remove unused ring includes
[dpdk.git] / examples / ip_reassembly / main.c
index 8184aad..50fe422 100644 (file)
@@ -50,7 +50,6 @@
 #include <rte_memory.h>
 #include <rte_memcpy.h>
 #include <rte_memzone.h>
-#include <rte_tailq.h>
 #include <rte_eal.h>
 #include <rte_per_lcore.h>
 #include <rte_launch.h>
@@ -66,7 +65,6 @@
 #include <rte_debug.h>
 #include <rte_ether.h>
 #include <rte_ethdev.h>
-#include <rte_ring.h>
 #include <rte_mempool.h>
 #include <rte_mbuf.h>
 #include <rte_malloc.h>
@@ -79,8 +77,6 @@
 
 #include <rte_ip_frag.h>
 
-#include "main.h"
-
 #define MAX_PKT_BURST 32
 
 
@@ -88,7 +84,7 @@
 
 #define MAX_JUMBO_PKT_LEN  9600
 
-#define        BUF_SIZE        2048
+#define        BUF_SIZE        RTE_MBUF_DEFAULT_DATAROOM
 #define MBUF_SIZE      \
        (BUF_SIZE + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
 
 static uint32_t max_flow_num = DEF_FLOW_NUM;
 static uint32_t max_flow_ttl = DEF_FLOW_TTL;
 
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-#define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */
-#define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */
-#define RX_WTHRESH 4 /**< Default values of RX write-back threshold reg. */
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-#define TX_PTHRESH 36 /**< Default values of TX prefetch threshold reg. */
-#define TX_HTHRESH 0  /**< Default values of TX host threshold reg. */
-#define TX_WTHRESH 0  /**< Default values of TX write-back threshold reg. */
-
 #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
 
 #define NB_SOCKETS 8
@@ -236,26 +213,6 @@ static struct rte_eth_conf port_conf = {
        },
 };
 
-static const struct rte_eth_rxconf rx_conf = {
-       .rx_thresh = {
-               .pthresh = RX_PTHRESH,
-               .hthresh = RX_HTHRESH,
-               .wthresh = RX_WTHRESH,
-       },
-       .rx_free_thresh = 32,
-};
-
-static const struct rte_eth_txconf tx_conf = {
-       .tx_thresh = {
-               .pthresh = TX_PTHRESH,
-               .hthresh = TX_HTHRESH,
-               .wthresh = TX_WTHRESH,
-       },
-       .tx_free_thresh = 0, /* Use PMD default values */
-       .tx_rs_thresh = 0, /* Use PMD default values */
-       .txq_flags = 0x0,
-};
-
 /*
  * IPv4 forwarding table
  */
@@ -346,7 +303,7 @@ send_burst(struct lcore_queue_conf *qconf, uint32_t thresh, uint8_t port)
                        txmb->tail = 0;
        }
 
-       return (fill);
+       return fill;
 }
 
 /* Enqueue a single packet, and send burst if queue is filled */
@@ -377,7 +334,7 @@ send_single_packet(struct rte_mbuf *m, uint8_t port)
        if(++txmb->head == len)
                txmb->head = 0;
 
-       return (0);
+       return 0;
 }
 
 static inline void
@@ -389,7 +346,8 @@ reassemble(struct rte_mbuf *m, uint8_t portid, uint32_t queue,
        struct rte_ip_frag_death_row *dr;
        struct rx_queue *rxq;
        void *d_addr_bytes;
-       uint8_t next_hop, dst_port;
+       uint32_t next_hop_ipv4;
+       uint8_t next_hop_ipv6, dst_port;
 
        rxq = &qconf->rx_queue_list[queue];
 
@@ -398,7 +356,7 @@ reassemble(struct rte_mbuf *m, uint8_t portid, uint32_t queue,
        dst_port = portid;
 
        /* if packet is IPv4 */
-       if (m->ol_flags & (PKT_RX_IPV4_HDR)) {
+       if (RTE_ETH_IS_IPV4_HDR(m->packet_type)) {
                struct ipv4_hdr *ip_hdr;
                uint32_t ip_dst;
 
@@ -412,8 +370,8 @@ reassemble(struct rte_mbuf *m, uint8_t portid, uint32_t queue,
                        dr = &qconf->death_row;
 
                        /* prepare mbuf: setup l2_len/l3_len. */
-                       m->vlan_macip.f.l2_len = sizeof(*eth_hdr);
-                       m->vlan_macip.f.l3_len = sizeof(*ip_hdr);
+                       m->l2_len = sizeof(*eth_hdr);
+                       m->l3_len = sizeof(*ip_hdr);
 
                        /* process this fragment. */
                        mo = rte_ipv4_frag_reassemble_packet(tbl, dr, m, tms, ip_hdr);
@@ -432,15 +390,14 @@ reassemble(struct rte_mbuf *m, uint8_t portid, uint32_t queue,
                ip_dst = rte_be_to_cpu_32(ip_hdr->dst_addr);
 
                /* Find destination port */
-               if (rte_lpm_lookup(rxq->lpm, ip_dst, &next_hop) == 0 &&
-                               (enabled_port_mask & 1 << next_hop) != 0) {
-                       dst_port = next_hop;
+               if (rte_lpm_lookup(rxq->lpm, ip_dst, &next_hop_ipv4) == 0 &&
+                               (enabled_port_mask & 1 << next_hop_ipv4) != 0) {
+                       dst_port = next_hop_ipv4;
                }
 
                eth_hdr->ether_type = rte_be_to_cpu_16(ETHER_TYPE_IPv4);
-       }
-       /* if packet is IPv6 */
-       else if (m->ol_flags & (PKT_RX_IPV6_HDR | PKT_RX_IPV6_HDR_EXT)) {
+       } else if (RTE_ETH_IS_IPV6_HDR(m->packet_type)) {
+               /* if packet is IPv6 */
                struct ipv6_extension_fragment *frag_hdr;
                struct ipv6_hdr *ip_hdr;
 
@@ -455,8 +412,8 @@ reassemble(struct rte_mbuf *m, uint8_t portid, uint32_t queue,
                        dr  = &qconf->death_row;
 
                        /* prepare mbuf: setup l2_len/l3_len. */
-                       m->vlan_macip.f.l2_len = sizeof(*eth_hdr);
-                       m->vlan_macip.f.l3_len = sizeof(*ip_hdr) + sizeof(*frag_hdr);
+                       m->l2_len = sizeof(*eth_hdr);
+                       m->l3_len = sizeof(*ip_hdr) + sizeof(*frag_hdr);
 
                        mo = rte_ipv6_frag_reassemble_packet(tbl, dr, m, tms, ip_hdr, frag_hdr);
                        if (mo == NULL)
@@ -470,9 +427,9 @@ reassemble(struct rte_mbuf *m, uint8_t portid, uint32_t queue,
                }
 
                /* Find destination port */
-               if (rte_lpm6_lookup(rxq->lpm6, ip_hdr->dst_addr, &next_hop) == 0 &&
-                               (enabled_port_mask & 1 << next_hop) != 0) {
-                       dst_port = next_hop;
+               if (rte_lpm6_lookup(rxq->lpm6, ip_hdr->dst_addr, &next_hop_ipv6) == 0 &&
+                               (enabled_port_mask & 1 << next_hop_ipv6) != 0) {
+                       dst_port = next_hop_ipv6;
                }
 
                eth_hdr->ether_type = rte_be_to_cpu_16(ETHER_TYPE_IPv6);
@@ -604,13 +561,13 @@ parse_flow_num(const char *str, uint32_t min, uint32_t max, uint32_t *val)
        errno = 0;
        v = strtoul(str, &end, 10);
        if (errno != 0 || *end != '\0')
-               return (-EINVAL);
+               return -EINVAL;
 
        if (v < min || v > max)
-               return (-EINVAL);
+               return -EINVAL;
 
        *val = (uint32_t)v;
-       return (0);
+       return 0;
 }
 
 static int
@@ -626,20 +583,20 @@ parse_flow_ttl(const char *str, uint32_t min, uint32_t max, uint32_t *val)
        errno = 0;
        v = strtoul(str, &end, 10);
        if (errno != 0)
-               return (-EINVAL);
+               return -EINVAL;
 
        if (*end != '\0') {
                if (strncmp(frmt_sec, end, sizeof(frmt_sec)) == 0)
                        v *= MS_PER_S;
                else if (strncmp(frmt_msec, end, sizeof (frmt_msec)) != 0)
-                       return (-EINVAL);
+                       return -EINVAL;
        }
 
        if (v < min || v > max)
-               return (-EINVAL);
+               return -EINVAL;
 
        *val = (uint32_t)v;
-       return (0);
+       return 0;
 }
 
 static int
@@ -732,7 +689,7 @@ parse_args(int argc, char **argv)
                                                optarg,
                                                lgopts[option_index].name);
                                        print_usage(prgname);
-                                       return (ret);
+                                       return ret;
                                }
                        }
 
@@ -745,7 +702,7 @@ parse_args(int argc, char **argv)
                                                optarg,
                                                lgopts[option_index].name);
                                        print_usage(prgname);
-                                       return (ret);
+                                       return ret;
                                }
                        }
 
@@ -768,13 +725,9 @@ parse_args(int argc, char **argv)
 static void
 print_ethaddr(const char *name, const struct ether_addr *eth_addr)
 {
-       printf ("%s%02X:%02X:%02X:%02X:%02X:%02X", name,
-               eth_addr->addr_bytes[0],
-               eth_addr->addr_bytes[1],
-               eth_addr->addr_bytes[2],
-               eth_addr->addr_bytes[3],
-               eth_addr->addr_bytes[4],
-               eth_addr->addr_bytes[5]);
+       char buf[ETHER_ADDR_FMT_SIZE];
+       ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
+       printf("%s%s", name, buf);
 }
 
 /* Check the link status of all ports in up to 9s, and print them finally */
@@ -809,7 +762,7 @@ check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
                                continue;
                        }
                        /* clear all_ports_up flag if any link down */
-                       if (link.link_status == 0) {
+                       if (link.link_status == ETH_LINK_DOWN) {
                                all_ports_up = 0;
                                break;
                        }
@@ -903,7 +856,7 @@ setup_port_tbl(struct lcore_queue_conf *qconf, uint32_t lcore, int socket,
        n = RTE_MAX(max_flow_num, 2UL * MAX_PKT_BURST);
        sz = sizeof (*mtb) + sizeof (mtb->m_table[0]) *  n;
 
-       if ((mtb = rte_zmalloc_socket(__func__, sz, CACHE_LINE_SIZE,
+       if ((mtb = rte_zmalloc_socket(__func__, sz, RTE_CACHE_LINE_SIZE,
                        socket)) == NULL) {
                RTE_LOG(ERR, IP_RSMBL, "%s() for lcore: %u, port: %u "
                        "failed to allocate %zu bytes\n",
@@ -973,6 +926,7 @@ init_mem(void)
        char buf[PATH_MAX];
        struct rte_lpm *lpm;
        struct rte_lpm6 *lpm6;
+       struct rte_lpm_config lpm_config;
        int socket;
        unsigned lcore_id;
 
@@ -992,7 +946,11 @@ init_mem(void)
                        RTE_LOG(INFO, IP_RSMBL, "Creating LPM table on socket %i\n", socket);
                        snprintf(buf, sizeof(buf), "IP_RSMBL_LPM_%i", socket);
 
-                       lpm = rte_lpm_create(buf, socket, LPM_MAX_RULES, 0);
+                       lpm_config.max_rules = LPM_MAX_RULES;
+                       lpm_config.number_tbl8s = 256;
+                       lpm_config.flags = 0;
+
+                       lpm = rte_lpm_create(buf, socket, &lpm_config);
                        if (lpm == NULL) {
                                RTE_LOG(ERR, IP_RSMBL, "Cannot create LPM table\n");
                                return -1;
@@ -1004,7 +962,7 @@ init_mem(void)
                        RTE_LOG(INFO, IP_RSMBL, "Creating LPM6 table on socket %i\n", socket);
                        snprintf(buf, sizeof(buf), "IP_RSMBL_LPM_%i", socket);
 
-                       lpm6 = rte_lpm6_create("IP_RSMBL_LPM6", socket, &lpm6_config);
+                       lpm6 = rte_lpm6_create(buf, socket, &lpm6_config);
                        if (lpm6 == NULL) {
                                RTE_LOG(ERR, IP_RSMBL, "Cannot create LPM table\n");
                                return -1;
@@ -1055,9 +1013,11 @@ signal_handler(int signum)
 }
 
 int
-MAIN(int argc, char **argv)
+main(int argc, char **argv)
 {
        struct lcore_queue_conf *qconf;
+       struct rte_eth_dev_info dev_info;
+       struct rte_eth_txconf *txconf;
        struct rx_queue *rxq;
        int ret, socket;
        unsigned nb_ports;
@@ -1078,13 +1038,8 @@ MAIN(int argc, char **argv)
        if (ret < 0)
                rte_exit(EXIT_FAILURE, "Invalid IP reassembly parameters\n");
 
-       if (rte_eal_pci_probe() < 0)
-               rte_exit(EXIT_FAILURE, "Cannot probe PCI\n");
-
        nb_ports = rte_eth_dev_count();
-       if (nb_ports > RTE_MAX_ETHPORTS)
-               nb_ports = RTE_MAX_ETHPORTS;
-       else if (nb_ports == 0)
+       if (nb_ports == 0)
                rte_exit(EXIT_FAILURE, "No ports found!\n");
 
        nb_lcores = rte_lcore_count();
@@ -1149,7 +1104,7 @@ MAIN(int argc, char **argv)
 
                /* init one RX queue */
                ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
-                                            socket, &rx_conf,
+                                            socket, NULL,
                                             rxq->pool);
                if (ret < 0) {
                        printf("\n");
@@ -1172,8 +1127,13 @@ MAIN(int argc, char **argv)
 
                        printf("txq=%u,%d,%d ", lcore_id, queueid, socket);
                        fflush(stdout);
+
+                       rte_eth_dev_info_get(portid, &dev_info);
+                       txconf = &dev_info.default_txconf;
+                       txconf->txq_flags = 0;
+
                        ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
-                                       socket, &tx_conf);
+                                       socket, txconf);
                        if (ret < 0)
                                rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
                                        "port=%d\n", ret, portid);