#define DCBX_ETS_CBS_SHIFT 3
#define DCBX_ETS_MAX_TCS_MASK 0x000000f0
#define DCBX_ETS_MAX_TCS_SHIFT 4
-#define DCBX_ISCSI_OOO_TC_MASK 0x00000f00
-#define DCBX_ISCSI_OOO_TC_SHIFT 8
+#define DCBX_OOO_TC_MASK 0x00000f00
+#define DCBX_OOO_TC_SHIFT 8
/* Entries in tc table are orginized that the left most is pri 0, right most is
* prio 7
*/
u32 pri_tc_tbl[1];
-#define DCBX_ISCSI_OOO_TC (4)
+/* Fixed TCP OOO TC usage is deprecated and used only for driver backward
+ * compatibility
+ */
+#define DCBX_TCP_OOO_TC (4)
+#define DCBX_TCP_OOO_K2_4PORT_TC (3)
-#define NIG_ETS_ISCSI_OOO_CLIENT_OFFSET (DCBX_ISCSI_OOO_TC + 1)
+#define NIG_ETS_ISCSI_OOO_CLIENT_OFFSET (DCBX_TCP_OOO_TC + 1)
#define DCBX_CEE_STRICT_PRIORITY 0xf
/* Entries in tc table are orginized that the left most is pri 0, right most is
* prio 7
u32 link_status;
#define LINK_STATUS_LINK_UP 0x00000001
#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001e
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (1 << 1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (2 << 1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10G (3 << 1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_20G (4 << 1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_40G (5 << 1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_50G (6 << 1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_100G (7 << 1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_25G (8 << 1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (1 << 1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (2 << 1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10G (3 << 1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_20G (4 << 1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_40G (5 << 1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_50G (6 << 1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_100G (7 << 1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_25G (8 << 1)
#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020
#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040
#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080
#define LINK_STATUS_LINK_PARTNER_100G_CAPABLE 0x00008000
#define LINK_STATUS_LINK_PARTNER_25G_CAPABLE 0x00010000
#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000
-#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0 << 18)
-#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1 << 18)
-#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2 << 18)
-#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3 << 18)
+#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0 << 18)
+#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1 << 18)
+#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2 << 18)
+#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3 << 18)
#define LINK_STATUS_SFP_TX_FAULT 0x00100000
#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00200000
#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00400000
#define LINK_STATUS_MAC_REMOTE_FAULT 0x02000000
#define LINK_STATUS_UNSUPPORTED_SPD_REQ 0x04000000
#define LINK_STATUS_FEC_MODE_MASK 0x38000000
-#define LINK_STATUS_FEC_MODE_NONE (0 << 27)
-#define LINK_STATUS_FEC_MODE_FIRECODE_CL74 (1 << 27)
-#define LINK_STATUS_FEC_MODE_RS_CL91 (2 << 27)
+#define LINK_STATUS_FEC_MODE_NONE (0 << 27)
+#define LINK_STATUS_FEC_MODE_FIRECODE_CL74 (1 << 27)
+#define LINK_STATUS_FEC_MODE_RS_CL91 (2 << 27)
#define LINK_STATUS_EXT_PHY_LINK_UP 0x40000000
u32 link_status1;
* When 1'b1 those bits contains a value times 16 microseconds.
*/
u32 eee_status;
- #define EEE_TIMER_MASK 0x000fffff
- #define EEE_ADV_STATUS_MASK 0x00f00000
- #define EEE_1G_ADV (1 << 1)
- #define EEE_10G_ADV (1 << 2)
- #define EEE_ADV_STATUS_SHIFT 20
- #define EEE_LP_ADV_STATUS_MASK 0x0f000000
- #define EEE_LP_ADV_STATUS_SHIFT 24
- #define EEE_REQUESTED_BIT 0x10000000
- #define EEE_LPI_REQUESTED_BIT 0x20000000
- #define EEE_ACTIVE_BIT 0x40000000
- #define EEE_TIME_OUTPUT_BIT 0x80000000
+#define EEE_TIMER_MASK 0x000fffff
+#define EEE_ADV_STATUS_MASK 0x00f00000
+#define EEE_1G_ADV (1 << 1)
+#define EEE_10G_ADV (1 << 2)
+#define EEE_ADV_STATUS_SHIFT 20
+#define EEE_LP_ADV_STATUS_MASK 0x0f000000
+#define EEE_LP_ADV_STATUS_SHIFT 24
+#define EEE_REQUESTED_BIT 0x10000000
+#define EEE_LPI_REQUESTED_BIT 0x20000000
+#define EEE_ACTIVE_BIT 0x40000000
+#define EEE_TIME_OUTPUT_BIT 0x80000000
u32 eee_remote; /* Used for EEE in LLDP */
- #define EEE_REMOTE_TW_TX_MASK 0x0000ffff
- #define EEE_REMOTE_TW_TX_SHIFT 0
- #define EEE_REMOTE_TW_RX_MASK 0xffff0000
- #define EEE_REMOTE_TW_RX_SHIFT 16
+#define EEE_REMOTE_TW_TX_MASK 0x0000ffff
+#define EEE_REMOTE_TW_TX_SHIFT 0
+#define EEE_REMOTE_TW_RX_MASK 0xffff0000
+#define EEE_REMOTE_TW_RX_SHIFT 16
};
/**************************************/
#define DRV_ID_PDA_COMP_VER_MASK 0x0000ffff
#define DRV_ID_PDA_COMP_VER_SHIFT 0
+#define LOAD_REQ_HSI_VERSION 2
#define DRV_ID_MCP_HSI_VER_MASK 0x00ff0000
#define DRV_ID_MCP_HSI_VER_SHIFT 16
-#define DRV_ID_MCP_HSI_VER_CURRENT (1 << DRV_ID_MCP_HSI_VER_SHIFT)
+#define DRV_ID_MCP_HSI_VER_CURRENT (LOAD_REQ_HSI_VERSION << \
+ DRV_ID_MCP_HSI_VER_SHIFT)
#define DRV_ID_DRV_TYPE_MASK 0x7f000000
#define DRV_ID_DRV_TYPE_SHIFT 24
RESOURCE_NUM_RSS_ENGINES_E = 14,
RESOURCE_LL2_QUEUE_E = 15,
RESOURCE_RDMA_STATS_QUEUE_E = 16,
+ RESOURCE_BDQ_E = 17,
RESOURCE_MAX_NUM,
RESOURCE_NUM_INVALID = 0xFFFFFFFF
};
#define RESOURCE_ELEMENT_STRICT (1 << 0)
};
+#define DRV_ROLE_NONE 0
+#define DRV_ROLE_PREBOOT 1
+#define DRV_ROLE_OS 2
+#define DRV_ROLE_KDUMP 3
+
+struct load_req_stc {
+ u32 drv_ver_0;
+ u32 drv_ver_1;
+ u32 fw_ver;
+ u32 misc0;
+#define LOAD_REQ_ROLE_MASK 0x000000FF
+#define LOAD_REQ_ROLE_SHIFT 0
+#define LOAD_REQ_LOCK_TO_MASK 0x0000FF00
+#define LOAD_REQ_LOCK_TO_SHIFT 0 /* @DPDK */
+#define LOAD_REQ_LOCK_TO_DEFAULT 0
+#define LOAD_REQ_LOCK_TO_NONE 255
+#define LOAD_REQ_FORCE_MASK 0x000F0000
+#define LOAD_REQ_FORCE_SHIFT 0 /* @DPDK */
+#define LOAD_REQ_FORCE_NONE 0
+#define LOAD_REQ_FORCE_PF 1
+#define LOAD_REQ_FORCE_ALL 2
+#define LOAD_REQ_FLAGS0_MASK 0x00F00000
+#define LOAD_REQ_FLAGS0_SHIFT 0 /* @DPDK */
+#define LOAD_REQ_FLAGS0_AVOID_RESET (0x1 << 0)
+};
+
+struct load_rsp_stc {
+ u32 drv_ver_0;
+ u32 drv_ver_1;
+ u32 fw_ver;
+ u32 misc0;
+#define LOAD_RSP_ROLE_MASK 0x000000FF
+#define LOAD_RSP_ROLE_SHIFT 0
+#define LOAD_RSP_HSI_MASK 0x0000FF00
+#define LOAD_RSP_HSI_SHIFT 8
+#define LOAD_RSP_FLAGS0_MASK 0x000F0000
+#define LOAD_RSP_FLAGS0_SHIFT 16
+#define LOAD_RSP_FLAGS0_DRV_EXISTS (0x1 << 0)
+};
+
union drv_union_data {
- u32 ver_str[MCP_DRV_VER_STR_SIZE_DWORD]; /* LOAD_REQ */
struct mcp_mac wol_mac; /* UNLOAD_DONE */
/* This configuration should be set by the driver for the LINK_SET command. */
struct bist_nvm_image_att nvm_image_att;
struct mdump_config_stc mdump_config;
u32 dword;
+
+ struct load_req_stc load_req;
+ struct load_rsp_stc load_rsp;
/* ... */
};
#define DRV_MSG_CODE_LOAD_REQ 0x10000000
#define DRV_MSG_CODE_LOAD_DONE 0x11000000
#define DRV_MSG_CODE_INIT_HW 0x12000000
+#define DRV_MSG_CODE_CANCEL_LOAD_REQ 0x13000000
#define DRV_MSG_CODE_UNLOAD_REQ 0x20000000
#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000
#define DRV_MSG_CODE_INIT_PHY 0x22000000
#define DRV_MSG_CODE_OV_UPDATE_BUS_NUM 0x27000000
#define DRV_MSG_CODE_OV_UPDATE_BOOT_PROGRESS 0x28000000
#define DRV_MSG_CODE_OV_UPDATE_STORM_FW_VER 0x29000000
+#define DRV_MSG_CODE_NIG_DRAIN 0x30000000
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE 0x31000000
#define DRV_MSG_CODE_BW_UPDATE_ACK 0x32000000
#define DRV_MSG_CODE_OV_UPDATE_MTU 0x33000000
-
-#define DRV_MSG_CODE_NIG_DRAIN 0x30000000
-
/* DRV_MB Param: driver version supp, FW_MB param: MFW version supp,
* data: struct resource_info
*/
#define DRV_MSG_GET_RESOURCE_ALLOC_MSG 0x34000000
+#define DRV_MSG_SET_RESOURCE_VALUE_MSG 0x35000000
/*deprecated don't use*/
#define DRV_MSG_CODE_INITIATE_FLR_DEPRECATED 0x02000000
* [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
*/
#define DRV_MSG_CODE_GET_VMAC 0x00120000
- #define DRV_MSG_CODE_VMAC_TYPE_MAC 1
- #define DRV_MSG_CODE_VMAC_TYPE_WWNN 2
- #define DRV_MSG_CODE_VMAC_TYPE_WWPN 3
+#define DRV_MSG_CODE_VMAC_TYPE_SHIFT 4
+#define DRV_MSG_CODE_VMAC_TYPE_MASK 0x30
+#define DRV_MSG_CODE_VMAC_TYPE_MAC 1
+#define DRV_MSG_CODE_VMAC_TYPE_WWNN 2
+#define DRV_MSG_CODE_VMAC_TYPE_WWPN 3
/* Get statistics from pf, params [31:4] - reserved, [3:0] - stats type */
#define DRV_MSG_CODE_GET_STATS 0x00130000
- #define DRV_MSG_CODE_STATS_TYPE_LAN 1
- #define DRV_MSG_CODE_STATS_TYPE_FCOE 2
- #define DRV_MSG_CODE_STATS_TYPE_ISCSI 3
- #define DRV_MSG_CODE_STATS_TYPE_RDMA 4
+#define DRV_MSG_CODE_STATS_TYPE_LAN 1
+#define DRV_MSG_CODE_STATS_TYPE_FCOE 2
+#define DRV_MSG_CODE_STATS_TYPE_ISCSI 3
+#define DRV_MSG_CODE_STATS_TYPE_RDMA 4
/* Host shall provide buffer and size for MFW */
#define DRV_MSG_CODE_PMD_DIAG_DUMP 0x00140000
/* Host shall provide buffer and size for MFW */
#define DRV_MSG_CODE_MASK_PARITIES 0x001a0000
/* param[0] - Simulate fan failure, param[1] - simulate over temp. */
#define DRV_MSG_CODE_INDUCE_FAILURE 0x001b0000
- #define DRV_MSG_FAN_FAILURE_TYPE (1 << 0)
- #define DRV_MSG_TEMPERATURE_FAILURE_TYPE (1 << 1)
+#define DRV_MSG_FAN_FAILURE_TYPE (1 << 0)
+#define DRV_MSG_TEMPERATURE_FAILURE_TYPE (1 << 1)
/* Param: [0:15] - gpio number */
#define DRV_MSG_CODE_GPIO_READ 0x001c0000
/* Param: [0:15] - gpio number, [16:31] - gpio value */
#define DRV_MSG_CODE_TIMESTAMP 0x00210000
/* This is an empty mailbox just return OK*/
#define DRV_MSG_CODE_EMPTY_MB 0x00220000
+
/* Param[0:4] - resource number (0-31), Param[5:7] - opcode,
* param[15:8] - age
*/
#define DRV_MSG_CODE_RESOURCE_CMD 0x00230000
- /* request resource ownership with default aging */
- #define RESOURCE_OPCODE_REQ 1
- /* request resource ownership without aging */
- #define RESOURCE_OPCODE_REQ_WO_AGING 2
- /* request resource ownership with specific aging timer (in seconds) */
- #define RESOURCE_OPCODE_REQ_W_AGING 3
- #define RESOURCE_OPCODE_RELEASE 4 /* release resource */
- /* force resource release */
- #define RESOURCE_OPCODE_FORCE_RELEASE 5
- /* resource is free and granted to requester */
- #define RESOURCE_OPCODE_GNT 1
- /* resource is busy, param[7:0] indicates owner as follow 0-15 = PF0-15,
- * 16 = MFW, 17 = diag over serial
- */
- #define RESOURCE_OPCODE_BUSY 2
- /* indicate release request was acknowledged */
- #define RESOURCE_OPCODE_RELEASED 3
- /* indicate release request was previously received by other owner */
- #define RESOURCE_OPCODE_RELEASED_PREVIOUS 4
- /* indicate wrong owner during release */
- #define RESOURCE_OPCODE_WRONG_OWNER 5
- #define RESOURCE_OPCODE_UNKNOWN_CMD 255
- /* dedicate resource 0 for dump */
- #define RESOURCE_DUMP 0
+
+#define RESOURCE_CMD_REQ_RESC_MASK 0x0000001F
+#define RESOURCE_CMD_REQ_RESC_SHIFT 0
+#define RESOURCE_CMD_REQ_OPCODE_MASK 0x000000E0
+#define RESOURCE_CMD_REQ_OPCODE_SHIFT 5
+/* request resource ownership with default aging */
+#define RESOURCE_OPCODE_REQ 1
+/* request resource ownership without aging */
+#define RESOURCE_OPCODE_REQ_WO_AGING 2
+/* request resource ownership with specific aging timer (in seconds) */
+#define RESOURCE_OPCODE_REQ_W_AGING 3
+#define RESOURCE_OPCODE_RELEASE 4 /* release resource */
+/* force resource release */
+#define RESOURCE_OPCODE_FORCE_RELEASE 5
+#define RESOURCE_CMD_REQ_AGE_MASK 0x0000FF00
+#define RESOURCE_CMD_REQ_AGE_SHIFT 8
+
+#define RESOURCE_CMD_RSP_OWNER_MASK 0x000000FF
+#define RESOURCE_CMD_RSP_OWNER_SHIFT 0
+#define RESOURCE_CMD_RSP_OPCODE_MASK 0x00000700
+#define RESOURCE_CMD_RSP_OPCODE_SHIFT 8
+/* resource is free and granted to requester */
+#define RESOURCE_OPCODE_GNT 1
+/* resource is busy, param[7:0] indicates owner as follow 0-15 = PF0-15,
+ * 16 = MFW, 17 = diag over serial
+ */
+#define RESOURCE_OPCODE_BUSY 2
+/* indicate release request was acknowledged */
+#define RESOURCE_OPCODE_RELEASED 3
+/* indicate release request was previously received by other owner */
+#define RESOURCE_OPCODE_RELEASED_PREVIOUS 4
+/* indicate wrong owner during release */
+#define RESOURCE_OPCODE_WRONG_OWNER 5
+#define RESOURCE_OPCODE_UNKNOWN_CMD 255
+
+/* dedicate resource 0 for dump */
+#define RESOURCE_DUMP 0
+
#define DRV_MSG_CODE_GET_MBA_VERSION 0x00240000 /* Get MBA version */
/* Send crash dump commands with param[3:0] - opcode */
#define DRV_MSG_CODE_MDUMP_CMD 0x00250000
- #define MDUMP_DRV_PARAM_OPCODE_MASK 0x0000000f
- /* acknowledge reception of error indication */
- #define DRV_MSG_CODE_MDUMP_ACK 0x01
- /* set epoc and personality as follow: drv_data[3:0] - epoch,
- * drv_data[7:4] - personality
- */
- #define DRV_MSG_CODE_MDUMP_SET_VALUES 0x02
- /* trigger crash dump procedure */
- #define DRV_MSG_CODE_MDUMP_TRIGGER 0x03
- /* Request valid logs and config words */
- #define DRV_MSG_CODE_MDUMP_GET_CONFIG 0x04
- /* Set triggers mask. drv_mb_param should indicate (bitwise) which
- * trigger enabled
- */
- #define DRV_MSG_CODE_MDUMP_SET_ENABLE 0x05
- /* Clear all logs */
- #define DRV_MSG_CODE_MDUMP_CLEAR_LOGS 0x06
+#define MDUMP_DRV_PARAM_OPCODE_MASK 0x0000000f
+/* acknowledge reception of error indication */
+#define DRV_MSG_CODE_MDUMP_ACK 0x01
+/* set epoc and personality as follow: drv_data[3:0] - epoch,
+ * drv_data[7:4] - personality
+ */
+#define DRV_MSG_CODE_MDUMP_SET_VALUES 0x02
+/* trigger crash dump procedure */
+#define DRV_MSG_CODE_MDUMP_TRIGGER 0x03
+/* Request valid logs and config words */
+#define DRV_MSG_CODE_MDUMP_GET_CONFIG 0x04
+/* Set triggers mask. drv_mb_param should indicate (bitwise) which
+ * trigger enabled
+ */
+#define DRV_MSG_CODE_MDUMP_SET_ENABLE 0x05
+/* Clear all logs */
+#define DRV_MSG_CODE_MDUMP_CLEAR_LOGS 0x06
#define DRV_MSG_CODE_MEM_ECC_EVENTS 0x00260000 /* Param: None */
/* Param: [0:15] - gpio number */
#define DRV_MSG_CODE_GPIO_INFO 0x00270000
#define DRV_MSG_CODE_EXT_PHY_READ 0x00280000
/* Value should be placed in union */
#define DRV_MSG_CODE_EXT_PHY_WRITE 0x00290000
- #define DRV_MB_PARAM_ADDR_SHIFT 0
- #define DRV_MB_PARAM_ADDR_MASK 0x0000FFFF
- #define DRV_MB_PARAM_DEVAD_SHIFT 16
- #define DRV_MB_PARAM_DEVAD_MASK 0x001F0000
- #define DRV_MB_PARAM_PORT_SHIFT 21
- #define DRV_MB_PARAM_PORT_MASK 0x00600000
+#define DRV_MB_PARAM_ADDR_SHIFT 0
+#define DRV_MB_PARAM_ADDR_MASK 0x0000FFFF
+#define DRV_MB_PARAM_DEVAD_SHIFT 16
+#define DRV_MB_PARAM_DEVAD_MASK 0x001F0000
+#define DRV_MB_PARAM_PORT_SHIFT 21
+#define DRV_MB_PARAM_PORT_MASK 0x00600000
#define DRV_MSG_CODE_EXT_PHY_FW_UPGRADE 0x002a0000
#define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff
u32 fw_mb_header;
#define FW_MSG_CODE_MASK 0xffff0000
+#define FW_MSG_CODE_UNSUPPORTED 0x00000000
#define FW_MSG_CODE_DRV_LOAD_ENGINE 0x10100000
#define FW_MSG_CODE_DRV_LOAD_PORT 0x10110000
#define FW_MSG_CODE_DRV_LOAD_FUNCTION 0x10120000
#define FW_MSG_CODE_DRV_LOAD_REFUSED_PDA 0x10200000
-#define FW_MSG_CODE_DRV_LOAD_REFUSED_HSI 0x10210000
+#define FW_MSG_CODE_DRV_LOAD_REFUSED_HSI_1 0x10210000
#define FW_MSG_CODE_DRV_LOAD_REFUSED_DIAG 0x10220000
+#define FW_MSG_CODE_DRV_LOAD_REFUSED_HSI 0x10230000
+#define FW_MSG_CODE_DRV_LOAD_REFUSED_REQUIRES_FORCE 0x10300000
+#define FW_MSG_CODE_DRV_LOAD_REFUSED_REJECT 0x10310000
#define FW_MSG_CODE_DRV_LOAD_DONE 0x11100000
#define FW_MSG_CODE_DRV_UNLOAD_ENGINE 0x20110000
#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x20120000
#define FW_MSG_CODE_NVM_PUT_FILE_FINISH_OK 0x00400000
/* MFW reject "mcp reset" command if one of the drivers is up */
#define FW_MSG_CODE_MCP_RESET_REJECT 0x00600000
+#define FW_MSG_CODE_NVM_FAILED_CALC_HASH 0x00310000
+#define FW_MSG_CODE_NVM_PUBLIC_KEY_MISSING 0x00320000
+#define FW_MSG_CODE_NVM_INVALID_PUBLIC_KEY 0x00330000
+
#define FW_MSG_CODE_PHY_OK 0x00110000
#define FW_MSG_CODE_PHY_ERROR 0x00120000
#define FW_MSG_CODE_SET_SECURE_MODE_ERROR 0x00130000
#define FW_MSG_CODE_EXTPHY_INVALID_PHY_TYPE 0x00710000
#define FW_MSG_CODE_EXTPHY_OPERATION_FAILED 0x00720000
#define FW_MSG_CODE_EXTPHY_NO_PHY_DETECTED 0x00730000
+#define FW_MSG_CODE_RECOVERY_MODE 0x00740000
-/* mdump related response codes */
+ /* mdump related response codes */
#define FW_MSG_CODE_MDUMP_NO_IMAGE_FOUND 0x00010000
#define FW_MSG_CODE_MDUMP_ALLOC_FAILED 0x00020000
#define FW_MSG_CODE_MDUMP_INVALID_CMD 0x00030000
u32 fw_mb_param;
- /* Resource Allocation params - MFW version support*/
+/* Resource Allocation params - MFW version support */
#define FW_MB_PARAM_RESOURCE_ALLOC_VERSION_MAJOR_MASK 0xFFFF0000
#define FW_MB_PARAM_RESOURCE_ALLOC_VERSION_MAJOR_SHIFT 16
#define FW_MB_PARAM_RESOURCE_ALLOC_VERSION_MINOR_MASK 0x0000FFFF
git.droids-corp.org / dpdk.git / blobdiff