-/*
+/* SPDX-License-Identifier: BSD-3-Clause
* Copyright (c) 2014-2018 Netronome Systems, Inc.
* All rights reserved.
*
* Small portions derived from code Copyright(c) 2010-2015 Intel Corporation.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution
- *
- * 3. Neither the name of the copyright holder nor the names of its
- * contributors may be used to endorse or promote products derived from this
- * software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
*/
/*
#include <rte_common.h>
#include <rte_log.h>
#include <rte_debug.h>
-#include <rte_ethdev_driver.h>
-#include <rte_ethdev_pci.h>
+#include <ethdev_driver.h>
+#include <ethdev_pci.h>
#include <rte_dev.h>
#include <rte_ether.h>
#include <rte_malloc.h>
#include <rte_string_fns.h>
#include <rte_alarm.h>
#include <rte_spinlock.h>
+#include <rte_service_component.h>
#include "nfpcore/nfp_cpp.h"
#include "nfpcore/nfp_nffw.h"
#include "nfp_net_logs.h"
#include "nfp_net_ctrl.h"
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <sys/ioctl.h>
+#include <errno.h>
+
/* Prototypes */
-static void nfp_net_close(struct rte_eth_dev *dev);
+static int nfp_net_close(struct rte_eth_dev *dev);
static int nfp_net_configure(struct rte_eth_dev *dev);
static void nfp_net_dev_interrupt_handler(void *param);
static void nfp_net_dev_interrupt_delayed_handler(void *param);
static int nfp_net_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
-static void nfp_net_infos_get(struct rte_eth_dev *dev,
- struct rte_eth_dev_info *dev_info);
+static int nfp_net_infos_get(struct rte_eth_dev *dev,
+ struct rte_eth_dev_info *dev_info);
static int nfp_net_init(struct rte_eth_dev *eth_dev);
+static int nfp_pf_init(struct rte_eth_dev *eth_dev);
+static int nfp_pci_uninit(struct rte_eth_dev *eth_dev);
+static int nfp_init_phyports(struct nfp_pf_dev *pf_dev);
static int nfp_net_link_update(struct rte_eth_dev *dev, int wait_to_complete);
-static void nfp_net_promisc_enable(struct rte_eth_dev *dev);
-static void nfp_net_promisc_disable(struct rte_eth_dev *dev);
+static int nfp_net_promisc_enable(struct rte_eth_dev *dev);
+static int nfp_net_promisc_disable(struct rte_eth_dev *dev);
static int nfp_net_rx_fill_freelist(struct nfp_net_rxq *rxq);
static uint32_t nfp_net_rx_queue_count(struct rte_eth_dev *dev,
uint16_t queue_idx);
static int nfp_net_start(struct rte_eth_dev *dev);
static int nfp_net_stats_get(struct rte_eth_dev *dev,
struct rte_eth_stats *stats);
-static void nfp_net_stats_reset(struct rte_eth_dev *dev);
-static void nfp_net_stop(struct rte_eth_dev *dev);
+static int nfp_net_stats_reset(struct rte_eth_dev *dev);
+static int nfp_net_stop(struct rte_eth_dev *dev);
static uint16_t nfp_net_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
uint16_t nb_pkts);
static int nfp_net_rss_hash_write(struct rte_eth_dev *dev,
struct rte_eth_rss_conf *rss_conf);
static int nfp_set_mac_addr(struct rte_eth_dev *dev,
- struct ether_addr *mac_addr);
+ struct rte_ether_addr *mac_addr);
+static int32_t nfp_cpp_bridge_service_func(void *args);
+static int nfp_fw_setup(struct rte_pci_device *dev,
+ struct nfp_cpp *cpp,
+ struct nfp_eth_table *nfp_eth_table,
+ struct nfp_hwinfo *hwinfo);
+
/* The offset of the queue controller queues in the PCIe Target */
#define NFP_PCIE_QUEUE(_q) (0x80000 + (NFP_QCP_QUEUE_ADDR_SZ * ((_q) & 0xff)))
rxmode = &dev_conf->rxmode;
txmode = &dev_conf->txmode;
+ if (rxmode->mq_mode & ETH_MQ_RX_RSS_FLAG)
+ rxmode->offloads |= DEV_RX_OFFLOAD_RSS_HASH;
+
/* Checking TX mode */
if (txmode->mq_mode) {
PMD_INIT_LOG(INFO, "TX mq_mode DCB and VMDq not supported");
return -EINVAL;
}
- /* Checking RX offloads */
- if (!(rxmode->offloads & DEV_RX_OFFLOAD_CRC_STRIP))
- PMD_INIT_LOG(INFO, "HW does strip CRC. No configurable!");
-
return 0;
}
}
static int
-nfp_net_pf_read_mac(struct nfp_net_hw *hw, int port)
+nfp_net_pf_read_mac(struct nfp_pf_dev *pf_dev, int port)
{
struct nfp_eth_table *nfp_eth_table;
+ struct nfp_net_hw *hw = NULL;
+
+ /* Grab a pointer to the correct physical port */
+ hw = pf_dev->ports[port];
+
+ nfp_eth_table = nfp_eth_read_ports(pf_dev->cpp);
- nfp_eth_table = nfp_eth_read_ports(hw->cpp);
- /*
- * hw points to port0 private data. We need hw now pointing to
- * right port.
- */
- hw += port;
nfp_eth_copy_mac((uint8_t *)&hw->mac_addr,
(uint8_t *)&nfp_eth_table->ports[port].mac_addr);
}
int
-nfp_set_mac_addr(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
+nfp_set_mac_addr(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr)
{
struct nfp_net_hw *hw;
uint32_t update, ctrl;
/* Signal the NIC about the change */
update = NFP_NET_CFG_UPDATE_MACADDR;
- ctrl = hw->ctrl | NFP_NET_CFG_CTRL_LIVE_ADDR;
+ ctrl = hw->ctrl;
+ if ((hw->ctrl & NFP_NET_CFG_CTRL_ENABLE) &&
+ (hw->cap & NFP_NET_CFG_CTRL_LIVE_ADDR))
+ ctrl |= NFP_NET_CFG_CTRL_LIVE_ADDR;
if (nfp_net_reconfig(hw, ctrl, update) < 0) {
PMD_INIT_LOG(INFO, "MAC address update failed");
return -EIO;
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
uint32_t new_ctrl, update = 0;
struct nfp_net_hw *hw;
+ struct nfp_pf_dev *pf_dev;
struct rte_eth_conf *dev_conf;
struct rte_eth_rxmode *rxmode;
uint32_t intr_vector;
int ret;
hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ pf_dev = NFP_NET_DEV_PRIVATE_TO_PF(dev->data->dev_private);
PMD_INIT_LOG(DEBUG, "Start");
/* check and configure queue intr-vector mapping */
if (dev->data->dev_conf.intr_conf.rxq != 0) {
- if (hw->pf_multiport_enabled) {
+ if (pf_dev->multiport) {
PMD_INIT_LOG(ERR, "PMD rx interrupt is not supported "
"with NFP multiport PF");
return -EINVAL;
return -EIO;
/*
- * Allocating rte mbuffs for configured rx queues.
+ * Allocating rte mbufs for configured rx queues.
* This requires queues being enabled before
*/
if (nfp_net_rx_freelist_setup(dev) < 0) {
goto error;
}
- if (hw->is_pf)
- /* Configure the physical port up */
- nfp_eth_set_configured(hw->cpp, hw->pf_port_idx, 1);
+ if (hw->is_phyport) {
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ /* Configure the physical port up */
+ nfp_eth_set_configured(hw->cpp, hw->nfp_idx, 1);
+ else
+ nfp_eth_set_configured(dev->process_private,
+ hw->nfp_idx, 1);
+ }
hw->ctrl = new_ctrl;
}
/* Stop device: disable rx and tx functions to allow for reconfiguring. */
-static void
+static int
nfp_net_stop(struct rte_eth_dev *dev)
{
int i;
(struct nfp_net_rxq *)dev->data->rx_queues[i]);
}
- if (hw->is_pf)
+ if (hw->is_phyport) {
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ /* Configure the physical port down */
+ nfp_eth_set_configured(hw->cpp, hw->nfp_idx, 0);
+ else
+ nfp_eth_set_configured(dev->process_private,
+ hw->nfp_idx, 0);
+ }
+
+ return 0;
+}
+
+/* Set the link up. */
+static int
+nfp_net_set_link_up(struct rte_eth_dev *dev)
+{
+ struct nfp_net_hw *hw;
+
+ PMD_DRV_LOG(DEBUG, "Set link up");
+
+ hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ if (!hw->is_phyport)
+ return -ENOTSUP;
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
/* Configure the physical port down */
- nfp_eth_set_configured(hw->cpp, hw->pf_port_idx, 0);
+ return nfp_eth_set_configured(hw->cpp, hw->nfp_idx, 1);
+ else
+ return nfp_eth_set_configured(dev->process_private,
+ hw->nfp_idx, 1);
+}
+
+/* Set the link down. */
+static int
+nfp_net_set_link_down(struct rte_eth_dev *dev)
+{
+ struct nfp_net_hw *hw;
+
+ PMD_DRV_LOG(DEBUG, "Set link down");
+
+ hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ if (!hw->is_phyport)
+ return -ENOTSUP;
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ /* Configure the physical port down */
+ return nfp_eth_set_configured(hw->cpp, hw->nfp_idx, 0);
+ else
+ return nfp_eth_set_configured(dev->process_private,
+ hw->nfp_idx, 0);
}
/* Reset and stop device. The device can not be restarted. */
-static void
+static int
nfp_net_close(struct rte_eth_dev *dev)
{
struct nfp_net_hw *hw;
struct rte_pci_device *pci_dev;
int i;
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+
PMD_INIT_LOG(DEBUG, "Close");
hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
(struct nfp_net_rxq *)dev->data->rx_queues[i]);
}
+ /* Only free PF resources after all physical ports have been closed */
+ if (pci_dev->id.device_id == PCI_DEVICE_ID_NFP4000_PF_NIC ||
+ pci_dev->id.device_id == PCI_DEVICE_ID_NFP6000_PF_NIC) {
+ struct nfp_pf_dev *pf_dev;
+ pf_dev = NFP_NET_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+
+ /* Mark this port as unused and free device priv resources*/
+ nn_cfg_writeb(hw, NFP_NET_CFG_LSC, 0xff);
+ pf_dev->ports[hw->idx] = NULL;
+ rte_eth_dev_release_port(dev);
+
+ for (i = 0; i < pf_dev->total_phyports; i++) {
+ /* Check to see if ports are still in use */
+ if (pf_dev->ports[i])
+ return 0;
+ }
+
+ /* Now it is safe to free all PF resources */
+ PMD_INIT_LOG(INFO, "Freeing PF resources");
+ nfp_cpp_area_free(pf_dev->ctrl_area);
+ nfp_cpp_area_free(pf_dev->hwqueues_area);
+ free(pf_dev->hwinfo);
+ free(pf_dev->sym_tbl);
+ nfp_cpp_free(pf_dev->cpp);
+ rte_free(pf_dev);
+ }
+
rte_intr_disable(&pci_dev->intr_handle);
- nn_cfg_writeb(hw, NFP_NET_CFG_LSC, 0xff);
/* unregister callback func from eal lib */
rte_intr_callback_unregister(&pci_dev->intr_handle,
* The ixgbe PMD driver disables the pcie master on the
* device. The i40e does not...
*/
+
+ return 0;
}
-static void
+static int
nfp_net_promisc_enable(struct rte_eth_dev *dev)
{
uint32_t new_ctrl, update = 0;
struct nfp_net_hw *hw;
+ int ret;
PMD_DRV_LOG(DEBUG, "Promiscuous mode enable");
if (!(hw->cap & NFP_NET_CFG_CTRL_PROMISC)) {
PMD_INIT_LOG(INFO, "Promiscuous mode not supported");
- return;
+ return -ENOTSUP;
}
if (hw->ctrl & NFP_NET_CFG_CTRL_PROMISC) {
PMD_DRV_LOG(INFO, "Promiscuous mode already enabled");
- return;
+ return 0;
}
new_ctrl = hw->ctrl | NFP_NET_CFG_CTRL_PROMISC;
* DPDK sets promiscuous mode on just after this call assuming
* it can not fail ...
*/
- if (nfp_net_reconfig(hw, new_ctrl, update) < 0)
- return;
+ ret = nfp_net_reconfig(hw, new_ctrl, update);
+ if (ret < 0)
+ return ret;
hw->ctrl = new_ctrl;
+
+ return 0;
}
-static void
+static int
nfp_net_promisc_disable(struct rte_eth_dev *dev)
{
uint32_t new_ctrl, update = 0;
struct nfp_net_hw *hw;
+ int ret;
hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
if ((hw->ctrl & NFP_NET_CFG_CTRL_PROMISC) == 0) {
PMD_DRV_LOG(INFO, "Promiscuous mode already disabled");
- return;
+ return 0;
}
new_ctrl = hw->ctrl & ~NFP_NET_CFG_CTRL_PROMISC;
* DPDK sets promiscuous mode off just before this call
* assuming it can not fail ...
*/
- if (nfp_net_reconfig(hw, new_ctrl, update) < 0)
- return;
+ ret = nfp_net_reconfig(hw, new_ctrl, update);
+ if (ret < 0)
+ return ret;
hw->ctrl = new_ctrl;
+
+ return 0;
}
/*
return -EINVAL;
}
-static void
+static int
nfp_net_stats_reset(struct rte_eth_dev *dev)
{
int i;
hw->eth_stats_base.imissed =
nn_cfg_readq(hw, NFP_NET_CFG_STATS_RX_DISCARDS);
+
+ return 0;
}
-static void
+static int
nfp_net_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
{
struct nfp_net_hw *hw;
dev_info->max_rx_queues = (uint16_t)hw->max_rx_queues;
dev_info->max_tx_queues = (uint16_t)hw->max_tx_queues;
- dev_info->min_rx_bufsize = ETHER_MIN_MTU;
+ dev_info->min_rx_bufsize = RTE_ETHER_MIN_MTU;
dev_info->max_rx_pktlen = hw->max_mtu;
/* Next should change when PF support is implemented */
dev_info->max_mac_addrs = 1;
DEV_RX_OFFLOAD_UDP_CKSUM |
DEV_RX_OFFLOAD_TCP_CKSUM;
- dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_JUMBO_FRAME;
-
if (hw->cap & NFP_NET_CFG_CTRL_TXVLAN)
dev_info->tx_offload_capa = DEV_TX_OFFLOAD_VLAN_INSERT;
.tx_rs_thresh = DEFAULT_TX_RSBIT_THRESH,
};
- dev_info->flow_type_rss_offloads = ETH_RSS_NONFRAG_IPV4_TCP |
- ETH_RSS_NONFRAG_IPV4_UDP |
- ETH_RSS_NONFRAG_IPV6_TCP |
- ETH_RSS_NONFRAG_IPV6_UDP;
+ dev_info->rx_desc_lim = (struct rte_eth_desc_lim) {
+ .nb_max = NFP_NET_MAX_RX_DESC,
+ .nb_min = NFP_NET_MIN_RX_DESC,
+ .nb_align = NFP_ALIGN_RING_DESC,
+ };
+
+ dev_info->tx_desc_lim = (struct rte_eth_desc_lim) {
+ .nb_max = NFP_NET_MAX_TX_DESC,
+ .nb_min = NFP_NET_MIN_TX_DESC,
+ .nb_align = NFP_ALIGN_RING_DESC,
+ .nb_seg_max = NFP_TX_MAX_SEG,
+ .nb_mtu_seg_max = NFP_TX_MAX_MTU_SEG,
+ };
+
+ /* All NFP devices support jumbo frames */
+ dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+
+ if (hw->cap & NFP_NET_CFG_CTRL_RSS) {
+ dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_RSS_HASH;
- dev_info->reta_size = NFP_NET_CFG_RSS_ITBL_SZ;
- dev_info->hash_key_size = NFP_NET_CFG_RSS_KEY_SZ;
+ dev_info->flow_type_rss_offloads = ETH_RSS_IPV4 |
+ ETH_RSS_NONFRAG_IPV4_TCP |
+ ETH_RSS_NONFRAG_IPV4_UDP |
+ ETH_RSS_IPV6 |
+ ETH_RSS_NONFRAG_IPV6_TCP |
+ ETH_RSS_NONFRAG_IPV6_UDP;
+
+ dev_info->reta_size = NFP_NET_CFG_RSS_ITBL_SZ;
+ dev_info->hash_key_size = NFP_NET_CFG_RSS_KEY_SZ;
+ }
dev_info->speed_capa = ETH_LINK_SPEED_1G | ETH_LINK_SPEED_10G |
ETH_LINK_SPEED_25G | ETH_LINK_SPEED_40G |
ETH_LINK_SPEED_50G | ETH_LINK_SPEED_100G;
+
+ return 0;
}
static const uint32_t *
PMD_DRV_LOG(INFO, " Port %d: Link Down",
dev->data->port_id);
- PMD_DRV_LOG(INFO, "PCI Address: %04d:%02d:%02d:%d",
- pci_dev->addr.domain, pci_dev->addr.bus,
- pci_dev->addr.devid, pci_dev->addr.function);
+ PMD_DRV_LOG(INFO, "PCI Address: " PCI_PRI_FMT,
+ pci_dev->addr.domain, pci_dev->addr.bus,
+ pci_dev->addr.devid, pci_dev->addr.function);
}
/* Interrupt configuration and handling */
if (hw->ctrl & NFP_NET_CFG_CTRL_MSIXAUTO) {
/* If MSI-X auto-masking is used, clear the entry */
rte_wmb();
- rte_intr_enable(&pci_dev->intr_handle);
+ rte_intr_ack(&pci_dev->intr_handle);
} else {
/* Make sure all updates are written before un-masking */
rte_wmb();
struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
nfp_net_link_update(dev, 0);
- _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
+ rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
nfp_net_dev_link_status_print(dev);
hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
/* check that mtu is within the allowed range */
- if ((mtu < ETHER_MIN_MTU) || ((uint32_t)mtu > hw->max_mtu))
+ if (mtu < RTE_ETHER_MIN_MTU || (uint32_t)mtu > hw->max_mtu)
return -EINVAL;
/* mtu setting is forbidden if port is started */
}
/* switch to jumbo mode if needed */
- if ((uint32_t)mtu > ETHER_MAX_LEN)
- dev->data->dev_conf.rxmode.jumbo_frame = 1;
+ if ((uint32_t)mtu > RTE_ETHER_MTU)
+ dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
else
- dev->data->dev_conf.rxmode.jumbo_frame = 0;
+ dev->data->dev_conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
/* update max frame size */
dev->data->dev_conf.rxmode.max_rx_pkt_len = (uint32_t)mtu;
const struct rte_memzone *tz;
struct nfp_net_rxq *rxq;
struct nfp_net_hw *hw;
+ uint32_t rx_desc_sz;
hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
PMD_INIT_FUNC_TRACE();
/* Validating number of descriptors */
- if (((nb_desc * sizeof(struct nfp_net_rx_desc)) % 128) != 0 ||
- (nb_desc > NFP_NET_MAX_RX_DESC) ||
- (nb_desc < NFP_NET_MIN_RX_DESC)) {
+ rx_desc_sz = nb_desc * sizeof(struct nfp_net_rx_desc);
+ if (rx_desc_sz % NFP_ALIGN_RING_DESC != 0 ||
+ nb_desc > NFP_NET_MAX_RX_DESC ||
+ nb_desc < NFP_NET_MIN_RX_DESC) {
PMD_DRV_LOG(ERR, "Wrong nb_desc value");
return -EINVAL;
}
if (rxq == NULL)
return -ENOMEM;
- /* Hw queues mapping based on firmware confifguration */
+ /* Hw queues mapping based on firmware configuration */
rxq->qidx = queue_idx;
rxq->fl_qcidx = queue_idx * hw->stride_rx;
rxq->rx_qcidx = rxq->fl_qcidx + (hw->stride_rx - 1);
socket_id);
if (tz == NULL) {
- PMD_DRV_LOG(ERR, "Error allocatig rx dma");
+ PMD_DRV_LOG(ERR, "Error allocating rx dma");
nfp_net_rx_queue_release(rxq);
return -ENOMEM;
}
struct nfp_net_txq *txq;
uint16_t tx_free_thresh;
struct nfp_net_hw *hw;
+ uint32_t tx_desc_sz;
hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
PMD_INIT_FUNC_TRACE();
/* Validating number of descriptors */
- if (((nb_desc * sizeof(struct nfp_net_tx_desc)) % 128) != 0 ||
- (nb_desc > NFP_NET_MAX_TX_DESC) ||
- (nb_desc < NFP_NET_MIN_TX_DESC)) {
+ tx_desc_sz = nb_desc * sizeof(struct nfp_net_tx_desc);
+ if (tx_desc_sz % NFP_ALIGN_RING_DESC != 0 ||
+ nb_desc > NFP_NET_MAX_TX_DESC ||
+ nb_desc < NFP_NET_MIN_TX_DESC) {
PMD_DRV_LOG(ERR, "Wrong nb_desc value");
return -EINVAL;
}
return;
/* If IPv4 and IP checksum error, fail */
- if ((rxd->rxd.flags & PCIE_DESC_RX_IP4_CSUM) &&
- !(rxd->rxd.flags & PCIE_DESC_RX_IP4_CSUM_OK))
+ if (unlikely((rxd->rxd.flags & PCIE_DESC_RX_IP4_CSUM) &&
+ !(rxd->rxd.flags & PCIE_DESC_RX_IP4_CSUM_OK)))
mb->ol_flags |= PKT_RX_IP_CKSUM_BAD;
+ else
+ mb->ol_flags |= PKT_RX_IP_CKSUM_GOOD;
/* If neither UDP nor TCP return */
if (!(rxd->rxd.flags & PCIE_DESC_RX_TCP_CSUM) &&
!(rxd->rxd.flags & PCIE_DESC_RX_UDP_CSUM))
return;
- if ((rxd->rxd.flags & PCIE_DESC_RX_TCP_CSUM) &&
- !(rxd->rxd.flags & PCIE_DESC_RX_TCP_CSUM_OK))
- mb->ol_flags |= PKT_RX_L4_CKSUM_BAD;
-
- if ((rxd->rxd.flags & PCIE_DESC_RX_UDP_CSUM) &&
- !(rxd->rxd.flags & PCIE_DESC_RX_UDP_CSUM_OK))
+ if (likely(rxd->rxd.flags & PCIE_DESC_RX_L4_CSUM_OK))
+ mb->ol_flags |= PKT_RX_L4_CKSUM_GOOD;
+ else
mb->ol_flags |= PKT_RX_L4_CKSUM_BAD;
}
case NFP_NET_RSS_IPV6_EX:
mbuf->packet_type |= RTE_PTYPE_INNER_L3_IPV6_EXT;
break;
+ case NFP_NET_RSS_IPV4_TCP:
+ mbuf->packet_type |= RTE_PTYPE_INNER_L3_IPV6_EXT;
+ break;
+ case NFP_NET_RSS_IPV6_TCP:
+ mbuf->packet_type |= RTE_PTYPE_INNER_L3_IPV6_EXT;
+ break;
+ case NFP_NET_RSS_IPV4_UDP:
+ mbuf->packet_type |= RTE_PTYPE_INNER_L3_IPV6_EXT;
+ break;
+ case NFP_NET_RSS_IPV6_UDP:
+ mbuf->packet_type |= RTE_PTYPE_INNER_L3_IPV6_EXT;
+ break;
default:
mbuf->packet_type |= RTE_PTYPE_INNER_L4_MASK;
}
/*
* RX path design:
*
- * There are some decissions to take:
+ * There are some decisions to take:
* 1) How to check DD RX descriptors bit
* 2) How and when to allocate new mbufs
*
rte_rmb();
/*
- * We got a packet. Let's alloc a new mbuff for refilling the
+ * We got a packet. Let's alloc a new mbuf for refilling the
* free descriptor ring as soon as possible
*/
new_mb = rte_pktmbuf_alloc(rxq->mem_pool);
nb_hold++;
/*
- * Grab the mbuff and refill the descriptor with the
- * previously allocated mbuff
+ * Grab the mbuf and refill the descriptor with the
+ * previously allocated mbuf
*/
mb = rxb->mbuf;
rxb->mbuf = new_mb;
return -EINVAL;
}
- /* Filling the received mbuff with packet info */
+ /* Filling the received mbuf with packet info */
if (hw->rx_offset)
mb->data_off = RTE_PKTMBUF_HEADROOM + hw->rx_offset;
else
mb->ol_flags |= PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED;
}
- /* Adding the mbuff to the mbuff array passed by the app */
+ /* Adding the mbuf to the mbuf array passed by the app */
rx_pkts[avail++] = mb;
/* Now resetting and updating the descriptor */
hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
new_ctrl = 0;
- if ((mask & ETH_VLAN_FILTER_OFFLOAD) ||
- (mask & ETH_VLAN_EXTEND_OFFLOAD))
- PMD_DRV_LOG(INFO, "No support for ETH_VLAN_FILTER_OFFLOAD or"
- " ETH_VLAN_EXTEND_OFFLOAD");
-
/* Enable vlan strip if it is not configured yet */
if ((mask & ETH_VLAN_STRIP_OFFLOAD) &&
!(hw->ctrl & NFP_NET_CFG_CTRL_RXVLAN))
for (j = 0; j < 4; j++) {
if (!(mask & (0x1 << j)))
continue;
- reta_conf->reta[shift + j] =
+ reta_conf[idx].reta[shift + j] =
(uint8_t)((reta >> (8 * j)) & 0xF);
}
}
rss_hf = rss_conf->rss_hf;
if (rss_hf & ETH_RSS_IPV4)
- cfg_rss_ctrl |= NFP_NET_CFG_RSS_IPV4 |
- NFP_NET_CFG_RSS_IPV4_TCP |
- NFP_NET_CFG_RSS_IPV4_UDP;
+ cfg_rss_ctrl |= NFP_NET_CFG_RSS_IPV4;
+
+ if (rss_hf & ETH_RSS_NONFRAG_IPV4_TCP)
+ cfg_rss_ctrl |= NFP_NET_CFG_RSS_IPV4_TCP;
+
+ if (rss_hf & ETH_RSS_NONFRAG_IPV4_UDP)
+ cfg_rss_ctrl |= NFP_NET_CFG_RSS_IPV4_UDP;
if (rss_hf & ETH_RSS_IPV6)
- cfg_rss_ctrl |= NFP_NET_CFG_RSS_IPV6 |
- NFP_NET_CFG_RSS_IPV6_TCP |
- NFP_NET_CFG_RSS_IPV6_UDP;
+ cfg_rss_ctrl |= NFP_NET_CFG_RSS_IPV6;
+
+ if (rss_hf & ETH_RSS_NONFRAG_IPV6_TCP)
+ cfg_rss_ctrl |= NFP_NET_CFG_RSS_IPV6_TCP;
+
+ if (rss_hf & ETH_RSS_NONFRAG_IPV6_UDP)
+ cfg_rss_ctrl |= NFP_NET_CFG_RSS_IPV6_UDP;
cfg_rss_ctrl |= NFP_NET_CFG_RSS_MASK;
cfg_rss_ctrl |= NFP_NET_CFG_RSS_TOEPLITZ;
if (cfg_rss_ctrl & NFP_NET_CFG_RSS_IPV6)
rss_hf |= ETH_RSS_NONFRAG_IPV4_UDP | ETH_RSS_NONFRAG_IPV6_UDP;
+ /* Propagate current RSS hash functions to caller */
+ rss_conf->rss_hf = rss_hf;
+
/* Reading the key size */
rss_conf->rss_key_len = nn_cfg_readl(hw, NFP_NET_CFG_RSS_KEY_SZ);
.dev_configure = nfp_net_configure,
.dev_start = nfp_net_start,
.dev_stop = nfp_net_stop,
+ .dev_set_link_up = nfp_net_set_link_up,
+ .dev_set_link_down = nfp_net_set_link_down,
.dev_close = nfp_net_close,
.promiscuous_enable = nfp_net_promisc_enable,
.promiscuous_disable = nfp_net_promisc_disable,
.rss_hash_conf_get = nfp_net_rss_hash_conf_get,
.rx_queue_setup = nfp_net_rx_queue_setup,
.rx_queue_release = nfp_net_rx_queue_release,
- .rx_queue_count = nfp_net_rx_queue_count,
.tx_queue_setup = nfp_net_tx_queue_setup,
.tx_queue_release = nfp_net_tx_queue_release,
.rx_queue_intr_enable = nfp_rx_queue_intr_enable,
.rx_queue_intr_disable = nfp_rx_queue_intr_disable,
};
-/*
- * All eth_dev created got its private data, but before nfp_net_init, that
- * private data is referencing private data for all the PF ports. This is due
- * to how the vNIC bars are mapped based on first port, so all ports need info
- * about port 0 private data. Inside nfp_net_init the private data pointer is
- * changed to the right address for each port once the bars have been mapped.
- *
- * This functions helps to find out which port and therefore which offset
- * inside the private data array to use.
- */
-static int
-get_pf_port_number(char *name)
-{
- char *pf_str = name;
- int size = 0;
-
- while ((*pf_str != '_') && (*pf_str != '\0') && (size++ < 30))
- pf_str++;
-
- if (size == 30)
- /*
- * This should not happen at all and it would mean major
- * implementation fault.
- */
- rte_panic("nfp_net: problem with pf device name\n");
-
- /* Expecting _portX with X within [0,7] */
- pf_str += 5;
-
- return (int)strtol(pf_str, NULL, 10);
-}
static int
nfp_net_init(struct rte_eth_dev *eth_dev)
{
struct rte_pci_device *pci_dev;
- struct nfp_net_hw *hw, *hwport0;
+ struct nfp_pf_dev *pf_dev;
+ struct nfp_net_hw *hw;
uint64_t tx_bar_off = 0, rx_bar_off = 0;
uint32_t start_q;
pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
+ /* Use backpointer here to the PF of this eth_dev */
+ pf_dev = NFP_NET_DEV_PRIVATE_TO_PF(eth_dev->data->dev_private);
+
+ /* NFP can not handle DMA addresses requiring more than 40 bits */
+ if (rte_mem_check_dma_mask(40)) {
+ RTE_LOG(ERR, PMD, "device %s can not be used:",
+ pci_dev->device.name);
+ RTE_LOG(ERR, PMD, "\trestricted dma mask to 40 bits!\n");
+ return -ENODEV;
+ };
+
if ((pci_dev->id.device_id == PCI_DEVICE_ID_NFP4000_PF_NIC) ||
(pci_dev->id.device_id == PCI_DEVICE_ID_NFP6000_PF_NIC)) {
- port = get_pf_port_number(eth_dev->data->name);
+ port = ((struct nfp_net_hw *)eth_dev->data->dev_private)->idx;
if (port < 0 || port > 7) {
PMD_DRV_LOG(ERR, "Port value is wrong");
return -ENODEV;
}
- PMD_INIT_LOG(DEBUG, "Working with PF port value %d", port);
+ /* Use PF array of physical ports to get pointer to
+ * this specific port
+ */
+ hw = pf_dev->ports[port];
- /* This points to port 0 private data */
- hwport0 = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
+ PMD_INIT_LOG(DEBUG, "Working with physical port number: %d, "
+ "NFP internal port number: %d",
+ port, hw->nfp_idx);
- /* This points to the specific port private data */
- hw = &hwport0[port];
} else {
hw = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
- hwport0 = 0;
}
eth_dev->dev_ops = &nfp_net_eth_dev_ops;
+ eth_dev->rx_queue_count = nfp_net_rx_queue_count;
eth_dev->rx_pkt_burst = &nfp_net_recv_pkts;
eth_dev->tx_pkt_burst = &nfp_net_xmit_pkts;
return -ENODEV;
}
- if (hw->is_pf && port == 0) {
- hw->ctrl_bar = nfp_rtsym_map(hw->sym_tbl, "_pf0_net_bar0",
- hw->total_ports * 32768,
- &hw->ctrl_area);
- if (!hw->ctrl_bar) {
- printf("nfp_rtsym_map fails for _pf0_net_ctrl_bar");
- return -EIO;
+ if (hw->is_phyport) {
+ if (port == 0) {
+ hw->ctrl_bar = pf_dev->ctrl_bar;
+ } else {
+ if (!pf_dev->ctrl_bar)
+ return -ENODEV;
+ /* Use port offset in pf ctrl_bar for this
+ * ports control bar
+ */
+ hw->ctrl_bar = pf_dev->ctrl_bar +
+ (port * NFP_PF_CSR_SLICE_SIZE);
}
-
- PMD_INIT_LOG(DEBUG, "ctrl bar: %p", hw->ctrl_bar);
- }
-
- if (port > 0) {
- if (!hwport0->ctrl_bar)
- return -ENODEV;
-
- /* address based on port0 offset */
- hw->ctrl_bar = hwport0->ctrl_bar +
- (port * NFP_PF_CSR_SLICE_SIZE);
}
PMD_INIT_LOG(DEBUG, "ctrl bar: %p", hw->ctrl_bar);
case PCI_DEVICE_ID_NFP6000_PF_NIC:
case PCI_DEVICE_ID_NFP6000_VF_NIC:
start_q = nn_cfg_readl(hw, NFP_NET_CFG_START_TXQ);
- tx_bar_off = start_q * NFP_QCP_QUEUE_ADDR_SZ;
+ tx_bar_off = (uint64_t)start_q * NFP_QCP_QUEUE_ADDR_SZ;
start_q = nn_cfg_readl(hw, NFP_NET_CFG_START_RXQ);
- rx_bar_off = start_q * NFP_QCP_QUEUE_ADDR_SZ;
+ rx_bar_off = (uint64_t)start_q * NFP_QCP_QUEUE_ADDR_SZ;
break;
default:
PMD_DRV_LOG(ERR, "nfp_net: no device ID matching");
PMD_INIT_LOG(DEBUG, "tx_bar_off: 0x%" PRIx64 "", tx_bar_off);
PMD_INIT_LOG(DEBUG, "rx_bar_off: 0x%" PRIx64 "", rx_bar_off);
- if (hw->is_pf && port == 0) {
- /* configure access to tx/rx vNIC BARs */
- hwport0->hw_queues = nfp_cpp_map_area(hw->cpp, 0, 0,
- NFP_PCIE_QUEUE(0),
- NFP_QCP_QUEUE_AREA_SZ,
- &hw->hwqueues_area);
-
- if (!hwport0->hw_queues) {
- printf("nfp_rtsym_map fails for net.qc");
- err = -EIO;
- goto dev_err_ctrl_map;
- }
-
- PMD_INIT_LOG(DEBUG, "tx/rx bar address: 0x%p",
- hwport0->hw_queues);
- }
-
- if (hw->is_pf) {
- hw->tx_bar = hwport0->hw_queues + tx_bar_off;
- hw->rx_bar = hwport0->hw_queues + rx_bar_off;
+ if (hw->is_phyport) {
+ hw->tx_bar = pf_dev->hw_queues + tx_bar_off;
+ hw->rx_bar = pf_dev->hw_queues + rx_bar_off;
eth_dev->data->dev_private = hw;
} else {
hw->tx_bar = (uint8_t *)pci_dev->mem_resource[2].addr +
hw->ver = nn_cfg_readl(hw, NFP_NET_CFG_VERSION);
hw->cap = nn_cfg_readl(hw, NFP_NET_CFG_CAP);
hw->max_mtu = nn_cfg_readl(hw, NFP_NET_CFG_MAX_MTU);
- hw->mtu = ETHER_MTU;
+ hw->mtu = RTE_ETHER_MTU;
/* VLAN insertion is incompatible with LSOv2 */
if (hw->cap & NFP_NET_CFG_CTRL_LSO2)
rte_spinlock_init(&hw->reconfig_lock);
/* Allocating memory for mac addr */
- eth_dev->data->mac_addrs = rte_zmalloc("mac_addr", ETHER_ADDR_LEN, 0);
+ eth_dev->data->mac_addrs = rte_zmalloc("mac_addr",
+ RTE_ETHER_ADDR_LEN, 0);
if (eth_dev->data->mac_addrs == NULL) {
PMD_INIT_LOG(ERR, "Failed to space for MAC address");
err = -ENOMEM;
goto dev_err_queues_map;
}
- if (hw->is_pf) {
- nfp_net_pf_read_mac(hwport0, port);
+ if (hw->is_phyport) {
+ nfp_net_pf_read_mac(pf_dev, port);
nfp_net_write_mac(hw, (uint8_t *)&hw->mac_addr);
} else {
nfp_net_vf_read_mac(hw);
}
- if (!is_valid_assigned_ether_addr((struct ether_addr *)&hw->mac_addr)) {
+ if (!rte_is_valid_assigned_ether_addr(
+ (struct rte_ether_addr *)&hw->mac_addr)) {
PMD_INIT_LOG(INFO, "Using random mac address for port %d",
port);
/* Using random mac addresses for VFs */
- eth_random_addr(&hw->mac_addr[0]);
+ rte_eth_random_addr(&hw->mac_addr[0]);
nfp_net_write_mac(hw, (uint8_t *)&hw->mac_addr);
}
/* Copying mac address to DPDK eth_dev struct */
- ether_addr_copy((struct ether_addr *)hw->mac_addr,
+ rte_ether_addr_copy((struct rte_ether_addr *)hw->mac_addr,
ð_dev->data->mac_addrs[0]);
+ if (!(hw->cap & NFP_NET_CFG_CTRL_LIVE_ADDR))
+ eth_dev->data->dev_flags |= RTE_ETH_DEV_NOLIVE_MAC_ADDR;
+
+ eth_dev->data->dev_flags |= RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
+
PMD_INIT_LOG(INFO, "port %d VendorID=0x%x DeviceID=0x%x "
"mac=%02x:%02x:%02x:%02x:%02x:%02x",
eth_dev->data->port_id, pci_dev->id.vendor_id,
hw->mac_addr[0], hw->mac_addr[1], hw->mac_addr[2],
hw->mac_addr[3], hw->mac_addr[4], hw->mac_addr[5]);
- /* Registering LSC interrupt handler */
- rte_intr_callback_register(&pci_dev->intr_handle,
- nfp_net_dev_interrupt_handler,
- (void *)eth_dev);
-
- /* Telling the firmware about the LSC interrupt entry */
- nn_cfg_writeb(hw, NFP_NET_CFG_LSC, NFP_NET_IRQ_LSC_IDX);
-
- /* Recording current stats counters values */
- nfp_net_stats_reset(eth_dev);
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ /* Registering LSC interrupt handler */
+ rte_intr_callback_register(&pci_dev->intr_handle,
+ nfp_net_dev_interrupt_handler,
+ (void *)eth_dev);
+ /* Telling the firmware about the LSC interrupt entry */
+ nn_cfg_writeb(hw, NFP_NET_CFG_LSC, NFP_NET_IRQ_LSC_IDX);
+ /* Recording current stats counters values */
+ nfp_net_stats_reset(eth_dev);
+ }
return 0;
return err;
}
+#define NFP_CPP_MEMIO_BOUNDARY (1 << 20)
+
+/*
+ * Serving a write request to NFP from host programs. The request
+ * sends the write size and the CPP target. The bridge makes use
+ * of CPP interface handler configured by the PMD setup.
+ */
static int
-nfp_pf_create_dev(struct rte_pci_device *dev, int port, int ports,
- struct nfp_cpp *cpp, struct nfp_hwinfo *hwinfo,
- int phys_port, struct nfp_rtsym_table *sym_tbl, void **priv)
+nfp_cpp_bridge_serve_write(int sockfd, struct nfp_cpp *cpp)
{
- struct rte_eth_dev *eth_dev;
- struct nfp_net_hw *hw;
- char *port_name;
- int ret;
+ struct nfp_cpp_area *area;
+ off_t offset, nfp_offset;
+ uint32_t cpp_id, pos, len;
+ uint32_t tmpbuf[16];
+ size_t count, curlen, totlen = 0;
+ int err = 0;
- port_name = rte_zmalloc("nfp_pf_port_name", 100, 0);
- if (!port_name)
- return -ENOMEM;
+ PMD_CPP_LOG(DEBUG, "%s: offset size %zu, count_size: %zu\n", __func__,
+ sizeof(off_t), sizeof(size_t));
- if (ports > 1)
- sprintf(port_name, "%s_port%d", dev->device.name, port);
- else
- sprintf(port_name, "%s", dev->device.name);
+ /* Reading the count param */
+ err = recv(sockfd, &count, sizeof(off_t), 0);
+ if (err != sizeof(off_t))
+ return -EINVAL;
- eth_dev = rte_eth_dev_allocate(port_name);
- if (!eth_dev)
- return -ENOMEM;
+ curlen = count;
- if (port == 0) {
- *priv = rte_zmalloc(port_name,
- sizeof(struct nfp_net_adapter) * ports,
- RTE_CACHE_LINE_SIZE);
- if (!*priv) {
- rte_eth_dev_release_port(eth_dev);
- return -ENOMEM;
+ /* Reading the offset param */
+ err = recv(sockfd, &offset, sizeof(off_t), 0);
+ if (err != sizeof(off_t))
+ return -EINVAL;
+
+ /* Obtain target's CPP ID and offset in target */
+ cpp_id = (offset >> 40) << 8;
+ nfp_offset = offset & ((1ull << 40) - 1);
+
+ PMD_CPP_LOG(DEBUG, "%s: count %zu and offset %jd\n", __func__, count,
+ offset);
+ PMD_CPP_LOG(DEBUG, "%s: cpp_id %08x and nfp_offset %jd\n", __func__,
+ cpp_id, nfp_offset);
+
+ /* Adjust length if not aligned */
+ if (((nfp_offset + (off_t)count - 1) & ~(NFP_CPP_MEMIO_BOUNDARY - 1)) !=
+ (nfp_offset & ~(NFP_CPP_MEMIO_BOUNDARY - 1))) {
+ curlen = NFP_CPP_MEMIO_BOUNDARY -
+ (nfp_offset & (NFP_CPP_MEMIO_BOUNDARY - 1));
+ }
+
+ while (count > 0) {
+ /* configure a CPP PCIe2CPP BAR for mapping the CPP target */
+ area = nfp_cpp_area_alloc_with_name(cpp, cpp_id, "nfp.cdev",
+ nfp_offset, curlen);
+ if (!area) {
+ RTE_LOG(ERR, PMD, "%s: area alloc fail\n", __func__);
+ return -EIO;
+ }
+
+ /* mapping the target */
+ err = nfp_cpp_area_acquire(area);
+ if (err < 0) {
+ RTE_LOG(ERR, PMD, "area acquire failed\n");
+ nfp_cpp_area_free(area);
+ return -EIO;
+ }
+
+ for (pos = 0; pos < curlen; pos += len) {
+ len = curlen - pos;
+ if (len > sizeof(tmpbuf))
+ len = sizeof(tmpbuf);
+
+ PMD_CPP_LOG(DEBUG, "%s: Receive %u of %zu\n", __func__,
+ len, count);
+ err = recv(sockfd, tmpbuf, len, MSG_WAITALL);
+ if (err != (int)len) {
+ RTE_LOG(ERR, PMD,
+ "%s: error when receiving, %d of %zu\n",
+ __func__, err, count);
+ nfp_cpp_area_release(area);
+ nfp_cpp_area_free(area);
+ return -EIO;
+ }
+ err = nfp_cpp_area_write(area, pos, tmpbuf, len);
+ if (err < 0) {
+ RTE_LOG(ERR, PMD, "nfp_cpp_area_write error\n");
+ nfp_cpp_area_release(area);
+ nfp_cpp_area_free(area);
+ return -EIO;
+ }
}
+
+ nfp_offset += pos;
+ totlen += pos;
+ nfp_cpp_area_release(area);
+ nfp_cpp_area_free(area);
+
+ count -= pos;
+ curlen = (count > NFP_CPP_MEMIO_BOUNDARY) ?
+ NFP_CPP_MEMIO_BOUNDARY : count;
}
- eth_dev->data->dev_private = *priv;
+ return 0;
+}
- /*
- * dev_private pointing to port0 dev_private because we need
- * to configure vNIC bars based on port0 at nfp_net_init.
- * Then dev_private is adjusted per port.
- */
- hw = (struct nfp_net_hw *)(eth_dev->data->dev_private) + port;
- hw->cpp = cpp;
- hw->hwinfo = hwinfo;
- hw->sym_tbl = sym_tbl;
- hw->pf_port_idx = phys_port;
- hw->is_pf = 1;
- if (ports > 1)
- hw->pf_multiport_enabled = 1;
+/*
+ * Serving a read request to NFP from host programs. The request
+ * sends the read size and the CPP target. The bridge makes use
+ * of CPP interface handler configured by the PMD setup. The read
+ * data is sent to the requester using the same socket.
+ */
+static int
+nfp_cpp_bridge_serve_read(int sockfd, struct nfp_cpp *cpp)
+{
+ struct nfp_cpp_area *area;
+ off_t offset, nfp_offset;
+ uint32_t cpp_id, pos, len;
+ uint32_t tmpbuf[16];
+ size_t count, curlen, totlen = 0;
+ int err = 0;
- hw->total_ports = ports;
+ PMD_CPP_LOG(DEBUG, "%s: offset size %zu, count_size: %zu\n", __func__,
+ sizeof(off_t), sizeof(size_t));
- eth_dev->device = &dev->device;
- rte_eth_copy_pci_info(eth_dev, dev);
+ /* Reading the count param */
+ err = recv(sockfd, &count, sizeof(off_t), 0);
+ if (err != sizeof(off_t))
+ return -EINVAL;
- ret = nfp_net_init(eth_dev);
+ curlen = count;
- if (ret)
- rte_eth_dev_release_port(eth_dev);
- else
- rte_eth_dev_probing_finish(eth_dev);
+ /* Reading the offset param */
+ err = recv(sockfd, &offset, sizeof(off_t), 0);
+ if (err != sizeof(off_t))
+ return -EINVAL;
- rte_free(port_name);
+ /* Obtain target's CPP ID and offset in target */
+ cpp_id = (offset >> 40) << 8;
+ nfp_offset = offset & ((1ull << 40) - 1);
- return ret;
+ PMD_CPP_LOG(DEBUG, "%s: count %zu and offset %jd\n", __func__, count,
+ offset);
+ PMD_CPP_LOG(DEBUG, "%s: cpp_id %08x and nfp_offset %jd\n", __func__,
+ cpp_id, nfp_offset);
+
+ /* Adjust length if not aligned */
+ if (((nfp_offset + (off_t)count - 1) & ~(NFP_CPP_MEMIO_BOUNDARY - 1)) !=
+ (nfp_offset & ~(NFP_CPP_MEMIO_BOUNDARY - 1))) {
+ curlen = NFP_CPP_MEMIO_BOUNDARY -
+ (nfp_offset & (NFP_CPP_MEMIO_BOUNDARY - 1));
+ }
+
+ while (count > 0) {
+ area = nfp_cpp_area_alloc_with_name(cpp, cpp_id, "nfp.cdev",
+ nfp_offset, curlen);
+ if (!area) {
+ RTE_LOG(ERR, PMD, "%s: area alloc failed\n", __func__);
+ return -EIO;
+ }
+
+ err = nfp_cpp_area_acquire(area);
+ if (err < 0) {
+ RTE_LOG(ERR, PMD, "area acquire failed\n");
+ nfp_cpp_area_free(area);
+ return -EIO;
+ }
+
+ for (pos = 0; pos < curlen; pos += len) {
+ len = curlen - pos;
+ if (len > sizeof(tmpbuf))
+ len = sizeof(tmpbuf);
+
+ err = nfp_cpp_area_read(area, pos, tmpbuf, len);
+ if (err < 0) {
+ RTE_LOG(ERR, PMD, "nfp_cpp_area_read error\n");
+ nfp_cpp_area_release(area);
+ nfp_cpp_area_free(area);
+ return -EIO;
+ }
+ PMD_CPP_LOG(DEBUG, "%s: sending %u of %zu\n", __func__,
+ len, count);
+
+ err = send(sockfd, tmpbuf, len, 0);
+ if (err != (int)len) {
+ RTE_LOG(ERR, PMD,
+ "%s: error when sending: %d of %zu\n",
+ __func__, err, count);
+ nfp_cpp_area_release(area);
+ nfp_cpp_area_free(area);
+ return -EIO;
+ }
+ }
+
+ nfp_offset += pos;
+ totlen += pos;
+ nfp_cpp_area_release(area);
+ nfp_cpp_area_free(area);
+
+ count -= pos;
+ curlen = (count > NFP_CPP_MEMIO_BOUNDARY) ?
+ NFP_CPP_MEMIO_BOUNDARY : count;
+ }
+ return 0;
+}
+
+#define NFP_IOCTL 'n'
+#define NFP_IOCTL_CPP_IDENTIFICATION _IOW(NFP_IOCTL, 0x8f, uint32_t)
+/*
+ * Serving a ioctl command from host NFP tools. This usually goes to
+ * a kernel driver char driver but it is not available when the PF is
+ * bound to the PMD. Currently just one ioctl command is served and it
+ * does not require any CPP access at all.
+ */
+static int
+nfp_cpp_bridge_serve_ioctl(int sockfd, struct nfp_cpp *cpp)
+{
+ uint32_t cmd, ident_size, tmp;
+ int err;
+
+ /* Reading now the IOCTL command */
+ err = recv(sockfd, &cmd, 4, 0);
+ if (err != 4) {
+ RTE_LOG(ERR, PMD, "%s: read error from socket\n", __func__);
+ return -EIO;
+ }
+
+ /* Only supporting NFP_IOCTL_CPP_IDENTIFICATION */
+ if (cmd != NFP_IOCTL_CPP_IDENTIFICATION) {
+ RTE_LOG(ERR, PMD, "%s: unknown cmd %d\n", __func__, cmd);
+ return -EINVAL;
+ }
+
+ err = recv(sockfd, &ident_size, 4, 0);
+ if (err != 4) {
+ RTE_LOG(ERR, PMD, "%s: read error from socket\n", __func__);
+ return -EIO;
+ }
+
+ tmp = nfp_cpp_model(cpp);
+
+ PMD_CPP_LOG(DEBUG, "%s: sending NFP model %08x\n", __func__, tmp);
+
+ err = send(sockfd, &tmp, 4, 0);
+ if (err != 4) {
+ RTE_LOG(ERR, PMD, "%s: error writing to socket\n", __func__);
+ return -EIO;
+ }
+
+ tmp = cpp->interface;
+
+ PMD_CPP_LOG(DEBUG, "%s: sending NFP interface %08x\n", __func__, tmp);
+
+ err = send(sockfd, &tmp, 4, 0);
+ if (err != 4) {
+ RTE_LOG(ERR, PMD, "%s: error writing to socket\n", __func__);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+#define NFP_BRIDGE_OP_READ 20
+#define NFP_BRIDGE_OP_WRITE 30
+#define NFP_BRIDGE_OP_IOCTL 40
+
+/*
+ * This is the code to be executed by a service core. The CPP bridge interface
+ * is based on a unix socket and requests usually received by a kernel char
+ * driver, read, write and ioctl, are handled by the CPP bridge. NFP host tools
+ * can be executed with a wrapper library and LD_LIBRARY being completely
+ * unaware of the CPP bridge performing the NFP kernel char driver for CPP
+ * accesses.
+ */
+static int32_t
+nfp_cpp_bridge_service_func(void *args)
+{
+ struct sockaddr address;
+ struct nfp_cpp *cpp = args;
+ int sockfd, datafd, op, ret;
+
+ unlink("/tmp/nfp_cpp");
+ sockfd = socket(AF_UNIX, SOCK_STREAM, 0);
+ if (sockfd < 0) {
+ RTE_LOG(ERR, PMD, "%s: socket creation error. Service failed\n",
+ __func__);
+ return -EIO;
+ }
+
+ memset(&address, 0, sizeof(struct sockaddr));
+
+ address.sa_family = AF_UNIX;
+ strcpy(address.sa_data, "/tmp/nfp_cpp");
+
+ ret = bind(sockfd, (const struct sockaddr *)&address,
+ sizeof(struct sockaddr));
+ if (ret < 0) {
+ RTE_LOG(ERR, PMD, "%s: bind error (%d). Service failed\n",
+ __func__, errno);
+ close(sockfd);
+ return ret;
+ }
+
+ ret = listen(sockfd, 20);
+ if (ret < 0) {
+ RTE_LOG(ERR, PMD, "%s: listen error(%d). Service failed\n",
+ __func__, errno);
+ close(sockfd);
+ return ret;
+ }
+
+ for (;;) {
+ datafd = accept(sockfd, NULL, NULL);
+ if (datafd < 0) {
+ RTE_LOG(ERR, PMD, "%s: accept call error (%d)\n",
+ __func__, errno);
+ RTE_LOG(ERR, PMD, "%s: service failed\n", __func__);
+ close(sockfd);
+ return -EIO;
+ }
+
+ while (1) {
+ ret = recv(datafd, &op, 4, 0);
+ if (ret <= 0) {
+ PMD_CPP_LOG(DEBUG, "%s: socket close\n",
+ __func__);
+ break;
+ }
+
+ PMD_CPP_LOG(DEBUG, "%s: getting op %u\n", __func__, op);
+
+ if (op == NFP_BRIDGE_OP_READ)
+ nfp_cpp_bridge_serve_read(datafd, cpp);
+
+ if (op == NFP_BRIDGE_OP_WRITE)
+ nfp_cpp_bridge_serve_write(datafd, cpp);
+
+ if (op == NFP_BRIDGE_OP_IOCTL)
+ nfp_cpp_bridge_serve_ioctl(datafd, cpp);
+
+ if (op == 0)
+ break;
+ }
+ close(datafd);
+ }
+ close(sockfd);
+
+ return 0;
}
#define DEFAULT_FW_PATH "/lib/firmware/netronome"
/* Looking for firmware file in order of priority */
/* First try to find a firmware image specific for this device */
- sprintf(serial, "serial-%02x-%02x-%02x-%02x-%02x-%02x-%02x-%02x",
+ snprintf(serial, sizeof(serial),
+ "serial-%02x-%02x-%02x-%02x-%02x-%02x-%02x-%02x",
cpp->serial[0], cpp->serial[1], cpp->serial[2], cpp->serial[3],
cpp->serial[4], cpp->serial[5], cpp->interface >> 8,
cpp->interface & 0xff);
- sprintf(fw_name, "%s/%s.nffw", DEFAULT_FW_PATH, serial);
+ snprintf(fw_name, sizeof(fw_name), "%s/%s.nffw", DEFAULT_FW_PATH,
+ serial);
PMD_DRV_LOG(DEBUG, "Trying with fw file: %s", fw_name);
fw_f = open(fw_name, O_RDONLY);
- if (fw_f > 0)
+ if (fw_f >= 0)
goto read_fw;
/* Then try the PCI name */
- sprintf(fw_name, "%s/pci-%s.nffw", DEFAULT_FW_PATH, dev->device.name);
+ snprintf(fw_name, sizeof(fw_name), "%s/pci-%s.nffw", DEFAULT_FW_PATH,
+ dev->device.name);
PMD_DRV_LOG(DEBUG, "Trying with fw file: %s", fw_name);
fw_f = open(fw_name, O_RDONLY);
- if (fw_f > 0)
+ if (fw_f >= 0)
goto read_fw;
/* Finally try the card type and media */
- sprintf(fw_name, "%s/%s", DEFAULT_FW_PATH, card);
+ snprintf(fw_name, sizeof(fw_name), "%s/%s", DEFAULT_FW_PATH, card);
PMD_DRV_LOG(DEBUG, "Trying with fw file: %s", fw_name);
fw_f = open(fw_name, O_RDONLY);
if (fw_f < 0) {
PMD_DRV_LOG(INFO, "Port speed: %u", nfp_eth_table->ports[0].speed);
- sprintf(card_desc, "nic_%s_%dx%d.nffw", nfp_fw_model,
- nfp_eth_table->count, nfp_eth_table->ports[0].speed / 1000);
+ snprintf(card_desc, sizeof(card_desc), "nic_%s_%dx%d.nffw",
+ nfp_fw_model, nfp_eth_table->count,
+ nfp_eth_table->ports[0].speed / 1000);
nsp = nfp_nsp_open(cpp);
if (!nsp) {
return err;
}
-static int nfp_pf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
- struct rte_pci_device *dev)
+static int nfp_init_phyports(struct nfp_pf_dev *pf_dev)
+{
+ struct nfp_net_hw *hw;
+ struct rte_eth_dev *eth_dev;
+ struct nfp_eth_table *nfp_eth_table = NULL;
+ int ret = 0;
+ int i;
+
+ nfp_eth_table = nfp_eth_read_ports(pf_dev->cpp);
+ if (!nfp_eth_table) {
+ PMD_INIT_LOG(ERR, "Error reading NFP ethernet table");
+ ret = -EIO;
+ goto error;
+ }
+
+ /* Loop through all physical ports on PF */
+ for (i = 0; i < pf_dev->total_phyports; i++) {
+ const unsigned int numa_node = rte_socket_id();
+ char port_name[RTE_ETH_NAME_MAX_LEN];
+
+ snprintf(port_name, sizeof(port_name), "%s_port%d",
+ pf_dev->pci_dev->device.name, i);
+
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+ eth_dev = rte_eth_dev_attach_secondary(port_name);
+ if (!eth_dev) {
+ RTE_LOG(ERR, EAL,
+ "secondary process attach failed, "
+ "ethdev doesn't exist");
+ ret = -ENODEV;
+ goto error;
+ }
+
+ eth_dev->process_private = pf_dev->cpp;
+ goto nfp_net_init;
+ }
+
+ /* First port has already been initialized */
+ if (i == 0) {
+ eth_dev = pf_dev->eth_dev;
+ goto skip_dev_alloc;
+ }
+
+ /* Allocate a eth_dev for remaining ports */
+ eth_dev = rte_eth_dev_allocate(port_name);
+ if (!eth_dev) {
+ ret = -ENODEV;
+ goto port_cleanup;
+ }
+
+ /* Allocate memory for remaining ports */
+ eth_dev->data->dev_private =
+ rte_zmalloc_socket(port_name, sizeof(struct nfp_net_hw),
+ RTE_CACHE_LINE_SIZE, numa_node);
+ if (!eth_dev->data->dev_private) {
+ ret = -ENOMEM;
+ rte_eth_dev_release_port(eth_dev);
+ goto port_cleanup;
+ }
+
+skip_dev_alloc:
+ hw = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
+
+ /* Add this device to the PF's array of physical ports */
+ pf_dev->ports[i] = hw;
+
+ hw->pf_dev = pf_dev;
+ hw->cpp = pf_dev->cpp;
+ hw->eth_dev = eth_dev;
+ hw->idx = i;
+ hw->nfp_idx = nfp_eth_table->ports[i].index;
+ hw->is_phyport = true;
+
+nfp_net_init:
+ eth_dev->device = &pf_dev->pci_dev->device;
+
+ /* ctrl/tx/rx BAR mappings and remaining init happens in
+ * nfp_net_init
+ */
+ ret = nfp_net_init(eth_dev);
+
+ if (ret) {
+ ret = -ENODEV;
+ goto port_cleanup;
+ }
+
+ rte_eth_dev_probing_finish(eth_dev);
+
+ } /* End loop, all ports on this PF */
+ ret = 0;
+ goto eth_table_cleanup;
+
+port_cleanup:
+ for (i = 0; i < pf_dev->total_phyports; i++) {
+ if (pf_dev->ports[i] && pf_dev->ports[i]->eth_dev) {
+ struct rte_eth_dev *tmp_dev;
+ tmp_dev = pf_dev->ports[i]->eth_dev;
+ rte_eth_dev_release_port(tmp_dev);
+ pf_dev->ports[i] = NULL;
+ }
+ }
+eth_table_cleanup:
+ free(nfp_eth_table);
+error:
+ return ret;
+}
+
+static int nfp_pf_init(struct rte_eth_dev *eth_dev)
{
+ struct rte_pci_device *pci_dev;
+ struct nfp_net_hw *hw = NULL;
+ struct nfp_pf_dev *pf_dev = NULL;
struct nfp_cpp *cpp;
struct nfp_hwinfo *hwinfo;
struct nfp_rtsym_table *sym_tbl;
struct nfp_eth_table *nfp_eth_table = NULL;
+ struct rte_service_spec service;
+ char name[RTE_ETH_NAME_MAX_LEN];
int total_ports;
- void *priv = 0;
int ret = -ENODEV;
int err;
- int i;
- if (!dev)
+ pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
+ hw = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev);
+
+ if (!pci_dev)
return ret;
/*
* interface. Here we avoid this telling to the CPP init code to
* use a lock file if UIO is being used.
*/
- if (dev->kdrv == RTE_KDRV_VFIO)
- cpp = nfp_cpp_from_device_name(dev->device.name, 0);
+ if (pci_dev->kdrv == RTE_PCI_KDRV_VFIO)
+ cpp = nfp_cpp_from_device_name(pci_dev, 0);
else
- cpp = nfp_cpp_from_device_name(dev->device.name, 1);
+ cpp = nfp_cpp_from_device_name(pci_dev, 1);
if (!cpp) {
- PMD_DRV_LOG(ERR, "A CPP handle can not be obtained");
+ PMD_INIT_LOG(ERR, "A CPP handle can not be obtained");
ret = -EIO;
goto error;
}
hwinfo = nfp_hwinfo_read(cpp);
if (!hwinfo) {
- PMD_DRV_LOG(ERR, "Error reading hwinfo table");
- return -EIO;
+ PMD_INIT_LOG(ERR, "Error reading hwinfo table");
+ ret = -EIO;
+ goto error;
}
nfp_eth_table = nfp_eth_read_ports(cpp);
if (!nfp_eth_table) {
- PMD_DRV_LOG(ERR, "Error reading NFP ethernet table");
- return -EIO;
+ PMD_INIT_LOG(ERR, "Error reading NFP ethernet table");
+ ret = -EIO;
+ goto hwinfo_cleanup;
}
- if (nfp_fw_setup(dev, cpp, nfp_eth_table, hwinfo)) {
- PMD_DRV_LOG(INFO, "Error when uploading firmware");
- ret = -EIO;
- goto error;
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ if (nfp_fw_setup(pci_dev, cpp, nfp_eth_table, hwinfo)) {
+ PMD_INIT_LOG(ERR, "Error when uploading firmware");
+ ret = -EIO;
+ goto eth_table_cleanup;
+ }
}
/* Now the symbol table should be there */
sym_tbl = nfp_rtsym_table_read(cpp);
if (!sym_tbl) {
- PMD_DRV_LOG(ERR, "Something is wrong with the firmware"
+ PMD_INIT_LOG(ERR, "Something is wrong with the firmware"
" symbol table");
ret = -EIO;
- goto error;
+ goto eth_table_cleanup;
}
total_ports = nfp_rtsym_read_le(sym_tbl, "nfd_cfg_pf0_num_ports", &err);
if (total_ports != (int)nfp_eth_table->count) {
PMD_DRV_LOG(ERR, "Inconsistent number of ports");
ret = -EIO;
- goto error;
+ goto sym_tbl_cleanup;
}
- PMD_INIT_LOG(INFO, "Total pf ports: %d", total_ports);
+
+ PMD_INIT_LOG(INFO, "Total physical ports: %d", total_ports);
if (total_ports <= 0 || total_ports > 8) {
- PMD_DRV_LOG(ERR, "nfd_cfg_pf0_num_ports symbol with wrong value");
+ PMD_INIT_LOG(ERR, "nfd_cfg_pf0_num_ports symbol with wrong value");
ret = -ENODEV;
- goto error;
+ goto sym_tbl_cleanup;
+ }
+ /* Allocate memory for the PF "device" */
+ snprintf(name, sizeof(name), "nfp_pf%d", eth_dev->data->port_id);
+ pf_dev = rte_zmalloc(name, sizeof(*pf_dev), 0);
+ if (!pf_dev) {
+ ret = -ENOMEM;
+ goto sym_tbl_cleanup;
}
- for (i = 0; i < total_ports; i++) {
- ret = nfp_pf_create_dev(dev, i, total_ports, cpp, hwinfo,
- nfp_eth_table->ports[i].index,
- sym_tbl, &priv);
- if (ret)
- break;
+ /* Populate the newly created PF device */
+ pf_dev->cpp = cpp;
+ pf_dev->hwinfo = hwinfo;
+ pf_dev->sym_tbl = sym_tbl;
+ pf_dev->total_phyports = total_ports;
+
+ if (total_ports > 1)
+ pf_dev->multiport = true;
+
+ pf_dev->pci_dev = pci_dev;
+
+ /* The first eth_dev is part of the PF struct */
+ pf_dev->eth_dev = eth_dev;
+
+ /* Map the symbol table */
+ pf_dev->ctrl_bar = nfp_rtsym_map(pf_dev->sym_tbl, "_pf0_net_bar0",
+ pf_dev->total_phyports * 32768,
+ &pf_dev->ctrl_area);
+ if (!pf_dev->ctrl_bar) {
+ PMD_INIT_LOG(ERR, "nfp_rtsym_map fails for _pf0_net_ctrl_bar");
+ ret = -EIO;
+ goto pf_cleanup;
}
-error:
+ PMD_INIT_LOG(DEBUG, "ctrl bar: %p", pf_dev->ctrl_bar);
+
+ /* configure access to tx/rx vNIC BARs */
+ pf_dev->hw_queues = nfp_cpp_map_area(pf_dev->cpp, 0, 0,
+ NFP_PCIE_QUEUE(0),
+ NFP_QCP_QUEUE_AREA_SZ,
+ &pf_dev->hwqueues_area);
+ if (!pf_dev->hw_queues) {
+ PMD_INIT_LOG(ERR, "nfp_rtsym_map fails for net.qc");
+ ret = -EIO;
+ goto ctrl_area_cleanup;
+ }
+
+ PMD_INIT_LOG(DEBUG, "tx/rx bar address: 0x%p", pf_dev->hw_queues);
+
+ /* Initialize and prep physical ports now
+ * This will loop through all physical ports
+ */
+ ret = nfp_init_phyports(pf_dev);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Could not create physical ports");
+ goto hwqueues_cleanup;
+ }
+
+ /*
+ * The rte_service needs to be created just once per PMD.
+ * And the cpp handler needs to be linked to the service.
+ * Secondary processes will be used for debugging DPDK apps
+ * when requiring to use the CPP interface for accessing NFP
+ * components. And the cpp handler for secondary processes is
+ * available at this point.
+ */
+ memset(&service, 0, sizeof(struct rte_service_spec));
+ snprintf(service.name, sizeof(service.name), "nfp_cpp_service");
+ service.callback = nfp_cpp_bridge_service_func;
+ service.callback_userdata = (void *)cpp;
+
+ if (rte_service_component_register(&service,
+ &hw->nfp_cpp_service_id))
+ RTE_LOG(ERR, PMD, "NFP CPP bridge service register() failed");
+ else
+ RTE_LOG(DEBUG, PMD, "NFP CPP bridge service registered");
+
+ return 0;
+
+hwqueues_cleanup:
+ nfp_cpp_area_free(pf_dev->hwqueues_area);
+ctrl_area_cleanup:
+ nfp_cpp_area_free(pf_dev->ctrl_area);
+pf_cleanup:
+ rte_free(pf_dev);
+sym_tbl_cleanup:
+ free(sym_tbl);
+eth_table_cleanup:
free(nfp_eth_table);
+hwinfo_cleanup:
+ free(hwinfo);
+error:
return ret;
}
-int nfp_logtype_init;
-int nfp_logtype_driver;
+static int nfp_pf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
+ struct rte_pci_device *dev)
+{
+ return rte_eth_dev_pci_generic_probe(dev,
+ sizeof(struct nfp_net_hw), nfp_pf_init);
+}
static const struct rte_pci_id pci_id_nfp_pf_net_map[] = {
{
},
};
+static int nfp_pci_uninit(struct rte_eth_dev *eth_dev)
+{
+ struct rte_pci_device *pci_dev;
+ uint16_t port_id;
+
+ pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
+
+ if (pci_dev->id.device_id == PCI_DEVICE_ID_NFP4000_PF_NIC ||
+ pci_dev->id.device_id == PCI_DEVICE_ID_NFP6000_PF_NIC) {
+ /* Free up all physical ports under PF */
+ RTE_ETH_FOREACH_DEV_OF(port_id, &pci_dev->device)
+ rte_eth_dev_close(port_id);
+ /*
+ * Ports can be closed and freed but hotplugging is not
+ * currently supported
+ */
+ return -ENOTSUP;
+ }
+
+ /* VF cleanup, just free private port data */
+ return nfp_net_close(eth_dev);
+}
+
static int eth_nfp_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
struct rte_pci_device *pci_dev)
{
static int eth_nfp_pci_remove(struct rte_pci_device *pci_dev)
{
- struct rte_eth_dev *eth_dev;
- struct nfp_net_hw *hw, *hwport0;
- int port = 0;
-
- eth_dev = rte_eth_dev_allocated(pci_dev->device.name);
- if ((pci_dev->id.device_id == PCI_DEVICE_ID_NFP4000_PF_NIC) ||
- (pci_dev->id.device_id == PCI_DEVICE_ID_NFP6000_PF_NIC)) {
- port = get_pf_port_number(eth_dev->data->name);
- /*
- * hotplug is not possible with multiport PF although freeing
- * data structures can be done for first port.
- */
- if (port != 0)
- return -ENOTSUP;
- hwport0 = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
- hw = &hwport0[port];
- nfp_cpp_area_free(hw->ctrl_area);
- nfp_cpp_area_free(hw->hwqueues_area);
- free(hw->hwinfo);
- free(hw->sym_tbl);
- nfp_cpp_free(hw->cpp);
- } else {
- hw = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
- }
- /* hotplug is not possible with multiport PF */
- if (hw->pf_multiport_enabled)
- return -ENOTSUP;
- return rte_eth_dev_pci_generic_remove(pci_dev, NULL);
+ return rte_eth_dev_pci_generic_remove(pci_dev, nfp_pci_uninit);
}
static struct rte_pci_driver rte_nfp_net_pf_pmd = {
RTE_PMD_REGISTER_PCI_TABLE(net_nfp_vf, pci_id_nfp_vf_net_map);
RTE_PMD_REGISTER_KMOD_DEP(net_nfp_pf, "* igb_uio | uio_pci_generic | vfio");
RTE_PMD_REGISTER_KMOD_DEP(net_nfp_vf, "* igb_uio | uio_pci_generic | vfio");
-
-RTE_INIT(nfp_init_log);
-static void
-nfp_init_log(void)
-{
- nfp_logtype_init = rte_log_register("pmd.net.nfp.init");
- if (nfp_logtype_init >= 0)
- rte_log_set_level(nfp_logtype_init, RTE_LOG_NOTICE);
- nfp_logtype_driver = rte_log_register("pmd.net.nfp.driver");
- if (nfp_logtype_driver >= 0)
- rte_log_set_level(nfp_logtype_driver, RTE_LOG_NOTICE);
-}
+RTE_LOG_REGISTER_SUFFIX(nfp_logtype_init, init, NOTICE);
+RTE_LOG_REGISTER_SUFFIX(nfp_logtype_driver, driver, NOTICE);
/*
* Local variables:
* c-file-style: "Linux"