-/*
- * Copyright (c) 2016 QLogic Corporation.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (c) 2016 - 2018 Cavium Inc.
* All rights reserved.
- * www.qlogic.com
- *
- * See LICENSE.qede_pmd for copyright and licensing details.
+ * www.cavium.com
*/
#ifndef _INIT_FW_FUNCS_H
#define _INIT_FW_FUNCS_H
-/* Forward declarations */
+#include "ecore_hsi_common.h"
+#include "ecore_hsi_eth.h"
+
+/* Physical memory descriptor */
+struct phys_mem_desc {
+ dma_addr_t phys_addr;
+ void *virt_addr;
+ u32 size; /* In bytes */
+};
+
+/* Returns the VOQ based on port and TC */
+#define VOQ(port, tc, max_phys_tcs_per_port) \
+ ((tc) == PURE_LB_TC ? NUM_OF_PHYS_TCS * MAX_NUM_PORTS_BB + (port) : \
+ (port) * (max_phys_tcs_per_port) + (tc))
struct init_qm_pq_params;
* Returns the required host memory size in 4KB units.
* Must be called before all QM init HSI functions.
*
- * @param pf_id - physical function ID
+ * @param p_hwfn - HW device data
* @param num_pf_cids - number of connections used by this PF
* @param num_vf_cids - number of connections used by VFs of this PF
* @param num_tids - number of tasks used by this PF
*
* @return The required host memory size in 4KB units.
*/
-u32 ecore_qm_pf_mem_size(u8 pf_id,
- u32 num_pf_cids,
+u32 ecore_qm_pf_mem_size(struct ecore_hwfn *p_hwfn,
+ u32 num_pf_cids,
u32 num_vf_cids,
u32 num_tids,
u16 num_pf_pqs,
* @param max_phys_tcs_per_port - max number of physical TCs per port in HW
* @param pf_rl_en - enable per-PF rate limiters
* @param pf_wfq_en - enable per-PF WFQ
- * @param vport_rl_en - enable per-VPORT rate limiters
+ * @param global_rl_en - enable global rate limiters
* @param vport_wfq_en - enable per-VPORT WFQ
- * @param port_params - array of size MAX_NUM_PORTS with params for each port
+ * @param port_params - array with parameters for each port.
+ * @param global_rl_params - array with parameters for each global RL.
+ * If OSAL_NULL, global RLs are not configured.
*
* @return 0 on success, -1 on error.
*/
int ecore_qm_common_rt_init(struct ecore_hwfn *p_hwfn,
- u8 max_ports_per_engine,
- u8 max_phys_tcs_per_port,
- bool pf_rl_en,
- bool pf_wfq_en,
- bool vport_rl_en,
- bool vport_wfq_en,
- struct init_qm_port_params port_params[MAX_NUM_PORTS]);
+ u8 max_ports_per_engine,
+ u8 max_phys_tcs_per_port,
+ bool pf_rl_en,
+ bool pf_wfq_en,
+ bool global_rl_en,
+ bool vport_wfq_en,
+ struct init_qm_port_params port_params[MAX_NUM_PORTS],
+ struct init_qm_global_rl_params
+ global_rl_params[COMMON_MAX_QM_GLOBAL_RLS]);
/**
* @brief ecore_qm_pf_rt_init Prepare QM runtime init values for the PF phase
*
* @param p_hwfn
* @param p_ptt - ptt window used for writing the registers
- * @param port_id - port ID
* @param pf_id - PF ID
* @param max_phys_tcs_per_port - max number of physical TCs per port in HW
- * @param is_first_pf - 1 = first PF in engine, 0 = othwerwise
+ * @param is_pf_loading - indicates if the PF is currently loading,
+ * i.e. it has no allocated QM resources.
* @param num_pf_cids - number of connections used by this PF
* @param num_vf_cids - number of connections used by VFs of this PF
* @param num_tids - number of tasks used by this PF
* @return 0 on success, -1 on error.
*/
int ecore_qm_pf_rt_init(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt,
- u8 port_id,
- u8 pf_id,
- u8 max_phys_tcs_per_port,
- bool is_first_pf,
- u32 num_pf_cids,
- u32 num_vf_cids,
- u32 num_tids,
- u16 start_pq,
- u16 num_pf_pqs,
- u16 num_vf_pqs,
- u8 start_vport,
- u8 num_vports,
- u16 pf_wfq,
- u32 pf_rl,
- struct init_qm_pq_params *pq_params,
- struct init_qm_vport_params *vport_params);
+ struct ecore_ptt *p_ptt,
+ u8 pf_id,
+ u8 max_phys_tcs_per_port,
+ bool is_pf_loading,
+ u32 num_pf_cids,
+ u32 num_vf_cids,
+ u32 num_tids,
+ u16 start_pq,
+ u16 num_pf_pqs,
+ u16 num_vf_pqs,
+ u16 start_vport,
+ u16 num_vports,
+ u16 pf_wfq,
+ u32 pf_rl,
+ struct init_qm_pq_params *pq_params,
+ struct init_qm_vport_params *vport_params);
/**
* @brief ecore_init_pf_wfq Initializes the WFQ weight of the specified PF
* @param first_tx_pq_id- An array containing the first Tx PQ ID associated
* with the VPORT for each TC. This array is filled by
* ecore_qm_pf_rt_init
- * @param vport_wfq - WFQ weight. Must be non-zero.
+ * @param wfq - WFQ weight. Must be non-zero.
*
* @return 0 on success, -1 on error.
*/
int ecore_init_vport_wfq(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
u16 first_tx_pq_id[NUM_OF_TCS],
- u16 vport_wfq);
+ u16 wfq);
+
+/**
+ * @brief ecore_init_global_rl - Initializes the rate limit of the specified
+ * rate limiter.
+ *
+ * @param p_hwfn - HW device data
+ * @param p_ptt - ptt window used for writing the registers
+ * @param rl_id - RL ID
+ * @param rate_limit - rate limit in Mb/sec units
+ *
+ * @return 0 on success, -1 on error.
+ */
+int ecore_init_global_rl(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u16 rl_id,
+ u32 rate_limit);
/**
* @brief ecore_init_vport_rl - Initializes the rate limit of the specified
* VPORT.
*
- * @param p_hwfn - HW device data
- * @param p_ptt - ptt window used for writing the registers
- * @param vport_id - VPORT ID
- * @param vport_rl - rate limit in Mb/sec units
+ * @param p_hwfn - HW device data
+ * @param p_ptt - ptt window used for writing the registers
+ * @param vport_id - VPORT ID
+ * @param vport_rl - rate limit in Mb/sec units
+ * @param link_speed - link speed in Mbps.
*
* @return 0 on success, -1 on error.
*/
int ecore_init_vport_rl(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
u8 vport_id,
- u32 vport_rl);
+ u32 vport_rl,
+ u32 link_speed);
/**
* @brief ecore_send_qm_stop_cmd Sends a stop command to the QM
struct init_brb_ram_req *req);
#endif /* UNUSED_HSI_FUNC */
-#ifndef UNUSED_HSI_FUNC
/**
- * @brief ecore_set_engine_mf_ovlan_eth_type - initializes Nig,Prs,Pbf and llh
- * ethType Regs to input ethType
- * should Be called once per engine
- * if engine
- * is in BD mode.
+ * @brief ecore_set_vxlan_no_l2_enable - enable or disable VXLAN no L2 parsing
*
- * @param p_ptt - ptt window used for writing the registers.
- * @param ethType - etherType to configure
+ * @param p_ptt - ptt window used for writing the registers.
+ * @param enable - VXLAN no L2 enable flag.
*/
-void ecore_set_engine_mf_ovlan_eth_type(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u32 ethType);
+void ecore_set_vxlan_no_l2_enable(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ bool enable);
+#ifndef UNUSED_HSI_FUNC
/**
* @brief ecore_set_port_mf_ovlan_eth_type - initializes DORQ ethType Regs to
* input ethType should Be called
* once per port.
*
- * @param p_ptt - ptt window used for writing the registers.
+ * @param p_hwfn - HW device data
* @param ethType - etherType to configure
*/
void ecore_set_port_mf_ovlan_eth_type(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u32 ethType);
+ u32 ethType);
#endif /* UNUSED_HSI_FUNC */
/**
* @brief ecore_set_vxlan_dest_port - initializes vxlan tunnel destination udp
- * port
+ * port.
*
+ * @param p_hwfn - HW device data
* @param p_ptt - ptt window used for writing the registers.
* @param dest_port - vxlan destination udp port.
*/
/**
* @brief ecore_set_vxlan_enable - enable or disable VXLAN tunnel in HW
*
+ * @param p_hwfn - HW device data
* @param p_ptt - ptt window used for writing the registers.
* @param vxlan_enable - vxlan enable flag.
*/
/**
* @brief ecore_set_gre_enable - enable or disable GRE tunnel in HW
*
+ * @param p_hwfn - HW device data
* @param p_ptt - ptt window used for writing the registers.
* @param eth_gre_enable - eth GRE enable enable flag.
* @param ip_gre_enable - IP GRE enable enable flag.
* @brief ecore_set_geneve_dest_port - initializes geneve tunnel destination
* udp port
*
+ * @param p_hwfn - HW device data
* @param p_ptt - ptt window used for writing the registers.
* @param dest_port - geneve destination udp port.
*/
u16 dest_port);
/**
- * @brief ecore_set_gre_enable - enable or disable GRE tunnel in HW
+ * @brief ecore_set_geneve_enable - enable or disable GRE tunnel in HW
*
+ * @param p_hwfn - HW device data
* @param p_ptt - ptt window used for writing the registers.
* @param eth_geneve_enable - eth GENEVE enable enable flag.
* @param ip_geneve_enable - IP GENEVE enable enable flag.
struct ecore_ptt *p_ptt);
/**
-* @brief ecore_set_rfs_mode_enable - enable and configure HW for RFS
+ * @brief ecore_gft_disable - Disable GFT
+ *
+ * @param p_hwfn - HW device data
+ * @param p_ptt - ptt window used for writing the registers.
+ * @param pf_id - pf on which to disable GFT.
+ */
+void ecore_gft_disable(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u16 pf_id);
+
+/**
+ * @brief ecore_gft_config - Enable and configure HW for GFT
*
+ * @param p_hwfn - HW device data
* @param p_ptt - ptt window used for writing the registers.
-* @param pf_id - pf on which to enable RFS.
+ * @param pf_id - pf on which to enable GFT.
* @param tcp - set profile tcp packets.
* @param udp - set profile udp packet.
* @param ipv4 - set profile ipv4 packet.
* @param ipv6 - set profile ipv6 packet.
+ * @param profile_type - define packet same fields. Use enum gft_profile_type.
*/
-void ecore_set_rfs_mode_enable(struct ecore_hwfn *p_hwfn,
+void ecore_gft_config(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
u16 pf_id,
bool tcp,
bool udp,
bool ipv4,
- bool ipv6);
+ bool ipv6,
+ enum gft_profile_type profile_type);
#endif /* UNUSED_HSI_FUNC */
/**
* @brief ecore_config_vf_zone_size_mode - Configure VF zone size mode. Must be
* used before first ETH queue started.
*
-*
+ * @param p_hwfn - HW device data
* @param p_ptt - ptt window used for writing the registers. Don't care
-* if runtime_init used
+ * if runtime_init used.
* @param mode - VF zone size mode. Use enum vf_zone_size_mode.
-* @param runtime_init - Set 1 to init runtime registers in engine phase. Set 0
-* if VF zone size mode configured after engine phase.
+ * @param runtime_init - Set 1 to init runtime registers in engine phase.
+ * Set 0 if VF zone size mode configured after engine
+ * phase.
*/
void ecore_config_vf_zone_size_mode(struct ecore_hwfn *p_hwfn, struct ecore_ptt
*p_ptt, u16 mode, bool runtime_init);
* @brief ecore_get_mstorm_queue_stat_offset - Get mstorm statistics offset by
* VF zone size mode.
*
+ * @param p_hwfn - HW device data
* @param stat_cnt_id - statistic counter id
* @param vf_zone_size_mode - VF zone size mode. Use enum vf_zone_size_mode.
*/
* @brief ecore_get_mstorm_eth_vf_prods_offset - VF producer offset by VF zone
* size mode.
*
+ * @param p_hwfn - HW device data
* @param vf_id - vf id.
* @param vf_queue_id - per VF rx queue id.
* @param vf_zone_size_mode - vf zone size mode. Use enum vf_zone_size_mode.
* @brief ecore_enable_context_validation - Enable and configure context
* validation.
*
+ * @param p_hwfn - HW device data
* @param p_ptt - ptt window used for writing the registers.
*/
void ecore_enable_context_validation(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt);
/**
* @brief ecore_calc_session_ctx_validation - Calcualte validation byte for
- * session context.
- *
+ * session context.
*
- * @param p_ctx_mem - pointer to context memory.
- * @param ctx_size - context size.
- * @param ctx_type - context type.
- * @param cid - context cid.
+ * @param p_hwfn - HW device data
+ * @param p_ctx_mem - pointer to context memory.
+ * @param ctx_size - context size.
+ * @param ctx_type - context type.
+ * @param cid - context cid.
*/
-void ecore_calc_session_ctx_validation(void *p_ctx_mem, u16 ctx_size,
- u8 ctx_type, u32 cid);
+void ecore_calc_session_ctx_validation(struct ecore_hwfn *p_hwfn,
+ void *p_ctx_mem,
+ u16 ctx_size,
+ u8 ctx_type,
+ u32 cid);
+
/**
* @brief ecore_calc_task_ctx_validation - Calcualte validation byte for task
- * context.
- *
+ * context.
*
- * @param p_ctx_mem - pointer to context memory.
- * @param ctx_size - context size.
- * @param ctx_type - context type.
- * @param tid - context tid.
+ * @param p_hwfn - HW device data
+ * @param p_ctx_mem - pointer to context memory.
+ * @param ctx_size - context size.
+ * @param ctx_type - context type.
+ * @param tid - context tid.
*/
-void ecore_calc_task_ctx_validation(void *p_ctx_mem, u16 ctx_size,
- u8 ctx_type, u32 tid);
+void ecore_calc_task_ctx_validation(struct ecore_hwfn *p_hwfn,
+ void *p_ctx_mem,
+ u16 ctx_size,
+ u8 ctx_type,
+ u32 tid);
+
/**
* @brief ecore_memset_session_ctx - Memset session context to 0 while
- * preserving validation bytes.
- *
+ * preserving validation bytes.
*
- * @param p_ctx_mem - pointer to context memory.
- * @param ctx_size - size to initialzie.
- * @param ctx_type - context type.
+ * @param p_hwfn - HW device data
+ * @param p_ctx_mem - pointer to context memory.
+ * @param ctx_size - size to initialzie.
+ * @param ctx_type - context type.
*/
-void ecore_memset_session_ctx(void *p_ctx_mem, u32 ctx_size,
+void ecore_memset_session_ctx(struct ecore_hwfn *p_hwfn,
+ void *p_ctx_mem,
+ u32 ctx_size,
u8 ctx_type);
+
/**
- * @brief ecore_memset_task_ctx - Memset session context to 0 while preserving
- * validation bytes.
+ * @brief ecore_memset_task_ctx - Memset task context to 0 while preserving
+ * validation bytes.
*
- *
- * @param p_ctx_mem - pointer to context memory.
- * @param ctx_size - size to initialzie.
- * @param ctx_type - context type.
+ * @param p_hwfn - HW device data
+ * @param p_ctx_mem - pointer to context memory.
+ * @param ctx_size - size to initialzie.
+ * @param ctx_type - context type.
*/
-void ecore_memset_task_ctx(void *p_ctx_mem, u32 ctx_size,
+void ecore_memset_task_ctx(struct ecore_hwfn *p_hwfn,
+ void *p_ctx_mem,
+ u32 ctx_size,
u8 ctx_type);
+
+
+/*******************************************************************************
+ * File name : rdma_init.h
+ * Author : Michael Shteinbok
+ *******************************************************************************
+ *******************************************************************************
+ * Description:
+ * RDMA HSI functions header
+ *
+ *******************************************************************************
+ * Notes: This is the input to the auto generated file drv_init_fw_funcs.h
+ *
+ *******************************************************************************
+ */
+#define NUM_STORMS 6
+
+
+
+/**
+ * @brief ecore_set_rdma_error_level - Sets the RDMA assert level.
+ * If the severity of the error will be
+ * above the level, the FW will assert.
+ * @param p_hwfn - HW device data
+ * @param p_ptt - ptt window used for writing the registers
+ * @param assert_level - An array of assert levels for each storm.
+ */
+void ecore_set_rdma_error_level(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u8 assert_level[NUM_STORMS]);
+
+
#endif
git.droids-corp.org / dpdk.git / blobdiff