-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2012 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
#include <stdio.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
-#include <rte_memzone.h>
-#include <rte_tailq.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_launch.h>
-#include <rte_atomic.h>
#include <rte_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
-#include <rte_pci.h>
+#include <rte_bus_pci.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
-#include <rte_ring.h>
-#include <rte_log.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_string_fns.h>
/* Macros for printing using RTE_LOG */
#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1
-/* NUMA socket to allocate mbuf pool on */
-#define SOCKET 0
-
/* Max size of a single packet */
#define MAX_PACKET_SZ 2048
-/* Number of bytes needed for each mbuf */
-#define MBUF_SZ \
- (MAX_PACKET_SZ + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+/* Size of the data buffer in each mbuf */
+#define MBUF_DATA_SZ (MAX_PACKET_SZ + RTE_PKTMBUF_HEADROOM)
/* Number of mbufs in mempool that is created */
#define NB_MBUF (8192 * 16)
#define MEMPOOL_CACHE_SZ PKT_BURST_SZ
/* Number of RX ring descriptors */
-#define NB_RXD 128
+#define NB_RXD 1024
/* Number of TX ring descriptors */
-#define NB_TXD 512
+#define NB_TXD 1024
/* Total octets in ethernet header */
#define KNI_ENET_HEADER_SIZE 14
/* Total octets in the FCS */
#define KNI_ENET_FCS_SIZE 4
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-/* RX ring configuration */
-static const struct rte_eth_rxconf rx_conf = {
- .rx_thresh = {
- .pthresh = 8, /* Ring prefetch threshold */
- .hthresh = 8, /* Ring host threshold */
- .wthresh = 4, /* Ring writeback threshold */
- },
- .rx_free_thresh = 0, /* Immediately free RX descriptors */
-};
+#define KNI_US_PER_SECOND 1000000
+#define KNI_SECOND_PER_DAY 86400
+#define KNI_MAX_KTHREAD 32
/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
+ * Structure of port parameters
*/
-/* TX ring configuration */
-static const struct rte_eth_txconf tx_conf = {
- .tx_thresh = {
- .pthresh = 36, /* Ring prefetch threshold */
- .hthresh = 0, /* Ring host threshold */
- .wthresh = 0, /* Ring writeback threshold */
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
-};
+struct kni_port_params {
+ uint16_t port_id;/* Port ID */
+ unsigned lcore_rx; /* lcore ID for RX */
+ unsigned lcore_tx; /* lcore ID for TX */
+ uint32_t nb_lcore_k; /* Number of lcores for KNI multi kernel threads */
+ uint32_t nb_kni; /* Number of KNI devices to be created */
+ unsigned lcore_k[KNI_MAX_KTHREAD]; /* lcore ID list for kthreads */
+ struct rte_kni *kni[KNI_MAX_KTHREAD]; /* KNI context pointers */
+} __rte_cache_aligned;
+
+static struct kni_port_params *kni_port_params_array[RTE_MAX_ETHPORTS];
+
/* Options for configuring ethernet port */
static struct rte_eth_conf port_conf = {
- .rxmode = {
- .header_split = 0, /* Header Split disabled */
- .hw_ip_checksum = 0, /* IP checksum offload disabled */
- .hw_vlan_filter = 0, /* VLAN filtering disabled */
- .jumbo_frame = 0, /* Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /* CRC stripped by hardware */
- },
.txmode = {
- .mq_mode = ETH_DCB_NONE,
+ .mq_mode = RTE_ETH_MQ_TX_NONE,
},
};
/* Mask of enabled ports */
static uint32_t ports_mask = 0;
-
-/* Mask of cores that read from NIC and write to tap */
-static uint32_t input_cores_mask = 0;
-
-/* Mask of cores that read from tap and write to NIC */
-static uint32_t output_cores_mask = 0;
+/* Ports set in promiscuous mode off by default. */
+static int promiscuous_on = 0;
+/* Monitor link status continually. off by default. */
+static int monitor_links;
/* Structure type for recording kni interface specific stats */
struct kni_interface_stats {
uint64_t tx_dropped;
};
-/* Structure type for recording port specific information */
-struct kni_port_info_t {
- /* lcore id for ingress */
- unsigned lcore_id_ingress;
-
- /* lcore id for egress */
- unsigned lcore_id_egress;
-
- /* pointer to kni interface */
- struct rte_kni *kni;
-};
-
-/* kni port specific information array*/
-static struct kni_port_info_t kni_port_info[RTE_MAX_ETHPORTS];
-
/* kni device statistics array */
static struct kni_interface_stats kni_stats[RTE_MAX_ETHPORTS];
-/* Get the pointer to kni interface */
-static struct rte_kni * kni_lcore_to_kni(unsigned lcore_id);
+static int kni_change_mtu(uint16_t port_id, unsigned int new_mtu);
+static int kni_config_network_interface(uint16_t port_id, uint8_t if_up);
+static int kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[]);
-static int kni_change_mtu(uint8_t port_id, unsigned new_mtu);
-static int kni_config_network_interface(uint8_t port_id, uint8_t if_up);
-
-static struct rte_kni_ops kni_ops = {
- .change_mtu = kni_change_mtu,
- .config_network_if = kni_config_network_interface,
-};
+static uint32_t kni_stop;
+static uint32_t kni_pause;
/* Print out statistics on packets handled */
static void
print_stats(void)
{
- uint8_t i;
+ uint16_t i;
printf("\n**KNI example application statistics**\n"
"====== ============== ============ ============ ============ ============\n"
" Port Lcore(RX/TX) rx_packets rx_dropped tx_packets tx_dropped\n"
"------ -------------- ------------ ------------ ------------ ------------\n");
for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
- if (kni_port_info[i].kni == NULL)
+ if (!kni_port_params_array[i])
continue;
printf("%7d %10u/%2u %13"PRIu64" %13"PRIu64" %13"PRIu64" "
"%13"PRIu64"\n", i,
- kni_port_info[i].lcore_id_ingress,
- kni_port_info[i].lcore_id_egress,
+ kni_port_params_array[i]->lcore_rx,
+ kni_port_params_array[i]->lcore_tx,
kni_stats[i].rx_packets,
kni_stats[i].rx_dropped,
kni_stats[i].tx_packets,
kni_stats[i].tx_dropped);
}
printf("====== ============== ============ ============ ============ ============\n");
+
+ fflush(stdout);
}
-/* Custom handling of signals to handle stats */
+/* Custom handling of signals to handle stats and kni processing */
static void
signal_handler(int signum)
{
/* When we receive a USR2 signal, reset stats */
if (signum == SIGUSR2) {
memset(&kni_stats, 0, sizeof(kni_stats));
- printf("\n**Statistics have been reset**\n");
+ printf("\n** Statistics have been reset **\n");
return;
}
+
+ /*
+ * When we receive a RTMIN or SIGINT or SIGTERM signal,
+ * stop kni processing
+ */
+ if (signum == SIGRTMIN || signum == SIGINT || signum == SIGTERM) {
+ printf("\nSIGRTMIN/SIGINT/SIGTERM received. "
+ "KNI processing stopping.\n");
+ __atomic_fetch_add(&kni_stop, 1, __ATOMIC_RELAXED);
+ return;
+ }
}
static void
* Interface to burst rx and enqueue mbufs into rx_q
*/
static void
-kni_ingress(struct rte_kni *kni)
+kni_ingress(struct kni_port_params *p)
{
- uint8_t port_id = rte_kni_get_port_id(kni);
+ uint8_t i;
+ uint16_t port_id;
unsigned nb_rx, num;
+ uint32_t nb_kni;
struct rte_mbuf *pkts_burst[PKT_BURST_SZ];
- if (kni == NULL || port_id >= RTE_MAX_ETHPORTS)
+ if (p == NULL)
return;
- /* Burst rx from eth */
- nb_rx = rte_eth_rx_burst(port_id, 0, pkts_burst, PKT_BURST_SZ);
- if (nb_rx > PKT_BURST_SZ) {
- RTE_LOG(ERR, APP, "Error receiving from eth\n");
- return;
- }
-
- /* Burst tx to kni */
- num = rte_kni_tx_burst(kni, pkts_burst, nb_rx);
- kni_stats[port_id].rx_packets += num;
-
- if (unlikely(num < nb_rx)) {
- /* Free mbufs not tx to kni interface */
- kni_burst_free_mbufs(&pkts_burst[num], nb_rx - num);
- kni_stats[port_id].rx_dropped += nb_rx - num;
+ nb_kni = p->nb_kni;
+ port_id = p->port_id;
+ for (i = 0; i < nb_kni; i++) {
+ /* Burst rx from eth */
+ nb_rx = rte_eth_rx_burst(port_id, 0, pkts_burst, PKT_BURST_SZ);
+ if (unlikely(nb_rx > PKT_BURST_SZ)) {
+ RTE_LOG(ERR, APP, "Error receiving from eth\n");
+ return;
+ }
+ /* Burst tx to kni */
+ num = rte_kni_tx_burst(p->kni[i], pkts_burst, nb_rx);
+ if (num)
+ kni_stats[port_id].rx_packets += num;
+
+ rte_kni_handle_request(p->kni[i]);
+ if (unlikely(num < nb_rx)) {
+ /* Free mbufs not tx to kni interface */
+ kni_burst_free_mbufs(&pkts_burst[num], nb_rx - num);
+ kni_stats[port_id].rx_dropped += nb_rx - num;
+ }
}
}
* Interface to dequeue mbufs from tx_q and burst tx
*/
static void
-kni_egress(struct rte_kni *kni)
+kni_egress(struct kni_port_params *p)
{
- uint8_t port_id = rte_kni_get_port_id(kni);;
+ uint8_t i;
+ uint16_t port_id;
unsigned nb_tx, num;
+ uint32_t nb_kni;
struct rte_mbuf *pkts_burst[PKT_BURST_SZ];
- if (kni == NULL || port_id >= RTE_MAX_ETHPORTS)
+ if (p == NULL)
return;
- /* Burst rx from kni */
- num = rte_kni_rx_burst(kni, pkts_burst, PKT_BURST_SZ);
- if (num > PKT_BURST_SZ) {
- RTE_LOG(ERR, APP, "Error receiving from KNI\n");
- return;
- }
-
- /* Burst tx to eth */
- nb_tx = rte_eth_tx_burst(port_id, 0, pkts_burst, (uint16_t)num);
- kni_stats[port_id].tx_packets += nb_tx;
-
- if (unlikely(nb_tx < num)) {
- /* Free mbufs not tx to NIC */
- kni_burst_free_mbufs(&pkts_burst[nb_tx], num - nb_tx);
- kni_stats[port_id].tx_dropped += num - nb_tx;
+ nb_kni = p->nb_kni;
+ port_id = p->port_id;
+ for (i = 0; i < nb_kni; i++) {
+ /* Burst rx from kni */
+ num = rte_kni_rx_burst(p->kni[i], pkts_burst, PKT_BURST_SZ);
+ if (unlikely(num > PKT_BURST_SZ)) {
+ RTE_LOG(ERR, APP, "Error receiving from KNI\n");
+ return;
+ }
+ /* Burst tx to eth */
+ nb_tx = rte_eth_tx_burst(port_id, 0, pkts_burst, (uint16_t)num);
+ if (nb_tx)
+ kni_stats[port_id].tx_packets += nb_tx;
+ if (unlikely(nb_tx < num)) {
+ /* Free mbufs not tx to NIC */
+ kni_burst_free_mbufs(&pkts_burst[nb_tx], num - nb_tx);
+ kni_stats[port_id].tx_dropped += num - nb_tx;
+ }
}
}
-/* Main processing loop */
-static __attribute__((noreturn)) int
+static int
main_loop(__rte_unused void *arg)
{
- uint8_t pid;
+ uint16_t i;
+ int32_t f_stop;
+ int32_t f_pause;
const unsigned lcore_id = rte_lcore_id();
- struct rte_kni *kni = kni_lcore_to_kni(lcore_id);
+ enum lcore_rxtx {
+ LCORE_NONE,
+ LCORE_RX,
+ LCORE_TX,
+ LCORE_MAX
+ };
+ enum lcore_rxtx flag = LCORE_NONE;
+
+ RTE_ETH_FOREACH_DEV(i) {
+ if (!kni_port_params_array[i])
+ continue;
+ if (kni_port_params_array[i]->lcore_rx == (uint8_t)lcore_id) {
+ flag = LCORE_RX;
+ break;
+ } else if (kni_port_params_array[i]->lcore_tx ==
+ (uint8_t)lcore_id) {
+ flag = LCORE_TX;
+ break;
+ }
+ }
- if (kni == NULL) {
+ if (flag == LCORE_RX) {
+ RTE_LOG(INFO, APP, "Lcore %u is reading from port %d\n",
+ kni_port_params_array[i]->lcore_rx,
+ kni_port_params_array[i]->port_id);
+ while (1) {
+ f_stop = __atomic_load_n(&kni_stop, __ATOMIC_RELAXED);
+ f_pause = __atomic_load_n(&kni_pause, __ATOMIC_RELAXED);
+ if (f_stop)
+ break;
+ if (f_pause)
+ continue;
+ kni_ingress(kni_port_params_array[i]);
+ }
+ } else if (flag == LCORE_TX) {
+ RTE_LOG(INFO, APP, "Lcore %u is writing to port %d\n",
+ kni_port_params_array[i]->lcore_tx,
+ kni_port_params_array[i]->port_id);
+ while (1) {
+ f_stop = __atomic_load_n(&kni_stop, __ATOMIC_RELAXED);
+ f_pause = __atomic_load_n(&kni_pause, __ATOMIC_RELAXED);
+ if (f_stop)
+ break;
+ if (f_pause)
+ continue;
+ kni_egress(kni_port_params_array[i]);
+ }
+ } else
RTE_LOG(INFO, APP, "Lcore %u has nothing to do\n", lcore_id);
- for (;;)
- ; /* loop doing nothing */
- } else {
- pid = rte_kni_get_port_id(kni);
- if (pid >= RTE_MAX_ETHPORTS)
- rte_exit(EXIT_FAILURE, "Failure: port id >= %d\n",
- RTE_MAX_ETHPORTS);
-
- if (kni_port_info[pid].lcore_id_ingress == lcore_id) {
- /* Running on lcores for input packets */
- RTE_LOG(INFO, APP, "Lcore %u is reading from "
- "port %d\n", lcore_id, pid);
- fflush(stdout);
- /* rx loop */
- while (1)
- kni_ingress(kni);
- } else if (kni_port_info[pid].lcore_id_egress == lcore_id) {
- /* Running on lcores for output packets */
- RTE_LOG(INFO, APP, "Lcore %u is writing to port %d\n",
- lcore_id, pid);
- fflush(stdout);
-
- /* tx loop */
- while (1)
- kni_egress(kni);
- } else {
- RTE_LOG(INFO, APP, "Lcore %u has nothing to do\n",
- lcore_id);
- for (;;)
- ; /* loop doing nothing */
- }
- }
+ return 0;
}
/* Display usage instructions */
static void
print_usage(const char *prgname)
{
- RTE_LOG(INFO, APP, "\nUsage: %s [EAL options] -- -p PORTMASK "
- "-i IN_CORES -o OUT_CORES\n"
- " -p PORTMASK: hex bitmask of ports to use\n"
- " -i IN_CORES: hex bitmask of cores which read "
- "from NIC\n"
- " -o OUT_CORES: hex bitmask of cores which write to NIC\n",
+ RTE_LOG(INFO, APP, "\nUsage: %s [EAL options] -- -p PORTMASK -P -m "
+ "[--config (port,lcore_rx,lcore_tx,lcore_kthread...)"
+ "[,(port,lcore_rx,lcore_tx,lcore_kthread...)]]\n"
+ " -p PORTMASK: hex bitmask of ports to use\n"
+ " -P : enable promiscuous mode\n"
+ " -m : enable monitoring of port carrier state\n"
+ " --config (port,lcore_rx,lcore_tx,lcore_kthread...): "
+ "port and lcore configurations\n",
prgname);
}
return (uint32_t)num;
}
-static int
-kni_setup_port_affinities(uint8_t nb_port)
+static void
+print_config(void)
{
- unsigned i;
- uint32_t in_lcore, out_lcore;
- uint8_t rx_port = 0, tx_port = 0;
- uint8_t pid;
-
- if (nb_port > RTE_MAX_ETHPORTS) {
- RTE_LOG(ERR, APP, "The number of ports exceeds the maximum "
- "number of 0x%x\n", RTE_MAX_ETHPORTS);
- return -1;
- }
+ uint32_t i, j;
+ struct kni_port_params **p = kni_port_params_array;
- RTE_LCORE_FOREACH(i) {
- in_lcore = input_cores_mask & (1 << i);
- out_lcore = output_cores_mask & (1 << i);
-
- /* Check if it is in input lcore or output lcore mask */
- if (in_lcore == 0 && out_lcore == 0)
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
+ if (!p[i])
continue;
+ RTE_LOG(DEBUG, APP, "Port ID: %d\n", p[i]->port_id);
+ RTE_LOG(DEBUG, APP, "Rx lcore ID: %u, Tx lcore ID: %u\n",
+ p[i]->lcore_rx, p[i]->lcore_tx);
+ for (j = 0; j < p[i]->nb_lcore_k; j++)
+ RTE_LOG(DEBUG, APP, "Kernel thread lcore ID: %u\n",
+ p[i]->lcore_k[j]);
+ }
+}
- /* Check if it is in both input lcore and output lcore mask */
- if (in_lcore != 0 && out_lcore != 0) {
- RTE_LOG(ERR, APP, "Lcore 0x%x can not be used in both "
- "input lcore and output lcore mask\n", i);
- return -1;
+static int
+parse_config(const char *arg)
+{
+ const char *p, *p0 = arg;
+ char s[256], *end;
+ unsigned size;
+ enum fieldnames {
+ FLD_PORT = 0,
+ FLD_LCORE_RX,
+ FLD_LCORE_TX,
+ _NUM_FLD = KNI_MAX_KTHREAD + 3,
+ };
+ int i, j, nb_token;
+ char *str_fld[_NUM_FLD];
+ unsigned long int_fld[_NUM_FLD];
+ uint16_t port_id, nb_kni_port_params = 0;
+
+ memset(&kni_port_params_array, 0, sizeof(kni_port_params_array));
+ while (((p = strchr(p0, '(')) != NULL) &&
+ nb_kni_port_params < RTE_MAX_ETHPORTS) {
+ p++;
+ if ((p0 = strchr(p, ')')) == NULL)
+ goto fail;
+ size = p0 - p;
+ if (size >= sizeof(s)) {
+ printf("Invalid config parameters\n");
+ goto fail;
}
-
- /* Check if the lcore is enabled or not */
- if (rte_lcore_is_enabled(i) == 0) {
- RTE_LOG(ERR, APP, "Lcore 0x%x is not enabled\n", i);
- return -1;
+ snprintf(s, sizeof(s), "%.*s", size, p);
+ nb_token = rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',');
+ if (nb_token <= FLD_LCORE_TX) {
+ printf("Invalid config parameters\n");
+ goto fail;
}
-
- if (in_lcore != 0) {
- /* It is be for packet receiving */
- while ((rx_port < nb_port) &&
- ((ports_mask & (1 << rx_port)) == 0))
- rx_port++;
-
- if (rx_port >= nb_port) {
- RTE_LOG(ERR, APP, "There is no enough ports "
- "for ingress lcores\n");
- return -1;
+ for (i = 0; i < nb_token; i++) {
+ errno = 0;
+ int_fld[i] = strtoul(str_fld[i], &end, 0);
+ if (errno != 0 || end == str_fld[i]) {
+ printf("Invalid config parameters\n");
+ goto fail;
}
- kni_port_info[rx_port].lcore_id_ingress = i;
- rx_port++;
- } else {
- /* It is for packet transmitting */
- while ((tx_port < nb_port) &&
- ((ports_mask & (1 << tx_port)) == 0))
- tx_port++;
-
- if (tx_port >= nb_port) {
- RTE_LOG(ERR, APP, "There is no enough ports "
- "for engree lcores\n");
- return -1;
- }
- kni_port_info[tx_port].lcore_id_egress = i;
- tx_port++;
}
- }
- /* Display all the port/lcore affinity */
- for (pid = 0; pid < nb_port; pid++) {
- RTE_LOG(INFO, APP, "Port%d, ingress lcore id: %u, "
- "egress lcore id: %u\n", pid,
- kni_port_info[pid].lcore_id_ingress,
- kni_port_info[pid].lcore_id_egress);
+ i = 0;
+ port_id = int_fld[i++];
+ if (port_id >= RTE_MAX_ETHPORTS) {
+ printf("Port ID %d could not exceed the maximum %d\n",
+ port_id, RTE_MAX_ETHPORTS);
+ goto fail;
+ }
+ if (kni_port_params_array[port_id]) {
+ printf("Port %d has been configured\n", port_id);
+ goto fail;
+ }
+ kni_port_params_array[port_id] =
+ rte_zmalloc("KNI_port_params",
+ sizeof(struct kni_port_params), RTE_CACHE_LINE_SIZE);
+ kni_port_params_array[port_id]->port_id = port_id;
+ kni_port_params_array[port_id]->lcore_rx =
+ (uint8_t)int_fld[i++];
+ kni_port_params_array[port_id]->lcore_tx =
+ (uint8_t)int_fld[i++];
+ if (kni_port_params_array[port_id]->lcore_rx >= RTE_MAX_LCORE ||
+ kni_port_params_array[port_id]->lcore_tx >= RTE_MAX_LCORE) {
+ printf("lcore_rx %u or lcore_tx %u ID could not "
+ "exceed the maximum %u\n",
+ kni_port_params_array[port_id]->lcore_rx,
+ kni_port_params_array[port_id]->lcore_tx,
+ (unsigned)RTE_MAX_LCORE);
+ goto fail;
+ }
+ for (j = 0; i < nb_token && j < KNI_MAX_KTHREAD; i++, j++)
+ kni_port_params_array[port_id]->lcore_k[j] =
+ (uint8_t)int_fld[i];
+ kni_port_params_array[port_id]->nb_lcore_k = j;
}
+ print_config();
return 0;
+
+fail:
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
+ if (kni_port_params_array[i]) {
+ rte_free(kni_port_params_array[i]);
+ kni_port_params_array[i] = NULL;
+ }
+ }
+
+ return -1;
}
-static struct rte_kni *
-kni_lcore_to_kni(unsigned lcore_id)
+static int
+validate_parameters(uint32_t portmask)
{
- uint8_t pid;
- struct kni_port_info_t *p = kni_port_info;
+ uint32_t i;
- for (pid = 0; pid < RTE_MAX_ETHPORTS; pid++) {
- if (p[pid].kni != NULL && (p[pid].lcore_id_ingress == lcore_id
- || p[pid].lcore_id_egress == lcore_id))
- return p[pid].kni;
+ if (!portmask) {
+ printf("No port configured in port mask\n");
+ return -1;
}
- return NULL;
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
+ if (((portmask & (1 << i)) && !kni_port_params_array[i]) ||
+ (!(portmask & (1 << i)) && kni_port_params_array[i]))
+ rte_exit(EXIT_FAILURE, "portmask is not consistent "
+ "to port ids specified in --config\n");
+
+ if (kni_port_params_array[i] && !rte_lcore_is_enabled(\
+ (unsigned)(kni_port_params_array[i]->lcore_rx)))
+ rte_exit(EXIT_FAILURE, "lcore id %u for "
+ "port %d receiving not enabled\n",
+ kni_port_params_array[i]->lcore_rx,
+ kni_port_params_array[i]->port_id);
+
+ if (kni_port_params_array[i] && !rte_lcore_is_enabled(\
+ (unsigned)(kni_port_params_array[i]->lcore_tx)))
+ rte_exit(EXIT_FAILURE, "lcore id %u for "
+ "port %d transmitting not enabled\n",
+ kni_port_params_array[i]->lcore_tx,
+ kni_port_params_array[i]->port_id);
+
+ }
+
+ return 0;
}
+#define CMDLINE_OPT_CONFIG "config"
+
/* Parse the arguments given in the command line of the application */
-static void
+static int
parse_args(int argc, char **argv)
{
- int opt;
+ int opt, longindex, ret = 0;
const char *prgname = argv[0];
+ static struct option longopts[] = {
+ {CMDLINE_OPT_CONFIG, required_argument, NULL, 0},
+ {NULL, 0, NULL, 0}
+ };
/* Disable printing messages within getopt() */
opterr = 0;
/* Parse command line */
- while ((opt = getopt(argc, argv, "i:o:p:")) != EOF) {
+ while ((opt = getopt_long(argc, argv, "p:Pm", longopts,
+ &longindex)) != EOF) {
switch (opt) {
- case 'i':
- input_cores_mask = parse_unsigned(optarg);
- break;
- case 'o':
- output_cores_mask = parse_unsigned(optarg);
- break;
case 'p':
ports_mask = parse_unsigned(optarg);
break;
+ case 'P':
+ promiscuous_on = 1;
+ break;
+ case 'm':
+ monitor_links = 1;
+ break;
+ case 0:
+ if (!strncmp(longopts[longindex].name,
+ CMDLINE_OPT_CONFIG,
+ sizeof(CMDLINE_OPT_CONFIG))) {
+ ret = parse_config(optarg);
+ if (ret) {
+ printf("Invalid config\n");
+ print_usage(prgname);
+ return -1;
+ }
+ }
+ break;
default:
print_usage(prgname);
- rte_exit(EXIT_FAILURE, "Invalid option specified");
+ rte_exit(EXIT_FAILURE, "Invalid option specified\n");
}
}
/* Check that options were parsed ok */
- if (input_cores_mask == 0) {
+ if (validate_parameters(ports_mask) < 0) {
print_usage(prgname);
- rte_exit(EXIT_FAILURE, "IN_CORES not specified correctly");
+ rte_exit(EXIT_FAILURE, "Invalid parameters\n");
}
- if (output_cores_mask == 0) {
- print_usage(prgname);
- rte_exit(EXIT_FAILURE, "OUT_CORES not specified correctly");
- }
- if (ports_mask == 0) {
- print_usage(prgname);
- rte_exit(EXIT_FAILURE, "PORTMASK not specified correctly");
+
+ return ret;
+}
+
+/* Initialize KNI subsystem */
+static void
+init_kni(void)
+{
+ unsigned int num_of_kni_ports = 0, i;
+ struct kni_port_params **params = kni_port_params_array;
+
+ /* Calculate the maximum number of KNI interfaces that will be used */
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
+ if (kni_port_params_array[i]) {
+ num_of_kni_ports += (params[i]->nb_lcore_k ?
+ params[i]->nb_lcore_k : 1);
+ }
}
+
+ /* Invoke rte KNI init to preallocate the ports */
+ rte_kni_init(num_of_kni_ports);
}
/* Initialise a single port on an Ethernet device */
static void
-init_port(uint8_t port)
+init_port(uint16_t port)
{
int ret;
+ uint16_t nb_rxd = NB_RXD;
+ uint16_t nb_txd = NB_TXD;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_rxconf rxq_conf;
+ struct rte_eth_txconf txq_conf;
+ struct rte_eth_conf local_port_conf = port_conf;
/* Initialise device and RX/TX queues */
RTE_LOG(INFO, APP, "Initialising port %u ...\n", (unsigned)port);
fflush(stdout);
- ret = rte_eth_dev_configure(port, 1, 1, &port_conf);
+
+ ret = rte_eth_dev_info_get(port, &dev_info);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error during getting device (port %u) info: %s\n",
+ port, strerror(-ret));
+
+ if (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE)
+ local_port_conf.txmode.offloads |=
+ RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE;
+ ret = rte_eth_dev_configure(port, 1, 1, &local_port_conf);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "Could not configure port%u (%d)",
+ rte_exit(EXIT_FAILURE, "Could not configure port%u (%d)\n",
(unsigned)port, ret);
- ret = rte_eth_rx_queue_setup(port, 0, NB_RXD, SOCKET, &rx_conf,
- pktmbuf_pool);
+ ret = rte_eth_dev_adjust_nb_rx_tx_desc(port, &nb_rxd, &nb_txd);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Could not adjust number of descriptors "
+ "for port%u (%d)\n", (unsigned)port, ret);
+
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = local_port_conf.rxmode.offloads;
+ ret = rte_eth_rx_queue_setup(port, 0, nb_rxd,
+ rte_eth_dev_socket_id(port), &rxq_conf, pktmbuf_pool);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Could not setup up RX queue for "
- "port%u (%d)", (unsigned)port, ret);
+ "port%u (%d)\n", (unsigned)port, ret);
- ret = rte_eth_tx_queue_setup(port, 0, NB_TXD, SOCKET, &tx_conf);
+ txq_conf = dev_info.default_txconf;
+ txq_conf.offloads = local_port_conf.txmode.offloads;
+ ret = rte_eth_tx_queue_setup(port, 0, nb_txd,
+ rte_eth_dev_socket_id(port), &txq_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Could not setup up TX queue for "
- "port%u (%d)", (unsigned)port, ret);
+ "port%u (%d)\n", (unsigned)port, ret);
ret = rte_eth_dev_start(port);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "Could not start port%u (%d)",
+ rte_exit(EXIT_FAILURE, "Could not start port%u (%d)\n",
(unsigned)port, ret);
- rte_eth_promiscuous_enable(port);
+ if (promiscuous_on) {
+ ret = rte_eth_promiscuous_enable(port);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Could not enable promiscuous mode for port%u: %s\n",
+ port, rte_strerror(-ret));
+ }
}
/* Check the link status of all ports in up to 9s, and print them finally */
static void
-check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
- uint8_t portid, count, all_ports_up, print_flag = 0;
+ uint16_t portid;
+ uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
+ int ret;
+ char link_status_text[RTE_ETH_LINK_MAX_STR_LEN];
- printf("\nChecking link status");
+ printf("\nChecking link status\n");
fflush(stdout);
for (count = 0; count <= MAX_CHECK_TIME; count++) {
all_ports_up = 1;
- for (portid = 0; portid < port_num; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
- rte_eth_link_get_nowait(portid, &link);
+ ret = rte_eth_link_get_nowait(portid, &link);
+ if (ret < 0) {
+ all_ports_up = 0;
+ if (print_flag == 1)
+ printf("Port %u link get failed: %s\n",
+ portid, rte_strerror(-ret));
+ continue;
+ }
/* print link status if flag set */
if (print_flag == 1) {
- if (link.link_status)
- printf("Port %d Link Up - speed %u "
- "Mbps - %s\n", (uint8_t)portid,
- (unsigned)link.link_speed,
- (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
- else
- printf("Port %d Link Down\n",
- (uint8_t)portid);
+ rte_eth_link_to_str(link_status_text,
+ sizeof(link_status_text), &link);
+ printf("Port %d %s\n", portid,
+ link_status_text);
continue;
}
/* clear all_ports_up flag if any link down */
- if (link.link_status == 0) {
+ if (link.link_status == RTE_ETH_LINK_DOWN) {
all_ports_up = 0;
break;
}
}
}
-/* Callback for request of changing MTU */
+static void
+log_link_state(struct rte_kni *kni, int prev, struct rte_eth_link *link)
+{
+ char link_status_text[RTE_ETH_LINK_MAX_STR_LEN];
+ if (kni == NULL || link == NULL)
+ return;
+
+ rte_eth_link_to_str(link_status_text, sizeof(link_status_text), link);
+ if (prev != link->link_status)
+ RTE_LOG(INFO, APP, "%s NIC %s\n",
+ rte_kni_get_name(kni),
+ link_status_text);
+}
+
+/*
+ * Monitor the link status of all ports and update the
+ * corresponding KNI interface(s)
+ */
+static void *
+monitor_all_ports_link_status(void *arg)
+{
+ uint16_t portid;
+ struct rte_eth_link link;
+ unsigned int i;
+ struct kni_port_params **p = kni_port_params_array;
+ int prev;
+ (void) arg;
+ int ret;
+
+ while (monitor_links) {
+ rte_delay_ms(500);
+ RTE_ETH_FOREACH_DEV(portid) {
+ if ((ports_mask & (1 << portid)) == 0)
+ continue;
+ memset(&link, 0, sizeof(link));
+ ret = rte_eth_link_get_nowait(portid, &link);
+ if (ret < 0) {
+ RTE_LOG(ERR, APP,
+ "Get link failed (port %u): %s\n",
+ portid, rte_strerror(-ret));
+ continue;
+ }
+ for (i = 0; i < p[portid]->nb_kni; i++) {
+ prev = rte_kni_update_link(p[portid]->kni[i],
+ link.link_status);
+ log_link_state(p[portid]->kni[i], prev, &link);
+ }
+ }
+ }
+ return NULL;
+}
+
static int
-kni_change_mtu(uint8_t port_id, unsigned new_mtu)
+kni_change_mtu_(uint16_t port_id, unsigned int new_mtu)
{
int ret;
+ uint16_t nb_rxd = NB_RXD;
+ uint16_t nb_txd = NB_TXD;
struct rte_eth_conf conf;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_rxconf rxq_conf;
+ struct rte_eth_txconf txq_conf;
- if (port_id >= rte_eth_dev_count()) {
+ if (!rte_eth_dev_is_valid_port(port_id)) {
RTE_LOG(ERR, APP, "Invalid port id %d\n", port_id);
return -EINVAL;
}
RTE_LOG(INFO, APP, "Change MTU of port %d to %u\n", port_id, new_mtu);
/* Stop specific port */
- rte_eth_dev_stop(port_id);
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0) {
+ RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
+ port_id, rte_strerror(-ret));
+ return ret;
+ }
memcpy(&conf, &port_conf, sizeof(conf));
- /* Set new MTU */
- if (new_mtu > ETHER_MAX_LEN)
- conf.rxmode.jumbo_frame = 1;
- else
- conf.rxmode.jumbo_frame = 0;
-
- /* mtu + length of header + length of FCS = max pkt length */
- conf.rxmode.max_rx_pkt_len = new_mtu + KNI_ENET_HEADER_SIZE +
- KNI_ENET_FCS_SIZE;
+
+ conf.rxmode.mtu = new_mtu;
ret = rte_eth_dev_configure(port_id, 1, 1, &conf);
if (ret < 0) {
RTE_LOG(ERR, APP, "Fail to reconfigure port %d\n", port_id);
return ret;
}
+ ret = rte_eth_dev_adjust_nb_rx_tx_desc(port_id, &nb_rxd, &nb_txd);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Could not adjust number of descriptors "
+ "for port%u (%d)\n", (unsigned int)port_id,
+ ret);
+
+ ret = rte_eth_dev_info_get(port_id, &dev_info);
+ if (ret != 0) {
+ RTE_LOG(ERR, APP,
+ "Error during getting device (port %u) info: %s\n",
+ port_id, strerror(-ret));
+
+ return ret;
+ }
+
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = conf.rxmode.offloads;
+ ret = rte_eth_rx_queue_setup(port_id, 0, nb_rxd,
+ rte_eth_dev_socket_id(port_id), &rxq_conf, pktmbuf_pool);
+ if (ret < 0) {
+ RTE_LOG(ERR, APP, "Fail to setup Rx queue of port %d\n",
+ port_id);
+ return ret;
+ }
+
+ txq_conf = dev_info.default_txconf;
+ txq_conf.offloads = conf.txmode.offloads;
+ ret = rte_eth_tx_queue_setup(port_id, 0, nb_txd,
+ rte_eth_dev_socket_id(port_id), &txq_conf);
+ if (ret < 0) {
+ RTE_LOG(ERR, APP, "Fail to setup Tx queue of port %d\n",
+ port_id);
+ return ret;
+ }
+
/* Restart specific port */
ret = rte_eth_dev_start(port_id);
if (ret < 0) {
return 0;
}
+/* Callback for request of changing MTU */
+static int
+kni_change_mtu(uint16_t port_id, unsigned int new_mtu)
+{
+ int ret;
+
+ __atomic_fetch_add(&kni_pause, 1, __ATOMIC_RELAXED);
+ ret = kni_change_mtu_(port_id, new_mtu);
+ __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);
+
+ return ret;
+}
+
/* Callback for request of configuring network interface up/down */
static int
-kni_config_network_interface(uint8_t port_id, uint8_t if_up)
+kni_config_network_interface(uint16_t port_id, uint8_t if_up)
{
int ret = 0;
- if (port_id >= rte_eth_dev_count() || port_id >= RTE_MAX_ETHPORTS) {
+ if (!rte_eth_dev_is_valid_port(port_id)) {
RTE_LOG(ERR, APP, "Invalid port id %d\n", port_id);
return -EINVAL;
}
RTE_LOG(INFO, APP, "Configure network interface of %d %s\n",
port_id, if_up ? "up" : "down");
+ __atomic_fetch_add(&kni_pause, 1, __ATOMIC_RELAXED);
+
if (if_up != 0) { /* Configure network interface up */
- rte_eth_dev_stop(port_id);
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0) {
+ RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
+ port_id, rte_strerror(-ret));
+ __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);
+ return ret;
+ }
ret = rte_eth_dev_start(port_id);
- } else /* Configure network interface down */
- rte_eth_dev_stop(port_id);
+ } else { /* Configure network interface down */
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0) {
+ RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
+ port_id, rte_strerror(-ret));
+ __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);
+ return ret;
+ }
+ }
+
+ __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);
if (ret < 0)
RTE_LOG(ERR, APP, "Failed to start port %d\n", port_id);
return ret;
}
+static void
+print_ethaddr(const char *name, struct rte_ether_addr *mac_addr)
+{
+ char buf[RTE_ETHER_ADDR_FMT_SIZE];
+ rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, mac_addr);
+ RTE_LOG(INFO, APP, "\t%s%s\n", name, buf);
+}
+
+/* Callback for request of configuring mac address */
+static int
+kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[])
+{
+ int ret = 0;
+
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ RTE_LOG(ERR, APP, "Invalid port id %d\n", port_id);
+ return -EINVAL;
+ }
+
+ RTE_LOG(INFO, APP, "Configure mac address of %d\n", port_id);
+ print_ethaddr("Address:", (struct rte_ether_addr *)mac_addr);
+
+ ret = rte_eth_dev_default_mac_addr_set(port_id,
+ (struct rte_ether_addr *)mac_addr);
+ if (ret < 0)
+ RTE_LOG(ERR, APP, "Failed to config mac_addr for port %d\n",
+ port_id);
+
+ return ret;
+}
+
+static int
+kni_alloc(uint16_t port_id)
+{
+ uint8_t i;
+ struct rte_kni *kni;
+ struct rte_kni_conf conf;
+ struct kni_port_params **params = kni_port_params_array;
+ int ret;
+
+ if (port_id >= RTE_MAX_ETHPORTS || !params[port_id])
+ return -1;
+
+ params[port_id]->nb_kni = params[port_id]->nb_lcore_k ?
+ params[port_id]->nb_lcore_k : 1;
+
+ for (i = 0; i < params[port_id]->nb_kni; i++) {
+ /* Clear conf at first */
+ memset(&conf, 0, sizeof(conf));
+ if (params[port_id]->nb_lcore_k) {
+ snprintf(conf.name, RTE_KNI_NAMESIZE,
+ "vEth%u_%u", port_id, i);
+ conf.core_id = params[port_id]->lcore_k[i];
+ conf.force_bind = 1;
+ } else
+ snprintf(conf.name, RTE_KNI_NAMESIZE,
+ "vEth%u", port_id);
+ conf.group_id = port_id;
+ conf.mbuf_size = MAX_PACKET_SZ;
+ /*
+ * The first KNI device associated to a port
+ * is the main, for multiple kernel thread
+ * environment.
+ */
+ if (i == 0) {
+ struct rte_kni_ops ops;
+ struct rte_eth_dev_info dev_info;
+
+ ret = rte_eth_dev_info_get(port_id, &dev_info);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error during getting device (port %u) info: %s\n",
+ port_id, strerror(-ret));
+
+ /* Get the interface default mac address */
+ ret = rte_eth_macaddr_get(port_id,
+ (struct rte_ether_addr *)&conf.mac_addr);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Failed to get MAC address (port %u): %s\n",
+ port_id, rte_strerror(-ret));
+
+ rte_eth_dev_get_mtu(port_id, &conf.mtu);
+
+ conf.min_mtu = dev_info.min_mtu;
+ conf.max_mtu = dev_info.max_mtu;
+
+ memset(&ops, 0, sizeof(ops));
+ ops.port_id = port_id;
+ ops.change_mtu = kni_change_mtu;
+ ops.config_network_if = kni_config_network_interface;
+ ops.config_mac_address = kni_config_mac_address;
+
+ kni = rte_kni_alloc(pktmbuf_pool, &conf, &ops);
+ } else
+ kni = rte_kni_alloc(pktmbuf_pool, &conf, NULL);
+
+ if (!kni)
+ rte_exit(EXIT_FAILURE, "Fail to create kni for "
+ "port: %d\n", port_id);
+ params[port_id]->kni[i] = kni;
+ }
+
+ return 0;
+}
+
+static int
+kni_free_kni(uint16_t port_id)
+{
+ uint8_t i;
+ int ret;
+ struct kni_port_params **p = kni_port_params_array;
+
+ if (port_id >= RTE_MAX_ETHPORTS || !p[port_id])
+ return -1;
+
+ for (i = 0; i < p[port_id]->nb_kni; i++) {
+ if (rte_kni_release(p[port_id]->kni[i]))
+ printf("Fail to release kni\n");
+ p[port_id]->kni[i] = NULL;
+ }
+ ret = rte_eth_dev_stop(port_id);
+ if (ret != 0)
+ RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
+ port_id, rte_strerror(-ret));
+ rte_eth_dev_close(port_id);
+
+ return 0;
+}
+
/* Initialise ports/queues etc. and start main loop on each core */
int
main(int argc, char** argv)
{
int ret;
- unsigned i, cfg_ports = 0;
- uint8_t nb_sys_ports, port;
+ uint16_t nb_sys_ports, port;
+ unsigned i;
+ void *retval;
+ pthread_t kni_link_tid;
+ int pid;
- /* Associate signal_hanlder function with USR signals */
+ /* Associate signal_handler function with USR signals */
signal(SIGUSR1, signal_handler);
signal(SIGUSR2, signal_handler);
+ signal(SIGRTMIN, signal_handler);
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
/* Initialise EAL */
ret = rte_eal_init(argc, argv);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "Could not initialise EAL (%d)", ret);
+ rte_exit(EXIT_FAILURE, "Could not initialise EAL (%d)\n", ret);
argc -= ret;
argv += ret;
/* Parse application arguments (after the EAL ones) */
- parse_args(argc, argv);
+ ret = parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Could not parse input parameters\n");
/* Create the mbuf pool */
- pktmbuf_pool = rte_mempool_create("mbuf_pool", NB_MBUF, MBUF_SZ,
- MEMPOOL_CACHE_SZ,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL,
- SOCKET, 0);
+ pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF,
+ MEMPOOL_CACHE_SZ, 0, MBUF_DATA_SZ, rte_socket_id());
if (pktmbuf_pool == NULL) {
- rte_exit(EXIT_FAILURE, "Could not initialise mbuf pool");
+ rte_exit(EXIT_FAILURE, "Could not initialise mbuf pool\n");
return -1;
}
- /* Initialise PMD driver(s) */
- ret = rte_pmd_init_all();
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Could not initialise PMD (%d)", ret);
-
- /* Scan PCI bus for recognised devices */
- ret = rte_eal_pci_probe();
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Could not probe PCI (%d)", ret);
-
/* Get number of ports found in scan */
- nb_sys_ports = rte_eth_dev_count();
+ nb_sys_ports = rte_eth_dev_count_avail();
if (nb_sys_ports == 0)
- rte_exit(EXIT_FAILURE, "No supported Ethernet devices found - "
- "check that CONFIG_RTE_LIBRTE_IGB_PMD=y and/or "
- "CONFIG_RTE_LIBRTE_IXGBE_PMD=y in the config file");
- /* Find the number of configured ports in the port mask */
- for (i = 0; i < sizeof(ports_mask) * 8; i++)
- cfg_ports += !! (ports_mask & (1 << i));
+ rte_exit(EXIT_FAILURE, "No supported Ethernet device found\n");
- if (cfg_ports > nb_sys_ports)
- rte_exit(EXIT_FAILURE, "Port mask requires more ports than "
- "available");
+ /* Check if the configured port ID is valid */
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++)
+ if (kni_port_params_array[i] && !rte_eth_dev_is_valid_port(i))
+ rte_exit(EXIT_FAILURE, "Configured invalid "
+ "port ID %u\n", i);
- if (kni_setup_port_affinities(nb_sys_ports) < 0)
- rte_exit(EXIT_FAILURE, "Fail to setup port affinities\n");
+ /* Initialize KNI subsystem */
+ init_kni();
/* Initialise each port */
- for (port = 0; port < nb_sys_ports; port++) {
- struct rte_kni *kni;
-
+ RTE_ETH_FOREACH_DEV(port) {
/* Skip ports that are not enabled */
- if ((ports_mask & (1 << port)) == 0) {
+ if (!(ports_mask & (1 << port)))
continue;
- }
init_port(port);
if (port >= RTE_MAX_ETHPORTS)
rte_exit(EXIT_FAILURE, "Can not use more than "
"%d ports for kni\n", RTE_MAX_ETHPORTS);
- kni = rte_kni_create(port, MAX_PACKET_SZ, pktmbuf_pool,
- &kni_ops);
- if (kni == NULL)
- rte_exit(EXIT_FAILURE, "Fail to create kni dev "
- "for port: %d\n", port);
- kni_port_info[port].kni = kni;
+ kni_alloc(port);
}
- check_all_ports_link_status(nb_sys_ports, ports_mask);
+ check_all_ports_link_status(ports_mask);
+
+ pid = getpid();
+ RTE_LOG(INFO, APP, "========================\n");
+ RTE_LOG(INFO, APP, "KNI Running\n");
+ RTE_LOG(INFO, APP, "kill -SIGUSR1 %d\n", pid);
+ RTE_LOG(INFO, APP, " Show KNI Statistics.\n");
+ RTE_LOG(INFO, APP, "kill -SIGUSR2 %d\n", pid);
+ RTE_LOG(INFO, APP, " Zero KNI Statistics.\n");
+ RTE_LOG(INFO, APP, "========================\n");
+ fflush(stdout);
+
+ ret = rte_ctrl_thread_create(&kni_link_tid,
+ "KNI link status check", NULL,
+ monitor_all_ports_link_status, NULL);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Could not create link status thread!\n");
/* Launch per-lcore function on every lcore */
- rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
- RTE_LCORE_FOREACH_SLAVE(i) {
+ rte_eal_mp_remote_launch(main_loop, NULL, CALL_MAIN);
+ RTE_LCORE_FOREACH_WORKER(i) {
if (rte_eal_wait_lcore(i) < 0)
return -1;
}
+ monitor_links = 0;
+ pthread_join(kni_link_tid, &retval);
+
+ /* Release resources */
+ RTE_ETH_FOREACH_DEV(port) {
+ if (!(ports_mask & (1 << port)))
+ continue;
+ kni_free_kni(port);
+ }
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++)
+ if (kni_port_params_array[i]) {
+ rte_free(kni_port_params_array[i]);
+ kni_port_params_array[i] = NULL;
+ }
+
+ /* clean up the EAL */
+ rte_eal_cleanup();
return 0;
}
-