#include <mlx5_malloc.h>
#include "mlx5.h"
-#include "mlx5_mr.h"
+#include "mlx5_flow.h"
#include "mlx5_rx.h"
#include "mlx5_tx.h"
#include "mlx5_utils.h"
return -rte_errno;
}
+/**
+ * Register Rx queue mempools and fill the Rx queue cache.
+ * This function tolerates repeated mempool registration.
+ *
+ * @param[in] rxq_ctrl
+ * Rx queue control data.
+ *
+ * @return
+ * 0 on success, (-1) on failure and rte_errno is set.
+ */
+static int
+mlx5_rxq_mempool_register(struct mlx5_rxq_ctrl *rxq_ctrl)
+{
+ struct rte_mempool *mp;
+ uint32_t s;
+ int ret = 0;
+
+ mlx5_mr_flush_local_cache(&rxq_ctrl->rxq.mr_ctrl);
+ /* MPRQ mempool is registered on creation, just fill the cache. */
+ if (mlx5_rxq_mprq_enabled(&rxq_ctrl->rxq))
+ return mlx5_mr_mempool_populate_cache(&rxq_ctrl->rxq.mr_ctrl,
+ rxq_ctrl->rxq.mprq_mp);
+ for (s = 0; s < rxq_ctrl->rxq.rxseg_n; s++) {
+ bool is_extmem;
+
+ mp = rxq_ctrl->rxq.rxseg[s].mp;
+ is_extmem = (rte_pktmbuf_priv_flags(mp) &
+ RTE_PKTMBUF_POOL_F_PINNED_EXT_BUF) != 0;
+ ret = mlx5_mr_mempool_register(rxq_ctrl->sh->cdev, mp,
+ is_extmem);
+ if (ret < 0 && rte_errno != EEXIST)
+ return ret;
+ ret = mlx5_mr_mempool_populate_cache(&rxq_ctrl->rxq.mr_ctrl,
+ mp);
+ if (ret < 0)
+ return ret;
+ }
+ return 0;
+}
+
/**
* Stop traffic on Rx queues.
*
mlx5_rxq_release(dev, i);
}
+static int
+mlx5_rxq_ctrl_prepare(struct rte_eth_dev *dev, struct mlx5_rxq_ctrl *rxq_ctrl,
+ unsigned int idx)
+{
+ int ret = 0;
+
+ if (rxq_ctrl->type == MLX5_RXQ_TYPE_STANDARD) {
+ /*
+ * Pre-register the mempools. Regardless of whether
+ * the implicit registration is enabled or not,
+ * Rx mempool destruction is tracked to free MRs.
+ */
+ if (mlx5_rxq_mempool_register(rxq_ctrl) < 0)
+ return -rte_errno;
+ ret = rxq_alloc_elts(rxq_ctrl);
+ if (ret)
+ return ret;
+ }
+ MLX5_ASSERT(!rxq_ctrl->obj);
+ rxq_ctrl->obj = mlx5_malloc(MLX5_MEM_RTE | MLX5_MEM_ZERO,
+ sizeof(*rxq_ctrl->obj), 0,
+ rxq_ctrl->socket);
+ if (!rxq_ctrl->obj) {
+ DRV_LOG(ERR, "Port %u Rx queue %u can't allocate resources.",
+ dev->data->port_id, idx);
+ rte_errno = ENOMEM;
+ return -rte_errno;
+ }
+ DRV_LOG(DEBUG, "Port %u rxq %u updated with %p.", dev->data->port_id,
+ idx, (void *)&rxq_ctrl->obj);
+ return 0;
+}
+
/**
* Start traffic on Rx queues.
*
DRV_LOG(DEBUG, "Port %u device_attr.max_sge is %d.",
dev->data->port_id, priv->sh->device_attr.max_sge);
for (i = 0; i != priv->rxqs_n; ++i) {
- struct mlx5_rxq_ctrl *rxq_ctrl = mlx5_rxq_get(dev, i);
+ struct mlx5_rxq_priv *rxq = mlx5_rxq_ref(dev, i);
+ struct mlx5_rxq_ctrl *rxq_ctrl;
- if (!rxq_ctrl)
+ if (rxq == NULL)
continue;
- if (rxq_ctrl->type == MLX5_RXQ_TYPE_STANDARD) {
- /* Pre-register Rx mempools. */
- if (mlx5_rxq_mprq_enabled(&rxq_ctrl->rxq)) {
- mlx5_mr_update_mp(dev, &rxq_ctrl->rxq.mr_ctrl,
- rxq_ctrl->rxq.mprq_mp);
- } else {
- uint32_t s;
-
- for (s = 0; s < rxq_ctrl->rxq.rxseg_n; s++)
- mlx5_mr_update_mp
- (dev, &rxq_ctrl->rxq.mr_ctrl,
- rxq_ctrl->rxq.rxseg[s].mp);
- }
- ret = rxq_alloc_elts(rxq_ctrl);
- if (ret)
+ rxq_ctrl = rxq->ctrl;
+ if (!rxq_ctrl->started) {
+ if (mlx5_rxq_ctrl_prepare(dev, rxq_ctrl, i) < 0)
goto error;
+ LIST_INSERT_HEAD(&priv->rxqsobj, rxq_ctrl->obj, next);
}
- MLX5_ASSERT(!rxq_ctrl->obj);
- rxq_ctrl->obj = mlx5_malloc(MLX5_MEM_RTE | MLX5_MEM_ZERO,
- sizeof(*rxq_ctrl->obj), 0,
- rxq_ctrl->socket);
- if (!rxq_ctrl->obj) {
- DRV_LOG(ERR,
- "Port %u Rx queue %u can't allocate resources.",
- dev->data->port_id, (*priv->rxqs)[i]->idx);
- rte_errno = ENOMEM;
- goto error;
- }
- ret = priv->obj_ops.rxq_obj_new(dev, i);
+ ret = priv->obj_ops.rxq_obj_new(rxq);
if (ret) {
mlx5_free(rxq_ctrl->obj);
+ rxq_ctrl->obj = NULL;
goto error;
}
- DRV_LOG(DEBUG, "Port %u rxq %u updated with %p.",
- dev->data->port_id, i, (void *)&rxq_ctrl->obj);
- LIST_INSERT_HEAD(&priv->rxqsobj, rxq_ctrl->obj, next);
+ rxq_ctrl->started = true;
}
return 0;
error:
struct mlx5_devx_modify_sq_attr sq_attr = { 0 };
struct mlx5_devx_modify_rq_attr rq_attr = { 0 };
struct mlx5_txq_ctrl *txq_ctrl;
+ struct mlx5_rxq_priv *rxq;
struct mlx5_rxq_ctrl *rxq_ctrl;
struct mlx5_devx_obj *sq;
struct mlx5_devx_obj *rq;
txq_ctrl = mlx5_txq_get(dev, i);
if (!txq_ctrl)
continue;
- if (txq_ctrl->type != MLX5_TXQ_TYPE_HAIRPIN) {
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_HAIRPIN ||
+ txq_ctrl->hairpin_conf.peers[0].port != self_port) {
mlx5_txq_release(dev, i);
continue;
}
- if (txq_ctrl->hairpin_conf.peers[0].port != self_port)
- continue;
if (txq_ctrl->hairpin_conf.manual_bind) {
mlx5_txq_release(dev, i);
return 0;
txq_ctrl = mlx5_txq_get(dev, i);
if (!txq_ctrl)
continue;
- if (txq_ctrl->type != MLX5_TXQ_TYPE_HAIRPIN) {
+ /* Skip hairpin queues with other peer ports. */
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_HAIRPIN ||
+ txq_ctrl->hairpin_conf.peers[0].port != self_port) {
mlx5_txq_release(dev, i);
continue;
}
- /* Skip hairpin queues with other peer ports. */
- if (txq_ctrl->hairpin_conf.peers[0].port != self_port)
- continue;
if (!txq_ctrl->obj) {
rte_errno = ENOMEM;
DRV_LOG(ERR, "port %u no txq object found: %d",
return -rte_errno;
}
sq = txq_ctrl->obj->sq;
- rxq_ctrl = mlx5_rxq_get(dev,
- txq_ctrl->hairpin_conf.peers[0].queue);
- if (!rxq_ctrl) {
+ rxq = mlx5_rxq_get(dev, txq_ctrl->hairpin_conf.peers[0].queue);
+ if (rxq == NULL) {
mlx5_txq_release(dev, i);
rte_errno = EINVAL;
DRV_LOG(ERR, "port %u no rxq object found: %d",
txq_ctrl->hairpin_conf.peers[0].queue);
return -rte_errno;
}
+ rxq_ctrl = rxq->ctrl;
if (rxq_ctrl->type != MLX5_RXQ_TYPE_HAIRPIN ||
- rxq_ctrl->hairpin_conf.peers[0].queue != i) {
+ rxq->hairpin_conf.peers[0].queue != i) {
rte_errno = ENOMEM;
DRV_LOG(ERR, "port %u Tx queue %d can't be binded to "
"Rx queue %d", dev->data->port_id,
if (ret)
goto error;
/* Qs with auto-bind will be destroyed directly. */
- rxq_ctrl->hairpin_status = 1;
+ rxq->hairpin_status = 1;
txq_ctrl->hairpin_status = 1;
mlx5_txq_release(dev, i);
- mlx5_rxq_release(dev, txq_ctrl->hairpin_conf.peers[0].queue);
}
return 0;
error:
mlx5_txq_release(dev, i);
- mlx5_rxq_release(dev, txq_ctrl->hairpin_conf.peers[0].queue);
return -rte_errno;
}
peer_info->manual_bind = txq_ctrl->hairpin_conf.manual_bind;
mlx5_txq_release(dev, peer_queue);
} else { /* Peer port used as ingress. */
+ struct mlx5_rxq_priv *rxq = mlx5_rxq_get(dev, peer_queue);
struct mlx5_rxq_ctrl *rxq_ctrl;
- rxq_ctrl = mlx5_rxq_get(dev, peer_queue);
- if (rxq_ctrl == NULL) {
+ if (rxq == NULL) {
rte_errno = EINVAL;
DRV_LOG(ERR, "Failed to get port %u Rx queue %d",
dev->data->port_id, peer_queue);
return -rte_errno;
}
+ rxq_ctrl = rxq->ctrl;
if (rxq_ctrl->type != MLX5_RXQ_TYPE_HAIRPIN) {
rte_errno = EINVAL;
DRV_LOG(ERR, "port %u queue %d is not a hairpin Rxq",
dev->data->port_id, peer_queue);
- mlx5_rxq_release(dev, peer_queue);
return -rte_errno;
}
if (rxq_ctrl->obj == NULL || rxq_ctrl->obj->rq == NULL) {
rte_errno = ENOMEM;
DRV_LOG(ERR, "port %u no Rxq object found: %d",
dev->data->port_id, peer_queue);
- mlx5_rxq_release(dev, peer_queue);
return -rte_errno;
}
peer_info->qp_id = rxq_ctrl->obj->rq->id;
peer_info->vhca_id = priv->config.hca_attr.vhca_id;
- peer_info->peer_q = rxq_ctrl->hairpin_conf.peers[0].queue;
- peer_info->tx_explicit = rxq_ctrl->hairpin_conf.tx_explicit;
- peer_info->manual_bind = rxq_ctrl->hairpin_conf.manual_bind;
- mlx5_rxq_release(dev, peer_queue);
+ peer_info->peer_q = rxq->hairpin_conf.peers[0].queue;
+ peer_info->tx_explicit = rxq->hairpin_conf.tx_explicit;
+ peer_info->manual_bind = rxq->hairpin_conf.manual_bind;
}
return 0;
}
txq_ctrl->hairpin_status = 1;
mlx5_txq_release(dev, cur_queue);
} else {
+ struct mlx5_rxq_priv *rxq = mlx5_rxq_get(dev, cur_queue);
struct mlx5_rxq_ctrl *rxq_ctrl;
struct mlx5_devx_modify_rq_attr rq_attr = { 0 };
- rxq_ctrl = mlx5_rxq_get(dev, cur_queue);
- if (rxq_ctrl == NULL) {
+ if (rxq == NULL) {
rte_errno = EINVAL;
DRV_LOG(ERR, "Failed to get port %u Rx queue %d",
dev->data->port_id, cur_queue);
return -rte_errno;
}
+ rxq_ctrl = rxq->ctrl;
if (rxq_ctrl->type != MLX5_RXQ_TYPE_HAIRPIN) {
rte_errno = EINVAL;
DRV_LOG(ERR, "port %u queue %d not a hairpin Rxq",
dev->data->port_id, cur_queue);
- mlx5_rxq_release(dev, cur_queue);
return -rte_errno;
}
if (rxq_ctrl->obj == NULL || rxq_ctrl->obj->rq == NULL) {
rte_errno = ENOMEM;
DRV_LOG(ERR, "port %u no Rxq object found: %d",
dev->data->port_id, cur_queue);
- mlx5_rxq_release(dev, cur_queue);
return -rte_errno;
}
- if (rxq_ctrl->hairpin_status != 0) {
+ if (rxq->hairpin_status != 0) {
DRV_LOG(DEBUG, "port %u Rx queue %d is already bound",
dev->data->port_id, cur_queue);
- mlx5_rxq_release(dev, cur_queue);
return 0;
}
if (peer_info->tx_explicit !=
- rxq_ctrl->hairpin_conf.tx_explicit) {
+ rxq->hairpin_conf.tx_explicit) {
rte_errno = EINVAL;
DRV_LOG(ERR, "port %u Rx queue %d and peer Tx rule mode"
" mismatch", dev->data->port_id, cur_queue);
- mlx5_rxq_release(dev, cur_queue);
return -rte_errno;
}
if (peer_info->manual_bind !=
- rxq_ctrl->hairpin_conf.manual_bind) {
+ rxq->hairpin_conf.manual_bind) {
rte_errno = EINVAL;
DRV_LOG(ERR, "port %u Rx queue %d and peer binding mode"
" mismatch", dev->data->port_id, cur_queue);
- mlx5_rxq_release(dev, cur_queue);
return -rte_errno;
}
rq_attr.state = MLX5_SQC_STATE_RDY;
rq_attr.hairpin_peer_vhca = peer_info->vhca_id;
ret = mlx5_devx_cmd_modify_rq(rxq_ctrl->obj->rq, &rq_attr);
if (ret == 0)
- rxq_ctrl->hairpin_status = 1;
- mlx5_rxq_release(dev, cur_queue);
+ rxq->hairpin_status = 1;
}
return ret;
}
txq_ctrl->hairpin_status = 0;
mlx5_txq_release(dev, cur_queue);
} else {
+ struct mlx5_rxq_priv *rxq = mlx5_rxq_get(dev, cur_queue);
struct mlx5_rxq_ctrl *rxq_ctrl;
struct mlx5_devx_modify_rq_attr rq_attr = { 0 };
- rxq_ctrl = mlx5_rxq_get(dev, cur_queue);
- if (rxq_ctrl == NULL) {
+ if (rxq == NULL) {
rte_errno = EINVAL;
DRV_LOG(ERR, "Failed to get port %u Rx queue %d",
dev->data->port_id, cur_queue);
return -rte_errno;
}
+ rxq_ctrl = rxq->ctrl;
if (rxq_ctrl->type != MLX5_RXQ_TYPE_HAIRPIN) {
rte_errno = EINVAL;
DRV_LOG(ERR, "port %u queue %d not a hairpin Rxq",
dev->data->port_id, cur_queue);
- mlx5_rxq_release(dev, cur_queue);
return -rte_errno;
}
- if (rxq_ctrl->hairpin_status == 0) {
+ if (rxq->hairpin_status == 0) {
DRV_LOG(DEBUG, "port %u Rx queue %d is already unbound",
dev->data->port_id, cur_queue);
- mlx5_rxq_release(dev, cur_queue);
return 0;
}
if (rxq_ctrl->obj == NULL || rxq_ctrl->obj->rq == NULL) {
rte_errno = ENOMEM;
DRV_LOG(ERR, "port %u no Rxq object found: %d",
dev->data->port_id, cur_queue);
- mlx5_rxq_release(dev, cur_queue);
return -rte_errno;
}
rq_attr.state = MLX5_SQC_STATE_RST;
rq_attr.rq_state = MLX5_SQC_STATE_RST;
ret = mlx5_devx_cmd_modify_rq(rxq_ctrl->obj->rq, &rq_attr);
if (ret == 0)
- rxq_ctrl->hairpin_status = 0;
- mlx5_rxq_release(dev, cur_queue);
+ rxq->hairpin_status = 0;
}
return ret;
}
uint32_t explicit;
uint16_t rx_queue;
- if (mlx5_eth_find_next(rx_port, priv->pci_dev) != rx_port) {
+ if (mlx5_eth_find_next(rx_port, dev->device) != rx_port) {
rte_errno = ENODEV;
DRV_LOG(ERR, "Rx port %u does not belong to mlx5", rx_port);
return -rte_errno;
/*
* Unbind the hairpin port pair, HW configuration of both devices will be clear
- * and status will be reset for all the queues used between the them.
+ * and status will be reset for all the queues used between them.
* This function only supports to unbind the Tx from one Rx.
*
* @param dev
int ret;
uint16_t cur_port = priv->dev_data->port_id;
- if (mlx5_eth_find_next(rx_port, priv->pci_dev) != rx_port) {
+ if (mlx5_eth_find_next(rx_port, dev->device) != rx_port) {
rte_errno = ENODEV;
DRV_LOG(ERR, "Rx port %u does not belong to mlx5", rx_port);
return -rte_errno;
{
int ret = 0;
uint16_t p, pp;
- struct mlx5_priv *priv = dev->data->dev_private;
/*
* If the Rx port has no hairpin configuration with the current port,
* information updating.
*/
if (rx_port == RTE_MAX_ETHPORTS) {
- MLX5_ETH_FOREACH_DEV(p, priv->pci_dev) {
+ MLX5_ETH_FOREACH_DEV(p, dev->device) {
ret = mlx5_hairpin_bind_single_port(dev, p);
if (ret != 0)
goto unbind;
return mlx5_hairpin_bind_single_port(dev, rx_port);
}
unbind:
- MLX5_ETH_FOREACH_DEV(pp, priv->pci_dev)
+ MLX5_ETH_FOREACH_DEV(pp, dev->device)
if (pp < p)
mlx5_hairpin_unbind_single_port(dev, pp);
return ret;
{
int ret = 0;
uint16_t p;
- struct mlx5_priv *priv = dev->data->dev_private;
if (rx_port == RTE_MAX_ETHPORTS)
- MLX5_ETH_FOREACH_DEV(p, priv->pci_dev) {
+ MLX5_ETH_FOREACH_DEV(p, dev->device) {
ret = mlx5_hairpin_unbind_single_port(dev, p);
if (ret != 0)
return ret;
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_txq_ctrl *txq_ctrl;
- struct mlx5_rxq_ctrl *rxq_ctrl;
uint32_t i;
uint16_t pp;
uint32_t bits[(RTE_MAX_ETHPORTS + 31) / 32] = {0};
}
} else {
for (i = 0; i < priv->rxqs_n; i++) {
- rxq_ctrl = mlx5_rxq_get(dev, i);
- if (!rxq_ctrl)
+ struct mlx5_rxq_priv *rxq = mlx5_rxq_get(dev, i);
+ struct mlx5_rxq_ctrl *rxq_ctrl;
+
+ if (rxq == NULL)
continue;
- if (rxq_ctrl->type != MLX5_RXQ_TYPE_HAIRPIN) {
- mlx5_rxq_release(dev, i);
+ rxq_ctrl = rxq->ctrl;
+ if (rxq_ctrl->type != MLX5_RXQ_TYPE_HAIRPIN)
continue;
- }
- pp = rxq_ctrl->hairpin_conf.peers[0].port;
+ pp = rxq->hairpin_conf.peers[0].port;
if (pp >= RTE_MAX_ETHPORTS) {
rte_errno = ERANGE;
- mlx5_rxq_release(dev, i);
DRV_LOG(ERR, "port %hu queue %u peer port "
"out of range %hu",
priv->dev_data->port_id, i, pp);
return -rte_errno;
}
bits[pp / 32] |= 1 << (pp % 32);
- mlx5_rxq_release(dev, i);
}
}
for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
dev->data->port_id, strerror(rte_errno));
goto error;
}
- if ((priv->config.devx && priv->config.dv_flow_en &&
+ if ((priv->sh->devx && priv->config.dv_flow_en &&
priv->config.dest_tir) && priv->obj_ops.lb_dummy_queue_create) {
ret = priv->obj_ops.lb_dummy_queue_create(dev);
if (ret)
dev->data->port_id, strerror(rte_errno));
goto error;
}
+ if (priv->config.std_delay_drop || priv->config.hp_delay_drop) {
+ if (!priv->config.vf && !priv->config.sf &&
+ !priv->representor) {
+ ret = mlx5_get_flag_dropless_rq(dev);
+ if (ret < 0)
+ DRV_LOG(WARNING,
+ "port %u cannot query dropless flag",
+ dev->data->port_id);
+ else if (!ret)
+ DRV_LOG(WARNING,
+ "port %u dropless_rq OFF, no rearming",
+ dev->data->port_id);
+ } else {
+ DRV_LOG(DEBUG,
+ "port %u doesn't support dropless_rq flag",
+ dev->data->port_id);
+ }
+ }
ret = mlx5_rxq_start(dev);
if (ret) {
DRV_LOG(ERR, "port %u Rx queue allocation failed: %s",
goto error;
}
mlx5_os_stats_init(dev);
+ /*
+ * Attach indirection table objects detached on port stop.
+ * They may be needed to create RSS in non-isolated mode.
+ */
+ ret = mlx5_action_handle_attach(dev);
+ if (ret) {
+ DRV_LOG(ERR,
+ "port %u failed to attach indirect actions: %s",
+ dev->data->port_id, rte_strerror(rte_errno));
+ goto error;
+ }
ret = mlx5_traffic_enable(dev);
if (ret) {
DRV_LOG(ERR, "port %u failed to set defaults flows",
dev->data->port_id, strerror(rte_errno));
goto error;
}
+ if (mlx5_dev_ctx_shared_mempool_subscribe(dev) != 0) {
+ DRV_LOG(ERR, "port %u failed to subscribe for mempool life cycle: %s",
+ dev->data->port_id, rte_strerror(rte_errno));
+ goto error;
+ }
rte_wmb();
dev->tx_pkt_burst = mlx5_select_tx_function(dev);
dev->rx_pkt_burst = mlx5_select_rx_function(dev);
/* Enable datapath on secondary process. */
mlx5_mp_os_req_start_rxtx(dev);
- if (priv->sh->intr_handle.fd >= 0) {
+ if (rte_intr_fd_get(priv->sh->intr_handle) >= 0) {
priv->sh->port[priv->dev_port - 1].ih_port_id =
(uint32_t)dev->data->port_id;
} else {
dev->data->dev_conf.intr_conf.lsc = 0;
dev->data->dev_conf.intr_conf.rmv = 0;
}
- if (priv->sh->intr_handle_devx.fd >= 0)
+ if (rte_intr_fd_get(priv->sh->intr_handle_devx) >= 0)
priv->sh->port[priv->dev_port - 1].devx_ih_port_id =
(uint32_t)dev->data->port_id;
return 0;
dev->data->dev_started = 0;
/* Prevent crashes when queues are still in use. */
- dev->rx_pkt_burst = removed_rx_burst;
- dev->tx_pkt_burst = removed_tx_burst;
+ dev->rx_pkt_burst = rte_eth_pkt_burst_dummy;
+ dev->tx_pkt_burst = rte_eth_pkt_burst_dummy;
rte_wmb();
/* Disable datapath on secondary process. */
mlx5_mp_os_req_stop_rxtx(dev);
/* Control flows for default traffic can be removed firstly. */
mlx5_traffic_disable(dev);
/* All RX queue flags will be cleared in the flush interface. */
- mlx5_flow_list_flush(dev, &priv->flows, true);
+ mlx5_flow_list_flush(dev, MLX5_FLOW_TYPE_GEN, true);
mlx5_flow_meter_rxq_flush(dev);
+ mlx5_action_handle_detach(dev);
mlx5_rx_intr_vec_disable(dev);
priv->sh->port[priv->dev_port - 1].ih_port_id = RTE_MAX_ETHPORTS;
priv->sh->port[priv->dev_port - 1].devx_ih_port_id = RTE_MAX_ETHPORTS;
goto error;
}
}
+ if ((priv->representor || priv->master) &&
+ priv->config.dv_esw_en) {
+ if (mlx5_flow_create_devx_sq_miss_flow(dev, i) == 0) {
+ DRV_LOG(ERR,
+ "Port %u Tx queue %u SQ create representor devx default miss rule failed.",
+ dev->data->port_id, i);
+ goto error;
+ }
+ }
mlx5_txq_release(dev, i);
}
- if (priv->config.dv_esw_en && !priv->config.vf) {
+ if ((priv->master || priv->representor) && priv->config.dv_esw_en) {
if (mlx5_flow_create_esw_table_zero_flow(dev))
priv->fdb_def_rule = 1;
else
return 0;
error:
ret = rte_errno; /* Save rte_errno before cleanup. */
- mlx5_flow_list_flush(dev, &priv->ctrl_flows, false);
+ mlx5_flow_list_flush(dev, MLX5_FLOW_TYPE_CTL, false);
rte_errno = ret; /* Restore rte_errno. */
return -rte_errno;
}
void
mlx5_traffic_disable(struct rte_eth_dev *dev)
{
- struct mlx5_priv *priv = dev->data->dev_private;
-
- mlx5_flow_list_flush(dev, &priv->ctrl_flows, false);
+ mlx5_flow_list_flush(dev, MLX5_FLOW_TYPE_CTL, false);
}
/**