--- /dev/null
+#########################################################################
+#
+# @par
+# BSD LICENSE
+#
+# Copyright(c) 2010-2012 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# version: DPDK.L.1.2.3-3
+#########################################################################
+########################################################
+#
+# This file is the configuration for a single dh89xxcc_qa
+# device.
+#
+# Each device has up to two accelerators.
+# - The client may load balance between these
+# accelerators.
+# Each accelerator has 8 independent ring banks.
+# - The interrupt for each can be directed to a
+# specific core.
+# Each ring bank as 16 rings (hardware assisted queues).
+#
+########################################################
+
+##############################################
+# General Section
+##############################################
+
+[GENERAL]
+ServicesEnabled = cy0;cy1
+
+# Look Aside Cryptographic Configuration
+cyHmacAuthMode = 1
+
+# Look Aside Compression Configuration
+dcTotalSRAMAvailable = 0
+dcSRAMPerInstance = 0
+
+# Firmware Location Configuration
+Firmware_UofPath = uof_firmware.bin
+Firmware_MmpPath = mmp_firmware.bin
+
+# QAT Parameters
+Accel0AdminBankNumber = 0
+Accel0AcceleratorNumber = 0
+Accel0AdminTx = 0
+Accel0AdminRx = 1
+
+Accel1AcceleratorNumber = 1
+Accel1AdminBankNumber = 0
+Accel1AdminTx = 0
+Accel1AdminRx = 1
+
+#Statistics, valid values: 1,0
+statsGeneral = 1
+statsDc = 1
+statsDh = 1
+statsDrbg = 1
+statsDsa = 1
+statsEcc = 1
+statsKeyGen = 1
+statsLn = 1
+statsPrime = 1
+statsRsa = 1
+statsSym = 1
+
+#Debug feature, if set to 1 it enables additional entries in /proc filesystem
+ProcDebug = 1
+
+
+################################################
+#
+# Hardware Access Ring Bank Configuration
+# Each Accelerator has 8 ring banks (0-7)
+# If the OS supports MSI-X, each ring bank has an
+# steerable MSI-x interrupt which may be
+# affinitized to a particular node/core.
+#
+################################################
+
+
+[Accelerator0]
+Bank0InterruptCoalescingEnabled = 1
+Bank0InterruptCoalescingTimerNs = 10000
+Bank0CoreIDAffinity = 0
+Bank0InterruptCoalescingNumResponses = 0
+
+Bank1InterruptCoalescingEnabled = 1
+Bank1InterruptCoalescingTimerNs = 10000
+Bank1CoreIDAffinity = 2
+Bank1InterruptCoalescingNumResponses = 0
+
+Bank2InterruptCoalescingEnabled = 1
+Bank2InterruptCoalescingTimerNs = 10000
+Bank2CoreIDAffinity = 4
+Bank2InterruptCoalescingNumResponses = 0
+
+Bank3InterruptCoalescingEnabled = 1
+Bank3InterruptCoalescingTimerNs = 10000
+Bank3CoreIDAffinity = 6
+Bank3InterruptCoalescingNumResponses = 0
+
+Bank4InterruptCoalescingEnabled = 1
+Bank4InterruptCoalescingTimerNs = 10000
+Bank4CoreIDAffinity = 7
+Bank4InterruptCoalescingNumResponses = 0
+
+Bank5InterruptCoalescingEnabled = 1
+Bank5InterruptCoalescingTimerNs = 10000
+Bank5CoreIDAffinity = 7
+Bank5InterruptCoalescingNumResponses = 0
+
+Bank6InterruptCoalescingEnabled = 1
+Bank6InterruptCoalescingTimerNs = 10000
+Bank6CoreIDAffinity = 7
+Bank6InterruptCoalescingNumResponses = 0
+
+Bank7InterruptCoalescingEnabled = 1
+Bank7InterruptCoalescingTimerNs = 10000
+Bank7CoreIDAffinity = 7
+Bank7InterruptCoalescingNumResponses = 0
+
+[Accelerator1]
+Bank0InterruptCoalescingEnabled = 1
+Bank0InterruptCoalescingTimerNs = 10000
+Bank0CoreIDAffinity = 1
+Bank0InterruptCoalescingNumResponses = 0
+
+Bank1InterruptCoalescingEnabled = 1
+Bank1InterruptCoalescingTimerNs = 10000
+Bank1CoreIDAffinity = 3
+Bank1InterruptCoalescingNumResponses = 0
+
+Bank2InterruptCoalescingEnabled = 1
+Bank2InterruptCoalescingTimerNs = 10000
+Bank2CoreIDAffinity = 5
+Bank2InterruptCoalescingNumResponses = 0
+
+Bank3InterruptCoalescingEnabled = 1
+Bank3InterruptCoalescingTimerNs = 10000
+Bank3CoreIDAffinity = 7
+Bank3InterruptCoalescingNumResponses = 0
+
+Bank4InterruptCoalescingEnabled = 1
+Bank4InterruptCoalescingTimerNs = 10000
+Bank4CoreIDAffinity = 7
+Bank4InterruptCoalescingNumResponses = 0
+
+Bank5InterruptCoalescingEnabled = 1
+Bank5InterruptCoalescingTimerNs = 10000
+Bank5CoreIDAffinity = 7
+Bank5InterruptCoalescingNumResponses = 0
+
+Bank6InterruptCoalescingEnabled = 1
+Bank6InterruptCoalescingTimerNs = 10000
+Bank6CoreIDAffinity = 7
+Bank6InterruptCoalescingNumResponses = 0
+
+Bank7InterruptCoalescingEnabled = 1
+Bank7InterruptCoalescingTimerNs = 10000
+Bank7CoreIDAffinity = 7
+Bank7InterruptCoalescingNumResponses = 0
+
+#######################################################
+#
+# Logical Instances Section
+# A logical instance allows each address domain
+# (kernel space and individual user space processes)
+# to configure rings (i.e. hardware assisted queues)
+# to be used by that address domain and to define the
+# behavior of that ring.
+#
+# The address domains are in the following format
+# - For kernel address domains
+# [KERNEL]
+# - For user process address domains
+# [xxxxx]
+# Where xxxxx may be any ascii value which uniquely identifies
+# the user mode process.
+# To allow the driver correctly configure the
+# logical instances associated with this user process,
+# the process must call the icp_sal_userStart(...)
+# passing the xxxxx string during process initialisation.
+# When the user space process is finish it must call
+# icp_sal_userStop(...) to free resources.
+# If there are multiple devices present in the system all conf
+# files that describe the devices must have the same address domain
+# sections even if the address domain does not configure any instances
+# on that particular device. So if icp_sal_userStart("xxxxx") is called
+# then user process address domain [xxxxx] needs to be present in all
+# conf files for all devices in the system.
+#
+# Items configurable by a logical instance are:
+# - Name of the logical instance
+# - The accelerator associated with this logical
+# instance
+# - The ring bank associated with this logical
+# instance.
+# - The response mode associated wth this logical instance (0
+# for IRQ or 1 for polled).
+# - The ring for receiving and the ring for transmitting.
+# - The number of concurrent requests supported by a pair of
+# rings on this instance (tx + rx). Note this number affects
+# the amount of memory allocated by the driver. Also
+# Bank<n>InterruptCoalescingNumResponses is only supported for
+# number of concurrent requests equal to 512.
+#
+# Note: Logical instances may not share the same ring, but
+# may share a ring bank.
+#
+# The format of the logical instances are:
+# - For crypto:
+# Cy<n>Name = "xxxx"
+# Cy<n>AcceleratorNumber = 0|1
+# Cy<n>BankNumber = 0-7
+# Cy<n>IsPolled = 0|1
+# Cy<n>NumConcurrentSymRequests = 64|128|256|512|1024|2048|4096
+# Cy<n>NumConcurrentAsymRequests = 64|128|256|512|1024|2048|4096
+# Cy<n>RingAsymTx = 0-15
+# Cy<n>RingAsymRx = 0-15
+# Cy<n>RingSymTxHi = 0-15
+# Cy<n>RingSymRxHi = 0-15
+# Cy<n>RingSymRx = 0-15
+#
+# - For Data Compression
+# Dc<n>Name = "xxxx"
+# Dc<n>AcceleratorNumber = 0|1
+# Dc<n>BankNumber = 0-7
+# Dc<n>IsPolled = 0|1
+# Dc<n>NumConcurrentRequests = 64|128|256|512|1024|2048|4096
+# Dc<n>RingTx = 0-15
+# Dc<n>RingRx = 0-15
+#
+# Where:
+# - n is the number of this logical instance starting at 0.
+# - xxxx may be any ascii value which identifies the logical instance.
+#
+########################################################
+
+##############################################
+# Kernel Instances Section
+##############################################
+[KERNEL]
+NumberCyInstances = 0
+NumberDcInstances = 0
+
+
+##############################################
+# User Process Instance Section
+##############################################
+[SSL]
+NumberCyInstances = 8
+NumberDcInstances = 0
+
+# Crypto - User instance #0
+Cy0Name = "SSL0"
+Cy0IsPolled = 1
+Cy0AcceleratorNumber = 0
+Cy0ExecutionEngine = 0
+Cy0BankNumber = 0
+Cy0NumConcurrentSymRequests = 512
+Cy0NumConcurrentAsymRequests = 64
+
+Cy0RingAsymTx = 2
+Cy0RingAsymRx = 3
+Cy0RingSymTxHi = 4
+Cy0RingSymRxHi = 5
+Cy0RingSymTxLo = 6
+Cy0RingSymRxLo = 7
+
+# Crypto - User instance #1
+Cy1Name = "SSL1"
+Cy1AcceleratorNumber = 1
+Cy1ExecutionEngine = 0
+Cy1BankNumber = 0
+Cy1IsPolled = 1
+Cy1NumConcurrentSymRequests = 512
+Cy1NumConcurrentAsymRequests = 64
+
+Cy1RingAsymTx = 2
+Cy1RingAsymRx = 3
+Cy1RingSymTxHi = 4
+Cy1RingSymRxHi = 5
+Cy1RingSymTxLo = 6
+Cy1RingSymRxLo = 7
+
+# Crypto - User instance #2
+Cy2Name = "SSL2"
+Cy2IsPolled= 1
+Cy2AcceleratorNumber = 0
+Cy2ExecutionEngine = 1
+Cy2BankNumber = 1
+Cy2NumConcurrentSymRequests = 512
+Cy2NumConcurrentAsymRequests = 64
+
+Cy2RingAsymTx = 0
+Cy2RingAsymRx = 1
+Cy2RingSymTxHi = 2
+Cy2RingSymRxHi = 3
+Cy2RingSymTxLo = 4
+Cy2RingSymRxLo = 5
+
+# Crypto - User instance #3
+Cy3Name = "SSL3"
+Cy3AcceleratorNumber = 1
+Cy3ExecutionEngine = 1
+Cy3BankNumber = 1
+Cy3IsPolled = 1
+Cy3NumConcurrentSymRequests = 512
+Cy3NumConcurrentAsymRequests = 64
+
+Cy3RingAsymTx = 0
+Cy3RingAsymRx = 1
+Cy3RingSymTxHi = 2
+Cy3RingSymRxHi = 3
+Cy3RingSymTxLo = 4
+Cy3RingSymRxLo = 5
+
+
+# Crypto - User instance #4
+Cy4Name = "SSL4"
+Cy4IsPolled= 1
+Cy4AcceleratorNumber = 0
+Cy4ExecutionEngine = 0
+Cy4BankNumber = 2
+Cy4NumConcurrentSymRequests = 512
+Cy4NumConcurrentAsymRequests = 64
+
+Cy4RingAsymTx = 0
+Cy4RingAsymRx = 1
+Cy4RingSymTxHi = 2
+Cy4RingSymRxHi = 3
+Cy4RingSymTxLo = 4
+Cy4RingSymRxLo = 5
+
+# Crypto - User instance #5
+Cy5Name = "SSL5"
+Cy5AcceleratorNumber = 1
+Cy5ExecutionEngine = 0
+Cy5BankNumber = 2
+Cy5IsPolled = 1
+Cy5NumConcurrentSymRequests = 512
+Cy5NumConcurrentAsymRequests = 64
+
+Cy5RingAsymTx = 0
+Cy5RingAsymRx = 1
+Cy5RingSymTxHi = 2
+Cy5RingSymRxHi = 3
+Cy5RingSymTxLo = 4
+Cy5RingSymRxLo = 5
+
+# Crypto - User instance #6
+Cy6Name = "SSL6"
+Cy6IsPolled = 1
+Cy6AcceleratorNumber = 0
+Cy6ExecutionEngine = 1
+Cy6BankNumber = 3
+Cy6NumConcurrentSymRequests = 512
+Cy6NumConcurrentAsymRequests = 64
+
+Cy6RingAsymTx = 0
+Cy6RingAsymRx = 1
+Cy6RingSymTxHi = 2
+Cy6RingSymRxHi = 3
+Cy6RingSymTxLo = 4
+Cy6RingSymRxLo = 5
+
+# Crypto - User instance #7
+Cy7Name = "SSL7"
+Cy7AcceleratorNumber = 1
+Cy7ExecutionEngine = 1
+Cy7BankNumber = 3
+Cy7IsPolled = 1
+Cy7NumConcurrentSymRequests = 512
+Cy7NumConcurrentAsymRequests = 64
+
+Cy7RingAsymTx = 0
+Cy7RingAsymRx = 1
+Cy7RingSymTxHi = 2
+Cy7RingSymRxHi = 3
+Cy7RingSymTxLo = 4
+Cy7RingSymRxLo = 5
git.droids-corp.org / dpdk.git / blobdiff