u16 forced_vlan;
};
+struct ecore_iov_vf_init_params {
+ u16 rel_vf_id;
+
+ /* Number of requested Queues; Currently, don't support different
+ * number of Rx/Tx queues.
+ */
+ /* TODO - remove this limitation */
+ u16 num_queues;
+
+ /* Allow the client to choose which qzones to use for Rx/Tx,
+ * and which queue_base to use for Tx queues on a per-queue basis.
+ * Notice values should be relative to the PF resources.
+ */
+ u16 req_rx_queue[ECORE_MAX_VF_CHAINS_PER_PF];
+ u16 req_tx_queue[ECORE_MAX_VF_CHAINS_PER_PF];
+
+ u8 vport_id;
+
+ /* Should be set in case RSS is going to be used for VF */
+ u8 rss_eng_id;
+};
+
#ifdef CONFIG_ECORE_SW_CHANNEL
/* This is SW channel related only... */
enum mbx_state {
*
* @param p_hwfn
* @param p_ptt
- * @param rel_vf_id
- * @param num_rx_queues
+ * @param p_params
*
* @return enum _ecore_status_t
*/
enum _ecore_status_t ecore_iov_init_hw_for_vf(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
- u16 rel_vf_id,
- u16 num_rx_queues);
+ struct ecore_iov_vf_init_params
+ *p_params);
/**
* @brief ecore_iov_process_mbx_req - process a request received
u16 vfid, bool b_enabled_only);
/**
- * @brief Set pending events bitmap for given @vfid
+ * @brief fills a bitmask of all VFs which have pending unhandled
+ * messages.
*
* @param p_hwfn
- * @param vfid
*/
-void ecore_iov_pf_add_pending_events(struct ecore_hwfn *p_hwfn, u8 vfid);
-
-/**
- * @brief Copy pending events bitmap in @events and clear
- * original copy of events
- *
- * @param p_hwfn
- */
-void ecore_iov_pf_get_and_clear_pending_events(struct ecore_hwfn *p_hwfn,
- u64 *events);
+void ecore_iov_pf_get_pending_events(struct ecore_hwfn *p_hwfn,
+ u64 *events);
/**
* @brief Copy VF's message to PF's buffer
void ecore_iov_get_vfs_opaque_fid(struct ecore_hwfn *p_hwfn, int vfid,
u16 *opaque_fid);
-/**
- * @brief Get VFs VPORT id.
- *
- * @param p_hwfn
- * @param vfid
- * @param vport id
- */
-void ecore_iov_get_vfs_vport_id(struct ecore_hwfn *p_hwfn, int vfid,
- u8 *p_vport_id);
-
/**
* @brief Set forced VLAN [pvid] in PFs copy of bulletin board
* and configures FW/HW to support the configuration.
*/
u32 ecore_iov_pfvf_msg_length(void);
+/**
+ * @brief Returns MAC address if one is configured
+ *
+ * @parm p_hwfn
+ * @parm rel_vf_id
+ *
+ * @return OSAL_NULL if mac isn't set; Otherwise, returns MAC.
+ */
+u8 *ecore_iov_bulletin_get_mac(struct ecore_hwfn *p_hwfn,
+ u16 rel_vf_id);
+
/**
* @brief Returns forced MAC address if one is configured
*
*/
int ecore_iov_get_vf_min_rate(struct ecore_hwfn *p_hwfn, int vfid);
+#endif
+
/**
- * @brief - Configure min rate for VF's vport.
- * @param p_dev
- * @param vfid
- * @param - rate in Mbps
+ * @brief ecore_pf_configure_vf_queue_coalesce - PF configure coalesce
+ * parameters of VFs for Rx and Tx queue.
+ * While the API allows setting coalescing per-qid, all queues sharing a SB
+ * should be in same range [i.e., either 0-0x7f, 0x80-0xff or 0x100-0x1ff]
+ * otherwise configuration would break.
*
- * @return
- */
-enum _ecore_status_t ecore_iov_configure_min_tx_rate(struct ecore_dev *p_dev,
- int vfid, u32 rate);
-#endif
+ * @param p_hwfn
+ * @param rx_coal - Rx Coalesce value in micro seconds.
+ * @param tx_coal - TX Coalesce value in micro seconds.
+ * @param vf_id
+ * @param qid
+ *
+ * @return int
+ **/
+enum _ecore_status_t
+ecore_iov_pf_configure_vf_queue_coalesce(struct ecore_hwfn *p_hwfn,
+ u16 rx_coal, u16 tx_coal,
+ u16 vf_id, u16 qid);
/**
* @brief - Given a VF index, return index of next [including that] active VF.
* @param p_hwfn
* @param rel_vf_id
*
- * @return E4_MAX_NUM_VFS in case no further active VFs, otherwise index.
+ * @return MAX_NUM_VFS_E4 in case no further active VFs, otherwise index.
*/
u16 ecore_iov_get_next_active_vf(struct ecore_hwfn *p_hwfn, u16 rel_vf_id);
+void ecore_iov_bulletin_set_udp_ports(struct ecore_hwfn *p_hwfn, int vfid,
+ u16 vxlan_port, u16 geneve_port);
+
+#ifdef CONFIG_ECORE_SW_CHANNEL
+/**
+ * @brief Set whether PF should communicate with VF using SW/HW channel
+ * Needs to be called for an enabled VF before acquire is over
+ * [latest good point for doing that is OSAL_IOV_VF_ACQUIRE()]
+ *
+ * @param p_hwfn
+ * @param vfid - relative vf index
+ * @param b_is_hw - true iff PF is to use HW channel for communication
+ */
+void ecore_iov_set_vf_hw_channel(struct ecore_hwfn *p_hwfn, int vfid,
+ bool b_is_hw);
+#endif
#endif /* CONFIG_ECORE_SRIOV */
#define ecore_for_each_vf(_p_hwfn, _i) \
for (_i = ecore_iov_get_next_active_vf(_p_hwfn, 0); \
- _i < E4_MAX_NUM_VFS; \
+ _i < MAX_NUM_VFS_E4; \
_i = ecore_iov_get_next_active_vf(_p_hwfn, _i + 1))
#endif
git.droids-corp.org / dpdk.git / blobdiff