#include <rte_pci.h>
#include <rte_bus_pci.h>
-#include <rte_ethdev_driver.h>
+#include <ethdev_driver.h>
+
+#include "virtio.h"
struct virtqueue;
struct virtnet_ctl;
#define VIRTIO_MSI_QUEUE_VECTOR 22 /* vector for selected VQ notifications
(16, RW) */
-/* The bit of the ISR which indicates a device has an interrupt. */
-#define VIRTIO_PCI_ISR_INTR 0x1
-/* The bit of the ISR which indicates a device configuration change. */
-#define VIRTIO_PCI_ISR_CONFIG 0x2
-/* Vector value used to disable MSI for queue. */
-#define VIRTIO_MSI_NO_VECTOR 0xFFFF
-
-/* VirtIO device IDs. */
-#define VIRTIO_ID_NETWORK 0x01
-#define VIRTIO_ID_BLOCK 0x02
-#define VIRTIO_ID_CONSOLE 0x03
-#define VIRTIO_ID_ENTROPY 0x04
-#define VIRTIO_ID_BALLOON 0x05
-#define VIRTIO_ID_IOMEMORY 0x06
-#define VIRTIO_ID_9P 0x09
-
-/* Status byte for guest to report progress. */
-#define VIRTIO_CONFIG_STATUS_RESET 0x00
-#define VIRTIO_CONFIG_STATUS_ACK 0x01
-#define VIRTIO_CONFIG_STATUS_DRIVER 0x02
-#define VIRTIO_CONFIG_STATUS_DRIVER_OK 0x04
-#define VIRTIO_CONFIG_STATUS_FEATURES_OK 0x08
-#define VIRTIO_CONFIG_STATUS_FAILED 0x80
-
-/*
- * Each virtqueue indirect descriptor list must be physically contiguous.
- * To allow us to malloc(9) each list individually, limit the number
- * supported to what will fit in one page. With 4KB pages, this is a limit
- * of 256 descriptors. If there is ever a need for more, we can switch to
- * contigmalloc(9) for the larger allocations, similar to what
- * bus_dmamem_alloc(9) does.
- *
- * Note the sizeof(struct vring_desc) is 16 bytes.
- */
-#define VIRTIO_MAX_INDIRECT ((int) (PAGE_SIZE / 16))
-
-/* The feature bitmap for virtio net */
-#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
-#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
-#define VIRTIO_NET_F_MTU 3 /* Initial MTU advice. */
-#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
-#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
-#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
-#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
-#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
-#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
-#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
-#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
-#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
-#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
-#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
-#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
-#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
-#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
-#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
-#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the
- * network */
-#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow
- * Steering */
-#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
-
-/* Do we get callbacks when the ring is completely used, even if we've
- * suppressed them? */
-#define VIRTIO_F_NOTIFY_ON_EMPTY 24
-
-/* Can the device handle any descriptor layout? */
-#define VIRTIO_F_ANY_LAYOUT 27
-
-/* We support indirect buffer descriptors */
-#define VIRTIO_RING_F_INDIRECT_DESC 28
-
-#define VIRTIO_F_VERSION_1 32
-#define VIRTIO_F_IOMMU_PLATFORM 33
-#define VIRTIO_F_RING_PACKED 34
-
-/*
- * Some VirtIO feature bits (currently bits 28 through 31) are
- * reserved for the transport being used (eg. virtio_ring), the
- * rest are per-device feature bits.
- */
-#define VIRTIO_TRANSPORT_F_START 28
-#define VIRTIO_TRANSPORT_F_END 34
-
-/*
- * Inorder feature indicates that all buffers are used by the device
- * in the same order in which they have been made available.
- */
-#define VIRTIO_F_IN_ORDER 35
-
-/*
- * This feature indicates that memory accesses by the driver and the device
- * are ordered in a way described by the platform.
- */
-#define VIRTIO_F_ORDER_PLATFORM 36
-
-/* The Guest publishes the used index for which it expects an interrupt
- * at the end of the avail ring. Host should ignore the avail->flags field. */
-/* The Host publishes the avail index for which it expects a kick
- * at the end of the used ring. Guest should ignore the used->flags field. */
-#define VIRTIO_RING_F_EVENT_IDX 29
-
-#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
-#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
-
-/*
- * Maximum number of virtqueues per device.
- */
-#define VIRTIO_MAX_VIRTQUEUE_PAIRS 8
-#define VIRTIO_MAX_VIRTQUEUES (VIRTIO_MAX_VIRTQUEUE_PAIRS * 2 + 1)
-
/* Common configuration */
#define VIRTIO_PCI_CAP_COMMON_CFG 1
/* Notifications */
uint32_t queue_used_hi; /* read-write */
};
-struct virtio_hw;
-
-struct virtio_pci_ops {
- void (*read_dev_cfg)(struct virtio_hw *hw, size_t offset,
- void *dst, int len);
- void (*write_dev_cfg)(struct virtio_hw *hw, size_t offset,
- const void *src, int len);
-
- uint8_t (*get_status)(struct virtio_hw *hw);
- void (*set_status)(struct virtio_hw *hw, uint8_t status);
-
- uint64_t (*get_features)(struct virtio_hw *hw);
- void (*set_features)(struct virtio_hw *hw, uint64_t features);
-
- uint8_t (*get_isr)(struct virtio_hw *hw);
-
- uint16_t (*set_config_irq)(struct virtio_hw *hw, uint16_t vec);
-
- uint16_t (*set_queue_irq)(struct virtio_hw *hw, struct virtqueue *vq,
- uint16_t vec);
-
- uint16_t (*get_queue_num)(struct virtio_hw *hw, uint16_t queue_id);
- int (*setup_queue)(struct virtio_hw *hw, struct virtqueue *vq);
- void (*del_queue)(struct virtio_hw *hw, struct virtqueue *vq);
- void (*notify_queue)(struct virtio_hw *hw, struct virtqueue *vq);
+enum virtio_msix_status {
+ VIRTIO_MSIX_NONE = 0,
+ VIRTIO_MSIX_DISABLED = 1,
+ VIRTIO_MSIX_ENABLED = 2
};
-struct virtio_net_config;
-
-struct virtio_hw {
- struct virtnet_ctl *cvq;
- uint64_t req_guest_features;
- uint64_t guest_features;
- uint32_t max_queue_pairs;
- bool started;
- uint16_t max_mtu;
- uint16_t vtnet_hdr_size;
- uint8_t vlan_strip;
- uint8_t use_msix;
- uint8_t modern;
- uint8_t use_simple_rx;
- uint8_t use_inorder_rx;
- uint8_t use_inorder_tx;
- uint8_t weak_barriers;
- bool has_tx_offload;
- bool has_rx_offload;
- uint16_t port_id;
- uint8_t mac_addr[ETHER_ADDR_LEN];
- uint32_t notify_off_multiplier;
- uint8_t *isr;
- uint16_t *notify_base;
+struct virtio_pci_dev {
+ struct virtio_hw hw;
struct virtio_pci_common_cfg *common_cfg;
struct virtio_net_config *dev_cfg;
- void *virtio_user_dev;
- /*
- * App management thread and virtio interrupt handler thread
- * both can change device state, this lock is meant to avoid
- * such a contention.
- */
- rte_spinlock_t state_lock;
- struct rte_mbuf **inject_pkts;
- bool opened;
-
- struct virtqueue **vqs;
+ enum virtio_msix_status msix_status;
+ uint8_t *isr;
+ uint16_t *notify_base;
+ uint32_t notify_off_multiplier;
+ bool modern;
};
+#define virtio_pci_get_dev(hwp) container_of(hwp, struct virtio_pci_dev, hw)
-/*
- * While virtio_hw is stored in shared memory, this structure stores
- * some infos that may vary in the multiple process model locally.
- * For example, the vtpci_ops pointer.
- */
-struct virtio_hw_internal {
- const struct virtio_pci_ops *vtpci_ops;
+struct virtio_pci_internal {
struct rte_pci_ioport io;
+ struct rte_pci_device *dev;
};
-#define VTPCI_OPS(hw) (virtio_hw_internal[(hw)->port_id].vtpci_ops)
-#define VTPCI_IO(hw) (&virtio_hw_internal[(hw)->port_id].io)
+extern struct virtio_pci_internal virtio_pci_internal[RTE_MAX_ETHPORTS];
-extern struct virtio_hw_internal virtio_hw_internal[RTE_MAX_ETHPORTS];
+#define VTPCI_IO(hw) (&virtio_pci_internal[(hw)->port_id].io)
+#define VTPCI_DEV(hw) (virtio_pci_internal[(hw)->port_id].dev)
-/*
- * This structure is just a reference to read
- * net device specific config space; it just a chodu structure
- *
- */
-struct virtio_net_config {
- /* The config defining mac address (if VIRTIO_NET_F_MAC) */
- uint8_t mac[ETHER_ADDR_LEN];
- /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
- uint16_t status;
- uint16_t max_virtqueue_pairs;
- uint16_t mtu;
-} __attribute__((packed));
-
/*
* How many bits to shift physical queue address written to QUEUE_PFN.
* 12 is historical, and due to x86 page size.
*/
#define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12
-/* The alignment to use between consumer and producer parts of vring. */
-#define VIRTIO_PCI_VRING_ALIGN 4096
-
-enum virtio_msix_status {
- VIRTIO_MSIX_NONE = 0,
- VIRTIO_MSIX_DISABLED = 1,
- VIRTIO_MSIX_ENABLED = 2
-};
-
-static inline int
-vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
-{
- return (hw->guest_features & (1ULL << bit)) != 0;
-}
-
-static inline int
-vtpci_packed_queue(struct virtio_hw *hw)
-{
- return vtpci_with_feature(hw, VIRTIO_F_RING_PACKED);
-}
-
/*
* Function declaration from virtio_pci.c
*/
-int vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw);
-void vtpci_reset(struct virtio_hw *);
-
-void vtpci_reinit_complete(struct virtio_hw *);
-
-uint8_t vtpci_get_status(struct virtio_hw *);
-void vtpci_set_status(struct virtio_hw *, uint8_t);
-
-uint64_t vtpci_negotiate_features(struct virtio_hw *, uint64_t);
-
-void vtpci_write_dev_config(struct virtio_hw *, size_t, const void *, int);
-
-void vtpci_read_dev_config(struct virtio_hw *, size_t, void *, int);
-
-uint8_t vtpci_isr(struct virtio_hw *);
-
-enum virtio_msix_status vtpci_msix_detect(struct rte_pci_device *dev);
+int vtpci_init(struct rte_pci_device *pci_dev, struct virtio_pci_dev *dev);
+void vtpci_legacy_ioport_unmap(struct virtio_hw *hw);
+int vtpci_legacy_ioport_map(struct virtio_hw *hw);
-extern const struct virtio_pci_ops legacy_ops;
-extern const struct virtio_pci_ops modern_ops;
-extern const struct virtio_pci_ops virtio_user_ops;
+extern const struct virtio_ops legacy_ops;
+extern const struct virtio_ops modern_ops;
#endif /* _VIRTIO_PCI_H_ */
git.droids-corp.org / dpdk.git / blobdiff