bool forced_tx;
};
+enum ecore_mcp_eee_mode {
+ ECORE_MCP_EEE_DISABLED,
+ ECORE_MCP_EEE_ENABLED,
+ ECORE_MCP_EEE_UNSUPPORTED
+};
+
+struct ecore_link_eee_params {
+ u32 tx_lpi_timer;
+#define ECORE_EEE_1G_ADV (1 << 0)
+#define ECORE_EEE_10G_ADV (1 << 1)
+ /* Capabilities are represented using ECORE_EEE_*_ADV values */
+ u8 adv_caps;
+ u8 lp_adv_caps;
+ bool enable;
+ bool tx_lpi_enable;
+};
+
struct ecore_mcp_link_params {
struct ecore_mcp_link_speed_params speed;
struct ecore_mcp_link_pause_params pause;
u32 loopback_mode; /* in PMM_LOOPBACK values */
+ struct ecore_link_eee_params eee;
};
struct ecore_mcp_link_capabilities {
u32 speed_capabilities;
bool default_speed_autoneg; /* In Mb/s */
u32 default_speed; /* In Mb/s */
+ enum ecore_mcp_eee_mode default_eee;
+ u32 eee_lpi_timer;
+ u8 eee_speed_caps;
};
struct ecore_mcp_link_state {
bool link_up;
- u32 line_speed; /* In Mb/s */
u32 min_pf_rate; /* In Mb/s */
- u32 speed; /* In Mb/s */
+
+ /* Actual link speed in Mb/s */
+ u32 line_speed;
+
+ /* PF max speed in MB/s, deduced from line_speed
+ * according to PF max bandwidth configuration.
+ */
+ u32 speed;
bool full_duplex;
bool an;
u8 partner_adv_pause;
bool sfp_tx_fault;
+
+ bool eee_active;
+ u8 eee_adv_caps;
+ u8 eee_lp_adv_caps;
};
struct ecore_mcp_function_info {
u16 mtu;
};
-struct ecore_mcp_nvm_common {
- u32 offset;
- u32 param;
- u32 resp;
- u32 cmd;
-};
-
-struct ecore_mcp_nvm_rd {
- u32 *buf_size;
- u32 *buf;
-};
-
-struct ecore_mcp_nvm_wr {
- u32 buf_size;
- u32 *buf;
-};
-
-struct ecore_mcp_nvm_params {
-#define ECORE_MCP_CMD (1 << 0)
-#define ECORE_MCP_NVM_RD (1 << 1)
-#define ECORE_MCP_NVM_WR (1 << 2)
- u8 type;
-
- struct ecore_mcp_nvm_common nvm_common;
-
- union {
- struct ecore_mcp_nvm_rd nvm_rd;
- struct ecore_mcp_nvm_wr nvm_wr;
- };
-};
-
#ifndef __EXTRACT__LINUX__
enum ecore_nvm_images {
ECORE_NVM_IMAGE_ISCSI_CFG,
*ecore_mcp_get_link_capabilities(struct ecore_hwfn *p_hwfn);
/**
- * @brief Request the MFW to set the the link according to 'link_input'.
+ * @brief Request the MFW to set the link according to 'link_input'.
*
* @param p_hwfn
* @param p_ptt
* @brief Get media type value of the port.
*
* @param p_dev - ecore dev pointer
+ * @param p_ptt
* @param mfw_ver - media type value
*
* @return enum _ecore_status_t -
* ECORE_SUCCESS - Operation was successful.
* ECORE_BUSY - Operation failed
*/
-enum _ecore_status_t ecore_mcp_get_media_type(struct ecore_dev *p_dev,
- u32 *media_type);
+enum _ecore_status_t ecore_mcp_get_media_type(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u32 *media_type);
+
+/**
+ * @brief Get transceiver data of the port.
+ *
+ * @param p_dev - ecore dev pointer
+ * @param p_ptt
+ * @param p_transceiver_type - media type value
+ *
+ * @return enum _ecore_status_t -
+ * ECORE_SUCCESS - Operation was successful.
+ * ECORE_BUSY - Operation failed
+ */
+enum _ecore_status_t ecore_mcp_get_transceiver_data(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u32 *p_tranceiver_type);
+
+/**
+ * @brief Get transceiver supported speed mask.
+ *
+ * @param p_dev - ecore dev pointer
+ * @param p_ptt
+ * @param p_speed_mask - Bit mask of all supported speeds.
+ *
+ * @return enum _ecore_status_t -
+ * ECORE_SUCCESS - Operation was successful.
+ * ECORE_BUSY - Operation failed
+ */
+
+enum _ecore_status_t ecore_mcp_trans_speed_mask(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u32 *p_speed_mask);
+
+/**
+ * @brief Get board configuration.
+ *
+ * @param p_dev - ecore dev pointer
+ * @param p_ptt
+ * @param p_board_config - Board config.
+ *
+ * @return enum _ecore_status_t -
+ * ECORE_SUCCESS - Operation was successful.
+ * ECORE_BUSY - Operation failed
+ */
+enum _ecore_status_t ecore_mcp_get_board_config(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u32 *p_board_config);
/**
* @brief - Sends a command to the MCP mailbox.
* @param p_hwfn - hw function
* @param p_ptt - PTT required for register access
* @param cmd - command to be sent to the MCP
- * @param param - optional param
- * @param o_mcp_resp - the MCP response code (exclude sequence)
- * @param o_mcp_param - optional parameter provided by the MCP response
+ * @param param - Optional param
+ * @param o_mcp_resp - The MCP response code (exclude sequence)
+ * @param o_mcp_param - Optional parameter provided by the MCP response
*
* @return enum _ecore_status_t -
* ECORE_SUCCESS - operation was successful
*ecore_mcp_get_function_info(struct ecore_hwfn *p_hwfn);
#endif
-/**
- * @brief - Function for reading/manipulating the nvram. Following are supported
- * functionalities.
- * 1. Read: Read the specified nvram offset.
- * input values:
- * type - ECORE_MCP_NVM_RD
- * cmd - command code (e.g. DRV_MSG_CODE_NVM_READ_NVRAM)
- * offset - nvm offset
- *
- * output values:
- * buf - buffer
- * buf_size - buffer size
- *
- * 2. Write: Write the data at the specified nvram offset
- * input values:
- * type - ECORE_MCP_NVM_WR
- * cmd - command code (e.g. DRV_MSG_CODE_NVM_WRITE_NVRAM)
- * offset - nvm offset
- * buf - buffer
- * buf_size - buffer size
- *
- * 3. Command: Send the NVM command to MCP.
- * input values:
- * type - ECORE_MCP_CMD
- * cmd - command code (e.g. DRV_MSG_CODE_NVM_DEL_FILE)
- * offset - nvm offset
- *
- *
- * @param p_hwfn
- * @param p_ptt
- * @param params
- *
- * @return ECORE_SUCCESS - operation was successful.
- */
-enum _ecore_status_t ecore_mcp_nvm_command(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt,
- struct ecore_mcp_nvm_params *params);
-
#ifndef LINUX_REMOVE
/**
* @brief - count number of function with a matching personality on engine.
* @param p_dev
* @param addr - nvm offset
* @param cmd - nvm command
- * @param p_buf - nvm write buffer
+ * @param p_buf - nvm read buffer
* @param len - buffer len
*
* @return enum _ecore_status_t - ECORE_SUCCESS - operation was successful.
*
* @param p_dev
* @param addr - nvm offset
- * @param p_buf - nvm write buffer
+ * @param p_buf - nvm read buffer
* @param len - buffer len
*
* @return enum _ecore_status_t - ECORE_SUCCESS - operation was successful.
enum _ecore_status_t ecore_mcp_nvm_read(struct ecore_dev *p_dev, u32 addr,
u8 *p_buf, u32 len);
+/**
+ * @brief - Sends an NVM write command request to the MFW with
+ * payload.
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ * @param cmd - Command: Either DRV_MSG_CODE_NVM_WRITE_NVRAM or
+ * DRV_MSG_CODE_NVM_PUT_FILE_DATA
+ * @param param - [0:23] - Offset [24:31] - Size
+ * @param o_mcp_resp - MCP response
+ * @param o_mcp_param - MCP response param
+ * @param i_txn_size - Buffer size
+ * @param i_buf - Pointer to the buffer
+ *
+ * @param return ECORE_SUCCESS upon success.
+ */
+enum _ecore_status_t ecore_mcp_nvm_wr_cmd(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u32 cmd,
+ u32 param,
+ u32 *o_mcp_resp,
+ u32 *o_mcp_param,
+ u32 i_txn_size,
+ u32 *i_buf);
+
+/**
+ * @brief - Sends an NVM read command request to the MFW to get
+ * a buffer.
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ * @param cmd - Command: DRV_MSG_CODE_NVM_GET_FILE_DATA or
+ * DRV_MSG_CODE_NVM_READ_NVRAM commands
+ * @param param - [0:23] - Offset [24:31] - Size
+ * @param o_mcp_resp - MCP response
+ * @param o_mcp_param - MCP response param
+ * @param o_txn_size - Buffer size output
+ * @param o_buf - Pointer to the buffer returned by the MFW.
+ *
+ * @param return ECORE_SUCCESS upon success.
+ */
+enum _ecore_status_t ecore_mcp_nvm_rd_cmd(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u32 cmd,
+ u32 param,
+ u32 *o_mcp_resp,
+ u32 *o_mcp_param,
+ u32 *o_txn_size,
+ u32 *o_buf);
+
/**
* @brief Read from sfp
*
enum _ecore_status_t ecore_mcp_mdump_clear_logs(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt);
+/**
+ * @brief - Clear the mdump retained data.
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ *
+ * @param return ECORE_SUCCESS upon success.
+ */
+enum _ecore_status_t ecore_mcp_mdump_clr_retain(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt);
+
/**
* @brief - Processes the TLV request from MFW i.e., get the required TLV info
* from the ecore client and send it to the MFW.
enum _ecore_status_t ecore_mfw_process_tlv_req(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt);
+
+/**
+ * @brief - Return whether management firmware support smart AN
+ *
+ * @param p_hwfn
+ *
+ * @return bool - true iff feature is supported.
+ */
+bool ecore_mcp_is_smart_an_supported(struct ecore_hwfn *p_hwfn);
#endif