#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_launch.h>
-#include <rte_atomic.h>
#include <rte_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
/* Options for configuring ethernet port */
static struct rte_eth_conf port_conf = {
.txmode = {
- .mq_mode = ETH_MQ_TX_NONE,
+ .mq_mode = RTE_ETH_MQ_TX_NONE,
},
};
static int kni_config_network_interface(uint16_t port_id, uint8_t if_up);
static int kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[]);
-static rte_atomic32_t kni_stop = RTE_ATOMIC32_INIT(0);
-static rte_atomic32_t kni_pause = RTE_ATOMIC32_INIT(0);
+static uint32_t kni_stop;
+static uint32_t kni_pause;
/* Print out statistics on packets handled */
static void
kni_stats[i].tx_dropped);
}
printf("====== ============== ============ ============ ============ ============\n");
+
+ fflush(stdout);
}
/* Custom handling of signals to handle stats and kni processing */
return;
}
- /* When we receive a RTMIN or SIGINT signal, stop kni processing */
- if (signum == SIGRTMIN || signum == SIGINT){
- printf("\nSIGRTMIN/SIGINT received. KNI processing stopping.\n");
- rte_atomic32_inc(&kni_stop);
+ /*
+ * When we receive a RTMIN or SIGINT or SIGTERM signal,
+ * stop kni processing
+ */
+ if (signum == SIGRTMIN || signum == SIGINT || signum == SIGTERM) {
+ printf("\nSIGRTMIN/SIGINT/SIGTERM received. "
+ "KNI processing stopping.\n");
+ __atomic_fetch_add(&kni_stop, 1, __ATOMIC_RELAXED);
return;
}
}
kni_port_params_array[i]->lcore_rx,
kni_port_params_array[i]->port_id);
while (1) {
- f_stop = rte_atomic32_read(&kni_stop);
- f_pause = rte_atomic32_read(&kni_pause);
+ f_stop = __atomic_load_n(&kni_stop, __ATOMIC_RELAXED);
+ f_pause = __atomic_load_n(&kni_pause, __ATOMIC_RELAXED);
if (f_stop)
break;
if (f_pause)
kni_port_params_array[i]->lcore_tx,
kni_port_params_array[i]->port_id);
while (1) {
- f_stop = rte_atomic32_read(&kni_stop);
- f_pause = rte_atomic32_read(&kni_pause);
+ f_stop = __atomic_load_n(&kni_stop, __ATOMIC_RELAXED);
+ f_pause = __atomic_load_n(&kni_pause, __ATOMIC_RELAXED);
if (f_stop)
break;
if (f_pause)
/* Initialise device and RX/TX queues */
RTE_LOG(INFO, APP, "Initialising port %u ...\n", (unsigned)port);
fflush(stdout);
- rte_eth_dev_info_get(port, &dev_info);
- if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+
+ ret = rte_eth_dev_info_get(port, &dev_info);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error during getting device (port %u) info: %s\n",
+ port, strerror(-ret));
+
+ if (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE)
local_port_conf.txmode.offloads |=
- DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+ RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE;
ret = rte_eth_dev_configure(port, 1, 1, &local_port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Could not configure port%u (%d)\n",
rte_exit(EXIT_FAILURE, "Could not start port%u (%d)\n",
(unsigned)port, ret);
- if (promiscuous_on)
- rte_eth_promiscuous_enable(port);
+ if (promiscuous_on) {
+ ret = rte_eth_promiscuous_enable(port);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Could not enable promiscuous mode for port%u: %s\n",
+ port, rte_strerror(-ret));
+ }
}
/* Check the link status of all ports in up to 9s, and print them finally */
uint16_t portid;
uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
+ int ret;
+ char link_status_text[RTE_ETH_LINK_MAX_STR_LEN];
printf("\nChecking link status\n");
fflush(stdout);
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
- rte_eth_link_get_nowait(portid, &link);
+ ret = rte_eth_link_get_nowait(portid, &link);
+ if (ret < 0) {
+ all_ports_up = 0;
+ if (print_flag == 1)
+ printf("Port %u link get failed: %s\n",
+ portid, rte_strerror(-ret));
+ continue;
+ }
/* print link status if flag set */
if (print_flag == 1) {
- if (link.link_status)
- printf(
- "Port%d Link Up - speed %uMbps - %s\n",
- portid, link.link_speed,
- (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
- else
- printf("Port %d Link Down\n", portid);
+ rte_eth_link_to_str(link_status_text,
+ sizeof(link_status_text), &link);
+ printf("Port %d %s\n", portid,
+ link_status_text);
continue;
}
/* clear all_ports_up flag if any link down */
- if (link.link_status == ETH_LINK_DOWN) {
+ if (link.link_status == RTE_ETH_LINK_DOWN) {
all_ports_up = 0;
break;
}
static void
log_link_state(struct rte_kni *kni, int prev, struct rte_eth_link *link)
{
+ char link_status_text[RTE_ETH_LINK_MAX_STR_LEN];
if (kni == NULL || link == NULL)
return;
- if (prev == ETH_LINK_DOWN && link->link_status == ETH_LINK_UP) {
- RTE_LOG(INFO, APP, "%s NIC Link is Up %d Mbps %s %s.\n",
+ rte_eth_link_to_str(link_status_text, sizeof(link_status_text), link);
+ if (prev != link->link_status)
+ RTE_LOG(INFO, APP, "%s NIC %s",
rte_kni_get_name(kni),
- link->link_speed,
- link->link_autoneg ? "(AutoNeg)" : "(Fixed)",
- link->link_duplex ? "Full Duplex" : "Half Duplex");
- } else if (prev == ETH_LINK_UP && link->link_status == ETH_LINK_DOWN) {
- RTE_LOG(INFO, APP, "%s NIC Link is Down.\n",
- rte_kni_get_name(kni));
- }
+ link_status_text);
}
/*
struct kni_port_params **p = kni_port_params_array;
int prev;
(void) arg;
+ int ret;
while (monitor_links) {
rte_delay_ms(500);
if ((ports_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
- rte_eth_link_get_nowait(portid, &link);
+ ret = rte_eth_link_get_nowait(portid, &link);
+ if (ret < 0) {
+ RTE_LOG(ERR, APP,
+ "Get link failed (port %u): %s\n",
+ portid, rte_strerror(-ret));
+ continue;
+ }
for (i = 0; i < p[portid]->nb_kni; i++) {
prev = rte_kni_update_link(p[portid]->kni[i],
link.link_status);
return NULL;
}
-/* Callback for request of changing MTU */
static int
-kni_change_mtu(uint16_t port_id, unsigned int new_mtu)
+kni_change_mtu_(uint16_t port_id, unsigned int new_mtu)
{
int ret;
uint16_t nb_rxd = NB_RXD;
+ uint16_t nb_txd = NB_TXD;
struct rte_eth_conf conf;
struct rte_eth_dev_info dev_info;
struct rte_eth_rxconf rxq_conf;
+ struct rte_eth_txconf txq_conf;
if (!rte_eth_dev_is_valid_port(port_id)) {
RTE_LOG(ERR, APP, "Invalid port id %d\n", port_id);
RTE_LOG(INFO, APP, "Change MTU of port %d to %u\n", port_id, new_mtu);
/* Stop specific port */
- rte_eth_dev_stop(port_id);
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0) {
+ RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
+ port_id, rte_strerror(-ret));
+ return ret;
+ }
memcpy(&conf, &port_conf, sizeof(conf));
- /* Set new MTU */
- if (new_mtu > RTE_ETHER_MAX_LEN)
- conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
- else
- conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
-
- /* mtu + length of header + length of FCS = max pkt length */
- conf.rxmode.max_rx_pkt_len = new_mtu + KNI_ENET_HEADER_SIZE +
- KNI_ENET_FCS_SIZE;
+
+ conf.rxmode.mtu = new_mtu;
ret = rte_eth_dev_configure(port_id, 1, 1, &conf);
if (ret < 0) {
RTE_LOG(ERR, APP, "Fail to reconfigure port %d\n", port_id);
return ret;
}
- ret = rte_eth_dev_adjust_nb_rx_tx_desc(port_id, &nb_rxd, NULL);
+ ret = rte_eth_dev_adjust_nb_rx_tx_desc(port_id, &nb_rxd, &nb_txd);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Could not adjust number of descriptors "
"for port%u (%d)\n", (unsigned int)port_id,
ret);
- rte_eth_dev_info_get(port_id, &dev_info);
+ ret = rte_eth_dev_info_get(port_id, &dev_info);
+ if (ret != 0) {
+ RTE_LOG(ERR, APP,
+ "Error during getting device (port %u) info: %s\n",
+ port_id, strerror(-ret));
+
+ return ret;
+ }
+
rxq_conf = dev_info.default_rxconf;
rxq_conf.offloads = conf.rxmode.offloads;
ret = rte_eth_rx_queue_setup(port_id, 0, nb_rxd,
return ret;
}
+ txq_conf = dev_info.default_txconf;
+ txq_conf.offloads = conf.txmode.offloads;
+ ret = rte_eth_tx_queue_setup(port_id, 0, nb_txd,
+ rte_eth_dev_socket_id(port_id), &txq_conf);
+ if (ret < 0) {
+ RTE_LOG(ERR, APP, "Fail to setup Tx queue of port %d\n",
+ port_id);
+ return ret;
+ }
+
/* Restart specific port */
ret = rte_eth_dev_start(port_id);
if (ret < 0) {
return 0;
}
+/* Callback for request of changing MTU */
+static int
+kni_change_mtu(uint16_t port_id, unsigned int new_mtu)
+{
+ int ret;
+
+ __atomic_fetch_add(&kni_pause, 1, __ATOMIC_RELAXED);
+ ret = kni_change_mtu_(port_id, new_mtu);
+ __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);
+
+ return ret;
+}
+
/* Callback for request of configuring network interface up/down */
static int
kni_config_network_interface(uint16_t port_id, uint8_t if_up)
RTE_LOG(INFO, APP, "Configure network interface of %d %s\n",
port_id, if_up ? "up" : "down");
- rte_atomic32_inc(&kni_pause);
+ __atomic_fetch_add(&kni_pause, 1, __ATOMIC_RELAXED);
if (if_up != 0) { /* Configure network interface up */
- rte_eth_dev_stop(port_id);
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0) {
+ RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
+ port_id, rte_strerror(-ret));
+ __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);
+ return ret;
+ }
ret = rte_eth_dev_start(port_id);
- } else /* Configure network interface down */
- rte_eth_dev_stop(port_id);
+ } else { /* Configure network interface down */
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0) {
+ RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
+ port_id, rte_strerror(-ret));
+ __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);
+ return ret;
+ }
+ }
- rte_atomic32_dec(&kni_pause);
+ __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);
if (ret < 0)
RTE_LOG(ERR, APP, "Failed to start port %d\n", port_id);
struct rte_kni *kni;
struct rte_kni_conf conf;
struct kni_port_params **params = kni_port_params_array;
+ int ret;
if (port_id >= RTE_MAX_ETHPORTS || !params[port_id])
return -1;
conf.mbuf_size = MAX_PACKET_SZ;
/*
* The first KNI device associated to a port
- * is the master, for multiple kernel thread
+ * is the main, for multiple kernel thread
* environment.
*/
if (i == 0) {
struct rte_kni_ops ops;
struct rte_eth_dev_info dev_info;
- rte_eth_dev_info_get(port_id, &dev_info);
+ ret = rte_eth_dev_info_get(port_id, &dev_info);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error during getting device (port %u) info: %s\n",
+ port_id, strerror(-ret));
/* Get the interface default mac address */
- rte_eth_macaddr_get(port_id,
+ ret = rte_eth_macaddr_get(port_id,
(struct rte_ether_addr *)&conf.mac_addr);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Failed to get MAC address (port %u): %s\n",
+ port_id, rte_strerror(-ret));
rte_eth_dev_get_mtu(port_id, &conf.mtu);
+ conf.min_mtu = dev_info.min_mtu;
+ conf.max_mtu = dev_info.max_mtu;
+
memset(&ops, 0, sizeof(ops));
ops.port_id = port_id;
ops.change_mtu = kni_change_mtu;
kni_free_kni(uint16_t port_id)
{
uint8_t i;
+ int ret;
struct kni_port_params **p = kni_port_params_array;
if (port_id >= RTE_MAX_ETHPORTS || !p[port_id])
printf("Fail to release kni\n");
p[port_id]->kni[i] = NULL;
}
- rte_eth_dev_stop(port_id);
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0)
+ RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
+ port_id, rte_strerror(-ret));
+ rte_eth_dev_close(port_id);
return 0;
}
signal(SIGUSR2, signal_handler);
signal(SIGRTMIN, signal_handler);
signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
/* Initialise EAL */
ret = rte_eal_init(argc, argv);
"Could not create link status thread!\n");
/* Launch per-lcore function on every lcore */
- rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
- RTE_LCORE_FOREACH_SLAVE(i) {
+ rte_eal_mp_remote_launch(main_loop, NULL, CALL_MAIN);
+ RTE_LCORE_FOREACH_WORKER(i) {
if (rte_eal_wait_lcore(i) < 0)
return -1;
}
kni_port_params_array[i] = NULL;
}
+ /* clean up the EAL */
+ rte_eal_cleanup();
+
return 0;
}
git.droids-corp.org / dpdk.git / blobdiff