#include "ecore_chain.h"
#include "ecore_int_api.h"
-struct ecore_tunn_start_params;
-
/**
* @brief ecore_init_dp - initialize the debug level
*
*/
void ecore_resc_setup(struct ecore_dev *p_dev);
+struct ecore_hw_init_params {
+ /* tunnelling parameters */
+ struct ecore_tunn_start_params *p_tunn;
+ bool b_hw_start;
+ /* interrupt mode [msix, inta, etc.] to use */
+ enum ecore_int_mode int_mode;
+/* npar tx switching to be used for vports configured for tx-switching */
+
+ bool allow_npar_tx_switch;
+ /* binary fw data pointer in binary fw file */
+ const u8 *bin_fw_data;
+};
+
/**
* @brief ecore_hw_init -
*
* @param p_dev
- * @param p_tunn - tunneling parameters
- * @param b_hw_start
- * @param int_mode - interrupt mode [msix, inta, etc.] to use.
- * @param allow_npar_tx_switch - npar tx switching to be used
- * for vports configured for tx-switching.
- * @param bin_fw_data - binary fw data pointer in binary fw file.
- * Pass NULL if not using binary fw file.
+ * @param p_params
*
* @return enum _ecore_status_t
*/
enum _ecore_status_t ecore_hw_init(struct ecore_dev *p_dev,
- struct ecore_tunn_start_params *p_tunn,
- bool b_hw_start,
- enum ecore_int_mode int_mode,
- bool allow_npar_tx_switch,
- const u8 *bin_fw_data);
+ struct ecore_hw_init_params *p_params);
/**
* @brief ecore_hw_timers_stop_all -
/**
* @brief ecore_hw_stop_fastpath -should be called incase
- * slowpath is still required for the device, but
- * fastpath is not.
+ * slowpath is still required for the device,
+ * but fastpath is not.
*
* @param p_dev
*
*/
void ecore_hw_stop_fastpath(struct ecore_dev *p_dev);
+#ifndef LINUX_REMOVE
/**
* @brief ecore_prepare_hibernate -should be called when
* the system is going into the hibernate state
*
*/
void ecore_prepare_hibernate(struct ecore_dev *p_dev);
+#endif
/**
* @brief ecore_hw_start_fastpath -restart fastpath traffic,
*/
enum _ecore_status_t ecore_hw_reset(struct ecore_dev *p_dev);
+struct ecore_hw_prepare_params {
+ /* personality to initialize */
+ int personality;
+ /* force the driver's default resource allocation */
+ bool drv_resc_alloc;
+ /* check the reg_fifo after any register access */
+ bool chk_reg_fifo;
+ /* request the MFW to initiate PF FLR */
+ bool initiate_pf_flr;
+ /* the OS Epoch time in seconds */
+ u32 epoch;
+};
+
/**
* @brief ecore_hw_prepare -
*
* @param p_dev
- * @param personality - personality to initialize
+ * @param p_params
*
* @return enum _ecore_status_t
*/
-enum _ecore_status_t ecore_hw_prepare(struct ecore_dev *p_dev, int personality);
+enum _ecore_status_t ecore_hw_prepare(struct ecore_dev *p_dev,
+ struct ecore_hw_prepare_params *p_params);
/**
* @brief ecore_hw_remove -
enum ecore_chain_cnt_type cnt_type,
u32 num_elems,
osal_size_t elem_size,
- struct ecore_chain *p_chain);
+ struct ecore_chain *p_chain,
+ struct ecore_chain_ext_pbl *ext_pbl);
/**
* @brief ecore_chain_free - Free chain DMA memory
* @param p_filter - MAC to remove
*/
void ecore_llh_remove_mac_filter(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u8 *p_filter);
+ struct ecore_ptt *p_ptt,
+ u8 *p_filter);
+
+enum ecore_llh_port_filter_type_t {
+ ECORE_LLH_FILTER_ETHERTYPE,
+ ECORE_LLH_FILTER_TCP_SRC_PORT,
+ ECORE_LLH_FILTER_TCP_DEST_PORT,
+ ECORE_LLH_FILTER_TCP_SRC_AND_DEST_PORT,
+ ECORE_LLH_FILTER_UDP_SRC_PORT,
+ ECORE_LLH_FILTER_UDP_DEST_PORT,
+ ECORE_LLH_FILTER_UDP_SRC_AND_DEST_PORT
+};
/**
- * @brief ecore_llh_add_ethertype_filter - configures a ethertype filter in llh
+ * @brief ecore_llh_add_protocol_filter - configures a protocol filter in llh
*
* @param p_hwfn
* @param p_ptt
- * @param filter - ethertype to add
+ * @param source_port_or_eth_type - source port or ethertype to add
+ * @param dest_port - destination port to add
+ * @param type - type of filters and comparing
*/
-enum _ecore_status_t ecore_llh_add_ethertype_filter(struct ecore_hwfn *p_hwfn,
+enum _ecore_status_t
+ecore_llh_add_protocol_filter(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
- u16 filter);
+ u16 source_port_or_eth_type,
+ u16 dest_port,
+ enum ecore_llh_port_filter_type_t type);
/**
- * @brief ecore_llh_remove_ethertype_filter - removes a ethertype llh filter
+ * @brief ecore_llh_remove_protocol_filter - remove a protocol filter in llh
*
* @param p_hwfn
* @param p_ptt
- * @param filter - ethertype to remove
+ * @param source_port_or_eth_type - source port or ethertype to add
+ * @param dest_port - destination port to add
+ * @param type - type of filters and comparing
*/
-void ecore_llh_remove_ethertype_filter(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u16 filter);
+void
+ecore_llh_remove_protocol_filter(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u16 source_port_or_eth_type,
+ u16 dest_port,
+ enum ecore_llh_port_filter_type_t type);
/**
* @brief ecore_llh_clear_all_filters - removes all MAC filters from llh
struct ecore_ptt *p_ptt);
/**
-*@brief Cleanup of previous driver remains prior to load
+ * @brief ecore_llh_set_function_as_default - set function as default per port
*
* @param p_hwfn
* @param p_ptt
- * @param id - For PF, engine-relative. For VF, PF-relative.
- * @param is_vf - true iff cleanup is made for a VF.
- *
- * @return enum _ecore_status_t
*/
-enum _ecore_status_t ecore_final_cleanup(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt,
- u16 id, bool is_vf);
+enum _ecore_status_t
+ecore_llh_set_function_as_default(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt);
/**
- * @brief ecore_test_registers - Perform register tests
+ *@brief Cleanup of previous driver remains prior to load
*
* @param p_hwfn
* @param p_ptt
+ * @param id - For PF, engine-relative. For VF, PF-relative.
+ * @param is_vf - true iff cleanup is made for a VF.
*
* @return enum _ecore_status_t
*/
-enum _ecore_status_t ecore_test_registers(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt);
+enum _ecore_status_t ecore_final_cleanup(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u16 id,
+ bool is_vf);
/**
* @brief ecore_set_rxq_coalesce - Configure coalesce parameters for an Rx queue
+ * The fact that we can configure coalescing to up to 511, but on varying
+ * accuracy [the bigger the value the less accurate] up to a mistake of 3usec
+ * for the highest values.
*
* @param p_hwfn
* @param p_ptt
* @param coalesce - Coalesce value in micro seconds.
* @param qid - Queue index.
+ * @param qid - SB Id
*
* @return enum _ecore_status_t
*/
enum _ecore_status_t ecore_set_rxq_coalesce(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
- u8 coalesce, u8 qid);
+ u16 coalesce, u8 qid, u16 sb_id);
/**
* @brief ecore_set_txq_coalesce - Configure coalesce parameters for a Tx queue
+ * While the API allows setting coalescing per-qid, all tx queues sharing a
+ * SB should be in same range [i.e., either 0-0x7f, 0x80-0xff or 0x100-0x1ff]
+ * otherwise configuration would break.
*
* @param p_hwfn
* @param p_ptt
* @param coalesce - Coalesce value in micro seconds.
* @param qid - Queue index.
+ * @param qid - SB Id
*
* @return enum _ecore_status_t
*/
enum _ecore_status_t ecore_set_txq_coalesce(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
- u8 coalesce, u8 qid);
+ u16 coalesce, u8 qid, u16 sb_id);
#endif