-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2015 Intel Corporation
*/
#ifndef _RTE_ETHTOOL_H_
* - (0) if successful.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_ethtool_get_drvinfo(uint8_t port_id, struct ethtool_drvinfo *drvinfo);
+int rte_ethtool_get_drvinfo(uint16_t port_id, struct ethtool_drvinfo *drvinfo);
/**
* Retrieve the Ethernet device register length in bytes.
* - (-ENODEV) if *port_id* invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_get_regs_len(uint8_t port_id);
+int rte_ethtool_get_regs_len(uint16_t port_id);
/**
* Retrieve the Ethernet device register information according to
* - (-ENODEV) if *port_id* invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_get_regs(uint8_t port_id, struct ethtool_regs *regs,
+int rte_ethtool_get_regs(uint16_t port_id, struct ethtool_regs *regs,
void *data);
/**
* - (-EINVAL) if parameters invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_get_link(uint8_t port_id);
+int rte_ethtool_get_link(uint16_t port_id);
/**
* Retrieve the Ethernet device EEPROM size
* - (-ENODEV) if *port_id* invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_get_eeprom_len(uint8_t port_id);
+int rte_ethtool_get_eeprom_len(uint16_t port_id);
/**
* Retrieve EEPROM content based upon eeprom range described in ethtool
* - (-ENODEV) if *port_id* invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_get_eeprom(uint8_t port_id, struct ethtool_eeprom *eeprom,
+int rte_ethtool_get_eeprom(uint16_t port_id, struct ethtool_eeprom *eeprom,
void *words);
/**
* - (-EINVAL) if parameters invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_set_eeprom(uint8_t port_id, struct ethtool_eeprom *eeprom,
+int rte_ethtool_set_eeprom(uint16_t port_id, struct ethtool_eeprom *eeprom,
void *words);
/**
* - (-EINVAL) if parameters invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_get_pauseparam(uint8_t port_id,
+int rte_ethtool_get_pauseparam(uint16_t port_id,
struct ethtool_pauseparam *pause_param);
/**
* - (-EINVAL) if parameters invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_set_pauseparam(uint8_t port_id,
+int rte_ethtool_set_pauseparam(uint16_t port_id,
struct ethtool_pauseparam *param);
/**
* - (-ENODEV) if *port_id* invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_net_open(uint8_t port_id);
+int rte_ethtool_net_open(uint16_t port_id);
/**
* Stop the Ethernet device.
* - (0) if successful.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_ethtool_net_stop(uint8_t port_id);
+int rte_ethtool_net_stop(uint16_t port_id);
/**
* Get the Ethernet device MAC address.
* - (0) if successful.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_ethtool_net_get_mac_addr(uint8_t port_id, struct ether_addr *addr);
+int rte_ethtool_net_get_mac_addr(uint16_t port_id, struct ether_addr *addr);
/**
* Setting the Ethernet device MAC address.
* - (-EINVAL) if parameters invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_net_set_mac_addr(uint8_t port_id, struct ether_addr *addr);
+int rte_ethtool_net_set_mac_addr(uint16_t port_id, struct ether_addr *addr);
/**
* Validate if the provided MAC address is valid unicast address
* - (-EINVAL) if parameters invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_net_validate_addr(uint8_t port_id, struct ether_addr *addr);
+int rte_ethtool_net_validate_addr(uint16_t port_id, struct ether_addr *addr);
/**
* Setting the Ethernet device maximum Tx unit.
* - (-EINVAL) if parameters invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_net_change_mtu(uint8_t port_id, int mtu);
+int rte_ethtool_net_change_mtu(uint16_t port_id, int mtu);
/**
* Retrieve the Ethernet device traffic statistics
* - (-EINVAL) if parameters invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_net_get_stats64(uint8_t port_id, struct rte_eth_stats *stats);
+int rte_ethtool_net_get_stats64(uint16_t port_id, struct rte_eth_stats *stats);
/**
* Update the Ethernet device VLAN filter with new vid
* - (-ENODEV) if *port_id* invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_net_vlan_rx_add_vid(uint8_t port_id, uint16_t vid);
+int rte_ethtool_net_vlan_rx_add_vid(uint16_t port_id, uint16_t vid);
/**
* Remove VLAN id from Ethernet device.
* - (-ENODEV) if *port_id* invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_net_vlan_rx_kill_vid(uint8_t port_id, uint16_t vid);
+int rte_ethtool_net_vlan_rx_kill_vid(uint16_t port_id, uint16_t vid);
/**
* Setting the Ethernet device rx mode.
* - (-ENODEV) if *port_id* invalid.
* - others depends on the specific operations implementation.
*/
-int rte_ethtool_net_set_rx_mode(uint8_t port_id);
+int rte_ethtool_net_set_rx_mode(uint16_t port_id);
/**
- * Getting ring paramaters for Ethernet device.
+ * Getting ring parameters for Ethernet device.
*
* @param port_id
* The port identifier of the Ethernet device.
* Only the tx_pending and rx_pending fields of struct ethtool_ringparam
* are used, and the function only gets parameters for queue 0.
*/
-int rte_ethtool_get_ringparam(uint8_t port_id,
+int rte_ethtool_get_ringparam(uint16_t port_id,
struct ethtool_ringparam *ring_param);
/**
- * Setting ring paramaters for Ethernet device.
+ * Setting ring parameters for Ethernet device.
*
* @param port_id
* The port identifier of the Ethernet device.
* Only the tx_pending and rx_pending fields of struct ethtool_ringparam
* are used, and the function only sets parameters for queue 0.
*/
-int rte_ethtool_set_ringparam(uint8_t port_id,
+int rte_ethtool_set_ringparam(uint16_t port_id,
struct ethtool_ringparam *ring_param);
git.droids-corp.org / dpdk.git / blobdiff