-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
#ifndef _VIRTQUEUE_H_
#include <rte_atomic.h>
#include <rte_memory.h>
-#include <rte_memzone.h>
#include <rte_mempool.h>
#include "virtio_pci.h"
#include "virtio_ring.h"
#include "virtio_logs.h"
+#include "virtio_rxtx.h"
struct rte_mbuf;
#define VIRTQUEUE_MAX_NAME_SZ 32
+#ifdef RTE_VIRTIO_USER
+/**
+ * Return the physical address (or virtual address in case of
+ * virtio-user) of mbuf data buffer.
+ *
+ * The address is firstly casted to the word size (sizeof(uintptr_t))
+ * before casting it to uint64_t. This is to make it work with different
+ * combination of word size (64 bit and 32 bit) and virtio device
+ * (virtio-pci and virtio-user).
+ */
+#define VIRTIO_MBUF_ADDR(mb, vq) \
+ ((uint64_t)(*(uintptr_t *)((uintptr_t)(mb) + (vq)->offset)))
+#else
+#define VIRTIO_MBUF_ADDR(mb, vq) ((mb)->buf_iova)
+#endif
+
+/**
+ * Return the physical address (or virtual address in case of
+ * virtio-user) of mbuf data buffer, taking care of mbuf data offset
+ */
+#define VIRTIO_MBUF_DATA_DMA_ADDR(mb, vq) \
+ (VIRTIO_MBUF_ADDR(mb, vq) + (mb)->data_off)
+
#define VTNET_SQ_RQ_QUEUE_IDX 0
#define VTNET_SQ_TQ_QUEUE_IDX 1
#define VTNET_SQ_CQ_QUEUE_IDX 2
} __attribute__((__packed__));
#define VIRTIO_NET_CTRL_MAC 1
- #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
- #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
+#define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
+#define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
/**
* Control VLAN filtering
#define VIRTIO_NET_CTRL_VLAN_ADD 0
#define VIRTIO_NET_CTRL_VLAN_DEL 1
+/*
+ * Control link announce acknowledgement
+ *
+ * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that
+ * driver has recevied the notification; device would clear the
+ * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives
+ * this command.
+ */
+#define VIRTIO_NET_CTRL_ANNOUNCE 3
+#define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0
+
struct virtio_net_ctrl_hdr {
uint8_t class;
uint8_t cmd;
void *vq_ring_virt_mem; /**< linear address of vring*/
unsigned int vq_ring_size;
- phys_addr_t vq_ring_mem; /**< physical address of vring */
+ union {
+ struct virtnet_rx rxq;
+ struct virtnet_tx txq;
+ struct virtnet_ctl cq;
+ };
+
+ rte_iova_t vq_ring_mem; /**< physical address of vring,
+ * or virtual address for virtio_user. */
/**
* Head of the free chain in the descriptor table. If
uint16_t vq_desc_head_idx;
uint16_t vq_desc_tail_idx;
uint16_t vq_queue_index; /**< PCI queue index */
+ uint16_t offset; /**< relative offset to obtain addr in mbuf */
uint16_t *notify_addr;
- int configured;
struct rte_mbuf **sw_ring; /**< RX software ring. */
struct vq_desc_extra vq_descx[0];
};
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
-#define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
-
/**
* This is the first element of the scatter-gather list. If you don't
* specify GSO or CSUM features, you can simply ignore the header.
*/
struct virtio_net_hdr {
#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /**< Use csum_start,csum_offset*/
+#define VIRTIO_NET_HDR_F_DATA_VALID 2 /**< Checksum is valid */
uint8_t flags;
#define VIRTIO_NET_HDR_GSO_NONE 0 /**< Not a GSO frame */
#define VIRTIO_NET_HDR_GSO_TCPV4 1 /**< GSO frame, IPv4 TCP (TSO) */
/**
* Tell the backend not to interrupt us.
*/
-void virtqueue_disable_intr(struct virtqueue *vq);
+static inline void
+virtqueue_disable_intr(struct virtqueue *vq)
+{
+ vq->vq_ring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
+}
+
+/**
+ * Tell the backend to interrupt us.
+ */
+static inline void
+virtqueue_enable_intr(struct virtqueue *vq)
+{
+ vq->vq_ring.avail->flags &= (~VRING_AVAIL_F_NO_INTERRUPT);
+}
+
/**
* Dump virtqueue internal structures, for debug purpose only.
*/
/**
* Get all mbufs to be freed.
*/
-struct rte_mbuf *virtqueue_detatch_unused(struct virtqueue *vq);
+struct rte_mbuf *virtqueue_detach_unused(struct virtqueue *vq);
+
+/* Flush the elements in the used ring. */
+void virtqueue_rxvq_flush(struct virtqueue *vq);
static inline int
virtqueue_full(const struct virtqueue *vq)
return vq->vq_free_cnt == 0;
}
+static inline int
+virtio_get_queue_type(struct virtio_hw *hw, uint16_t vtpci_queue_idx)
+{
+ if (vtpci_queue_idx == hw->max_queue_pairs * 2)
+ return VTNET_CQ;
+ else if (vtpci_queue_idx % 2 == 0)
+ return VTNET_RQ;
+ else
+ return VTNET_TQ;
+}
+
#define VIRTQUEUE_NUSED(vq) ((uint16_t)((vq)->vq_ring.used->idx - (vq)->vq_used_cons_idx))
+void vq_ring_free_chain(struct virtqueue *vq, uint16_t desc_idx);
+void vq_ring_free_inorder(struct virtqueue *vq, uint16_t desc_idx,
+ uint16_t num);
+
static inline void
vq_update_avail_idx(struct virtqueue *vq)
{
* For virtio on IA, the notificaiton is through io port operation
* which is a serialization instruction itself.
*/
- vq->hw->vtpci_ops->notify_queue(vq->hw, vq);
+ VTPCI_OPS(vq->hw)->notify_queue(vq->hw, vq);
}
#ifdef RTE_LIBRTE_VIRTIO_DEBUG_DUMP