eal: clean up interrupt handle
[dpdk.git] / drivers / net / virtio / virtio_ethdev.c
index d580257..78cb3e8 100644 (file)
@@ -630,7 +630,7 @@ virtio_dev_promiscuous_enable(struct rte_eth_dev *dev)
        int ret;
 
        if (!vtpci_with_feature(hw, VIRTIO_NET_F_CTRL_RX)) {
-               PMD_INIT_LOG(INFO, "host does not support rx control\n");
+               PMD_INIT_LOG(INFO, "host does not support rx control");
                return;
        }
 
@@ -653,7 +653,7 @@ virtio_dev_promiscuous_disable(struct rte_eth_dev *dev)
        int ret;
 
        if (!vtpci_with_feature(hw, VIRTIO_NET_F_CTRL_RX)) {
-               PMD_INIT_LOG(INFO, "host does not support rx control\n");
+               PMD_INIT_LOG(INFO, "host does not support rx control");
                return;
        }
 
@@ -676,7 +676,7 @@ virtio_dev_allmulticast_enable(struct rte_eth_dev *dev)
        int ret;
 
        if (!vtpci_with_feature(hw, VIRTIO_NET_F_CTRL_RX)) {
-               PMD_INIT_LOG(INFO, "host does not support rx control\n");
+               PMD_INIT_LOG(INFO, "host does not support rx control");
                return;
        }
 
@@ -699,7 +699,7 @@ virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
        int ret;
 
        if (!vtpci_with_feature(hw, VIRTIO_NET_F_CTRL_RX)) {
-               PMD_INIT_LOG(INFO, "host does not support rx control\n");
+               PMD_INIT_LOG(INFO, "host does not support rx control");
                return;
        }
 
@@ -721,10 +721,13 @@ virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
        uint32_t ether_hdr_len = ETHER_HDR_LEN + VLAN_TAG_LEN +
                                 hw->vtnet_hdr_size;
        uint32_t frame_size = mtu + ether_hdr_len;
+       uint32_t max_frame_size = hw->max_mtu + ether_hdr_len;
 
-       if (mtu < ETHER_MIN_MTU || frame_size > VIRTIO_MAX_RX_PKTLEN) {
-               PMD_INIT_LOG(ERR, "MTU should be between %d and %d\n",
-                       ETHER_MIN_MTU, VIRTIO_MAX_RX_PKTLEN - ether_hdr_len);
+       max_frame_size = RTE_MIN(max_frame_size, VIRTIO_MAX_RX_PKTLEN);
+
+       if (mtu < ETHER_MIN_MTU || frame_size > max_frame_size) {
+               PMD_INIT_LOG(ERR, "MTU should be between %d and %d",
+                       ETHER_MIN_MTU, max_frame_size - ether_hdr_len);
                return -EINVAL;
        }
        return 0;
@@ -1158,6 +1161,18 @@ virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
        PMD_INIT_LOG(DEBUG, "host_features before negotiate = %" PRIx64,
                host_features);
 
+       /* If supported, ensure MTU value is valid before acknowledging it. */
+       if (host_features & req_features & (1ULL << VIRTIO_NET_F_MTU)) {
+               struct virtio_net_config config;
+
+               vtpci_read_dev_config(hw,
+                       offsetof(struct virtio_net_config, mtu),
+                       &config.mtu, sizeof(config.mtu));
+
+               if (config.mtu < ETHER_MIN_MTU)
+                       req_features &= ~(1ULL << VIRTIO_NET_F_MTU);
+       }
+
        /*
         * Negotiate features: Subset of device feature bits are written back
         * guest feature bits.
@@ -1190,9 +1205,8 @@ virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
  * Process Virtio Config changed interrupt and call the callback
  * if link state changed.
  */
-static void
-virtio_interrupt_handler(struct rte_intr_handle *handle,
-                        void *param)
+void
+virtio_interrupt_handler(void *param)
 {
        struct rte_eth_dev *dev = param;
        struct virtio_hw *hw = dev->data->dev_private;
@@ -1202,7 +1216,7 @@ virtio_interrupt_handler(struct rte_intr_handle *handle,
        isr = vtpci_isr(hw);
        PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
 
-       if (rte_intr_enable(handle) < 0)
+       if (rte_intr_enable(dev->intr_handle) < 0)
                PMD_DRV_LOG(ERR, "interrupt enable failed");
 
        if (isr & VIRTIO_PCI_ISR_CONFIG) {
@@ -1233,7 +1247,7 @@ virtio_queues_bind_intr(struct rte_eth_dev *dev)
        uint32_t i;
        struct virtio_hw *hw = dev->data->dev_private;
 
-       PMD_INIT_LOG(INFO, "queue/interrupt binding\n");
+       PMD_INIT_LOG(INFO, "queue/interrupt binding");
        for (i = 0; i < dev->data->nb_rx_queues; ++i) {
                dev->intr_handle->intr_vec[i] = i + 1;
                if (VTPCI_OPS(hw)->set_queue_irq(hw, hw->vqs[i * 2], i + 1) ==
@@ -1252,7 +1266,7 @@ virtio_queues_unbind_intr(struct rte_eth_dev *dev)
        uint32_t i;
        struct virtio_hw *hw = dev->data->dev_private;
 
-       PMD_INIT_LOG(INFO, "queue/interrupt unbinding\n");
+       PMD_INIT_LOG(INFO, "queue/interrupt unbinding");
        for (i = 0; i < dev->data->nb_rx_queues; ++i)
                VTPCI_OPS(hw)->set_queue_irq(hw,
                                             hw->vqs[i * VTNET_CQ],
@@ -1338,11 +1352,11 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
                rte_eth_copy_pci_info(eth_dev, pci_dev);
        }
 
-       /* If host does not support status then disable LSC */
-       if (!vtpci_with_feature(hw, VIRTIO_NET_F_STATUS))
-               eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
-       else
+       /* If host does not support both status and MSI-X then disable LSC */
+       if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw->use_msix)
                eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
+       else
+               eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
 
        rx_func_get(eth_dev);
 
@@ -1392,6 +1406,32 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
 
                hw->max_queue_pairs = config->max_virtqueue_pairs;
 
+               if (vtpci_with_feature(hw, VIRTIO_NET_F_MTU)) {
+                       vtpci_read_dev_config(hw,
+                               offsetof(struct virtio_net_config, mtu),
+                               &config->mtu,
+                               sizeof(config->mtu));
+
+                       /*
+                        * MTU value has already been checked at negotiation
+                        * time, but check again in case it has changed since
+                        * then, which should not happen.
+                        */
+                       if (config->mtu < ETHER_MIN_MTU) {
+                               PMD_INIT_LOG(ERR, "invalid max MTU value (%u)",
+                                               config->mtu);
+                               return -1;
+                       }
+
+                       hw->max_mtu = config->mtu;
+                       /* Set initial MTU to maximum one supported by vhost */
+                       eth_dev->data->mtu = config->mtu;
+
+               } else {
+                       hw->max_mtu = VIRTIO_MAX_RX_PKTLEN - ETHER_HDR_LEN -
+                               VLAN_TAG_LEN - hw->vtnet_hdr_size;
+               }
+
                PMD_INIT_LOG(DEBUG, "config->max_virtqueue_pairs=%d",
                                config->max_virtqueue_pairs);
                PMD_INIT_LOG(DEBUG, "config->status=%d", config->status);
@@ -1461,9 +1501,12 @@ virtio_remap_pci(struct rte_pci_device *pci_dev, struct virtio_hw *hw)
 static void
 virtio_set_vtpci_ops(struct virtio_hw *hw)
 {
+#ifdef RTE_VIRTIO_USER
        if (hw->virtio_user_dev)
                VTPCI_OPS(hw) = &virtio_user_ops;
-       else if (hw->modern)
+       else
+#endif
+       if (hw->modern)
                VTPCI_OPS(hw) = &modern_ops;
        else
                VTPCI_OPS(hw) = &legacy_ops;
@@ -1512,6 +1555,7 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
                return -ENOMEM;
        }
 
+       hw->port_id = eth_dev->data->port_id;
        /* For virtio_user case the hw->virtio_user_dev is populated by
         * virtio_user_eth_dev_alloc() before eth_virtio_dev_init() is called.
         */
@@ -1522,7 +1566,6 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
                        return ret;
        }
 
-       hw->port_id = eth_dev->data->port_id;
        eth_dev->data->dev_flags = dev_flags;
 
        /* reset device and negotiate default features */
@@ -1829,9 +1872,11 @@ virtio_dev_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complet
 static void
 virtio_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
 {
-       uint64_t tso_mask;
+       uint64_t tso_mask, host_features;
        struct virtio_hw *hw = dev->data->dev_private;
 
+       dev_info->speed_capa = ETH_LINK_SPEED_10G; /* fake value */
+
        dev_info->pci_dev = dev->device ? RTE_DEV_TO_PCI(dev->device) : NULL;
        dev_info->max_rx_queues =
                RTE_MIN(hw->max_queue_pairs, VIRTIO_MAX_RX_QUEUES);
@@ -1843,18 +1888,25 @@ virtio_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
        dev_info->default_txconf = (struct rte_eth_txconf) {
                .txq_flags = ETH_TXQ_FLAGS_NOOFFLOADS
        };
-       dev_info->rx_offload_capa =
-               DEV_RX_OFFLOAD_TCP_CKSUM |
-               DEV_RX_OFFLOAD_UDP_CKSUM |
-               DEV_RX_OFFLOAD_TCP_LRO;
-       dev_info->tx_offload_capa = 0;
 
+       host_features = VTPCI_OPS(hw)->get_features(hw);
+       dev_info->rx_offload_capa = 0;
+       if (host_features & (1ULL << VIRTIO_NET_F_GUEST_CSUM)) {
+               dev_info->rx_offload_capa |=
+                       DEV_RX_OFFLOAD_TCP_CKSUM |
+                       DEV_RX_OFFLOAD_UDP_CKSUM;
+       }
+       tso_mask = (1ULL << VIRTIO_NET_F_GUEST_TSO4) |
+               (1ULL << VIRTIO_NET_F_GUEST_TSO6);
+       if ((host_features & tso_mask) == tso_mask)
+               dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_TCP_LRO;
+
+       dev_info->tx_offload_capa = 0;
        if (hw->guest_features & (1ULL << VIRTIO_NET_F_CSUM)) {
                dev_info->tx_offload_capa |=
                        DEV_TX_OFFLOAD_UDP_CKSUM |
                        DEV_TX_OFFLOAD_TCP_CKSUM;
        }
-
        tso_mask = (1ULL << VIRTIO_NET_F_HOST_TSO4) |
                (1ULL << VIRTIO_NET_F_HOST_TSO6);
        if ((hw->guest_features & tso_mask) == tso_mask)