#include <rte_common.h>
#include <ethdev_pci.h>
+#include <rte_alarm.h>
+
#include "ngbe_logs.h"
#include "ngbe.h"
#include "ngbe_ethdev.h"
+#include "ngbe_rxtx.h"
static int ngbe_dev_close(struct rte_eth_dev *dev);
+static int ngbe_dev_link_update(struct rte_eth_dev *dev,
+ int wait_to_complete);
+
+static void ngbe_dev_link_status_print(struct rte_eth_dev *dev);
+static int ngbe_dev_lsc_interrupt_setup(struct rte_eth_dev *dev, uint8_t on);
+static int ngbe_dev_macsec_interrupt_setup(struct rte_eth_dev *dev);
+static int ngbe_dev_misc_interrupt_setup(struct rte_eth_dev *dev);
+static int ngbe_dev_rxq_interrupt_setup(struct rte_eth_dev *dev);
+static void ngbe_dev_interrupt_handler(void *param);
+static void ngbe_dev_interrupt_delayed_handler(void *param);
+static void ngbe_configure_msix(struct rte_eth_dev *dev);
/*
* The set of PCI devices this driver supports
{ .vendor_id = 0, /* sentinel */ },
};
+static const struct rte_eth_desc_lim rx_desc_lim = {
+ .nb_max = NGBE_RING_DESC_MAX,
+ .nb_min = NGBE_RING_DESC_MIN,
+ .nb_align = NGBE_RXD_ALIGN,
+};
+
+static const struct rte_eth_desc_lim tx_desc_lim = {
+ .nb_max = NGBE_RING_DESC_MAX,
+ .nb_min = NGBE_RING_DESC_MIN,
+ .nb_align = NGBE_TXD_ALIGN,
+ .nb_seg_max = NGBE_TX_MAX_SEG,
+ .nb_mtu_seg_max = NGBE_TX_MAX_SEG,
+};
+
+static const struct eth_dev_ops ngbe_eth_dev_ops;
+
+static inline int32_t
+ngbe_pf_reset_hw(struct ngbe_hw *hw)
+{
+ uint32_t ctrl_ext;
+ int32_t status;
+
+ status = hw->mac.reset_hw(hw);
+
+ ctrl_ext = rd32(hw, NGBE_PORTCTL);
+ /* Set PF Reset Done bit so PF/VF Mail Ops can work */
+ ctrl_ext |= NGBE_PORTCTL_RSTDONE;
+ wr32(hw, NGBE_PORTCTL, ctrl_ext);
+ ngbe_flush(hw);
+
+ if (status == NGBE_ERR_SFP_NOT_PRESENT)
+ status = 0;
+ return status;
+}
+
+static inline void
+ngbe_enable_intr(struct rte_eth_dev *dev)
+{
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+
+ wr32(hw, NGBE_IENMISC, intr->mask_misc);
+ wr32(hw, NGBE_IMC(0), intr->mask & BIT_MASK32);
+ ngbe_flush(hw);
+}
+
+static void
+ngbe_disable_intr(struct ngbe_hw *hw)
+{
+ PMD_INIT_FUNC_TRACE();
+
+ wr32(hw, NGBE_IMS(0), NGBE_IMS_MASK);
+ ngbe_flush(hw);
+}
+
/*
* Ensure that all locks are released before first NVM or PHY access
*/
{
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
struct ngbe_hw *hw = ngbe_dev_hw(eth_dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
const struct rte_memzone *mz;
+ uint32_t ctrl_ext;
int err;
PMD_INIT_FUNC_TRACE();
+ eth_dev->dev_ops = &ngbe_eth_dev_ops;
+ eth_dev->rx_pkt_burst = &ngbe_recv_pkts;
+ eth_dev->tx_pkt_burst = &ngbe_xmit_pkts_simple;
+
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
return -EIO;
}
+ /* disable interrupt */
+ ngbe_disable_intr(hw);
+
+ /* Allocate memory for storing MAC addresses */
+ eth_dev->data->mac_addrs = rte_zmalloc("ngbe", RTE_ETHER_ADDR_LEN *
+ hw->mac.num_rar_entries, 0);
+ if (eth_dev->data->mac_addrs == NULL) {
+ PMD_INIT_LOG(ERR,
+ "Failed to allocate %u bytes needed to store MAC addresses",
+ RTE_ETHER_ADDR_LEN * hw->mac.num_rar_entries);
+ return -ENOMEM;
+ }
+
+ /* Copy the permanent MAC address */
+ rte_ether_addr_copy((struct rte_ether_addr *)hw->mac.perm_addr,
+ ð_dev->data->mac_addrs[0]);
+
+ /* Allocate memory for storing hash filter MAC addresses */
+ eth_dev->data->hash_mac_addrs = rte_zmalloc("ngbe",
+ RTE_ETHER_ADDR_LEN * NGBE_VMDQ_NUM_UC_MAC, 0);
+ if (eth_dev->data->hash_mac_addrs == NULL) {
+ PMD_INIT_LOG(ERR,
+ "Failed to allocate %d bytes needed to store MAC addresses",
+ RTE_ETHER_ADDR_LEN * NGBE_VMDQ_NUM_UC_MAC);
+ rte_free(eth_dev->data->mac_addrs);
+ eth_dev->data->mac_addrs = NULL;
+ return -ENOMEM;
+ }
+
+ ctrl_ext = rd32(hw, NGBE_PORTCTL);
+ /* let hardware know driver is loaded */
+ ctrl_ext |= NGBE_PORTCTL_DRVLOAD;
+ /* Set PF Reset Done bit so PF/VF Mail Ops can work */
+ ctrl_ext |= NGBE_PORTCTL_RSTDONE;
+ wr32(hw, NGBE_PORTCTL, ctrl_ext);
+ ngbe_flush(hw);
+
+ PMD_INIT_LOG(DEBUG, "MAC: %d, PHY: %d",
+ (int)hw->mac.type, (int)hw->phy.type);
+
+ PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x",
+ eth_dev->data->port_id, pci_dev->id.vendor_id,
+ pci_dev->id.device_id);
+
+ rte_intr_callback_register(intr_handle,
+ ngbe_dev_interrupt_handler, eth_dev);
+
+ /* enable uio/vfio intr/eventfd mapping */
+ rte_intr_enable(intr_handle);
+
+ /* enable support intr */
+ ngbe_enable_intr(eth_dev);
+
return 0;
}
ngbe_dev_close(eth_dev);
- return -EINVAL;
+ return 0;
}
static int
static struct rte_pci_driver rte_ngbe_pmd = {
.id_table = pci_id_ngbe_map,
- .drv_flags = RTE_PCI_DRV_NEED_MAPPING,
+ .drv_flags = RTE_PCI_DRV_NEED_MAPPING |
+ RTE_PCI_DRV_INTR_LSC,
.probe = eth_ngbe_pci_probe,
.remove = eth_ngbe_pci_remove,
};
+static int
+ngbe_dev_configure(struct rte_eth_dev *dev)
+{
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ struct ngbe_adapter *adapter = ngbe_dev_adapter(dev);
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* set flag to update link status after init */
+ intr->flags |= NGBE_FLAG_NEED_LINK_UPDATE;
+
+ /*
+ * Initialize to TRUE. If any of Rx queues doesn't meet the bulk
+ * allocation Rx preconditions we will reset it.
+ */
+ adapter->rx_bulk_alloc_allowed = true;
+
+ return 0;
+}
+
+static void
+ngbe_dev_phy_intr_setup(struct rte_eth_dev *dev)
+{
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+
+ wr32(hw, NGBE_GPIODIR, NGBE_GPIODIR_DDR(1));
+ wr32(hw, NGBE_GPIOINTEN, NGBE_GPIOINTEN_INT(3));
+ wr32(hw, NGBE_GPIOINTTYPE, NGBE_GPIOINTTYPE_LEVEL(0));
+ if (hw->phy.type == ngbe_phy_yt8521s_sfi)
+ wr32(hw, NGBE_GPIOINTPOL, NGBE_GPIOINTPOL_ACT(0));
+ else
+ wr32(hw, NGBE_GPIOINTPOL, NGBE_GPIOINTPOL_ACT(3));
+
+ intr->mask_misc |= NGBE_ICRMISC_GPIO;
+}
+
+/*
+ * Configure device link speed and setup link.
+ * It returns 0 on success.
+ */
+static int
+ngbe_dev_start(struct rte_eth_dev *dev)
+{
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+ uint32_t intr_vector = 0;
+ int err;
+ bool link_up = false, negotiate = false;
+ uint32_t speed = 0;
+ uint32_t allowed_speeds = 0;
+ int status;
+ uint32_t *link_speeds;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* disable uio/vfio intr/eventfd mapping */
+ rte_intr_disable(intr_handle);
+
+ /* stop adapter */
+ hw->adapter_stopped = 0;
+ ngbe_stop_hw(hw);
+
+ /* reinitialize adapter, this calls reset and start */
+ hw->nb_rx_queues = dev->data->nb_rx_queues;
+ hw->nb_tx_queues = dev->data->nb_tx_queues;
+ status = ngbe_pf_reset_hw(hw);
+ if (status != 0)
+ return -1;
+ hw->mac.start_hw(hw);
+ hw->mac.get_link_status = true;
+
+ ngbe_dev_phy_intr_setup(dev);
+
+ /* check and configure queue intr-vector mapping */
+ if ((rte_intr_cap_multiple(intr_handle) ||
+ !RTE_ETH_DEV_SRIOV(dev).active) &&
+ dev->data->dev_conf.intr_conf.rxq != 0) {
+ intr_vector = dev->data->nb_rx_queues;
+ if (rte_intr_efd_enable(intr_handle, intr_vector))
+ return -1;
+ }
+
+ if (rte_intr_dp_is_en(intr_handle) && intr_handle->intr_vec == NULL) {
+ intr_handle->intr_vec =
+ rte_zmalloc("intr_vec",
+ dev->data->nb_rx_queues * sizeof(int), 0);
+ if (intr_handle->intr_vec == NULL) {
+ PMD_INIT_LOG(ERR,
+ "Failed to allocate %d rx_queues intr_vec",
+ dev->data->nb_rx_queues);
+ return -ENOMEM;
+ }
+ }
+
+ /* confiugre MSI-X for sleep until Rx interrupt */
+ ngbe_configure_msix(dev);
+
+ /* initialize transmission unit */
+ ngbe_dev_tx_init(dev);
+
+ /* This can fail when allocating mbufs for descriptor rings */
+ err = ngbe_dev_rx_init(dev);
+ if (err != 0) {
+ PMD_INIT_LOG(ERR, "Unable to initialize Rx hardware");
+ goto error;
+ }
+
+ err = ngbe_dev_rxtx_start(dev);
+ if (err < 0) {
+ PMD_INIT_LOG(ERR, "Unable to start rxtx queues");
+ goto error;
+ }
+
+ err = hw->mac.check_link(hw, &speed, &link_up, 0);
+ if (err != 0)
+ goto error;
+ dev->data->dev_link.link_status = link_up;
+
+ link_speeds = &dev->data->dev_conf.link_speeds;
+ if (*link_speeds == ETH_LINK_SPEED_AUTONEG)
+ negotiate = true;
+
+ err = hw->mac.get_link_capabilities(hw, &speed, &negotiate);
+ if (err != 0)
+ goto error;
+
+ allowed_speeds = 0;
+ if (hw->mac.default_speeds & NGBE_LINK_SPEED_1GB_FULL)
+ allowed_speeds |= ETH_LINK_SPEED_1G;
+ if (hw->mac.default_speeds & NGBE_LINK_SPEED_100M_FULL)
+ allowed_speeds |= ETH_LINK_SPEED_100M;
+ if (hw->mac.default_speeds & NGBE_LINK_SPEED_10M_FULL)
+ allowed_speeds |= ETH_LINK_SPEED_10M;
+
+ if (*link_speeds & ~allowed_speeds) {
+ PMD_INIT_LOG(ERR, "Invalid link setting");
+ goto error;
+ }
+
+ speed = 0x0;
+ if (*link_speeds == ETH_LINK_SPEED_AUTONEG) {
+ speed = hw->mac.default_speeds;
+ } else {
+ if (*link_speeds & ETH_LINK_SPEED_1G)
+ speed |= NGBE_LINK_SPEED_1GB_FULL;
+ if (*link_speeds & ETH_LINK_SPEED_100M)
+ speed |= NGBE_LINK_SPEED_100M_FULL;
+ if (*link_speeds & ETH_LINK_SPEED_10M)
+ speed |= NGBE_LINK_SPEED_10M_FULL;
+ }
+
+ hw->phy.init_hw(hw);
+ err = hw->mac.setup_link(hw, speed, link_up);
+ if (err != 0)
+ goto error;
+
+ if (rte_intr_allow_others(intr_handle)) {
+ ngbe_dev_misc_interrupt_setup(dev);
+ /* check if lsc interrupt is enabled */
+ if (dev->data->dev_conf.intr_conf.lsc != 0)
+ ngbe_dev_lsc_interrupt_setup(dev, TRUE);
+ else
+ ngbe_dev_lsc_interrupt_setup(dev, FALSE);
+ ngbe_dev_macsec_interrupt_setup(dev);
+ ngbe_set_ivar_map(hw, -1, 1, NGBE_MISC_VEC_ID);
+ } else {
+ rte_intr_callback_unregister(intr_handle,
+ ngbe_dev_interrupt_handler, dev);
+ if (dev->data->dev_conf.intr_conf.lsc != 0)
+ PMD_INIT_LOG(INFO,
+ "LSC won't enable because of no intr multiplex");
+ }
+
+ /* check if rxq interrupt is enabled */
+ if (dev->data->dev_conf.intr_conf.rxq != 0 &&
+ rte_intr_dp_is_en(intr_handle))
+ ngbe_dev_rxq_interrupt_setup(dev);
+
+ /* enable UIO/VFIO intr/eventfd mapping */
+ rte_intr_enable(intr_handle);
+
+ /* resume enabled intr since HW reset */
+ ngbe_enable_intr(dev);
+
+ if ((hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_M88E1512_SFP ||
+ (hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_YT8521S_SFP) {
+ /* gpio0 is used to power on/off control*/
+ wr32(hw, NGBE_GPIODATA, 0);
+ }
+
+ /*
+ * Update link status right before return, because it may
+ * start link configuration process in a separate thread.
+ */
+ ngbe_dev_link_update(dev, 0);
+
+ return 0;
+
+error:
+ PMD_INIT_LOG(ERR, "failure in dev start: %d", err);
+ ngbe_dev_clear_queues(dev);
+ return -EIO;
+}
+
+/*
+ * Stop device: disable rx and tx functions to allow for reconfiguring.
+ */
+static int
+ngbe_dev_stop(struct rte_eth_dev *dev)
+{
+ struct rte_eth_link link;
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+
+ if (hw->adapter_stopped)
+ return 0;
+
+ PMD_INIT_FUNC_TRACE();
+
+ if ((hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_M88E1512_SFP ||
+ (hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_YT8521S_SFP) {
+ /* gpio0 is used to power on/off control*/
+ wr32(hw, NGBE_GPIODATA, NGBE_GPIOBIT_0);
+ }
+
+ /* disable interrupts */
+ ngbe_disable_intr(hw);
+
+ /* reset the NIC */
+ ngbe_pf_reset_hw(hw);
+ hw->adapter_stopped = 0;
+
+ /* stop adapter */
+ ngbe_stop_hw(hw);
+
+ ngbe_dev_clear_queues(dev);
+
+ /* Clear recorded link status */
+ memset(&link, 0, sizeof(link));
+ rte_eth_linkstatus_set(dev, &link);
+
+ if (!rte_intr_allow_others(intr_handle))
+ /* resume to the default handler */
+ rte_intr_callback_register(intr_handle,
+ ngbe_dev_interrupt_handler,
+ (void *)dev);
+
+ /* Clean datapath event and queue/vec mapping */
+ rte_intr_efd_disable(intr_handle);
+ if (intr_handle->intr_vec != NULL) {
+ rte_free(intr_handle->intr_vec);
+ intr_handle->intr_vec = NULL;
+ }
+
+ hw->adapter_stopped = true;
+ dev->data->dev_started = 0;
+
+ return 0;
+}
+
/*
* Reset and stop device.
*/
static int
ngbe_dev_close(struct rte_eth_dev *dev)
{
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+ int retries = 0;
+ int ret;
+
PMD_INIT_FUNC_TRACE();
- RTE_SET_USED(dev);
+ ngbe_pf_reset_hw(hw);
+
+ ngbe_dev_stop(dev);
+
+ ngbe_dev_free_queues(dev);
+
+ /* reprogram the RAR[0] in case user changed it. */
+ ngbe_set_rar(hw, 0, hw->mac.addr, 0, true);
+
+ /* Unlock any pending hardware semaphore */
+ ngbe_swfw_lock_reset(hw);
+
+ /* disable uio intr before callback unregister */
+ rte_intr_disable(intr_handle);
+
+ do {
+ ret = rte_intr_callback_unregister(intr_handle,
+ ngbe_dev_interrupt_handler, dev);
+ if (ret >= 0 || ret == -ENOENT) {
+ break;
+ } else if (ret != -EAGAIN) {
+ PMD_INIT_LOG(ERR,
+ "intr callback unregister failed: %d",
+ ret);
+ }
+ rte_delay_ms(100);
+ } while (retries++ < (10 + NGBE_LINK_UP_TIME));
+
+ rte_free(dev->data->mac_addrs);
+ dev->data->mac_addrs = NULL;
+
+ rte_free(dev->data->hash_mac_addrs);
+ dev->data->hash_mac_addrs = NULL;
+
+ return ret;
+}
+
+/*
+ * Reset PF device.
+ */
+static int
+ngbe_dev_reset(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ ret = eth_ngbe_dev_uninit(dev);
+ if (ret != 0)
+ return ret;
+
+ ret = eth_ngbe_dev_init(dev, NULL);
+
+ return ret;
+}
+
+static int
+ngbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
+{
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+
+ dev_info->max_rx_queues = (uint16_t)hw->mac.max_rx_queues;
+ dev_info->max_tx_queues = (uint16_t)hw->mac.max_tx_queues;
+ dev_info->min_rx_bufsize = 1024;
+ dev_info->max_rx_pktlen = 15872;
+
+ dev_info->default_rxconf = (struct rte_eth_rxconf) {
+ .rx_thresh = {
+ .pthresh = NGBE_DEFAULT_RX_PTHRESH,
+ .hthresh = NGBE_DEFAULT_RX_HTHRESH,
+ .wthresh = NGBE_DEFAULT_RX_WTHRESH,
+ },
+ .rx_free_thresh = NGBE_DEFAULT_RX_FREE_THRESH,
+ .rx_drop_en = 0,
+ .offloads = 0,
+ };
+
+ dev_info->default_txconf = (struct rte_eth_txconf) {
+ .tx_thresh = {
+ .pthresh = NGBE_DEFAULT_TX_PTHRESH,
+ .hthresh = NGBE_DEFAULT_TX_HTHRESH,
+ .wthresh = NGBE_DEFAULT_TX_WTHRESH,
+ },
+ .tx_free_thresh = NGBE_DEFAULT_TX_FREE_THRESH,
+ .offloads = 0,
+ };
+
+ dev_info->rx_desc_lim = rx_desc_lim;
+ dev_info->tx_desc_lim = tx_desc_lim;
+
+ dev_info->speed_capa = ETH_LINK_SPEED_1G | ETH_LINK_SPEED_100M |
+ ETH_LINK_SPEED_10M;
+
+ /* Driver-preferred Rx/Tx parameters */
+ dev_info->default_rxportconf.burst_size = 32;
+ dev_info->default_txportconf.burst_size = 32;
+ dev_info->default_rxportconf.nb_queues = 1;
+ dev_info->default_txportconf.nb_queues = 1;
+ dev_info->default_rxportconf.ring_size = 256;
+ dev_info->default_txportconf.ring_size = 256;
+
+ return 0;
+}
+
+/* return 0 means link status changed, -1 means not changed */
+int
+ngbe_dev_link_update_share(struct rte_eth_dev *dev,
+ int wait_to_complete)
+{
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct rte_eth_link link;
+ u32 link_speed = NGBE_LINK_SPEED_UNKNOWN;
+ u32 lan_speed = 0;
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ bool link_up;
+ int err;
+ int wait = 1;
+
+ memset(&link, 0, sizeof(link));
+ link.link_status = ETH_LINK_DOWN;
+ link.link_speed = ETH_SPEED_NUM_NONE;
+ link.link_duplex = ETH_LINK_HALF_DUPLEX;
+ link.link_autoneg = !(dev->data->dev_conf.link_speeds &
+ ~ETH_LINK_SPEED_AUTONEG);
+
+ hw->mac.get_link_status = true;
+
+ if (intr->flags & NGBE_FLAG_NEED_LINK_CONFIG)
+ return rte_eth_linkstatus_set(dev, &link);
+
+ /* check if it needs to wait to complete, if lsc interrupt is enabled */
+ if (wait_to_complete == 0 || dev->data->dev_conf.intr_conf.lsc != 0)
+ wait = 0;
+
+ err = hw->mac.check_link(hw, &link_speed, &link_up, wait);
+ if (err != 0) {
+ link.link_speed = ETH_SPEED_NUM_NONE;
+ link.link_duplex = ETH_LINK_FULL_DUPLEX;
+ return rte_eth_linkstatus_set(dev, &link);
+ }
+
+ if (!link_up)
+ return rte_eth_linkstatus_set(dev, &link);
+
+ intr->flags &= ~NGBE_FLAG_NEED_LINK_CONFIG;
+ link.link_status = ETH_LINK_UP;
+ link.link_duplex = ETH_LINK_FULL_DUPLEX;
+
+ switch (link_speed) {
+ default:
+ case NGBE_LINK_SPEED_UNKNOWN:
+ link.link_speed = ETH_SPEED_NUM_NONE;
+ break;
- return -EINVAL;
+ case NGBE_LINK_SPEED_10M_FULL:
+ link.link_speed = ETH_SPEED_NUM_10M;
+ lan_speed = 0;
+ break;
+
+ case NGBE_LINK_SPEED_100M_FULL:
+ link.link_speed = ETH_SPEED_NUM_100M;
+ lan_speed = 1;
+ break;
+
+ case NGBE_LINK_SPEED_1GB_FULL:
+ link.link_speed = ETH_SPEED_NUM_1G;
+ lan_speed = 2;
+ break;
+ }
+
+ if (hw->is_pf) {
+ wr32m(hw, NGBE_LAN_SPEED, NGBE_LAN_SPEED_MASK, lan_speed);
+ if (link_speed & (NGBE_LINK_SPEED_1GB_FULL |
+ NGBE_LINK_SPEED_100M_FULL |
+ NGBE_LINK_SPEED_10M_FULL)) {
+ wr32m(hw, NGBE_MACTXCFG, NGBE_MACTXCFG_SPEED_MASK,
+ NGBE_MACTXCFG_SPEED_1G | NGBE_MACTXCFG_TE);
+ }
+ }
+
+ return rte_eth_linkstatus_set(dev, &link);
+}
+
+static int
+ngbe_dev_link_update(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ return ngbe_dev_link_update_share(dev, wait_to_complete);
}
+/**
+ * It clears the interrupt causes and enables the interrupt.
+ * It will be called once only during NIC initialized.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ * @param on
+ * Enable or Disable.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+ngbe_dev_lsc_interrupt_setup(struct rte_eth_dev *dev, uint8_t on)
+{
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+
+ ngbe_dev_link_status_print(dev);
+ if (on != 0) {
+ intr->mask_misc |= NGBE_ICRMISC_PHY;
+ intr->mask_misc |= NGBE_ICRMISC_GPIO;
+ } else {
+ intr->mask_misc &= ~NGBE_ICRMISC_PHY;
+ intr->mask_misc &= ~NGBE_ICRMISC_GPIO;
+ }
+
+ return 0;
+}
+
+/**
+ * It clears the interrupt causes and enables the interrupt.
+ * It will be called once only during NIC initialized.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+ngbe_dev_misc_interrupt_setup(struct rte_eth_dev *dev)
+{
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ u64 mask;
+
+ mask = NGBE_ICR_MASK;
+ mask &= (1ULL << NGBE_MISC_VEC_ID);
+ intr->mask |= mask;
+ intr->mask_misc |= NGBE_ICRMISC_GPIO;
+
+ return 0;
+}
+
+/**
+ * It clears the interrupt causes and enables the interrupt.
+ * It will be called once only during NIC initialized.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+ngbe_dev_rxq_interrupt_setup(struct rte_eth_dev *dev)
+{
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ u64 mask;
+
+ mask = NGBE_ICR_MASK;
+ mask &= ~((1ULL << NGBE_RX_VEC_START) - 1);
+ intr->mask |= mask;
+
+ return 0;
+}
+
+/**
+ * It clears the interrupt causes and enables the interrupt.
+ * It will be called once only during NIC initialized.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+ngbe_dev_macsec_interrupt_setup(struct rte_eth_dev *dev)
+{
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+
+ intr->mask_misc |= NGBE_ICRMISC_LNKSEC;
+
+ return 0;
+}
+
+/*
+ * It reads ICR and sets flag for the link_update.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+ngbe_dev_interrupt_get_status(struct rte_eth_dev *dev)
+{
+ uint32_t eicr;
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+
+ /* clear all cause mask */
+ ngbe_disable_intr(hw);
+
+ /* read-on-clear nic registers here */
+ eicr = ((u32 *)hw->isb_mem)[NGBE_ISB_MISC];
+ PMD_DRV_LOG(DEBUG, "eicr %x", eicr);
+
+ intr->flags = 0;
+
+ /* set flag for async link update */
+ if (eicr & NGBE_ICRMISC_PHY)
+ intr->flags |= NGBE_FLAG_NEED_LINK_UPDATE;
+
+ if (eicr & NGBE_ICRMISC_VFMBX)
+ intr->flags |= NGBE_FLAG_MAILBOX;
+
+ if (eicr & NGBE_ICRMISC_LNKSEC)
+ intr->flags |= NGBE_FLAG_MACSEC;
+
+ if (eicr & NGBE_ICRMISC_GPIO)
+ intr->flags |= NGBE_FLAG_NEED_LINK_UPDATE;
+
+ return 0;
+}
+
+/**
+ * It gets and then prints the link status.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static void
+ngbe_dev_link_status_print(struct rte_eth_dev *dev)
+{
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_eth_link link;
+
+ rte_eth_linkstatus_get(dev, &link);
+
+ if (link.link_status == ETH_LINK_UP) {
+ PMD_INIT_LOG(INFO, "Port %d: Link Up - speed %u Mbps - %s",
+ (int)(dev->data->port_id),
+ (unsigned int)link.link_speed,
+ link.link_duplex == ETH_LINK_FULL_DUPLEX ?
+ "full-duplex" : "half-duplex");
+ } else {
+ PMD_INIT_LOG(INFO, " Port %d: Link Down",
+ (int)(dev->data->port_id));
+ }
+ PMD_INIT_LOG(DEBUG, "PCI Address: " PCI_PRI_FMT,
+ pci_dev->addr.domain,
+ pci_dev->addr.bus,
+ pci_dev->addr.devid,
+ pci_dev->addr.function);
+}
+
+/*
+ * It executes link_update after knowing an interrupt occurred.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+static int
+ngbe_dev_interrupt_action(struct rte_eth_dev *dev)
+{
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ int64_t timeout;
+
+ PMD_DRV_LOG(DEBUG, "intr action type %d", intr->flags);
+
+ if (intr->flags & NGBE_FLAG_NEED_LINK_UPDATE) {
+ struct rte_eth_link link;
+
+ /*get the link status before link update, for predicting later*/
+ rte_eth_linkstatus_get(dev, &link);
+
+ ngbe_dev_link_update(dev, 0);
+
+ /* likely to up */
+ if (link.link_status != ETH_LINK_UP)
+ /* handle it 1 sec later, wait it being stable */
+ timeout = NGBE_LINK_UP_CHECK_TIMEOUT;
+ /* likely to down */
+ else
+ /* handle it 4 sec later, wait it being stable */
+ timeout = NGBE_LINK_DOWN_CHECK_TIMEOUT;
+
+ ngbe_dev_link_status_print(dev);
+ if (rte_eal_alarm_set(timeout * 1000,
+ ngbe_dev_interrupt_delayed_handler,
+ (void *)dev) < 0) {
+ PMD_DRV_LOG(ERR, "Error setting alarm");
+ } else {
+ /* remember original mask */
+ intr->mask_misc_orig = intr->mask_misc;
+ /* only disable lsc interrupt */
+ intr->mask_misc &= ~NGBE_ICRMISC_PHY;
+
+ intr->mask_orig = intr->mask;
+ /* only disable all misc interrupts */
+ intr->mask &= ~(1ULL << NGBE_MISC_VEC_ID);
+ }
+ }
+
+ PMD_DRV_LOG(DEBUG, "enable intr immediately");
+ ngbe_enable_intr(dev);
+
+ return 0;
+}
+
+/**
+ * Interrupt handler which shall be registered for alarm callback for delayed
+ * handling specific interrupt to wait for the stable nic state. As the
+ * NIC interrupt state is not stable for ngbe after link is just down,
+ * it needs to wait 4 seconds to get the stable status.
+ *
+ * @param param
+ * The address of parameter (struct rte_eth_dev *) registered before.
+ */
+static void
+ngbe_dev_interrupt_delayed_handler(void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ uint32_t eicr;
+
+ ngbe_disable_intr(hw);
+
+ eicr = ((u32 *)hw->isb_mem)[NGBE_ISB_MISC];
+
+ if (intr->flags & NGBE_FLAG_NEED_LINK_UPDATE) {
+ ngbe_dev_link_update(dev, 0);
+ intr->flags &= ~NGBE_FLAG_NEED_LINK_UPDATE;
+ ngbe_dev_link_status_print(dev);
+ rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC,
+ NULL);
+ }
+
+ if (intr->flags & NGBE_FLAG_MACSEC) {
+ rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_MACSEC,
+ NULL);
+ intr->flags &= ~NGBE_FLAG_MACSEC;
+ }
+
+ /* restore original mask */
+ intr->mask_misc = intr->mask_misc_orig;
+ intr->mask_misc_orig = 0;
+ intr->mask = intr->mask_orig;
+ intr->mask_orig = 0;
+
+ PMD_DRV_LOG(DEBUG, "enable intr in delayed handler S[%08x]", eicr);
+ ngbe_enable_intr(dev);
+}
+
+/**
+ * Interrupt handler triggered by NIC for handling
+ * specific interrupt.
+ *
+ * @param param
+ * The address of parameter (struct rte_eth_dev *) registered before.
+ */
+static void
+ngbe_dev_interrupt_handler(void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+
+ ngbe_dev_interrupt_get_status(dev);
+ ngbe_dev_interrupt_action(dev);
+}
+
+/**
+ * Set the IVAR registers, mapping interrupt causes to vectors
+ * @param hw
+ * pointer to ngbe_hw struct
+ * @direction
+ * 0 for Rx, 1 for Tx, -1 for other causes
+ * @queue
+ * queue to map the corresponding interrupt to
+ * @msix_vector
+ * the vector to map to the corresponding queue
+ */
+void
+ngbe_set_ivar_map(struct ngbe_hw *hw, int8_t direction,
+ uint8_t queue, uint8_t msix_vector)
+{
+ uint32_t tmp, idx;
+
+ if (direction == -1) {
+ /* other causes */
+ msix_vector |= NGBE_IVARMISC_VLD;
+ idx = 0;
+ tmp = rd32(hw, NGBE_IVARMISC);
+ tmp &= ~(0xFF << idx);
+ tmp |= (msix_vector << idx);
+ wr32(hw, NGBE_IVARMISC, tmp);
+ } else {
+ /* rx or tx causes */
+ /* Workround for ICR lost */
+ idx = ((16 * (queue & 1)) + (8 * direction));
+ tmp = rd32(hw, NGBE_IVAR(queue >> 1));
+ tmp &= ~(0xFF << idx);
+ tmp |= (msix_vector << idx);
+ wr32(hw, NGBE_IVAR(queue >> 1), tmp);
+ }
+}
+
+/**
+ * Sets up the hardware to properly generate MSI-X interrupts
+ * @hw
+ * board private structure
+ */
+static void
+ngbe_configure_msix(struct rte_eth_dev *dev)
+{
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ uint32_t queue_id, base = NGBE_MISC_VEC_ID;
+ uint32_t vec = NGBE_MISC_VEC_ID;
+ uint32_t gpie;
+
+ /*
+ * Won't configure MSI-X register if no mapping is done
+ * between intr vector and event fd
+ * but if MSI-X has been enabled already, need to configure
+ * auto clean, auto mask and throttling.
+ */
+ gpie = rd32(hw, NGBE_GPIE);
+ if (!rte_intr_dp_is_en(intr_handle) &&
+ !(gpie & NGBE_GPIE_MSIX))
+ return;
+
+ if (rte_intr_allow_others(intr_handle)) {
+ base = NGBE_RX_VEC_START;
+ vec = base;
+ }
+
+ /* setup GPIE for MSI-X mode */
+ gpie = rd32(hw, NGBE_GPIE);
+ gpie |= NGBE_GPIE_MSIX;
+ wr32(hw, NGBE_GPIE, gpie);
+
+ /* Populate the IVAR table and set the ITR values to the
+ * corresponding register.
+ */
+ if (rte_intr_dp_is_en(intr_handle)) {
+ for (queue_id = 0; queue_id < dev->data->nb_rx_queues;
+ queue_id++) {
+ /* by default, 1:1 mapping */
+ ngbe_set_ivar_map(hw, 0, queue_id, vec);
+ intr_handle->intr_vec[queue_id] = vec;
+ if (vec < base + intr_handle->nb_efd - 1)
+ vec++;
+ }
+
+ ngbe_set_ivar_map(hw, -1, 1, NGBE_MISC_VEC_ID);
+ }
+ wr32(hw, NGBE_ITR(NGBE_MISC_VEC_ID),
+ NGBE_ITR_IVAL_1G(NGBE_QUEUE_ITR_INTERVAL_DEFAULT)
+ | NGBE_ITR_WRDSA);
+}
+
+static const struct eth_dev_ops ngbe_eth_dev_ops = {
+ .dev_configure = ngbe_dev_configure,
+ .dev_infos_get = ngbe_dev_info_get,
+ .dev_start = ngbe_dev_start,
+ .dev_stop = ngbe_dev_stop,
+ .dev_close = ngbe_dev_close,
+ .dev_reset = ngbe_dev_reset,
+ .link_update = ngbe_dev_link_update,
+ .rx_queue_start = ngbe_dev_rx_queue_start,
+ .rx_queue_stop = ngbe_dev_rx_queue_stop,
+ .tx_queue_start = ngbe_dev_tx_queue_start,
+ .tx_queue_stop = ngbe_dev_tx_queue_stop,
+ .rx_queue_setup = ngbe_dev_rx_queue_setup,
+ .rx_queue_release = ngbe_dev_rx_queue_release,
+ .tx_queue_setup = ngbe_dev_tx_queue_setup,
+ .tx_queue_release = ngbe_dev_tx_queue_release,
+};
+
RTE_PMD_REGISTER_PCI(net_ngbe, rte_ngbe_pmd);
RTE_PMD_REGISTER_PCI_TABLE(net_ngbe, pci_id_ngbe_map);
RTE_PMD_REGISTER_KMOD_DEP(net_ngbe, "* igb_uio | uio_pci_generic | vfio-pci");