ethdev: improve xstats names by IDs get prototype
[dpdk.git] / drivers / net / octeontx2 / otx2_flow_parse.c
index 476195d..63a3314 100644 (file)
@@ -489,13 +489,45 @@ flow_check_lc_ip_tunnel(struct otx2_parse_state *pst)
                pst->tunnel = 1;
 }
 
+static int
+otx2_flow_raw_item_prepare(const struct rte_flow_item_raw *raw_spec,
+                          const struct rte_flow_item_raw *raw_mask,
+                          struct otx2_flow_item_info *info,
+                          uint8_t *spec_buf, uint8_t *mask_buf)
+{
+       uint32_t custom_hdr_size = 0;
+
+       memset(spec_buf, 0, NPC_MAX_RAW_ITEM_LEN);
+       memset(mask_buf, 0, NPC_MAX_RAW_ITEM_LEN);
+       custom_hdr_size = raw_spec->offset + raw_spec->length;
+
+       memcpy(spec_buf + raw_spec->offset, raw_spec->pattern,
+              raw_spec->length);
+
+       if (raw_mask->pattern) {
+               memcpy(mask_buf + raw_spec->offset, raw_mask->pattern,
+                      raw_spec->length);
+       } else {
+               memset(mask_buf + raw_spec->offset, 0xFF, raw_spec->length);
+       }
+
+       info->len = custom_hdr_size;
+       info->spec = spec_buf;
+       info->mask = mask_buf;
+
+       return 0;
+}
+
 /* Outer IPv4, Outer IPv6, MPLS, ARP */
 int
 otx2_flow_parse_lc(struct otx2_parse_state *pst)
 {
+       uint8_t raw_spec_buf[NPC_MAX_RAW_ITEM_LEN];
+       uint8_t raw_mask_buf[NPC_MAX_RAW_ITEM_LEN];
        uint8_t hw_mask[NPC_MAX_EXTRACT_DATA_LEN];
+       const struct rte_flow_item_raw *raw_spec;
        struct otx2_flow_item_info info;
-       int lid, lt;
+       int lid, lt, len;
        int rc;
 
        if (pst->pattern->type == RTE_FLOW_ITEM_TYPE_MPLS)
@@ -531,6 +563,30 @@ otx2_flow_parse_lc(struct otx2_parse_state *pst)
                info.len = sizeof(struct rte_flow_item_ipv6_ext);
                info.hw_hdr_len = 40;
                break;
+       case RTE_FLOW_ITEM_TYPE_RAW:
+               raw_spec = pst->pattern->spec;
+               if (!raw_spec->relative)
+                       return 0;
+
+               len = raw_spec->length + raw_spec->offset;
+               if (len > NPC_MAX_RAW_ITEM_LEN) {
+                       rte_flow_error_set(pst->error, EINVAL,
+                                          RTE_FLOW_ERROR_TYPE_ITEM, NULL,
+                                          "Spec length too big");
+                       return -rte_errno;
+               }
+
+               otx2_flow_raw_item_prepare((const struct rte_flow_item_raw *)
+                                          pst->pattern->spec,
+                                          (const struct rte_flow_item_raw *)
+                                          pst->pattern->mask, &info,
+                                          raw_spec_buf, raw_mask_buf);
+
+               lid = NPC_LID_LC;
+               lt = NPC_LT_LC_NGIO;
+               info.hw_mask = &hw_mask;
+               otx2_flow_get_hw_supp_mask(pst, &info, lid, lt);
+               break;
        default:
                /* No match at this layer */
                return 0;
@@ -552,10 +608,13 @@ int
 otx2_flow_parse_lb(struct otx2_parse_state *pst)
 {
        const struct rte_flow_item *pattern = pst->pattern;
+       uint8_t raw_spec_buf[NPC_MAX_RAW_ITEM_LEN];
+       uint8_t raw_mask_buf[NPC_MAX_RAW_ITEM_LEN];
        const struct rte_flow_item *last_pattern;
+       const struct rte_flow_item_raw *raw_spec;
        char hw_mask[NPC_MAX_EXTRACT_DATA_LEN];
        struct otx2_flow_item_info info;
-       int lid, lt, lflags;
+       int lid, lt, lflags, len;
        int nr_vlans = 0;
        int rc;
 
@@ -638,13 +697,44 @@ otx2_flow_parse_lb(struct otx2_parse_state *pst)
 
                info.def_mask = &rte_flow_item_e_tag_mask;
                info.len = sizeof(struct rte_flow_item_e_tag);
+       } else if (pst->pattern->type == RTE_FLOW_ITEM_TYPE_RAW) {
+               raw_spec = pst->pattern->spec;
+               if (raw_spec->relative)
+                       return 0;
+               len = raw_spec->length + raw_spec->offset;
+               if (len > NPC_MAX_RAW_ITEM_LEN) {
+                       rte_flow_error_set(pst->error, EINVAL,
+                                          RTE_FLOW_ERROR_TYPE_ITEM, NULL,
+                                          "Spec length too big");
+                       return -rte_errno;
+               }
+
+               if (pst->npc->switch_header_type ==
+                   OTX2_PRIV_FLAGS_VLAN_EXDSA) {
+                       lt = NPC_LT_LB_VLAN_EXDSA;
+               } else if (pst->npc->switch_header_type ==
+                          OTX2_PRIV_FLAGS_EXDSA) {
+                       lt = NPC_LT_LB_EXDSA;
+               } else {
+                       rte_flow_error_set(pst->error, ENOTSUP,
+                                          RTE_FLOW_ERROR_TYPE_ITEM, NULL,
+                                          "exdsa or vlan_exdsa not enabled on"
+                                          " port");
+                       return -rte_errno;
+               }
+
+               otx2_flow_raw_item_prepare((const struct rte_flow_item_raw *)
+                                          pst->pattern->spec,
+                                          (const struct rte_flow_item_raw *)
+                                          pst->pattern->mask, &info,
+                                          raw_spec_buf, raw_mask_buf);
+
+               info.hw_hdr_len = 0;
        } else {
                return 0;
        }
 
        info.hw_mask = &hw_mask;
-       info.spec = NULL;
-       info.mask = NULL;
        otx2_flow_get_hw_supp_mask(pst, &info, lid, lt);
 
        rc = otx2_flow_parse_item_basic(pst->pattern, &info, pst->error);
@@ -656,6 +746,7 @@ otx2_flow_parse_lb(struct otx2_parse_state *pst)
        return otx2_flow_update_parse_state(pst, &info, lid, lt, lflags);
 }
 
+
 int
 otx2_flow_parse_la(struct otx2_parse_state *pst)
 {
@@ -809,14 +900,17 @@ otx2_flow_parse_actions(struct rte_eth_dev *dev,
 {
        struct otx2_eth_dev *hw = dev->data->dev_private;
        struct otx2_npc_flow_info *npc = &hw->npc_flow;
+       const struct rte_flow_action_port_id *port_act;
        const struct rte_flow_action_count *act_count;
        const struct rte_flow_action_mark *act_mark;
        const struct rte_flow_action_queue *act_q;
        const struct rte_flow_action_vf *vf_act;
+       uint16_t pf_func, vf_id, port_id, pf_id;
+       char if_name[RTE_ETH_NAME_MAX_LEN];
        bool vlan_insert_action = false;
+       struct rte_eth_dev *eth_dev;
        const char *errmsg = NULL;
        int sel_act, req_act = 0;
-       uint16_t pf_func, vf_id;
        int errcode = 0;
        int mark = 0;
        int rq = 0;
@@ -892,6 +986,48 @@ otx2_flow_parse_actions(struct rte_eth_dev *dev,
                        }
                        break;
 
+               case RTE_FLOW_ACTION_TYPE_PORT_ID:
+                       port_act = (const struct rte_flow_action_port_id *)
+                               actions->conf;
+                       port_id = port_act->id;
+                       if (rte_eth_dev_get_name_by_port(port_id, if_name)) {
+                               errmsg = "Name not found for output port id";
+                               errcode = EINVAL;
+                               goto err_exit;
+                       }
+                       eth_dev = rte_eth_dev_allocated(if_name);
+                       if (!eth_dev) {
+                               errmsg = "eth_dev not found for output port id";
+                               errcode = EINVAL;
+                               goto err_exit;
+                       }
+                       if (!otx2_ethdev_is_same_driver(eth_dev)) {
+                               errmsg = "Output port id unsupported type";
+                               errcode = ENOTSUP;
+                               goto err_exit;
+                       }
+                       if (!otx2_dev_is_vf(otx2_eth_pmd_priv(eth_dev))) {
+                               errmsg = "Output port should be VF";
+                               errcode = ENOTSUP;
+                               goto err_exit;
+                       }
+                       vf_id = otx2_eth_pmd_priv(eth_dev)->vf;
+                       if (vf_id  >= hw->maxvf) {
+                               errmsg = "Invalid vf for output port";
+                               errcode = EINVAL;
+                               goto err_exit;
+                       }
+                       pf_id = otx2_eth_pmd_priv(eth_dev)->pf;
+                       if (pf_id != hw->pf) {
+                               errmsg = "Output port unsupported PF";
+                               errcode = ENOTSUP;
+                               goto err_exit;
+                       }
+                       pf_func &= (0xfc00);
+                       pf_func = (pf_func | (vf_id + 1));
+                       req_act |= OTX2_FLOW_ACT_VF;
+                       break;
+
                case RTE_FLOW_ACTION_TYPE_QUEUE:
                        /* Applicable only to ingress flow */
                        act_q = (const struct rte_flow_action_queue *)
@@ -1090,7 +1226,10 @@ otx2_flow_parse_actions(struct rte_eth_dev *dev,
 
 set_pf_func:
        /* Ideally AF must ensure that correct pf_func is set */
-       flow->npc_action |= (uint64_t)pf_func << 4;
+       if (attr->egress)
+               flow->npc_action |= (uint64_t)pf_func << 48;
+       else
+               flow->npc_action |= (uint64_t)pf_func << 4;
 
        return 0;