-/*-
- * BSD LICENSE
- *
- * Copyright 2015 6WIND S.A.
- * Copyright 2015 Mellanox.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of 6WIND S.A. nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2015 6WIND S.A.
+ * Copyright 2015 Mellanox Technologies, Ltd
*/
#include <stddef.h>
-#include <assert.h>
#include <errno.h>
#include <string.h>
#include <stdint.h>
#include <unistd.h>
-#include <sys/mman.h>
-
-/* Verbs header. */
-/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
-#ifdef PEDANTIC
-#pragma GCC diagnostic ignored "-Wpedantic"
-#endif
-#include <infiniband/verbs.h>
-#ifdef PEDANTIC
-#pragma GCC diagnostic error "-Wpedantic"
-#endif
+#include <inttypes.h>
#include <rte_mbuf.h>
#include <rte_malloc.h>
-#include <rte_ethdev.h>
+#include <ethdev_driver.h>
+#include <rte_bus_pci.h>
#include <rte_common.h>
+#include <rte_eal_paging.h>
+
+#include <mlx5_common.h>
+#include <mlx5_common_mr.h>
+#include <mlx5_malloc.h>
-#include "mlx5_utils.h"
#include "mlx5_defs.h"
+#include "mlx5_utils.h"
#include "mlx5.h"
+#include "mlx5_tx.h"
#include "mlx5_rxtx.h"
#include "mlx5_autoconf.h"
unsigned int i;
for (i = 0; (i != elts_n); ++i)
- (*txq_ctrl->txq.elts)[i] = NULL;
- DEBUG("%p: allocated and configured %u WRs", (void *)txq_ctrl, elts_n);
+ txq_ctrl->txq.elts[i] = NULL;
+ DRV_LOG(DEBUG, "port %u Tx queue %u allocated and configured %u WRs",
+ PORT_ID(txq_ctrl->priv), txq_ctrl->txq.idx, elts_n);
txq_ctrl->txq.elts_head = 0;
txq_ctrl->txq.elts_tail = 0;
txq_ctrl->txq.elts_comp = 0;
* @param txq_ctrl
* Pointer to TX queue structure.
*/
-static void
+void
txq_free_elts(struct mlx5_txq_ctrl *txq_ctrl)
{
const uint16_t elts_n = 1 << txq_ctrl->txq.elts_n;
const uint16_t elts_m = elts_n - 1;
uint16_t elts_head = txq_ctrl->txq.elts_head;
uint16_t elts_tail = txq_ctrl->txq.elts_tail;
- struct rte_mbuf *(*elts)[elts_n] = txq_ctrl->txq.elts;
+ struct rte_mbuf *(*elts)[elts_n] = &txq_ctrl->txq.elts;
- DEBUG("%p: freeing WRs", (void *)txq_ctrl);
+ DRV_LOG(DEBUG, "port %u Tx queue %u freeing WRs",
+ PORT_ID(txq_ctrl->priv), txq_ctrl->txq.idx);
txq_ctrl->txq.elts_head = 0;
txq_ctrl->txq.elts_tail = 0;
txq_ctrl->txq.elts_comp = 0;
while (elts_tail != elts_head) {
struct rte_mbuf *elt = (*elts)[elts_tail & elts_m];
- assert(elt != NULL);
+ MLX5_ASSERT(elt != NULL);
rte_pktmbuf_free_seg(elt);
-#ifndef NDEBUG
+#ifdef RTE_LIBRTE_MLX5_DEBUG
/* Poisoning. */
memset(&(*elts)[elts_tail & elts_m],
0x77,
}
}
+/**
+ * Returns the per-port supported offloads.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ *
+ * @return
+ * Supported Tx offloads.
+ */
+uint64_t
+mlx5_get_tx_port_offloads(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ uint64_t offloads = (RTE_ETH_TX_OFFLOAD_MULTI_SEGS |
+ RTE_ETH_TX_OFFLOAD_VLAN_INSERT);
+ struct mlx5_dev_config *config = &priv->config;
+
+ if (config->hw_csum)
+ offloads |= (RTE_ETH_TX_OFFLOAD_IPV4_CKSUM |
+ RTE_ETH_TX_OFFLOAD_UDP_CKSUM |
+ RTE_ETH_TX_OFFLOAD_TCP_CKSUM);
+ if (config->tso)
+ offloads |= RTE_ETH_TX_OFFLOAD_TCP_TSO;
+ if (config->tx_pp)
+ offloads |= RTE_ETH_TX_OFFLOAD_SEND_ON_TIMESTAMP;
+ if (config->swp) {
+ if (config->swp & MLX5_SW_PARSING_CSUM_CAP)
+ offloads |= RTE_ETH_TX_OFFLOAD_OUTER_IPV4_CKSUM;
+ if (config->swp & MLX5_SW_PARSING_TSO_CAP)
+ offloads |= (RTE_ETH_TX_OFFLOAD_IP_TNL_TSO |
+ RTE_ETH_TX_OFFLOAD_UDP_TNL_TSO);
+ }
+ if (config->tunnel_en) {
+ if (config->hw_csum)
+ offloads |= RTE_ETH_TX_OFFLOAD_OUTER_IPV4_CKSUM;
+ if (config->tso) {
+ if (config->tunnel_en &
+ MLX5_TUNNELED_OFFLOADS_VXLAN_CAP)
+ offloads |= RTE_ETH_TX_OFFLOAD_VXLAN_TNL_TSO;
+ if (config->tunnel_en &
+ MLX5_TUNNELED_OFFLOADS_GRE_CAP)
+ offloads |= RTE_ETH_TX_OFFLOAD_GRE_TNL_TSO;
+ if (config->tunnel_en &
+ MLX5_TUNNELED_OFFLOADS_GENEVE_CAP)
+ offloads |= RTE_ETH_TX_OFFLOAD_GENEVE_TNL_TSO;
+ }
+ }
+ if (!config->mprq.enabled)
+ offloads |= RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE;
+ return offloads;
+}
+
+/* Fetches and drops all SW-owned and error CQEs to synchronize CQ. */
+static void
+txq_sync_cq(struct mlx5_txq_data *txq)
+{
+ volatile struct mlx5_cqe *cqe;
+ int ret, i;
+
+ i = txq->cqe_s;
+ do {
+ cqe = &txq->cqes[txq->cq_ci & txq->cqe_m];
+ ret = check_cqe(cqe, txq->cqe_s, txq->cq_ci);
+ if (unlikely(ret != MLX5_CQE_STATUS_SW_OWN)) {
+ if (likely(ret != MLX5_CQE_STATUS_ERR)) {
+ /* No new CQEs in completion queue. */
+ MLX5_ASSERT(ret == MLX5_CQE_STATUS_HW_OWN);
+ break;
+ }
+ }
+ ++txq->cq_ci;
+ } while (--i);
+ /* Move all CQEs to HW ownership. */
+ for (i = 0; i < txq->cqe_s; i++) {
+ cqe = &txq->cqes[i];
+ cqe->op_own = MLX5_CQE_INVALIDATE;
+ }
+ /* Resync CQE and WQE (WQ in reset state). */
+ rte_io_wmb();
+ *txq->cq_db = rte_cpu_to_be_32(txq->cq_ci);
+ txq->cq_pi = txq->cq_ci;
+ rte_io_wmb();
+}
+
+/**
+ * Tx queue stop. Device queue goes to the idle state,
+ * all involved mbufs are freed from elts/WQ.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * Tx queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_queue_stop_primary(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+ int ret;
+
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
+ /* Move QP to RESET state. */
+ ret = priv->obj_ops.txq_obj_modify(txq_ctrl->obj, MLX5_TXQ_MOD_RDY2RST,
+ (uint8_t)priv->dev_port);
+ if (ret)
+ return ret;
+ /* Handle all send completions. */
+ txq_sync_cq(txq);
+ /* Free elts stored in the SQ. */
+ txq_free_elts(txq_ctrl);
+ /* Prevent writing new pkts to SQ by setting no free WQE.*/
+ txq->wqe_ci = txq->wqe_s;
+ txq->wqe_pi = 0;
+ txq->elts_comp = 0;
+ /* Set the actual queue state. */
+ dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STOPPED;
+ return 0;
+}
+
+/**
+ * Tx queue stop. Device queue goes to the idle state,
+ * all involved mbufs are freed from elts/WQ.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * Tx queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_queue_stop(struct rte_eth_dev *dev, uint16_t idx)
+{
+ int ret;
+
+ if (rte_eth_dev_is_tx_hairpin_queue(dev, idx)) {
+ DRV_LOG(ERR, "Hairpin queue can't be stopped");
+ rte_errno = EINVAL;
+ return -EINVAL;
+ }
+ if (dev->data->tx_queue_state[idx] == RTE_ETH_QUEUE_STATE_STOPPED)
+ return 0;
+ if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+ ret = mlx5_mp_os_req_queue_control(dev, idx,
+ MLX5_MP_REQ_QUEUE_TX_STOP);
+ } else {
+ ret = mlx5_tx_queue_stop_primary(dev, idx);
+ }
+ return ret;
+}
+
+/**
+ * Rx queue start. Device queue goes to the ready state,
+ * all required mbufs are allocated and WQ is replenished.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_queue_start_primary(struct rte_eth_dev *dev, uint16_t idx)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+ int ret;
+
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
+ ret = priv->obj_ops.txq_obj_modify(txq_ctrl->obj,
+ MLX5_TXQ_MOD_RST2RDY,
+ (uint8_t)priv->dev_port);
+ if (ret)
+ return ret;
+ txq_ctrl->txq.wqe_ci = 0;
+ txq_ctrl->txq.wqe_pi = 0;
+ txq_ctrl->txq.elts_comp = 0;
+ /* Set the actual queue state. */
+ dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STARTED;
+ return 0;
+}
+
+/**
+ * Rx queue start. Device queue goes to the ready state,
+ * all required mbufs are allocated and WQ is replenished.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_queue_start(struct rte_eth_dev *dev, uint16_t idx)
+{
+ int ret;
+
+ if (rte_eth_dev_is_tx_hairpin_queue(dev, idx)) {
+ DRV_LOG(ERR, "Hairpin queue can't be started");
+ rte_errno = EINVAL;
+ return -EINVAL;
+ }
+ if (dev->data->tx_queue_state[idx] == RTE_ETH_QUEUE_STATE_STARTED)
+ return 0;
+ if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+ ret = mlx5_mp_os_req_queue_control(dev, idx,
+ MLX5_MP_REQ_QUEUE_TX_START);
+ } else {
+ ret = mlx5_tx_queue_start_primary(dev, idx);
+ }
+ return ret;
+}
+
+/**
+ * Tx queue presetup checks.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * Tx queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_tx_queue_pre_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t *desc)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ if (*desc <= MLX5_TX_COMP_THRESH) {
+ DRV_LOG(WARNING,
+ "port %u number of descriptors requested for Tx queue"
+ " %u must be higher than MLX5_TX_COMP_THRESH, using %u"
+ " instead of %u", dev->data->port_id, idx,
+ MLX5_TX_COMP_THRESH + 1, *desc);
+ *desc = MLX5_TX_COMP_THRESH + 1;
+ }
+ if (!rte_is_power_of_2(*desc)) {
+ *desc = 1 << log2above(*desc);
+ DRV_LOG(WARNING,
+ "port %u increased number of descriptors in Tx queue"
+ " %u to the next power of two (%d)",
+ dev->data->port_id, idx, *desc);
+ }
+ DRV_LOG(DEBUG, "port %u configuring queue %u for %u descriptors",
+ dev->data->port_id, idx, *desc);
+ if (idx >= priv->txqs_n) {
+ DRV_LOG(ERR, "port %u Tx queue index out of range (%u >= %u)",
+ dev->data->port_id, idx, priv->txqs_n);
+ rte_errno = EOVERFLOW;
+ return -rte_errno;
+ }
+ if (!mlx5_txq_releasable(dev, idx)) {
+ rte_errno = EBUSY;
+ DRV_LOG(ERR, "port %u unable to release queue index %u",
+ dev->data->port_id, idx);
+ return -rte_errno;
+ }
+ mlx5_txq_release(dev, idx);
+ return 0;
+}
+
/**
* DPDK callback to configure a TX queue.
*
* Thresholds parameters.
*
* @return
- * 0 on success, negative errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_tx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
unsigned int socket, const struct rte_eth_txconf *conf)
{
- struct priv *priv = dev->data->dev_private;
+ struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_txq_data *txq = (*priv->txqs)[idx];
struct mlx5_txq_ctrl *txq_ctrl =
container_of(txq, struct mlx5_txq_ctrl, txq);
- int ret = 0;
+ int res;
- if (mlx5_is_secondary())
- return -E_RTE_SECONDARY;
-
- priv_lock(priv);
- if (desc <= MLX5_TX_COMP_THRESH) {
- WARN("%p: number of descriptors requested for TX queue %u"
- " must be higher than MLX5_TX_COMP_THRESH, using"
- " %u instead of %u",
- (void *)dev, idx, MLX5_TX_COMP_THRESH + 1, desc);
- desc = MLX5_TX_COMP_THRESH + 1;
- }
- if (!rte_is_power_of_2(desc)) {
- desc = 1 << log2above(desc);
- WARN("%p: increased number of descriptors in TX queue %u"
- " to the next power of two (%d)",
- (void *)dev, idx, desc);
- }
- DEBUG("%p: configuring queue %u for %u descriptors",
- (void *)dev, idx, desc);
- if (idx >= priv->txqs_n) {
- ERROR("%p: queue index out of range (%u >= %u)",
- (void *)dev, idx, priv->txqs_n);
- priv_unlock(priv);
- return -EOVERFLOW;
- }
- if (!mlx5_priv_txq_releasable(priv, idx)) {
- ret = EBUSY;
- ERROR("%p: unable to release queue index %u",
- (void *)dev, idx);
- goto out;
- }
- mlx5_priv_txq_release(priv, idx);
- txq_ctrl = mlx5_priv_txq_new(priv, idx, desc, socket, conf);
+ res = mlx5_tx_queue_pre_setup(dev, idx, &desc);
+ if (res)
+ return res;
+ txq_ctrl = mlx5_txq_new(dev, idx, desc, socket, conf);
if (!txq_ctrl) {
- ERROR("%p: unable to allocate queue index %u",
- (void *)dev, idx);
- ret = ENOMEM;
- goto out;
+ DRV_LOG(ERR, "port %u unable to allocate queue index %u",
+ dev->data->port_id, idx);
+ return -rte_errno;
}
- DEBUG("%p: adding TX queue %p to list",
- (void *)dev, (void *)txq_ctrl);
+ DRV_LOG(DEBUG, "port %u adding Tx queue %u to list",
+ dev->data->port_id, idx);
(*priv->txqs)[idx] = &txq_ctrl->txq;
-out:
- priv_unlock(priv);
- return -ret;
+ return 0;
+}
+
+/**
+ * DPDK callback to configure a TX hairpin queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * TX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param[in] hairpin_conf
+ * The hairpin binding configuration.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_tx_hairpin_queue_setup(struct rte_eth_dev *dev, uint16_t idx,
+ uint16_t desc,
+ const struct rte_eth_hairpin_conf *hairpin_conf)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq = (*priv->txqs)[idx];
+ struct mlx5_txq_ctrl *txq_ctrl =
+ container_of(txq, struct mlx5_txq_ctrl, txq);
+ int res;
+
+ res = mlx5_tx_queue_pre_setup(dev, idx, &desc);
+ if (res)
+ return res;
+ if (hairpin_conf->peer_count != 1) {
+ rte_errno = EINVAL;
+ DRV_LOG(ERR, "port %u unable to setup Tx hairpin queue index %u"
+ " peer count is %u", dev->data->port_id,
+ idx, hairpin_conf->peer_count);
+ return -rte_errno;
+ }
+ if (hairpin_conf->peers[0].port == dev->data->port_id) {
+ if (hairpin_conf->peers[0].queue >= priv->rxqs_n) {
+ rte_errno = EINVAL;
+ DRV_LOG(ERR, "port %u unable to setup Tx hairpin queue"
+ " index %u, Rx %u is larger than %u",
+ dev->data->port_id, idx,
+ hairpin_conf->peers[0].queue, priv->txqs_n);
+ return -rte_errno;
+ }
+ } else {
+ if (hairpin_conf->manual_bind == 0 ||
+ hairpin_conf->tx_explicit == 0) {
+ rte_errno = EINVAL;
+ DRV_LOG(ERR, "port %u unable to setup Tx hairpin queue"
+ " index %u peer port %u with attributes %u %u",
+ dev->data->port_id, idx,
+ hairpin_conf->peers[0].port,
+ hairpin_conf->manual_bind,
+ hairpin_conf->tx_explicit);
+ return -rte_errno;
+ }
+ }
+ txq_ctrl = mlx5_txq_hairpin_new(dev, idx, desc, hairpin_conf);
+ if (!txq_ctrl) {
+ DRV_LOG(ERR, "port %u unable to allocate queue index %u",
+ dev->data->port_id, idx);
+ return -rte_errno;
+ }
+ DRV_LOG(DEBUG, "port %u adding Tx queue %u to list",
+ dev->data->port_id, idx);
+ (*priv->txqs)[idx] = &txq_ctrl->txq;
+ dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_HAIRPIN;
+ return 0;
}
/**
* DPDK callback to release a TX queue.
*
- * @param dpdk_txq
- * Generic TX queue pointer.
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param qid
+ * Transmit queue index.
*/
void
-mlx5_tx_queue_release(void *dpdk_txq)
+mlx5_tx_queue_release(struct rte_eth_dev *dev, uint16_t qid)
{
- struct mlx5_txq_data *txq = (struct mlx5_txq_data *)dpdk_txq;
- struct mlx5_txq_ctrl *txq_ctrl;
- struct priv *priv;
- unsigned int i;
+ struct mlx5_txq_data *txq = dev->data->tx_queues[qid];
- if (mlx5_is_secondary())
+ if (txq == NULL)
return;
+ DRV_LOG(DEBUG, "port %u removing Tx queue %u from list",
+ dev->data->port_id, qid);
+ mlx5_txq_release(dev, qid);
+}
- if (txq == NULL)
+/**
+ * Remap UAR register of a Tx queue for secondary process.
+ *
+ * Remapped address is stored at the table in the process private structure of
+ * the device, indexed by queue index.
+ *
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
+ * @param fd
+ * Verbs file descriptor to map UAR pages.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+txq_uar_init_secondary(struct mlx5_txq_ctrl *txq_ctrl, int fd)
+{
+ struct mlx5_priv *priv = txq_ctrl->priv;
+ struct mlx5_proc_priv *ppriv = MLX5_PROC_PRIV(PORT_ID(priv));
+ struct mlx5_proc_priv *primary_ppriv = priv->sh->pppriv;
+ struct mlx5_txq_data *txq = &txq_ctrl->txq;
+ void *addr;
+ uintptr_t uar_va;
+ uintptr_t offset;
+ const size_t page_size = rte_mem_page_size();
+ if (page_size == (size_t)-1) {
+ DRV_LOG(ERR, "Failed to get mem page size");
+ rte_errno = ENOMEM;
+ return -rte_errno;
+ }
+
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
+ return 0;
+ MLX5_ASSERT(ppriv);
+ /*
+ * As rdma-core, UARs are mapped in size of OS page
+ * size. Ref to libmlx5 function: mlx5_init_context()
+ */
+ uar_va = (uintptr_t)primary_ppriv->uar_table[txq->idx].db;
+ offset = uar_va & (page_size - 1); /* Offset in page. */
+ addr = rte_mem_map(NULL, page_size, RTE_PROT_WRITE, RTE_MAP_SHARED,
+ fd, txq_ctrl->uar_mmap_offset);
+ if (!addr) {
+ DRV_LOG(ERR, "Port %u mmap failed for BF reg of txq %u.",
+ txq->port_id, txq->idx);
+ rte_errno = ENXIO;
+ return -rte_errno;
+ }
+ addr = RTE_PTR_ADD(addr, offset);
+ ppriv->uar_table[txq->idx].db = addr;
+#ifndef RTE_ARCH_64
+ ppriv->uar_table[txq->idx].sl_p =
+ primary_ppriv->uar_table[txq->idx].sl_p;
+#endif
+ return 0;
+}
+
+/**
+ * Unmap UAR register of a Tx queue for secondary process.
+ *
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
+ */
+static void
+txq_uar_uninit_secondary(struct mlx5_txq_ctrl *txq_ctrl)
+{
+ struct mlx5_proc_priv *ppriv = MLX5_PROC_PRIV(PORT_ID(txq_ctrl->priv));
+ void *addr;
+ const size_t page_size = rte_mem_page_size();
+ if (page_size == (size_t)-1) {
+ DRV_LOG(ERR, "Failed to get mem page size");
+ rte_errno = ENOMEM;
+ }
+
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
return;
- txq_ctrl = container_of(txq, struct mlx5_txq_ctrl, txq);
- priv = txq_ctrl->priv;
- priv_lock(priv);
- for (i = 0; (i != priv->txqs_n); ++i)
- if ((*priv->txqs)[i] == txq) {
- DEBUG("%p: removing TX queue %p from list",
- (void *)priv->dev, (void *)txq_ctrl);
- mlx5_priv_txq_release(priv, i);
- break;
- }
- priv_unlock(priv);
+ addr = ppriv->uar_table[txq_ctrl->txq.idx].db;
+ rte_mem_unmap(RTE_PTR_ALIGN_FLOOR(addr, page_size), page_size);
}
+/**
+ * Deinitialize Tx UAR registers for secondary process.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ */
+void
+mlx5_tx_uar_uninit_secondary(struct rte_eth_dev *dev)
+{
+ struct mlx5_proc_priv *ppriv = (struct mlx5_proc_priv *)
+ dev->process_private;
+ const size_t page_size = rte_mem_page_size();
+ void *addr;
+ unsigned int i;
+
+ if (page_size == (size_t)-1) {
+ DRV_LOG(ERR, "Failed to get mem page size");
+ return;
+ }
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
+ for (i = 0; i != ppriv->uar_table_sz; ++i) {
+ if (!ppriv->uar_table[i].db)
+ continue;
+ addr = ppriv->uar_table[i].db;
+ rte_mem_unmap(RTE_PTR_ALIGN_FLOOR(addr, page_size), page_size);
+
+ }
+}
/**
- * Map locally UAR used in Tx queues for BlueFlame doorbell.
+ * Initialize Tx UAR registers for secondary process.
*
- * @param[in] priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param fd
* Verbs file descriptor to map UAR pages.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
-priv_tx_uar_remap(struct priv *priv, int fd)
+mlx5_tx_uar_init_secondary(struct rte_eth_dev *dev, int fd)
{
- unsigned int i, j;
- uintptr_t pages[priv->txqs_n];
- unsigned int pages_n = 0;
- uintptr_t uar_va;
- void *addr;
+ struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_txq_data *txq;
struct mlx5_txq_ctrl *txq_ctrl;
- int already_mapped;
- size_t page_size = sysconf(_SC_PAGESIZE);
+ unsigned int i;
+ int ret;
- memset(pages, 0, priv->txqs_n * sizeof(uintptr_t));
- /*
- * As rdma-core, UARs are mapped in size of OS page size.
- * Use aligned address to avoid duplicate mmap.
- * Ref to libmlx5 function: mlx5_init_context()
- */
+ MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_SECONDARY);
for (i = 0; i != priv->txqs_n; ++i) {
+ if (!(*priv->txqs)[i])
+ continue;
txq = (*priv->txqs)[i];
txq_ctrl = container_of(txq, struct mlx5_txq_ctrl, txq);
- uar_va = (uintptr_t)txq_ctrl->txq.bf_reg;
- uar_va = RTE_ALIGN_FLOOR(uar_va, page_size);
- already_mapped = 0;
- for (j = 0; j != pages_n; ++j) {
- if (pages[j] == uar_va) {
- already_mapped = 1;
- break;
- }
- }
- if (already_mapped)
+ if (txq_ctrl->type != MLX5_TXQ_TYPE_STANDARD)
continue;
- pages[pages_n++] = uar_va;
- addr = mmap((void *)uar_va, page_size,
- PROT_WRITE, MAP_FIXED | MAP_SHARED, fd,
- txq_ctrl->uar_mmap_offset);
- if (addr != (void *)uar_va) {
- ERROR("call to mmap failed on UAR for txq %d\n", i);
- return -1;
- }
+ MLX5_ASSERT(txq->idx == (uint16_t)i);
+ ret = txq_uar_init_secondary(txq_ctrl, fd);
+ if (ret)
+ goto error;
}
return 0;
+error:
+ /* Rollback. */
+ do {
+ if (!(*priv->txqs)[i])
+ continue;
+ txq = (*priv->txqs)[i];
+ txq_ctrl = container_of(txq, struct mlx5_txq_ctrl, txq);
+ txq_uar_uninit_secondary(txq_ctrl);
+ } while (i--);
+ return -rte_errno;
}
/**
- * Create the Tx queue Verbs object.
+ * Verify the Verbs Tx queue list is empty
*
- * @param priv
- * Pointer to private structure.
- * @param idx
- * Queue index in DPDK Rx queue array
+ * @param dev
+ * Pointer to Ethernet device.
*
* @return
- * The Verbs object initialised if it can be created.
+ * The number of object not released.
*/
-struct mlx5_txq_ibv*
-mlx5_priv_txq_ibv_new(struct priv *priv, uint16_t idx)
+int
+mlx5_txq_obj_verify(struct rte_eth_dev *dev)
{
- struct mlx5_txq_data *txq_data = (*priv->txqs)[idx];
- struct mlx5_txq_ctrl *txq_ctrl =
- container_of(txq_data, struct mlx5_txq_ctrl, txq);
- struct mlx5_txq_ibv tmpl;
- struct mlx5_txq_ibv *txq_ibv;
- union {
- struct ibv_qp_init_attr_ex init;
- struct ibv_cq_init_attr_ex cq;
- struct ibv_qp_attr mod;
- struct ibv_cq_ex cq_attr;
- } attr;
- unsigned int cqe_n;
- struct mlx5dv_qp qp = { .comp_mask = MLX5DV_QP_MASK_UAR_MMAP_OFFSET };
- struct mlx5dv_cq cq_info;
- struct mlx5dv_obj obj;
- const int desc = 1 << txq_data->elts_n;
+ struct mlx5_priv *priv = dev->data->dev_private;
int ret = 0;
+ struct mlx5_txq_obj *txq_obj;
- assert(txq_data);
- if (mlx5_getenv_int("MLX5_ENABLE_CQE_COMPRESSION")) {
- ERROR("MLX5_ENABLE_CQE_COMPRESSION must never be set");
- goto error;
- }
- memset(&tmpl, 0, sizeof(struct mlx5_txq_ibv));
- /* MRs will be registered in mp2mr[] later. */
- attr.cq = (struct ibv_cq_init_attr_ex){
- .comp_mask = 0,
- };
- cqe_n = ((desc / MLX5_TX_COMP_THRESH) - 1) ?
- ((desc / MLX5_TX_COMP_THRESH) - 1) : 1;
- if (priv->mps == MLX5_MPW_ENHANCED)
- cqe_n += MLX5_TX_COMP_THRESH_INLINE_DIV;
- tmpl.cq = ibv_create_cq(priv->ctx, cqe_n, NULL, NULL, 0);
- if (tmpl.cq == NULL) {
- ERROR("%p: CQ creation failure", (void *)txq_ctrl);
- goto error;
- }
- attr.init = (struct ibv_qp_init_attr_ex){
- /* CQ to be associated with the send queue. */
- .send_cq = tmpl.cq,
- /* CQ to be associated with the receive queue. */
- .recv_cq = tmpl.cq,
- .cap = {
- /* Max number of outstanding WRs. */
- .max_send_wr =
- ((priv->device_attr.orig_attr.max_qp_wr <
- desc) ?
- priv->device_attr.orig_attr.max_qp_wr :
- desc),
- /*
- * Max number of scatter/gather elements in a WR,
- * must be 1 to prevent libmlx5 from trying to affect
- * too much memory. TX gather is not impacted by the
- * priv->device_attr.max_sge limit and will still work
- * properly.
- */
- .max_send_sge = 1,
- },
- .qp_type = IBV_QPT_RAW_PACKET,
- /*
- * Do *NOT* enable this, completions events are managed per
- * Tx burst.
- */
- .sq_sig_all = 0,
- .pd = priv->pd,
- .comp_mask = IBV_QP_INIT_ATTR_PD,
- };
- if (txq_data->inline_en)
- attr.init.cap.max_inline_data = txq_ctrl->max_inline_data;
- if (txq_data->tso_en) {
- attr.init.max_tso_header = txq_ctrl->max_tso_header;
- attr.init.comp_mask |= IBV_QP_INIT_ATTR_MAX_TSO_HEADER;
- }
- tmpl.qp = ibv_create_qp_ex(priv->ctx, &attr.init);
- if (tmpl.qp == NULL) {
- ERROR("%p: QP creation failure", (void *)txq_ctrl);
- goto error;
- }
- attr.mod = (struct ibv_qp_attr){
- /* Move the QP to this state. */
- .qp_state = IBV_QPS_INIT,
- /* Primary port number. */
- .port_num = priv->port
- };
- ret = ibv_modify_qp(tmpl.qp, &attr.mod, (IBV_QP_STATE | IBV_QP_PORT));
- if (ret) {
- ERROR("%p: QP state to IBV_QPS_INIT failed", (void *)txq_ctrl);
- goto error;
- }
- attr.mod = (struct ibv_qp_attr){
- .qp_state = IBV_QPS_RTR
- };
- ret = ibv_modify_qp(tmpl.qp, &attr.mod, IBV_QP_STATE);
- if (ret) {
- ERROR("%p: QP state to IBV_QPS_RTR failed", (void *)txq_ctrl);
- goto error;
- }
- attr.mod.qp_state = IBV_QPS_RTS;
- ret = ibv_modify_qp(tmpl.qp, &attr.mod, IBV_QP_STATE);
- if (ret) {
- ERROR("%p: QP state to IBV_QPS_RTS failed", (void *)txq_ctrl);
- goto error;
- }
- txq_ibv = rte_calloc_socket(__func__, 1, sizeof(struct mlx5_txq_ibv), 0,
- txq_ctrl->socket);
- if (!txq_ibv) {
- ERROR("%p: cannot allocate memory", (void *)txq_ctrl);
- goto error;
- }
- obj.cq.in = tmpl.cq;
- obj.cq.out = &cq_info;
- obj.qp.in = tmpl.qp;
- obj.qp.out = &qp;
- ret = mlx5dv_init_obj(&obj, MLX5DV_OBJ_CQ | MLX5DV_OBJ_QP);
- if (ret != 0)
- goto error;
- if (cq_info.cqe_size != RTE_CACHE_LINE_SIZE) {
- ERROR("Wrong MLX5_CQE_SIZE environment variable value: "
- "it should be set to %u", RTE_CACHE_LINE_SIZE);
- goto error;
- }
- txq_data->cqe_n = log2above(cq_info.cqe_cnt);
- txq_data->qp_num_8s = tmpl.qp->qp_num << 8;
- txq_data->wqes = qp.sq.buf;
- txq_data->wqe_n = log2above(qp.sq.wqe_cnt);
- txq_data->qp_db = &qp.dbrec[MLX5_SND_DBR];
- txq_data->bf_reg = qp.bf.reg;
- txq_data->cq_db = cq_info.dbrec;
- txq_data->cqes =
- (volatile struct mlx5_cqe (*)[])
- (uintptr_t)cq_info.buf;
- txq_data->cq_ci = 0;
- txq_data->cq_pi = 0;
- txq_data->wqe_ci = 0;
- txq_data->wqe_pi = 0;
- txq_ibv->qp = tmpl.qp;
- txq_ibv->cq = tmpl.cq;
- rte_atomic32_inc(&txq_ibv->refcnt);
- if (qp.comp_mask & MLX5DV_QP_MASK_UAR_MMAP_OFFSET) {
- txq_ctrl->uar_mmap_offset = qp.uar_mmap_offset;
- } else {
- ERROR("Failed to retrieve UAR info, invalid libmlx5.so version");
- goto error;
+ LIST_FOREACH(txq_obj, &priv->txqsobj, next) {
+ DRV_LOG(DEBUG, "port %u Verbs Tx queue %u still referenced",
+ dev->data->port_id, txq_obj->txq_ctrl->txq.idx);
+ ++ret;
}
- DEBUG("%p: Verbs Tx queue %p: refcnt %d", (void *)priv,
- (void *)txq_ibv, rte_atomic32_read(&txq_ibv->refcnt));
- LIST_INSERT_HEAD(&priv->txqsibv, txq_ibv, next);
- return txq_ibv;
-error:
- if (tmpl.cq)
- claim_zero(ibv_destroy_cq(tmpl.cq));
- if (tmpl.qp)
- claim_zero(ibv_destroy_qp(tmpl.qp));
- return NULL;
+ return ret;
}
/**
- * Get an Tx queue Verbs object.
+ * Calculate the total number of WQEBB for Tx queue.
*
- * @param priv
- * Pointer to private structure.
- * @param idx
- * Queue index in DPDK Rx queue array
+ * Simplified version of calc_sq_size() in rdma-core.
+ *
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
*
* @return
- * The Verbs object if it exists.
+ * The number of WQEBB.
*/
-struct mlx5_txq_ibv*
-mlx5_priv_txq_ibv_get(struct priv *priv, uint16_t idx)
+static int
+txq_calc_wqebb_cnt(struct mlx5_txq_ctrl *txq_ctrl)
{
- struct mlx5_txq_ctrl *txq_ctrl;
+ unsigned int wqe_size;
+ const unsigned int desc = 1 << txq_ctrl->txq.elts_n;
- if (idx >= priv->txqs_n)
- return NULL;
- if (!(*priv->txqs)[idx])
- return NULL;
- txq_ctrl = container_of((*priv->txqs)[idx], struct mlx5_txq_ctrl, txq);
- if (txq_ctrl->ibv) {
- rte_atomic32_inc(&txq_ctrl->ibv->refcnt);
- DEBUG("%p: Verbs Tx queue %p: refcnt %d", (void *)priv,
- (void *)txq_ctrl->ibv,
- rte_atomic32_read(&txq_ctrl->ibv->refcnt));
- }
- return txq_ctrl->ibv;
+ wqe_size = MLX5_WQE_CSEG_SIZE +
+ MLX5_WQE_ESEG_SIZE +
+ MLX5_WSEG_SIZE -
+ MLX5_ESEG_MIN_INLINE_SIZE +
+ txq_ctrl->max_inline_data;
+ return rte_align32pow2(wqe_size * desc) / MLX5_WQE_SIZE;
}
/**
- * Release an Tx verbs queue object.
+ * Calculate the maximal inline data size for Tx queue.
*
- * @param priv
- * Pointer to private structure.
- * @param txq_ibv
- * Verbs Tx queue object.
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
*
* @return
- * 0 on success, errno on failure.
+ * The maximal inline data size.
*/
-int
-mlx5_priv_txq_ibv_release(struct priv *priv, struct mlx5_txq_ibv *txq_ibv)
+static unsigned int
+txq_calc_inline_max(struct mlx5_txq_ctrl *txq_ctrl)
{
- (void)priv;
- assert(txq_ibv);
- DEBUG("%p: Verbs Tx queue %p: refcnt %d", (void *)priv,
- (void *)txq_ibv, rte_atomic32_read(&txq_ibv->refcnt));
- if (rte_atomic32_dec_and_test(&txq_ibv->refcnt)) {
- claim_zero(ibv_destroy_qp(txq_ibv->qp));
- claim_zero(ibv_destroy_cq(txq_ibv->cq));
- LIST_REMOVE(txq_ibv, next);
- rte_free(txq_ibv);
+ const unsigned int desc = 1 << txq_ctrl->txq.elts_n;
+ struct mlx5_priv *priv = txq_ctrl->priv;
+ unsigned int wqe_size;
+
+ wqe_size = priv->sh->device_attr.max_qp_wr / desc;
+ if (!wqe_size)
return 0;
- }
- return EBUSY;
+ /*
+ * This calculation is derived from tthe source of
+ * mlx5_calc_send_wqe() in rdma_core library.
+ */
+ wqe_size = wqe_size * MLX5_WQE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WSEG_SIZE -
+ MLX5_WSEG_SIZE +
+ MLX5_DSEG_MIN_INLINE_SIZE;
+ return wqe_size;
}
/**
- * Return true if a single reference exists on the object.
+ * Set Tx queue parameters from device configuration.
*
- * @param priv
- * Pointer to private structure.
- * @param txq_ibv
- * Verbs Tx queue object.
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
*/
-int
-mlx5_priv_txq_ibv_releasable(struct priv *priv, struct mlx5_txq_ibv *txq_ibv)
+static void
+txq_set_params(struct mlx5_txq_ctrl *txq_ctrl)
{
- (void)priv;
- assert(txq_ibv);
- return (rte_atomic32_read(&txq_ibv->refcnt) == 1);
+ struct mlx5_priv *priv = txq_ctrl->priv;
+ struct mlx5_dev_config *config = &priv->config;
+ unsigned int inlen_send; /* Inline data for ordinary SEND.*/
+ unsigned int inlen_empw; /* Inline data for enhanced MPW. */
+ unsigned int inlen_mode; /* Minimal required Inline data. */
+ unsigned int txqs_inline; /* Min Tx queues to enable inline. */
+ uint64_t dev_txoff = priv->dev_data->dev_conf.txmode.offloads;
+ bool tso = txq_ctrl->txq.offloads & (RTE_ETH_TX_OFFLOAD_TCP_TSO |
+ RTE_ETH_TX_OFFLOAD_VXLAN_TNL_TSO |
+ RTE_ETH_TX_OFFLOAD_GRE_TNL_TSO |
+ RTE_ETH_TX_OFFLOAD_IP_TNL_TSO |
+ RTE_ETH_TX_OFFLOAD_UDP_TNL_TSO);
+ bool vlan_inline;
+ unsigned int temp;
+
+ txq_ctrl->txq.fast_free =
+ !!((txq_ctrl->txq.offloads & RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE) &&
+ !(txq_ctrl->txq.offloads & RTE_ETH_TX_OFFLOAD_MULTI_SEGS) &&
+ !config->mprq.enabled);
+ if (config->txqs_inline == MLX5_ARG_UNSET)
+ txqs_inline =
+#if defined(RTE_ARCH_ARM64)
+ (priv->pci_dev && priv->pci_dev->id.device_id ==
+ PCI_DEVICE_ID_MELLANOX_CONNECTX5BF) ?
+ MLX5_INLINE_MAX_TXQS_BLUEFIELD :
+#endif
+ MLX5_INLINE_MAX_TXQS;
+ else
+ txqs_inline = (unsigned int)config->txqs_inline;
+ inlen_send = (config->txq_inline_max == MLX5_ARG_UNSET) ?
+ MLX5_SEND_DEF_INLINE_LEN :
+ (unsigned int)config->txq_inline_max;
+ inlen_empw = (config->txq_inline_mpw == MLX5_ARG_UNSET) ?
+ MLX5_EMPW_DEF_INLINE_LEN :
+ (unsigned int)config->txq_inline_mpw;
+ inlen_mode = (config->txq_inline_min == MLX5_ARG_UNSET) ?
+ 0 : (unsigned int)config->txq_inline_min;
+ if (config->mps != MLX5_MPW_ENHANCED && config->mps != MLX5_MPW)
+ inlen_empw = 0;
+ /*
+ * If there is requested minimal amount of data to inline
+ * we MUST enable inlining. This is a case for ConnectX-4
+ * which usually requires L2 inlined for correct operating
+ * and ConnectX-4 Lx which requires L2-L4 inlined to
+ * support E-Switch Flows.
+ */
+ if (inlen_mode) {
+ if (inlen_mode <= MLX5_ESEG_MIN_INLINE_SIZE) {
+ /*
+ * Optimize minimal inlining for single
+ * segment packets to fill one WQEBB
+ * without gaps.
+ */
+ temp = MLX5_ESEG_MIN_INLINE_SIZE;
+ } else {
+ temp = inlen_mode - MLX5_ESEG_MIN_INLINE_SIZE;
+ temp = RTE_ALIGN(temp, MLX5_WSEG_SIZE) +
+ MLX5_ESEG_MIN_INLINE_SIZE;
+ temp = RTE_MIN(temp, MLX5_SEND_MAX_INLINE_LEN);
+ }
+ if (temp != inlen_mode) {
+ DRV_LOG(INFO,
+ "port %u minimal required inline setting"
+ " aligned from %u to %u",
+ PORT_ID(priv), inlen_mode, temp);
+ inlen_mode = temp;
+ }
+ }
+ /*
+ * If port is configured to support VLAN insertion and device
+ * does not support this feature by HW (for NICs before ConnectX-5
+ * or in case of wqe_vlan_insert flag is not set) we must enable
+ * data inline on all queues because it is supported by single
+ * tx_burst routine.
+ */
+ txq_ctrl->txq.vlan_en = config->hw_vlan_insert;
+ vlan_inline = (dev_txoff & RTE_ETH_TX_OFFLOAD_VLAN_INSERT) &&
+ !config->hw_vlan_insert;
+ /*
+ * If there are few Tx queues it is prioritized
+ * to save CPU cycles and disable data inlining at all.
+ */
+ if (inlen_send && priv->txqs_n >= txqs_inline) {
+ /*
+ * The data sent with ordinal MLX5_OPCODE_SEND
+ * may be inlined in Ethernet Segment, align the
+ * length accordingly to fit entire WQEBBs.
+ */
+ temp = RTE_MAX(inlen_send,
+ MLX5_ESEG_MIN_INLINE_SIZE + MLX5_WQE_DSEG_SIZE);
+ temp -= MLX5_ESEG_MIN_INLINE_SIZE + MLX5_WQE_DSEG_SIZE;
+ temp = RTE_ALIGN(temp, MLX5_WQE_SIZE);
+ temp += MLX5_ESEG_MIN_INLINE_SIZE + MLX5_WQE_DSEG_SIZE;
+ temp = RTE_MIN(temp, MLX5_WQE_SIZE_MAX +
+ MLX5_ESEG_MIN_INLINE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WQE_DSEG_SIZE * 2);
+ temp = RTE_MIN(temp, MLX5_SEND_MAX_INLINE_LEN);
+ temp = RTE_MAX(temp, inlen_mode);
+ if (temp != inlen_send) {
+ DRV_LOG(INFO,
+ "port %u ordinary send inline setting"
+ " aligned from %u to %u",
+ PORT_ID(priv), inlen_send, temp);
+ inlen_send = temp;
+ }
+ /*
+ * Not aligned to cache lines, but to WQEs.
+ * First bytes of data (initial alignment)
+ * is going to be copied explicitly at the
+ * beginning of inlining buffer in Ethernet
+ * Segment.
+ */
+ MLX5_ASSERT(inlen_send >= MLX5_ESEG_MIN_INLINE_SIZE);
+ MLX5_ASSERT(inlen_send <= MLX5_WQE_SIZE_MAX +
+ MLX5_ESEG_MIN_INLINE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WQE_DSEG_SIZE * 2);
+ } else if (inlen_mode) {
+ /*
+ * If minimal inlining is requested we must
+ * enable inlining in general, despite the
+ * number of configured queues. Ignore the
+ * txq_inline_max devarg, this is not
+ * full-featured inline.
+ */
+ inlen_send = inlen_mode;
+ inlen_empw = 0;
+ } else if (vlan_inline) {
+ /*
+ * Hardware does not report offload for
+ * VLAN insertion, we must enable data inline
+ * to implement feature by software.
+ */
+ inlen_send = MLX5_ESEG_MIN_INLINE_SIZE;
+ inlen_empw = 0;
+ } else {
+ inlen_send = 0;
+ inlen_empw = 0;
+ }
+ txq_ctrl->txq.inlen_send = inlen_send;
+ txq_ctrl->txq.inlen_mode = inlen_mode;
+ txq_ctrl->txq.inlen_empw = 0;
+ if (inlen_send && inlen_empw && priv->txqs_n >= txqs_inline) {
+ /*
+ * The data sent with MLX5_OPCODE_ENHANCED_MPSW
+ * may be inlined in Data Segment, align the
+ * length accordingly to fit entire WQEBBs.
+ */
+ temp = RTE_MAX(inlen_empw,
+ MLX5_WQE_SIZE + MLX5_DSEG_MIN_INLINE_SIZE);
+ temp -= MLX5_DSEG_MIN_INLINE_SIZE;
+ temp = RTE_ALIGN(temp, MLX5_WQE_SIZE);
+ temp += MLX5_DSEG_MIN_INLINE_SIZE;
+ temp = RTE_MIN(temp, MLX5_WQE_SIZE_MAX +
+ MLX5_DSEG_MIN_INLINE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WQE_DSEG_SIZE);
+ temp = RTE_MIN(temp, MLX5_EMPW_MAX_INLINE_LEN);
+ if (temp != inlen_empw) {
+ DRV_LOG(INFO,
+ "port %u enhanced empw inline setting"
+ " aligned from %u to %u",
+ PORT_ID(priv), inlen_empw, temp);
+ inlen_empw = temp;
+ }
+ MLX5_ASSERT(inlen_empw >= MLX5_ESEG_MIN_INLINE_SIZE);
+ MLX5_ASSERT(inlen_empw <= MLX5_WQE_SIZE_MAX +
+ MLX5_DSEG_MIN_INLINE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE -
+ MLX5_WQE_DSEG_SIZE);
+ txq_ctrl->txq.inlen_empw = inlen_empw;
+ }
+ txq_ctrl->max_inline_data = RTE_MAX(inlen_send, inlen_empw);
+ if (tso) {
+ txq_ctrl->max_tso_header = MLX5_MAX_TSO_HEADER;
+ txq_ctrl->max_inline_data = RTE_MAX(txq_ctrl->max_inline_data,
+ MLX5_MAX_TSO_HEADER);
+ txq_ctrl->txq.tso_en = 1;
+ }
+ if (((RTE_ETH_TX_OFFLOAD_VXLAN_TNL_TSO & txq_ctrl->txq.offloads) &&
+ (config->tunnel_en & MLX5_TUNNELED_OFFLOADS_VXLAN_CAP)) |
+ ((RTE_ETH_TX_OFFLOAD_GRE_TNL_TSO & txq_ctrl->txq.offloads) &&
+ (config->tunnel_en & MLX5_TUNNELED_OFFLOADS_GRE_CAP)) |
+ ((RTE_ETH_TX_OFFLOAD_GENEVE_TNL_TSO & txq_ctrl->txq.offloads) &&
+ (config->tunnel_en & MLX5_TUNNELED_OFFLOADS_GENEVE_CAP)) |
+ (config->swp & MLX5_SW_PARSING_TSO_CAP))
+ txq_ctrl->txq.tunnel_en = 1;
+ txq_ctrl->txq.swp_en = (((RTE_ETH_TX_OFFLOAD_IP_TNL_TSO |
+ RTE_ETH_TX_OFFLOAD_UDP_TNL_TSO) &
+ txq_ctrl->txq.offloads) && (config->swp &
+ MLX5_SW_PARSING_TSO_CAP)) |
+ ((RTE_ETH_TX_OFFLOAD_OUTER_IPV4_CKSUM &
+ txq_ctrl->txq.offloads) && (config->swp &
+ MLX5_SW_PARSING_CSUM_CAP));
}
/**
- * Verify the Verbs Tx queue list is empty
+ * Adjust Tx queue data inline parameters for large queue sizes.
+ * The data inline feature requires multiple WQEs to fit the packets,
+ * and if the large amount of Tx descriptors is requested by application
+ * the total WQE amount may exceed the hardware capabilities. If the
+ * default inline setting are used we can try to adjust these ones and
+ * meet the hardware requirements and not exceed the queue size.
*
- * @param priv
- * Pointer to private structure.
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
*
- * @return the number of object not released.
+ * @return
+ * Zero on success, otherwise the parameters can not be adjusted.
*/
-int
-mlx5_priv_txq_ibv_verify(struct priv *priv)
+static int
+txq_adjust_params(struct mlx5_txq_ctrl *txq_ctrl)
{
- int ret = 0;
- struct mlx5_txq_ibv *txq_ibv;
+ struct mlx5_priv *priv = txq_ctrl->priv;
+ struct mlx5_dev_config *config = &priv->config;
+ unsigned int max_inline;
- LIST_FOREACH(txq_ibv, &priv->txqsibv, next) {
- DEBUG("%p: Verbs Tx queue %p still referenced", (void *)priv,
- (void *)txq_ibv);
- ++ret;
+ max_inline = txq_calc_inline_max(txq_ctrl);
+ if (!txq_ctrl->txq.inlen_send) {
+ /*
+ * Inline data feature is not engaged at all.
+ * There is nothing to adjust.
+ */
+ return 0;
}
- return ret;
+ if (txq_ctrl->max_inline_data <= max_inline) {
+ /*
+ * The requested inline data length does not
+ * exceed queue capabilities.
+ */
+ return 0;
+ }
+ if (txq_ctrl->txq.inlen_mode > max_inline) {
+ DRV_LOG(ERR,
+ "minimal data inline requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ txq_ctrl->txq.inlen_mode, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.inlen_send > max_inline &&
+ config->txq_inline_max != MLX5_ARG_UNSET &&
+ config->txq_inline_max > (int)max_inline) {
+ DRV_LOG(ERR,
+ "txq_inline_max requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ txq_ctrl->txq.inlen_send, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.inlen_empw > max_inline &&
+ config->txq_inline_mpw != MLX5_ARG_UNSET &&
+ config->txq_inline_mpw > (int)max_inline) {
+ DRV_LOG(ERR,
+ "txq_inline_mpw requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ txq_ctrl->txq.inlen_empw, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.tso_en && max_inline < MLX5_MAX_TSO_HEADER) {
+ DRV_LOG(ERR,
+ "tso header inline requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ MLX5_MAX_TSO_HEADER, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.inlen_send > max_inline) {
+ DRV_LOG(WARNING,
+ "adjust txq_inline_max (%u->%u)"
+ " due to large Tx queue on port %u",
+ txq_ctrl->txq.inlen_send, max_inline,
+ priv->dev_data->port_id);
+ txq_ctrl->txq.inlen_send = max_inline;
+ }
+ if (txq_ctrl->txq.inlen_empw > max_inline) {
+ DRV_LOG(WARNING,
+ "adjust txq_inline_mpw (%u->%u)"
+ "due to large Tx queue on port %u",
+ txq_ctrl->txq.inlen_empw, max_inline,
+ priv->dev_data->port_id);
+ txq_ctrl->txq.inlen_empw = max_inline;
+ }
+ txq_ctrl->max_inline_data = RTE_MAX(txq_ctrl->txq.inlen_send,
+ txq_ctrl->txq.inlen_empw);
+ MLX5_ASSERT(txq_ctrl->max_inline_data <= max_inline);
+ MLX5_ASSERT(txq_ctrl->txq.inlen_mode <= max_inline);
+ MLX5_ASSERT(txq_ctrl->txq.inlen_mode <= txq_ctrl->txq.inlen_send);
+ MLX5_ASSERT(txq_ctrl->txq.inlen_mode <= txq_ctrl->txq.inlen_empw ||
+ !txq_ctrl->txq.inlen_empw);
+ return 0;
+error:
+ rte_errno = ENOMEM;
+ return -ENOMEM;
}
/**
* Create a DPDK Tx queue.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param idx
* TX queue index.
* @param desc
* Thresholds parameters.
*
* @return
- * A DPDK queue object on success.
+ * A DPDK queue object on success, NULL otherwise and rte_errno is set.
*/
-struct mlx5_txq_ctrl*
-mlx5_priv_txq_new(struct priv *priv, uint16_t idx, uint16_t desc,
- unsigned int socket,
- const struct rte_eth_txconf *conf)
+struct mlx5_txq_ctrl *
+mlx5_txq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ unsigned int socket, const struct rte_eth_txconf *conf)
{
- const unsigned int max_tso_inline =
- ((MLX5_MAX_TSO_HEADER + (RTE_CACHE_LINE_SIZE - 1)) /
- RTE_CACHE_LINE_SIZE);
+ struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_txq_ctrl *tmpl;
- tmpl = rte_calloc_socket("TXQ", 1,
- sizeof(*tmpl) +
- desc * sizeof(struct rte_mbuf *),
- 0, socket);
- if (!tmpl)
+ tmpl = mlx5_malloc(MLX5_MEM_RTE | MLX5_MEM_ZERO, sizeof(*tmpl) +
+ desc * sizeof(struct rte_mbuf *), 0, socket);
+ if (!tmpl) {
+ rte_errno = ENOMEM;
return NULL;
- assert(desc > MLX5_TX_COMP_THRESH);
- tmpl->txq.flags = conf->txq_flags;
+ }
+ if (mlx5_mr_ctrl_init(&tmpl->txq.mr_ctrl,
+ &priv->sh->cdev->mr_scache.dev_gen, socket)) {
+ /* rte_errno is already set. */
+ goto error;
+ }
+ MLX5_ASSERT(desc > MLX5_TX_COMP_THRESH);
+ tmpl->txq.offloads = conf->offloads |
+ dev->data->dev_conf.txmode.offloads;
tmpl->priv = priv;
tmpl->socket = socket;
tmpl->txq.elts_n = log2above(desc);
- if (priv->mps == MLX5_MPW_ENHANCED)
- tmpl->txq.mpw_hdr_dseg = priv->mpw_hdr_dseg;
- /* MRs will be registered in mp2mr[] later. */
- DEBUG("priv->device_attr.max_qp_wr is %d",
- priv->device_attr.orig_attr.max_qp_wr);
- DEBUG("priv->device_attr.max_sge is %d",
- priv->device_attr.orig_attr.max_sge);
- if (priv->txq_inline && (priv->txqs_n >= priv->txqs_inline)) {
- unsigned int ds_cnt;
-
- tmpl->txq.max_inline =
- ((priv->txq_inline + (RTE_CACHE_LINE_SIZE - 1)) /
- RTE_CACHE_LINE_SIZE);
- tmpl->txq.inline_en = 1;
- /* TSO and MPS can't be enabled concurrently. */
- assert(!priv->tso || !priv->mps);
- if (priv->mps == MLX5_MPW_ENHANCED) {
- tmpl->txq.inline_max_packet_sz =
- priv->inline_max_packet_sz;
- /* To minimize the size of data set, avoid requesting
- * too large WQ.
- */
- tmpl->max_inline_data =
- ((RTE_MIN(priv->txq_inline,
- priv->inline_max_packet_sz) +
- (RTE_CACHE_LINE_SIZE - 1)) /
- RTE_CACHE_LINE_SIZE) * RTE_CACHE_LINE_SIZE;
- } else if (priv->tso) {
- int inline_diff = tmpl->txq.max_inline - max_tso_inline;
+ tmpl->txq.elts_s = desc;
+ tmpl->txq.elts_m = desc - 1;
+ tmpl->txq.port_id = dev->data->port_id;
+ tmpl->txq.idx = idx;
+ txq_set_params(tmpl);
+ if (txq_adjust_params(tmpl))
+ goto error;
+ if (txq_calc_wqebb_cnt(tmpl) >
+ priv->sh->device_attr.max_qp_wr) {
+ DRV_LOG(ERR,
+ "port %u Tx WQEBB count (%d) exceeds the limit (%d),"
+ " try smaller queue size",
+ dev->data->port_id, txq_calc_wqebb_cnt(tmpl),
+ priv->sh->device_attr.max_qp_wr);
+ rte_errno = ENOMEM;
+ goto error;
+ }
+ __atomic_fetch_add(&tmpl->refcnt, 1, __ATOMIC_RELAXED);
+ tmpl->type = MLX5_TXQ_TYPE_STANDARD;
+ LIST_INSERT_HEAD(&priv->txqsctrl, tmpl, next);
+ return tmpl;
+error:
+ mlx5_mr_btree_free(&tmpl->txq.mr_ctrl.cache_bh);
+ mlx5_free(tmpl);
+ return NULL;
+}
- /*
- * Adjust inline value as Verbs aggregates
- * tso_inline and txq_inline fields.
- */
- tmpl->max_inline_data = inline_diff > 0 ?
- inline_diff *
- RTE_CACHE_LINE_SIZE :
- 0;
- } else {
- tmpl->max_inline_data =
- tmpl->txq.max_inline * RTE_CACHE_LINE_SIZE;
- }
- /*
- * Check if the inline size is too large in a way which
- * can make the WQE DS to overflow.
- * Considering in calculation:
- * WQE CTRL (1 DS)
- * WQE ETH (1 DS)
- * Inline part (N DS)
- */
- ds_cnt = 2 + (tmpl->txq.max_inline / MLX5_WQE_DWORD_SIZE);
- if (ds_cnt > MLX5_DSEG_MAX) {
- unsigned int max_inline = (MLX5_DSEG_MAX - 2) *
- MLX5_WQE_DWORD_SIZE;
-
- max_inline = max_inline - (max_inline %
- RTE_CACHE_LINE_SIZE);
- WARN("txq inline is too large (%d) setting it to "
- "the maximum possible: %d\n",
- priv->txq_inline, max_inline);
- tmpl->txq.max_inline = max_inline / RTE_CACHE_LINE_SIZE;
- }
+/**
+ * Create a DPDK Tx hairpin queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param idx
+ * TX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param hairpin_conf
+ * The hairpin configuration.
+ *
+ * @return
+ * A DPDK queue object on success, NULL otherwise and rte_errno is set.
+ */
+struct mlx5_txq_ctrl *
+mlx5_txq_hairpin_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ const struct rte_eth_hairpin_conf *hairpin_conf)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_ctrl *tmpl;
+
+ tmpl = mlx5_malloc(MLX5_MEM_RTE | MLX5_MEM_ZERO, sizeof(*tmpl), 0,
+ SOCKET_ID_ANY);
+ if (!tmpl) {
+ rte_errno = ENOMEM;
+ return NULL;
}
- if (priv->tso) {
- tmpl->max_tso_header = max_tso_inline * RTE_CACHE_LINE_SIZE;
- tmpl->txq.max_inline = RTE_MAX(tmpl->txq.max_inline,
- max_tso_inline);
- tmpl->txq.tso_en = 1;
- }
- if (priv->tunnel_en)
- tmpl->txq.tunnel_en = 1;
- tmpl->txq.elts =
- (struct rte_mbuf *(*)[1 << tmpl->txq.elts_n])(tmpl + 1);
- tmpl->txq.stats.idx = idx;
- rte_atomic32_inc(&tmpl->refcnt);
- DEBUG("%p: Tx queue %p: refcnt %d", (void *)priv,
- (void *)tmpl, rte_atomic32_read(&tmpl->refcnt));
+ tmpl->priv = priv;
+ tmpl->socket = SOCKET_ID_ANY;
+ tmpl->txq.elts_n = log2above(desc);
+ tmpl->txq.port_id = dev->data->port_id;
+ tmpl->txq.idx = idx;
+ tmpl->hairpin_conf = *hairpin_conf;
+ tmpl->type = MLX5_TXQ_TYPE_HAIRPIN;
+ __atomic_fetch_add(&tmpl->refcnt, 1, __ATOMIC_RELAXED);
LIST_INSERT_HEAD(&priv->txqsctrl, tmpl, next);
return tmpl;
}
/**
* Get a Tx queue.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param idx
* TX queue index.
*
* @return
* A pointer to the queue if it exists.
*/
-struct mlx5_txq_ctrl*
-mlx5_priv_txq_get(struct priv *priv, uint16_t idx)
+struct mlx5_txq_ctrl *
+mlx5_txq_get(struct rte_eth_dev *dev, uint16_t idx)
{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_data *txq_data = (*priv->txqs)[idx];
struct mlx5_txq_ctrl *ctrl = NULL;
- if ((*priv->txqs)[idx]) {
- ctrl = container_of((*priv->txqs)[idx], struct mlx5_txq_ctrl,
- txq);
- unsigned int i;
-
- mlx5_priv_txq_ibv_get(priv, idx);
- for (i = 0; i != MLX5_PMD_TX_MP_CACHE; ++i) {
- struct mlx5_mr *mr = NULL;
-
- (void)mr;
- if (ctrl->txq.mp2mr[i]) {
- mr = priv_mr_get(priv, ctrl->txq.mp2mr[i]->mp);
- assert(mr);
- }
- }
- rte_atomic32_inc(&ctrl->refcnt);
- DEBUG("%p: Tx queue %p: refcnt %d", (void *)priv,
- (void *)ctrl, rte_atomic32_read(&ctrl->refcnt));
+ if (txq_data) {
+ ctrl = container_of(txq_data, struct mlx5_txq_ctrl, txq);
+ __atomic_fetch_add(&ctrl->refcnt, 1, __ATOMIC_RELAXED);
}
return ctrl;
}
/**
* Release a Tx queue.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param idx
* TX queue index.
*
* @return
- * 0 on success, errno on failure.
+ * 1 while a reference on it exists, 0 when freed.
*/
int
-mlx5_priv_txq_release(struct priv *priv, uint16_t idx)
+mlx5_txq_release(struct rte_eth_dev *dev, uint16_t idx)
{
- unsigned int i;
- struct mlx5_txq_ctrl *txq;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_ctrl *txq_ctrl;
- if (!(*priv->txqs)[idx])
+ if (priv->txqs == NULL || (*priv->txqs)[idx] == NULL)
return 0;
- txq = container_of((*priv->txqs)[idx], struct mlx5_txq_ctrl, txq);
- DEBUG("%p: Tx queue %p: refcnt %d", (void *)priv,
- (void *)txq, rte_atomic32_read(&txq->refcnt));
- if (txq->ibv) {
- int ret;
-
- ret = mlx5_priv_txq_ibv_release(priv, txq->ibv);
- if (!ret)
- txq->ibv = NULL;
- }
- for (i = 0; i != MLX5_PMD_TX_MP_CACHE; ++i) {
- if (txq->txq.mp2mr[i]) {
- priv_mr_release(priv, txq->txq.mp2mr[i]);
- txq->txq.mp2mr[i] = NULL;
+ txq_ctrl = container_of((*priv->txqs)[idx], struct mlx5_txq_ctrl, txq);
+ if (__atomic_sub_fetch(&txq_ctrl->refcnt, 1, __ATOMIC_RELAXED) > 1)
+ return 1;
+ if (txq_ctrl->obj) {
+ priv->obj_ops.txq_obj_release(txq_ctrl->obj);
+ LIST_REMOVE(txq_ctrl->obj, next);
+ mlx5_free(txq_ctrl->obj);
+ txq_ctrl->obj = NULL;
+ }
+ if (txq_ctrl->type == MLX5_TXQ_TYPE_STANDARD) {
+ if (txq_ctrl->txq.fcqs) {
+ mlx5_free(txq_ctrl->txq.fcqs);
+ txq_ctrl->txq.fcqs = NULL;
}
+ txq_free_elts(txq_ctrl);
+ dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STOPPED;
}
- if (rte_atomic32_dec_and_test(&txq->refcnt)) {
- txq_free_elts(txq);
- LIST_REMOVE(txq, next);
- rte_free(txq);
+ if (!__atomic_load_n(&txq_ctrl->refcnt, __ATOMIC_RELAXED)) {
+ if (txq_ctrl->type == MLX5_TXQ_TYPE_STANDARD)
+ mlx5_mr_btree_free(&txq_ctrl->txq.mr_ctrl.cache_bh);
+ LIST_REMOVE(txq_ctrl, next);
+ mlx5_free(txq_ctrl);
(*priv->txqs)[idx] = NULL;
- return 0;
}
- return EBUSY;
+ return 0;
}
/**
* Verify if the queue can be released.
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
* @param idx
* TX queue index.
*
* 1 if the queue can be released.
*/
int
-mlx5_priv_txq_releasable(struct priv *priv, uint16_t idx)
+mlx5_txq_releasable(struct rte_eth_dev *dev, uint16_t idx)
{
+ struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_txq_ctrl *txq;
if (!(*priv->txqs)[idx])
return -1;
txq = container_of((*priv->txqs)[idx], struct mlx5_txq_ctrl, txq);
- return (rte_atomic32_read(&txq->refcnt) == 1);
+ return (__atomic_load_n(&txq->refcnt, __ATOMIC_RELAXED) == 1);
}
/**
* Verify the Tx Queue list is empty
*
- * @param priv
- * Pointer to private structure.
+ * @param dev
+ * Pointer to Ethernet device.
*
- * @return the number of object not released.
+ * @return
+ * The number of object not released.
*/
int
-mlx5_priv_txq_verify(struct priv *priv)
+mlx5_txq_verify(struct rte_eth_dev *dev)
{
- struct mlx5_txq_ctrl *txq;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_txq_ctrl *txq_ctrl;
int ret = 0;
- LIST_FOREACH(txq, &priv->txqsctrl, next) {
- DEBUG("%p: Tx Queue %p still referenced", (void *)priv,
- (void *)txq);
+ LIST_FOREACH(txq_ctrl, &priv->txqsctrl, next) {
+ DRV_LOG(DEBUG, "port %u Tx queue %u still referenced",
+ dev->data->port_id, txq_ctrl->txq.idx);
++ret;
}
return ret;
}
+
+/**
+ * Set the Tx queue dynamic timestamp (mask and offset)
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ */
+void
+mlx5_txq_dynf_timestamp_set(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_ctx_shared *sh = priv->sh;
+ struct mlx5_txq_data *data;
+ int off, nbit;
+ unsigned int i;
+ uint64_t mask = 0;
+
+ nbit = rte_mbuf_dynflag_lookup
+ (RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME, NULL);
+ off = rte_mbuf_dynfield_lookup
+ (RTE_MBUF_DYNFIELD_TIMESTAMP_NAME, NULL);
+ if (nbit >= 0 && off >= 0 && sh->txpp.refcnt)
+ mask = 1ULL << nbit;
+ for (i = 0; i != priv->txqs_n; ++i) {
+ data = (*priv->txqs)[i];
+ if (!data)
+ continue;
+ data->sh = sh;
+ data->ts_mask = mask;
+ data->ts_offset = off;
+ }
+}