return -EINVAL;
}
- /* Checking RX offloads */
- if (!(rxmode->offloads & DEV_RX_OFFLOAD_CRC_STRIP))
+ /* KEEP_CRC offload flag is not supported by PMD
+ * can remove the below block when DEV_RX_OFFLOAD_CRC_STRIP removed
+ */
+ if (rte_eth_dev_must_keep_crc(rxmode->offloads))
PMD_INIT_LOG(INFO, "HW does strip CRC. No configurable!");
return 0;
uint32_t tmp;
tmp = rte_be_to_cpu_32(nn_cfg_readl(hw, NFP_NET_CFG_MACADDR));
- memcpy(&hw->mac_addr[0], &tmp, sizeof(struct ether_addr));
+ memcpy(&hw->mac_addr[0], &tmp, 4);
tmp = rte_be_to_cpu_32(nn_cfg_readl(hw, NFP_NET_CFG_MACADDR + 4));
memcpy(&hw->mac_addr[4], &tmp, 2);
DEV_RX_OFFLOAD_UDP_CKSUM |
DEV_RX_OFFLOAD_TCP_CKSUM;
- dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+ dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_JUMBO_FRAME |
+ DEV_RX_OFFLOAD_KEEP_CRC;
if (hw->cap & NFP_NET_CFG_CTRL_TXVLAN)
dev_info->tx_offload_capa = DEV_TX_OFFLOAD_VLAN_INSERT;
/* switch to jumbo mode if needed */
if ((uint32_t)mtu > ETHER_MAX_LEN)
- dev->data->dev_conf.rxmode.jumbo_frame = 1;
+ dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
else
- dev->data->dev_conf.rxmode.jumbo_frame = 0;
+ dev->data->dev_conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
/* update max frame size */
dev->data->dev_conf.rxmode.max_rx_pkt_len = (uint32_t)mtu;
rxq->rx_count = nb_desc;
rxq->port_id = dev->data->port_id;
rxq->rx_free_thresh = rx_conf->rx_free_thresh;
- rxq->crc_len = (uint8_t) ((dev->data->dev_conf.rxmode.hw_strip_crc) ? 0
- : ETHER_CRC_LEN);
rxq->drop_en = rx_conf->rx_drop_en;
/*
txq->wr_p = 0;
pkt_size -= dma_size;
- if (!pkt_size)
- /* End of packet */
- txds->offset_eop |= PCIE_DESC_TX_EOP;
+
+ /*
+ * Making the EOP, packets with just one segment
+ * the priority
+ */
+ if (likely(!pkt_size))
+ txds->offset_eop = PCIE_DESC_TX_EOP;
else
- txds->offset_eop &= PCIE_DESC_TX_OFFSET_MASK;
+ txds->offset_eop = 0;
pkt = pkt->next;
/* Referencing next free TX descriptor */
struct nfp_cpp *cpp = nsp->cpp;
int fw_f;
char *fw_buf;
- char fw_name[100];
- char serial[100];
+ char fw_name[125];
+ char serial[40];
struct stat file_stat;
off_t fsize, bytes;
if (!dev)
return ret;
- cpp = nfp_cpp_from_device_name(dev->device.name);
+ /*
+ * When device bound to UIO, the device could be used, by mistake,
+ * by two DPDK apps, and the UIO driver does not avoid it. This
+ * could lead to a serious problem when configuring the NFP CPP
+ * interface. Here we avoid this telling to the CPP init code to
+ * use a lock file if UIO is being used.
+ */
+ if (dev->kdrv == RTE_KDRV_VFIO)
+ cpp = nfp_cpp_from_device_name(dev, 0);
+ else
+ cpp = nfp_cpp_from_device_name(dev, 1);
+
if (!cpp) {
PMD_DRV_LOG(ERR, "A CPP handle can not be obtained");
ret = -EIO;