#include "ipsec.h"
#include "parser.h"
+#include "sad.h"
#define RTE_LOGTYPE_IPSEC RTE_LOGTYPE_USER1
0, 0)
#define FRAG_TBL_BUCKET_ENTRIES 4
-#define FRAG_TTL_MS (10 * MS_PER_S)
+#define MAX_FRAG_TTL_NS (10LL * NS_PER_S)
#define MTU_TO_FRAMELEN(x) ((x) + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN)
#define CMD_LINE_OPT_TX_OFFLOAD "txoffload"
#define CMD_LINE_OPT_REASSEMBLE "reassemble"
#define CMD_LINE_OPT_MTU "mtu"
+#define CMD_LINE_OPT_FRAG_TTL "frag-ttl"
enum {
/* long options mapped to a short option */
CMD_LINE_OPT_TX_OFFLOAD_NUM,
CMD_LINE_OPT_REASSEMBLE_NUM,
CMD_LINE_OPT_MTU_NUM,
+ CMD_LINE_OPT_FRAG_TTL_NUM,
};
static const struct option lgopts[] = {
{CMD_LINE_OPT_TX_OFFLOAD, 1, 0, CMD_LINE_OPT_TX_OFFLOAD_NUM},
{CMD_LINE_OPT_REASSEMBLE, 1, 0, CMD_LINE_OPT_REASSEMBLE_NUM},
{CMD_LINE_OPT_MTU, 1, 0, CMD_LINE_OPT_MTU_NUM},
+ {CMD_LINE_OPT_FRAG_TTL, 1, 0, CMD_LINE_OPT_FRAG_TTL_NUM},
{NULL, 0, 0, 0}
};
static uint32_t frag_tbl_sz;
static uint32_t frame_buf_size = RTE_MBUF_DEFAULT_BUF_SIZE;
static uint32_t mtu_size = RTE_ETHER_MTU;
+static uint64_t frag_ttl_ns = MAX_FRAG_TTL_NS;
/* application wide librte_ipsec/SA parameters */
-struct app_sa_prm app_sa_prm = {.enable = 0};
+struct app_sa_prm app_sa_prm = {
+ .enable = 0,
+ .cache_sz = SA_CACHE_SZ
+ };
+static const char *cfgfile;
struct lcore_rx_queue {
uint16_t port_id;
}
pkt->l2_len = 0;
pkt->l3_len = sizeof(*iph4);
+ pkt->packet_type |= RTE_PTYPE_L3_IPV4;
} else if (eth->ether_type == rte_cpu_to_be_16(RTE_ETHER_TYPE_IPV6)) {
int next_proto;
size_t l3len, ext_len;
}
pkt->l2_len = 0;
pkt->l3_len = l3len;
+ pkt->packet_type |= RTE_PTYPE_L3_IPV6;
} else {
/* Unknown/Unsupported type, drop the packet */
RTE_LOG(ERR, IPSEC, "Unsupported packet type 0x%x\n",
rte_be_to_cpu_16(eth->ether_type));
rte_pktmbuf_free(pkt);
+ return;
}
/* Check if the packet has been processed inline. For inline protocol
len++;
/* need to fragment the packet */
- } else
+ } else if (frag_tbl_sz > 0)
len = send_fragment_packet(qconf, m, port, proto);
+ else
+ rte_pktmbuf_free(m);
/* enough pkts to be sent */
if (unlikely(len == MAX_PKT_BURST)) {
continue;
}
- sa_idx = SPI2IDX(res);
+ sa_idx = res - 1;
if (!inbound_sa_check(sa, m, sa_idx)) {
rte_pktmbuf_free(m);
continue;
j = 0;
for (i = 0; i < ip->num; i++) {
m = ip->pkts[i];
- sa_idx = SPI2IDX(ip->res[i]);
+ sa_idx = ip->res[i] - 1;
if (ip->res[i] == DISCARD)
rte_pktmbuf_free(m);
else if (ip->res[i] == BYPASS)
uint16_t portid;
uint8_t queueid;
struct lcore_conf *qconf;
- int32_t socket_id;
+ int32_t rc, socket_id;
const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1)
/ US_PER_S * BURST_TX_DRAIN_US;
struct lcore_rx_queue *rxql;
qconf->frag.pool_dir = socket_ctx[socket_id].mbuf_pool;
qconf->frag.pool_indir = socket_ctx[socket_id].mbuf_pool_indir;
+ rc = ipsec_sad_lcore_cache_init(app_sa_prm.cache_sz);
+ if (rc != 0) {
+ RTE_LOG(ERR, IPSEC,
+ "SAD cache init on lcore %u, failed with code: %d\n",
+ lcore_id, rc);
+ return rc;
+ }
+
if (qconf->nb_rx_queue == 0) {
RTE_LOG(DEBUG, IPSEC, "lcore %u has nothing to do\n",
lcore_id);
" [-w REPLAY_WINDOW_SIZE]"
" [-e]"
" [-a]"
+ " [-c]"
" -f CONFIG_FILE"
" --config (port,queue,lcore)[,(port,queue,lcore)]"
" [--single-sa SAIDX]"
" size for each SA\n"
" -e enables ESN\n"
" -a enables SA SQN atomic behaviour\n"
+ " -c specifies inbound SAD cache size,\n"
+ " zero value disables the cache (default value: 128)\n"
" -f CONFIG_FILE: Configuration file\n"
" --config (port,queue,lcore): Rx queue configuration\n"
" --single-sa SAIDX: Use single SA index for outbound traffic,\n"
": MTU value on all ports (default value: 1500)\n"
" outgoing packets with bigger size will be fragmented\n"
" incoming packets with bigger size will be discarded\n"
+ " --" CMD_LINE_OPT_FRAG_TTL " FRAG_TTL_NS"
+ ": fragments lifetime in nanoseconds, default\n"
+ " and maximum value is 10.000.000.000 ns (10 s)\n"
"\n",
prgname);
}
return pm;
}
-static int32_t
+static int64_t
parse_decimal(const char *str)
{
char *end = NULL;
- unsigned long num;
+ uint64_t num;
- num = strtoul(str, &end, 10);
- if ((str[0] == '\0') || (end == NULL) || (*end != '\0'))
+ num = strtoull(str, &end, 10);
+ if ((str[0] == '\0') || (end == NULL) || (*end != '\0')
+ || num > INT64_MAX)
return -1;
return num;
printf("librte_ipsec usage: %s\n",
(prm->enable == 0) ? "disabled" : "enabled");
- if (prm->enable == 0)
- return;
-
printf("replay window size: %u\n", prm->window_size);
printf("ESN: %s\n", (prm->enable_esn == 0) ? "disabled" : "enabled");
printf("SA flags: %#" PRIx64 "\n", prm->flags);
+ printf("Frag TTL: %" PRIu64 " ns\n", frag_ttl_ns);
}
static int32_t
parse_args(int32_t argc, char **argv)
{
- int32_t opt, ret;
+ int opt;
+ int64_t ret;
char **argvopt;
int32_t option_index;
char *prgname = argv[0];
argvopt = argv;
- while ((opt = getopt_long(argc, argvopt, "aelp:Pu:f:j:w:",
+ while ((opt = getopt_long(argc, argvopt, "aelp:Pu:f:j:w:c:",
lgopts, &option_index)) != EOF) {
switch (opt) {
print_usage(prgname);
return -1;
}
- if (parse_cfg_file(optarg) < 0) {
- printf("parsing file \"%s\" failed\n",
- optarg);
- print_usage(prgname);
- return -1;
- }
+ cfgfile = optarg;
f_present = 1;
break;
case 'j':
app_sa_prm.enable = 1;
break;
case 'w':
- app_sa_prm.enable = 1;
app_sa_prm.window_size = parse_decimal(optarg);
break;
case 'e':
- app_sa_prm.enable = 1;
app_sa_prm.enable_esn = 1;
break;
case 'a':
app_sa_prm.enable = 1;
app_sa_prm.flags |= RTE_IPSEC_SAFLAG_SQN_ATOM;
break;
+ case 'c':
+ ret = parse_decimal(optarg);
+ if (ret < 0) {
+ printf("Invalid SA cache size: %s\n", optarg);
+ print_usage(prgname);
+ return -1;
+ }
+ app_sa_prm.cache_sz = ret;
+ break;
case CMD_LINE_OPT_CONFIG_NUM:
ret = parse_config(optarg);
if (ret) {
break;
case CMD_LINE_OPT_SINGLE_SA_NUM:
ret = parse_decimal(optarg);
- if (ret == -1) {
+ if (ret == -1 || ret > UINT32_MAX) {
printf("Invalid argument[sa_idx]\n");
print_usage(prgname);
return -1;
break;
case CMD_LINE_OPT_REASSEMBLE_NUM:
ret = parse_decimal(optarg);
- if (ret < 0) {
+ if (ret < 0 || ret > UINT32_MAX) {
printf("Invalid argument for \'%s\': %s\n",
CMD_LINE_OPT_REASSEMBLE, optarg);
print_usage(prgname);
}
mtu_size = ret;
break;
+ case CMD_LINE_OPT_FRAG_TTL_NUM:
+ ret = parse_decimal(optarg);
+ if (ret < 0 || ret > MAX_FRAG_TTL_NS) {
+ printf("Invalid argument for \'%s\': %s\n",
+ CMD_LINE_OPT_MTU, optarg);
+ print_usage(prgname);
+ return -1;
+ }
+ frag_ttl_ns = ret;
+ break;
default:
print_usage(prgname);
return -1;
uint16_t portid;
uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
+ int ret;
printf("\nChecking link status");
fflush(stdout);
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
- rte_eth_link_get_nowait(portid, &link);
+ ret = rte_eth_link_get_nowait(portid, &link);
+ if (ret < 0) {
+ all_ports_up = 0;
+ if (print_flag == 1)
+ printf("Port %u link get failed: %s\n",
+ portid, rte_strerror(-ret));
+ continue;
+ }
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
struct rte_cryptodev_config dev_conf;
struct rte_cryptodev_qp_conf qp_conf;
uint16_t idx, max_nb_qps, qp, i;
- int16_t cdev_id, port_id;
+ int16_t cdev_id;
struct rte_hash_parameters params = { 0 };
const uint64_t mseg_flag = multi_seg_required() ?
printf("lcore/cryptodev/qp mappings:\n");
- uint32_t max_sess_sz = 0, sess_sz;
- for (cdev_id = 0; cdev_id < rte_cryptodev_count(); cdev_id++) {
- void *sec_ctx;
-
- /* Get crypto priv session size */
- sess_sz = rte_cryptodev_sym_get_private_session_size(cdev_id);
- if (sess_sz > max_sess_sz)
- max_sess_sz = sess_sz;
-
- /*
- * If crypto device is security capable, need to check the
- * size of security session as well.
- */
-
- /* Get security context of the crypto device */
- sec_ctx = rte_cryptodev_get_sec_ctx(cdev_id);
- if (sec_ctx == NULL)
- continue;
-
- /* Get size of security session */
- sess_sz = rte_security_session_get_size(sec_ctx);
- if (sess_sz > max_sess_sz)
- max_sess_sz = sess_sz;
- }
- RTE_ETH_FOREACH_DEV(port_id) {
- void *sec_ctx;
-
- if ((enabled_port_mask & (1 << port_id)) == 0)
- continue;
-
- sec_ctx = rte_eth_dev_get_sec_ctx(port_id);
- if (sec_ctx == NULL)
- continue;
-
- sess_sz = rte_security_session_get_size(sec_ctx);
- if (sess_sz > max_sess_sz)
- max_sess_sz = sess_sz;
- }
-
idx = 0;
for (cdev_id = 0; cdev_id < rte_cryptodev_count(); cdev_id++) {
struct rte_cryptodev_info cdev_info;
"Device does not support at least %u "
"sessions", CDEV_MP_NB_OBJS);
- if (!socket_ctx[dev_conf.socket_id].session_pool) {
- char mp_name[RTE_MEMPOOL_NAMESIZE];
- struct rte_mempool *sess_mp;
-
- snprintf(mp_name, RTE_MEMPOOL_NAMESIZE,
- "sess_mp_%u", dev_conf.socket_id);
- sess_mp = rte_cryptodev_sym_session_pool_create(
- mp_name, CDEV_MP_NB_OBJS,
- 0, CDEV_MP_CACHE_SZ, 0,
- dev_conf.socket_id);
- socket_ctx[dev_conf.socket_id].session_pool = sess_mp;
- }
-
- if (!socket_ctx[dev_conf.socket_id].session_priv_pool) {
- char mp_name[RTE_MEMPOOL_NAMESIZE];
- struct rte_mempool *sess_mp;
-
- snprintf(mp_name, RTE_MEMPOOL_NAMESIZE,
- "sess_mp_priv_%u", dev_conf.socket_id);
- sess_mp = rte_mempool_create(mp_name,
- CDEV_MP_NB_OBJS,
- max_sess_sz,
- CDEV_MP_CACHE_SZ,
- 0, NULL, NULL, NULL,
- NULL, dev_conf.socket_id,
- 0);
- socket_ctx[dev_conf.socket_id].session_priv_pool =
- sess_mp;
- }
-
- if (!socket_ctx[dev_conf.socket_id].session_priv_pool ||
- !socket_ctx[dev_conf.socket_id].session_pool)
- rte_exit(EXIT_FAILURE,
- "Cannot create session pool on socket %d\n",
- dev_conf.socket_id);
- else
- printf("Allocated session pool on socket %d\n",
- dev_conf.socket_id);
-
if (rte_cryptodev_configure(cdev_id, &dev_conf))
rte_panic("Failed to initialize cryptodev %u\n",
cdev_id);
cdev_id);
}
- /* create session pools for eth devices that implement security */
- RTE_ETH_FOREACH_DEV(port_id) {
- if ((enabled_port_mask & (1 << port_id)) &&
- rte_eth_dev_get_sec_ctx(port_id)) {
- int socket_id = rte_eth_dev_socket_id(port_id);
-
- if (!socket_ctx[socket_id].session_priv_pool) {
- char mp_name[RTE_MEMPOOL_NAMESIZE];
- struct rte_mempool *sess_mp;
-
- snprintf(mp_name, RTE_MEMPOOL_NAMESIZE,
- "sess_mp_%u", socket_id);
- sess_mp = rte_mempool_create(mp_name,
- (CDEV_MP_NB_OBJS * 2),
- max_sess_sz,
- CDEV_MP_CACHE_SZ,
- 0, NULL, NULL, NULL,
- NULL, socket_id,
- 0);
- if (sess_mp == NULL)
- rte_exit(EXIT_FAILURE,
- "Cannot create session pool "
- "on socket %d\n", socket_id);
- else
- printf("Allocated session pool "
- "on socket %d\n", socket_id);
- socket_ctx[socket_id].session_priv_pool =
- sess_mp;
- }
- }
- }
-
-
printf("\n");
return 0;
struct rte_ether_addr ethaddr;
struct rte_eth_conf local_port_conf = port_conf;
- rte_eth_dev_info_get(portid, &dev_info);
+ ret = rte_eth_dev_info_get(portid, &dev_info);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error during getting device (port %u) info: %s\n",
+ portid, strerror(-ret));
/* limit allowed HW offloafs, as user requested */
dev_info.rx_offload_capa &= dev_rx_offload;
printf("Configuring device port %u:\n", portid);
- rte_eth_macaddr_get(portid, ðaddr);
+ ret = rte_eth_macaddr_get(portid, ðaddr);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error getting MAC address (port %u): %s\n",
+ portid, rte_strerror(-ret));
+
ethaddr_tbl[portid].src = ETHADDR_TO_UINT64(ðaddr);
print_ethaddr("Address: ", ðaddr);
printf("\n");
printf("\n");
}
+static size_t
+max_session_size(void)
+{
+ size_t max_sz, sz;
+ void *sec_ctx;
+ int16_t cdev_id, port_id, n;
+
+ max_sz = 0;
+ n = rte_cryptodev_count();
+ for (cdev_id = 0; cdev_id != n; cdev_id++) {
+ sz = rte_cryptodev_sym_get_private_session_size(cdev_id);
+ if (sz > max_sz)
+ max_sz = sz;
+ /*
+ * If crypto device is security capable, need to check the
+ * size of security session as well.
+ */
+
+ /* Get security context of the crypto device */
+ sec_ctx = rte_cryptodev_get_sec_ctx(cdev_id);
+ if (sec_ctx == NULL)
+ continue;
+
+ /* Get size of security session */
+ sz = rte_security_session_get_size(sec_ctx);
+ if (sz > max_sz)
+ max_sz = sz;
+ }
+
+ RTE_ETH_FOREACH_DEV(port_id) {
+ if ((enabled_port_mask & (1 << port_id)) == 0)
+ continue;
+
+ sec_ctx = rte_eth_dev_get_sec_ctx(port_id);
+ if (sec_ctx == NULL)
+ continue;
+
+ sz = rte_security_session_get_size(sec_ctx);
+ if (sz > max_sz)
+ max_sz = sz;
+ }
+
+ return max_sz;
+}
+
+static void
+session_pool_init(struct socket_ctx *ctx, int32_t socket_id, size_t sess_sz)
+{
+ char mp_name[RTE_MEMPOOL_NAMESIZE];
+ struct rte_mempool *sess_mp;
+
+ snprintf(mp_name, RTE_MEMPOOL_NAMESIZE,
+ "sess_mp_%u", socket_id);
+ sess_mp = rte_cryptodev_sym_session_pool_create(
+ mp_name, CDEV_MP_NB_OBJS,
+ sess_sz, CDEV_MP_CACHE_SZ, 0,
+ socket_id);
+ ctx->session_pool = sess_mp;
+
+ if (ctx->session_pool == NULL)
+ rte_exit(EXIT_FAILURE,
+ "Cannot init session pool on socket %d\n", socket_id);
+ else
+ printf("Allocated session pool on socket %d\n", socket_id);
+}
+
+static void
+session_priv_pool_init(struct socket_ctx *ctx, int32_t socket_id,
+ size_t sess_sz)
+{
+ char mp_name[RTE_MEMPOOL_NAMESIZE];
+ struct rte_mempool *sess_mp;
+
+ snprintf(mp_name, RTE_MEMPOOL_NAMESIZE,
+ "sess_mp_priv_%u", socket_id);
+ sess_mp = rte_mempool_create(mp_name,
+ CDEV_MP_NB_OBJS,
+ sess_sz,
+ CDEV_MP_CACHE_SZ,
+ 0, NULL, NULL, NULL,
+ NULL, socket_id,
+ 0);
+ ctx->session_priv_pool = sess_mp;
+
+ if (ctx->session_priv_pool == NULL)
+ rte_exit(EXIT_FAILURE,
+ "Cannot init session priv pool on socket %d\n",
+ socket_id);
+ else
+ printf("Allocated session priv pool on socket %d\n",
+ socket_id);
+}
+
static void
pool_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t nb_mbuf)
{
/* create fragment table */
sid = rte_lcore_to_socket_id(cid);
- frag_cycles = (rte_get_tsc_hz() + MS_PER_S - 1) /
- MS_PER_S * FRAG_TTL_MS;
+ frag_cycles = (rte_get_tsc_hz() + NS_PER_S - 1) /
+ NS_PER_S * frag_ttl_ns;
lc->frag.tbl = rte_ip_frag_table_create(frag_tbl_sz,
FRAG_TBL_BUCKET_ENTRIES, frag_tbl_sz, frag_cycles, sid);
{
int32_t ret;
uint32_t lcore_id;
+ uint32_t i;
uint8_t socket_id;
uint16_t portid;
uint64_t req_rx_offloads, req_tx_offloads;
+ size_t sess_sz;
/* init EAL */
ret = rte_eal_init(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid parameters\n");
+ /* parse configuration file */
+ if (parse_cfg_file(cfgfile) < 0) {
+ printf("parsing file \"%s\" failed\n",
+ optarg);
+ print_usage(argv[0]);
+ return -1;
+ }
+
if ((unprotected_port_mask & enabled_port_mask) !=
unprotected_port_mask)
rte_exit(EXIT_FAILURE, "Invalid unprotected portmask 0x%x\n",
nb_lcores = rte_lcore_count();
- /* Replicate each context per socket */
+ sess_sz = max_session_size();
+
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
if (rte_lcore_is_enabled(lcore_id) == 0)
continue;
else
socket_id = 0;
+ /* mbuf_pool is initialised by the pool_init() function*/
if (socket_ctx[socket_id].mbuf_pool)
continue;
- /* initilaze SPD */
- sp4_init(&socket_ctx[socket_id], socket_id);
-
- sp6_init(&socket_ctx[socket_id], socket_id);
-
- /* initilaze SAD */
- sa_init(&socket_ctx[socket_id], socket_id);
-
- rt_init(&socket_ctx[socket_id], socket_id);
-
pool_init(&socket_ctx[socket_id], socket_id, NB_MBUF);
+ session_pool_init(&socket_ctx[socket_id], socket_id, sess_sz);
+ session_priv_pool_init(&socket_ctx[socket_id], socket_id,
+ sess_sz);
}
RTE_ETH_FOREACH_DEV(portid) {
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
- /* Start device */
+ /*
+ * Start device
+ * note: device must be started before a flow rule
+ * can be installed.
+ */
ret = rte_eth_dev_start(portid);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_dev_start: "
* to itself through 2 cross-connected ports of the
* target machine.
*/
- if (promiscuous_on)
- rte_eth_promiscuous_enable(portid);
+ if (promiscuous_on) {
+ ret = rte_eth_promiscuous_enable(portid);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_promiscuous_enable: err=%s, port=%d\n",
+ rte_strerror(-ret), portid);
+ }
rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_IPSEC, inline_ipsec_event_callback, NULL);
rte_exit(EXIT_FAILURE, "failed at reassemble init");
}
+ /* Replicate each context per socket */
+ for (i = 0; i < NB_SOCKETS && i < rte_socket_count(); i++) {
+ socket_id = rte_socket_id_by_idx(i);
+ if ((socket_ctx[socket_id].mbuf_pool != NULL) &&
+ (socket_ctx[socket_id].sa_in == NULL) &&
+ (socket_ctx[socket_id].sa_out == NULL)) {
+ sa_init(&socket_ctx[socket_id], socket_id);
+ sp4_init(&socket_ctx[socket_id], socket_id);
+ sp6_init(&socket_ctx[socket_id], socket_id);
+ rt_init(&socket_ctx[socket_id], socket_id);
+ }
+ }
+
check_all_ports_link_status(enabled_port_mask);
/* launch per-lcore init on every lcore */
git.droids-corp.org / dpdk.git / blobdiff