net/mlx5: create advanced RxQ via DevX
[dpdk.git] / drivers / net / mlx5 / mlx5_vlan.c
index 3246c0a..5f6554a 100644 (file)
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: BSD-3-Clause
  * Copyright 2015 6WIND S.A.
- * Copyright 2015 Mellanox.
+ * Copyright 2015 Mellanox Technologies, Ltd
  */
 
 #include <stddef.h>
@@ -8,6 +8,12 @@
 #include <assert.h>
 #include <stdint.h>
 
+/*
+ * Not needed by this file; included to work around the lack of off_t
+ * definition for mlx5dv.h with unpatched rdma-core versions.
+ */
+#include <sys/types.h>
+
 /* Verbs headers do not support -pedantic. */
 #ifdef PEDANTIC
 #pragma GCC diagnostic ignored "-Wpedantic"
 #include <rte_ethdev_driver.h>
 #include <rte_common.h>
 
-#include "mlx5_utils.h"
 #include "mlx5.h"
 #include "mlx5_autoconf.h"
 #include "mlx5_glue.h"
+#include "mlx5_rxtx.h"
+#include "mlx5_utils.h"
 
 /**
  * DPDK callback to configure a VLAN filter.
 int
 mlx5_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 {
-       struct priv *priv = dev->data->dev_private;
+       struct mlx5_priv *priv = dev->data->dev_private;
        unsigned int i;
 
-       DEBUG("%p: %s VLAN filter ID %" PRIu16,
-             (void *)dev, (on ? "enable" : "disable"), vlan_id);
+       DRV_LOG(DEBUG, "port %u %s VLAN filter ID %" PRIu16,
+               dev->data->port_id, (on ? "enable" : "disable"), vlan_id);
        assert(priv->vlan_filter_n <= RTE_DIM(priv->vlan_filter));
        for (i = 0; (i != priv->vlan_filter_n); ++i)
                if (priv->vlan_filter[i] == vlan_id)
@@ -96,7 +103,7 @@ out:
 void
 mlx5_vlan_strip_queue_set(struct rte_eth_dev *dev, uint16_t queue, int on)
 {
-       struct priv *priv = dev->data->dev_private;
+       struct mlx5_priv *priv = dev->data->dev_private;
        struct mlx5_rxq_data *rxq = (*priv->rxqs)[queue];
        struct mlx5_rxq_ctrl *rxq_ctrl =
                container_of(rxq, struct mlx5_rxq_ctrl, rxq);
@@ -104,34 +111,48 @@ mlx5_vlan_strip_queue_set(struct rte_eth_dev *dev, uint16_t queue, int on)
        uint16_t vlan_offloads =
                (on ? IBV_WQ_FLAGS_CVLAN_STRIPPING : 0) |
                0;
-       int ret;
+       int ret = 0;
 
        /* Validate hw support */
        if (!priv->config.hw_vlan_strip) {
-               ERROR("VLAN stripping is not supported");
+               DRV_LOG(ERR, "port %u VLAN stripping is not supported",
+                       dev->data->port_id);
                return;
        }
        /* Validate queue number */
        if (queue >= priv->rxqs_n) {
-               ERROR("VLAN stripping, invalid queue number %d", queue);
+               DRV_LOG(ERR, "port %u VLAN stripping, invalid queue number %d",
+                       dev->data->port_id, queue);
                return;
        }
-       DEBUG("set VLAN offloads 0x%x for port %d queue %d",
-             vlan_offloads, rxq->port_id, queue);
-       if (!rxq_ctrl->ibv) {
+       DRV_LOG(DEBUG, "port %u set VLAN offloads 0x%x for port %uqueue %d",
+               dev->data->port_id, vlan_offloads, rxq->port_id, queue);
+       if (!rxq_ctrl->obj) {
                /* Update related bits in RX queue. */
                rxq->vlan_strip = !!on;
                return;
        }
-       mod = (struct ibv_wq_attr){
-               .attr_mask = IBV_WQ_ATTR_FLAGS,
-               .flags_mask = IBV_WQ_FLAGS_CVLAN_STRIPPING,
-               .flags = vlan_offloads,
-       };
-       ret = mlx5_glue->modify_wq(rxq_ctrl->ibv->wq, &mod);
+       if (rxq_ctrl->obj->type == MLX5_RXQ_OBJ_TYPE_IBV) {
+               mod = (struct ibv_wq_attr){
+                       .attr_mask = IBV_WQ_ATTR_FLAGS,
+                       .flags_mask = IBV_WQ_FLAGS_CVLAN_STRIPPING,
+                       .flags = vlan_offloads,
+               };
+               ret = mlx5_glue->modify_wq(rxq_ctrl->obj->wq, &mod);
+       } else if (rxq_ctrl->obj->type == MLX5_RXQ_OBJ_TYPE_DEVX_RQ) {
+               struct mlx5_devx_modify_rq_attr rq_attr;
+
+               memset(&rq_attr, 0, sizeof(rq_attr));
+               rq_attr.rq_state = MLX5_RQC_STATE_RDY;
+               rq_attr.state = MLX5_RQC_STATE_RDY;
+               rq_attr.vsd = (on ? 0 : 1);
+               rq_attr.modify_bitmask = MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_VSD;
+               ret = mlx5_devx_cmd_modify_rq(rxq_ctrl->obj->rq, &rq_attr);
+       }
        if (ret) {
-               ERROR("%p: failed to modified stripping mode: %s",
-                     (void *)dev, strerror(rte_errno));
+               DRV_LOG(ERR, "port %u failed to modify object %d stripping "
+                       "mode: %s", dev->data->port_id,
+                       rxq_ctrl->obj->type, strerror(rte_errno));
                return;
        }
        /* Update related bits in RX queue. */
@@ -152,7 +173,7 @@ mlx5_vlan_strip_queue_set(struct rte_eth_dev *dev, uint16_t queue, int on)
 int
 mlx5_vlan_offload_set(struct rte_eth_dev *dev, int mask)
 {
-       struct priv *priv = dev->data->dev_private;
+       struct mlx5_priv *priv = dev->data->dev_private;
        unsigned int i;
 
        if (mask & ETH_VLAN_STRIP_MASK) {
@@ -160,7 +181,8 @@ mlx5_vlan_offload_set(struct rte_eth_dev *dev, int mask)
                                       DEV_RX_OFFLOAD_VLAN_STRIP);
 
                if (!priv->config.hw_vlan_strip) {
-                       ERROR("VLAN stripping is not supported");
+                       DRV_LOG(ERR, "port %u VLAN stripping is not supported",
+                               dev->data->port_id);
                        return 0;
                }
                /* Run on every RX queue and set/reset VLAN stripping. */