-/*
- * Copyright (c) 2016 QLogic Corporation.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (c) 2016 - 2018 Cavium Inc.
* All rights reserved.
- * www.qlogic.com
- *
- * See LICENSE.qede_pmd for copyright and licensing details.
+ * www.cavium.com
*/
#include "bcm_osal.h"
/* feature flags */
if (IS_ECORE_SRIOV(p_hwfn->p_dev))
flags |= PQ_FLAGS_VFS;
+ if (IS_ECORE_PACING(p_hwfn))
+ flags |= PQ_FLAGS_RLS;
/* protocol flags */
switch (p_hwfn->hw_info.personality) {
case ECORE_PCI_ETH:
- flags |= PQ_FLAGS_MCOS;
+ if (!IS_ECORE_PACING(p_hwfn))
+ flags |= PQ_FLAGS_MCOS;
break;
case ECORE_PCI_FCOE:
flags |= PQ_FLAGS_OFLD;
flags |= PQ_FLAGS_ACK | PQ_FLAGS_OOO | PQ_FLAGS_OFLD;
break;
case ECORE_PCI_ETH_ROCE:
- flags |= PQ_FLAGS_MCOS | PQ_FLAGS_OFLD;
+ flags |= PQ_FLAGS_OFLD | PQ_FLAGS_LLT;
+ if (!IS_ECORE_PACING(p_hwfn))
+ flags |= PQ_FLAGS_MCOS;
break;
case ECORE_PCI_ETH_IWARP:
- flags |= PQ_FLAGS_MCOS | PQ_FLAGS_ACK | PQ_FLAGS_OOO |
- PQ_FLAGS_OFLD;
+ flags |= PQ_FLAGS_ACK | PQ_FLAGS_OOO | PQ_FLAGS_OFLD;
+ if (!IS_ECORE_PACING(p_hwfn))
+ flags |= PQ_FLAGS_MCOS;
break;
default:
DP_ERR(p_hwfn, "unknown personality %d\n",
return ecore_get_cm_pq_idx(p_hwfn, PQ_FLAGS_VFS) + vf;
}
-u16 ecore_get_cm_pq_idx_rl(struct ecore_hwfn *p_hwfn, u8 rl)
+u16 ecore_get_cm_pq_idx_rl(struct ecore_hwfn *p_hwfn, u16 rl)
{
u16 max_rl = ecore_init_qm_get_num_pf_rls(p_hwfn);
return ecore_get_cm_pq_idx(p_hwfn, PQ_FLAGS_RLS) + rl;
}
+u16 ecore_get_qm_vport_idx_rl(struct ecore_hwfn *p_hwfn, u16 rl)
+{
+ u16 start_pq, pq, qm_pq_idx;
+
+ pq = ecore_get_cm_pq_idx_rl(p_hwfn, rl);
+ start_pq = p_hwfn->qm_info.start_pq;
+ qm_pq_idx = pq - start_pq - CM_TX_PQ_BASE;
+
+ if (qm_pq_idx > p_hwfn->qm_info.num_pqs) {
+ DP_ERR(p_hwfn,
+ "qm_pq_idx %d must be smaller than %d\n",
+ qm_pq_idx, p_hwfn->qm_info.num_pqs);
+ }
+
+ return p_hwfn->qm_info.qm_pq_params[qm_pq_idx].vport_id;
+}
+
/* Functions for creating specific types of pqs */
static void ecore_init_qm_lb_pq(struct ecore_hwfn *p_hwfn)
{
}
}
- /* Log and clean previous pglue_b errors if such exist */
- ecore_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_main_ptt);
- ecore_pglueb_clear_err(p_hwfn, p_hwfn->p_main_ptt);
+ /* Log and clear previous pglue_b errors if such exist */
+ ecore_pglueb_rbc_attn_handler(p_hwfn, p_hwfn->p_main_ptt, true);
/* Enable the PF's internal FID_enable in the PXP */
rc = ecore_pglueb_set_pfid_enable(p_hwfn, p_hwfn->p_main_ptt,
if (rc != ECORE_SUCCESS)
goto load_err;
+ /* Clear the pglue_b was_error indication.
+ * In E4 it must be done after the BME and the internal
+ * FID_enable for the PF are set, since VDMs may cause the
+ * indication to be set again.
+ */
+ ecore_pglueb_clear_err(p_hwfn, p_hwfn->p_main_ptt);
+
switch (load_code) {
case FW_MSG_CODE_DRV_LOAD_ENGINE:
rc = ecore_hw_init_common(p_hwfn, p_hwfn->p_main_ptt,
if (rc != ECORE_SUCCESS)
DP_INFO(p_hwfn, "Failed to update firmware version\n");
- if (!b_default_mtu)
+ if (!b_default_mtu) {
rc = ecore_mcp_ov_update_mtu(p_hwfn, p_hwfn->p_main_ptt,
p_hwfn->hw_info.mtu);
- if (rc != ECORE_SUCCESS)
- DP_INFO(p_hwfn, "Failed to update default mtu\n");
+ if (rc != ECORE_SUCCESS)
+ DP_INFO(p_hwfn, "Failed to update default mtu\n");
+ }
rc = ecore_mcp_ov_update_driver_state(p_hwfn,
p_hwfn->p_main_ptt,
ECORE_OV_DRIVER_STATE_DISABLED);
if (rc != ECORE_SUCCESS)
DP_INFO(p_hwfn, "Failed to update driver state\n");
+
+ rc = ecore_mcp_ov_update_eswitch(p_hwfn, p_hwfn->p_main_ptt,
+ ECORE_OV_ESWITCH_NONE);
+ if (rc != ECORE_SUCCESS)
+ DP_INFO(p_hwfn, "Failed to update eswitch mode\n");
}
return rc;
break;
case NVM_CFG1_GLOB_MF_MODE_UFP:
p_hwfn->p_dev->mf_bits = 1 << ECORE_MF_OVLAN_CLSS |
- 1 << ECORE_MF_UFP_SPECIFIC;
+ 1 << ECORE_MF_UFP_SPECIFIC |
+ 1 << ECORE_MF_8021Q_TAGGING;
+ break;
+ case NVM_CFG1_GLOB_MF_MODE_BD:
+ p_hwfn->p_dev->mf_bits = 1 << ECORE_MF_OVLAN_CLSS |
+ 1 << ECORE_MF_LLH_PROTO_CLSS |
+ 1 << ECORE_MF_8021AD_TAGGING;
break;
-
case NVM_CFG1_GLOB_MF_MODE_NPAR1_0:
p_hwfn->p_dev->mf_bits = 1 << ECORE_MF_LLH_MAC_CLSS |
1 << ECORE_MF_LLH_PROTO_CLSS |
*/
switch (mf_mode) {
case NVM_CFG1_GLOB_MF_MODE_MF_ALLOWED:
+ case NVM_CFG1_GLOB_MF_MODE_BD:
p_hwfn->p_dev->mf_mode = ECORE_MF_OVLAN;
break;
case NVM_CFG1_GLOB_MF_MODE_NPAR1_0:
bool drv_resc_alloc = p_params->drv_resc_alloc;
enum _ecore_status_t rc;
+ if (IS_ECORE_PACING(p_hwfn)) {
+ DP_VERBOSE(p_hwfn->p_dev, ECORE_MSG_IOV,
+ "Skipping IOV as packet pacing is requested\n");
+ }
+
/* Since all information is common, only first hwfns should do this */
- if (IS_LEAD_HWFN(p_hwfn)) {
+ if (IS_LEAD_HWFN(p_hwfn) && !IS_ECORE_PACING(p_hwfn)) {
rc = ecore_iov_hw_info(p_hwfn);
if (rc != ECORE_SUCCESS) {
if (p_params->b_relaxed_probe)
* that can result in performance penalty in some cases. 4
* represents a good tradeoff between performance and flexibility.
*/
- p_hwfn->hw_info.num_hw_tc = NUM_PHYS_TCS_4PORT_K2;
+ if (IS_ECORE_PACING(p_hwfn))
+ p_hwfn->hw_info.num_hw_tc = 1;
+ else
+ p_hwfn->hw_info.num_hw_tc = NUM_PHYS_TCS_4PORT_K2;
/* start out with a single active tc. This can be increased either
* by dcbx negotiation or by upper layer driver
p_dev->chk_reg_fifo = p_params->chk_reg_fifo;
p_dev->allow_mdump = p_params->allow_mdump;
+ p_hwfn->b_en_pacing = p_params->b_en_pacing;
if (p_params->b_relaxed_probe)
p_params->p_relaxed_res = ECORE_HW_PREPARE_SUCCESS;
BAR_ID_1) / 2;
p_doorbell = (void OSAL_IOMEM *)addr;
+ p_dev->hwfns[1].b_en_pacing = p_params->b_en_pacing;
/* prepare second hw function */
rc = ecore_hw_prepare_single(&p_dev->hwfns[1], p_regview,
p_doorbell, p_params);