ebs_mantissa = man;
+ srtcm->ebs_exponent = exp;
+ /* Check if ebs mantissa is too large. */
+ if (srtcm->ebs_exponent != exp)
+ return -rte_mtr_error_set(error, EINVAL,
+ RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
+ "Metering profile parameter ebs is"
+ " invalid.");
+ /* cir = 8G * cir_mantissa * 1/(2^cir_exponent)) Bytes/Sec */
+ mlx5_flow_meter_cir_man_exp_calc(fmp->profile.srtcm_rfc2697.cir,
+ &man, &exp);
+ srtcm->cir_mantissa = man;
+ srtcm->cir_exponent = exp;
+ /* Check if cir mantissa is too large. */
+ if (srtcm->cir_exponent != exp)
+ return -rte_mtr_error_set(error, EINVAL,
+ RTE_MTR_ERROR_TYPE_MTR_PARAMS, NULL,
+ "Metering profile parameter cir is"
+ " invalid.");
+ return 0;
+}
+
/**
* Callback to get MTR capabilities.
*
return 0;
}
+/**
+ * Callback to add MTR profile.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ * @param[in] meter_profile_id
+ * Meter profile id.
+ * @param[in] profile
+ * Pointer to meter profile detail.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_meter_profile_add(struct rte_eth_dev *dev,
+ uint32_t meter_profile_id,
+ struct rte_mtr_meter_profile *profile,
+ struct rte_mtr_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_mtr_profiles *fmps = &priv->flow_meter_profiles;
+ struct mlx5_flow_meter_profile *fmp;
+ int ret;
+
+ if (!priv->mtr_en)
+ return -rte_mtr_error_set(error, ENOTSUP,
+ RTE_MTR_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Meter is not support");
+ /* Meter profile memory allocation. */
+ fmp = rte_calloc(__func__, 1, sizeof(struct mlx5_flow_meter_profile),
+ RTE_CACHE_LINE_SIZE);
+ if (fmp == NULL)
+ return -rte_mtr_error_set(error, ENOMEM,
+ RTE_MTR_ERROR_TYPE_UNSPECIFIED,
+ NULL, "Meter profile memory "
+ "alloc failed.");
+ /* Fill profile info. */
+ fmp->meter_profile_id = meter_profile_id;
+ fmp->profile = *profile;
+ /* Fill the flow meter parameters for the PRM. */
+ ret = mlx5_flow_meter_param_fill(fmp, error);
+ if (ret)
+ goto error;
+ /* Add to list. */
+ TAILQ_INSERT_TAIL(fmps, fmp, next);
+ return 0;
+error:
+ rte_free(fmp);
+ return ret;
+}
+
+/**
+ * Callback to delete MTR profile.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ * @param[in] meter_profile_id
+ * Meter profile id.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_meter_profile_delete(struct rte_eth_dev *dev,
+ uint32_t meter_profile_id,
+ struct rte_mtr_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_flow_meter_profile *fmp;
+
+ if (!priv->mtr_en)
+ return -rte_mtr_error_set(error, ENOTSUP,
+ RTE_MTR_ERROR_TYPE_UNSPECIFIED, NULL,
+ "Meter is not support");
+ /* Meter profile must exist. */
+ fmp = mlx5_flow_meter_profile_find(priv, meter_profile_id);
+ if (fmp == NULL)
+ return -rte_mtr_error_set(error, ENOENT,
+ RTE_MTR_ERROR_TYPE_METER_PROFILE_ID,
+ &meter_profile_id,
+ "Meter profile id invalid.");
+ /* Check profile is unused. */
+ if (fmp->ref_cnt)
+ return -rte_mtr_error_set(error, EBUSY,
+ RTE_MTR_ERROR_TYPE_METER_PROFILE_ID,
+ NULL, "Meter profile in use.");
+ /* Remove from list. */
+ TAILQ_REMOVE(&priv->flow_meter_profiles, fmp, next);
+ rte_free(fmp);
+ return 0;
+}
+
static const struct rte_mtr_ops mlx5_flow_mtr_ops = {
.capabilities_get = mlx5_flow_mtr_cap_get,
- .meter_profile_add = NULL,
- .meter_profile_delete = NULL,
+ .meter_profile_add = mlx5_flow_meter_profile_add,
+ .meter_profile_delete = mlx5_flow_meter_profile_delete,
.create = NULL,
.destroy = NULL,
.meter_enable = NULL,
git.droids-corp.org / dpdk.git / blobdiff