#! /bin/bash
+# SPDX-License-Identifier: BSD-3-Clause
-# usage: /bin/bash run_test.sh [-46]
-# Run all defined linux_test[4,6].sh test-cases one by one
-# user has to setup properly the following environment variables:
-# SGW_PATH - path to the ipsec-secgw binary to test
-# REMOTE_HOST - ip/hostname of the DUT
-# REMOTE_IFACE - iface name for the test-port on DUT
-# ETH_DEV - ethernet device to be used on SUT by DPDK ('-w <pci-id>')
-# Also user can optonally setup:
-# SGW_LCORE - lcore to run ipsec-secgw on (default value is 0)
-# CRYPTO_DEV - crypto device to be used ('-w <pci-id>')
-# if none specified appropriate vdevs will be created by the scrit
-# refer to linux_test1.sh for more information
-
-# All supported modes to test.
-# naming convention:
-# 'old' means that ipsec-secgw will run in legacy (non-librte_ipsec mode)
+# Usage: /bin/bash run_test.sh [-46miflscph] <ipsec_mode>
+# Run all defined linux_test.sh test-cases one by one
+# If <ipsec_mode> is specified, run only that test case
+# User has to setup properly the following environment variables:
+# SGW_PATH - path to the ipsec-secgw binary to test
+# REMOTE_HOST - ip/hostname of the DUT
+# REMOTE_IFACE - iface name for the test-port on DUT
+# ETH_DEV - ethernet device to be used on SUT by DPDK ('-w <pci-id>')
+# Also user can optionally setup:
+# SGW_LCORE - lcore to run ipsec-secgw on (default value is 0)
+# CRYPTO_DEV - crypto device to be used ('-w <pci-id>')
+# if none specified appropriate vdevs will be created by the script
+# SGW_MULTI_SEG - ipsec-secgw option to enable reassembly support and
+# specify size of reassembly table (i.e. SGW_MULTI_SEG=128)
+# Refer to linux_test.sh for more information
+
+# All supported modes to test:
+# trs_3descbc_sha1
+# trs_aescbc_sha1
+# trs_aesctr_sha1
+# trs_aesgcm
+# tun_3descbc_sha1
+# tun_aescbc_sha1
+# tun_aesctr_sha1
+# tun_aesgcm
+# Naming convention:
# 'tun/trs' refer to tunnel/transport mode respectively
usage()
{
echo "Usage:"
- echo -e "\t$0 -[46p]"
+ echo -e "\t$0 -[46miflscph] <ipsec_mode>"
echo -e "\t\t-4 Perform Linux IPv4 network tests"
echo -e "\t\t-6 Perform Linux IPv6 network tests"
+ echo -e "\t\t-m Add mixed IP protocol tests to IPv4/IPv6 \
+(only with option [-46])"
+ echo -e "\t\t-i Run inline tests (only with option [-46])"
+ echo -e "\t\t-f Run fallback tests (only with option [-46])"
+ echo -e "\t\t-l Run tests in legacy mode"
+ echo -e "\t\t-s Run all tests with reassembly support \
+(on default only fallback tests use reassembly support)"
+ echo -e "\t\t-c Run tests with use of cpu-crypto \
+(on default lookaside-none is used)"
echo -e "\t\t-p Perform packet validation tests"
echo -e "\t\t-h Display this help"
+ echo -e "\t\t<ipsec_mode> Run only specified test case i.e. tun_aesgcm"
}
-LINUX_TEST="tun_aescbc_sha1 \
-tun_aescbc_sha1_esn \
-tun_aescbc_sha1_esn_atom \
-tun_aesgcm \
-tun_aesgcm_esn \
-tun_aesgcm_esn_atom \
+LINUX_TEST="trs_3descbc_sha1 \
trs_aescbc_sha1 \
-trs_aescbc_sha1_esn \
-trs_aescbc_sha1_esn_atom \
-trs_aesgcm \
-trs_aesgcm_esn \
-trs_aesgcm_esn_atom \
-tun_aescbc_sha1_old \
-tun_aesgcm_old \
-trs_aescbc_sha1_old \
-trs_aesgcm_old \
-tun_aesctr_sha1 \
-tun_aesctr_sha1_old \
-tun_aesctr_sha1_esn \
-tun_aesctr_sha1_esn_atom \
trs_aesctr_sha1 \
-trs_aesctr_sha1_old \
-trs_aesctr_sha1_esn \
-trs_aesctr_sha1_esn_atom \
+trs_aesgcm \
tun_3descbc_sha1 \
-tun_3descbc_sha1_old \
-tun_3descbc_sha1_esn \
-tun_3descbc_sha1_esn_atom \
-trs_3descbc_sha1 \
-trs_3descbc_sha1_old \
-trs_3descbc_sha1_esn \
-trs_3descbc_sha1_esn_atom"
+tun_aescbc_sha1 \
+tun_aesctr_sha1 \
+tun_aesgcm"
-PKT_TESTS="trs_ipv6opts"
+LINUX_TEST_INLINE_FALLBACK="trs_aesgcm \
+tun_aesgcm"
+
+LINUX_TEST_RUN=""
+
+PKT_TESTS="trs_ipv6opts \
+tun_null_header_reconstruct"
DIR=$(dirname $0)
run4=0
run6=0
runpkt=0
-while getopts ":46ph" opt
+mixed=0
+inline=0
+fallback=0
+legacy=0
+multi_seg=0
+cpu_crypto=0
+options=""
+while getopts ":46miflscph" opt
do
case $opt in
4)
6)
run6=1
;;
+ m)
+ mixed=1
+ ;;
+ i)
+ inline=1
+ ;;
+ f)
+ fallback=1
+ ;;
+ l)
+ legacy=1
+ options="${options} -l"
+ ;;
+ s)
+ multi_seg=1
+ options="${options} -s"
+ ;;
+ c)
+ cpu_crypto=1
+ options="${options} -c"
+ ;;
p)
runpkt=1
;;
esac
done
+shift $((OPTIND -1))
+LINUX_TEST_RUN=$*
+
# no test suite has been selected
if [[ ${run4} -eq 0 && ${run6} -eq 0 && ${runpkt} -eq 0 ]]; then
usage
exit 127
fi
+# check parameters
+if [[ ${legacy} -eq 1 ]] && [[ ${multi_seg} -eq 1 || ${fallback} -eq 1 \
+ || ${cpu_crypto} -eq 1 ]]; then
+ echo "Fallback/reassembly/cpu-crypto cannot be used with legacy mode"
+ exit 127
+fi
+
+if [[ ${cpu_crypto} -eq 1 && ${inline} -eq 1 && ${fallback} -eq 0 ]]; then
+ echo "cpu-crypto cannot be used with inline mode"
+ exit 127
+fi
+
# perform packet processing validation tests
st=0
if [ $runpkt -eq 1 ]; then
fi
fi
-# perform network tests
-if [[ ${run4} -eq 1 || ${run6} -eq 1 ]]; then
- for i in ${LINUX_TEST}; do
+desc=""
+
+# set inline/fallback tests if needed
+if [[ ${inline} -eq 1 || ${fallback} -eq 1 ]]; then
+
+ # add inline option if needed
+ if [[ ${inline} -eq 1 ]]; then
+ options="${options} -i"
+ desc="inline"
+ fi
+ # add fallback option if needed
+ if [[ ${fallback} -eq 1 ]]; then
+ options="${options} -f"
+ if [[ "${desc}" == "inline" ]]; then
+ desc="${desc} and fallback"
+ else
+ desc="fallback"
+ fi
+ fi
+
+ # select tests to run
+ if [[ -z "${LINUX_TEST_RUN}" ]]; then
+ LINUX_TEST_RUN="${LINUX_TEST_INLINE_FALLBACK}"
+ fi
+else
+ options="${options} -r"
+fi
+
+# select tests to run
+if [[ -z "${LINUX_TEST_RUN}" ]]; then
+ LINUX_TEST_RUN="${LINUX_TEST}"
+fi
+
+# perform selected tests
+if [[ ${run4} -eq 1 || ${run6} -eq 1 ]] ; then
- echo "starting test ${i}"
+ for i in ${LINUX_TEST_RUN}; do
+
+ echo "starting ${desc} test ${i}"
st4=0
+ st4m=0
if [[ ${run4} -ne 0 ]]; then
- /bin/bash ${DIR}/linux_test4.sh ${i}
+ /bin/bash ${DIR}/load_env.sh ${options} ipv4-ipv4 ${i}
st4=$?
- echo "test4 ${i} finished with status ${st4}"
+ echo "${desc} test IPv4 ${i} finished with status \
+${st4}"
+ if [[ ${mixed} -ne 0 ]] && [[ "${i}" == tun* ]]; then
+ /bin/bash ${DIR}/load_env.sh ${options} \
+ ipv4-ipv6 ${i}
+ st4m=$?
+ echo "${desc} test IPv4-IPv6 ${i} finished with\
+ status ${st4m}"
+ fi
fi
st6=0
+ st6m=0
if [[ ${run6} -ne 0 ]]; then
- /bin/bash ${DIR}/linux_test6.sh ${i}
+ /bin/bash ${DIR}/load_env.sh ${options} ipv6-ipv6 ${i}
st6=$?
- echo "test6 ${i} finished with status ${st6}"
+ echo "${desc} test IPv6 ${i} finished with status \
+${st6}"
+ if [[ ${mixed} -ne 0 ]] && [[ "${i}" == tun* ]]; then
+ /bin/bash ${DIR}/load_env.sh ${options} \
+ ipv6-ipv4 ${i}
+ st6m=$?
+ echo "${desc} test IPv6-IPv4 ${i} finished with\
+ status ${st6m}"
+ fi
fi
- let "st = st4 + st6"
+ let "st = st4 + st6 + st4m + st6m"
if [[ $st -ne 0 ]]; then
- echo "ERROR test ${i} FAILED"
+ echo "ERROR ${desc} test ${i} FAILED"
exit $st
fi
done
fi
+
+echo "All tests have ended successfully"