#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
-#include <rte_memzone.h>
#include <rte_eal.h>
-#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_atomic.h>
#include <rte_cycles.h>
#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
-#include <rte_pci.h>
#include <rte_random.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
-#include <rte_log.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
-#include <rte_memcpy.h>
#include <rte_ip.h>
#include <rte_tcp.h>
#include <rte_arp.h>
addr.addr_bytes[0], addr.addr_bytes[1], addr.addr_bytes[2], \
addr.addr_bytes[3], addr.addr_bytes[4], addr.addr_bytes[5])
-uint8_t slaves[RTE_MAX_ETHPORTS];
-uint8_t slaves_count;
+uint16_t slaves[RTE_MAX_ETHPORTS];
+uint16_t slaves_count;
-static uint8_t BOND_PORT = 0xff;
+static uint16_t BOND_PORT = 0xffff;
static struct rte_mempool *mbuf_pool;
.hw_ip_checksum = 0, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
},
.rx_adv_conf = {
.rss_conf = {
};
static void
-slave_port_init(uint8_t portid, struct rte_mempool *mbuf_pool)
+slave_port_init(uint16_t portid, struct rte_mempool *mbuf_pool)
{
int retval;
+ uint16_t nb_rxd = RTE_RX_DESC_DEFAULT;
+ uint16_t nb_txd = RTE_TX_DESC_DEFAULT;
if (portid >= rte_eth_dev_count())
rte_exit(EXIT_FAILURE, "Invalid port\n");
rte_exit(EXIT_FAILURE, "port %u: configuration failed (res=%d)\n",
portid, retval);
+ retval = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd, &nb_txd);
+ if (retval != 0)
+ rte_exit(EXIT_FAILURE, "port %u: rte_eth_dev_adjust_nb_rx_tx_desc "
+ "failed (res=%d)\n", portid, retval);
+
/* RX setup */
- retval = rte_eth_rx_queue_setup(portid, 0, RTE_RX_DESC_DEFAULT,
+ retval = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
rte_eth_dev_socket_id(portid), NULL,
mbuf_pool);
if (retval < 0)
portid, retval);
/* TX setup */
- retval = rte_eth_tx_queue_setup(portid, 0, RTE_TX_DESC_DEFAULT,
+ retval = rte_eth_tx_queue_setup(portid, 0, nb_txd,
rte_eth_dev_socket_id(portid), NULL);
if (retval < 0)
struct ether_addr addr;
rte_eth_macaddr_get(portid, &addr);
- printf("Port %u MAC: ", (unsigned)portid);
+ printf("Port %u MAC: ", portid);
PRINT_MAC(addr);
printf("\n");
}
{
int retval;
uint8_t i;
+ uint16_t nb_rxd = RTE_RX_DESC_DEFAULT;
+ uint16_t nb_txd = RTE_TX_DESC_DEFAULT;
retval = rte_eth_bond_create("bond0", BONDING_MODE_ALB,
0 /*SOCKET_ID_ANY*/);
rte_exit(EXIT_FAILURE,
"Faled to create bond port\n");
- BOND_PORT = (uint8_t)retval;
+ BOND_PORT = retval;
retval = rte_eth_dev_configure(BOND_PORT, 1, 1, &port_conf);
if (retval != 0)
rte_exit(EXIT_FAILURE, "port %u: configuration failed (res=%d)\n",
BOND_PORT, retval);
+ retval = rte_eth_dev_adjust_nb_rx_tx_desc(BOND_PORT, &nb_rxd, &nb_txd);
+ if (retval != 0)
+ rte_exit(EXIT_FAILURE, "port %u: rte_eth_dev_adjust_nb_rx_tx_desc "
+ "failed (res=%d)\n", BOND_PORT, retval);
+
/* RX setup */
- retval = rte_eth_rx_queue_setup(BOND_PORT, 0, RTE_RX_DESC_DEFAULT,
+ retval = rte_eth_rx_queue_setup(BOND_PORT, 0, nb_rxd,
rte_eth_dev_socket_id(BOND_PORT), NULL,
mbuf_pool);
if (retval < 0)
BOND_PORT, retval);
/* TX setup */
- retval = rte_eth_tx_queue_setup(BOND_PORT, 0, RTE_TX_DESC_DEFAULT,
+ retval = rte_eth_tx_queue_setup(BOND_PORT, 0, nb_txd,
rte_eth_dev_socket_id(BOND_PORT), NULL);
if (retval < 0)
{
cmdline_printf(cl,
"ALB - link bonding mode 6 example\n"
- "send IP - sends one ARPrequest thru bonding for IP.\n"
+ "send IP - sends one ARPrequest through bonding for IP.\n"
"start - starts listening ARPs.\n"
"stop - stops lcore_main.\n"
"show - shows some bond info: ex. active slaves etc.\n"
struct cmdline *cl,
__attribute__((unused)) void *data)
{
- uint8_t slaves[16] = {0};
+ uint16_t slaves[16] = {0};
uint8_t len = 16;
struct ether_addr addr;
- uint8_t i = 0;
+ uint16_t i = 0;
while (i < slaves_count) {
rte_eth_macaddr_get(i, &addr);