#define MCP_VALIDITY_ACTIVE_MFW_NONE 0x000001c0
u32 link_status;
-#define LINK_STATUS_LINK_UP 0x00000001
-#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001e
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (1 << 1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (2 << 1)
+#define LINK_STATUS_LINK_UP 0x00000001
+#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001e
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (1 << 1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (2 << 1)
#define LINK_STATUS_SPEED_AND_DUPLEX_10G (3 << 1)
#define LINK_STATUS_SPEED_AND_DUPLEX_20G (4 << 1)
#define LINK_STATUS_SPEED_AND_DUPLEX_40G (5 << 1)
#define LINK_STATUS_SPEED_AND_DUPLEX_50G (6 << 1)
#define LINK_STATUS_SPEED_AND_DUPLEX_100G (7 << 1)
#define LINK_STATUS_SPEED_AND_DUPLEX_25G (8 << 1)
-
-#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020
-
-#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040
-#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080
-
-#define LINK_STATUS_PFC_ENABLED 0x00000100
+#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020
+#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040
+#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080
+#define LINK_STATUS_PFC_ENABLED 0x00000100
#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200
#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400
#define LINK_STATUS_LINK_PARTNER_10G_CAPABLE 0x00000800
#define LINK_STATUS_LINK_PARTNER_50G_CAPABLE 0x00004000
#define LINK_STATUS_LINK_PARTNER_100G_CAPABLE 0x00008000
#define LINK_STATUS_LINK_PARTNER_25G_CAPABLE 0x00010000
-
#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000
-#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0 << 18)
-#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1 << 18)
-#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2 << 18)
+#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0 << 18)
+#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1 << 18)
+#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2 << 18)
#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3 << 18)
-
-#define LINK_STATUS_SFP_TX_FAULT 0x00100000
-#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00200000
-#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00400000
-#define LINK_STATUS_RX_SIGNAL_PRESENT 0x00800000
-#define LINK_STATUS_MAC_LOCAL_FAULT 0x01000000
-#define LINK_STATUS_MAC_REMOTE_FAULT 0x02000000
-#define LINK_STATUS_UNSUPPORTED_SPD_REQ 0x04000000
-
-#define LINK_STATUS_FEC_MODE_MASK 0x38000000
+#define LINK_STATUS_SFP_TX_FAULT 0x00100000
+#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00200000
+#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00400000
+#define LINK_STATUS_RX_SIGNAL_PRESENT 0x00800000
+#define LINK_STATUS_MAC_LOCAL_FAULT 0x01000000
+#define LINK_STATUS_MAC_REMOTE_FAULT 0x02000000
+#define LINK_STATUS_UNSUPPORTED_SPD_REQ 0x04000000
+#define LINK_STATUS_FEC_MODE_MASK 0x38000000
#define LINK_STATUS_FEC_MODE_NONE (0 << 27)
#define LINK_STATUS_FEC_MODE_FIRECODE_CL74 (1 << 27)
#define LINK_STATUS_FEC_MODE_RS_CL91 (2 << 27)
u32 fc_npiv_nvram_tbl_addr;
u32 fc_npiv_nvram_tbl_size;
u32 transceiver_data;
-#define ETH_TRANSCEIVER_STATE_MASK 0x000000FF
-#define ETH_TRANSCEIVER_STATE_SHIFT 0x00000000
-#define ETH_TRANSCEIVER_STATE_UNPLUGGED 0x00000000
-#define ETH_TRANSCEIVER_STATE_PRESENT 0x00000001
-#define ETH_TRANSCEIVER_STATE_VALID 0x00000003
-#define ETH_TRANSCEIVER_STATE_UPDATING 0x00000008
-#define ETH_TRANSCEIVER_TYPE_MASK 0x0000FF00
-#define ETH_TRANSCEIVER_TYPE_SHIFT 0x00000008
-#define ETH_TRANSCEIVER_TYPE_NONE 0x00000000
-#define ETH_TRANSCEIVER_TYPE_UNKNOWN 0x000000FF
+#define ETH_TRANSCEIVER_STATE_MASK 0x000000FF
+#define ETH_TRANSCEIVER_STATE_SHIFT 0x00000000
+#define ETH_TRANSCEIVER_STATE_UNPLUGGED 0x00000000
+#define ETH_TRANSCEIVER_STATE_PRESENT 0x00000001
+#define ETH_TRANSCEIVER_STATE_VALID 0x00000003
+#define ETH_TRANSCEIVER_STATE_UPDATING 0x00000008
+#define ETH_TRANSCEIVER_TYPE_MASK 0x0000FF00
+#define ETH_TRANSCEIVER_TYPE_SHIFT 0x00000008
+#define ETH_TRANSCEIVER_TYPE_NONE 0x00000000
+#define ETH_TRANSCEIVER_TYPE_UNKNOWN 0x000000FF
/* 1G Passive copper cable */
-#define ETH_TRANSCEIVER_TYPE_1G_PCC 0x01
+#define ETH_TRANSCEIVER_TYPE_1G_PCC 0x01
/* 1G Active copper cable */
-#define ETH_TRANSCEIVER_TYPE_1G_ACC 0x02
-#define ETH_TRANSCEIVER_TYPE_1G_LX 0x03
-#define ETH_TRANSCEIVER_TYPE_1G_SX 0x04
-#define ETH_TRANSCEIVER_TYPE_10G_SR 0x05
-#define ETH_TRANSCEIVER_TYPE_10G_LR 0x06
-#define ETH_TRANSCEIVER_TYPE_10G_LRM 0x07
-#define ETH_TRANSCEIVER_TYPE_10G_ER 0x08
+#define ETH_TRANSCEIVER_TYPE_1G_ACC 0x02
+#define ETH_TRANSCEIVER_TYPE_1G_LX 0x03
+#define ETH_TRANSCEIVER_TYPE_1G_SX 0x04
+#define ETH_TRANSCEIVER_TYPE_10G_SR 0x05
+#define ETH_TRANSCEIVER_TYPE_10G_LR 0x06
+#define ETH_TRANSCEIVER_TYPE_10G_LRM 0x07
+#define ETH_TRANSCEIVER_TYPE_10G_ER 0x08
/* 10G Passive copper cable */
-#define ETH_TRANSCEIVER_TYPE_10G_PCC 0x09
+#define ETH_TRANSCEIVER_TYPE_10G_PCC 0x09
/* 10G Active copper cable */
-#define ETH_TRANSCEIVER_TYPE_10G_ACC 0x0a
-#define ETH_TRANSCEIVER_TYPE_XLPPI 0x0b
-#define ETH_TRANSCEIVER_TYPE_40G_LR4 0x0c
-#define ETH_TRANSCEIVER_TYPE_40G_SR4 0x0d
-#define ETH_TRANSCEIVER_TYPE_40G_CR4 0x0e
-#define ETH_TRANSCEIVER_TYPE_100G_AOC 0x0f /* Active optical cable */
-#define ETH_TRANSCEIVER_TYPE_100G_SR4 0x10
-#define ETH_TRANSCEIVER_TYPE_100G_LR4 0x11
-#define ETH_TRANSCEIVER_TYPE_100G_ER4 0x12
-#define ETH_TRANSCEIVER_TYPE_100G_ACC 0x13 /* Active copper cable */
-#define ETH_TRANSCEIVER_TYPE_100G_CR4 0x14
-#define ETH_TRANSCEIVER_TYPE_4x10G_SR 0x15
+#define ETH_TRANSCEIVER_TYPE_10G_ACC 0x0a
+#define ETH_TRANSCEIVER_TYPE_XLPPI 0x0b
+#define ETH_TRANSCEIVER_TYPE_40G_LR4 0x0c
+#define ETH_TRANSCEIVER_TYPE_40G_SR4 0x0d
+#define ETH_TRANSCEIVER_TYPE_40G_CR4 0x0e
+/* Active optical cable */
+#define ETH_TRANSCEIVER_TYPE_100G_AOC 0x0f
+#define ETH_TRANSCEIVER_TYPE_100G_SR4 0x10
+#define ETH_TRANSCEIVER_TYPE_100G_LR4 0x11
+#define ETH_TRANSCEIVER_TYPE_100G_ER4 0x12
+/* Active copper cable */
+#define ETH_TRANSCEIVER_TYPE_100G_ACC 0x13
+#define ETH_TRANSCEIVER_TYPE_100G_CR4 0x14
+#define ETH_TRANSCEIVER_TYPE_4x10G_SR 0x15
/* 25G Passive copper cable - short */
-#define ETH_TRANSCEIVER_TYPE_25G_CA_N 0x16
+#define ETH_TRANSCEIVER_TYPE_25G_CA_N 0x16
/* 25G Active copper cable - short */
-#define ETH_TRANSCEIVER_TYPE_25G_ACC_S 0x17
+#define ETH_TRANSCEIVER_TYPE_25G_ACC_S 0x17
/* 25G Passive copper cable - medium */
#define ETH_TRANSCEIVER_TYPE_25G_CA_S 0x18
/* 25G Active copper cable - medium */
* MCP_REG_CPU_STATE/MCP_REG_CPU_MODE registers.
*/
#define DRV_MSG_CODE_MCP_HALT 0x00100000
+/* Set virtual mac address, params [31:6] - reserved, [5:4] - type,
+ * [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
+ */
+#define DRV_MSG_CODE_SET_VMAC 0x00110000
+/* Set virtual mac address, params [31:6] - reserved, [5:4] - type,
+ * [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
+ */
+#define DRV_MSG_CODE_GET_VMAC 0x00120000
+ #define DRV_MSG_CODE_VMAC_TYPE_MAC 1
+ #define DRV_MSG_CODE_VMAC_TYPE_WWNN 2
+ #define DRV_MSG_CODE_VMAC_TYPE_WWPN 3
+/* Get statistics from pf, params [31:4] - reserved, [3:0] - stats type */
+#define DRV_MSG_CODE_GET_STATS 0x00130000
+ #define DRV_MSG_CODE_STATS_TYPE_LAN 1
+ #define DRV_MSG_CODE_STATS_TYPE_FCOE 2
+ #define DRV_MSG_CODE_STATS_TYPE_ISCSI 3
+ #define DRV_MSG_CODE_STATS_TYPE_RDMA 4
/* Host shall provide buffer and size for MFW */
#define DRV_MSG_CODE_PMD_DIAG_DUMP 0x00140000
/* Host shall provide buffer and size for MFW */
* [16:31] - offset
*/
#define DRV_MSG_CODE_TRANSCEIVER_WRITE 0x00170000
-
-/* Set virtual mac address, params [31:6] - reserved, [5:4] - type,
- * [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
- */
-#define DRV_MSG_CODE_SET_VMAC 0x00110000
-/* Set virtual mac address, params [31:6] - reserved, [5:4] - type,
- * [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
- */
-#define DRV_MSG_CODE_GET_VMAC 0x00120000
-#define DRV_MSG_CODE_VMAC_TYPE_MAC 1
-#define DRV_MSG_CODE_VMAC_TYPE_WWNN 2
-#define DRV_MSG_CODE_VMAC_TYPE_WWPN 3
-
-/* Get statistics from pf, params [31:4] - reserved, [3:0] - stats type */
-#define DRV_MSG_CODE_GET_STATS 0x00130000
-#define DRV_MSG_CODE_STATS_TYPE_LAN 1
-#define DRV_MSG_CODE_STATS_TYPE_FCOE 2
-#define DRV_MSG_CODE_STATS_TYPE_ISCSI 3
-#define DRV_MSG_CODE_STATS_TYPE_RDMA 4
-
/* indicate OCBB related information */
#define DRV_MSG_CODE_OCBB_DATA 0x00180000
-
/* Set function BW, params[15:8] - min, params[7:0] - max */
#define DRV_MSG_CODE_SET_BW 0x00190000
#define BW_MAX_MASK 0x000000ff
#define DRV_MSG_CODE_MASK_PARITIES 0x001a0000
/* param[0] - Simulate fan failure, param[1] - simulate over temp. */
#define DRV_MSG_CODE_INDUCE_FAILURE 0x001b0000
-#define DRV_MSG_FAN_FAILURE_TYPE (1 << 0)
-#define DRV_MSG_TEMPERATURE_FAILURE_TYPE (1 << 1)
-
+ #define DRV_MSG_FAN_FAILURE_TYPE (1 << 0)
+ #define DRV_MSG_TEMPERATURE_FAILURE_TYPE (1 << 1)
/* Param: [0:15] - gpio number */
#define DRV_MSG_CODE_GPIO_READ 0x001c0000
/* Param: [0:15] - gpio number, [16:31] - gpio value */
#define DRV_MSG_CODE_GPIO_WRITE 0x001d0000
-/* Param: [0:15] - gpio number */
-#define DRV_MSG_CODE_GPIO_INFO 0x00270000
-
/* Param: [0:7] - test enum, [8:15] - image index, [16:31] - reserved */
#define DRV_MSG_CODE_BIST_TEST 0x001e0000
#define DRV_MSG_CODE_GET_TEMPERATURE 0x001f0000
* param[15:8] - age
*/
#define DRV_MSG_CODE_RESOURCE_CMD 0x00230000
-
-/* request resource ownership with default aging */
-#define RESOURCE_OPCODE_REQ 1
-/* request resource ownership without aging */
-#define RESOURCE_OPCODE_REQ_WO_AGING 2
-/* request resource ownership with specific aging timer (in seconds) */
-#define RESOURCE_OPCODE_REQ_W_AGING 3
-#define RESOURCE_OPCODE_RELEASE 4 /* release resource */
-#define RESOURCE_OPCODE_FORCE_RELEASE 5 /* force resource release */
-
-/* resource is free and granted to requester */
-#define RESOURCE_OPCODE_GNT 1
-/* resource is busy, param[7:0] indicates owner as follow 0-15 = PF0-15,
- * 16 = MFW, 17 = diag over serial
- */
-#define RESOURCE_OPCODE_BUSY 2
-/* indicate release request was acknowledged */
-#define RESOURCE_OPCODE_RELEASED 3
-/* indicate release request was previously received by other owner */
-#define RESOURCE_OPCODE_RELEASED_PREVIOUS 4
-/* indicate wrong owner during release */
-#define RESOURCE_OPCODE_WRONG_OWNER 5
-#define RESOURCE_OPCODE_UNKNOWN_CMD 255
-/* dedicate resource 0 for dump */
-#define RESOURCE_DUMP (1 << 0)
-
+ /* request resource ownership with default aging */
+ #define RESOURCE_OPCODE_REQ 1
+ /* request resource ownership without aging */
+ #define RESOURCE_OPCODE_REQ_WO_AGING 2
+ /* request resource ownership with specific aging timer (in seconds) */
+ #define RESOURCE_OPCODE_REQ_W_AGING 3
+ #define RESOURCE_OPCODE_RELEASE 4 /* release resource */
+ /* force resource release */
+ #define RESOURCE_OPCODE_FORCE_RELEASE 5
+ /* resource is free and granted to requester */
+ #define RESOURCE_OPCODE_GNT 1
+ /* resource is busy, param[7:0] indicates owner as follow 0-15 = PF0-15,
+ * 16 = MFW, 17 = diag over serial
+ */
+ #define RESOURCE_OPCODE_BUSY 2
+ /* indicate release request was acknowledged */
+ #define RESOURCE_OPCODE_RELEASED 3
+ /* indicate release request was previously received by other owner */
+ #define RESOURCE_OPCODE_RELEASED_PREVIOUS 4
+ /* indicate wrong owner during release */
+ #define RESOURCE_OPCODE_WRONG_OWNER 5
+ #define RESOURCE_OPCODE_UNKNOWN_CMD 255
+ /* dedicate resource 0 for dump */
+ #define RESOURCE_DUMP (1 << 0)
#define DRV_MSG_CODE_GET_MBA_VERSION 0x00240000 /* Get MBA version */
-
/* Send crash dump commands with param[3:0] - opcode */
#define DRV_MSG_CODE_MDUMP_CMD 0x00250000
-#define MDUMP_DRV_PARAM_OPCODE_MASK 0x0000000f
-/* acknowledge reception of error indication */
-#define DRV_MSG_CODE_MDUMP_ACK 0x01
-/* set epoc and personality as follow: drv_data[3:0] - epoch,
- * drv_data[7:4] - personality
- */
-#define DRV_MSG_CODE_MDUMP_SET_VALUES 0x02
-/* trigger crash dump procedure */
-#define DRV_MSG_CODE_MDUMP_TRIGGER 0x03
-/* Request valid logs and config words */
-#define DRV_MSG_CODE_MDUMP_GET_CONFIG 0x04
-/* Set triggers mask. drv_mb_param should indicate (bitwise) which trigger
- * enabled
- */
-#define DRV_MSG_CODE_MDUMP_SET_ENABLE 0x05
-#define DRV_MSG_CODE_MDUMP_CLEAR_LOGS 0x06 /* Clear all logs */
-
-
+ #define MDUMP_DRV_PARAM_OPCODE_MASK 0x0000000f
+ /* acknowledge reception of error indication */
+ #define DRV_MSG_CODE_MDUMP_ACK 0x01
+ /* set epoc and personality as follow: drv_data[3:0] - epoch,
+ * drv_data[7:4] - personality
+ */
+ #define DRV_MSG_CODE_MDUMP_SET_VALUES 0x02
+ /* trigger crash dump procedure */
+ #define DRV_MSG_CODE_MDUMP_TRIGGER 0x03
+ /* Request valid logs and config words */
+ #define DRV_MSG_CODE_MDUMP_GET_CONFIG 0x04
+ /* Set triggers mask. drv_mb_param should indicate (bitwise) which
+ * trigger enabled
+ */
+ #define DRV_MSG_CODE_MDUMP_SET_ENABLE 0x05
+ /* Clear all logs */
+ #define DRV_MSG_CODE_MDUMP_CLEAR_LOGS 0x06
#define DRV_MSG_CODE_MEM_ECC_EVENTS 0x00260000 /* Param: None */
+/* Param: [0:15] - gpio number */
+#define DRV_MSG_CODE_GPIO_INFO 0x00270000
/* Value will be placed in union */
#define DRV_MSG_CODE_EXT_PHY_READ 0x00280000
/* Value should be placed in union */
#define FW_MSG_MODE_PHY_PRIVILEGE_ERROR 0x00150000
#define FW_MSG_CODE_OK 0x00160000
#define FW_MSG_CODE_LED_MODE_INVALID 0x00170000
-#define FW_MSG_CODE_PHY_DIAG_OK 0x00160000
-#define FW_MSG_CODE_PHY_DIAG_ERROR 0x00170000
+#define FW_MSG_CODE_PHY_DIAG_OK 0x00160000
+#define FW_MSG_CODE_PHY_DIAG_ERROR 0x00170000
#define FW_MSG_CODE_INIT_HW_FAILED_TO_ALLOCATE_PAGE 0x00040000
#define FW_MSG_CODE_INIT_HW_FAILED_BAD_STATE 0x00170000
#define FW_MSG_CODE_INIT_HW_FAILED_TO_SET_WINDOW 0x000d0000
#define FW_MSG_CODE_INIT_HW_FAILED_NO_IMAGE 0x000c0000
#define FW_MSG_CODE_INIT_HW_FAILED_VERSION_MISMATCH 0x00100000
-#define FW_MSG_CODE_TRANSCEIVER_DIAG_OK 0x00160000
-#define FW_MSG_CODE_TRANSCEIVER_DIAG_ERROR 0x00170000
+#define FW_MSG_CODE_TRANSCEIVER_DIAG_OK 0x00160000
+#define FW_MSG_CODE_TRANSCEIVER_DIAG_ERROR 0x00170000
#define FW_MSG_CODE_TRANSCEIVER_NOT_PRESENT 0x00020000
-#define FW_MSG_CODE_TRANSCEIVER_BAD_BUFFER_SIZE 0x000f0000
-#define FW_MSG_CODE_GPIO_OK 0x00160000
-#define FW_MSG_CODE_GPIO_DIRECTION_ERR 0x00170000
+#define FW_MSG_CODE_TRANSCEIVER_BAD_BUFFER_SIZE 0x000f0000
+#define FW_MSG_CODE_GPIO_OK 0x00160000
+#define FW_MSG_CODE_GPIO_DIRECTION_ERR 0x00170000
#define FW_MSG_CODE_GPIO_CTRL_ERR 0x00020000
#define FW_MSG_CODE_GPIO_INVALID 0x000f0000
-#define FW_MSG_CODE_GPIO_INVALID_VALUE 0x00050000
+#define FW_MSG_CODE_GPIO_INVALID_VALUE 0x00050000
#define FW_MSG_CODE_BIST_TEST_INVALID 0x000f0000
#define FW_MSG_CODE_EXTPHY_INVALID_IMAGE_HEADER 0x00700000
#define FW_MSG_CODE_EXTPHY_INVALID_PHY_TYPE 0x00710000
git.droids-corp.org / dpdk.git / blobdiff