CORE_EVENT_TX_QUEUE_STOP,
CORE_EVENT_RX_QUEUE_START,
CORE_EVENT_RX_QUEUE_STOP,
+ CORE_EVENT_RX_QUEUE_FLUSH,
MAX_CORE_EVENT_OPCODE
};
CORE_RAMROD_TX_QUEUE_START /* TX Queue Start Ramrod */,
CORE_RAMROD_RX_QUEUE_STOP /* RX Queue Stop Ramrod */,
CORE_RAMROD_TX_QUEUE_STOP /* TX Queue Stop Ramrod */,
+ CORE_RAMROD_RX_QUEUE_FLUSH /* RX Flush queue Ramrod */,
MAX_CORE_RAMROD_CMD_ID
};
u8 type /* CQE type */;
u8 ramrod_cmd_id;
__le16 echo;
- __le32 reserved1[7];
+ struct core_rx_cqe_opaque_data opaque_data /* Opaque Data */;
+ __le32 reserved1[5];
};
/*
/*
* Flags for Core TX BD
*/
-struct core_tx_bd_flags {
- u8 as_bitfield;
+struct core_tx_bd_data {
+ __le16 as_bitfield;
/* Do not allow additional VLAN manipulations on this packet (DCB) */
-#define CORE_TX_BD_FLAGS_FORCE_VLAN_MODE_MASK 0x1
-#define CORE_TX_BD_FLAGS_FORCE_VLAN_MODE_SHIFT 0
+#define CORE_TX_BD_DATA_FORCE_VLAN_MODE_MASK 0x1
+#define CORE_TX_BD_DATA_FORCE_VLAN_MODE_SHIFT 0
/* Insert VLAN into packet */
-#define CORE_TX_BD_FLAGS_VLAN_INSERTION_MASK 0x1
-#define CORE_TX_BD_FLAGS_VLAN_INSERTION_SHIFT 1
+#define CORE_TX_BD_DATA_VLAN_INSERTION_MASK 0x1
+#define CORE_TX_BD_DATA_VLAN_INSERTION_SHIFT 1
/* This is the first BD of the packet (for debug) */
-#define CORE_TX_BD_FLAGS_START_BD_MASK 0x1
-#define CORE_TX_BD_FLAGS_START_BD_SHIFT 2
+#define CORE_TX_BD_DATA_START_BD_MASK 0x1
+#define CORE_TX_BD_DATA_START_BD_SHIFT 2
/* Calculate the IP checksum for the packet */
-#define CORE_TX_BD_FLAGS_IP_CSUM_MASK 0x1
-#define CORE_TX_BD_FLAGS_IP_CSUM_SHIFT 3
+#define CORE_TX_BD_DATA_IP_CSUM_MASK 0x1
+#define CORE_TX_BD_DATA_IP_CSUM_SHIFT 3
/* Calculate the L4 checksum for the packet */
-#define CORE_TX_BD_FLAGS_L4_CSUM_MASK 0x1
-#define CORE_TX_BD_FLAGS_L4_CSUM_SHIFT 4
+#define CORE_TX_BD_DATA_L4_CSUM_MASK 0x1
+#define CORE_TX_BD_DATA_L4_CSUM_SHIFT 4
/* Packet is IPv6 with extensions */
-#define CORE_TX_BD_FLAGS_IPV6_EXT_MASK 0x1
-#define CORE_TX_BD_FLAGS_IPV6_EXT_SHIFT 5
+#define CORE_TX_BD_DATA_IPV6_EXT_MASK 0x1
+#define CORE_TX_BD_DATA_IPV6_EXT_SHIFT 5
/* If IPv6+ext, and if l4_csum is 1, than this field indicates L4 protocol:
* 0-TCP, 1-UDP
*/
-#define CORE_TX_BD_FLAGS_L4_PROTOCOL_MASK 0x1
-#define CORE_TX_BD_FLAGS_L4_PROTOCOL_SHIFT 6
+#define CORE_TX_BD_DATA_L4_PROTOCOL_MASK 0x1
+#define CORE_TX_BD_DATA_L4_PROTOCOL_SHIFT 6
/* The pseudo checksum mode to place in the L4 checksum field. Required only
- * when IPv6+ext and l4_csum is set. (use enum core_l4_pseudo_checksum_mode)
+ * when IPv6+ext and l4_csum is set. (use enum core_l4_pseudo_checksum_mode)
+ */
+#define CORE_TX_BD_DATA_L4_PSEUDO_CSUM_MODE_MASK 0x1
+#define CORE_TX_BD_DATA_L4_PSEUDO_CSUM_MODE_SHIFT 7
+/* Number of BDs that make up one packet - width wide enough to present
+ * CORE_LL2_TX_MAX_BDS_PER_PACKET
*/
-#define CORE_TX_BD_FLAGS_L4_PSEUDO_CSUM_MODE_MASK 0x1
-#define CORE_TX_BD_FLAGS_L4_PSEUDO_CSUM_MODE_SHIFT 7
+#define CORE_TX_BD_DATA_NBDS_MASK 0xF
+#define CORE_TX_BD_DATA_NBDS_SHIFT 8
+/* Use roce_flavor enum - Differentiate between Roce flavors is valid when
+ * connType is ROCE (use enum core_roce_flavor_type)
+ */
+#define CORE_TX_BD_DATA_ROCE_FLAV_MASK 0x1
+#define CORE_TX_BD_DATA_ROCE_FLAV_SHIFT 12
+/* Calculate ip length */
+#define CORE_TX_BD_DATA_IP_LEN_MASK 0x1
+#define CORE_TX_BD_DATA_IP_LEN_SHIFT 13
+#define CORE_TX_BD_DATA_RESERVED0_MASK 0x3
+#define CORE_TX_BD_DATA_RESERVED0_SHIFT 14
};
/*
* packets: echo data to pass to Rx
*/
__le16 nw_vlan_or_lb_echo;
- u8 bitfield0;
-/* Number of BDs that make up one packet - width wide enough to present
- * X_CORE_LL2_NUM_OF_BDS_ON_ST_CT
- */
-#define CORE_TX_BD_NBDS_MASK 0xF
-#define CORE_TX_BD_NBDS_SHIFT 0
-/* Use roce_flavor enum - Diffrentiate between Roce flavors is valid when
- * connType is ROCE (use enum core_roce_flavor_type)
- */
-#define CORE_TX_BD_ROCE_FLAV_MASK 0x1
-#define CORE_TX_BD_ROCE_FLAV_SHIFT 4
-#define CORE_TX_BD_RESERVED0_MASK 0x7
-#define CORE_TX_BD_RESERVED0_SHIFT 5
- struct core_tx_bd_flags bd_flags /* BD Flags */;
+ struct core_tx_bd_data bd_data /* BD Flags */;
__le16 bitfield1;
+/* L4 Header Offset from start of packet (in Words). This is needed if both
+ * l4_csum and ipv6_ext are set
+ */
#define CORE_TX_BD_L4_HDR_OFFSET_W_MASK 0x3FFF
#define CORE_TX_BD_L4_HDR_OFFSET_W_SHIFT 0
/* Packet destination - Network, LB (use enum core_tx_dest) */
#define CORE_TX_BD_TX_DST_MASK 0x1
#define CORE_TX_BD_TX_DST_SHIFT 14
-#define CORE_TX_BD_RESERVED1_MASK 0x1
-#define CORE_TX_BD_RESERVED1_SHIFT 15
+#define CORE_TX_BD_RESERVED_MASK 0x1
+#define CORE_TX_BD_RESERVED_SHIFT 15
};
/* Tunneled packet with IPv6+Ext without a proper number of BDs */
ETH_TUNN_IPV6_EXT_NBD_ERR,
ETH_CONTROL_PACKET_VIOLATION /* VF sent control frame such as PFC */,
+ ETH_ANTI_SPOOFING_ERR /* Anti-Spoofing verification failure */,
MAX_MALICIOUS_VF_ERROR_ID
};
* tunnel configuration
*/
struct pf_start_tunnel_config {
-/* Set VXLAN tunnel UDP destination port. */
+/* Set VXLAN tunnel UDP destination port to vxlan_udp_port. If not set -
+ * FW will use a default port
+ */
u8 set_vxlan_udp_port_flg;
-/* Set GENEVE tunnel UDP destination port. */
+/* Set GENEVE tunnel UDP destination port to geneve_udp_port. If not set -
+ * FW will use a default port
+ */
u8 set_geneve_udp_port_flg;
u8 tx_enable_vxlan /* If set, enable VXLAN tunnel in TX path. */;
/* If set, enable l2 GENEVE tunnel in TX path. */
u8 tunnel_clss_ipgeneve;
u8 tunnel_clss_l2gre /* Classification scheme for l2 GRE tunnel. */;
u8 tunnel_clss_ipgre /* Classification scheme for ip GRE tunnel. */;
- __le16 vxlan_udp_port /* VXLAN tunnel UDP destination port. */;
- __le16 geneve_udp_port /* GENEVE tunnel UDP destination port. */;
+/* VXLAN tunnel UDP destination port. Valid if set_vxlan_udp_port_flg=1 */
+ __le16 vxlan_udp_port;
+/* GENEVE tunnel UDP destination port. Valid if set_geneve_udp_port_flg=1 */
+ __le16 geneve_udp_port;
};
/*
git.droids-corp.org / dpdk.git / blobdiff