net/bonding: use non deprecated PCI API
[dpdk.git] / drivers / net / sfc / base / medford2_nic.c
index 0989b93..c0d4c13 100644 (file)
@@ -15,25 +15,15 @@ medford2_nic_get_required_pcie_bandwidth(
        __in            efx_nic_t *enp,
        __out           uint32_t *bandwidth_mbpsp)
 {
-       uint32_t port_modes;
-       uint32_t current_mode;
        uint32_t bandwidth;
        efx_rc_t rc;
 
        /* FIXME: support new Medford2 dynamic port modes */
 
-       if ((rc = efx_mcdi_get_port_modes(enp, &port_modes,
-                                   &current_mode)) != 0) {
-               /* No port mode info available. */
-               bandwidth = 0;
-               goto out;
-       }
-
-       if ((rc = ef10_nic_get_port_mode_bandwidth(current_mode,
+       if ((rc = ef10_nic_get_port_mode_bandwidth(enp,
                                                    &bandwidth)) != 0)
                goto fail1;
 
-out:
        *bandwidth_mbpsp = bandwidth;
 
        return (0);
@@ -49,82 +39,11 @@ medford2_board_cfg(
        __in            efx_nic_t *enp)
 {
        efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
-       uint8_t mac_addr[6] = { 0 };
-       uint32_t board_type = 0;
-       ef10_link_state_t els;
-       efx_port_t *epp = &(enp->en_port);
-       uint32_t mask;
        uint32_t sysclk, dpcpu_clk;
-       uint32_t base, nvec;
        uint32_t end_padding;
        uint32_t bandwidth;
-       uint32_t vi_window_shift;
        efx_rc_t rc;
 
-       /*
-        * FIXME: Likely to be incomplete and incorrect.
-        * Parts of this should be shared with Huntington.
-        */
-
-       /* Medford2 has a variable VI window size (8K, 16K or 64K) */
-       if ((rc = ef10_get_vi_window_shift(enp, &vi_window_shift)) != 0)
-               goto fail1;
-
-       EFSYS_ASSERT3U(vi_window_shift, <=, EFX_VI_WINDOW_SHIFT_64K);
-       encp->enc_vi_window_shift = vi_window_shift;
-
-
-       /* MAC address for this function */
-       if (EFX_PCI_FUNCTION_IS_PF(encp)) {
-               rc = efx_mcdi_get_mac_address_pf(enp, mac_addr);
-#if EFSYS_OPT_ALLOW_UNCONFIGURED_NIC
-               /*
-                * Disable static config checking for Medford NICs, ONLY
-                * for manufacturing test and setup at the factory, to
-                * allow the static config to be installed.
-                */
-#else /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
-               if ((rc == 0) && (mac_addr[0] & 0x02)) {
-                       /*
-                        * If the static config does not include a global MAC
-                        * address pool then the board may return a locally
-                        * administered MAC address (this should only happen on
-                        * incorrectly programmed boards).
-                        */
-                       rc = EINVAL;
-               }
-#endif /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
-       } else {
-               rc = efx_mcdi_get_mac_address_vf(enp, mac_addr);
-       }
-       if (rc != 0)
-               goto fail2;
-
-       EFX_MAC_ADDR_COPY(encp->enc_mac_addr, mac_addr);
-
-       /* Board configuration */
-       rc = efx_mcdi_get_board_cfg(enp, &board_type, NULL, NULL);
-       if (rc != 0) {
-               /* Unprivileged functions may not be able to read board cfg */
-               if (rc == EACCES)
-                       board_type = 0;
-               else
-                       goto fail3;
-       }
-
-       encp->enc_board_type = board_type;
-       encp->enc_clk_mult = 1; /* not used for Medford2 */
-
-       /* Fill out fields in enp->en_port and enp->en_nic_cfg from MCDI */
-       if ((rc = efx_mcdi_get_phy_cfg(enp)) != 0)
-               goto fail4;
-
-       /* Obtain the default PHY advertised capabilities */
-       if ((rc = ef10_phy_get_link(enp, &els)) != 0)
-               goto fail5;
-       epp->ep_default_adv_cap_mask = els.els_adv_cap_mask;
-       epp->ep_adv_cap_mask = els.els_adv_cap_mask;
-
        /*
         * Enable firmware workarounds for hardware errata.
         * Expected responses are:
@@ -150,9 +69,6 @@ medford2_board_cfg(
                encp->enc_bug41750_workaround = B_TRUE;
        }
 
-       /* Chained multicast is always enabled on Medford2 */
-       encp->enc_bug26807_workaround = B_TRUE;
-
        /*
         * If the bug61265 workaround is enabled, then interrupt holdoff timers
         * cannot be controlled by timer table writes, so MCDI must be used
@@ -165,11 +81,14 @@ medford2_board_cfg(
        else if ((rc == ENOTSUP) || (rc == ENOENT))
                encp->enc_bug61265_workaround = B_FALSE;
        else
-               goto fail6;
+               goto fail1;
+
+       /* Checksums for TSO sends should always be correct on Medford2. */
+       encp->enc_bug61297_workaround = B_FALSE;
 
        /* Get clock frequencies (in MHz). */
        if ((rc = efx_mcdi_get_clock(enp, &sysclk, &dpcpu_clk)) != 0)
-               goto fail7;
+               goto fail2;
 
        /*
         * The Medford2 timer quantum is 1536 dpcpu_clk cycles, documented for
@@ -179,9 +98,9 @@ medford2_board_cfg(
        encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
                    FRF_CZ_TC_TIMER_VAL_WIDTH) / 1000;
 
-       /* Check capabilities of running datapath firmware */
-       if ((rc = ef10_get_datapath_caps(enp)) != 0)
-               goto fail8;
+       encp->enc_ev_desc_size = EF10_EVQ_DESC_SIZE;
+       encp->enc_rx_desc_size = EF10_RXQ_DESC_SIZE;
+       encp->enc_tx_desc_size = EF10_TXQ_DESC_SIZE;
 
        /* Alignment for receive packet DMA buffers */
        encp->enc_rx_buf_align_start = 1;
@@ -189,79 +108,32 @@ medford2_board_cfg(
        /* Get the RX DMA end padding alignment configuration */
        if ((rc = efx_mcdi_get_rxdp_config(enp, &end_padding)) != 0) {
                if (rc != EACCES)
-                       goto fail9;
+                       goto fail3;
 
                /* Assume largest tail padding size supported by hardware */
                end_padding = 256;
        }
        encp->enc_rx_buf_align_end = end_padding;
 
-       /* Alignment for WPTR updates */
-       encp->enc_rx_push_align = EF10_RX_WPTR_ALIGN;
+       encp->enc_evq_max_nevs = EF10_EVQ_MAXNEVS;
+       encp->enc_evq_min_nevs = EF10_EVQ_MINNEVS;
 
-       /*
-        * Maximum number of exclusive RSS contexts which can be allocated. The
-        * hardware supports 64, but 6 are reserved for shared contexts. They
-        * are a global resource so not all may be available.
-        */
-       encp->enc_rx_scale_max_exclusive_contexts = 58;
-
-       encp->enc_tx_dma_desc_size_max = EFX_MASK32(ESF_DZ_RX_KER_BYTE_CNT);
-       /* No boundary crossing limits */
-       encp->enc_tx_dma_desc_boundary = 0;
-
-       /*
-        * Set resource limits for MC_CMD_ALLOC_VIS. Note that we cannot use
-        * MC_CMD_GET_RESOURCE_LIMITS here as that reports the available
-        * resources (allocated to this PCIe function), which is zero until
-        * after we have allocated VIs.
-        */
-       encp->enc_evq_limit = 1024;
-       encp->enc_rxq_limit = EFX_RXQ_LIMIT_TARGET;
-       encp->enc_txq_limit = EFX_TXQ_LIMIT_TARGET;
+       encp->enc_rxq_max_ndescs = EF10_RXQ_MAXNDESCS;
+       encp->enc_rxq_min_ndescs = EF10_RXQ_MINNDESCS;
 
        /*
         * The maximum supported transmit queue size is 2048. TXQs with 4096
         * descriptors are not supported as the top bit is used for vfifo
         * stuffing.
         */
-       encp->enc_txq_max_ndescs = 2048;
-
-       encp->enc_buftbl_limit = 0xFFFFFFFF;
+       encp->enc_txq_max_ndescs = MEDFORD2_TXQ_MAXNDESCS;
+       encp->enc_txq_min_ndescs = EF10_TXQ_MINNDESCS;
 
        EFX_STATIC_ASSERT(MEDFORD2_PIOBUF_NBUFS <= EF10_MAX_PIOBUF_NBUFS);
        encp->enc_piobuf_limit = MEDFORD2_PIOBUF_NBUFS;
        encp->enc_piobuf_size = MEDFORD2_PIOBUF_SIZE;
        encp->enc_piobuf_min_alloc_size = MEDFORD2_MIN_PIO_ALLOC_SIZE;
 
-       /*
-        * Get the current privilege mask. Note that this may be modified
-        * dynamically, so this value is informational only. DO NOT use
-        * the privilege mask to check for sufficient privileges, as that
-        * can result in time-of-check/time-of-use bugs.
-        */
-       if ((rc = ef10_get_privilege_mask(enp, &mask)) != 0)
-               goto fail10;
-       encp->enc_privilege_mask = mask;
-
-       /* Get interrupt vector limits */
-       if ((rc = efx_mcdi_get_vector_cfg(enp, &base, &nvec, NULL)) != 0) {
-               if (EFX_PCI_FUNCTION_IS_PF(encp))
-                       goto fail11;
-
-               /* Ignore error (cannot query vector limits from a VF). */
-               base = 0;
-               nvec = 1024;
-       }
-       encp->enc_intr_vec_base = base;
-       encp->enc_intr_limit = nvec;
-
-       /*
-        * Maximum number of bytes into the frame the TCP header can start for
-        * firmware assisted TSO to work.
-        */
-       encp->enc_tx_tso_tcp_header_offset_limit = EF10_TCP_HEADER_OFFSET_LIMIT;
-
        /*
         * Medford2 stores a single global copy of VPD, not per-PF as on
         * Huntington.
@@ -270,28 +142,12 @@ medford2_board_cfg(
 
        rc = medford2_nic_get_required_pcie_bandwidth(enp, &bandwidth);
        if (rc != 0)
-               goto fail12;
+               goto fail4;
        encp->enc_required_pcie_bandwidth_mbps = bandwidth;
        encp->enc_max_pcie_link_gen = EFX_PCIE_LINK_SPEED_GEN3;
 
        return (0);
 
-fail12:
-       EFSYS_PROBE(fail12);
-fail11:
-       EFSYS_PROBE(fail11);
-fail10:
-       EFSYS_PROBE(fail10);
-fail9:
-       EFSYS_PROBE(fail9);
-fail8:
-       EFSYS_PROBE(fail8);
-fail7:
-       EFSYS_PROBE(fail7);
-fail6:
-       EFSYS_PROBE(fail6);
-fail5:
-       EFSYS_PROBE(fail5);
 fail4:
        EFSYS_PROBE(fail4);
 fail3: