#include <rte_branch_prediction.h>
#include <rte_ether.h>
#include <rte_cycles.h>
+#include <rte_flow.h>
#include "mlx5.h"
#include "mlx5_utils.h"
#define MLX5_TXOFF_CONFIG_VLAN (1u << 5) /* VLAN insertion supported.*/
#define MLX5_TXOFF_CONFIG_METADATA (1u << 6) /* Flow metadata. */
#define MLX5_TXOFF_CONFIG_EMPW (1u << 8) /* Enhanced MPW supported.*/
+#define MLX5_TXOFF_CONFIG_MPW (1u << 9) /* Legacy MPW supported.*/
/* The most common offloads groups. */
#define MLX5_TXOFF_CONFIG_NONE 0
volatile struct mlx5_cqe *cqe, uint32_t rss_hash_res);
static __rte_always_inline void
-mprq_buf_replace(struct mlx5_rxq_data *rxq, uint16_t rq_idx);
+mprq_buf_replace(struct mlx5_rxq_data *rxq, uint16_t rq_idx,
+ const unsigned int strd_n);
static int
mlx5_queue_state_modify(struct rte_eth_dev *dev,
struct mlx5_mp_arg_queue_state_modify *sm);
+static inline void
+mlx5_lro_update_tcp_hdr(struct rte_tcp_hdr *restrict tcp,
+ volatile struct mlx5_cqe *restrict cqe,
+ uint32_t phcsum);
+
+static inline void
+mlx5_lro_update_hdr(uint8_t *restrict padd,
+ volatile struct mlx5_cqe *restrict cqe,
+ uint32_t len);
+
uint32_t mlx5_ptype_table[] __rte_cache_aligned = {
[0xff] = RTE_PTYPE_ALL_MASK, /* Last entry for errored packet. */
};
MKSTR(path, "%s/%s", MLX5_SYSTEM_LOG_DIR, fname);
fd = fopen(path, "a+");
if (!fd) {
- DRV_LOG(WARNING, "cannot open %s for debug dump\n",
- path);
+ DRV_LOG(WARNING, "cannot open %s for debug dump", path);
MKSTR(path2, "./%s", fname);
fd = fopen(path2, "a+");
if (!fd) {
- DRV_LOG(ERR, "cannot open %s for debug dump\n",
- path2);
+ DRV_LOG(ERR, "cannot open %s for debug dump", path2);
return;
}
- DRV_LOG(INFO, "New debug dump in file %s\n", path2);
+ DRV_LOG(INFO, "New debug dump in file %s", path2);
} else {
- DRV_LOG(INFO, "New debug dump in file %s\n", path);
+ DRV_LOG(INFO, "New debug dump in file %s", path);
}
if (hex_title)
rte_hexdump(fd, hex_title, buf, hex_len);
* Pointer to the error CQE.
*
* @return
- * The last Tx buffer element to free.
+ * Negative value if queue recovery failed, otherwise
+ * the error completion entry is handled successfully.
*/
-uint16_t
+static int
mlx5_tx_error_cqe_handle(struct mlx5_txq_data *restrict txq,
volatile struct mlx5_err_cqe *err_cqe)
{
*/
txq->stats.oerrors += ((txq->wqe_ci & wqe_m) -
new_wqe_pi) & wqe_m;
- if (tx_recover_qp(txq_ctrl) == 0) {
- txq->cq_ci++;
- /* Release all the remaining buffers. */
- return txq->elts_head;
+ if (tx_recover_qp(txq_ctrl)) {
+ /* Recovering failed - retry later on the same WQE. */
+ return -1;
}
- /* Recovering failed - try again later on the same WQE. */
- } else {
- txq->cq_ci++;
+ /* Release all the remaining buffers. */
+ txq_free_elts(txq_ctrl);
}
- /* Do not release buffers. */
- return txq->elts_tail;
+ return 0;
}
/**
scat = &((volatile struct mlx5_wqe_mprq *)
rxq->wqes)[i].dseg;
- addr = (uintptr_t)mlx5_mprq_buf_addr(buf);
+ addr = (uintptr_t)mlx5_mprq_buf_addr(buf,
+ 1 << rxq->strd_num_n);
byte_count = (1 << rxq->strd_sz_n) *
(1 << rxq->strd_num_n);
} else {
}
/**
- * Modify a Verbs queue state.
+ * Modify a Verbs/DevX queue state.
* This must be called from the primary process.
*
* @param dev
struct mlx5_priv *priv = dev->data->dev_private;
if (sm->is_wq) {
- struct ibv_wq_attr mod = {
- .attr_mask = IBV_WQ_ATTR_STATE,
- .wq_state = sm->state,
- };
struct mlx5_rxq_data *rxq = (*priv->rxqs)[sm->queue_id];
struct mlx5_rxq_ctrl *rxq_ctrl =
container_of(rxq, struct mlx5_rxq_ctrl, rxq);
- ret = mlx5_glue->modify_wq(rxq_ctrl->obj->wq, &mod);
+ if (rxq_ctrl->obj->type == MLX5_RXQ_OBJ_TYPE_IBV) {
+ struct ibv_wq_attr mod = {
+ .attr_mask = IBV_WQ_ATTR_STATE,
+ .wq_state = sm->state,
+ };
+
+ ret = mlx5_glue->modify_wq(rxq_ctrl->obj->wq, &mod);
+ } else { /* rxq_ctrl->obj->type == MLX5_RXQ_OBJ_TYPE_DEVX_RQ. */
+ struct mlx5_devx_modify_rq_attr rq_attr;
+
+ memset(&rq_attr, 0, sizeof(rq_attr));
+ if (sm->state == IBV_WQS_RESET) {
+ rq_attr.rq_state = MLX5_RQC_STATE_ERR;
+ rq_attr.state = MLX5_RQC_STATE_RST;
+ } else if (sm->state == IBV_WQS_RDY) {
+ rq_attr.rq_state = MLX5_RQC_STATE_RST;
+ rq_attr.state = MLX5_RQC_STATE_RDY;
+ } else if (sm->state == IBV_WQS_ERR) {
+ rq_attr.rq_state = MLX5_RQC_STATE_RDY;
+ rq_attr.state = MLX5_RQC_STATE_ERR;
+ }
+ ret = mlx5_devx_cmd_modify_rq(rxq_ctrl->obj->rq,
+ &rq_attr);
+ }
if (ret) {
- DRV_LOG(ERR, "Cannot change Rx WQ state to %u - %s\n",
+ DRV_LOG(ERR, "Cannot change Rx WQ state to %u - %s",
sm->state, strerror(errno));
rte_errno = errno;
return ret;
.qp_state = IBV_QPS_RESET,
.port_num = (uint8_t)priv->ibv_port,
};
- struct ibv_qp *qp = txq_ctrl->ibv->qp;
+ struct ibv_qp *qp = txq_ctrl->obj->qp;
ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
if (ret) {
DRV_LOG(ERR, "Cannot change the Tx QP state to RESET "
- "%s\n", strerror(errno));
+ "%s", strerror(errno));
rte_errno = errno;
return ret;
}
ret = mlx5_glue->modify_qp(qp, &mod,
(IBV_QP_STATE | IBV_QP_PORT));
if (ret) {
- DRV_LOG(ERR, "Cannot change Tx QP state to INIT %s\n",
+ DRV_LOG(ERR, "Cannot change Tx QP state to INIT %s",
strerror(errno));
rte_errno = errno;
return ret;
mod.qp_state = IBV_QPS_RTR;
ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
if (ret) {
- DRV_LOG(ERR, "Cannot change Tx QP state to RTR %s\n",
+ DRV_LOG(ERR, "Cannot change Tx QP state to RTR %s",
strerror(errno));
rte_errno = errno;
return ret;
mod.qp_state = IBV_QPS_RTS;
ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
if (ret) {
- DRV_LOG(ERR, "Cannot change Tx QP state to RTS %s\n",
+ DRV_LOG(ERR, "Cannot change Tx QP state to RTS %s",
strerror(errno));
rte_errno = errno;
return ret;
*
* @param[in] rxq
* Pointer to RX queue structure.
- * @param[in] mbuf_prepare
- * Whether to prepare mbufs for the RQ.
+ * @param[in] vec
+ * 1 when called from vectorized Rx burst, need to prepare mbufs for the RQ.
+ * 0 when called from non-vectorized Rx burst.
*
* @return
* -1 in case of recovery error, otherwise the CQE status.
*/
int
-mlx5_rx_err_handle(struct mlx5_rxq_data *rxq, uint8_t mbuf_prepare)
+mlx5_rx_err_handle(struct mlx5_rxq_data *rxq, uint8_t vec)
{
const uint16_t cqe_n = 1 << rxq->cqe_n;
const uint16_t cqe_mask = cqe_n - 1;
if (mlx5_queue_state_modify(ETH_DEV(rxq_ctrl->priv),
&sm))
return -1;
- if (mbuf_prepare) {
+ if (vec) {
const uint16_t q_mask = wqe_n - 1;
uint16_t elt_idx;
struct rte_mbuf **elt;
return -1;
}
}
+ for (i = 0; i < (int)wqe_n; ++i) {
+ elt = &(*rxq->elts)[i];
+ DATA_LEN(*elt) =
+ (uint16_t)((*elt)->buf_len -
+ rte_pktmbuf_headroom(*elt));
+ }
+ /* Padding with a fake mbuf for vec Rx. */
+ for (i = 0; i < MLX5_VPMD_DESCS_PER_LOOP; ++i)
+ (*rxq->elts)[wqe_n + i] =
+ &rxq->fake_mbuf;
}
mlx5_rxq_initialize(rxq);
rxq->err_state = MLX5_RXQ_ERR_STATE_NO_ERROR;
pkt->hash.fdir.hi = mlx5_flow_mark_get(mark);
}
}
+ if (rte_flow_dynf_metadata_avail() && cqe->flow_table_metadata) {
+ pkt->ol_flags |= PKT_RX_DYNF_METADATA;
+ *RTE_FLOW_DYNF_METADATA(pkt) = cqe->flow_table_metadata;
+ }
if (rxq->csum)
pkt->ol_flags |= rxq_cq_to_ol_flags(cqe);
if (rxq->vlan_strip &&
}
pkt = seg;
assert(len >= (rxq->crc_present << 2));
- pkt->ol_flags = 0;
+ pkt->ol_flags &= EXT_ATTACHED_MBUF;
/* If compressed, take hash result from mini-CQE. */
rss_hash_res = rte_be_to_cpu_32(mcqe == NULL ?
cqe->rx_hash_res :
if (rxq->crc_present)
len -= RTE_ETHER_CRC_LEN;
PKT_LEN(pkt) = len;
+ if (cqe->lro_num_seg > 1) {
+ mlx5_lro_update_hdr
+ (rte_pktmbuf_mtod(pkt, uint8_t *), cqe,
+ len);
+ pkt->ol_flags |= PKT_RX_LRO;
+ pkt->tso_segsz = len / cqe->lro_num_seg;
+ }
}
DATA_LEN(rep) = DATA_LEN(seg);
PKT_LEN(rep) = PKT_LEN(seg);
return i;
}
+/**
+ * Update LRO packet TCP header.
+ * The HW LRO feature doesn't update the TCP header after coalescing the
+ * TCP segments but supplies information in CQE to fill it by SW.
+ *
+ * @param tcp
+ * Pointer to the TCP header.
+ * @param cqe
+ * Pointer to the completion entry..
+ * @param phcsum
+ * The L3 pseudo-header checksum.
+ */
+static inline void
+mlx5_lro_update_tcp_hdr(struct rte_tcp_hdr *restrict tcp,
+ volatile struct mlx5_cqe *restrict cqe,
+ uint32_t phcsum)
+{
+ uint8_t l4_type = (rte_be_to_cpu_16(cqe->hdr_type_etc) &
+ MLX5_CQE_L4_TYPE_MASK) >> MLX5_CQE_L4_TYPE_SHIFT;
+ /*
+ * The HW calculates only the TCP payload checksum, need to complete
+ * the TCP header checksum and the L3 pseudo-header checksum.
+ */
+ uint32_t csum = phcsum + cqe->csum;
+
+ if (l4_type == MLX5_L4_HDR_TYPE_TCP_EMPTY_ACK ||
+ l4_type == MLX5_L4_HDR_TYPE_TCP_WITH_ACL) {
+ tcp->tcp_flags |= RTE_TCP_ACK_FLAG;
+ tcp->recv_ack = cqe->lro_ack_seq_num;
+ tcp->rx_win = cqe->lro_tcp_win;
+ }
+ if (cqe->lro_tcppsh_abort_dupack & MLX5_CQE_LRO_PUSH_MASK)
+ tcp->tcp_flags |= RTE_TCP_PSH_FLAG;
+ tcp->cksum = 0;
+ csum += rte_raw_cksum(tcp, (tcp->data_off & 0xF) * 4);
+ csum = ((csum & 0xffff0000) >> 16) + (csum & 0xffff);
+ csum = (~csum) & 0xffff;
+ if (csum == 0)
+ csum = 0xffff;
+ tcp->cksum = csum;
+}
+
+/**
+ * Update LRO packet headers.
+ * The HW LRO feature doesn't update the L3/TCP headers after coalescing the
+ * TCP segments but supply information in CQE to fill it by SW.
+ *
+ * @param padd
+ * The packet address.
+ * @param cqe
+ * Pointer to the completion entry..
+ * @param len
+ * The packet length.
+ */
+static inline void
+mlx5_lro_update_hdr(uint8_t *restrict padd,
+ volatile struct mlx5_cqe *restrict cqe,
+ uint32_t len)
+{
+ union {
+ struct rte_ether_hdr *eth;
+ struct rte_vlan_hdr *vlan;
+ struct rte_ipv4_hdr *ipv4;
+ struct rte_ipv6_hdr *ipv6;
+ struct rte_tcp_hdr *tcp;
+ uint8_t *hdr;
+ } h = {
+ .hdr = padd,
+ };
+ uint16_t proto = h.eth->ether_type;
+ uint32_t phcsum;
+
+ h.eth++;
+ while (proto == RTE_BE16(RTE_ETHER_TYPE_VLAN) ||
+ proto == RTE_BE16(RTE_ETHER_TYPE_QINQ)) {
+ proto = h.vlan->eth_proto;
+ h.vlan++;
+ }
+ if (proto == RTE_BE16(RTE_ETHER_TYPE_IPV4)) {
+ h.ipv4->time_to_live = cqe->lro_min_ttl;
+ h.ipv4->total_length = rte_cpu_to_be_16(len - (h.hdr - padd));
+ h.ipv4->hdr_checksum = 0;
+ h.ipv4->hdr_checksum = rte_ipv4_cksum(h.ipv4);
+ phcsum = rte_ipv4_phdr_cksum(h.ipv4, 0);
+ h.ipv4++;
+ } else {
+ h.ipv6->hop_limits = cqe->lro_min_ttl;
+ h.ipv6->payload_len = rte_cpu_to_be_16(len - (h.hdr - padd) -
+ sizeof(*h.ipv6));
+ phcsum = rte_ipv6_phdr_cksum(h.ipv6, 0);
+ h.ipv6++;
+ }
+ mlx5_lro_update_tcp_hdr(h.tcp, cqe, phcsum);
+}
+
void
mlx5_mprq_buf_free_cb(void *addr __rte_unused, void *opaque)
{
}
static inline void
-mprq_buf_replace(struct mlx5_rxq_data *rxq, uint16_t rq_idx)
+mprq_buf_replace(struct mlx5_rxq_data *rxq, uint16_t rq_idx,
+ const unsigned int strd_n)
{
struct mlx5_mprq_buf *rep = rxq->mprq_repl;
volatile struct mlx5_wqe_data_seg *wqe =
/* Replace MPRQ buf. */
(*rxq->mprq_bufs)[rq_idx] = rep;
/* Replace WQE. */
- addr = mlx5_mprq_buf_addr(rep);
+ addr = mlx5_mprq_buf_addr(rep, strd_n);
wqe->addr = rte_cpu_to_be_64((uintptr_t)addr);
/* If there's only one MR, no need to replace LKey in WQE. */
if (unlikely(mlx5_mr_btree_len(&rxq->mr_ctrl.cache_bh) > 1))
unsigned int i = 0;
uint32_t rq_ci = rxq->rq_ci;
uint16_t consumed_strd = rxq->consumed_strd;
+ uint16_t headroom_sz = rxq->strd_headroom_en * RTE_PKTMBUF_HEADROOM;
struct mlx5_mprq_buf *buf = (*rxq->mprq_bufs)[rq_ci & wq_mask];
while (i < pkts_n) {
uint32_t byte_cnt;
volatile struct mlx5_mini_cqe8 *mcqe = NULL;
uint32_t rss_hash_res = 0;
+ uint8_t lro_num_seg;
if (consumed_strd == strd_n) {
/* Replace WQE only if the buffer is still in use. */
if (rte_atomic16_read(&buf->refcnt) > 1) {
- mprq_buf_replace(rxq, rq_ci & wq_mask);
+ mprq_buf_replace(rxq, rq_ci & wq_mask, strd_n);
/* Release the old buffer. */
mlx5_mprq_buf_free(buf);
} else if (unlikely(rxq->mprq_repl == NULL)) {
}
assert(strd_idx < strd_n);
assert(!((rte_be_to_cpu_16(cqe->wqe_id) ^ rq_ci) & wq_mask));
+ lro_num_seg = cqe->lro_num_seg;
/*
* Currently configured to receive a packet per a stride. But if
* MTU is adjusted through kernel interface, device could
* case, the packet should be dropped because it is bigger than
* the max_rx_pkt_len.
*/
- if (unlikely(strd_cnt > 1)) {
+ if (unlikely(!lro_num_seg && strd_cnt > 1)) {
++rxq->stats.idropped;
continue;
}
if (rxq->crc_present)
len -= RTE_ETHER_CRC_LEN;
offset = strd_idx * strd_sz + strd_shift;
- addr = RTE_PTR_ADD(mlx5_mprq_buf_addr(buf), offset);
- /* Initialize the offload flag. */
- pkt->ol_flags = 0;
+ addr = RTE_PTR_ADD(mlx5_mprq_buf_addr(buf, strd_n), offset);
/*
* Memcpy packets to the target mbuf if:
* - The size of packet is smaller than mprq_max_memcpy_len.
continue;
}
rte_memcpy(rte_pktmbuf_mtod(pkt, void *), addr, len);
+ DATA_LEN(pkt) = len;
} else {
rte_iova_t buf_iova;
struct rte_mbuf_ext_shared_info *shinfo;
uint16_t buf_len = strd_cnt * strd_sz;
+ void *buf_addr;
/* Increment the refcnt of the whole chunk. */
rte_atomic16_add_return(&buf->refcnt, 1);
assert((uint16_t)rte_atomic16_read(&buf->refcnt) <=
strd_n + 1);
- addr = RTE_PTR_SUB(addr, RTE_PKTMBUF_HEADROOM);
+ buf_addr = RTE_PTR_SUB(addr, headroom_sz);
/*
* MLX5 device doesn't use iova but it is necessary in a
* case where the Rx packet is transmitted via a
* different PMD.
*/
buf_iova = rte_mempool_virt2iova(buf) +
- RTE_PTR_DIFF(addr, buf);
- shinfo = rte_pktmbuf_ext_shinfo_init_helper(addr,
- &buf_len, mlx5_mprq_buf_free_cb, buf);
+ RTE_PTR_DIFF(buf_addr, buf);
+ shinfo = &buf->shinfos[strd_idx];
+ rte_mbuf_ext_refcnt_set(shinfo, 1);
/*
* EXT_ATTACHED_MBUF will be set to pkt->ol_flags when
* attaching the stride to mbuf and more offload flags
* will be added below by calling rxq_cq_to_mbuf().
* Other fields will be overwritten.
*/
- rte_pktmbuf_attach_extbuf(pkt, addr, buf_iova, buf_len,
- shinfo);
- rte_pktmbuf_reset_headroom(pkt);
+ rte_pktmbuf_attach_extbuf(pkt, buf_addr, buf_iova,
+ buf_len, shinfo);
+ /* Set mbuf head-room. */
+ pkt->data_off = headroom_sz;
assert(pkt->ol_flags == EXT_ATTACHED_MBUF);
/*
* Prevent potential overflow due to MTU change through
++rxq->stats.idropped;
continue;
}
+ DATA_LEN(pkt) = len;
+ /*
+ * LRO packet may consume all the stride memory, in this
+ * case packet head-room space is not guaranteed so must
+ * to add an empty mbuf for the head-room.
+ */
+ if (!rxq->strd_headroom_en) {
+ struct rte_mbuf *headroom_mbuf =
+ rte_pktmbuf_alloc(rxq->mp);
+
+ if (unlikely(headroom_mbuf == NULL)) {
+ rte_pktmbuf_free_seg(pkt);
+ ++rxq->stats.rx_nombuf;
+ break;
+ }
+ PORT(pkt) = rxq->port_id;
+ NEXT(headroom_mbuf) = pkt;
+ pkt = headroom_mbuf;
+ NB_SEGS(pkt) = 2;
+ }
}
rxq_cq_to_mbuf(rxq, pkt, cqe, rss_hash_res);
+ if (lro_num_seg > 1) {
+ mlx5_lro_update_hdr(addr, cqe, len);
+ pkt->ol_flags |= PKT_RX_LRO;
+ pkt->tso_segsz = strd_sz;
+ }
PKT_LEN(pkt) = len;
- DATA_LEN(pkt) = len;
PORT(pkt) = rxq->port_id;
#ifdef MLX5_PMD_SOFT_COUNTERS
/* Increment bytes counter. */
(pkts_n - part) * sizeof(struct rte_mbuf *));
}
+/**
+ * Update completion queue consuming index via doorbell
+ * and flush the completed data buffers.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param valid CQE pointer
+ * if not NULL update txq->wqe_pi and flush the buffers
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_comp_flush(struct mlx5_txq_data *restrict txq,
+ volatile struct mlx5_cqe *last_cqe,
+ unsigned int olx __rte_unused)
+{
+ if (likely(last_cqe != NULL)) {
+ uint16_t tail;
+
+ txq->wqe_pi = rte_be_to_cpu_16(last_cqe->wqe_counter);
+ tail = ((volatile struct mlx5_wqe_cseg *)
+ (txq->wqes + (txq->wqe_pi & txq->wqe_m)))->misc;
+ if (likely(tail != txq->elts_tail)) {
+ mlx5_tx_free_elts(txq, tail, olx);
+ assert(tail == txq->elts_tail);
+ }
+ }
+}
+
/**
* Manage TX completions. This routine checks the CQ for
* arrived CQEs, deduces the last accomplished WQE in SQ,
mlx5_tx_handle_completion(struct mlx5_txq_data *restrict txq,
unsigned int olx __rte_unused)
{
- bool update = false;
+ unsigned int count = MLX5_TX_COMP_MAX_CQE;
+ volatile struct mlx5_cqe *last_cqe = NULL;
+ uint16_t ci = txq->cq_ci;
int ret;
+ static_assert(MLX5_CQE_STATUS_HW_OWN < 0, "Must be negative value");
+ static_assert(MLX5_CQE_STATUS_SW_OWN < 0, "Must be negative value");
do {
- volatile struct mlx5_wqe_cseg *cseg;
volatile struct mlx5_cqe *cqe;
- uint16_t tail;
- cqe = &txq->cqes[txq->cq_ci & txq->cqe_m];
- ret = check_cqe(cqe, txq->cqe_s, txq->cq_ci);
+ cqe = &txq->cqes[ci & txq->cqe_m];
+ ret = check_cqe(cqe, txq->cqe_s, ci);
if (unlikely(ret != MLX5_CQE_STATUS_SW_OWN)) {
if (likely(ret != MLX5_CQE_STATUS_ERR)) {
/* No new CQEs in completion queue. */
assert(ret == MLX5_CQE_STATUS_HW_OWN);
- if (likely(update)) {
- /* Update the consumer index. */
- rte_compiler_barrier();
- *txq->cq_db =
- rte_cpu_to_be_32(txq->cq_ci);
- }
- return;
+ break;
}
- /* Some error occurred, try to restart. */
+ /*
+ * Some error occurred, try to restart.
+ * We have no barrier after WQE related Doorbell
+ * written, make sure all writes are completed
+ * here, before we might perform SQ reset.
+ */
rte_wmb();
- tail = mlx5_tx_error_cqe_handle
+ ret = mlx5_tx_error_cqe_handle
(txq, (volatile struct mlx5_err_cqe *)cqe);
- } else {
- /* Normal transmit completion. */
- ++txq->cq_ci;
- rte_cio_rmb();
- txq->wqe_pi = rte_be_to_cpu_16(cqe->wqe_counter);
- cseg = (volatile struct mlx5_wqe_cseg *)
- (txq->wqes + (txq->wqe_pi & txq->wqe_m));
- tail = cseg->misc;
+ if (unlikely(ret < 0)) {
+ /*
+ * Some error occurred on queue error
+ * handling, we do not advance the index
+ * here, allowing to retry on next call.
+ */
+ return;
+ }
+ /*
+ * We are going to fetch all entries with
+ * MLX5_CQE_SYNDROME_WR_FLUSH_ERR status.
+ */
+ ++ci;
+ continue;
}
+ /* Normal transmit completion. */
+ ++ci;
+ last_cqe = cqe;
#ifndef NDEBUG
if (txq->cq_pi)
--txq->cq_pi;
#endif
- if (likely(tail != txq->elts_tail)) {
- /* Free data buffers from elts. */
- mlx5_tx_free_elts(txq, tail, olx);
- assert(tail == txq->elts_tail);
- }
- update = true;
+ /*
+ * We have to restrict the amount of processed CQEs
+ * in one tx_burst routine call. The CQ may be large
+ * and many CQEs may be updated by the NIC in one
+ * transaction. Buffers freeing is time consuming,
+ * multiple iterations may introduce significant
+ * latency.
+ */
+ if (--count == 0)
+ break;
} while (true);
+ if (likely(ci != txq->cq_ci)) {
+ /*
+ * Update completion queue consuming index
+ * and ring doorbell to notify hardware.
+ */
+ rte_compiler_barrier();
+ txq->cq_ci = ci;
+ *txq->cq_db = rte_cpu_to_be_32(ci);
+ mlx5_tx_comp_flush(txq, last_cqe, olx);
+ }
}
/**
*
* @param txq
* Pointer to TX queue structure.
- * @param n_mbuf
- * Number of mbuf not stored yet in elts array.
* @param loc
* Pointer to burst routine local context.
* @param olx
*/
static __rte_always_inline void
mlx5_tx_request_completion(struct mlx5_txq_data *restrict txq,
- unsigned int n_mbuf,
struct mlx5_txq_local *restrict loc,
- unsigned int olx __rte_unused)
+ unsigned int olx)
{
- uint16_t head = txq->elts_head + n_mbuf;
+ uint16_t head = txq->elts_head;
+ unsigned int part;
+ part = MLX5_TXOFF_CONFIG(INLINE) ?
+ 0 : loc->pkts_sent - loc->pkts_copy;
+ head += part;
if ((uint16_t)(head - txq->elts_comp) >= MLX5_TX_COMP_THRESH ||
- (uint16_t)(txq->wqe_ci - txq->wqe_comp) >= txq->wqe_thres) {
+ (MLX5_TXOFF_CONFIG(INLINE) &&
+ (uint16_t)(txq->wqe_ci - txq->wqe_comp) >= txq->wqe_thres)) {
volatile struct mlx5_wqe *last = loc->wqe_last;
txq->elts_comp = head;
- txq->wqe_comp = txq->wqe_ci;
+ if (MLX5_TXOFF_CONFIG(INLINE))
+ txq->wqe_comp = txq->wqe_ci;
/* Request unconditional completion on last WQE. */
last->cseg.flags = RTE_BE32(MLX5_COMP_ALWAYS <<
MLX5_COMP_MODE_OFFSET);
{
struct mlx5_wqe_cseg *restrict cs = &wqe->cseg;
+ /* For legacy MPW replace the EMPW by TSO with modifier. */
+ if (MLX5_TXOFF_CONFIG(MPW) && opcode == MLX5_OPCODE_ENHANCED_MPSW)
+ opcode = MLX5_OPCODE_TSO | MLX5_OPC_MOD_MPW << 24;
cs->opcode = rte_cpu_to_be_32((txq->wqe_ci << 8) | opcode);
cs->sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
cs->flags = RTE_BE32(MLX5_COMP_ONLY_FIRST_ERR <<
es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
/* Fill metadata field if needed. */
es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_METADATA ?
- loc->mbuf->tx_metadata : 0 : 0;
+ loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
/* Engage VLAN tag insertion feature if requested. */
if (MLX5_TXOFF_CONFIG(VLAN) &&
loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
/* Fill metadata field if needed. */
es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_METADATA ?
- loc->mbuf->tx_metadata : 0 : 0;
+ loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
(sizeof(uint16_t) +
sizeof(rte_v128u32_t)),
es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
/* Fill metadata field if needed. */
es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_METADATA ?
- loc->mbuf->tx_metadata : 0 : 0;
+ loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
(sizeof(uint16_t) +
sizeof(rte_v128u32_t)),
es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
/* Fill metadata field if needed. */
es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_METADATA ?
- loc->mbuf->tx_metadata : 0 : 0;
+ loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
(sizeof(uint16_t) +
sizeof(rte_v128u32_t)),
sizeof(struct rte_vlan_hdr) +
2 * RTE_ETHER_ADDR_LEN),
"invalid Ethernet Segment data size");
- assert(inlen > MLX5_ESEG_MIN_INLINE_SIZE);
+ assert(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
es->inline_hdr_sz = rte_cpu_to_be_16(inlen);
pdst = (uint8_t *)&es->inline_data;
if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
/* Unrolled implementation of generic rte_memcpy. */
dst = (uintptr_t)&dseg->inline_data[0];
src = (uintptr_t)buf;
+ if (len & 0x08) {
#ifdef RTE_ARCH_STRICT_ALIGN
- memcpy(dst, src, len);
+ assert(dst == RTE_PTR_ALIGN(dst, sizeof(uint32_t)));
+ *(uint32_t *)dst = *(unaligned_uint32_t *)src;
+ dst += sizeof(uint32_t);
+ src += sizeof(uint32_t);
+ *(uint32_t *)dst = *(unaligned_uint32_t *)src;
+ dst += sizeof(uint32_t);
+ src += sizeof(uint32_t);
#else
- if (len & 0x08) {
- *(uint64_t *)dst = *(uint64_t *)src;
+ *(uint64_t *)dst = *(unaligned_uint64_t *)src;
dst += sizeof(uint64_t);
src += sizeof(uint64_t);
+#endif
}
if (len & 0x04) {
- *(uint32_t *)dst = *(uint32_t *)src;
+ *(uint32_t *)dst = *(unaligned_uint32_t *)src;
dst += sizeof(uint32_t);
src += sizeof(uint32_t);
}
if (len & 0x02) {
- *(uint16_t *)dst = *(uint16_t *)src;
+ *(uint16_t *)dst = *(unaligned_uint16_t *)src;
dst += sizeof(uint16_t);
src += sizeof(uint16_t);
}
if (len & 0x01)
*(uint8_t *)dst = *(uint8_t *)src;
-#endif
}
/**
memcpy(pdst, buf, MLX5_DSEG_MIN_INLINE_SIZE);
buf += MLX5_DSEG_MIN_INLINE_SIZE;
pdst += MLX5_DSEG_MIN_INLINE_SIZE;
+ len -= MLX5_DSEG_MIN_INLINE_SIZE;
/* Insert VLAN ethertype + VLAN tag. Pointer is aligned. */
assert(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
+ if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
+ pdst = (uint8_t *)txq->wqes;
*(uint32_t *)pdst = rte_cpu_to_be_32((RTE_ETHER_TYPE_VLAN << 16) |
loc->mbuf->vlan_tci);
pdst += sizeof(struct rte_vlan_hdr);
- if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
- pdst = (uint8_t *)txq->wqes;
/*
* The WQEBB space availability is checked by caller.
* Here we should be aware of WQE ring buffer wraparound only.
continue;
/* Here ends the series of multi-segment packets. */
if (MLX5_TXOFF_CONFIG(TSO) &&
- unlikely(!(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)))
+ unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG))
return MLX5_TXCMP_CODE_TSO;
return MLX5_TXCMP_CODE_SINGLE;
}
if (MLX5_TXOFF_CONFIG(MULTI) &&
unlikely(NB_SEGS(loc->mbuf) > 1))
return MLX5_TXCMP_CODE_MULTI;
- if (unlikely(!(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)))
+ if (likely(!(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)))
return MLX5_TXCMP_CODE_SINGLE;
/* Continue with the next TSO packet. */
}
/**
* Check the next packet attributes to match with the eMPW batch ones.
+ * In addition, for legacy MPW the packet length is checked either.
*
* @param txq
* Pointer to TX queue structure.
* Pointer to Ethernet Segment of eMPW batch.
* @param loc
* Pointer to burst routine local context.
+ * @param dlen
+ * Length of previous packet in MPW descriptor.
* @param olx
* Configured Tx offloads mask. It is fully defined at
* compile time and may be used for optimization.
mlx5_tx_match_empw(struct mlx5_txq_data *restrict txq __rte_unused,
struct mlx5_wqe_eseg *restrict es,
struct mlx5_txq_local *restrict loc,
+ uint32_t dlen,
unsigned int olx)
{
uint8_t swp_flags = 0;
return false;
/* Fill metadata field if needed. */
if (MLX5_TXOFF_CONFIG(METADATA) &&
- es->metadata != (loc->mbuf->ol_flags & PKT_TX_METADATA ?
- loc->mbuf->tx_metadata : 0))
+ es->metadata != (loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0))
+ return false;
+ /* Legacy MPW can send packets with the same lengt only. */
+ if (MLX5_TXOFF_CONFIG(MPW) &&
+ dlen != rte_pktmbuf_data_len(loc->mbuf))
return false;
/* There must be no VLAN packets in eMPW loop. */
if (MLX5_TXOFF_CONFIG(VLAN))
unsigned int slen = 0;
next_empw:
- part = RTE_MIN(pkts_n, MLX5_EMPW_MAX_PACKETS);
+ assert(NB_SEGS(loc->mbuf) == 1);
+ part = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
+ MLX5_MPW_MAX_PACKETS :
+ MLX5_EMPW_MAX_PACKETS);
if (unlikely(loc->elts_free < part)) {
/* We have no enough elts to save all mbufs. */
if (unlikely(loc->elts_free < MLX5_EMPW_MIN_PACKETS))
eseg = &loc->wqe_last->eseg;
dseg = &loc->wqe_last->dseg[0];
loop = part;
+ /* Store the packet length for legacy MPW. */
+ if (MLX5_TXOFF_CONFIG(MPW))
+ eseg->mss = rte_cpu_to_be_16
+ (rte_pktmbuf_data_len(loc->mbuf));
for (;;) {
uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
#ifdef MLX5_PMD_SOFT_COUNTERS
return MLX5_TXCMP_CODE_EXIT;
return MLX5_TXCMP_CODE_MULTI;
}
+ assert(NB_SEGS(loc->mbuf) == 1);
if (ret == MLX5_TXCMP_CODE_TSO) {
part -= loop;
mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
* - check sum settings
* - metadata value
* - software parser settings
+ * - packets length (legacy MPW only)
*/
- if (!mlx5_tx_match_empw(txq, eseg, loc, olx)) {
+ if (!mlx5_tx_match_empw(txq, eseg, loc, dlen, olx)) {
assert(loop);
part -= loop;
mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
if (unlikely(!loc->elts_free ||
!loc->wqe_free))
return MLX5_TXCMP_CODE_EXIT;
+ pkts_n -= part;
goto next_empw;
}
/* Packet attributes match, continue the same eMPW. */
struct mlx5_wqe_dseg *restrict dseg;
struct mlx5_wqe_eseg *restrict eseg;
enum mlx5_txcmp_code ret;
- unsigned int room, part;
+ unsigned int room, part, nlim;
unsigned int slen = 0;
-next_empw:
+ assert(NB_SEGS(loc->mbuf) == 1);
+ /*
+ * Limits the amount of packets in one WQE
+ * to improve CQE latency generation.
+ */
+ nlim = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
+ MLX5_MPW_INLINE_MAX_PACKETS :
+ MLX5_EMPW_MAX_PACKETS);
/* Check whether we have minimal amount WQEs */
if (unlikely(loc->wqe_free <
((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
olx & ~MLX5_TXOFF_CONFIG_VLAN);
eseg = &loc->wqe_last->eseg;
dseg = &loc->wqe_last->dseg[0];
+ /* Store the packet length for legacy MPW. */
+ if (MLX5_TXOFF_CONFIG(MPW))
+ eseg->mss = rte_cpu_to_be_16
+ (rte_pktmbuf_data_len(loc->mbuf));
room = RTE_MIN(MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE,
loc->wqe_free) * MLX5_WQE_SIZE -
MLX5_WQE_CSEG_SIZE -
mlx5_tx_idone_empw(txq, loc, part, slen, olx);
return MLX5_TXCMP_CODE_EXIT;
}
- /* Check if we have minimal room left. */
- if (room < MLX5_WQE_DSEG_SIZE) {
- part -= room;
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
- goto next_empw;
- }
loc->mbuf = *pkts++;
if (likely(pkts_n > 1))
rte_prefetch0(*pkts);
return MLX5_TXCMP_CODE_EXIT;
return MLX5_TXCMP_CODE_MULTI;
}
+ assert(NB_SEGS(loc->mbuf) == 1);
if (ret == MLX5_TXCMP_CODE_TSO) {
part -= room;
mlx5_tx_idone_empw(txq, loc, part, slen, olx);
mlx5_tx_idone_empw(txq, loc, part, slen, olx);
return MLX5_TXCMP_CODE_ERROR;
}
+ /* Check if we have minimal room left. */
+ nlim--;
+ if (unlikely(!nlim || room < MLX5_WQE_DSEG_SIZE))
+ break;
/*
* Check whether packet parameters coincide
* within assumed eMPW batch:
* - check sum settings
* - metadata value
* - software parser settings
+ * - packets length (legacy MPW only)
*/
- if (!mlx5_tx_match_empw(txq, eseg, loc, olx))
+ if (!mlx5_tx_match_empw(txq, eseg, loc, dlen, olx))
break;
/* Packet attributes match, continue the same eMPW. */
if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
if (unlikely(!loc->elts_free ||
!loc->wqe_free))
return MLX5_TXCMP_CODE_EXIT;
- goto next_empw;
+ /* Continue the loop with new eMPW session. */
}
assert(false);
}
* free the packet immediately.
*/
rte_pktmbuf_free_seg(loc->mbuf);
- } else if (!MLX5_TXOFF_CONFIG(EMPW) &&
- txq->inlen_mode) {
+ } else if ((!MLX5_TXOFF_CONFIG(EMPW) ||
+ MLX5_TXOFF_CONFIG(MPW)) &&
+ txq->inlen_mode) {
/*
* If minimal inlining is requested the eMPW
* feature should be disabled due to data is
assert(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
assert(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
+ if (unlikely(!pkts_n))
+ return 0;
+ loc.pkts_sent = 0;
+ loc.pkts_copy = 0;
+ loc.wqe_last = NULL;
+
+send_loop:
+ loc.pkts_loop = loc.pkts_sent;
/*
* Check if there are some CQEs, if any:
* - process an encountered errors
* - free related mbufs
* - doorbell the NIC about processed CQEs
*/
- if (unlikely(!pkts_n))
- return 0;
- rte_prefetch0(*pkts);
+ rte_prefetch0(*(pkts + loc.pkts_sent));
mlx5_tx_handle_completion(txq, olx);
/*
* Calculate the number of available resources - elts and WQEs.
loc.wqe_free = txq->wqe_s -
(uint16_t)(txq->wqe_ci - txq->wqe_pi);
if (unlikely(!loc.elts_free || !loc.wqe_free))
- return 0;
- loc.pkts_sent = 0;
- loc.pkts_copy = 0;
- loc.wqe_last = NULL;
+ goto burst_exit;
for (;;) {
/*
* Fetch the packet from array. Usually this is
*/
assert(MLX5_TXOFF_CONFIG(INLINE) || loc.pkts_sent >= loc.pkts_copy);
/* Take a shortcut if nothing is sent. */
- if (unlikely(loc.pkts_sent == 0))
- return 0;
- /* Not all of the mbufs may be stored into elts yet. */
- part = MLX5_TXOFF_CONFIG(INLINE) ? 0 : loc.pkts_sent - loc.pkts_copy;
- mlx5_tx_request_completion(txq, part, &loc, olx);
+ if (unlikely(loc.pkts_sent == loc.pkts_loop))
+ goto burst_exit;
+ /* Request CQE generation if limits are reached. */
+ mlx5_tx_request_completion(txq, &loc, olx);
/*
* Ring QP doorbell immediately after WQE building completion
* to improve latencies. The pure software related data treatment
* can be completed after doorbell. Tx CQEs for this SQ are
* processed in this thread only by the polling.
+ *
+ * The rdma core library can map doorbell register in two ways,
+ * depending on the environment variable "MLX5_SHUT_UP_BF":
+ *
+ * - as regular cached memory, the variable is either missing or
+ * set to zero. This type of mapping may cause the significant
+ * doorbell register writing latency and requires explicit
+ * memory write barrier to mitigate this issue and prevent
+ * write combining.
+ *
+ * - as non-cached memory, the variable is present and set to
+ * not "0" value. This type of mapping may cause performance
+ * impact under heavy loading conditions but the explicit write
+ * memory barrier is not required and it may improve core
+ * performance.
+ *
+ * - the legacy behaviour (prior 19.08 release) was to use some
+ * heuristics to decide whether write memory barrier should
+ * be performed. This behavior is supported with specifying
+ * tx_db_nc=2, write barrier is skipped if application
+ * provides the full recommended burst of packets, it
+ * supposes the next packets are coming and the write barrier
+ * will be issued on the next burst (after descriptor writing,
+ * at least).
*/
- mlx5_tx_dbrec_cond_wmb(txq, loc.wqe_last, 0);
+ mlx5_tx_dbrec_cond_wmb(txq, loc.wqe_last, !txq->db_nc &&
+ (!txq->db_heu || pkts_n % MLX5_TX_DEFAULT_BURST));
+ /* Not all of the mbufs may be stored into elts yet. */
+ part = MLX5_TXOFF_CONFIG(INLINE) ? 0 : loc.pkts_sent - loc.pkts_copy;
if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
/*
* There are some single-segment mbufs not stored in elts.
- * It can be only if last packet was single-segment.
+ * It can be only if the last packet was single-segment.
* The copying is gathered into one place due to it is
* a good opportunity to optimize that with SIMD.
* Unfortunately if inlining is enabled the gaps in
* inlined mbufs.
*/
mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy, part, olx);
+ loc.pkts_copy = loc.pkts_sent;
+ }
+ assert(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
+ assert(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
+ if (pkts_n > loc.pkts_sent) {
+ /*
+ * If burst size is large there might be no enough CQE
+ * fetched from completion queue and no enough resources
+ * freed to send all the packets.
+ */
+ goto send_loop;
}
+burst_exit:
#ifdef MLX5_PMD_SOFT_COUNTERS
/* Increment sent packets counter. */
txq->stats.opackets += loc.pkts_sent;
#endif
- assert(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
- assert(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
return loc.pkts_sent;
}
MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
MLX5_TXOFF_CONFIG_METADATA)
+/*
+ * Generate routines with Legacy Multi-Packet Write support.
+ * This mode is supported by ConnectX-4LX only and imposes
+ * offload limitations, not supported:
+ * - ACL/Flows (metadata are becoming meaningless)
+ * - WQE Inline headers
+ * - SRIOV (E-Switch offloads)
+ * - VLAN insertion
+ * - tunnel encapsulation/decapsulation
+ * - TSO
+ */
+MLX5_TXOFF_DECL(none_mpw,
+ MLX5_TXOFF_CONFIG_NONE | MLX5_TXOFF_CONFIG_EMPW |
+ MLX5_TXOFF_CONFIG_MPW)
+
+MLX5_TXOFF_DECL(mci_mpw,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_CSUM |
+ MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_EMPW |
+ MLX5_TXOFF_CONFIG_MPW)
+
+MLX5_TXOFF_DECL(mc_mpw,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_CSUM |
+ MLX5_TXOFF_CONFIG_EMPW | MLX5_TXOFF_CONFIG_MPW)
+
+MLX5_TXOFF_DECL(i_mpw,
+ MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_EMPW |
+ MLX5_TXOFF_CONFIG_MPW)
+
/*
* Array of declared and compiled Tx burst function and corresponding
* supported offloads set. The array is used to select the Tx burst
MLX5_TXOFF_CONFIG_INLINE |
MLX5_TXOFF_CONFIG_METADATA)
-
MLX5_TXOFF_INFO(mtv,
MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
MLX5_TXOFF_CONFIG_VLAN |
MLX5_TXOFF_INFO(iv,
MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
MLX5_TXOFF_CONFIG_METADATA)
+
+MLX5_TXOFF_INFO(none_mpw,
+ MLX5_TXOFF_CONFIG_NONE | MLX5_TXOFF_CONFIG_EMPW |
+ MLX5_TXOFF_CONFIG_MPW)
+
+MLX5_TXOFF_INFO(mci_mpw,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_CSUM |
+ MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_EMPW |
+ MLX5_TXOFF_CONFIG_MPW)
+
+MLX5_TXOFF_INFO(mc_mpw,
+ MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_CSUM |
+ MLX5_TXOFF_CONFIG_EMPW | MLX5_TXOFF_CONFIG_MPW)
+
+MLX5_TXOFF_INFO(i_mpw,
+ MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_EMPW |
+ MLX5_TXOFF_CONFIG_MPW)
};
/**
if (config->mps == MLX5_MPW_ENHANCED &&
config->txq_inline_min <= 0) {
/*
- * The NIC supports Enhanced Multi-Packet Write.
- * We do not support legacy MPW due to its
- * hardware related problems, so we just ignore
- * legacy MLX5_MPW settings. There should be no
- * minimal required inline data.
+ * The NIC supports Enhanced Multi-Packet Write
+ * and does not require minimal inline data.
*/
olx |= MLX5_TXOFF_CONFIG_EMPW;
}
- if (tx_offloads & DEV_TX_OFFLOAD_MATCH_METADATA) {
+ if (rte_flow_dynf_metadata_avail()) {
/* We should support Flow metadata. */
olx |= MLX5_TXOFF_CONFIG_METADATA;
}
+ if (config->mps == MLX5_MPW) {
+ /*
+ * The NIC supports Legacy Multi-Packet Write.
+ * The MLX5_TXOFF_CONFIG_MPW controls the
+ * descriptor building method in combination
+ * with MLX5_TXOFF_CONFIG_EMPW.
+ */
+ if (!(olx & (MLX5_TXOFF_CONFIG_TSO |
+ MLX5_TXOFF_CONFIG_SWP |
+ MLX5_TXOFF_CONFIG_VLAN |
+ MLX5_TXOFF_CONFIG_METADATA)))
+ olx |= MLX5_TXOFF_CONFIG_EMPW |
+ MLX5_TXOFF_CONFIG_MPW;
+ }
/*
* Scan the routines table to find the minimal
* satisfying routine with requested offloads.
DRV_LOG(DEBUG, "\tVLANI (VLAN insertion)");
if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_METADATA)
DRV_LOG(DEBUG, "\tMETAD (tx Flow metadata)");
- if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_EMPW)
- DRV_LOG(DEBUG, "\tEMPW (Enhanced MPW)");
+ if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_EMPW) {
+ if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_MPW)
+ DRV_LOG(DEBUG, "\tMPW (Legacy MPW)");
+ else
+ DRV_LOG(DEBUG, "\tEMPW (Enhanced MPW)");
+ }
return txoff_func[m].func;
}
-
-