lib: fix typos
[dpdk.git] / examples / ip_reassembly / main.c
index c0f3ced..756f90e 100644 (file)
@@ -49,9 +49,7 @@
 #include <rte_log.h>
 #include <rte_memory.h>
 #include <rte_memcpy.h>
-#include <rte_memzone.h>
 #include <rte_eal.h>
-#include <rte_per_lcore.h>
 #include <rte_launch.h>
 #include <rte_atomic.h>
 #include <rte_cycles.h>
@@ -60,7 +58,6 @@
 #include <rte_per_lcore.h>
 #include <rte_branch_prediction.h>
 #include <rte_interrupts.h>
-#include <rte_pci.h>
 #include <rte_random.h>
 #include <rte_debug.h>
 #include <rte_ether.h>
 #define MAX_JUMBO_PKT_LEN  9600
 
 #define        BUF_SIZE        RTE_MBUF_DEFAULT_DATAROOM
-#define MBUF_SIZE      \
-       (BUF_SIZE + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define        MBUF_DATA_SIZE  RTE_MBUF_DEFAULT_BUF_SIZE
 
 #define NB_MBUF 8192
+#define MEMPOOL_CACHE_SIZE 256
 
 /* allow max jumbo frame 9.5 KB */
 #define JUMBO_FRAME_MAX_SIZE   0x2600
@@ -167,7 +164,7 @@ struct rx_queue {
        struct rte_mempool *pool;
        struct rte_lpm *lpm;
        struct rte_lpm6 *lpm6;
-       uint8_t portid;
+       uint16_t portid;
 };
 
 struct tx_lcore_stat {
@@ -278,7 +275,7 @@ static struct rte_lpm6 *socket_lpm6[RTE_MAX_NUMA_NODES];
  * send burst of packets on an output interface.
  */
 static inline uint32_t
-send_burst(struct lcore_queue_conf *qconf, uint32_t thresh, uint8_t port)
+send_burst(struct lcore_queue_conf *qconf, uint32_t thresh, uint16_t port)
 {
        uint32_t fill, len, k, n;
        struct mbuf_table *txmb;
@@ -308,7 +305,7 @@ send_burst(struct lcore_queue_conf *qconf, uint32_t thresh, uint8_t port)
 
 /* Enqueue a single packet, and send burst if queue is filled */
 static inline int
-send_single_packet(struct rte_mbuf *m, uint8_t port)
+send_single_packet(struct rte_mbuf *m, uint16_t port)
 {
        uint32_t fill, lcore_id, len;
        struct lcore_queue_conf *qconf;
@@ -338,7 +335,7 @@ send_single_packet(struct rte_mbuf *m, uint8_t port)
 }
 
 static inline void
-reassemble(struct rte_mbuf *m, uint8_t portid, uint32_t queue,
+reassemble(struct rte_mbuf *m, uint16_t portid, uint32_t queue,
        struct lcore_queue_conf *qconf, uint64_t tms)
 {
        struct ether_hdr *eth_hdr;
@@ -347,7 +344,7 @@ reassemble(struct rte_mbuf *m, uint8_t portid, uint32_t queue,
        struct rx_queue *rxq;
        void *d_addr_bytes;
        uint32_t next_hop;
-       uint8_t dst_port;
+       uint16_t dst_port;
 
        rxq = &qconf->rx_queue_list[queue];
 
@@ -455,7 +452,7 @@ main_loop(__attribute__((unused)) void *dummy)
        unsigned lcore_id;
        uint64_t diff_tsc, cur_tsc, prev_tsc;
        int i, j, nb_rx;
-       uint8_t portid;
+       uint16_t portid;
        struct lcore_queue_conf *qconf;
        const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
 
@@ -474,7 +471,7 @@ main_loop(__attribute__((unused)) void *dummy)
        for (i = 0; i < qconf->n_rx_queue; i++) {
 
                portid = qconf->rx_queue_list[i].portid;
-               RTE_LOG(INFO, IP_RSMBL, " -- lcoreid=%u portid=%hhu\n", lcore_id,
+               RTE_LOG(INFO, IP_RSMBL, " -- lcoreid=%u portid=%u\n", lcore_id,
                        portid);
        }
 
@@ -733,11 +730,12 @@ print_ethaddr(const char *name, const struct ether_addr *eth_addr)
 
 /* Check the link status of all ports in up to 9s, and print them finally */
 static void
-check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
 {
 #define CHECK_INTERVAL 100 /* 100ms */
 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
-       uint8_t portid, count, all_ports_up, print_flag = 0;
+       uint16_t portid;
+       uint8_t count, all_ports_up, print_flag = 0;
        struct rte_eth_link link;
 
        printf("\nChecking link status");
@@ -752,14 +750,13 @@ check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
                        /* print link status if flag set */
                        if (print_flag == 1) {
                                if (link.link_status)
-                                       printf("Port %d Link Up - speed %u "
-                                               "Mbps - %s\n", (uint8_t)portid,
-                                               (unsigned)link.link_speed,
+                                       printf(
+                                       "Port%d Link Up. Speed %u Mbps - %s\n",
+                                               portid, link.link_speed,
                                (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
                                        ("full-duplex") : ("half-duplex\n"));
                                else
-                                       printf("Port %d Link Down\n",
-                                               (uint8_t)portid);
+                                       printf("Port %d Link Down\n", portid);
                                continue;
                        }
                        /* clear all_ports_up flag if any link down */
@@ -904,17 +901,17 @@ setup_queue_tbl(struct rx_queue *rxq, uint32_t lcore, uint32_t queue)
        nb_mbuf = RTE_MAX(max_flow_num, 2UL * MAX_PKT_BURST) * MAX_FRAG_NUM;
        nb_mbuf *= (port_conf.rxmode.max_rx_pkt_len + BUF_SIZE - 1) / BUF_SIZE;
        nb_mbuf *= 2; /* ipv4 and ipv6 */
-       nb_mbuf += RTE_TEST_RX_DESC_DEFAULT + RTE_TEST_TX_DESC_DEFAULT;
+       nb_mbuf += nb_rxd + nb_txd;
 
        nb_mbuf = RTE_MAX(nb_mbuf, (uint32_t)NB_MBUF);
 
        snprintf(buf, sizeof(buf), "mbuf_pool_%u_%u", lcore, queue);
 
-       if ((rxq->pool = rte_mempool_create(buf, nb_mbuf, MBUF_SIZE, 0,
-                       sizeof(struct rte_pktmbuf_pool_private),
-                       rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL,
-                       socket, MEMPOOL_F_SP_PUT | MEMPOOL_F_SC_GET)) == NULL) {
-               RTE_LOG(ERR, IP_RSMBL, "mempool_create(%s) failed", buf);
+       rxq->pool = rte_pktmbuf_pool_create(buf, nb_mbuf, MEMPOOL_CACHE_SIZE, 0,
+                                           MBUF_DATA_SIZE, socket);
+       if (rxq->pool == NULL) {
+               RTE_LOG(ERR, IP_RSMBL,
+                       "rte_pktmbuf_pool_create(%s) failed", buf);
                return -1;
        }
 
@@ -988,7 +985,7 @@ queue_dump_stat(void)
                qconf = &lcore_queue_conf[lcore];
                for (i = 0; i < qconf->n_rx_queue; i++) {
 
-                       fprintf(stdout, " -- lcoreid=%u portid=%hhu "
+                       fprintf(stdout, " -- lcoreid=%u portid=%u "
                                "frag tbl stat:\n",
                                lcore,  qconf->rx_queue_list[i].portid);
                        rte_ip_frag_table_statistics_dump(stdout,
@@ -1025,7 +1022,7 @@ main(int argc, char **argv)
        uint16_t queueid;
        unsigned lcore_id = 0, rx_lcore_id = 0;
        uint32_t n_tx_queue, nb_lcores;
-       uint8_t portid;
+       uint16_t portid;
 
        /* init EAL */
        ret = rte_eal_init(argc, argv);
@@ -1088,6 +1085,14 @@ main(int argc, char **argv)
                rxq->portid = portid;
                rxq->lpm = socket_lpm[socket];
                rxq->lpm6 = socket_lpm6[socket];
+
+               ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
+                                                      &nb_txd);
+               if (ret < 0)
+                       rte_exit(EXIT_FAILURE,
+                                "Cannot adjust number of descriptors: err=%d, port=%d\n",
+                                ret, portid);
+
                if (setup_queue_tbl(rxq, rx_lcore_id, queueid) < 0)
                        rte_exit(EXIT_FAILURE, "Failed to set up queue table\n");
                qconf->n_rx_queue++;
@@ -1170,7 +1175,7 @@ main(int argc, char **argv)
        if (init_routing_table() < 0)
                rte_exit(EXIT_FAILURE, "Cannot init routing table\n");
 
-       check_all_ports_link_status((uint8_t)nb_ports, enabled_port_mask);
+       check_all_ports_link_status(nb_ports, enabled_port_mask);
 
        signal(SIGUSR1, signal_handler);
        signal(SIGTERM, signal_handler);