-/*
- * Copyright (c) 2016 QLogic Corporation.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (c) 2016 - 2018 Cavium Inc.
* All rights reserved.
- * www.qlogic.com
- *
- * See LICENSE.qede_pmd for copyright and licensing details.
+ * www.cavium.com
*/
#ifndef __ECORE_L2_API_H__
#include "ecore_status.h"
#include "ecore_sp_api.h"
+#include "ecore_int_api.h"
#ifndef __EXTRACT__LINUX__
enum ecore_rss_caps {
#endif
struct ecore_queue_start_common_params {
- /* Rx/Tx queue relative id to keep obtained cid in corresponding array
- * RX - upper-bounded by number of FW-queues
- */
- u16 queue_id;
+ /* Should always be relative to entity sending this. */
u8 vport_id;
+ u16 queue_id;
- /* q_zone_id is relative, may be different from queue id
- * currently used by Tx-only, upper-bounded by number of FW-queues
- */
- u16 qzone_id;
-
- /* stats_id is relative or absolute depends on function */
+ /* Relative, but relevant only for PFs */
u8 stats_id;
- u16 sb;
- u16 sb_idx;
- u16 vf_qid;
+
+ struct ecore_sb_info *p_sb;
+ u8 sb_idx;
+};
+
+struct ecore_rxq_start_ret_params {
+ void OSAL_IOMEM *p_prod;
+ void *p_handle;
+};
+
+struct ecore_txq_start_ret_params {
+ void OSAL_IOMEM *p_doorbell;
+ void *p_handle;
};
struct ecore_rss_params {
u8 update_rss_key;
u8 rss_caps;
u8 rss_table_size_log; /* The table size is 2 ^ rss_table_size_log */
- u16 rss_ind_table[ECORE_RSS_IND_TABLE_SIZE];
+
+ /* Indirection table consist of rx queue handles */
+ void *rss_ind_table[ECORE_RSS_IND_TABLE_SIZE];
u32 rss_key[ECORE_RSS_KEY_SIZE];
};
#define ECORE_ACCEPT_MCAST_MATCHED 0x08
#define ECORE_ACCEPT_MCAST_UNMATCHED 0x10
#define ECORE_ACCEPT_BCAST 0x20
+#define ECORE_ACCEPT_ANY_VNI 0x40
+};
+
+enum ecore_filter_config_mode {
+ ECORE_FILTER_CONFIG_MODE_DISABLE,
+ ECORE_FILTER_CONFIG_MODE_5_TUPLE,
+ ECORE_FILTER_CONFIG_MODE_L4_PORT,
+ ECORE_FILTER_CONFIG_MODE_IP_DEST,
+ ECORE_FILTER_CONFIG_MODE_TUNN_TYPE,
+ ECORE_FILTER_CONFIG_MODE_IP_SRC,
+};
+
+struct ecore_arfs_config_params {
+ bool tcp;
+ bool udp;
+ bool ipv4;
+ bool ipv6;
+ enum ecore_filter_config_mode mode;
};
/* Add / remove / move / remove-all unicast MAC-VLAN filters.
struct ecore_spq_comp_cb *p_comp_data);
/**
- * @brief ecore_sp_eth_rx_queue_start - RX Queue Start Ramrod
+ * @brief ecore_eth_rx_queue_start - RX Queue Start Ramrod
*
* This ramrod initializes an RX Queue for a VPort. An Assert is generated if
* the VPort ID is not currently initialized.
*
* @param p_hwfn
* @param opaque_fid
- * @p_params [stats_id is relative, packed in p_params]
+ * @p_params Inputs; Relative for PF [SB being an exception]
* @param bd_max_bytes Maximum bytes that can be placed on a BD
* @param bd_chain_phys_addr Physical address of BDs for receive.
* @param cqe_pbl_addr Physical address of the CQE PBL Table.
* @param cqe_pbl_size Size of the CQE PBL Table
- * @param pp_prod Pointer to place producer's
- * address for the Rx Q (May be
- * NULL).
+ * @param p_ret_params Pointed struct to be filled with outputs.
*
* @return enum _ecore_status_t
*/
enum _ecore_status_t
-ecore_sp_eth_rx_queue_start(struct ecore_hwfn *p_hwfn,
- u16 opaque_fid,
- struct ecore_queue_start_common_params *p_params,
- u16 bd_max_bytes,
- dma_addr_t bd_chain_phys_addr,
- dma_addr_t cqe_pbl_addr,
- u16 cqe_pbl_size,
- void OSAL_IOMEM * *pp_prod);
+ecore_eth_rx_queue_start(struct ecore_hwfn *p_hwfn,
+ u16 opaque_fid,
+ struct ecore_queue_start_common_params *p_params,
+ u16 bd_max_bytes,
+ dma_addr_t bd_chain_phys_addr,
+ dma_addr_t cqe_pbl_addr,
+ u16 cqe_pbl_size,
+ struct ecore_rxq_start_ret_params *p_ret_params);
/**
- * @brief ecore_sp_eth_rx_queue_stop -
- *
- * This ramrod closes an RX queue. It sends RX queue stop ramrod
- * + CFC delete ramrod
+ * @brief ecore_eth_rx_queue_stop - This ramrod closes an Rx queue
*
* @param p_hwfn
- * @param rx_queue_id RX Queue ID
+ * @param p_rxq Handler of queue to close
* @param eq_completion_only If True completion will be on
* EQe, if False completion will be
* on EQe if p_hwfn opaque
* @return enum _ecore_status_t
*/
enum _ecore_status_t
-ecore_sp_eth_rx_queue_stop(struct ecore_hwfn *p_hwfn,
- u16 rx_queue_id,
- bool eq_completion_only,
- bool cqe_completion);
+ecore_eth_rx_queue_stop(struct ecore_hwfn *p_hwfn,
+ void *p_rxq,
+ bool eq_completion_only,
+ bool cqe_completion);
/**
- * @brief ecore_sp_eth_tx_queue_start - TX Queue Start Ramrod
+ * @brief - TX Queue Start Ramrod
*
* This ramrod initializes a TX Queue for a VPort. An Assert is generated if
* the VPort is not currently initialized.
* @param tc traffic class to use with this L2 txq
* @param pbl_addr address of the pbl array
* @param pbl_size number of entries in pbl
- * @param pp_doorbell Pointer to place doorbell pointer (May be NULL).
- * This address should be used with the
- * DIRECT_REG_WR macro.
+ * @param p_ret_params Pointer to fill the return parameters in.
*
* @return enum _ecore_status_t
*/
enum _ecore_status_t
-ecore_sp_eth_tx_queue_start(struct ecore_hwfn *p_hwfn,
- u16 opaque_fid,
- struct ecore_queue_start_common_params *p_params,
- u8 tc,
- dma_addr_t pbl_addr,
- u16 pbl_size,
- void OSAL_IOMEM * *pp_doorbell);
+ecore_eth_tx_queue_start(struct ecore_hwfn *p_hwfn,
+ u16 opaque_fid,
+ struct ecore_queue_start_common_params *p_params,
+ u8 tc,
+ dma_addr_t pbl_addr,
+ u16 pbl_size,
+ struct ecore_txq_start_ret_params *p_ret_params);
/**
- * @brief ecore_sp_eth_tx_queue_stop -
- *
- * This ramrod closes a TX queue. It sends TX queue stop ramrod
- * + CFC delete ramrod
+ * @brief ecore_eth_tx_queue_stop - closes a Tx queue
*
* @param p_hwfn
- * @param tx_queue_id TX Queue ID
+ * @param p_txq - handle to Tx queue needed to be closed
*
* @return enum _ecore_status_t
*/
-enum _ecore_status_t ecore_sp_eth_tx_queue_stop(struct ecore_hwfn *p_hwfn,
- u16 tx_queue_id);
+enum _ecore_status_t ecore_eth_tx_queue_stop(struct ecore_hwfn *p_hwfn,
+ void *p_txq);
enum ecore_tpa_mode {
ECORE_TPA_MODE_NONE,
bool b_err_big_pkt;
bool b_err_anti_spoof;
bool b_err_ctrl_frame;
+ bool b_en_rgfs;
+ bool b_en_tgfs;
};
/**
u8 anti_spoofing_en;
u8 update_accept_any_vlan_flg;
u8 accept_any_vlan;
- unsigned long bins[8];
+ u32 bins[8];
struct ecore_rss_params *rss_params;
struct ecore_filter_accept_flags accept_flags;
struct ecore_sge_tpa_params *sge_tpa_params;
/* MTU change - notice this requires the vport to be disabled.
* If non-zero, value would be used.
*/
- u16 mtu;
+ u16 mtu;
+ u8 update_ctl_frame_check;
+ u8 mac_chk_en;
+ u8 ethtype_chk_en;
};
/**
* @note Final phase API.
*
* @param p_hwfn
- * @param rx_queue_id RX Queue ID
- * @param num_rxqs Allow to update multiple rx
- * queues, from rx_queue_id to
- * (rx_queue_id + num_rxqs)
+ * @param pp_rxq_handlers An array of queue handlers to be updated.
+ * @param num_rxqs number of queues to update.
* @param complete_cqe_flg Post completion to the CQE Ring if set
* @param complete_event_flg Post completion to the Event Ring if set
+ * @param comp_mode
+ * @param p_comp_data
*
* @return enum _ecore_status_t
*/
enum _ecore_status_t
ecore_sp_eth_rx_queues_update(struct ecore_hwfn *p_hwfn,
- u16 rx_queue_id,
+ void **pp_rxq_handlers,
u8 num_rxqs,
u8 complete_cqe_flg,
u8 complete_event_flg,
void ecore_reset_vport_stats(struct ecore_dev *p_dev);
+/**
+ *@brief ecore_arfs_mode_configure -
+ *
+ *Enable or disable rfs mode. It must accept atleast one of tcp or udp true
+ *and atleast one of ipv4 or ipv6 true to enable rfs mode.
+ *
+ *@param p_hwfn
+ *@param p_ptt
+ *@param p_cfg_params arfs mode configuration parameters.
+ *
+ */
+void ecore_arfs_mode_configure(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ struct ecore_arfs_config_params *p_cfg_params);
+
+struct ecore_ntuple_filter_params {
+ /* Physically mapped address containing header of buffer to be used
+ * as filter.
+ */
+ dma_addr_t addr;
+
+ /* Length of header in bytes */
+ u16 length;
+
+ /* Relative queue-id to receive classified packet */
+ #define ECORE_RFS_NTUPLE_QID_RSS ((u16)-1)
+ u16 qid;
+
+ /* Identifier can either be according to vport-id or vfid */
+ bool b_is_vf;
+ u8 vport_id;
+ u8 vf_id;
+
+ /* true if this filter is to be added. Else to be removed */
+ bool b_is_add;
+
+ /* If packet needs to be dropped */
+ bool b_is_drop;
+};
+
+/**
+ * @brief - ecore_configure_rfs_ntuple_filter
+ *
+ * This ramrod should be used to add or remove arfs hw filter
+ *
+ * @params p_hwfn
+ * @params p_cb Used for ECORE_SPQ_MODE_CB,where client would initialize
+ * it with cookie and callback function address, if not
+ * using this mode then client must pass NULL.
+ * @params p_params
+ */
+enum _ecore_status_t
+ecore_configure_rfs_ntuple_filter(struct ecore_hwfn *p_hwfn,
+ struct ecore_spq_comp_cb *p_cb,
+ struct ecore_ntuple_filter_params *p_params);
+
+/**
+ * @brief - ecore_update_eth_rss_ind_table_entry
+ *
+ * This function being used to update RSS indirection table entry to FW RAM
+ * instead of using the SP vport update ramrod with rss params.
+ *
+ * Notice:
+ * This function supports only one outstanding command per engine. Ecore
+ * clients which use this function should call ecore_mcp_ind_table_lock() prior
+ * to it and ecore_mcp_ind_table_unlock() after it.
+ *
+ * @params p_hwfn
+ * @params vport_id
+ * @params ind_table_index
+ * @params ind_table_value
+ *
+ * @return enum _ecore_status_t
+ */
+enum _ecore_status_t
+ecore_update_eth_rss_ind_table_entry(struct ecore_hwfn *p_hwfn,
+ u8 vport_id,
+ u8 ind_table_index,
+ u16 ind_table_value);
#endif
git.droids-corp.org / dpdk.git / blobdiff