#include <rte_common.h>
#include <rte_spinlock.h>
+#include <mlx5_common.h>
#include <mlx5_common_mr.h>
#include "mlx5.h"
#include "mlx5_autoconf.h"
-#include "mlx5_mr.h"
+
+/* TX burst subroutines return codes. */
+enum mlx5_txcmp_code {
+ MLX5_TXCMP_CODE_EXIT = 0,
+ MLX5_TXCMP_CODE_ERROR,
+ MLX5_TXCMP_CODE_SINGLE,
+ MLX5_TXCMP_CODE_MULTI,
+ MLX5_TXCMP_CODE_TSO,
+ MLX5_TXCMP_CODE_EMPW,
+};
+
+/*
+ * These defines are used to configure Tx burst routine option set supported
+ * at compile time. The not specified options are optimized out due to if
+ * conditions can be explicitly calculated at compile time.
+ * The offloads with bigger runtime check (require more CPU cycles toskip)
+ * overhead should have the bigger index - this is needed to select the better
+ * matching routine function if no exact match and some offloads are not
+ * actually requested.
+ */
+#define MLX5_TXOFF_CONFIG_MULTI (1u << 0) /* Multi-segment packets.*/
+#define MLX5_TXOFF_CONFIG_TSO (1u << 1) /* TCP send offload supported.*/
+#define MLX5_TXOFF_CONFIG_SWP (1u << 2) /* Tunnels/SW Parser offloads.*/
+#define MLX5_TXOFF_CONFIG_CSUM (1u << 3) /* Check Sums offloaded. */
+#define MLX5_TXOFF_CONFIG_INLINE (1u << 4) /* Data inlining supported. */
+#define MLX5_TXOFF_CONFIG_VLAN (1u << 5) /* VLAN insertion supported.*/
+#define MLX5_TXOFF_CONFIG_METADATA (1u << 6) /* Flow metadata. */
+#define MLX5_TXOFF_CONFIG_EMPW (1u << 8) /* Enhanced MPW supported.*/
+#define MLX5_TXOFF_CONFIG_MPW (1u << 9) /* Legacy MPW supported.*/
+#define MLX5_TXOFF_CONFIG_TXPP (1u << 10) /* Scheduling on timestamp.*/
+
+/* The most common offloads groups. */
+#define MLX5_TXOFF_CONFIG_NONE 0
+#define MLX5_TXOFF_CONFIG_FULL (MLX5_TXOFF_CONFIG_MULTI | \
+ MLX5_TXOFF_CONFIG_TSO | \
+ MLX5_TXOFF_CONFIG_SWP | \
+ MLX5_TXOFF_CONFIG_CSUM | \
+ MLX5_TXOFF_CONFIG_INLINE | \
+ MLX5_TXOFF_CONFIG_VLAN | \
+ MLX5_TXOFF_CONFIG_METADATA)
+
+#define MLX5_TXOFF_CONFIG(mask) (olx & MLX5_TXOFF_CONFIG_##mask)
+
+#define MLX5_TXOFF_PRE_DECL(func) \
+uint16_t mlx5_tx_burst_##func(void *txq, \
+ struct rte_mbuf **pkts, \
+ uint16_t pkts_n)
+
+#define MLX5_TXOFF_DECL(func, olx) \
+uint16_t mlx5_tx_burst_##func(void *txq, \
+ struct rte_mbuf **pkts, \
+ uint16_t pkts_n) \
+{ \
+ return mlx5_tx_burst_tmpl((struct mlx5_txq_data *)txq, \
+ pkts, pkts_n, (olx)); \
+}
/* Mbuf dynamic flag offset for inline. */
extern uint64_t rte_net_mlx5_dynf_inline_mask;
+#define RTE_MBUF_F_TX_DYNF_NOINLINE rte_net_mlx5_dynf_inline_mask
+
+extern uint32_t mlx5_ptype_table[] __rte_cache_aligned;
+extern uint8_t mlx5_cksum_table[1 << 10] __rte_cache_aligned;
+extern uint8_t mlx5_swp_types_table[1 << 10] __rte_cache_aligned;
struct mlx5_txq_stats {
#ifdef MLX5_PMD_SOFT_COUNTERS
uint16_t vlan_en:1; /* VLAN insertion in WQE is supported. */
uint16_t db_nc:1; /* Doorbell mapped to non-cached region. */
uint16_t db_heu:1; /* Doorbell heuristic write barrier. */
+ uint16_t rt_timestamp:1; /* Realtime timestamp format. */
+ uint16_t wait_on_time:1; /* WQE with timestamp is supported. */
uint16_t fast_free:1; /* mbuf fast free on Tx is enabled. */
uint16_t inlen_send; /* Ordinary send data inline size. */
uint16_t inlen_empw; /* eMPW max packet size to inline. */
volatile uint32_t *cq_db; /* Completion queue doorbell. */
uint16_t port_id; /* Port ID of device. */
uint16_t idx; /* Queue index. */
+ uint64_t rt_timemask; /* Scheduling timestamp mask. */
uint64_t ts_mask; /* Timestamp flag dynamic mask. */
int32_t ts_offset; /* Timestamp field dynamic offset. */
struct mlx5_dev_ctx_shared *sh; /* Shared context. */
struct mlx5_txq_stats stats; /* TX queue counters. */
-#ifndef RTE_ARCH_64
- rte_spinlock_t *uar_lock;
- /* UAR access lock required for 32bit implementations */
-#endif
+ struct mlx5_txq_stats stats_reset; /* stats on last reset. */
+ struct mlx5_uar_data uar_data;
struct rte_mbuf *elts[0];
/* Storage for queued packets, must be the last field. */
} __rte_cache_aligned;
-enum mlx5_txq_type {
- MLX5_TXQ_TYPE_STANDARD, /* Standard Tx queue. */
- MLX5_TXQ_TYPE_HAIRPIN, /* Hairpin Tx queue. */
-};
-
/* TX queue control descriptor. */
struct mlx5_txq_ctrl {
LIST_ENTRY(mlx5_txq_ctrl) next; /* Pointer to the next element. */
uint32_t refcnt; /* Reference counter. */
unsigned int socket; /* CPU socket ID for allocations. */
- enum mlx5_txq_type type; /* The txq ctrl type. */
+ bool is_hairpin; /* Whether TxQ type is Hairpin. */
unsigned int max_inline_data; /* Max inline data. */
unsigned int max_tso_header; /* Max TSO header size. */
struct mlx5_txq_obj *obj; /* Verbs/DevX queue object. */
struct mlx5_priv *priv; /* Back pointer to private data. */
off_t uar_mmap_offset; /* UAR mmap offset for non-primary process. */
- void *bf_reg; /* BlueFlame register from Verbs. */
uint16_t dump_file_n; /* Number of dump files. */
struct rte_eth_hairpin_conf hairpin_conf; /* Hairpin configuration. */
uint32_t hairpin_status; /* Hairpin binding status. */
int mlx5_tx_hairpin_queue_setup
(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
const struct rte_eth_hairpin_conf *hairpin_conf);
-void mlx5_tx_queue_release(void *dpdk_txq);
-void txq_uar_init(struct mlx5_txq_ctrl *txq_ctrl);
+void mlx5_tx_queue_release(struct rte_eth_dev *dev, uint16_t qid);
int mlx5_tx_uar_init_secondary(struct rte_eth_dev *dev, int fd);
void mlx5_tx_uar_uninit_secondary(struct rte_eth_dev *dev);
int mlx5_txq_obj_verify(struct rte_eth_dev *dev);
/* mlx5_tx.c */
-uint16_t removed_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts,
- uint16_t pkts_n);
+void mlx5_tx_handle_completion(struct mlx5_txq_data *__rte_restrict txq,
+ unsigned int olx __rte_unused);
int mlx5_tx_descriptor_status(void *tx_queue, uint16_t offset);
void mlx5_txq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
struct rte_eth_txq_info *qinfo);
int mlx5_tx_burst_mode_get(struct rte_eth_dev *dev, uint16_t tx_queue_id,
struct rte_eth_burst_mode *mode);
-/* mlx5_mr.c */
+/* mlx5_tx_empw.c */
-uint32_t mlx5_tx_mb2mr_bh(struct mlx5_txq_data *txq, struct rte_mbuf *mb);
-uint32_t mlx5_tx_update_ext_mp(struct mlx5_txq_data *txq, uintptr_t addr,
- struct rte_mempool *mp);
+MLX5_TXOFF_PRE_DECL(full_empw);
+MLX5_TXOFF_PRE_DECL(none_empw);
+MLX5_TXOFF_PRE_DECL(md_empw);
+MLX5_TXOFF_PRE_DECL(mt_empw);
+MLX5_TXOFF_PRE_DECL(mtsc_empw);
+MLX5_TXOFF_PRE_DECL(mti_empw);
+MLX5_TXOFF_PRE_DECL(mtv_empw);
+MLX5_TXOFF_PRE_DECL(mtiv_empw);
+MLX5_TXOFF_PRE_DECL(sc_empw);
+MLX5_TXOFF_PRE_DECL(sci_empw);
+MLX5_TXOFF_PRE_DECL(scv_empw);
+MLX5_TXOFF_PRE_DECL(sciv_empw);
+MLX5_TXOFF_PRE_DECL(i_empw);
+MLX5_TXOFF_PRE_DECL(v_empw);
+MLX5_TXOFF_PRE_DECL(iv_empw);
-static __rte_always_inline uint64_t *
-mlx5_tx_bfreg(struct mlx5_txq_data *txq)
-{
- return MLX5_PROC_PRIV(txq->port_id)->uar_table[txq->idx];
-}
+/* mlx5_tx_nompw.c */
-/**
- * Provide safe 64bit store operation to mlx5 UAR region for both 32bit and
- * 64bit architectures.
- *
- * @param val
- * value to write in CPU endian format.
- * @param addr
- * Address to write to.
- * @param lock
- * Address of the lock to use for that UAR access.
- */
-static __rte_always_inline void
-__mlx5_uar_write64_relaxed(uint64_t val, void *addr,
- rte_spinlock_t *lock __rte_unused)
-{
-#ifdef RTE_ARCH_64
- *(uint64_t *)addr = val;
-#else /* !RTE_ARCH_64 */
- rte_spinlock_lock(lock);
- *(uint32_t *)addr = val;
- rte_io_wmb();
- *((uint32_t *)addr + 1) = val >> 32;
- rte_spinlock_unlock(lock);
-#endif
-}
+MLX5_TXOFF_PRE_DECL(full);
+MLX5_TXOFF_PRE_DECL(none);
+MLX5_TXOFF_PRE_DECL(md);
+MLX5_TXOFF_PRE_DECL(mt);
+MLX5_TXOFF_PRE_DECL(mtsc);
+MLX5_TXOFF_PRE_DECL(mti);
+MLX5_TXOFF_PRE_DECL(mtv);
+MLX5_TXOFF_PRE_DECL(mtiv);
+MLX5_TXOFF_PRE_DECL(sc);
+MLX5_TXOFF_PRE_DECL(sci);
+MLX5_TXOFF_PRE_DECL(scv);
+MLX5_TXOFF_PRE_DECL(sciv);
+MLX5_TXOFF_PRE_DECL(i);
+MLX5_TXOFF_PRE_DECL(v);
+MLX5_TXOFF_PRE_DECL(iv);
-/**
- * Provide safe 64bit store operation to mlx5 UAR region for both 32bit and
- * 64bit architectures while guaranteeing the order of execution with the
- * code being executed.
- *
- * @param val
- * value to write in CPU endian format.
- * @param addr
- * Address to write to.
- * @param lock
- * Address of the lock to use for that UAR access.
- */
-static __rte_always_inline void
-__mlx5_uar_write64(uint64_t val, void *addr, rte_spinlock_t *lock)
-{
- rte_io_wmb();
- __mlx5_uar_write64_relaxed(val, addr, lock);
-}
+/* mlx5_tx_txpp.c */
-/* Assist macros, used instead of directly calling the functions they wrap. */
-#ifdef RTE_ARCH_64
-#define mlx5_uar_write64_relaxed(val, dst, lock) \
- __mlx5_uar_write64_relaxed(val, dst, NULL)
-#define mlx5_uar_write64(val, dst, lock) __mlx5_uar_write64(val, dst, NULL)
-#else
-#define mlx5_uar_write64_relaxed(val, dst, lock) \
- __mlx5_uar_write64_relaxed(val, dst, lock)
-#define mlx5_uar_write64(val, dst, lock) __mlx5_uar_write64(val, dst, lock)
-#endif
+MLX5_TXOFF_PRE_DECL(full_ts_nompw);
+MLX5_TXOFF_PRE_DECL(full_ts_nompwi);
+MLX5_TXOFF_PRE_DECL(full_ts);
+MLX5_TXOFF_PRE_DECL(full_ts_noi);
+MLX5_TXOFF_PRE_DECL(none_ts);
+MLX5_TXOFF_PRE_DECL(mdi_ts);
+MLX5_TXOFF_PRE_DECL(mti_ts);
+MLX5_TXOFF_PRE_DECL(mtiv_ts);
-/**
- * Query LKey from a packet buffer for Tx. If not found, add the mempool.
- *
- * @param txq
- * Pointer to Tx queue structure.
- * @param addr
- * Address to search.
- *
- * @return
- * Searched LKey on success, UINT32_MAX on no match.
- */
-static __rte_always_inline uint32_t
-mlx5_tx_mb2mr(struct mlx5_txq_data *txq, struct rte_mbuf *mb)
-{
- struct mlx5_mr_ctrl *mr_ctrl = &txq->mr_ctrl;
- uintptr_t addr = (uintptr_t)mb->buf_addr;
- uint32_t lkey;
+/* mlx5_tx_mpw.c */
- /* Check generation bit to see if there's any change on existing MRs. */
- if (unlikely(*mr_ctrl->dev_gen_ptr != mr_ctrl->cur_gen))
- mlx5_mr_flush_local_cache(mr_ctrl);
- /* Linear search on MR cache array. */
- lkey = mlx5_mr_lookup_lkey(mr_ctrl->cache, &mr_ctrl->mru,
- MLX5_MR_CACHE_N, addr);
- if (likely(lkey != UINT32_MAX))
- return lkey;
- /* Take slower bottom-half on miss. */
- return mlx5_tx_mb2mr_bh(txq, mb);
-}
+MLX5_TXOFF_PRE_DECL(none_mpw);
+MLX5_TXOFF_PRE_DECL(mci_mpw);
+MLX5_TXOFF_PRE_DECL(mc_mpw);
+MLX5_TXOFF_PRE_DECL(i_mpw);
-/**
- * Ring TX queue doorbell and flush the update if requested.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param wqe
- * Pointer to the last WQE posted in the NIC.
- * @param cond
- * Request for write memory barrier after BlueFlame update.
- */
-static __rte_always_inline void
-mlx5_tx_dbrec_cond_wmb(struct mlx5_txq_data *txq, volatile struct mlx5_wqe *wqe,
- int cond)
+static __rte_always_inline struct mlx5_uar_data *
+mlx5_tx_bfreg(struct mlx5_txq_data *txq)
{
- uint64_t *dst = mlx5_tx_bfreg(txq);
- volatile uint64_t *src = ((volatile uint64_t *)wqe);
-
- rte_io_wmb();
- *txq->qp_db = rte_cpu_to_be_32(txq->wqe_ci);
- /* Ensure ordering between DB record and BF copy. */
- rte_wmb();
- mlx5_uar_write64_relaxed(*src, dst, txq->uar_lock);
- if (cond)
- rte_wmb();
+ return &MLX5_PROC_PRIV(txq->port_id)->uar_table[txq->idx];
}
/**
static __rte_always_inline void
mlx5_tx_dbrec(struct mlx5_txq_data *txq, volatile struct mlx5_wqe *wqe)
{
- mlx5_tx_dbrec_cond_wmb(txq, wqe, 1);
+ mlx5_doorbell_ring(mlx5_tx_bfreg(txq), *(volatile uint64_t *)wqe,
+ txq->wqe_ci, txq->qp_db, 1);
}
/**
return ci;
}
+/**
+ * Set Software Parser flags and offsets in Ethernet Segment of WQE.
+ * Flags must be preliminary initialized to zero.
+ *
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param swp_flags
+ * Pointer to store Software Parser flags.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * Software Parser offsets packed in dword.
+ * Software Parser flags are set by pointer.
+ */
+static __rte_always_inline uint32_t
+txq_mbuf_to_swp(struct mlx5_txq_local *__rte_restrict loc,
+ uint8_t *swp_flags,
+ unsigned int olx)
+{
+ uint64_t ol, tunnel;
+ unsigned int idx, off;
+ uint32_t set;
+
+ if (!MLX5_TXOFF_CONFIG(SWP))
+ return 0;
+ ol = loc->mbuf->ol_flags;
+ tunnel = ol & RTE_MBUF_F_TX_TUNNEL_MASK;
+ /*
+ * Check whether Software Parser is required.
+ * Only customized tunnels may ask for.
+ */
+ if (likely(tunnel != RTE_MBUF_F_TX_TUNNEL_UDP && tunnel != RTE_MBUF_F_TX_TUNNEL_IP))
+ return 0;
+ /*
+ * The index should have:
+ * bit[0:1] = RTE_MBUF_F_TX_L4_MASK
+ * bit[4] = RTE_MBUF_F_TX_IPV6
+ * bit[8] = RTE_MBUF_F_TX_OUTER_IPV6
+ * bit[9] = RTE_MBUF_F_TX_OUTER_UDP
+ */
+ idx = (ol & (RTE_MBUF_F_TX_L4_MASK | RTE_MBUF_F_TX_IPV6 | RTE_MBUF_F_TX_OUTER_IPV6)) >> 52;
+ idx |= (tunnel == RTE_MBUF_F_TX_TUNNEL_UDP) ? (1 << 9) : 0;
+ *swp_flags = mlx5_swp_types_table[idx];
+ /*
+ * Set offsets for SW parser. Since ConnectX-5, SW parser just
+ * complements HW parser. SW parser starts to engage only if HW parser
+ * can't reach a header. For the older devices, HW parser will not kick
+ * in if any of SWP offsets is set. Therefore, all of the L3 offsets
+ * should be set regardless of HW offload.
+ */
+ off = loc->mbuf->outer_l2_len;
+ if (MLX5_TXOFF_CONFIG(VLAN) && ol & RTE_MBUF_F_TX_VLAN)
+ off += sizeof(struct rte_vlan_hdr);
+ set = (off >> 1) << 8; /* Outer L3 offset. */
+ off += loc->mbuf->outer_l3_len;
+ if (tunnel == RTE_MBUF_F_TX_TUNNEL_UDP)
+ set |= off >> 1; /* Outer L4 offset. */
+ if (ol & (RTE_MBUF_F_TX_IPV4 | RTE_MBUF_F_TX_IPV6)) { /* Inner IP. */
+ const uint64_t csum = ol & RTE_MBUF_F_TX_L4_MASK;
+ off += loc->mbuf->l2_len;
+ set |= (off >> 1) << 24; /* Inner L3 offset. */
+ if (csum == RTE_MBUF_F_TX_TCP_CKSUM ||
+ csum == RTE_MBUF_F_TX_UDP_CKSUM ||
+ (MLX5_TXOFF_CONFIG(TSO) && ol & RTE_MBUF_F_TX_TCP_SEG)) {
+ off += loc->mbuf->l3_len;
+ set |= (off >> 1) << 16; /* Inner L4 offset. */
+ }
+ }
+ set = rte_cpu_to_le_32(set);
+ return set;
+}
+
+/**
+ * Convert the Checksum offloads to Verbs.
+ *
+ * @param buf
+ * Pointer to the mbuf.
+ *
+ * @return
+ * Converted checksum flags.
+ */
+static __rte_always_inline uint8_t
+txq_ol_cksum_to_cs(struct rte_mbuf *buf)
+{
+ uint32_t idx;
+ uint8_t is_tunnel = !!(buf->ol_flags & RTE_MBUF_F_TX_TUNNEL_MASK);
+ const uint64_t ol_flags_mask = RTE_MBUF_F_TX_TCP_SEG | RTE_MBUF_F_TX_L4_MASK |
+ RTE_MBUF_F_TX_IP_CKSUM | RTE_MBUF_F_TX_OUTER_IP_CKSUM;
+
+ /*
+ * The index should have:
+ * bit[0] = RTE_MBUF_F_TX_TCP_SEG
+ * bit[2:3] = RTE_MBUF_F_TX_UDP_CKSUM, RTE_MBUF_F_TX_TCP_CKSUM
+ * bit[4] = RTE_MBUF_F_TX_IP_CKSUM
+ * bit[8] = RTE_MBUF_F_TX_OUTER_IP_CKSUM
+ * bit[9] = tunnel
+ */
+ idx = ((buf->ol_flags & ol_flags_mask) >> 50) | (!!is_tunnel << 9);
+ return mlx5_cksum_table[idx];
+}
+
+/**
+ * Free the mbufs from the linear array of pointers.
+ *
+ * @param txq
+ * Pointer to Tx queue structure.
+ * @param pkts
+ * Pointer to array of packets to be free.
+ * @param pkts_n
+ * Number of packets to be freed.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_free_mbuf(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ unsigned int olx __rte_unused)
+{
+ struct rte_mempool *pool = NULL;
+ struct rte_mbuf **p_free = NULL;
+ struct rte_mbuf *mbuf;
+ unsigned int n_free = 0;
+
+ /*
+ * The implemented algorithm eliminates
+ * copying pointers to temporary array
+ * for rte_mempool_put_bulk() calls.
+ */
+ MLX5_ASSERT(pkts);
+ MLX5_ASSERT(pkts_n);
+ /*
+ * Free mbufs directly to the pool in bulk
+ * if fast free offload is engaged
+ */
+ if (!MLX5_TXOFF_CONFIG(MULTI) && txq->fast_free) {
+ mbuf = *pkts;
+ pool = mbuf->pool;
+ rte_mempool_put_bulk(pool, (void *)pkts, pkts_n);
+ return;
+ }
+ for (;;) {
+ for (;;) {
+ /*
+ * Decrement mbuf reference counter, detach
+ * indirect and external buffers if needed.
+ */
+ mbuf = rte_pktmbuf_prefree_seg(*pkts);
+ if (likely(mbuf != NULL)) {
+ MLX5_ASSERT(mbuf == *pkts);
+ if (likely(n_free != 0)) {
+ if (unlikely(pool != mbuf->pool))
+ /* From different pool. */
+ break;
+ } else {
+ /* Start new scan array. */
+ pool = mbuf->pool;
+ p_free = pkts;
+ }
+ ++n_free;
+ ++pkts;
+ --pkts_n;
+ if (unlikely(pkts_n == 0)) {
+ mbuf = NULL;
+ break;
+ }
+ } else {
+ /*
+ * This happens if mbuf is still referenced.
+ * We can't put it back to the pool, skip.
+ */
+ ++pkts;
+ --pkts_n;
+ if (unlikely(n_free != 0))
+ /* There is some array to free.*/
+ break;
+ if (unlikely(pkts_n == 0))
+ /* Last mbuf, nothing to free. */
+ return;
+ }
+ }
+ for (;;) {
+ /*
+ * This loop is implemented to avoid multiple
+ * inlining of rte_mempool_put_bulk().
+ */
+ MLX5_ASSERT(pool);
+ MLX5_ASSERT(p_free);
+ MLX5_ASSERT(n_free);
+ /*
+ * Free the array of pre-freed mbufs
+ * belonging to the same memory pool.
+ */
+ rte_mempool_put_bulk(pool, (void *)p_free, n_free);
+ if (unlikely(mbuf != NULL)) {
+ /* There is the request to start new scan. */
+ pool = mbuf->pool;
+ p_free = pkts++;
+ n_free = 1;
+ --pkts_n;
+ if (likely(pkts_n != 0))
+ break;
+ /*
+ * This is the last mbuf to be freed.
+ * Do one more loop iteration to complete.
+ * This is rare case of the last unique mbuf.
+ */
+ mbuf = NULL;
+ continue;
+ }
+ if (likely(pkts_n == 0))
+ return;
+ n_free = 0;
+ break;
+ }
+ }
+}
+
+/**
+ * No inline version to free buffers for optimal call
+ * on the tx_burst completion.
+ */
+static __rte_noinline void
+__mlx5_tx_free_mbuf(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ unsigned int olx __rte_unused)
+{
+ mlx5_tx_free_mbuf(txq, pkts, pkts_n, olx);
+}
+
+/**
+ * Free the mbuf from the elts ring buffer till new tail.
+ *
+ * @param txq
+ * Pointer to Tx queue structure.
+ * @param tail
+ * Index in elts to free up to, becomes new elts tail.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_free_elts(struct mlx5_txq_data *__rte_restrict txq,
+ uint16_t tail,
+ unsigned int olx __rte_unused)
+{
+ uint16_t n_elts = tail - txq->elts_tail;
+
+ MLX5_ASSERT(n_elts);
+ MLX5_ASSERT(n_elts <= txq->elts_s);
+ /*
+ * Implement a loop to support ring buffer wraparound
+ * with single inlining of mlx5_tx_free_mbuf().
+ */
+ do {
+ unsigned int part;
+
+ part = txq->elts_s - (txq->elts_tail & txq->elts_m);
+ part = RTE_MIN(part, n_elts);
+ MLX5_ASSERT(part);
+ MLX5_ASSERT(part <= txq->elts_s);
+ mlx5_tx_free_mbuf(txq,
+ &txq->elts[txq->elts_tail & txq->elts_m],
+ part, olx);
+ txq->elts_tail += part;
+ n_elts -= part;
+ } while (n_elts);
+}
+
+/**
+ * Store the mbuf being sent into elts ring buffer.
+ * On Tx completion these mbufs will be freed.
+ *
+ * @param txq
+ * Pointer to Tx queue structure.
+ * @param pkts
+ * Pointer to array of packets to be stored.
+ * @param pkts_n
+ * Number of packets to be stored.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_copy_elts(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ unsigned int olx __rte_unused)
+{
+ unsigned int part;
+ struct rte_mbuf **elts = (struct rte_mbuf **)txq->elts;
+
+ MLX5_ASSERT(pkts);
+ MLX5_ASSERT(pkts_n);
+ part = txq->elts_s - (txq->elts_head & txq->elts_m);
+ MLX5_ASSERT(part);
+ MLX5_ASSERT(part <= txq->elts_s);
+ /* This code is a good candidate for vectorizing with SIMD. */
+ rte_memcpy((void *)(elts + (txq->elts_head & txq->elts_m)),
+ (void *)pkts,
+ RTE_MIN(part, pkts_n) * sizeof(struct rte_mbuf *));
+ txq->elts_head += pkts_n;
+ if (unlikely(part < pkts_n))
+ /* The copy is wrapping around the elts array. */
+ rte_memcpy((void *)elts, (void *)(pkts + part),
+ (pkts_n - part) * sizeof(struct rte_mbuf *));
+}
+
+/**
+ * Check if the completion request flag should be set in the last WQE.
+ * Both pushed mbufs and WQEs are monitored and the completion request
+ * flag is set if any of thresholds is reached.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_request_completion(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ uint16_t head = txq->elts_head;
+ unsigned int part;
+
+ part = MLX5_TXOFF_CONFIG(INLINE) ?
+ 0 : loc->pkts_sent - loc->pkts_copy;
+ head += part;
+ if ((uint16_t)(head - txq->elts_comp) >= MLX5_TX_COMP_THRESH ||
+ (MLX5_TXOFF_CONFIG(INLINE) &&
+ (uint16_t)(txq->wqe_ci - txq->wqe_comp) >= txq->wqe_thres)) {
+ volatile struct mlx5_wqe *last = loc->wqe_last;
+
+ MLX5_ASSERT(last);
+ txq->elts_comp = head;
+ if (MLX5_TXOFF_CONFIG(INLINE))
+ txq->wqe_comp = txq->wqe_ci;
+ /* Request unconditional completion on last WQE. */
+ last->cseg.flags = RTE_BE32(MLX5_COMP_ALWAYS <<
+ MLX5_COMP_MODE_OFFSET);
+ /* Save elts_head in dedicated free on completion queue. */
+#ifdef RTE_LIBRTE_MLX5_DEBUG
+ txq->fcqs[txq->cq_pi++ & txq->cqe_m] = head |
+ (last->cseg.opcode >> 8) << 16;
+#else
+ txq->fcqs[txq->cq_pi++ & txq->cqe_m] = head;
+#endif
+ /* A CQE slot must always be available. */
+ MLX5_ASSERT((txq->cq_pi - txq->cq_ci) <= txq->cqe_s);
+ }
+}
+
+/**
+ * Build the Control Segment with specified opcode:
+ * - MLX5_OPCODE_SEND
+ * - MLX5_OPCODE_ENHANCED_MPSW
+ * - MLX5_OPCODE_TSO
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Control Segment.
+ * @param ds
+ * Supposed length of WQE in segments.
+ * @param opcode
+ * SQ WQE opcode to put into Control Segment.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_cseg_init(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc __rte_unused,
+ struct mlx5_wqe *__rte_restrict wqe,
+ unsigned int ds,
+ unsigned int opcode,
+ unsigned int olx __rte_unused)
+{
+ struct mlx5_wqe_cseg *__rte_restrict cs = &wqe->cseg;
+
+ /* For legacy MPW replace the EMPW by TSO with modifier. */
+ if (MLX5_TXOFF_CONFIG(MPW) && opcode == MLX5_OPCODE_ENHANCED_MPSW)
+ opcode = MLX5_OPCODE_TSO | MLX5_OPC_MOD_MPW << 24;
+ cs->opcode = rte_cpu_to_be_32((txq->wqe_ci << 8) | opcode);
+ cs->sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
+ cs->flags = RTE_BE32(MLX5_COMP_ONLY_FIRST_ERR <<
+ MLX5_COMP_MODE_OFFSET);
+ cs->misc = RTE_BE32(0);
+}
+
+/**
+ * Build the Synchronize Queue Segment with specified completion index.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Control Segment.
+ * @param wci
+ * Completion index in Clock Queue to wait.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_qseg_init(struct mlx5_txq_data *restrict txq,
+ struct mlx5_txq_local *restrict loc __rte_unused,
+ struct mlx5_wqe *restrict wqe,
+ unsigned int wci,
+ unsigned int olx __rte_unused)
+{
+ struct mlx5_wqe_qseg *qs;
+
+ qs = RTE_PTR_ADD(wqe, MLX5_WSEG_SIZE);
+ qs->max_index = rte_cpu_to_be_32(wci);
+ qs->qpn_cqn = rte_cpu_to_be_32(txq->sh->txpp.clock_queue.cq_obj.cq->id);
+ qs->reserved0 = RTE_BE32(0);
+ qs->reserved1 = RTE_BE32(0);
+}
+
+/**
+ * Build the Wait on Time Segment with specified timestamp value.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Control Segment.
+ * @param ts
+ * Timesatmp value to wait.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_wseg_init(struct mlx5_txq_data *restrict txq,
+ struct mlx5_txq_local *restrict loc __rte_unused,
+ struct mlx5_wqe *restrict wqe,
+ uint64_t ts,
+ unsigned int olx __rte_unused)
+{
+ struct mlx5_wqe_wseg *ws;
+
+ ws = RTE_PTR_ADD(wqe, MLX5_WSEG_SIZE);
+ ws->operation = rte_cpu_to_be_32(MLX5_WAIT_COND_CYCLIC_BIGGER);
+ ws->lkey = RTE_BE32(0);
+ ws->va_high = RTE_BE32(0);
+ ws->va_low = RTE_BE32(0);
+ if (txq->rt_timestamp) {
+ ts = ts % (uint64_t)NS_PER_S
+ | (ts / (uint64_t)NS_PER_S) << 32;
+ }
+ ws->value = rte_cpu_to_be_64(ts);
+ ws->mask = txq->rt_timemask;
+}
+
+/**
+ * Build the Ethernet Segment without inlined data.
+ * Supports Software Parser, Checksums and VLAN insertion Tx offload features.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Ethernet Segment.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_eseg_none(struct mlx5_txq_data *__rte_restrict txq __rte_unused,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
+ unsigned int olx)
+{
+ struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
+ uint32_t csum;
+
+ /*
+ * Calculate and set check sum flags first, dword field
+ * in segment may be shared with Software Parser flags.
+ */
+ csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
+ es->flags = rte_cpu_to_le_32(csum);
+ /*
+ * Calculate and set Software Parser offsets and flags.
+ * These flags a set for custom UDP and IP tunnel packets.
+ */
+ es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
+ /* Fill metadata field if needed. */
+ es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
+ loc->mbuf->ol_flags & RTE_MBUF_DYNFLAG_TX_METADATA ?
+ rte_cpu_to_be_32(*RTE_FLOW_DYNF_METADATA(loc->mbuf)) :
+ 0 : 0;
+ /* Engage VLAN tag insertion feature if requested. */
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN) {
+ /*
+ * We should get here only if device support
+ * this feature correctly.
+ */
+ MLX5_ASSERT(txq->vlan_en);
+ es->inline_hdr = rte_cpu_to_be_32(MLX5_ETH_WQE_VLAN_INSERT |
+ loc->mbuf->vlan_tci);
+ } else {
+ es->inline_hdr = RTE_BE32(0);
+ }
+}
+
+/**
+ * Build the Ethernet Segment with minimal inlined data
+ * of MLX5_ESEG_MIN_INLINE_SIZE bytes length. This is
+ * used to fill the gap in single WQEBB WQEs.
+ * Supports Software Parser, Checksums and VLAN
+ * insertion Tx offload features.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Ethernet Segment.
+ * @param vlan
+ * Length of VLAN tag insertion if any.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_eseg_dmin(struct mlx5_txq_data *__rte_restrict txq __rte_unused,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
+ unsigned int vlan,
+ unsigned int olx)
+{
+ struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
+ uint32_t csum;
+ uint8_t *psrc, *pdst;
+
+ /*
+ * Calculate and set check sum flags first, dword field
+ * in segment may be shared with Software Parser flags.
+ */
+ csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
+ es->flags = rte_cpu_to_le_32(csum);
+ /*
+ * Calculate and set Software Parser offsets and flags.
+ * These flags a set for custom UDP and IP tunnel packets.
+ */
+ es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
+ /* Fill metadata field if needed. */
+ es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
+ loc->mbuf->ol_flags & RTE_MBUF_DYNFLAG_TX_METADATA ?
+ rte_cpu_to_be_32(*RTE_FLOW_DYNF_METADATA(loc->mbuf)) :
+ 0 : 0;
+ psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
+ es->inline_hdr_sz = RTE_BE16(MLX5_ESEG_MIN_INLINE_SIZE);
+ es->inline_data = *(unaligned_uint16_t *)psrc;
+ psrc += sizeof(uint16_t);
+ pdst = (uint8_t *)(es + 1);
+ if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
+ /* Implement VLAN tag insertion as part inline data. */
+ memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t));
+ pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
+ psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
+ /* Insert VLAN ethertype + VLAN tag. */
+ *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
+ ((RTE_ETHER_TYPE_VLAN << 16) |
+ loc->mbuf->vlan_tci);
+ pdst += sizeof(struct rte_vlan_hdr);
+ /* Copy the rest two bytes from packet data. */
+ MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, sizeof(uint16_t)));
+ *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
+ } else {
+ /* Fill the gap in the title WQEBB with inline data. */
+ rte_mov16(pdst, psrc);
+ }
+}
+
+/**
+ * Build the Ethernet Segment with entire packet data inlining. Checks the
+ * boundary of WQEBB and ring buffer wrapping, supports Software Parser,
+ * Checksums and VLAN insertion Tx offload features.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Ethernet Segment.
+ * @param vlan
+ * Length of VLAN tag insertion if any.
+ * @param inlen
+ * Length of data to inline (VLAN included, if any).
+ * @param tso
+ * TSO flag, set mss field from the packet.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * Pointer to the next Data Segment (aligned and wrapped around).
+ */
+static __rte_always_inline struct mlx5_wqe_dseg *
+mlx5_tx_eseg_data(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
+ unsigned int vlan,
+ unsigned int inlen,
+ unsigned int tso,
+ unsigned int olx)
+{
+ struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
+ uint32_t csum;
+ uint8_t *psrc, *pdst;
+ unsigned int part;
+
+ /*
+ * Calculate and set check sum flags first, dword field
+ * in segment may be shared with Software Parser flags.
+ */
+ csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
+ if (tso) {
+ csum <<= 24;
+ csum |= loc->mbuf->tso_segsz;
+ es->flags = rte_cpu_to_be_32(csum);
+ } else {
+ es->flags = rte_cpu_to_le_32(csum);
+ }
+ /*
+ * Calculate and set Software Parser offsets and flags.
+ * These flags a set for custom UDP and IP tunnel packets.
+ */
+ es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
+ /* Fill metadata field if needed. */
+ es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
+ loc->mbuf->ol_flags & RTE_MBUF_DYNFLAG_TX_METADATA ?
+ rte_cpu_to_be_32(*RTE_FLOW_DYNF_METADATA(loc->mbuf)) :
+ 0 : 0;
+ psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
+ es->inline_hdr_sz = rte_cpu_to_be_16(inlen);
+ es->inline_data = *(unaligned_uint16_t *)psrc;
+ psrc += sizeof(uint16_t);
+ pdst = (uint8_t *)(es + 1);
+ if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
+ /* Implement VLAN tag insertion as part inline data. */
+ memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t));
+ pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
+ psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
+ /* Insert VLAN ethertype + VLAN tag. */
+ *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
+ ((RTE_ETHER_TYPE_VLAN << 16) |
+ loc->mbuf->vlan_tci);
+ pdst += sizeof(struct rte_vlan_hdr);
+ /* Copy the rest two bytes from packet data. */
+ MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, sizeof(uint16_t)));
+ *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
+ psrc += sizeof(uint16_t);
+ } else {
+ /* Fill the gap in the title WQEBB with inline data. */
+ rte_mov16(pdst, psrc);
+ psrc += sizeof(rte_v128u32_t);
+ }
+ pdst = (uint8_t *)(es + 2);
+ MLX5_ASSERT(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
+ MLX5_ASSERT(pdst < (uint8_t *)txq->wqes_end);
+ inlen -= MLX5_ESEG_MIN_INLINE_SIZE;
+ if (!inlen) {
+ MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
+ return (struct mlx5_wqe_dseg *)pdst;
+ }
+ /*
+ * The WQEBB space availability is checked by caller.
+ * Here we should be aware of WQE ring buffer wraparound only.
+ */
+ part = (uint8_t *)txq->wqes_end - pdst;
+ part = RTE_MIN(part, inlen);
+ do {
+ rte_memcpy(pdst, psrc, part);
+ inlen -= part;
+ if (likely(!inlen)) {
+ /*
+ * If return value is not used by the caller
+ * the code below will be optimized out.
+ */
+ pdst += part;
+ pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
+ if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
+ pdst = (uint8_t *)txq->wqes;
+ return (struct mlx5_wqe_dseg *)pdst;
+ }
+ pdst = (uint8_t *)txq->wqes;
+ psrc += part;
+ part = inlen;
+ } while (true);
+}
+
+/**
+ * Copy data from chain of mbuf to the specified linear buffer.
+ * Checksums and VLAN insertion Tx offload features. If data
+ * from some mbuf copied completely this mbuf is freed. Local
+ * structure is used to keep the byte stream state.
+ *
+ * @param pdst
+ * Pointer to the destination linear buffer.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param len
+ * Length of data to be copied.
+ * @param must
+ * Length of data to be copied ignoring no inline hint.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * Number of actual copied data bytes. This is always greater than or
+ * equal to must parameter and might be lesser than len in no inline
+ * hint flag is encountered.
+ */
+static __rte_always_inline unsigned int
+mlx5_tx_mseg_memcpy(uint8_t *pdst,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int len,
+ unsigned int must,
+ unsigned int olx __rte_unused)
+{
+ struct rte_mbuf *mbuf;
+ unsigned int part, dlen, copy = 0;
+ uint8_t *psrc;
+
+ MLX5_ASSERT(len);
+ do {
+ /* Allow zero length packets, must check first. */
+ dlen = rte_pktmbuf_data_len(loc->mbuf);
+ if (dlen <= loc->mbuf_off) {
+ /* Exhausted packet, just free. */
+ mbuf = loc->mbuf;
+ loc->mbuf = mbuf->next;
+ rte_pktmbuf_free_seg(mbuf);
+ loc->mbuf_off = 0;
+ MLX5_ASSERT(loc->mbuf_nseg > 1);
+ MLX5_ASSERT(loc->mbuf);
+ --loc->mbuf_nseg;
+ if (loc->mbuf->ol_flags & RTE_MBUF_F_TX_DYNF_NOINLINE) {
+ unsigned int diff;
+
+ if (copy >= must) {
+ /*
+ * We already copied the minimal
+ * requested amount of data.
+ */
+ return copy;
+ }
+ diff = must - copy;
+ if (diff <= rte_pktmbuf_data_len(loc->mbuf)) {
+ /*
+ * Copy only the minimal required
+ * part of the data buffer. Limit amount
+ * of data to be copied to the length of
+ * available space.
+ */
+ len = RTE_MIN(len, diff);
+ }
+ }
+ continue;
+ }
+ dlen -= loc->mbuf_off;
+ psrc = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
+ loc->mbuf_off);
+ part = RTE_MIN(len, dlen);
+ rte_memcpy(pdst, psrc, part);
+ copy += part;
+ loc->mbuf_off += part;
+ len -= part;
+ if (!len) {
+ if (loc->mbuf_off >= rte_pktmbuf_data_len(loc->mbuf)) {
+ loc->mbuf_off = 0;
+ /* Exhausted packet, just free. */
+ mbuf = loc->mbuf;
+ loc->mbuf = mbuf->next;
+ rte_pktmbuf_free_seg(mbuf);
+ loc->mbuf_off = 0;
+ MLX5_ASSERT(loc->mbuf_nseg >= 1);
+ --loc->mbuf_nseg;
+ }
+ return copy;
+ }
+ pdst += part;
+ } while (true);
+}
+
+/**
+ * Build the Ethernet Segment with inlined data from multi-segment packet.
+ * Checks the boundary of WQEBB and ring buffer wrapping, supports Software
+ * Parser, Checksums and VLAN insertion Tx offload features.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Ethernet Segment.
+ * @param vlan
+ * Length of VLAN tag insertion if any.
+ * @param inlen
+ * Length of data to inline (VLAN included, if any).
+ * @param tso
+ * TSO flag, set mss field from the packet.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * Pointer to the next Data Segment (aligned and possible NOT wrapped
+ * around - caller should do wrapping check on its own).
+ */
+static __rte_always_inline struct mlx5_wqe_dseg *
+mlx5_tx_eseg_mdat(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
+ unsigned int vlan,
+ unsigned int inlen,
+ unsigned int tso,
+ unsigned int olx)
+{
+ struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
+ uint32_t csum;
+ uint8_t *pdst;
+ unsigned int part, tlen = 0;
+
+ /*
+ * Calculate and set check sum flags first, uint32_t field
+ * in segment may be shared with Software Parser flags.
+ */
+ csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
+ if (tso) {
+ csum <<= 24;
+ csum |= loc->mbuf->tso_segsz;
+ es->flags = rte_cpu_to_be_32(csum);
+ } else {
+ es->flags = rte_cpu_to_le_32(csum);
+ }
+ /*
+ * Calculate and set Software Parser offsets and flags.
+ * These flags a set for custom UDP and IP tunnel packets.
+ */
+ es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
+ /* Fill metadata field if needed. */
+ es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
+ loc->mbuf->ol_flags & RTE_MBUF_DYNFLAG_TX_METADATA ?
+ rte_cpu_to_be_32(*RTE_FLOW_DYNF_METADATA(loc->mbuf)) :
+ 0 : 0;
+ MLX5_ASSERT(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
+ pdst = (uint8_t *)&es->inline_data;
+ if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
+ /* Implement VLAN tag insertion as part inline data. */
+ mlx5_tx_mseg_memcpy(pdst, loc,
+ 2 * RTE_ETHER_ADDR_LEN,
+ 2 * RTE_ETHER_ADDR_LEN, olx);
+ pdst += 2 * RTE_ETHER_ADDR_LEN;
+ *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
+ ((RTE_ETHER_TYPE_VLAN << 16) |
+ loc->mbuf->vlan_tci);
+ pdst += sizeof(struct rte_vlan_hdr);
+ tlen += 2 * RTE_ETHER_ADDR_LEN + sizeof(struct rte_vlan_hdr);
+ }
+ MLX5_ASSERT(pdst < (uint8_t *)txq->wqes_end);
+ /*
+ * The WQEBB space availability is checked by caller.
+ * Here we should be aware of WQE ring buffer wraparound only.
+ */
+ part = (uint8_t *)txq->wqes_end - pdst;
+ part = RTE_MIN(part, inlen - tlen);
+ MLX5_ASSERT(part);
+ do {
+ unsigned int copy;
+
+ /*
+ * Copying may be interrupted inside the routine
+ * if run into no inline hint flag.
+ */
+ copy = tso ? inlen : txq->inlen_mode;
+ copy = tlen >= copy ? 0 : (copy - tlen);
+ copy = mlx5_tx_mseg_memcpy(pdst, loc, part, copy, olx);
+ tlen += copy;
+ if (likely(inlen <= tlen) || copy < part) {
+ es->inline_hdr_sz = rte_cpu_to_be_16(tlen);
+ pdst += copy;
+ pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
+ return (struct mlx5_wqe_dseg *)pdst;
+ }
+ pdst = (uint8_t *)txq->wqes;
+ part = inlen - tlen;
+ } while (true);
+}
+
+/**
+ * Build the Data Segment of pointer type.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param dseg
+ * Pointer to WQE to fill with built Data Segment.
+ * @param buf
+ * Data buffer to point.
+ * @param len
+ * Data buffer length.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_dseg_ptr(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe_dseg *__rte_restrict dseg,
+ uint8_t *buf,
+ unsigned int len,
+ unsigned int olx __rte_unused)
+
+{
+ MLX5_ASSERT(len);
+ dseg->bcount = rte_cpu_to_be_32(len);
+ dseg->lkey = mlx5_mr_mb2mr(&txq->mr_ctrl, loc->mbuf);
+ dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
+}
+
+/**
+ * Build the Data Segment of pointer type or inline if data length is less than
+ * buffer in minimal Data Segment size.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param dseg
+ * Pointer to WQE to fill with built Data Segment.
+ * @param buf
+ * Data buffer to point.
+ * @param len
+ * Data buffer length.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_dseg_iptr(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe_dseg *__rte_restrict dseg,
+ uint8_t *buf,
+ unsigned int len,
+ unsigned int olx __rte_unused)
+
+{
+ uintptr_t dst, src;
+
+ MLX5_ASSERT(len);
+ if (len > MLX5_DSEG_MIN_INLINE_SIZE) {
+ dseg->bcount = rte_cpu_to_be_32(len);
+ dseg->lkey = mlx5_mr_mb2mr(&txq->mr_ctrl, loc->mbuf);
+ dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
+
+ return;
+ }
+ dseg->bcount = rte_cpu_to_be_32(len | MLX5_ETH_WQE_DATA_INLINE);
+ /* Unrolled implementation of generic rte_memcpy. */
+ dst = (uintptr_t)&dseg->inline_data[0];
+ src = (uintptr_t)buf;
+ if (len & 0x08) {
+#ifdef RTE_ARCH_STRICT_ALIGN
+ MLX5_ASSERT(dst == RTE_PTR_ALIGN(dst, sizeof(uint32_t)));
+ *(uint32_t *)dst = *(unaligned_uint32_t *)src;
+ dst += sizeof(uint32_t);
+ src += sizeof(uint32_t);
+ *(uint32_t *)dst = *(unaligned_uint32_t *)src;
+ dst += sizeof(uint32_t);
+ src += sizeof(uint32_t);
+#else
+ *(uint64_t *)dst = *(unaligned_uint64_t *)src;
+ dst += sizeof(uint64_t);
+ src += sizeof(uint64_t);
+#endif
+ }
+ if (len & 0x04) {
+ *(uint32_t *)dst = *(unaligned_uint32_t *)src;
+ dst += sizeof(uint32_t);
+ src += sizeof(uint32_t);
+ }
+ if (len & 0x02) {
+ *(uint16_t *)dst = *(unaligned_uint16_t *)src;
+ dst += sizeof(uint16_t);
+ src += sizeof(uint16_t);
+ }
+ if (len & 0x01)
+ *(uint8_t *)dst = *(uint8_t *)src;
+}
+
+/**
+ * Build the Data Segment of inlined data from single
+ * segment packet, no VLAN insertion.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param dseg
+ * Pointer to WQE to fill with built Data Segment.
+ * @param buf
+ * Data buffer to point.
+ * @param len
+ * Data buffer length.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * Pointer to the next Data Segment after inlined data.
+ * Ring buffer wraparound check is needed. We do not do it here because it
+ * may not be needed for the last packet in the eMPW session.
+ */
+static __rte_always_inline struct mlx5_wqe_dseg *
+mlx5_tx_dseg_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc __rte_unused,
+ struct mlx5_wqe_dseg *__rte_restrict dseg,
+ uint8_t *buf,
+ unsigned int len,
+ unsigned int olx __rte_unused)
+{
+ unsigned int part;
+ uint8_t *pdst;
+
+ if (!MLX5_TXOFF_CONFIG(MPW)) {
+ /* Store the descriptor byte counter for eMPW sessions. */
+ dseg->bcount = rte_cpu_to_be_32(len | MLX5_ETH_WQE_DATA_INLINE);
+ pdst = &dseg->inline_data[0];
+ } else {
+ /* The entire legacy MPW session counter is stored on close. */
+ pdst = (uint8_t *)dseg;
+ }
+ /*
+ * The WQEBB space availability is checked by caller.
+ * Here we should be aware of WQE ring buffer wraparound only.
+ */
+ part = (uint8_t *)txq->wqes_end - pdst;
+ part = RTE_MIN(part, len);
+ do {
+ rte_memcpy(pdst, buf, part);
+ len -= part;
+ if (likely(!len)) {
+ pdst += part;
+ if (!MLX5_TXOFF_CONFIG(MPW))
+ pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
+ /* Note: no final wraparound check here. */
+ return (struct mlx5_wqe_dseg *)pdst;
+ }
+ pdst = (uint8_t *)txq->wqes;
+ buf += part;
+ part = len;
+ } while (true);
+}
+
+/**
+ * Build the Data Segment of inlined data from single
+ * segment packet with VLAN insertion.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param dseg
+ * Pointer to the dseg fill with built Data Segment.
+ * @param buf
+ * Data buffer to point.
+ * @param len
+ * Data buffer length.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * Pointer to the next Data Segment after inlined data.
+ * Ring buffer wraparound check is needed.
+ */
+static __rte_always_inline struct mlx5_wqe_dseg *
+mlx5_tx_dseg_vlan(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc __rte_unused,
+ struct mlx5_wqe_dseg *__rte_restrict dseg,
+ uint8_t *buf,
+ unsigned int len,
+ unsigned int olx __rte_unused)
+
+{
+ unsigned int part;
+ uint8_t *pdst;
+
+ MLX5_ASSERT(len > MLX5_ESEG_MIN_INLINE_SIZE);
+ if (!MLX5_TXOFF_CONFIG(MPW)) {
+ /* Store the descriptor byte counter for eMPW sessions. */
+ dseg->bcount = rte_cpu_to_be_32
+ ((len + sizeof(struct rte_vlan_hdr)) |
+ MLX5_ETH_WQE_DATA_INLINE);
+ pdst = &dseg->inline_data[0];
+ } else {
+ /* The entire legacy MPW session counter is stored on close. */
+ pdst = (uint8_t *)dseg;
+ }
+ memcpy(pdst, buf, MLX5_DSEG_MIN_INLINE_SIZE);
+ buf += MLX5_DSEG_MIN_INLINE_SIZE;
+ pdst += MLX5_DSEG_MIN_INLINE_SIZE;
+ len -= MLX5_DSEG_MIN_INLINE_SIZE;
+ /* Insert VLAN ethertype + VLAN tag. Pointer is aligned. */
+ MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
+ if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
+ pdst = (uint8_t *)txq->wqes;
+ *(uint32_t *)pdst = rte_cpu_to_be_32((RTE_ETHER_TYPE_VLAN << 16) |
+ loc->mbuf->vlan_tci);
+ pdst += sizeof(struct rte_vlan_hdr);
+ /*
+ * The WQEBB space availability is checked by caller.
+ * Here we should be aware of WQE ring buffer wraparound only.
+ */
+ part = (uint8_t *)txq->wqes_end - pdst;
+ part = RTE_MIN(part, len);
+ do {
+ rte_memcpy(pdst, buf, part);
+ len -= part;
+ if (likely(!len)) {
+ pdst += part;
+ if (!MLX5_TXOFF_CONFIG(MPW))
+ pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
+ /* Note: no final wraparound check here. */
+ return (struct mlx5_wqe_dseg *)pdst;
+ }
+ pdst = (uint8_t *)txq->wqes;
+ buf += part;
+ part = len;
+ } while (true);
+}
+
+/**
+ * Build the Ethernet Segment with optionally inlined data with
+ * VLAN insertion and following Data Segments (if any) from
+ * multi-segment packet. Used by ordinary send and TSO.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Ethernet/Data Segments.
+ * @param vlan
+ * Length of VLAN header to insert, 0 means no VLAN insertion.
+ * @param inlen
+ * Data length to inline. For TSO this parameter specifies exact value,
+ * for ordinary send routine can be aligned by caller to provide better WQE
+ * space saving and data buffer start address alignment.
+ * This length includes VLAN header being inserted.
+ * @param tso
+ * Zero means ordinary send, inlined data can be extended,
+ * otherwise this is TSO, inlined data length is fixed.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * Actual size of built WQE in segments.
+ */
+static __rte_always_inline unsigned int
+mlx5_tx_mseg_build(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
+ unsigned int vlan,
+ unsigned int inlen,
+ unsigned int tso,
+ unsigned int olx __rte_unused)
+{
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ unsigned int ds;
+
+ MLX5_ASSERT((rte_pktmbuf_pkt_len(loc->mbuf) + vlan) >= inlen);
+ loc->mbuf_nseg = NB_SEGS(loc->mbuf);
+ loc->mbuf_off = 0;
+
+ dseg = mlx5_tx_eseg_mdat(txq, loc, wqe, vlan, inlen, tso, olx);
+ if (!loc->mbuf_nseg)
+ goto dseg_done;
+ /*
+ * There are still some mbuf remaining, not inlined.
+ * The first mbuf may be partially inlined and we
+ * must process the possible non-zero data offset.
+ */
+ if (loc->mbuf_off) {
+ unsigned int dlen;
+ uint8_t *dptr;
+
+ /*
+ * Exhausted packets must be dropped before.
+ * Non-zero offset means there are some data
+ * remained in the packet.
+ */
+ MLX5_ASSERT(loc->mbuf_off < rte_pktmbuf_data_len(loc->mbuf));
+ MLX5_ASSERT(rte_pktmbuf_data_len(loc->mbuf));
+ dptr = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
+ loc->mbuf_off);
+ dlen = rte_pktmbuf_data_len(loc->mbuf) - loc->mbuf_off;
+ /*
+ * Build the pointer/minimal Data Segment.
+ * Do ring buffer wrapping check in advance.
+ */
+ if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
+ dseg = (struct mlx5_wqe_dseg *)txq->wqes;
+ mlx5_tx_dseg_iptr(txq, loc, dseg, dptr, dlen, olx);
+ /* Store the mbuf to be freed on completion. */
+ MLX5_ASSERT(loc->elts_free);
+ txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
+ --loc->elts_free;
+ ++dseg;
+ if (--loc->mbuf_nseg == 0)
+ goto dseg_done;
+ loc->mbuf = loc->mbuf->next;
+ loc->mbuf_off = 0;
+ }
+ do {
+ if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
+ struct rte_mbuf *mbuf;
+
+ /* Zero length segment found, just skip. */
+ mbuf = loc->mbuf;
+ loc->mbuf = loc->mbuf->next;
+ rte_pktmbuf_free_seg(mbuf);
+ if (--loc->mbuf_nseg == 0)
+ break;
+ } else {
+ if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
+ dseg = (struct mlx5_wqe_dseg *)txq->wqes;
+ mlx5_tx_dseg_iptr
+ (txq, loc, dseg,
+ rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
+ rte_pktmbuf_data_len(loc->mbuf), olx);
+ MLX5_ASSERT(loc->elts_free);
+ txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
+ --loc->elts_free;
+ ++dseg;
+ if (--loc->mbuf_nseg == 0)
+ break;
+ loc->mbuf = loc->mbuf->next;
+ }
+ } while (true);
+
+dseg_done:
+ /* Calculate actual segments used from the dseg pointer. */
+ if ((uintptr_t)wqe < (uintptr_t)dseg)
+ ds = ((uintptr_t)dseg - (uintptr_t)wqe) / MLX5_WSEG_SIZE;
+ else
+ ds = (((uintptr_t)dseg - (uintptr_t)wqe) +
+ txq->wqe_s * MLX5_WQE_SIZE) / MLX5_WSEG_SIZE;
+ return ds;
+}
+
+/**
+ * The routine checks timestamp flag in the current packet,
+ * and push WAIT WQE into the queue if scheduling is required.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_SINGLE - continue processing with the packet.
+ * MLX5_TXCMP_CODE_MULTI - the WAIT inserted, continue processing.
+ * Local context variables partially updated.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_schedule_send(struct mlx5_txq_data *restrict txq,
+ struct mlx5_txq_local *restrict loc,
+ unsigned int olx)
+{
+ if (MLX5_TXOFF_CONFIG(TXPP) &&
+ loc->mbuf->ol_flags & txq->ts_mask) {
+ struct mlx5_dev_ctx_shared *sh;
+ struct mlx5_wqe *wqe;
+ uint64_t ts;
+
+ /*
+ * Estimate the required space quickly and roughly.
+ * We would like to ensure the packet can be pushed
+ * to the queue and we won't get the orphan WAIT WQE.
+ */
+ if (loc->wqe_free <= MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE ||
+ loc->elts_free < NB_SEGS(loc->mbuf))
+ return MLX5_TXCMP_CODE_EXIT;
+ /* Convert the timestamp into completion to wait. */
+ ts = *RTE_MBUF_DYNFIELD(loc->mbuf, txq->ts_offset, uint64_t *);
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ sh = txq->sh;
+ if (txq->wait_on_time) {
+ /* The wait on time capability should be used. */
+ ts -= sh->txpp.skew;
+ mlx5_tx_cseg_init(txq, loc, wqe,
+ 1 + sizeof(struct mlx5_wqe_wseg) /
+ MLX5_WSEG_SIZE,
+ MLX5_OPCODE_WAIT |
+ MLX5_OPC_MOD_WAIT_TIME << 24, olx);
+ mlx5_tx_wseg_init(txq, loc, wqe, ts, olx);
+ } else {
+ /* Legacy cross-channel operation should be used. */
+ int32_t wci;
+
+ wci = mlx5_txpp_convert_tx_ts(sh, ts);
+ if (unlikely(wci < 0))
+ return MLX5_TXCMP_CODE_SINGLE;
+ /* Build the WAIT WQE with specified completion. */
+ mlx5_tx_cseg_init(txq, loc, wqe,
+ 1 + sizeof(struct mlx5_wqe_qseg) /
+ MLX5_WSEG_SIZE,
+ MLX5_OPCODE_WAIT |
+ MLX5_OPC_MOD_WAIT_CQ_PI << 24, olx);
+ mlx5_tx_qseg_init(txq, loc, wqe, wci, olx);
+ }
+ ++txq->wqe_ci;
+ --loc->wqe_free;
+ return MLX5_TXCMP_CODE_MULTI;
+ }
+ return MLX5_TXCMP_CODE_SINGLE;
+}
+
+/**
+ * Tx one packet function for multi-segment TSO. Supports all
+ * types of Tx offloads, uses MLX5_OPCODE_TSO to build WQEs,
+ * sends one packet per WQE.
+ *
+ * This routine is responsible for storing processed mbuf
+ * into elts ring buffer and update elts_head.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
+ * Local context variables partially updated.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_packet_multi_tso(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ struct mlx5_wqe *__rte_restrict wqe;
+ unsigned int ds, dlen, inlen, ntcp, vlan = 0;
+
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ /*
+ * Calculate data length to be inlined to estimate
+ * the required space in WQE ring buffer.
+ */
+ dlen = rte_pktmbuf_pkt_len(loc->mbuf);
+ if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN)
+ vlan = sizeof(struct rte_vlan_hdr);
+ inlen = loc->mbuf->l2_len + vlan +
+ loc->mbuf->l3_len + loc->mbuf->l4_len;
+ if (unlikely((!inlen || !loc->mbuf->tso_segsz)))
+ return MLX5_TXCMP_CODE_ERROR;
+ if (loc->mbuf->ol_flags & RTE_MBUF_F_TX_TUNNEL_MASK)
+ inlen += loc->mbuf->outer_l2_len + loc->mbuf->outer_l3_len;
+ /* Packet must contain all TSO headers. */
+ if (unlikely(inlen > MLX5_MAX_TSO_HEADER ||
+ inlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
+ inlen > (dlen + vlan)))
+ return MLX5_TXCMP_CODE_ERROR;
+ /*
+ * Check whether there are enough free WQEBBs:
+ * - Control Segment
+ * - Ethernet Segment
+ * - First Segment of inlined Ethernet data
+ * - ... data continued ...
+ * - Data Segments of pointer/min inline type
+ */
+ ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
+ MLX5_ESEG_MIN_INLINE_SIZE +
+ MLX5_WSEG_SIZE +
+ MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
+ if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
+ return MLX5_TXCMP_CODE_EXIT;
+ /* Check for maximal WQE size. */
+ if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
+ return MLX5_TXCMP_CODE_ERROR;
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes/packets counters. */
+ ntcp = (dlen - (inlen - vlan) + loc->mbuf->tso_segsz - 1) /
+ loc->mbuf->tso_segsz;
+ /*
+ * One will be added for mbuf itself at the end of the mlx5_tx_burst
+ * from loc->pkts_sent field.
+ */
+ --ntcp;
+ txq->stats.opackets += ntcp;
+ txq->stats.obytes += dlen + vlan + ntcp * inlen;
+#endif
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_TSO, olx);
+ ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 1, olx);
+ wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
+ txq->wqe_ci += (ds + 3) / 4;
+ loc->wqe_free -= (ds + 3) / 4;
+ return MLX5_TXCMP_CODE_MULTI;
+}
+
+/**
+ * Tx one packet function for multi-segment SEND. Supports all types of Tx
+ * offloads, uses MLX5_OPCODE_SEND to build WQEs, sends one packet per WQE,
+ * without any data inlining in Ethernet Segment.
+ *
+ * This routine is responsible for storing processed mbuf
+ * into elts ring buffer and update elts_head.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
+ * Local context variables partially updated.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_packet_multi_send(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ struct mlx5_wqe *__rte_restrict wqe;
+ unsigned int ds, nseg;
+
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ /*
+ * No inline at all, it means the CPU cycles saving is prioritized at
+ * configuration, we should not copy any packet data to WQE.
+ */
+ nseg = NB_SEGS(loc->mbuf);
+ ds = 2 + nseg;
+ if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
+ return MLX5_TXCMP_CODE_EXIT;
+ /* Check for maximal WQE size. */
+ if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
+ return MLX5_TXCMP_CODE_ERROR;
+ /*
+ * Some Tx offloads may cause an error if packet is not long enough,
+ * check against assumed minimal length.
+ */
+ if (rte_pktmbuf_pkt_len(loc->mbuf) <= MLX5_ESEG_MIN_INLINE_SIZE)
+ return MLX5_TXCMP_CODE_ERROR;
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ txq->stats.obytes += rte_pktmbuf_pkt_len(loc->mbuf);
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN)
+ txq->stats.obytes += sizeof(struct rte_vlan_hdr);
+#endif
+ /*
+ * SEND WQE, one WQEBB:
+ * - Control Segment, SEND opcode
+ * - Ethernet Segment, optional VLAN, no inline
+ * - Data Segments, pointer only type
+ */
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, ds, MLX5_OPCODE_SEND, olx);
+ mlx5_tx_eseg_none(txq, loc, wqe, olx);
+ dseg = &wqe->dseg[0];
+ do {
+ if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
+ struct rte_mbuf *mbuf;
+
+ /*
+ * Zero length segment found, have to correct total
+ * size of WQE in segments.
+ * It is supposed to be rare occasion, so in normal
+ * case (no zero length segments) we avoid extra
+ * writing to the Control Segment.
+ */
+ --ds;
+ wqe->cseg.sq_ds -= RTE_BE32(1);
+ mbuf = loc->mbuf;
+ loc->mbuf = mbuf->next;
+ rte_pktmbuf_free_seg(mbuf);
+ if (--nseg == 0)
+ break;
+ } else {
+ mlx5_tx_dseg_ptr
+ (txq, loc, dseg,
+ rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
+ rte_pktmbuf_data_len(loc->mbuf), olx);
+ txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
+ --loc->elts_free;
+ if (--nseg == 0)
+ break;
+ ++dseg;
+ if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
+ dseg = (struct mlx5_wqe_dseg *)txq->wqes;
+ loc->mbuf = loc->mbuf->next;
+ }
+ } while (true);
+ txq->wqe_ci += (ds + 3) / 4;
+ loc->wqe_free -= (ds + 3) / 4;
+ return MLX5_TXCMP_CODE_MULTI;
+}
+
+/**
+ * Tx one packet function for multi-segment SEND. Supports all
+ * types of Tx offloads, uses MLX5_OPCODE_SEND to build WQEs,
+ * sends one packet per WQE, with data inlining in
+ * Ethernet Segment and minimal Data Segments.
+ *
+ * This routine is responsible for storing processed mbuf
+ * into elts ring buffer and update elts_head.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
+ * Local context variables partially updated.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_packet_multi_inline(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ struct mlx5_wqe *__rte_restrict wqe;
+ unsigned int ds, inlen, dlen, vlan = 0;
+
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ /*
+ * First calculate data length to be inlined
+ * to estimate the required space for WQE.
+ */
+ dlen = rte_pktmbuf_pkt_len(loc->mbuf);
+ if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN)
+ vlan = sizeof(struct rte_vlan_hdr);
+ inlen = dlen + vlan;
+ /* Check against minimal length. */
+ if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
+ return MLX5_TXCMP_CODE_ERROR;
+ MLX5_ASSERT(txq->inlen_send >= MLX5_ESEG_MIN_INLINE_SIZE);
+ if (inlen > txq->inlen_send ||
+ loc->mbuf->ol_flags & RTE_MBUF_F_TX_DYNF_NOINLINE) {
+ struct rte_mbuf *mbuf;
+ unsigned int nxlen;
+ uintptr_t start;
+
+ mbuf = loc->mbuf;
+ nxlen = rte_pktmbuf_data_len(mbuf);
+ /*
+ * Packet length exceeds the allowed inline data length,
+ * check whether the minimal inlining is required.
+ */
+ if (txq->inlen_mode) {
+ MLX5_ASSERT(txq->inlen_mode >=
+ MLX5_ESEG_MIN_INLINE_SIZE);
+ MLX5_ASSERT(txq->inlen_mode <= txq->inlen_send);
+ inlen = RTE_MIN(txq->inlen_mode, inlen);
+ } else if (vlan && !txq->vlan_en) {
+ /*
+ * VLAN insertion is requested and hardware does not
+ * support the offload, will do with software inline.
+ */
+ inlen = MLX5_ESEG_MIN_INLINE_SIZE;
+ } else if (mbuf->ol_flags & RTE_MBUF_F_TX_DYNF_NOINLINE ||
+ nxlen > txq->inlen_send) {
+ return mlx5_tx_packet_multi_send(txq, loc, olx);
+ } else {
+ goto do_first;
+ }
+ if (mbuf->ol_flags & RTE_MBUF_F_TX_DYNF_NOINLINE)
+ goto do_build;
+ /*
+ * Now we know the minimal amount of data is requested
+ * to inline. Check whether we should inline the buffers
+ * from the chain beginning to eliminate some mbufs.
+ */
+ if (unlikely(nxlen <= txq->inlen_send)) {
+ /* We can inline first mbuf at least. */
+ if (nxlen < inlen) {
+ unsigned int smlen;
+
+ /* Scan mbufs till inlen filled. */
+ do {
+ smlen = nxlen;
+ mbuf = NEXT(mbuf);
+ MLX5_ASSERT(mbuf);
+ nxlen = rte_pktmbuf_data_len(mbuf);
+ nxlen += smlen;
+ } while (unlikely(nxlen < inlen));
+ if (unlikely(nxlen > txq->inlen_send)) {
+ /* We cannot inline entire mbuf. */
+ smlen = inlen - smlen;
+ start = rte_pktmbuf_mtod_offset
+ (mbuf, uintptr_t, smlen);
+ goto do_align;
+ }
+ }
+do_first:
+ do {
+ inlen = nxlen;
+ mbuf = NEXT(mbuf);
+ /* There should be not end of packet. */
+ MLX5_ASSERT(mbuf);
+ if (mbuf->ol_flags & RTE_MBUF_F_TX_DYNF_NOINLINE)
+ break;
+ nxlen = inlen + rte_pktmbuf_data_len(mbuf);
+ } while (unlikely(nxlen < txq->inlen_send));
+ }
+ start = rte_pktmbuf_mtod(mbuf, uintptr_t);
+ /*
+ * Check whether we can do inline to align start
+ * address of data buffer to cacheline.
+ */
+do_align:
+ start = (~start + 1) & (RTE_CACHE_LINE_SIZE - 1);
+ if (unlikely(start)) {
+ start += inlen;
+ if (start <= txq->inlen_send)
+ inlen = start;
+ }
+ }
+ /*
+ * Check whether there are enough free WQEBBs:
+ * - Control Segment
+ * - Ethernet Segment
+ * - First Segment of inlined Ethernet data
+ * - ... data continued ...
+ * - Data Segments of pointer/min inline type
+ *
+ * Estimate the number of Data Segments conservatively,
+ * supposing no any mbufs is being freed during inlining.
+ */
+do_build:
+ MLX5_ASSERT(inlen <= txq->inlen_send);
+ ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
+ MLX5_ESEG_MIN_INLINE_SIZE +
+ MLX5_WSEG_SIZE +
+ MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
+ if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
+ return MLX5_TXCMP_CODE_EXIT;
+ /* Check for maximal WQE size. */
+ if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ds))
+ return MLX5_TXCMP_CODE_ERROR;
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes/packets counters. */
+ txq->stats.obytes += dlen + vlan;
+#endif
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_SEND, olx);
+ ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 0, olx);
+ wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
+ txq->wqe_ci += (ds + 3) / 4;
+ loc->wqe_free -= (ds + 3) / 4;
+ return MLX5_TXCMP_CODE_MULTI;
+}
+
+/**
+ * Tx burst function for multi-segment packets. Supports all
+ * types of Tx offloads, uses MLX5_OPCODE_SEND/TSO to build WQEs,
+ * sends one packet per WQE. Function stops sending if it
+ * encounters the single-segment packet.
+ *
+ * This routine is responsible for storing processed mbuf
+ * into elts ring buffer and update elts_head.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param[in] pkts
+ * Packets to transmit.
+ * @param pkts_n
+ * Number of packets in array.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
+ * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
+ * MLX5_TXCMP_CODE_TSO - TSO single-segment packet encountered.
+ * Local context variables updated.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_burst_mseg(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ MLX5_ASSERT(loc->elts_free && loc->wqe_free);
+ MLX5_ASSERT(pkts_n > loc->pkts_sent);
+ pkts += loc->pkts_sent + 1;
+ pkts_n -= loc->pkts_sent;
+ for (;;) {
+ enum mlx5_txcmp_code ret;
+
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
+ /*
+ * Estimate the number of free elts quickly but conservatively.
+ * Some segment may be fully inlined and freed,
+ * ignore this here - precise estimation is costly.
+ */
+ if (loc->elts_free < NB_SEGS(loc->mbuf))
+ return MLX5_TXCMP_CODE_EXIT;
+ if (MLX5_TXOFF_CONFIG(TSO) &&
+ unlikely(loc->mbuf->ol_flags & RTE_MBUF_F_TX_TCP_SEG)) {
+ /* Proceed with multi-segment TSO. */
+ ret = mlx5_tx_packet_multi_tso(txq, loc, olx);
+ } else if (MLX5_TXOFF_CONFIG(INLINE)) {
+ /* Proceed with multi-segment SEND with inlining. */
+ ret = mlx5_tx_packet_multi_inline(txq, loc, olx);
+ } else {
+ /* Proceed with multi-segment SEND w/o inlining. */
+ ret = mlx5_tx_packet_multi_send(txq, loc, olx);
+ }
+ if (ret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (ret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ /* WQE is built, go to the next packet. */
+ ++loc->pkts_sent;
+ --pkts_n;
+ if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ loc->mbuf = *pkts++;
+ if (pkts_n > 1)
+ rte_prefetch0(*pkts);
+ if (likely(NB_SEGS(loc->mbuf) > 1))
+ continue;
+ /* Here ends the series of multi-segment packets. */
+ if (MLX5_TXOFF_CONFIG(TSO) &&
+ unlikely(loc->mbuf->ol_flags & RTE_MBUF_F_TX_TCP_SEG))
+ return MLX5_TXCMP_CODE_TSO;
+ return MLX5_TXCMP_CODE_SINGLE;
+ }
+ MLX5_ASSERT(false);
+}
+
+/**
+ * Tx burst function for single-segment packets with TSO.
+ * Supports all types of Tx offloads, except multi-packets.
+ * Uses MLX5_OPCODE_TSO to build WQEs, sends one packet per WQE.
+ * Function stops sending if it encounters the multi-segment
+ * packet or packet without TSO requested.
+ *
+ * The routine is responsible for storing processed mbuf into elts ring buffer
+ * and update elts_head if inline offloads is requested due to possible early
+ * freeing of the inlined mbufs (can not store pkts array in elts as a batch).
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param[in] pkts
+ * Packets to transmit.
+ * @param pkts_n
+ * Number of packets in array.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
+ * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
+ * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
+ * Local context variables updated.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_burst_tso(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ MLX5_ASSERT(loc->elts_free && loc->wqe_free);
+ MLX5_ASSERT(pkts_n > loc->pkts_sent);
+ pkts += loc->pkts_sent + 1;
+ pkts_n -= loc->pkts_sent;
+ for (;;) {
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ struct mlx5_wqe *__rte_restrict wqe;
+ unsigned int ds, dlen, hlen, ntcp, vlan = 0;
+ uint8_t *dptr;
+
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ dlen = rte_pktmbuf_data_len(loc->mbuf);
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN) {
+ vlan = sizeof(struct rte_vlan_hdr);
+ }
+ /*
+ * First calculate the WQE size to check
+ * whether we have enough space in ring buffer.
+ */
+ hlen = loc->mbuf->l2_len + vlan +
+ loc->mbuf->l3_len + loc->mbuf->l4_len;
+ if (unlikely((!hlen || !loc->mbuf->tso_segsz)))
+ return MLX5_TXCMP_CODE_ERROR;
+ if (loc->mbuf->ol_flags & RTE_MBUF_F_TX_TUNNEL_MASK)
+ hlen += loc->mbuf->outer_l2_len +
+ loc->mbuf->outer_l3_len;
+ /* Segment must contain all TSO headers. */
+ if (unlikely(hlen > MLX5_MAX_TSO_HEADER ||
+ hlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
+ hlen > (dlen + vlan)))
+ return MLX5_TXCMP_CODE_ERROR;
+ /*
+ * Check whether there are enough free WQEBBs:
+ * - Control Segment
+ * - Ethernet Segment
+ * - First Segment of inlined Ethernet data
+ * - ... data continued ...
+ * - Finishing Data Segment of pointer type
+ */
+ ds = 4 + (hlen - MLX5_ESEG_MIN_INLINE_SIZE +
+ MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
+ if (loc->wqe_free < ((ds + 3) / 4))
+ return MLX5_TXCMP_CODE_EXIT;
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes/packets counters. */
+ ntcp = (dlen + vlan - hlen +
+ loc->mbuf->tso_segsz - 1) /
+ loc->mbuf->tso_segsz;
+ /*
+ * One will be added for mbuf itself at the end
+ * of the mlx5_tx_burst from loc->pkts_sent field.
+ */
+ --ntcp;
+ txq->stats.opackets += ntcp;
+ txq->stats.obytes += dlen + vlan + ntcp * hlen;
+#endif
+ /*
+ * Build the TSO WQE:
+ * - Control Segment
+ * - Ethernet Segment with hlen bytes inlined
+ * - Data Segment of pointer type
+ */
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, ds,
+ MLX5_OPCODE_TSO, olx);
+ dseg = mlx5_tx_eseg_data(txq, loc, wqe, vlan, hlen, 1, olx);
+ dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) + hlen - vlan;
+ dlen -= hlen - vlan;
+ mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
+ /*
+ * WQE is built, update the loop parameters
+ * and go to the next packet.
+ */
+ txq->wqe_ci += (ds + 3) / 4;
+ loc->wqe_free -= (ds + 3) / 4;
+ if (MLX5_TXOFF_CONFIG(INLINE))
+ txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
+ --loc->elts_free;
+ ++loc->pkts_sent;
+ --pkts_n;
+ if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ loc->mbuf = *pkts++;
+ if (pkts_n > 1)
+ rte_prefetch0(*pkts);
+ if (MLX5_TXOFF_CONFIG(MULTI) &&
+ unlikely(NB_SEGS(loc->mbuf) > 1))
+ return MLX5_TXCMP_CODE_MULTI;
+ if (likely(!(loc->mbuf->ol_flags & RTE_MBUF_F_TX_TCP_SEG)))
+ return MLX5_TXCMP_CODE_SINGLE;
+ /* Continue with the next TSO packet. */
+ }
+ MLX5_ASSERT(false);
+}
+
+/**
+ * Analyze the packet and select the best method to send.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ * @param newp
+ * The predefined flag whether do complete check for
+ * multi-segment packets and TSO.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
+ * MLX5_TXCMP_CODE_TSO - TSO required, use TSO/LSO.
+ * MLX5_TXCMP_CODE_SINGLE - single-segment packet, use SEND.
+ * MLX5_TXCMP_CODE_EMPW - single-segment packet, use MPW.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_able_to_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx,
+ bool newp)
+{
+ /* Check for multi-segment packet. */
+ if (newp &&
+ MLX5_TXOFF_CONFIG(MULTI) &&
+ unlikely(NB_SEGS(loc->mbuf) > 1))
+ return MLX5_TXCMP_CODE_MULTI;
+ /* Check for TSO packet. */
+ if (newp &&
+ MLX5_TXOFF_CONFIG(TSO) &&
+ unlikely(loc->mbuf->ol_flags & RTE_MBUF_F_TX_TCP_SEG))
+ return MLX5_TXCMP_CODE_TSO;
+ /* Check if eMPW is enabled at all. */
+ if (!MLX5_TXOFF_CONFIG(EMPW))
+ return MLX5_TXCMP_CODE_SINGLE;
+ /* Check if eMPW can be engaged. */
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ unlikely(loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN) &&
+ (!MLX5_TXOFF_CONFIG(INLINE) ||
+ unlikely((rte_pktmbuf_data_len(loc->mbuf) +
+ sizeof(struct rte_vlan_hdr)) > txq->inlen_empw))) {
+ /*
+ * eMPW does not support VLAN insertion offload, we have to
+ * inline the entire packet but packet is too long for inlining.
+ */
+ return MLX5_TXCMP_CODE_SINGLE;
+ }
+ return MLX5_TXCMP_CODE_EMPW;
+}
+
+/**
+ * Check the next packet attributes to match with the eMPW batch ones.
+ * In addition, for legacy MPW the packet length is checked either.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param es
+ * Pointer to Ethernet Segment of eMPW batch.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param dlen
+ * Length of previous packet in MPW descriptor.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * true - packet match with eMPW batch attributes.
+ * false - no match, eMPW should be restarted.
+ */
+static __rte_always_inline bool
+mlx5_tx_match_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_wqe_eseg *__rte_restrict es,
+ struct mlx5_txq_local *__rte_restrict loc,
+ uint32_t dlen,
+ unsigned int olx)
+{
+ uint8_t swp_flags = 0;
+
+ /* Compare the checksum flags, if any. */
+ if (MLX5_TXOFF_CONFIG(CSUM) &&
+ txq_ol_cksum_to_cs(loc->mbuf) != es->cs_flags)
+ return false;
+ /* Compare the Software Parser offsets and flags. */
+ if (MLX5_TXOFF_CONFIG(SWP) &&
+ (es->swp_offs != txq_mbuf_to_swp(loc, &swp_flags, olx) ||
+ es->swp_flags != swp_flags))
+ return false;
+ /* Fill metadata field if needed. */
+ if (MLX5_TXOFF_CONFIG(METADATA) &&
+ es->metadata != (loc->mbuf->ol_flags & RTE_MBUF_DYNFLAG_TX_METADATA ?
+ rte_cpu_to_be_32(*RTE_FLOW_DYNF_METADATA(loc->mbuf)) : 0))
+ return false;
+ /* Legacy MPW can send packets with the same length only. */
+ if (MLX5_TXOFF_CONFIG(MPW) &&
+ dlen != rte_pktmbuf_data_len(loc->mbuf))
+ return false;
+ /* There must be no VLAN packets in eMPW loop. */
+ if (MLX5_TXOFF_CONFIG(VLAN))
+ MLX5_ASSERT(!(loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN));
+ /* Check if the scheduling is requested. */
+ if (MLX5_TXOFF_CONFIG(TXPP) &&
+ loc->mbuf->ol_flags & txq->ts_mask)
+ return false;
+ return true;
+}
+
+/**
+ * Update send loop variables and WQE for eMPW loop without data inlining.
+ * Number of Data Segments is equal to the number of sent packets.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param ds
+ * Number of packets/Data Segments/Packets.
+ * @param slen
+ * Accumulated statistics, bytes sent.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * true - packet match with eMPW batch attributes.
+ * false - no match, eMPW should be restarted.
+ */
+static __rte_always_inline void
+mlx5_tx_sdone_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int ds,
+ unsigned int slen,
+ unsigned int olx __rte_unused)
+{
+ MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ txq->stats.obytes += slen;
+#else
+ (void)slen;
+#endif
+ loc->elts_free -= ds;
+ loc->pkts_sent += ds;
+ ds += 2;
+ loc->wqe_last->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
+ txq->wqe_ci += (ds + 3) / 4;
+ loc->wqe_free -= (ds + 3) / 4;
+}
+
+/**
+ * Update send loop variables and WQE for eMPW loop with data inlining.
+ * Gets the size of pushed descriptors and data to the WQE.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param len
+ * Total size of descriptor/data in bytes.
+ * @param slen
+ * Accumulated statistics, data bytes sent.
+ * @param wqem
+ * The base WQE for the eMPW/MPW descriptor.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * true - packet match with eMPW batch attributes.
+ * false - no match, eMPW should be restarted.
+ */
+static __rte_always_inline void
+mlx5_tx_idone_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int len,
+ unsigned int slen,
+ struct mlx5_wqe *__rte_restrict wqem,
+ unsigned int olx __rte_unused)
+{
+ struct mlx5_wqe_dseg *dseg = &wqem->dseg[0];
+
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ txq->stats.obytes += slen;
+#else
+ (void)slen;
+#endif
+ if (MLX5_TXOFF_CONFIG(MPW) && dseg->bcount == RTE_BE32(0)) {
+ /*
+ * If the legacy MPW session contains the inline packets
+ * we should set the only inline data segment length
+ * and align the total length to the segment size.
+ */
+ MLX5_ASSERT(len > sizeof(dseg->bcount));
+ dseg->bcount = rte_cpu_to_be_32((len - sizeof(dseg->bcount)) |
+ MLX5_ETH_WQE_DATA_INLINE);
+ len = (len + MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE + 2;
+ } else {
+ /*
+ * The session is not legacy MPW or contains the
+ * data buffer pointer segments.
+ */
+ MLX5_ASSERT((len % MLX5_WSEG_SIZE) == 0);
+ len = len / MLX5_WSEG_SIZE + 2;
+ }
+ wqem->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | len);
+ txq->wqe_ci += (len + 3) / 4;
+ loc->wqe_free -= (len + 3) / 4;
+ loc->wqe_last = wqem;
+}
+
+/**
+ * The set of Tx burst functions for single-segment packets without TSO
+ * and with Multi-Packet Writing feature support.
+ * Supports all types of Tx offloads, except multi-packets and TSO.
+ *
+ * Uses MLX5_OPCODE_EMPW to build WQEs if possible and sends as many packet
+ * per WQE as it can. If eMPW is not configured or packet can not be sent with
+ * eMPW (VLAN insertion) the ordinary SEND opcode is used and only one packet
+ * placed in WQE.
+ *
+ * Functions stop sending if it encounters the multi-segment packet or packet
+ * with TSO requested.
+ *
+ * The routines are responsible for storing processed mbuf into elts ring buffer
+ * and update elts_head if inlining offload is requested. Otherwise the copying
+ * mbufs to elts can be postponed and completed at the end of burst routine.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param[in] pkts
+ * Packets to transmit.
+ * @param pkts_n
+ * Number of packets in array.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
+ * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
+ * MLX5_TXCMP_CODE_TSO - TSO packet encountered.
+ * MLX5_TXCMP_CODE_SINGLE - used inside functions set.
+ * MLX5_TXCMP_CODE_EMPW - used inside functions set.
+ *
+ * Local context variables updated.
+ *
+ *
+ * The routine sends packets with MLX5_OPCODE_EMPW
+ * without inlining, this is dedicated optimized branch.
+ * No VLAN insertion is supported.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_burst_empw_simple(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ /*
+ * Subroutine is the part of mlx5_tx_burst_single() and sends
+ * single-segment packet with eMPW opcode without data inlining.
+ */
+ MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(EMPW));
+ MLX5_ASSERT(loc->elts_free && loc->wqe_free);
+ MLX5_ASSERT(pkts_n > loc->pkts_sent);
+ pkts += loc->pkts_sent + 1;
+ pkts_n -= loc->pkts_sent;
+ for (;;) {
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ struct mlx5_wqe_eseg *__rte_restrict eseg;
+ enum mlx5_txcmp_code ret;
+ unsigned int part, loop;
+ unsigned int slen = 0;
+
+next_empw:
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ part = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
+ MLX5_MPW_MAX_PACKETS :
+ MLX5_EMPW_MAX_PACKETS);
+ if (unlikely(loc->elts_free < part)) {
+ /* We have no enough elts to save all mbufs. */
+ if (unlikely(loc->elts_free < MLX5_EMPW_MIN_PACKETS))
+ return MLX5_TXCMP_CODE_EXIT;
+ /* But we still able to send at least minimal eMPW. */
+ part = loc->elts_free;
+ }
+ /* Check whether we have enough WQEs */
+ if (unlikely(loc->wqe_free < ((2 + part + 3) / 4))) {
+ if (unlikely(loc->wqe_free <
+ ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
+ return MLX5_TXCMP_CODE_EXIT;
+ part = (loc->wqe_free * 4) - 2;
+ }
+ if (likely(part > 1))
+ rte_prefetch0(*pkts);
+ loc->wqe_last = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ /*
+ * Build eMPW title WQEBB:
+ * - Control Segment, eMPW opcode
+ * - Ethernet Segment, no inline
+ */
+ mlx5_tx_cseg_init(txq, loc, loc->wqe_last, part + 2,
+ MLX5_OPCODE_ENHANCED_MPSW, olx);
+ mlx5_tx_eseg_none(txq, loc, loc->wqe_last,
+ olx & ~MLX5_TXOFF_CONFIG_VLAN);
+ eseg = &loc->wqe_last->eseg;
+ dseg = &loc->wqe_last->dseg[0];
+ loop = part;
+ /* Store the packet length for legacy MPW. */
+ if (MLX5_TXOFF_CONFIG(MPW))
+ eseg->mss = rte_cpu_to_be_16
+ (rte_pktmbuf_data_len(loc->mbuf));
+ for (;;) {
+ uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ slen += dlen;
+#endif
+ mlx5_tx_dseg_ptr
+ (txq, loc, dseg,
+ rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
+ dlen, olx);
+ if (unlikely(--loop == 0))
+ break;
+ loc->mbuf = *pkts++;
+ if (likely(loop > 1))
+ rte_prefetch0(*pkts);
+ ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
+ /*
+ * Unroll the completion code to avoid
+ * returning variable value - it results in
+ * unoptimized sequent checking in caller.
+ */
+ if (ret == MLX5_TXCMP_CODE_MULTI) {
+ part -= loop;
+ mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ return MLX5_TXCMP_CODE_MULTI;
+ }
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (ret == MLX5_TXCMP_CODE_TSO) {
+ part -= loop;
+ mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ return MLX5_TXCMP_CODE_TSO;
+ }
+ if (ret == MLX5_TXCMP_CODE_SINGLE) {
+ part -= loop;
+ mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ return MLX5_TXCMP_CODE_SINGLE;
+ }
+ if (ret != MLX5_TXCMP_CODE_EMPW) {
+ MLX5_ASSERT(false);
+ part -= loop;
+ mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ /*
+ * Check whether packet parameters coincide
+ * within assumed eMPW batch:
+ * - check sum settings
+ * - metadata value
+ * - software parser settings
+ * - packets length (legacy MPW only)
+ * - scheduling is not required
+ */
+ if (!mlx5_tx_match_empw(txq, eseg, loc, dlen, olx)) {
+ MLX5_ASSERT(loop);
+ part -= loop;
+ mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ pkts_n -= part;
+ goto next_empw;
+ }
+ /* Packet attributes match, continue the same eMPW. */
+ ++dseg;
+ if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
+ dseg = (struct mlx5_wqe_dseg *)txq->wqes;
+ }
+ /* eMPW is built successfully, update loop parameters. */
+ MLX5_ASSERT(!loop);
+ MLX5_ASSERT(pkts_n >= part);
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ txq->stats.obytes += slen;
+#endif
+ loc->elts_free -= part;
+ loc->pkts_sent += part;
+ txq->wqe_ci += (2 + part + 3) / 4;
+ loc->wqe_free -= (2 + part + 3) / 4;
+ pkts_n -= part;
+ if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ loc->mbuf = *pkts++;
+ ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
+ if (unlikely(ret != MLX5_TXCMP_CODE_EMPW))
+ return ret;
+ /* Continue sending eMPW batches. */
+ }
+ MLX5_ASSERT(false);
+}
+
+/**
+ * The routine sends packets with MLX5_OPCODE_EMPW
+ * with inlining, optionally supports VLAN insertion.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_burst_empw_inline(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ /*
+ * Subroutine is the part of mlx5_tx_burst_single() and sends
+ * single-segment packet with eMPW opcode with data inlining.
+ */
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(EMPW));
+ MLX5_ASSERT(loc->elts_free && loc->wqe_free);
+ MLX5_ASSERT(pkts_n > loc->pkts_sent);
+ pkts += loc->pkts_sent + 1;
+ pkts_n -= loc->pkts_sent;
+ for (;;) {
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ struct mlx5_wqe *__rte_restrict wqem;
+ enum mlx5_txcmp_code ret;
+ unsigned int room, part, nlim;
+ unsigned int slen = 0;
+
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ /*
+ * Limits the amount of packets in one WQE
+ * to improve CQE latency generation.
+ */
+ nlim = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
+ MLX5_MPW_INLINE_MAX_PACKETS :
+ MLX5_EMPW_MAX_PACKETS);
+ /* Check whether we have minimal amount WQEs */
+ if (unlikely(loc->wqe_free <
+ ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
+ return MLX5_TXCMP_CODE_EXIT;
+ if (likely(pkts_n > 1))
+ rte_prefetch0(*pkts);
+ wqem = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ /*
+ * Build eMPW title WQEBB:
+ * - Control Segment, eMPW opcode, zero DS
+ * - Ethernet Segment, no inline
+ */
+ mlx5_tx_cseg_init(txq, loc, wqem, 0,
+ MLX5_OPCODE_ENHANCED_MPSW, olx);
+ mlx5_tx_eseg_none(txq, loc, wqem,
+ olx & ~MLX5_TXOFF_CONFIG_VLAN);
+ dseg = &wqem->dseg[0];
+ /* Store the packet length for legacy MPW. */
+ if (MLX5_TXOFF_CONFIG(MPW))
+ wqem->eseg.mss = rte_cpu_to_be_16
+ (rte_pktmbuf_data_len(loc->mbuf));
+ room = RTE_MIN(MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE,
+ loc->wqe_free) * MLX5_WQE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE;
+ /* Limit the room for legacy MPW sessions for performance. */
+ if (MLX5_TXOFF_CONFIG(MPW))
+ room = RTE_MIN(room,
+ RTE_MAX(txq->inlen_empw +
+ sizeof(dseg->bcount) +
+ (MLX5_TXOFF_CONFIG(VLAN) ?
+ sizeof(struct rte_vlan_hdr) : 0),
+ MLX5_MPW_INLINE_MAX_PACKETS *
+ MLX5_WQE_DSEG_SIZE));
+ /* Build WQE till we have space, packets and resources. */
+ part = room;
+ for (;;) {
+ uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
+ uint8_t *dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
+ unsigned int tlen;
+
+ MLX5_ASSERT(room >= MLX5_WQE_DSEG_SIZE);
+ MLX5_ASSERT((room % MLX5_WQE_DSEG_SIZE) == 0);
+ MLX5_ASSERT((uintptr_t)dseg < (uintptr_t)txq->wqes_end);
+ /*
+ * Some Tx offloads may cause an error if packet is not
+ * long enough, check against assumed minimal length.
+ */
+ if (unlikely(dlen <= MLX5_ESEG_MIN_INLINE_SIZE)) {
+ part -= room;
+ if (unlikely(!part))
+ return MLX5_TXCMP_CODE_ERROR;
+ /*
+ * We have some successfully built
+ * packet Data Segments to send.
+ */
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ /* Inline or not inline - that's the Question. */
+ if (dlen > txq->inlen_empw ||
+ loc->mbuf->ol_flags & RTE_MBUF_F_TX_DYNF_NOINLINE)
+ goto pointer_empw;
+ if (MLX5_TXOFF_CONFIG(MPW)) {
+ if (dlen > txq->inlen_send)
+ goto pointer_empw;
+ tlen = dlen;
+ if (part == room) {
+ /* Open new inline MPW session. */
+ tlen += sizeof(dseg->bcount);
+ dseg->bcount = RTE_BE32(0);
+ dseg = RTE_PTR_ADD
+ (dseg, sizeof(dseg->bcount));
+ } else {
+ /*
+ * No pointer and inline descriptor
+ * intermix for legacy MPW sessions.
+ */
+ if (wqem->dseg[0].bcount)
+ break;
+ }
+ } else {
+ tlen = sizeof(dseg->bcount) + dlen;
+ }
+ /* Inline entire packet, optional VLAN insertion. */
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN) {
+ /*
+ * The packet length must be checked in
+ * mlx5_tx_able_to_empw() and packet
+ * fits into inline length guaranteed.
+ */
+ MLX5_ASSERT((dlen +
+ sizeof(struct rte_vlan_hdr)) <=
+ txq->inlen_empw);
+ tlen += sizeof(struct rte_vlan_hdr);
+ if (room < tlen)
+ break;
+ dseg = mlx5_tx_dseg_vlan(txq, loc, dseg,
+ dptr, dlen, olx);
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ slen += sizeof(struct rte_vlan_hdr);
+#endif
+ } else {
+ if (room < tlen)
+ break;
+ dseg = mlx5_tx_dseg_empw(txq, loc, dseg,
+ dptr, dlen, olx);
+ }
+ if (!MLX5_TXOFF_CONFIG(MPW))
+ tlen = RTE_ALIGN(tlen, MLX5_WSEG_SIZE);
+ MLX5_ASSERT(room >= tlen);
+ room -= tlen;
+ /*
+ * Packet data are completely inline,
+ * we can try to free the packet.
+ */
+ if (likely(loc->pkts_sent == loc->mbuf_free)) {
+ /*
+ * All the packets from the burst beginning
+ * are inline, we can free mbufs directly
+ * from the origin array on tx_burst exit().
+ */
+ loc->mbuf_free++;
+ goto next_mbuf;
+ }
+ /*
+ * In order no to call rte_pktmbuf_free_seg() here,
+ * in the most inner loop (that might be very
+ * expensive) we just save the mbuf in elts.
+ */
+ txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
+ loc->elts_free--;
+ goto next_mbuf;
+pointer_empw:
+ /*
+ * No pointer and inline descriptor
+ * intermix for legacy MPW sessions.
+ */
+ if (MLX5_TXOFF_CONFIG(MPW) &&
+ part != room &&
+ wqem->dseg[0].bcount == RTE_BE32(0))
+ break;
+ /*
+ * Not inlinable VLAN packets are
+ * proceeded outside of this routine.
+ */
+ MLX5_ASSERT(room >= MLX5_WQE_DSEG_SIZE);
+ if (MLX5_TXOFF_CONFIG(VLAN))
+ MLX5_ASSERT(!(loc->mbuf->ol_flags &
+ RTE_MBUF_F_TX_VLAN));
+ mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
+ /* We have to store mbuf in elts.*/
+ txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
+ loc->elts_free--;
+ room -= MLX5_WQE_DSEG_SIZE;
+ /* Ring buffer wraparound is checked at the loop end.*/
+ ++dseg;
+next_mbuf:
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ slen += dlen;
+#endif
+ loc->pkts_sent++;
+ pkts_n--;
+ if (unlikely(!pkts_n || !loc->elts_free)) {
+ /*
+ * We have no resources/packets to
+ * continue build descriptors.
+ */
+ part -= room;
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
+ return MLX5_TXCMP_CODE_EXIT;
+ }
+ loc->mbuf = *pkts++;
+ if (likely(pkts_n > 1))
+ rte_prefetch0(*pkts);
+ ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
+ /*
+ * Unroll the completion code to avoid
+ * returning variable value - it results in
+ * unoptimized sequent checking in caller.
+ */
+ if (ret == MLX5_TXCMP_CODE_MULTI) {
+ part -= room;
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ return MLX5_TXCMP_CODE_MULTI;
+ }
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (ret == MLX5_TXCMP_CODE_TSO) {
+ part -= room;
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ return MLX5_TXCMP_CODE_TSO;
+ }
+ if (ret == MLX5_TXCMP_CODE_SINGLE) {
+ part -= room;
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ return MLX5_TXCMP_CODE_SINGLE;
+ }
+ if (ret != MLX5_TXCMP_CODE_EMPW) {
+ MLX5_ASSERT(false);
+ part -= room;
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ /* Check if we have minimal room left. */
+ nlim--;
+ if (unlikely(!nlim || room < MLX5_WQE_DSEG_SIZE))
+ break;
+ /*
+ * Check whether packet parameters coincide
+ * within assumed eMPW batch:
+ * - check sum settings
+ * - metadata value
+ * - software parser settings
+ * - packets length (legacy MPW only)
+ * - scheduling is not required
+ */
+ if (!mlx5_tx_match_empw(txq, &wqem->eseg,
+ loc, dlen, olx))
+ break;
+ /* Packet attributes match, continue the same eMPW. */
+ if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
+ dseg = (struct mlx5_wqe_dseg *)txq->wqes;
+ }
+ /*
+ * We get here to close an existing eMPW
+ * session and start the new one.
+ */
+ MLX5_ASSERT(pkts_n);
+ part -= room;
+ if (unlikely(!part))
+ return MLX5_TXCMP_CODE_EXIT;
+ mlx5_tx_idone_empw(txq, loc, part, slen, wqem, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ /* Continue the loop with new eMPW session. */
+ }
+ MLX5_ASSERT(false);
+}
+
+/**
+ * The routine sends packets with ordinary MLX5_OPCODE_SEND.
+ * Data inlining and VLAN insertion are supported.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_burst_single_send(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ /*
+ * Subroutine is the part of mlx5_tx_burst_single()
+ * and sends single-segment packet with SEND opcode.
+ */
+ MLX5_ASSERT(loc->elts_free && loc->wqe_free);
+ MLX5_ASSERT(pkts_n > loc->pkts_sent);
+ pkts += loc->pkts_sent + 1;
+ pkts_n -= loc->pkts_sent;
+ for (;;) {
+ struct mlx5_wqe *__rte_restrict wqe;
+ enum mlx5_txcmp_code ret;
+
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ if (MLX5_TXOFF_CONFIG(INLINE)) {
+ unsigned int inlen, vlan = 0;
+
+ inlen = rte_pktmbuf_data_len(loc->mbuf);
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN) {
+ vlan = sizeof(struct rte_vlan_hdr);
+ inlen += vlan;
+ }
+ /*
+ * If inlining is enabled at configuration time
+ * the limit must be not less than minimal size.
+ * Otherwise we would do extra check for data
+ * size to avoid crashes due to length overflow.
+ */
+ MLX5_ASSERT(txq->inlen_send >=
+ MLX5_ESEG_MIN_INLINE_SIZE);
+ if (inlen <= txq->inlen_send) {
+ unsigned int seg_n, wqe_n;
+
+ rte_prefetch0(rte_pktmbuf_mtod
+ (loc->mbuf, uint8_t *));
+ /* Check against minimal length. */
+ if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
+ return MLX5_TXCMP_CODE_ERROR;
+ if (loc->mbuf->ol_flags &
+ RTE_MBUF_F_TX_DYNF_NOINLINE) {
+ /*
+ * The hint flag not to inline packet
+ * data is set. Check whether we can
+ * follow the hint.
+ */
+ if ((!MLX5_TXOFF_CONFIG(EMPW) &&
+ txq->inlen_mode) ||
+ (MLX5_TXOFF_CONFIG(MPW) &&
+ txq->inlen_mode)) {
+ if (inlen <= txq->inlen_send)
+ goto single_inline;
+ /*
+ * The hardware requires the
+ * minimal inline data header.
+ */
+ goto single_min_inline;
+ }
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ vlan && !txq->vlan_en) {
+ /*
+ * We must insert VLAN tag
+ * by software means.
+ */
+ goto single_part_inline;
+ }
+ goto single_no_inline;
+ }
+single_inline:
+ /*
+ * Completely inlined packet data WQE:
+ * - Control Segment, SEND opcode
+ * - Ethernet Segment, no VLAN insertion
+ * - Data inlined, VLAN optionally inserted
+ * - Alignment to MLX5_WSEG_SIZE
+ * Have to estimate amount of WQEBBs
+ */
+ seg_n = (inlen + 3 * MLX5_WSEG_SIZE -
+ MLX5_ESEG_MIN_INLINE_SIZE +
+ MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
+ /* Check if there are enough WQEBBs. */
+ wqe_n = (seg_n + 3) / 4;
+ if (wqe_n > loc->wqe_free)
+ return MLX5_TXCMP_CODE_EXIT;
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, seg_n,
+ MLX5_OPCODE_SEND, olx);
+ mlx5_tx_eseg_data(txq, loc, wqe,
+ vlan, inlen, 0, olx);
+ txq->wqe_ci += wqe_n;
+ loc->wqe_free -= wqe_n;
+ /*
+ * Packet data are completely inlined,
+ * free the packet immediately.
+ */
+ rte_pktmbuf_free_seg(loc->mbuf);
+ } else if ((!MLX5_TXOFF_CONFIG(EMPW) ||
+ MLX5_TXOFF_CONFIG(MPW)) &&
+ txq->inlen_mode) {
+ /*
+ * If minimal inlining is requested the eMPW
+ * feature should be disabled due to data is
+ * inlined into Ethernet Segment, which can
+ * not contain inlined data for eMPW due to
+ * segment shared for all packets.
+ */
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ unsigned int ds;
+ uint8_t *dptr;
+
+ /*
+ * The inline-mode settings require
+ * to inline the specified amount of
+ * data bytes to the Ethernet Segment.
+ * We should check the free space in
+ * WQE ring buffer to inline partially.
+ */
+single_min_inline:
+ MLX5_ASSERT(txq->inlen_send >= txq->inlen_mode);
+ MLX5_ASSERT(inlen > txq->inlen_mode);
+ MLX5_ASSERT(txq->inlen_mode >=
+ MLX5_ESEG_MIN_INLINE_SIZE);
+ /*
+ * Check whether there are enough free WQEBBs:
+ * - Control Segment
+ * - Ethernet Segment
+ * - First Segment of inlined Ethernet data
+ * - ... data continued ...
+ * - Finishing Data Segment of pointer type
+ */
+ ds = (MLX5_WQE_CSEG_SIZE +
+ MLX5_WQE_ESEG_SIZE +
+ MLX5_WQE_DSEG_SIZE +
+ txq->inlen_mode -
+ MLX5_ESEG_MIN_INLINE_SIZE +
+ MLX5_WQE_DSEG_SIZE +
+ MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
+ if (loc->wqe_free < ((ds + 3) / 4))
+ return MLX5_TXCMP_CODE_EXIT;
+ /*
+ * Build the ordinary SEND WQE:
+ * - Control Segment
+ * - Ethernet Segment, inline inlen_mode bytes
+ * - Data Segment of pointer type
+ */
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, ds,
+ MLX5_OPCODE_SEND, olx);
+ dseg = mlx5_tx_eseg_data(txq, loc, wqe, vlan,
+ txq->inlen_mode,
+ 0, olx);
+ dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) +
+ txq->inlen_mode - vlan;
+ inlen -= txq->inlen_mode;
+ mlx5_tx_dseg_ptr(txq, loc, dseg,
+ dptr, inlen, olx);
+ /*
+ * WQE is built, update the loop parameters
+ * and got to the next packet.
+ */
+ txq->wqe_ci += (ds + 3) / 4;
+ loc->wqe_free -= (ds + 3) / 4;
+ /* We have to store mbuf in elts.*/
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
+ txq->elts[txq->elts_head++ & txq->elts_m] =
+ loc->mbuf;
+ --loc->elts_free;
+ } else {
+ uint8_t *dptr;
+ unsigned int dlen;
+
+ /*
+ * Partially inlined packet data WQE, we have
+ * some space in title WQEBB, we can fill it
+ * with some packet data. It takes one WQEBB,
+ * it is available, no extra space check:
+ * - Control Segment, SEND opcode
+ * - Ethernet Segment, no VLAN insertion
+ * - MLX5_ESEG_MIN_INLINE_SIZE bytes of Data
+ * - Data Segment, pointer type
+ *
+ * We also get here if VLAN insertion is not
+ * supported by HW, the inline is enabled.
+ */
+single_part_inline:
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, 4,
+ MLX5_OPCODE_SEND, olx);
+ mlx5_tx_eseg_dmin(txq, loc, wqe, vlan, olx);
+ dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) +
+ MLX5_ESEG_MIN_INLINE_SIZE - vlan;
+ /*
+ * The length check is performed above, by
+ * comparing with txq->inlen_send. We should
+ * not get overflow here.
+ */
+ MLX5_ASSERT(inlen > MLX5_ESEG_MIN_INLINE_SIZE);
+ dlen = inlen - MLX5_ESEG_MIN_INLINE_SIZE;
+ mlx5_tx_dseg_ptr(txq, loc, &wqe->dseg[1],
+ dptr, dlen, olx);
+ ++txq->wqe_ci;
+ --loc->wqe_free;
+ /* We have to store mbuf in elts.*/
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
+ txq->elts[txq->elts_head++ & txq->elts_m] =
+ loc->mbuf;
+ --loc->elts_free;
+ }
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ txq->stats.obytes += vlan +
+ rte_pktmbuf_data_len(loc->mbuf);
+#endif
+ } else {
+ /*
+ * No inline at all, it means the CPU cycles saving
+ * is prioritized at configuration, we should not
+ * copy any packet data to WQE.
+ *
+ * SEND WQE, one WQEBB:
+ * - Control Segment, SEND opcode
+ * - Ethernet Segment, optional VLAN, no inline
+ * - Data Segment, pointer type
+ */
+single_no_inline:
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, 3,
+ MLX5_OPCODE_SEND, olx);
+ mlx5_tx_eseg_none(txq, loc, wqe, olx);
+ mlx5_tx_dseg_ptr
+ (txq, loc, &wqe->dseg[0],
+ rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
+ rte_pktmbuf_data_len(loc->mbuf), olx);
+ ++txq->wqe_ci;
+ --loc->wqe_free;
+ /*
+ * We should not store mbuf pointer in elts
+ * if no inlining is configured, this is done
+ * by calling routine in a batch copy.
+ */
+ MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
+ --loc->elts_free;
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ txq->stats.obytes += rte_pktmbuf_data_len(loc->mbuf);
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN)
+ txq->stats.obytes +=
+ sizeof(struct rte_vlan_hdr);
+#endif
+ }
+ ++loc->pkts_sent;
+ --pkts_n;
+ if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ loc->mbuf = *pkts++;
+ if (pkts_n > 1)
+ rte_prefetch0(*pkts);
+ ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
+ if (unlikely(ret != MLX5_TXCMP_CODE_SINGLE))
+ return ret;
+ }
+ MLX5_ASSERT(false);
+}
+
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_burst_single(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ enum mlx5_txcmp_code ret;
+
+ ret = mlx5_tx_able_to_empw(txq, loc, olx, false);
+ if (ret == MLX5_TXCMP_CODE_SINGLE)
+ goto ordinary_send;
+ MLX5_ASSERT(ret == MLX5_TXCMP_CODE_EMPW);
+ for (;;) {
+ /* Optimize for inline/no inline eMPW send. */
+ ret = (MLX5_TXOFF_CONFIG(INLINE)) ?
+ mlx5_tx_burst_empw_inline
+ (txq, pkts, pkts_n, loc, olx) :
+ mlx5_tx_burst_empw_simple
+ (txq, pkts, pkts_n, loc, olx);
+ if (ret != MLX5_TXCMP_CODE_SINGLE)
+ return ret;
+ /* The resources to send one packet should remain. */
+ MLX5_ASSERT(loc->elts_free && loc->wqe_free);
+ordinary_send:
+ ret = mlx5_tx_burst_single_send(txq, pkts, pkts_n, loc, olx);
+ MLX5_ASSERT(ret != MLX5_TXCMP_CODE_SINGLE);
+ if (ret != MLX5_TXCMP_CODE_EMPW)
+ return ret;
+ /* The resources to send one packet should remain. */
+ MLX5_ASSERT(loc->elts_free && loc->wqe_free);
+ }
+}
+
+/**
+ * DPDK Tx callback template. This is configured template used to generate
+ * routines optimized for specified offload setup.
+ * One of this generated functions is chosen at SQ configuration time.
+ *
+ * @param txq
+ * Generic pointer to TX queue structure.
+ * @param[in] pkts
+ * Packets to transmit.
+ * @param pkts_n
+ * Number of packets in array.
+ * @param olx
+ * Configured offloads mask, presents the bits of MLX5_TXOFF_CONFIG_xxx
+ * values. Should be static to take compile time static configuration
+ * advantages.
+ *
+ * @return
+ * Number of packets successfully transmitted (<= pkts_n).
+ */
+static __rte_always_inline uint16_t
+mlx5_tx_burst_tmpl(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ uint16_t pkts_n,
+ unsigned int olx)
+{
+ struct mlx5_txq_local loc;
+ enum mlx5_txcmp_code ret;
+ unsigned int part;
+
+ MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
+ MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
+ if (unlikely(!pkts_n))
+ return 0;
+ if (MLX5_TXOFF_CONFIG(INLINE))
+ loc.mbuf_free = 0;
+ loc.pkts_sent = 0;
+ loc.pkts_copy = 0;
+ loc.wqe_last = NULL;
+
+send_loop:
+ loc.pkts_loop = loc.pkts_sent;
+ /*
+ * Check if there are some CQEs, if any:
+ * - process an encountered errors
+ * - process the completed WQEs
+ * - free related mbufs
+ * - doorbell the NIC about processed CQEs
+ */
+ rte_prefetch0(*(pkts + loc.pkts_sent));
+ mlx5_tx_handle_completion(txq, olx);
+ /*
+ * Calculate the number of available resources - elts and WQEs.
+ * There are two possible different scenarios:
+ * - no data inlining into WQEs, one WQEBB may contains up to
+ * four packets, in this case elts become scarce resource
+ * - data inlining into WQEs, one packet may require multiple
+ * WQEBBs, the WQEs become the limiting factor.
+ */
+ MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
+ loc.elts_free = txq->elts_s -
+ (uint16_t)(txq->elts_head - txq->elts_tail);
+ MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
+ loc.wqe_free = txq->wqe_s -
+ (uint16_t)(txq->wqe_ci - txq->wqe_pi);
+ if (unlikely(!loc.elts_free || !loc.wqe_free))
+ goto burst_exit;
+ for (;;) {
+ /*
+ * Fetch the packet from array. Usually this is the first
+ * packet in series of multi/single segment packets.
+ */
+ loc.mbuf = *(pkts + loc.pkts_sent);
+ /* Dedicated branch for multi-segment packets. */
+ if (MLX5_TXOFF_CONFIG(MULTI) &&
+ unlikely(NB_SEGS(loc.mbuf) > 1)) {
+ /*
+ * Multi-segment packet encountered.
+ * Hardware is able to process it only
+ * with SEND/TSO opcodes, one packet
+ * per WQE, do it in dedicated routine.
+ */
+enter_send_multi:
+ MLX5_ASSERT(loc.pkts_sent >= loc.pkts_copy);
+ part = loc.pkts_sent - loc.pkts_copy;
+ if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
+ /*
+ * There are some single-segment mbufs not
+ * stored in elts. The mbufs must be in the
+ * same order as WQEs, so we must copy the
+ * mbufs to elts here, before the coming
+ * multi-segment packet mbufs is appended.
+ */
+ mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy,
+ part, olx);
+ loc.pkts_copy = loc.pkts_sent;
+ }
+ MLX5_ASSERT(pkts_n > loc.pkts_sent);
+ ret = mlx5_tx_burst_mseg(txq, pkts, pkts_n, &loc, olx);
+ if (!MLX5_TXOFF_CONFIG(INLINE))
+ loc.pkts_copy = loc.pkts_sent;
+ /*
+ * These returned code checks are supposed
+ * to be optimized out due to routine inlining.
+ */
+ if (ret == MLX5_TXCMP_CODE_EXIT) {
+ /*
+ * The routine returns this code when
+ * all packets are sent or there is no
+ * enough resources to complete request.
+ */
+ break;
+ }
+ if (ret == MLX5_TXCMP_CODE_ERROR) {
+ /*
+ * The routine returns this code when some error
+ * in the incoming packets format occurred.
+ */
+ txq->stats.oerrors++;
+ break;
+ }
+ if (ret == MLX5_TXCMP_CODE_SINGLE) {
+ /*
+ * The single-segment packet was encountered
+ * in the array, try to send it with the
+ * best optimized way, possible engaging eMPW.
+ */
+ goto enter_send_single;
+ }
+ if (MLX5_TXOFF_CONFIG(TSO) &&
+ ret == MLX5_TXCMP_CODE_TSO) {
+ /*
+ * The single-segment TSO packet was
+ * encountered in the array.
+ */
+ goto enter_send_tso;
+ }
+ /* We must not get here. Something is going wrong. */
+ MLX5_ASSERT(false);
+ txq->stats.oerrors++;
+ break;
+ }
+ /* Dedicated branch for single-segment TSO packets. */
+ if (MLX5_TXOFF_CONFIG(TSO) &&
+ unlikely(loc.mbuf->ol_flags & RTE_MBUF_F_TX_TCP_SEG)) {
+ /*
+ * TSO might require special way for inlining
+ * (dedicated parameters) and is sent with
+ * MLX5_OPCODE_TSO opcode only, provide this
+ * in dedicated branch.
+ */
+enter_send_tso:
+ MLX5_ASSERT(NB_SEGS(loc.mbuf) == 1);
+ MLX5_ASSERT(pkts_n > loc.pkts_sent);
+ ret = mlx5_tx_burst_tso(txq, pkts, pkts_n, &loc, olx);
+ /*
+ * These returned code checks are supposed
+ * to be optimized out due to routine inlining.
+ */
+ if (ret == MLX5_TXCMP_CODE_EXIT)
+ break;
+ if (ret == MLX5_TXCMP_CODE_ERROR) {
+ txq->stats.oerrors++;
+ break;
+ }
+ if (ret == MLX5_TXCMP_CODE_SINGLE)
+ goto enter_send_single;
+ if (MLX5_TXOFF_CONFIG(MULTI) &&
+ ret == MLX5_TXCMP_CODE_MULTI) {
+ /*
+ * The multi-segment packet was
+ * encountered in the array.
+ */
+ goto enter_send_multi;
+ }
+ /* We must not get here. Something is going wrong. */
+ MLX5_ASSERT(false);
+ txq->stats.oerrors++;
+ break;
+ }
+ /*
+ * The dedicated branch for the single-segment packets
+ * without TSO. Often these ones can be sent using
+ * MLX5_OPCODE_EMPW with multiple packets in one WQE.
+ * The routine builds the WQEs till it encounters
+ * the TSO or multi-segment packet (in case if these
+ * offloads are requested at SQ configuration time).
+ */
+enter_send_single:
+ MLX5_ASSERT(pkts_n > loc.pkts_sent);
+ ret = mlx5_tx_burst_single(txq, pkts, pkts_n, &loc, olx);
+ /*
+ * These returned code checks are supposed
+ * to be optimized out due to routine inlining.
+ */
+ if (ret == MLX5_TXCMP_CODE_EXIT)
+ break;
+ if (ret == MLX5_TXCMP_CODE_ERROR) {
+ txq->stats.oerrors++;
+ break;
+ }
+ if (MLX5_TXOFF_CONFIG(MULTI) &&
+ ret == MLX5_TXCMP_CODE_MULTI) {
+ /*
+ * The multi-segment packet was
+ * encountered in the array.
+ */
+ goto enter_send_multi;
+ }
+ if (MLX5_TXOFF_CONFIG(TSO) &&
+ ret == MLX5_TXCMP_CODE_TSO) {
+ /*
+ * The single-segment TSO packet was
+ * encountered in the array.
+ */
+ goto enter_send_tso;
+ }
+ /* We must not get here. Something is going wrong. */
+ MLX5_ASSERT(false);
+ txq->stats.oerrors++;
+ break;
+ }
+ /*
+ * Main Tx loop is completed, do the rest:
+ * - set completion request if thresholds are reached
+ * - doorbell the hardware
+ * - copy the rest of mbufs to elts (if any)
+ */
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE) ||
+ loc.pkts_sent >= loc.pkts_copy);
+ /* Take a shortcut if nothing is sent. */
+ if (unlikely(loc.pkts_sent == loc.pkts_loop))
+ goto burst_exit;
+ /* Request CQE generation if limits are reached. */
+ mlx5_tx_request_completion(txq, &loc, olx);
+ /*
+ * Ring QP doorbell immediately after WQE building completion
+ * to improve latencies. The pure software related data treatment
+ * can be completed after doorbell. Tx CQEs for this SQ are
+ * processed in this thread only by the polling.
+ *
+ * The rdma core library can map doorbell register in two ways,
+ * depending on the environment variable "MLX5_SHUT_UP_BF":
+ *
+ * - as regular cached memory, the variable is either missing or
+ * set to zero. This type of mapping may cause the significant
+ * doorbell register writing latency and requires explicit memory
+ * write barrier to mitigate this issue and prevent write combining.
+ *
+ * - as non-cached memory, the variable is present and set to not "0"
+ * value. This type of mapping may cause performance impact under
+ * heavy loading conditions but the explicit write memory barrier is
+ * not required and it may improve core performance.
+ *
+ * - the legacy behaviour (prior 19.08 release) was to use some
+ * heuristics to decide whether write memory barrier should
+ * be performed. This behavior is supported with specifying
+ * tx_db_nc=2, write barrier is skipped if application provides
+ * the full recommended burst of packets, it supposes the next
+ * packets are coming and the write barrier will be issued on
+ * the next burst (after descriptor writing, at least).
+ */
+ mlx5_doorbell_ring(mlx5_tx_bfreg(txq),
+ *(volatile uint64_t *)loc.wqe_last, txq->wqe_ci,
+ txq->qp_db, !txq->db_nc &&
+ (!txq->db_heu || pkts_n % MLX5_TX_DEFAULT_BURST));
+ /* Not all of the mbufs may be stored into elts yet. */
+ part = MLX5_TXOFF_CONFIG(INLINE) ? 0 : loc.pkts_sent - loc.pkts_copy;
+ if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
+ /*
+ * There are some single-segment mbufs not stored in elts.
+ * It can be only if the last packet was single-segment.
+ * The copying is gathered into one place due to it is
+ * a good opportunity to optimize that with SIMD.
+ * Unfortunately if inlining is enabled the gaps in pointer
+ * array may happen due to early freeing of the inlined mbufs.
+ */
+ mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy, part, olx);
+ loc.pkts_copy = loc.pkts_sent;
+ }
+ MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
+ MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
+ if (pkts_n > loc.pkts_sent) {
+ /*
+ * If burst size is large there might be no enough CQE
+ * fetched from completion queue and no enough resources
+ * freed to send all the packets.
+ */
+ goto send_loop;
+ }
+burst_exit:
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Increment sent packets counter. */
+ txq->stats.opackets += loc.pkts_sent;
+#endif
+ if (MLX5_TXOFF_CONFIG(INLINE) && loc.mbuf_free)
+ __mlx5_tx_free_mbuf(txq, pkts, loc.mbuf_free, olx);
+ return loc.pkts_sent;
+}
+
#endif /* RTE_PMD_MLX5_TX_H_ */