*
* @param p_dev
*/
-void ecore_init_struct(struct ecore_dev *p_dev);
+enum _ecore_status_t ecore_init_struct(struct ecore_dev *p_dev);
/**
* @brief ecore_resc_free -
*/
void ecore_resc_setup(struct ecore_dev *p_dev);
+enum ecore_mfw_timeout_fallback {
+ ECORE_TO_FALLBACK_TO_NONE,
+ ECORE_TO_FALLBACK_TO_DEFAULT,
+ ECORE_TO_FALLBACK_FAIL_LOAD,
+};
+
enum ecore_override_force_load {
ECORE_OVERRIDE_FORCE_LOAD_NONE,
ECORE_OVERRIDE_FORCE_LOAD_ALWAYS,
#define ECORE_LOAD_REQ_LOCK_TO_DEFAULT 0
#define ECORE_LOAD_REQ_LOCK_TO_NONE 255
+ /* Action to take in case the MFW doesn't support timeout values other
+ * than default and none.
+ */
+ enum ecore_mfw_timeout_fallback mfw_timeout_fallback;
+
/* Avoid engine reset when first PF loads on it */
bool avoid_eng_reset;
/* Driver load parameters */
struct ecore_drv_load_params *p_drv_load_params;
+
+ /* SPQ block timeout in msec */
+ u32 spq_timeout_ms;
};
/**
*
* @param p_dev
*
+ * @return enum _ecore_status_t
*/
-void ecore_hw_stop_fastpath(struct ecore_dev *p_dev);
+enum _ecore_status_t ecore_hw_stop_fastpath(struct ecore_dev *p_dev);
#ifndef LINUX_REMOVE
/**
*
*/
void ecore_prepare_hibernate(struct ecore_dev *p_dev);
+
+enum ecore_db_rec_width {
+ DB_REC_WIDTH_32B,
+ DB_REC_WIDTH_64B,
+};
+
+enum ecore_db_rec_space {
+ DB_REC_KERNEL,
+ DB_REC_USER,
+};
+
+/**
+ * @brief db_recovery_add - add doorbell information to the doorbell
+ * recovery mechanism.
+ *
+ * @param p_dev
+ * @param db_addr - doorbell address
+ * @param db_data - address of where db_data is stored
+ * @param db_width - doorbell is 32b pr 64b
+ * @param db_space - doorbell recovery addresses are user or kernel space
+ */
+enum _ecore_status_t ecore_db_recovery_add(struct ecore_dev *p_dev,
+ void OSAL_IOMEM *db_addr,
+ void *db_data,
+ enum ecore_db_rec_width db_width,
+ enum ecore_db_rec_space db_space);
+
+/**
+ * @brief db_recovery_del - remove doorbell information from the doorbell
+ * recovery mechanism. db_data serves as key (db_addr is not unique).
+ *
+ * @param cdev
+ * @param db_addr - doorbell address
+ * @param db_data - address where db_data is stored. Serves as key for the
+ * entry to delete.
+ */
+enum _ecore_status_t ecore_db_recovery_del(struct ecore_dev *p_dev,
+ void OSAL_IOMEM *db_addr,
+ void *db_data);
+
+static OSAL_INLINE bool ecore_is_mf_ufp(struct ecore_hwfn *p_hwfn)
+{
+ return !!OSAL_TEST_BIT(ECORE_MF_UFP_SPECIFIC, &p_hwfn->p_dev->mf_bits);
+}
+
#endif
/**
* @brief ecore_hw_start_fastpath -restart fastpath traffic,
* only if hw_stop_fastpath was called
- * @param p_dev
+ * @param p_hwfn
*
+ * @return enum _ecore_status_t
*/
-void ecore_hw_start_fastpath(struct ecore_hwfn *p_hwfn);
+enum _ecore_status_t ecore_hw_start_fastpath(struct ecore_hwfn *p_hwfn);
enum ecore_hw_prepare_result {
ECORE_HW_PREPARE_SUCCESS,
void ecore_ptt_release(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt);
-#ifndef __EXTRACT__LINUX__
struct ecore_eth_stats_common {
u64 no_buff_discards;
u64 packet_too_big_discard;
u64 tx_mac_mc_packets;
u64 tx_mac_bc_packets;
u64 tx_mac_ctrl_frames;
+ u64 link_change_count;
};
struct ecore_eth_stats_bb {
struct ecore_eth_stats_ah ah;
};
};
-#endif
enum ecore_dmae_address_type_t {
ECORE_DMAE_ADDRESS_HOST_VIRT,
struct ecore_ptt *p_ptt,
u16 id,
bool is_vf);
+
+/**
+ * @brief ecore_get_queue_coalesce - Retrieve coalesce value for a given queue.
+ *
+ * @param p_hwfn
+ * @param p_coal - store coalesce value read from the hardware.
+ * @param p_handle
+ *
+ * @return enum _ecore_status_t
+ **/
+enum _ecore_status_t
+ecore_get_queue_coalesce(struct ecore_hwfn *p_hwfn, u16 *coal,
+ void *handle);
+
/**
* @brief ecore_set_queue_coalesce - Configure coalesce parameters for Rx and
* Tx queue. The fact that we can configure coalescing to up to 511, but on