#include <rte_fbk_hash.h>
#include <rte_ip.h>
-#include "main.h"
-
#define RTE_LOGTYPE_IPv4_MULTICAST RTE_LOGTYPE_USER1
#define MAX_PORTS 16
/* allow max jumbo frame 9.5 KB */
#define JUMBO_FRAME_MAX_SIZE 0x2600
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-#define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */
-#define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */
-#define RX_WTHRESH 4 /**< Default values of RX write-back threshold reg. */
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-#define TX_PTHRESH 36 /**< Default values of TX prefetch threshold reg. */
-#define TX_HTHRESH 0 /**< Default values of TX host threshold reg. */
-#define TX_WTHRESH 0 /**< Default values of TX write-back threshold reg. */
-
#define MAX_PKT_BURST 32
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
},
};
-static const struct rte_eth_rxconf rx_conf = {
- .rx_thresh = {
- .pthresh = RX_PTHRESH,
- .hthresh = RX_HTHRESH,
- .wthresh = RX_WTHRESH,
- },
-};
-
-static const struct rte_eth_txconf tx_conf = {
- .tx_thresh = {
- .pthresh = TX_PTHRESH,
- .hthresh = TX_HTHRESH,
- .wthresh = TX_WTHRESH,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
-};
-
static struct rte_mempool *packet_pool, *header_pool, *clone_pool;
/* copy metadata from source packet*/
hdr->port = pkt->port;
- hdr->vlan_macip = pkt->vlan_macip;
+ hdr->vlan_tci = pkt->vlan_tci;
+ hdr->tx_offload = pkt->tx_offload;
hdr->hash = pkt->hash;
hdr->ol_flags = pkt->ol_flags;
static void
print_ethaddr(const char *name, struct ether_addr *eth_addr)
{
- printf("%s%02X:%02X:%02X:%02X:%02X:%02X", name,
- eth_addr->addr_bytes[0],
- eth_addr->addr_bytes[1],
- eth_addr->addr_bytes[2],
- eth_addr->addr_bytes[3],
- eth_addr->addr_bytes[4],
- eth_addr->addr_bytes[5]);
+ char buf[ETHER_ADDR_FMT_SIZE];
+ ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
+ printf("%s%s", name, buf);
}
static int
}
int
-MAIN(int argc, char **argv)
+main(int argc, char **argv)
{
struct lcore_queue_conf *qconf;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_txconf *txconf;
int ret;
uint16_t queueid;
unsigned lcore_id = 0, rx_lcore_id = 0;
if (clone_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init clone mbuf pool\n");
- if (rte_eal_pci_probe() < 0)
- rte_exit(EXIT_FAILURE, "Cannot probe PCI\n");
-
nb_ports = rte_eth_dev_count();
if (nb_ports == 0)
rte_exit(EXIT_FAILURE, "No physical ports!\n");
printf("rxq=%hu ", queueid);
fflush(stdout);
ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
- rte_eth_dev_socket_id(portid), &rx_conf,
+ rte_eth_dev_socket_id(portid),
+ NULL,
packet_pool);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, port=%d\n",
continue;
printf("txq=%u,%hu ", lcore_id, queueid);
fflush(stdout);
+
+ rte_eth_dev_info_get(portid, &dev_info);
+ txconf = &dev_info.default_txconf;
+ txconf->txq_flags = 0;
ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
- rte_lcore_to_socket_id(lcore_id), &tx_conf);
+ rte_lcore_to_socket_id(lcore_id), txconf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
"port=%d\n", ret, portid);