return -EINVAL;
}
- /* Checking RX offloads */
- if (!(rxmode->offloads & DEV_RX_OFFLOAD_CRC_STRIP))
- PMD_INIT_LOG(INFO, "HW does strip CRC. No configurable!");
-
return 0;
}
/* switch to jumbo mode if needed */
if ((uint32_t)mtu > ETHER_MAX_LEN)
- dev->data->dev_conf.rxmode.jumbo_frame = 1;
+ dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
else
- dev->data->dev_conf.rxmode.jumbo_frame = 0;
+ dev->data->dev_conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
/* update max frame size */
dev->data->dev_conf.rxmode.max_rx_pkt_len = (uint32_t)mtu;
txq->wr_p = 0;
pkt_size -= dma_size;
- if (!pkt_size)
- /* End of packet */
- txds->offset_eop |= PCIE_DESC_TX_EOP;
+
+ /*
+ * Making the EOP, packets with just one segment
+ * the priority
+ */
+ if (likely(!pkt_size))
+ txds->offset_eop = PCIE_DESC_TX_EOP;
else
- txds->offset_eop &= PCIE_DESC_TX_OFFSET_MASK;
+ txds->offset_eop = 0;
pkt = pkt->next;
/* Referencing next free TX descriptor */
ether_addr_copy((struct ether_addr *)hw->mac_addr,
ð_dev->data->mac_addrs[0]);
+ if (!(hw->cap & NFP_NET_CFG_CTRL_LIVE_ADDR))
+ eth_dev->data->dev_flags |= RTE_ETH_DEV_NOLIVE_MAC_ADDR;
+
PMD_INIT_LOG(INFO, "port %d VendorID=0x%x DeviceID=0x%x "
"mac=%02x:%02x:%02x:%02x:%02x:%02x",
eth_dev->data->port_id, pci_dev->id.vendor_id,
if (!dev)
return ret;
- cpp = nfp_cpp_from_device_name(dev->device.name);
+ /*
+ * When device bound to UIO, the device could be used, by mistake,
+ * by two DPDK apps, and the UIO driver does not avoid it. This
+ * could lead to a serious problem when configuring the NFP CPP
+ * interface. Here we avoid this telling to the CPP init code to
+ * use a lock file if UIO is being used.
+ */
+ if (dev->kdrv == RTE_KDRV_VFIO)
+ cpp = nfp_cpp_from_device_name(dev, 0);
+ else
+ cpp = nfp_cpp_from_device_name(dev, 1);
+
if (!cpp) {
PMD_DRV_LOG(ERR, "A CPP handle can not be obtained");
ret = -EIO;
RTE_PMD_REGISTER_KMOD_DEP(net_nfp_pf, "* igb_uio | uio_pci_generic | vfio");
RTE_PMD_REGISTER_KMOD_DEP(net_nfp_vf, "* igb_uio | uio_pci_generic | vfio");
-RTE_INIT(nfp_init_log);
-static void
-nfp_init_log(void)
+RTE_INIT(nfp_init_log)
{
nfp_logtype_init = rte_log_register("pmd.net.nfp.init");
if (nfp_logtype_init >= 0)