#include "mlx5_autoconf.h"
#include "mlx5_mr.h"
-/* Support tunnel matching. */
-#define MLX5_FLOW_TUNNEL 10
/* Mbuf dynamic flag offset for inline. */
extern uint64_t rte_net_mlx5_dynf_inline_mask;
-struct mlx5_rxq_stats {
-#ifdef MLX5_PMD_SOFT_COUNTERS
- uint64_t ipackets; /**< Total of successfully received packets. */
- uint64_t ibytes; /**< Total of successfully received bytes. */
-#endif
- uint64_t idropped; /**< Total of packets dropped when RX ring full. */
- uint64_t rx_nombuf; /**< Total of RX mbuf allocation failures. */
-};
-
struct mlx5_txq_stats {
#ifdef MLX5_PMD_SOFT_COUNTERS
uint64_t opackets; /**< Total of successfully sent packets. */
struct mlx5_priv;
-/* Compressed CQE context. */
-struct rxq_zip {
- uint16_t ai; /* Array index. */
- uint16_t ca; /* Current array index. */
- uint16_t na; /* Next array index. */
- uint16_t cq_ci; /* The next CQE. */
- uint32_t cqe_cnt; /* Number of CQEs. */
-};
-
-/* Multi-Packet RQ buffer header. */
-struct mlx5_mprq_buf {
- struct rte_mempool *mp;
- uint16_t refcnt; /* Atomically accessed refcnt. */
- uint8_t pad[RTE_PKTMBUF_HEADROOM]; /* Headroom for the first packet. */
- struct rte_mbuf_ext_shared_info shinfos[];
- /*
- * Shared information per stride.
- * More memory will be allocated for the first stride head-room and for
- * the strides data.
- */
-} __rte_cache_aligned;
-
-/* Get pointer to the first stride. */
-#define mlx5_mprq_buf_addr(ptr, strd_n) (RTE_PTR_ADD((ptr), \
- sizeof(struct mlx5_mprq_buf) + \
- (strd_n) * \
- sizeof(struct rte_mbuf_ext_shared_info) + \
- RTE_PKTMBUF_HEADROOM))
-
-#define MLX5_MIN_SINGLE_STRIDE_LOG_NUM_BYTES 6
-#define MLX5_MIN_SINGLE_WQE_LOG_NUM_STRIDES 9
-
-enum mlx5_rxq_err_state {
- MLX5_RXQ_ERR_STATE_NO_ERROR = 0,
- MLX5_RXQ_ERR_STATE_NEED_RESET,
- MLX5_RXQ_ERR_STATE_NEED_READY,
-};
-
-enum mlx5_rqx_code {
- MLX5_RXQ_CODE_EXIT = 0,
- MLX5_RXQ_CODE_NOMBUF,
- MLX5_RXQ_CODE_DROPPED,
-};
-
-struct mlx5_eth_rxseg {
- struct rte_mempool *mp; /**< Memory pool to allocate segment from. */
- uint16_t length; /**< Segment data length, configures split point. */
- uint16_t offset; /**< Data offset from beginning of mbuf data buffer. */
- uint32_t reserved; /**< Reserved field. */
-};
-
-/* RX queue descriptor. */
-struct mlx5_rxq_data {
- unsigned int csum:1; /* Enable checksum offloading. */
- unsigned int hw_timestamp:1; /* Enable HW timestamp. */
- unsigned int rt_timestamp:1; /* Realtime timestamp format. */
- unsigned int vlan_strip:1; /* Enable VLAN stripping. */
- unsigned int crc_present:1; /* CRC must be subtracted. */
- unsigned int sges_n:3; /* Log 2 of SGEs (max buffers per packet). */
- unsigned int cqe_n:4; /* Log 2 of CQ elements. */
- unsigned int elts_n:4; /* Log 2 of Mbufs. */
- unsigned int rss_hash:1; /* RSS hash result is enabled. */
- unsigned int mark:1; /* Marked flow available on the queue. */
- unsigned int strd_num_n:5; /* Log 2 of the number of stride. */
- unsigned int strd_sz_n:4; /* Log 2 of stride size. */
- unsigned int strd_shift_en:1; /* Enable 2bytes shift on a stride. */
- unsigned int err_state:2; /* enum mlx5_rxq_err_state. */
- unsigned int strd_scatter_en:1; /* Scattered packets from a stride. */
- unsigned int lro:1; /* Enable LRO. */
- unsigned int dynf_meta:1; /* Dynamic metadata is configured. */
- volatile uint32_t *rq_db;
- volatile uint32_t *cq_db;
- uint16_t port_id;
- uint32_t elts_ci;
- uint32_t rq_ci;
- uint16_t consumed_strd; /* Number of consumed strides in WQE. */
- uint32_t rq_pi;
- uint32_t cq_ci;
- uint16_t rq_repl_thresh; /* Threshold for buffer replenishment. */
- union {
- struct rxq_zip zip; /* Compressed context. */
- uint16_t decompressed;
- /* Number of ready mbufs decompressed from the CQ. */
- };
- struct mlx5_mr_ctrl mr_ctrl; /* MR control descriptor. */
- uint16_t mprq_max_memcpy_len; /* Maximum size of packet to memcpy. */
- volatile void *wqes;
- volatile struct mlx5_cqe(*cqes)[];
- struct rte_mbuf *(*elts)[];
- struct mlx5_mprq_buf *(*mprq_bufs)[];
- struct rte_mempool *mp;
- struct rte_mempool *mprq_mp; /* Mempool for Multi-Packet RQ. */
- struct mlx5_mprq_buf *mprq_repl; /* Stashed mbuf for replenish. */
- struct mlx5_dev_ctx_shared *sh; /* Shared context. */
- uint16_t idx; /* Queue index. */
- struct mlx5_rxq_stats stats;
- rte_xmm_t mbuf_initializer; /* Default rearm/flags for vectorized Rx. */
- struct rte_mbuf fake_mbuf; /* elts padding for vectorized Rx. */
- void *cq_uar; /* Verbs CQ user access region. */
- uint32_t cqn; /* CQ number. */
- uint8_t cq_arm_sn; /* CQ arm seq number. */
-#ifndef RTE_ARCH_64
- rte_spinlock_t *uar_lock_cq;
- /* CQ (UAR) access lock required for 32bit implementations */
-#endif
- uint32_t tunnel; /* Tunnel information. */
- int timestamp_offset; /* Dynamic mbuf field for timestamp. */
- uint64_t timestamp_rx_flag; /* Dynamic mbuf flag for timestamp. */
- uint64_t flow_meta_mask;
- int32_t flow_meta_offset;
- uint32_t rxseg_n; /* Number of split segment descriptions. */
- struct mlx5_eth_rxseg rxseg[MLX5_MAX_RXQ_NSEG];
- /* Buffer split segment descriptions - sizes, offsets, pools. */
-} __rte_cache_aligned;
-
-enum mlx5_rxq_type {
- MLX5_RXQ_TYPE_STANDARD, /* Standard Rx queue. */
- MLX5_RXQ_TYPE_HAIRPIN, /* Hairpin Rx queue. */
- MLX5_RXQ_TYPE_UNDEFINED,
-};
-
-/* RX queue control descriptor. */
-struct mlx5_rxq_ctrl {
- struct mlx5_rxq_data rxq; /* Data path structure. */
- LIST_ENTRY(mlx5_rxq_ctrl) next; /* Pointer to the next element. */
- uint32_t refcnt; /* Reference counter. */
- struct mlx5_rxq_obj *obj; /* Verbs/DevX elements. */
- struct mlx5_priv *priv; /* Back pointer to private data. */
- enum mlx5_rxq_type type; /* Rxq type. */
- unsigned int socket; /* CPU socket ID for allocations. */
- unsigned int irq:1; /* Whether IRQ is enabled. */
- uint32_t flow_mark_n; /* Number of Mark/Flag flows using this Queue. */
- uint32_t flow_tunnels_n[MLX5_FLOW_TUNNEL]; /* Tunnels counters. */
- uint32_t wqn; /* WQ number. */
- uint16_t dump_file_n; /* Number of dump files. */
- struct mlx5_devx_dbr_page *rq_dbrec_page;
- uint64_t rq_dbr_offset;
- /* Storing RQ door-bell information, needed when freeing door-bell. */
- struct mlx5_devx_dbr_page *cq_dbrec_page;
- uint64_t cq_dbr_offset;
- /* Storing CQ door-bell information, needed when freeing door-bell. */
- void *wq_umem; /* WQ buffer registration info. */
- void *cq_umem; /* CQ buffer registration info. */
- struct rte_eth_hairpin_conf hairpin_conf; /* Hairpin configuration. */
- uint32_t hairpin_status; /* Hairpin binding status. */
-};
-
/* TX queue send local data. */
__extension__
struct mlx5_txq_local {
uint16_t wqe_free; /* available wqe remain. */
uint16_t mbuf_off; /* data offset in current mbuf. */
uint16_t mbuf_nseg; /* number of remaining mbuf. */
+ uint16_t mbuf_free; /* number of inline mbufs to free. */
};
/* TX queue descriptor. */
uint16_t vlan_en:1; /* VLAN insertion in WQE is supported. */
uint16_t db_nc:1; /* Doorbell mapped to non-cached region. */
uint16_t db_heu:1; /* Doorbell heuristic write barrier. */
+ uint16_t fast_free:1; /* mbuf fast free on Tx is enabled. */
uint16_t inlen_send; /* Ordinary send data inline size. */
uint16_t inlen_empw; /* eMPW max packet size to inline. */
uint16_t inlen_mode; /* Minimal data length to inline. */
#define MLX5_TX_BFREG(txq) \
(MLX5_PROC_PRIV((txq)->port_id)->uar_table[(txq)->idx])
-/* mlx5_rxq.c */
-
-extern uint8_t rss_hash_default_key[];
-
-int mlx5_check_mprq_support(struct rte_eth_dev *dev);
-int mlx5_rxq_mprq_enabled(struct mlx5_rxq_data *rxq);
-int mlx5_mprq_enabled(struct rte_eth_dev *dev);
-unsigned int mlx5_rxq_cqe_num(struct mlx5_rxq_data *rxq_data);
-int mlx5_mprq_free_mp(struct rte_eth_dev *dev);
-int mlx5_mprq_alloc_mp(struct rte_eth_dev *dev);
-int mlx5_rx_queue_start(struct rte_eth_dev *dev, uint16_t queue_id);
-int mlx5_rx_queue_stop(struct rte_eth_dev *dev, uint16_t queue_id);
-int mlx5_rx_queue_start_primary(struct rte_eth_dev *dev, uint16_t queue_id);
-int mlx5_rx_queue_stop_primary(struct rte_eth_dev *dev, uint16_t queue_id);
-int mlx5_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
- unsigned int socket, const struct rte_eth_rxconf *conf,
- struct rte_mempool *mp);
-int mlx5_rx_hairpin_queue_setup
- (struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
- const struct rte_eth_hairpin_conf *hairpin_conf);
-void mlx5_rx_queue_release(void *dpdk_rxq);
-int mlx5_rx_intr_vec_enable(struct rte_eth_dev *dev);
-void mlx5_rx_intr_vec_disable(struct rte_eth_dev *dev);
-int mlx5_rx_intr_enable(struct rte_eth_dev *dev, uint16_t rx_queue_id);
-int mlx5_rx_intr_disable(struct rte_eth_dev *dev, uint16_t rx_queue_id);
-int mlx5_rxq_obj_verify(struct rte_eth_dev *dev);
-struct mlx5_rxq_ctrl *mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx,
- uint16_t desc, unsigned int socket,
- const struct rte_eth_rxconf *conf,
- const struct rte_eth_rxseg_split *rx_seg,
- uint16_t n_seg);
-struct mlx5_rxq_ctrl *mlx5_rxq_hairpin_new
- (struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
- const struct rte_eth_hairpin_conf *hairpin_conf);
-struct mlx5_rxq_ctrl *mlx5_rxq_get(struct rte_eth_dev *dev, uint16_t idx);
-int mlx5_rxq_release(struct rte_eth_dev *dev, uint16_t idx);
-int mlx5_rxq_verify(struct rte_eth_dev *dev);
-int rxq_alloc_elts(struct mlx5_rxq_ctrl *rxq_ctrl);
-int mlx5_ind_table_obj_verify(struct rte_eth_dev *dev);
-struct mlx5_ind_table_obj *mlx5_ind_table_obj_get(struct rte_eth_dev *dev,
- const uint16_t *queues,
- uint32_t queues_n);
-int mlx5_ind_table_obj_release(struct rte_eth_dev *dev,
- struct mlx5_ind_table_obj *ind_tbl,
- bool standalone);
-struct mlx5_cache_entry *mlx5_hrxq_create_cb(struct mlx5_cache_list *list,
- struct mlx5_cache_entry *entry __rte_unused, void *cb_ctx);
-int mlx5_hrxq_match_cb(struct mlx5_cache_list *list,
- struct mlx5_cache_entry *entry,
- void *cb_ctx);
-void mlx5_hrxq_remove_cb(struct mlx5_cache_list *list,
- struct mlx5_cache_entry *entry);
-uint32_t mlx5_hrxq_get(struct rte_eth_dev *dev,
- struct mlx5_flow_rss_desc *rss_desc);
-int mlx5_hrxq_release(struct rte_eth_dev *dev, uint32_t hxrq_idx);
-uint32_t mlx5_hrxq_verify(struct rte_eth_dev *dev);
-
-
-enum mlx5_rxq_type mlx5_rxq_get_type(struct rte_eth_dev *dev, uint16_t idx);
-const struct rte_eth_hairpin_conf *mlx5_rxq_get_hairpin_conf
- (struct rte_eth_dev *dev, uint16_t idx);
-struct mlx5_hrxq *mlx5_drop_action_create(struct rte_eth_dev *dev);
-void mlx5_drop_action_destroy(struct rte_eth_dev *dev);
-uint64_t mlx5_get_rx_port_offloads(void);
-uint64_t mlx5_get_rx_queue_offloads(struct rte_eth_dev *dev);
-void mlx5_rxq_timestamp_set(struct rte_eth_dev *dev);
-int mlx5_hrxq_modify(struct rte_eth_dev *dev, uint32_t hxrq_idx,
- const uint8_t *rss_key, uint32_t rss_key_len,
- uint64_t hash_fields,
- const uint16_t *queues, uint32_t queues_n);
-
/* mlx5_txq.c */
int mlx5_tx_queue_start(struct rte_eth_dev *dev, uint16_t queue_id);
void mlx5_set_ptype_table(void);
void mlx5_set_cksum_table(void);
void mlx5_set_swp_types_table(void);
-uint16_t mlx5_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n);
-void mlx5_rxq_initialize(struct mlx5_rxq_data *rxq);
-__rte_noinline int mlx5_rx_err_handle(struct mlx5_rxq_data *rxq, uint8_t vec);
-void mlx5_mprq_buf_free_cb(void *addr, void *opaque);
-void mlx5_mprq_buf_free(struct mlx5_mprq_buf *buf);
-uint16_t mlx5_rx_burst_mprq(void *dpdk_rxq, struct rte_mbuf **pkts,
- uint16_t pkts_n);
uint16_t removed_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts,
uint16_t pkts_n);
-uint16_t removed_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts,
- uint16_t pkts_n);
-int mlx5_rx_descriptor_status(void *rx_queue, uint16_t offset);
int mlx5_tx_descriptor_status(void *tx_queue, uint16_t offset);
-uint32_t mlx5_rx_queue_count(struct rte_eth_dev *dev, uint16_t rx_queue_id);
void mlx5_dump_debug_information(const char *path, const char *title,
const void *buf, unsigned int len);
int mlx5_queue_state_modify_primary(struct rte_eth_dev *dev,
const struct mlx5_mp_arg_queue_state_modify *sm);
-void mlx5_rxq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
- struct rte_eth_rxq_info *qinfo);
void mlx5_txq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
struct rte_eth_txq_info *qinfo);
-int mlx5_rx_burst_mode_get(struct rte_eth_dev *dev, uint16_t rx_queue_id,
- struct rte_eth_burst_mode *mode);
int mlx5_tx_burst_mode_get(struct rte_eth_dev *dev, uint16_t tx_queue_id,
struct rte_eth_burst_mode *mode);
-/* Vectorized version of mlx5_rxtx.c */
-int mlx5_rxq_check_vec_support(struct mlx5_rxq_data *rxq_data);
-int mlx5_check_vec_rx_support(struct rte_eth_dev *dev);
-uint16_t mlx5_rx_burst_vec(void *dpdk_txq, struct rte_mbuf **pkts,
- uint16_t pkts_n);
-uint16_t mlx5_rx_burst_mprq_vec(void *dpdk_txq, struct rte_mbuf **pkts,
- uint16_t pkts_n);
-
/* mlx5_mr.c */
void mlx5_mr_flush_local_cache(struct mlx5_mr_ctrl *mr_ctrl);
-uint32_t mlx5_rx_addr2mr_bh(struct mlx5_rxq_data *rxq, uintptr_t addr);
uint32_t mlx5_tx_mb2mr_bh(struct mlx5_txq_data *txq, struct rte_mbuf *mb);
uint32_t mlx5_tx_update_ext_mp(struct mlx5_txq_data *txq, uintptr_t addr,
struct rte_mempool *mp);
return buf->pool;
}
-/**
- * Query LKey from a packet buffer for Rx. No need to flush local caches for Rx
- * as mempool is pre-configured and static.
- *
- * @param rxq
- * Pointer to Rx queue structure.
- * @param addr
- * Address to search.
- *
- * @return
- * Searched LKey on success, UINT32_MAX on no match.
- */
-static __rte_always_inline uint32_t
-mlx5_rx_addr2mr(struct mlx5_rxq_data *rxq, uintptr_t addr)
-{
- struct mlx5_mr_ctrl *mr_ctrl = &rxq->mr_ctrl;
- uint32_t lkey;
-
- /* Linear search on MR cache array. */
- lkey = mlx5_mr_lookup_lkey(mr_ctrl->cache, &mr_ctrl->mru,
- MLX5_MR_CACHE_N, addr);
- if (likely(lkey != UINT32_MAX))
- return lkey;
- /* Take slower bottom-half (Binary Search) on miss. */
- return mlx5_rx_addr2mr_bh(rxq, addr);
-}
-
-#define mlx5_rx_mb2mr(rxq, mb) mlx5_rx_addr2mr(rxq, (uintptr_t)((mb)->buf_addr))
-
/**
* Query LKey from a packet buffer for Tx. If not found, add the mempool.
*
mlx5_tx_dbrec_cond_wmb(txq, wqe, 1);
}
-/**
- * Convert timestamp from HW format to linear counter
- * from Packet Pacing Clock Queue CQE timestamp format.
- *
- * @param sh
- * Pointer to the device shared context. Might be needed
- * to convert according current device configuration.
- * @param ts
- * Timestamp from CQE to convert.
- * @return
- * UTC in nanoseconds
- */
-static __rte_always_inline uint64_t
-mlx5_txpp_convert_rx_ts(struct mlx5_dev_ctx_shared *sh, uint64_t ts)
-{
- RTE_SET_USED(sh);
- return (ts & UINT32_MAX) + (ts >> 32) * NS_PER_S;
-}
-
/**
* Convert timestamp from mbuf format to linear counter
* of Clock Queue completions (24 bits)
return ci;
}
-/**
- * Set timestamp in mbuf dynamic field.
- *
- * @param mbuf
- * Structure to write into.
- * @param offset
- * Dynamic field offset in mbuf structure.
- * @param timestamp
- * Value to write.
- */
-static __rte_always_inline void
-mlx5_timestamp_set(struct rte_mbuf *mbuf, int offset,
- rte_mbuf_timestamp_t timestamp)
-{
- *RTE_MBUF_DYNFIELD(mbuf, offset, rte_mbuf_timestamp_t *) = timestamp;
-}
-
-/**
- * Replace MPRQ buffer.
- *
- * @param rxq
- * Pointer to Rx queue structure.
- * @param rq_idx
- * RQ index to replace.
- */
-static __rte_always_inline void
-mprq_buf_replace(struct mlx5_rxq_data *rxq, uint16_t rq_idx)
-{
- const uint32_t strd_n = 1 << rxq->strd_num_n;
- struct mlx5_mprq_buf *rep = rxq->mprq_repl;
- volatile struct mlx5_wqe_data_seg *wqe =
- &((volatile struct mlx5_wqe_mprq *)rxq->wqes)[rq_idx].dseg;
- struct mlx5_mprq_buf *buf = (*rxq->mprq_bufs)[rq_idx];
- void *addr;
-
- if (__atomic_load_n(&buf->refcnt, __ATOMIC_RELAXED) > 1) {
- MLX5_ASSERT(rep != NULL);
- /* Replace MPRQ buf. */
- (*rxq->mprq_bufs)[rq_idx] = rep;
- /* Replace WQE. */
- addr = mlx5_mprq_buf_addr(rep, strd_n);
- wqe->addr = rte_cpu_to_be_64((uintptr_t)addr);
- /* If there's only one MR, no need to replace LKey in WQE. */
- if (unlikely(mlx5_mr_btree_len(&rxq->mr_ctrl.cache_bh) > 1))
- wqe->lkey = mlx5_rx_addr2mr(rxq, (uintptr_t)addr);
- /* Stash a mbuf for next replacement. */
- if (likely(!rte_mempool_get(rxq->mprq_mp, (void **)&rep)))
- rxq->mprq_repl = rep;
- else
- rxq->mprq_repl = NULL;
- /* Release the old buffer. */
- mlx5_mprq_buf_free(buf);
- } else if (unlikely(rxq->mprq_repl == NULL)) {
- struct mlx5_mprq_buf *rep;
-
- /*
- * Currently, the MPRQ mempool is out of buffer
- * and doing memcpy regardless of the size of Rx
- * packet. Retry allocation to get back to
- * normal.
- */
- if (!rte_mempool_get(rxq->mprq_mp, (void **)&rep))
- rxq->mprq_repl = rep;
- }
-}
-
-/**
- * Attach or copy MPRQ buffer content to a packet.
- *
- * @param rxq
- * Pointer to Rx queue structure.
- * @param pkt
- * Pointer to a packet to fill.
- * @param len
- * Packet length.
- * @param buf
- * Pointer to a MPRQ buffer to take the data from.
- * @param strd_idx
- * Stride index to start from.
- * @param strd_cnt
- * Number of strides to consume.
- */
-static __rte_always_inline enum mlx5_rqx_code
-mprq_buf_to_pkt(struct mlx5_rxq_data *rxq, struct rte_mbuf *pkt, uint32_t len,
- struct mlx5_mprq_buf *buf, uint16_t strd_idx, uint16_t strd_cnt)
-{
- const uint32_t strd_n = 1 << rxq->strd_num_n;
- const uint16_t strd_sz = 1 << rxq->strd_sz_n;
- const uint16_t strd_shift =
- MLX5_MPRQ_STRIDE_SHIFT_BYTE * rxq->strd_shift_en;
- const int32_t hdrm_overlap =
- len + RTE_PKTMBUF_HEADROOM - strd_cnt * strd_sz;
- const uint32_t offset = strd_idx * strd_sz + strd_shift;
- void *addr = RTE_PTR_ADD(mlx5_mprq_buf_addr(buf, strd_n), offset);
-
- /*
- * Memcpy packets to the target mbuf if:
- * - The size of packet is smaller than mprq_max_memcpy_len.
- * - Out of buffer in the Mempool for Multi-Packet RQ.
- * - The packet's stride overlaps a headroom and scatter is off.
- */
- if (len <= rxq->mprq_max_memcpy_len ||
- rxq->mprq_repl == NULL ||
- (hdrm_overlap > 0 && !rxq->strd_scatter_en)) {
- if (likely(len <=
- (uint32_t)(pkt->buf_len - RTE_PKTMBUF_HEADROOM))) {
- rte_memcpy(rte_pktmbuf_mtod(pkt, void *),
- addr, len);
- DATA_LEN(pkt) = len;
- } else if (rxq->strd_scatter_en) {
- struct rte_mbuf *prev = pkt;
- uint32_t seg_len = RTE_MIN(len, (uint32_t)
- (pkt->buf_len - RTE_PKTMBUF_HEADROOM));
- uint32_t rem_len = len - seg_len;
-
- rte_memcpy(rte_pktmbuf_mtod(pkt, void *),
- addr, seg_len);
- DATA_LEN(pkt) = seg_len;
- while (rem_len) {
- struct rte_mbuf *next =
- rte_pktmbuf_alloc(rxq->mp);
-
- if (unlikely(next == NULL))
- return MLX5_RXQ_CODE_NOMBUF;
- NEXT(prev) = next;
- SET_DATA_OFF(next, 0);
- addr = RTE_PTR_ADD(addr, seg_len);
- seg_len = RTE_MIN(rem_len, (uint32_t)
- (next->buf_len - RTE_PKTMBUF_HEADROOM));
- rte_memcpy
- (rte_pktmbuf_mtod(next, void *),
- addr, seg_len);
- DATA_LEN(next) = seg_len;
- rem_len -= seg_len;
- prev = next;
- ++NB_SEGS(pkt);
- }
- } else {
- return MLX5_RXQ_CODE_DROPPED;
- }
- } else {
- rte_iova_t buf_iova;
- struct rte_mbuf_ext_shared_info *shinfo;
- uint16_t buf_len = strd_cnt * strd_sz;
- void *buf_addr;
-
- /* Increment the refcnt of the whole chunk. */
- __atomic_add_fetch(&buf->refcnt, 1, __ATOMIC_RELAXED);
- MLX5_ASSERT(__atomic_load_n(&buf->refcnt,
- __ATOMIC_RELAXED) <= strd_n + 1);
- buf_addr = RTE_PTR_SUB(addr, RTE_PKTMBUF_HEADROOM);
- /*
- * MLX5 device doesn't use iova but it is necessary in a
- * case where the Rx packet is transmitted via a
- * different PMD.
- */
- buf_iova = rte_mempool_virt2iova(buf) +
- RTE_PTR_DIFF(buf_addr, buf);
- shinfo = &buf->shinfos[strd_idx];
- rte_mbuf_ext_refcnt_set(shinfo, 1);
- /*
- * EXT_ATTACHED_MBUF will be set to pkt->ol_flags when
- * attaching the stride to mbuf and more offload flags
- * will be added below by calling rxq_cq_to_mbuf().
- * Other fields will be overwritten.
- */
- rte_pktmbuf_attach_extbuf(pkt, buf_addr, buf_iova,
- buf_len, shinfo);
- /* Set mbuf head-room. */
- SET_DATA_OFF(pkt, RTE_PKTMBUF_HEADROOM);
- MLX5_ASSERT(pkt->ol_flags == EXT_ATTACHED_MBUF);
- MLX5_ASSERT(rte_pktmbuf_tailroom(pkt) >=
- len - (hdrm_overlap > 0 ? hdrm_overlap : 0));
- DATA_LEN(pkt) = len;
- /*
- * Copy the last fragment of a packet (up to headroom
- * size bytes) in case there is a stride overlap with
- * a next packet's headroom. Allocate a separate mbuf
- * to store this fragment and link it. Scatter is on.
- */
- if (hdrm_overlap > 0) {
- MLX5_ASSERT(rxq->strd_scatter_en);
- struct rte_mbuf *seg =
- rte_pktmbuf_alloc(rxq->mp);
-
- if (unlikely(seg == NULL))
- return MLX5_RXQ_CODE_NOMBUF;
- SET_DATA_OFF(seg, 0);
- rte_memcpy(rte_pktmbuf_mtod(seg, void *),
- RTE_PTR_ADD(addr, len - hdrm_overlap),
- hdrm_overlap);
- DATA_LEN(seg) = hdrm_overlap;
- DATA_LEN(pkt) = len - hdrm_overlap;
- NEXT(pkt) = seg;
- NB_SEGS(pkt) = 2;
- }
- }
- return MLX5_RXQ_CODE_EXIT;
-}
-
#endif /* RTE_PMD_MLX5_RXTX_H_ */
git.droids-corp.org / dpdk.git / blobdiff