#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_memzone.h>
-#include <rte_tailq.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
-#include <rte_ring.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_malloc.h>
#include <rte_ip_frag.h>
-#include "main.h"
-
#define MAX_PKT_BURST 32
#define MAX_JUMBO_PKT_LEN 9600
-#define BUF_SIZE 2048
+#define BUF_SIZE RTE_MBUF_DEFAULT_DATAROOM
#define MBUF_SIZE \
(BUF_SIZE + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
static uint32_t max_flow_num = DEF_FLOW_NUM;
static uint32_t max_flow_ttl = DEF_FLOW_TTL;
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-#define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */
-#define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */
-#define RX_WTHRESH 4 /**< Default values of RX write-back threshold reg. */
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-#define TX_PTHRESH 36 /**< Default values of TX prefetch threshold reg. */
-#define TX_HTHRESH 0 /**< Default values of TX host threshold reg. */
-#define TX_WTHRESH 0 /**< Default values of TX write-back threshold reg. */
-
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
#define NB_SOCKETS 8
},
};
-static const struct rte_eth_rxconf rx_conf = {
- .rx_thresh = {
- .pthresh = RX_PTHRESH,
- .hthresh = RX_HTHRESH,
- .wthresh = RX_WTHRESH,
- },
- .rx_free_thresh = 32,
-};
-
-static const struct rte_eth_txconf tx_conf = {
- .tx_thresh = {
- .pthresh = TX_PTHRESH,
- .hthresh = TX_HTHRESH,
- .wthresh = TX_WTHRESH,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
- .txq_flags = 0x0,
-};
-
/*
* IPv4 forwarding table
*/
txmb->tail = 0;
}
- return (fill);
+ return fill;
}
/* Enqueue a single packet, and send burst if queue is filled */
if(++txmb->head == len)
txmb->head = 0;
- return (0);
+ return 0;
}
static inline void
struct rte_ip_frag_death_row *dr;
struct rx_queue *rxq;
void *d_addr_bytes;
- uint8_t next_hop, dst_port;
+ uint32_t next_hop_ipv4;
+ uint8_t next_hop_ipv6, dst_port;
rxq = &qconf->rx_queue_list[queue];
dst_port = portid;
/* if packet is IPv4 */
- if (m->ol_flags & (PKT_RX_IPV4_HDR)) {
+ if (RTE_ETH_IS_IPV4_HDR(m->packet_type)) {
struct ipv4_hdr *ip_hdr;
uint32_t ip_dst;
ip_dst = rte_be_to_cpu_32(ip_hdr->dst_addr);
/* Find destination port */
- if (rte_lpm_lookup(rxq->lpm, ip_dst, &next_hop) == 0 &&
- (enabled_port_mask & 1 << next_hop) != 0) {
- dst_port = next_hop;
+ if (rte_lpm_lookup(rxq->lpm, ip_dst, &next_hop_ipv4) == 0 &&
+ (enabled_port_mask & 1 << next_hop_ipv4) != 0) {
+ dst_port = next_hop_ipv4;
}
eth_hdr->ether_type = rte_be_to_cpu_16(ETHER_TYPE_IPv4);
- }
- /* if packet is IPv6 */
- else if (m->ol_flags & (PKT_RX_IPV6_HDR | PKT_RX_IPV6_HDR_EXT)) {
+ } else if (RTE_ETH_IS_IPV6_HDR(m->packet_type)) {
+ /* if packet is IPv6 */
struct ipv6_extension_fragment *frag_hdr;
struct ipv6_hdr *ip_hdr;
}
/* Find destination port */
- if (rte_lpm6_lookup(rxq->lpm6, ip_hdr->dst_addr, &next_hop) == 0 &&
- (enabled_port_mask & 1 << next_hop) != 0) {
- dst_port = next_hop;
+ if (rte_lpm6_lookup(rxq->lpm6, ip_hdr->dst_addr, &next_hop_ipv6) == 0 &&
+ (enabled_port_mask & 1 << next_hop_ipv6) != 0) {
+ dst_port = next_hop_ipv6;
}
eth_hdr->ether_type = rte_be_to_cpu_16(ETHER_TYPE_IPv6);
errno = 0;
v = strtoul(str, &end, 10);
if (errno != 0 || *end != '\0')
- return (-EINVAL);
+ return -EINVAL;
if (v < min || v > max)
- return (-EINVAL);
+ return -EINVAL;
*val = (uint32_t)v;
- return (0);
+ return 0;
}
static int
errno = 0;
v = strtoul(str, &end, 10);
if (errno != 0)
- return (-EINVAL);
+ return -EINVAL;
if (*end != '\0') {
if (strncmp(frmt_sec, end, sizeof(frmt_sec)) == 0)
v *= MS_PER_S;
else if (strncmp(frmt_msec, end, sizeof (frmt_msec)) != 0)
- return (-EINVAL);
+ return -EINVAL;
}
if (v < min || v > max)
- return (-EINVAL);
+ return -EINVAL;
*val = (uint32_t)v;
- return (0);
+ return 0;
}
static int
optarg,
lgopts[option_index].name);
print_usage(prgname);
- return (ret);
+ return ret;
}
}
optarg,
lgopts[option_index].name);
print_usage(prgname);
- return (ret);
+ return ret;
}
}
argv[optind-1] = prgname;
ret = optind-1;
- optind = 0; /* reset getopt lib */
+ optind = 1; /* reset getopt lib */
return ret;
}
static void
print_ethaddr(const char *name, const struct ether_addr *eth_addr)
{
- printf ("%s%02X:%02X:%02X:%02X:%02X:%02X", name,
- eth_addr->addr_bytes[0],
- eth_addr->addr_bytes[1],
- eth_addr->addr_bytes[2],
- eth_addr->addr_bytes[3],
- eth_addr->addr_bytes[4],
- eth_addr->addr_bytes[5]);
+ char buf[ETHER_ADDR_FMT_SIZE];
+ ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
+ printf("%s%s", name, buf);
}
/* Check the link status of all ports in up to 9s, and print them finally */
continue;
}
/* clear all_ports_up flag if any link down */
- if (link.link_status == 0) {
+ if (link.link_status == ETH_LINK_DOWN) {
all_ports_up = 0;
break;
}
n = RTE_MAX(max_flow_num, 2UL * MAX_PKT_BURST);
sz = sizeof (*mtb) + sizeof (mtb->m_table[0]) * n;
- if ((mtb = rte_zmalloc_socket(__func__, sz, CACHE_LINE_SIZE,
+ if ((mtb = rte_zmalloc_socket(__func__, sz, RTE_CACHE_LINE_SIZE,
socket)) == NULL) {
RTE_LOG(ERR, IP_RSMBL, "%s() for lcore: %u, port: %u "
"failed to allocate %zu bytes\n",
char buf[PATH_MAX];
struct rte_lpm *lpm;
struct rte_lpm6 *lpm6;
+ struct rte_lpm_config lpm_config;
int socket;
unsigned lcore_id;
RTE_LOG(INFO, IP_RSMBL, "Creating LPM table on socket %i\n", socket);
snprintf(buf, sizeof(buf), "IP_RSMBL_LPM_%i", socket);
- lpm = rte_lpm_create(buf, socket, LPM_MAX_RULES, 0);
+ lpm_config.max_rules = LPM_MAX_RULES;
+ lpm_config.number_tbl8s = 256;
+ lpm_config.flags = 0;
+
+ lpm = rte_lpm_create(buf, socket, &lpm_config);
if (lpm == NULL) {
RTE_LOG(ERR, IP_RSMBL, "Cannot create LPM table\n");
return -1;
RTE_LOG(INFO, IP_RSMBL, "Creating LPM6 table on socket %i\n", socket);
snprintf(buf, sizeof(buf), "IP_RSMBL_LPM_%i", socket);
- lpm6 = rte_lpm6_create("IP_RSMBL_LPM6", socket, &lpm6_config);
+ lpm6 = rte_lpm6_create(buf, socket, &lpm6_config);
if (lpm6 == NULL) {
RTE_LOG(ERR, IP_RSMBL, "Cannot create LPM table\n");
return -1;
}
int
-MAIN(int argc, char **argv)
+main(int argc, char **argv)
{
struct lcore_queue_conf *qconf;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_txconf *txconf;
struct rx_queue *rxq;
int ret, socket;
unsigned nb_ports;
rte_exit(EXIT_FAILURE, "Invalid IP reassembly parameters\n");
nb_ports = rte_eth_dev_count();
- if (nb_ports > RTE_MAX_ETHPORTS)
- nb_ports = RTE_MAX_ETHPORTS;
- else if (nb_ports == 0)
+ if (nb_ports == 0)
rte_exit(EXIT_FAILURE, "No ports found!\n");
nb_lcores = rte_lcore_count();
/* init one RX queue */
ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
- socket, &rx_conf,
+ socket, NULL,
rxq->pool);
if (ret < 0) {
printf("\n");
printf("txq=%u,%d,%d ", lcore_id, queueid, socket);
fflush(stdout);
+
+ rte_eth_dev_info_get(portid, &dev_info);
+ txconf = &dev_info.default_txconf;
+ txconf->txq_flags = 0;
+
ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
- socket, &tx_conf);
+ socket, txconf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
"port=%d\n", ret, portid);