return offloads;
}
+/* Fetches and drops all SW-owned and error CQEs to synchronize CQ. */
+static void
+txq_sync_cq(struct mlx5_txq_data *txq)
+{
+ volatile struct mlx5_cqe *cqe;
+ int ret, i;
+
+ i = txq->cqe_s;
+ do {
+ cqe = &txq->cqes[txq->cq_ci & txq->cqe_m];
+ ret = check_cqe(cqe, txq->cqe_s, txq->cq_ci);
+ if (unlikely(ret != MLX5_CQE_STATUS_SW_OWN)) {
+ if (likely(ret != MLX5_CQE_STATUS_ERR)) {
+ /* No new CQEs in completion queue. */
+ MLX5_ASSERT(ret == MLX5_CQE_STATUS_HW_OWN);
+ break;
+ }
+ }
+ ++txq->cq_ci;
+ } while (--i);
+ /* Move all CQEs to HW ownership. */
+ for (i = 0; i < txq->cqe_s; i++) {
+ cqe = &txq->cqes[i];
+ cqe->op_own = MLX5_CQE_INVALIDATE;
+ }
+ /* Resync CQE and WQE (WQ in reset state). */
+ rte_cio_wmb();
+ *txq->cq_db = rte_cpu_to_be_32(txq->cq_ci);
+ rte_cio_wmb();
+}
+
+/**
+ * Tx queue stop. Device queue goes to the idle state,
+ * all involved mbufs are freed from elts/WQ.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * Tx queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_queue_stop_primary(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+ int ret;
+
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
+ /* Move QP to RESET state. */
+ if (txq_ctrl->obj->type == MLX5_TXQ_OBJ_TYPE_DEVX_SQ) {
+ struct mlx5_devx_modify_sq_attr msq_attr = { 0 };
+
+ /* Change queue state to reset with DevX. */
+ msq_attr.sq_state = MLX5_SQC_STATE_RDY;
+ msq_attr.state = MLX5_SQC_STATE_RST;
+ ret = mlx5_devx_cmd_modify_sq(txq_ctrl->obj->sq_devx,
+ &msq_attr);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change the "
+ "Tx QP state to RESET %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ } else {
+ struct ibv_qp_attr mod = {
+ .qp_state = IBV_QPS_RESET,
+ .port_num = (uint8_t)priv->dev_port,
+ };
+ struct ibv_qp *qp = txq_ctrl->obj->qp;
+
+ /* Change queue state to reset with Verbs. */
+ ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change the Tx QP state to RESET "
+ "%s", strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ }
+ /* Handle all send completions. */
+ txq_sync_cq(txq);
+ /* Free elts stored in the SQ. */
+ txq_free_elts(txq_ctrl);
+ /* Prevent writing new pkts to SQ by setting no free WQE.*/
+ txq->wqe_ci = txq->wqe_s;
+ txq->wqe_pi = 0;
+ txq->elts_comp = 0;
+ /* Set the actual queue state. */
+ dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STOPPED;
+ return 0;
+}
+
+/**
+ * Tx queue stop. Device queue goes to the idle state,
+ * all involved mbufs are freed from elts/WQ.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * Tx queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_queue_stop(struct rte_eth_dev *dev, uint16_t idx)
+{
+ int ret;
+
+ if (dev->data->tx_queue_state[idx] == RTE_ETH_QUEUE_STATE_HAIRPIN) {
+ DRV_LOG(ERR, "Hairpin queue can't be stopped");
+ rte_errno = EINVAL;
+ return -EINVAL;
+ }
+ if (dev->data->tx_queue_state[idx] == RTE_ETH_QUEUE_STATE_STOPPED)
+ return 0;
+ if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+ ret = mlx5_mp_os_req_queue_control(dev, idx,
+ MLX5_MP_REQ_QUEUE_TX_STOP);
+ } else {
+ ret = mlx5_tx_queue_stop_primary(dev, idx);
+ }
+ return ret;
+}
+
+/**
+ * Rx queue start. Device queue goes to the ready state,
+ * all required mbufs are allocated and WQ is replenished.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_queue_start_primary(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+ int ret;
+
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
+ if (txq_ctrl->obj->type == MLX5_TXQ_OBJ_TYPE_DEVX_SQ) {
+ struct mlx5_devx_modify_sq_attr msq_attr = { 0 };
+ struct mlx5_txq_obj *obj = txq_ctrl->obj;
+
+ msq_attr.sq_state = MLX5_SQC_STATE_RDY;
+ msq_attr.state = MLX5_SQC_STATE_RST;
+ ret = mlx5_devx_cmd_modify_sq(obj->sq_devx, &msq_attr);
+ if (ret) {
+ rte_errno = errno;
+ DRV_LOG(ERR,
+ "Cannot change the Tx QP state to RESET "
+ "%s", strerror(errno));
+ return ret;
+ }
+ msq_attr.sq_state = MLX5_SQC_STATE_RST;
+ msq_attr.state = MLX5_SQC_STATE_RDY;
+ ret = mlx5_devx_cmd_modify_sq(obj->sq_devx, &msq_attr);
+ if (ret) {
+ rte_errno = errno;
+ DRV_LOG(ERR,
+ "Cannot change the Tx QP state to READY "
+ "%s", strerror(errno));
+ return ret;
+ }
+ } else {
+ struct ibv_qp_attr mod = {
+ .qp_state = IBV_QPS_RESET,
+ .port_num = (uint8_t)priv->dev_port,
+ };
+ struct ibv_qp *qp = txq_ctrl->obj->qp;
+
+ ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change the Tx QP state to RESET "
+ "%s", strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ mod.qp_state = IBV_QPS_INIT;
+ ret = mlx5_glue->modify_qp(qp, &mod,
+ (IBV_QP_STATE | IBV_QP_PORT));
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change Tx QP state to INIT %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ mod.qp_state = IBV_QPS_RTR;
+ ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change Tx QP state to RTR %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ mod.qp_state = IBV_QPS_RTS;
+ ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
+ if (ret) {
+ DRV_LOG(ERR, "Cannot change Tx QP state to RTS %s",
+ strerror(errno));
+ rte_errno = errno;
+ return ret;
+ }
+ }
+ txq_ctrl->txq.wqe_ci = 0;
+ txq_ctrl->txq.wqe_pi = 0;
+ txq_ctrl->txq.elts_comp = 0;
+ /* Set the actual queue state. */
+ dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STARTED;
+ return 0;
+}
+
+/**
+ * Rx queue start. Device queue goes to the ready state,
+ * all required mbufs are allocated and WQ is replenished.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_queue_start(struct rte_eth_dev *dev, uint16_t idx)
+{
+ int ret;
+
+ if (dev->data->tx_queue_state[idx] == RTE_ETH_QUEUE_STATE_HAIRPIN) {
+ DRV_LOG(ERR, "Hairpin queue can't be started");
+ rte_errno = EINVAL;
+ return -EINVAL;
+ }
+ if (dev->data->tx_queue_state[idx] == RTE_ETH_QUEUE_STATE_STARTED)
+ return 0;
+ if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+ ret = mlx5_mp_os_req_queue_control(dev, idx,
+ MLX5_MP_REQ_QUEUE_TX_START);
+ } else {
+ ret = mlx5_tx_queue_start_primary(dev, idx);
+ }
+ return ret;
+}
+
/**
* Tx queue presetup checks.
*
DRV_LOG(DEBUG, "port %u adding Tx queue %u to list",
dev->data->port_id, idx);
(*priv->txqs)[idx] = &txq_ctrl->txq;
+ dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STARTED;
return 0;
}
DRV_LOG(DEBUG, "port %u adding Tx queue %u to list",
dev->data->port_id, idx);
(*priv->txqs)[idx] = &txq_ctrl->txq;
+ dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_HAIRPIN;
return 0;
}
LIST_REMOVE(txq, next);
mlx5_free(txq);
(*priv->txqs)[idx] = NULL;
+ dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STOPPED;
return 0;
}
return 1;
git.droids-corp.org / dpdk.git / blobdiff