/* Parsing tokens. Defined conveniently, so that any correction is easy. */
#define MRVL_TOK_DEFAULT "default"
#define MRVL_TOK_DSA_MODE "dsa_mode"
-#define MRVL_TOK_DSA_MODE_NONE "none"
-#define MRVL_TOK_DSA_MODE_DSA "dsa"
-#define MRVL_TOK_DSA_MODE_EXT_DSA "ext_dsa"
+#define MRVL_TOK_START_HDR "start_hdr"
+#define MRVL_TOK_START_HDR_NONE "none"
+#define MRVL_TOK_START_HDR_DSA "dsa"
+#define MRVL_TOK_START_HDR_CUSTOM "custom"
+#define MRVL_TOK_START_HDR_EXT_DSA "ext_dsa"
#define MRVL_TOK_DEFAULT_TC "default_tc"
#define MRVL_TOK_DSCP "dscp"
#define MRVL_TOK_MAPPING_PRIORITY "mapping_priority"
#define MRVL_TOK_TXQ "txq"
#define MRVL_TOK_VLAN "vlan"
#define MRVL_TOK_VLAN_IP "vlan/ip"
+#define MRVL_TOK_PARSER_UDF "parser udf"
/* egress specific configuration tokens */
#define MRVL_TOK_BURST_SIZE "burst_size"
#define MRVL_TOK_PLCR_DEFAULT_COLOR_YELLOW "yellow"
#define MRVL_TOK_PLCR_DEFAULT_COLOR_RED "red"
+/* parser udf specific configuration tokens */
+#define MRVL_TOK_PARSER_UDF_PROTO "proto"
+#define MRVL_TOK_PARSER_UDF_FIELD "field"
+#define MRVL_TOK_PARSER_UDF_KEY "key"
+#define MRVL_TOK_PARSER_UDF_MASK "mask"
+#define MRVL_TOK_PARSER_UDF_OFFSET "offset"
+#define MRVL_TOK_PARSER_UDF_PROTO_ETH "eth"
+#define MRVL_TOK_PARSER_UDF_FIELD_ETH_TYPE "type"
+#define MRVL_TOK_PARSER_UDF_PROTO_UDP "udp"
+#define MRVL_TOK_PARSER_UDF_FIELD_UDP_DPORT "dport"
+
+/* parser forward bad frames tokens */
+#define MRVL_TOK_FWD_BAD_FRAMES "forward_bad_frames"
+
+/* parse fill bpool buffers tokens */
+#define MRVL_TOK_FILL_BPOOL_BUFFS "fill_bpool_buffs"
+
/** Number of tokens in range a-b = 2. */
#define MAX_RNG_TOKENS 2
}
/**
- * Parse Traffic Class'es mapping configuration.
+ * Parse Traffic Classes mapping configuration.
*
* @param file Config file handle.
* @param port Which port to look for.
if (rte_cfgfile_num_sections(file, sec_name, strlen(sec_name)) <= 0)
return 0;
- cfg->port[port].use_global_defaults = 0;
+ cfg->port[port].use_qos_global_defaults = 0;
entry = rte_cfgfile_get_entry(file, sec_name, MRVL_TOK_RXQ);
if (entry) {
n = get_entry_values(entry,
return 0;
}
+/**
+ * Parse parser udf.
+ *
+ * @param file Config file handle.
+ * @param sec_name section name
+ * @param udf udf index
+ * @param cfg[out] Parsing results.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+parse_udf(struct rte_cfgfile *file, const char *sec_name, int udf,
+ struct mrvl_cfg *cfg)
+{
+ struct pp2_parse_udf_params *udf_params;
+ const char *entry, *entry_field;
+ uint32_t val, i;
+ uint8_t field_size;
+ char malloc_name[32], tmp_arr[3];
+ /* field len in chars equal to '0x' + rest of data */
+#define FIELD_LEN_IN_CHARS(field_size) (uint32_t)(2 + (field_size) * 2)
+
+ udf_params = &cfg->pp2_cfg.prs_udfs.udfs[udf];
+
+ /* Read 'proto' field */
+ entry = rte_cfgfile_get_entry(file, sec_name,
+ MRVL_TOK_PARSER_UDF_PROTO);
+ if (!entry) {
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set\n", udf,
+ MRVL_TOK_PARSER_UDF_PROTO);
+ return -1;
+ }
+
+ /* Read 'field' field */
+ entry_field = rte_cfgfile_get_entry(file, sec_name,
+ MRVL_TOK_PARSER_UDF_FIELD);
+ if (!entry_field) {
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set\n", udf,
+ MRVL_TOK_PARSER_UDF_FIELD);
+ return -1;
+ }
+
+ if (!strncmp(entry, MRVL_TOK_PARSER_UDF_PROTO_ETH,
+ sizeof(MRVL_TOK_PARSER_UDF_PROTO_ETH))) {
+ udf_params->match_proto = MV_NET_PROTO_ETH;
+ if (!strncmp(entry_field, MRVL_TOK_PARSER_UDF_FIELD_ETH_TYPE,
+ sizeof(MRVL_TOK_PARSER_UDF_FIELD_ETH_TYPE))) {
+ udf_params->match_field.eth = MV_NET_ETH_F_TYPE;
+ field_size = 2;
+ } else {
+ MRVL_LOG(ERR, "UDF[%d]: mismatch between '%s' proto "
+ "and '%s' field\n", udf,
+ MRVL_TOK_PARSER_UDF_PROTO_ETH,
+ entry_field);
+ return -1;
+ }
+ } else if (!strncmp(entry, MRVL_TOK_PARSER_UDF_PROTO_UDP,
+ sizeof(MRVL_TOK_PARSER_UDF_PROTO_UDP))) {
+ udf_params->match_proto = MV_NET_PROTO_UDP;
+ if (!strncmp(entry_field, MRVL_TOK_PARSER_UDF_FIELD_UDP_DPORT,
+ sizeof(MRVL_TOK_PARSER_UDF_FIELD_UDP_DPORT))) {
+ udf_params->match_field.udp = MV_NET_UDP_F_DP;
+ field_size = 2;
+ } else {
+ MRVL_LOG(ERR, "UDF[%d]: mismatch between '%s' proto "
+ "and '%s' field\n", udf,
+ MRVL_TOK_PARSER_UDF_PROTO_UDP,
+ entry_field);
+ return -1;
+ }
+ } else {
+ MRVL_LOG(ERR, "UDF[%d]: Unsupported '%s' proto\n", udf, entry);
+ return -1;
+ }
+
+ snprintf(malloc_name, sizeof(malloc_name), "mrvl_udf_%d_key", udf);
+ udf_params->match_key = rte_zmalloc(malloc_name, field_size, 0);
+ if (udf_params->match_key == NULL) {
+ MRVL_LOG(ERR, "Cannot allocate udf %d key\n", udf);
+ return -1;
+ }
+ snprintf(malloc_name, sizeof(malloc_name), "mrvl_udf_%d_mask", udf);
+ udf_params->match_mask = rte_zmalloc(malloc_name, field_size, 0);
+ if (udf_params->match_mask == NULL) {
+ MRVL_LOG(ERR, "Cannot allocate udf %d mask\n", udf);
+ return -1;
+ }
+
+ /* Read 'key' field */
+ entry = rte_cfgfile_get_entry(file, sec_name, MRVL_TOK_PARSER_UDF_KEY);
+ if (!entry) {
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set\n", udf,
+ MRVL_TOK_PARSER_UDF_KEY);
+ return -1;
+ }
+
+ if (strncmp(entry, "0x", 2) != 0) {
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field must start with '0x'\n",
+ udf, MRVL_TOK_PARSER_UDF_KEY);
+ return -EINVAL;
+ }
+
+ if (strlen(entry) != FIELD_LEN_IN_CHARS(field_size)) {
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field's len must be %d\n", udf,
+ MRVL_TOK_PARSER_UDF_KEY,
+ FIELD_LEN_IN_CHARS(field_size));
+ return -EINVAL;
+ }
+
+ entry += 2; /* skip the '0x' */
+ for (i = 0; i < field_size; i++) {
+ strncpy(tmp_arr, entry, 2);
+ tmp_arr[2] = '\0';
+ if (get_val_securely8(tmp_arr, 16,
+ &udf_params->match_key[i]) < 0) {
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field's value is not in "
+ "hex format\n", udf, MRVL_TOK_PARSER_UDF_KEY);
+ return -EINVAL;
+ }
+ entry += 2;
+ }
+
+ /* Read 'mask' field */
+ entry = rte_cfgfile_get_entry(file, sec_name, MRVL_TOK_PARSER_UDF_MASK);
+ if (!entry) {
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set\n", udf,
+ MRVL_TOK_PARSER_UDF_MASK);
+ return -1;
+ }
+ if (strncmp(entry, "0x", 2) != 0) {
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field must start with '0x'\n",
+ udf, MRVL_TOK_PARSER_UDF_MASK);
+ return -EINVAL;
+ }
+
+ if (strlen(entry) != FIELD_LEN_IN_CHARS(field_size)) {
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field's len must be %d\n", udf,
+ MRVL_TOK_PARSER_UDF_MASK,
+ FIELD_LEN_IN_CHARS(field_size));
+ return -EINVAL;
+ }
+
+ entry += 2; /* skip the '0x' */
+ for (i = 0; i < field_size; i++) {
+ strncpy(tmp_arr, entry, 2);
+ tmp_arr[2] = '\0';
+ if (get_val_securely8(tmp_arr, 16,
+ &udf_params->match_mask[i]) < 0) {
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field's value is not in "
+ "hex format\n", udf, MRVL_TOK_PARSER_UDF_MASK);
+ return -EINVAL;
+ }
+ entry += 2;
+ }
+
+ /* Read offset */
+ entry = rte_cfgfile_get_entry(file, sec_name,
+ MRVL_TOK_PARSER_UDF_OFFSET);
+ if (!entry) {
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set\n", udf,
+ MRVL_TOK_PARSER_UDF_OFFSET);
+ return -1;
+ }
+ if (get_val_securely(entry, &val) < 0)
+ return -1;
+ udf_params->offset = val;
+
+ return 0;
+}
+
/**
* Parse configuration - rte_kvargs_process handler.
*
return -1;
}
+ /* PP2 configuration */
+ n = rte_cfgfile_num_sections(file, MRVL_TOK_PARSER_UDF,
+ sizeof(MRVL_TOK_PARSER_UDF) - 1);
+
+ if (n && n > PP2_MAX_UDFS_SUPPORTED) {
+ MRVL_LOG(ERR, "found %d udf sections, but only %d are supported\n",
+ n, PP2_MAX_UDFS_SUPPORTED);
+ return -1;
+ }
+ (*cfg)->pp2_cfg.prs_udfs.num_udfs = n;
+ for (i = 0; i < n; i++) {
+ snprintf(sec_name, sizeof(sec_name), "%s %d",
+ MRVL_TOK_PARSER_UDF, i);
+
+ /* udf sections must be sequential. */
+ if (rte_cfgfile_num_sections(file, sec_name,
+ strlen(sec_name)) <= 0) {
+ MRVL_LOG(ERR, "udf sections must be sequential (0 - %d)\n",
+ PP2_MAX_UDFS_SUPPORTED - 1);
+ return -1;
+ }
+
+ ret = parse_udf(file, sec_name, i, *cfg);
+ if (ret) {
+ MRVL_LOG(ERR, "Error in parsing %s!\n", sec_name);
+ return -1;
+ }
+ }
+
+ /* PP2 Ports configuration */
n = rte_cfgfile_num_sections(file, MRVL_TOK_PORT,
sizeof(MRVL_TOK_PORT) - 1);
MRVL_TOK_PORT, n, MRVL_TOK_DEFAULT);
/* Use global defaults, unless an override occurs */
- (*cfg)->port[n].use_global_defaults = 1;
+ (*cfg)->port[n].use_qos_global_defaults = 1;
+
+ /* Set non-zero defaults before the decision to continue to next
+ * port or to parse the port section in config file
+ */
+ (*cfg)->port[n].fill_bpool_buffs = MRVL_BURST_SIZE;
/* Skip ports non-existing in configuration. */
if (rte_cfgfile_num_sections(file, sec_name,
continue;
}
+ /* MRVL_TOK_START_HDR replaces MRVL_TOK_DSA_MODE parameter.
+ * MRVL_TOK_DSA_MODE will be supported for backward
+ * compatibility.
+ */
entry = rte_cfgfile_get_entry(file, sec_name,
+ MRVL_TOK_START_HDR);
+ /* if start_hsr is missing, check if dsa_mode exist instead */
+ if (entry == NULL)
+ entry = rte_cfgfile_get_entry(file, sec_name,
MRVL_TOK_DSA_MODE);
if (entry) {
- if (!strncmp(entry, MRVL_TOK_DSA_MODE_NONE,
- sizeof(MRVL_TOK_DSA_MODE_NONE)))
+ if (!strncmp(entry, MRVL_TOK_START_HDR_NONE,
+ sizeof(MRVL_TOK_START_HDR_NONE)))
(*cfg)->port[n].eth_start_hdr =
PP2_PPIO_HDR_ETH;
- else if (!strncmp(entry, MRVL_TOK_DSA_MODE_DSA,
- sizeof(MRVL_TOK_DSA_MODE_DSA)))
+ else if (!strncmp(entry, MRVL_TOK_START_HDR_DSA,
+ sizeof(MRVL_TOK_START_HDR_DSA)))
(*cfg)->port[n].eth_start_hdr =
PP2_PPIO_HDR_ETH_DSA;
- else if (!strncmp(entry, MRVL_TOK_DSA_MODE_EXT_DSA,
- sizeof(MRVL_TOK_DSA_MODE_EXT_DSA))) {
+ else if (!strncmp(entry, MRVL_TOK_START_HDR_CUSTOM,
+ sizeof(MRVL_TOK_START_HDR_CUSTOM)))
+ (*cfg)->port[n].eth_start_hdr =
+ PP2_PPIO_HDR_ETH_CUSTOM;
+ else if (!strncmp(entry, MRVL_TOK_START_HDR_EXT_DSA,
+ sizeof(MRVL_TOK_START_HDR_EXT_DSA))) {
(*cfg)->port[n].eth_start_hdr =
PP2_PPIO_HDR_ETH_EXT_DSA;
} else {
MRVL_LOG(ERR,
"Error in parsing %s value (%s)!\n",
- MRVL_TOK_DSA_MODE, entry);
+ MRVL_TOK_START_HDR, entry);
return -1;
}
} else {
entry = rte_cfgfile_get_entry(file, sec_name,
MRVL_TOK_MAPPING_PRIORITY);
if (entry) {
- (*cfg)->port[n].use_global_defaults = 0;
+ (*cfg)->port[n].use_qos_global_defaults = 0;
if (!strncmp(entry, MRVL_TOK_VLAN_IP,
sizeof(MRVL_TOK_VLAN_IP)))
(*cfg)->port[n].mapping_priority =
entry = rte_cfgfile_get_entry(file, sec_name,
MRVL_TOK_PLCR_DEFAULT);
if (entry) {
- (*cfg)->port[n].use_global_defaults = 0;
+ (*cfg)->port[n].use_qos_global_defaults = 0;
if (get_val_securely(entry, &val) < 0)
return -1;
return -1;
(*cfg)->port[n].default_tc = (uint8_t)val;
} else {
- if ((*cfg)->port[n].use_global_defaults == 0) {
+ if ((*cfg)->port[n].use_qos_global_defaults == 0) {
MRVL_LOG(ERR,
"Default Traffic Class required in "
"custom configuration!");
return -1;
}
}
+
+ /* Parse forward bad frames option */
+ entry = rte_cfgfile_get_entry(file, sec_name,
+ MRVL_TOK_FWD_BAD_FRAMES);
+ if (entry) {
+ if (get_val_securely(entry, &val) < 0) {
+ MRVL_LOG(ERR,
+ "Error in parsing %s value (%s)!\n",
+ MRVL_TOK_FWD_BAD_FRAMES, entry);
+ return -1;
+ }
+ (*cfg)->port[n].forward_bad_frames = (uint8_t)val;
+ } else {
+ (*cfg)->port[n].forward_bad_frames = 0;
+ }
+
+ /* Parse fill bpool buffs option */
+ entry = rte_cfgfile_get_entry(file, sec_name,
+ MRVL_TOK_FILL_BPOOL_BUFFS);
+ if (entry) {
+ if (get_val_securely(entry, &val) < 0) {
+ MRVL_LOG(ERR,
+ "Error in parsing %s value (%s)!\n",
+ MRVL_TOK_FILL_BPOOL_BUFFS, entry);
+ return -1;
+ }
+ (*cfg)->port[n].fill_bpool_buffs = val;
+ }
}
return 0;
param->pkt_offset = MRVL_PKT_OFFS;
param->pools[0][0] = bpool;
+ param->pools[0][1] = dummy_pool[bpool->pp2_id];
param->default_color = color;
inq_params = rte_zmalloc_socket("inq_params",
param->num_in_qs = inqs;
/* Release old config if necessary. */
- if (param->inqs_params)
- rte_free(param->inqs_params);
+ rte_free(param->inqs_params);
param->inqs_params = inq_params;
size_t i, tc;
if (mrvl_cfg == NULL ||
- mrvl_cfg->port[portid].use_global_defaults) {
+ mrvl_cfg->port[portid].use_qos_global_defaults) {
/*
* No port configuration, use default: 1 TC, no QoS,
* TC color set to green.