return 1;
}
+static void
+flow_set_hw_mask(struct otx2_flow_item_info *info,
+ struct npc_xtract_info *xinfo,
+ char *hw_mask)
+{
+ int max_off, offset;
+ int j;
+
+ if (xinfo->enable == 0)
+ return;
+
+ if (xinfo->hdr_off < info->hw_hdr_len)
+ return;
+
+ max_off = xinfo->hdr_off + xinfo->len - info->hw_hdr_len;
+
+ if (max_off > info->len)
+ max_off = info->len;
+
+ offset = xinfo->hdr_off - info->hw_hdr_len;
+ for (j = offset; j < max_off; j++)
+ hw_mask[j] = 0xff;
+}
+
void
otx2_flow_get_hw_supp_mask(struct otx2_parse_state *pst,
struct otx2_flow_item_info *info, int lid, int lt)
{
- struct npc_xtract_info *xinfo;
+ struct npc_xtract_info *xinfo, *lfinfo;
char *hw_mask = info->hw_mask;
- int max_off, offset;
+ int lf_cfg;
int i, j;
int intf;
memset(hw_mask, 0, info->len);
for (i = 0; i < NPC_MAX_LD; i++) {
- if (xinfo[i].hdr_off < info->hw_hdr_len)
- continue;
+ flow_set_hw_mask(info, &xinfo[i], hw_mask);
+ }
- max_off = xinfo[i].hdr_off + xinfo[i].len - info->hw_hdr_len;
+ for (i = 0; i < NPC_MAX_LD; i++) {
- if (xinfo[i].enable == 0)
+ if (xinfo[i].flags_enable == 0)
continue;
- if (max_off > info->len)
- max_off = info->len;
+ lf_cfg = pst->npc->prx_lfcfg[i].i;
+ if (lf_cfg == lid) {
+ for (j = 0; j < NPC_MAX_LFL; j++) {
+ lfinfo = pst->npc->prx_fxcfg[intf]
+ [i][j].xtract;
+ flow_set_hw_mask(info, &lfinfo[0], hw_mask);
+ }
+ }
+ }
+}
+
+static int
+flow_update_extraction_data(struct otx2_parse_state *pst,
+ struct otx2_flow_item_info *info,
+ struct npc_xtract_info *xinfo)
+{
+ uint8_t int_info_mask[NPC_MAX_EXTRACT_DATA_LEN];
+ uint8_t int_info[NPC_MAX_EXTRACT_DATA_LEN];
+ struct npc_xtract_info *x;
+ int k, idx, hdr_off;
+ int len = 0;
+
+ x = xinfo;
+ len = x->len;
+ hdr_off = x->hdr_off;
+
+ if (hdr_off < info->hw_hdr_len)
+ return 0;
+
+ if (x->enable == 0)
+ return 0;
+
+ otx2_npc_dbg("x->hdr_off = %d, len = %d, info->len = %d,"
+ "x->key_off = %d", x->hdr_off, len, info->len,
+ x->key_off);
+
+ hdr_off -= info->hw_hdr_len;
+
+ if (hdr_off + len > info->len)
+ len = info->len - hdr_off;
- offset = xinfo[i].hdr_off - info->hw_hdr_len;
- for (j = offset; j < max_off; j++)
- hw_mask[j] = 0xff;
+ /* Check for over-write of previous layer */
+ if (!flow_mem_is_zero(pst->mcam_mask + x->key_off,
+ len)) {
+ /* Cannot support this data match */
+ rte_flow_error_set(pst->error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ pst->pattern,
+ "Extraction unsupported");
+ return -rte_errno;
+ }
+
+ len = flow_check_copysz((OTX2_MAX_MCAM_WIDTH_DWORDS * 8)
+ - x->key_off,
+ len);
+ if (len < 0) {
+ rte_flow_error_set(pst->error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ pst->pattern,
+ "Internal Error");
+ return -rte_errno;
}
+
+ /* Need to reverse complete structure so that dest addr is at
+ * MSB so as to program the MCAM using mcam_data & mcam_mask
+ * arrays
+ */
+ flow_prep_mcam_ldata(int_info,
+ (const uint8_t *)info->spec + hdr_off,
+ x->len);
+ flow_prep_mcam_ldata(int_info_mask,
+ (const uint8_t *)info->mask + hdr_off,
+ x->len);
+
+ otx2_npc_dbg("Spec: ");
+ for (k = 0; k < info->len; k++)
+ otx2_npc_dbg("0x%.2x ",
+ ((const uint8_t *)info->spec)[k]);
+
+ otx2_npc_dbg("Int_info: ");
+ for (k = 0; k < info->len; k++)
+ otx2_npc_dbg("0x%.2x ", int_info[k]);
+
+ memcpy(pst->mcam_mask + x->key_off, int_info_mask, len);
+ memcpy(pst->mcam_data + x->key_off, int_info, len);
+
+ otx2_npc_dbg("Parse state mcam data & mask");
+ for (idx = 0; idx < len ; idx++)
+ otx2_npc_dbg("data[%d]: 0x%x, mask[%d]: 0x%x", idx,
+ *(pst->mcam_data + idx + x->key_off), idx,
+ *(pst->mcam_mask + idx + x->key_off));
+ return 0;
}
int
struct otx2_flow_item_info *info, int lid, int lt,
uint8_t flags)
{
- uint8_t int_info_mask[NPC_MAX_EXTRACT_DATA_LEN];
- uint8_t int_info[NPC_MAX_EXTRACT_DATA_LEN];
struct npc_lid_lt_xtract_info *xinfo;
- int len = 0;
- int intf;
- int i;
+ struct npc_xtract_info *lfinfo;
+ int intf, lf_cfg;
+ int i, j, rc = 0;
otx2_npc_dbg("Parse state function info mask total %s",
(const uint8_t *)info->mask);
if (xinfo->is_terminating)
pst->terminate = 1;
- /* Need to check if flags are supported but in latest
- * KPU profile, flags are used as enumeration! No way,
- * it can be validated unless MBOX is changed to return
- * set of valid values out of 2**8 possible values.
- */
- if (info->spec == NULL) { /* Nothing to match */
+ if (info->spec == NULL) {
otx2_npc_dbg("Info spec NULL");
goto done;
}
- /* Copy spec and mask into mcam match string, mask.
- * Since both RTE FLOW and OTX2 MCAM use network-endianness
- * for data, we are saved from nasty conversions.
- */
for (i = 0; i < NPC_MAX_LD; i++) {
- struct npc_xtract_info *x;
- int k, idx, hdr_off;
-
- x = &xinfo->xtract[i];
- len = x->len;
- hdr_off = x->hdr_off;
-
- if (hdr_off < info->hw_hdr_len)
- continue;
+ rc = flow_update_extraction_data(pst, info, &xinfo->xtract[i]);
+ if (rc != 0)
+ return rc;
+ }
- if (x->enable == 0)
+ for (i = 0; i < NPC_MAX_LD; i++) {
+ if (xinfo->xtract[i].flags_enable == 0)
continue;
- otx2_npc_dbg("x->hdr_off = %d, len = %d, info->len = %d,"
- "x->key_off = %d", x->hdr_off, len, info->len,
- x->key_off);
-
- hdr_off -= info->hw_hdr_len;
-
- if (hdr_off + len > info->len)
- len = info->len - hdr_off;
-
- /* Check for over-write of previous layer */
- if (!flow_mem_is_zero(pst->mcam_mask + x->key_off,
- len)) {
- /* Cannot support this data match */
- rte_flow_error_set(pst->error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- pst->pattern,
- "Extraction unsupported");
- return -rte_errno;
- }
-
- len = flow_check_copysz((OTX2_MAX_MCAM_WIDTH_DWORDS * 8)
- - x->key_off,
- len);
- if (len < 0) {
- rte_flow_error_set(pst->error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- pst->pattern,
- "Internal Error");
- return -rte_errno;
+ lf_cfg = pst->npc->prx_lfcfg[i].i;
+ if (lf_cfg == lid) {
+ for (j = 0; j < NPC_MAX_LFL; j++) {
+ lfinfo = pst->npc->prx_fxcfg[intf]
+ [i][j].xtract;
+ rc = flow_update_extraction_data(pst, info,
+ &lfinfo[0]);
+ if (rc != 0)
+ return rc;
+
+ if (lfinfo[0].enable)
+ pst->flags[lid] = j;
+ }
}
-
- /* Need to reverse complete structure so that dest addr is at
- * MSB so as to program the MCAM using mcam_data & mcam_mask
- * arrays
- */
- flow_prep_mcam_ldata(int_info,
- (const uint8_t *)info->spec + hdr_off,
- x->len);
- flow_prep_mcam_ldata(int_info_mask,
- (const uint8_t *)info->mask + hdr_off,
- x->len);
-
- otx2_npc_dbg("Spec: ");
- for (k = 0; k < info->len; k++)
- otx2_npc_dbg("0x%.2x ",
- ((const uint8_t *)info->spec)[k]);
-
- otx2_npc_dbg("Int_info: ");
- for (k = 0; k < info->len; k++)
- otx2_npc_dbg("0x%.2x ", int_info[k]);
-
- memcpy(pst->mcam_mask + x->key_off, int_info_mask, len);
- memcpy(pst->mcam_data + x->key_off, int_info, len);
-
- otx2_npc_dbg("Parse state mcam data & mask");
- for (idx = 0; idx < len ; idx++)
- otx2_npc_dbg("data[%d]: 0x%x, mask[%d]: 0x%x", idx,
- *(pst->mcam_data + idx + x->key_off), idx,
- *(pst->mcam_mask + idx + x->key_off));
}
done:
git.droids-corp.org / dpdk.git / blobdiff