/*-
* BSD LICENSE
- *
+ *
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
- *
+ *
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
- *
+ *
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
- *
+ *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#include <ctype.h>
#include <errno.h>
#include <getopt.h>
+#include <signal.h>
+#include <stdbool.h>
#include <rte_common.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_memzone.h>
-#include <rte_tailq.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
-#include "main.h"
+static volatile bool force_quit;
#define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 8192
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-#define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */
-#define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */
-#define RX_WTHRESH 4 /**< Default values of RX write-back threshold reg. */
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-#define TX_PTHRESH 36 /**< Default values of TX prefetch threshold reg. */
-#define TX_HTHRESH 0 /**< Default values of TX host threshold reg. */
-#define TX_WTHRESH 0 /**< Default values of TX write-back threshold reg. */
-
#define MAX_PKT_BURST 32
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
},
};
-static const struct rte_eth_rxconf rx_conf = {
- .rx_thresh = {
- .pthresh = RX_PTHRESH,
- .hthresh = RX_HTHRESH,
- .wthresh = RX_WTHRESH,
- },
-};
-
-static const struct rte_eth_txconf tx_conf = {
- .tx_thresh = {
- .pthresh = TX_PTHRESH,
- .hthresh = TX_HTHRESH,
- .wthresh = TX_WTHRESH,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
- /*
- * As the example won't handle mult-segments and offload cases,
- * set the flag by default.
- */
- .txq_flags = ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOOFFLOADS,
-};
-
struct rte_mempool * l2fwd_pktmbuf_pool = NULL;
/* Per-port statistics struct */
portid);
}
- while (1) {
+ while (!force_quit) {
cur_tsc = rte_rdtsc();
printf("\nChecking link status");
fflush(stdout);
for (count = 0; count <= MAX_CHECK_TIME; count++) {
+ if (force_quit)
+ return;
all_ports_up = 1;
for (portid = 0; portid < port_num; portid++) {
+ if (force_quit)
+ return;
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
}
}
+static void
+signal_handler(int signum)
+{
+ if (signum == SIGINT || signum == SIGTERM) {
+ printf("\n\nSignal %d received, preparing to exit...\n",
+ signum);
+ force_quit = true;
+ }
+}
+
int
-MAIN(int argc, char **argv)
+main(int argc, char **argv)
{
struct lcore_queue_conf *qconf;
struct rte_eth_dev_info dev_info;
argc -= ret;
argv += ret;
+ force_quit = false;
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+
/* parse application arguments (after the EAL ones) */
ret = l2fwd_parse_args(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid L2FWD arguments\n");
/* create the mbuf pool */
- l2fwd_pktmbuf_pool =
- rte_mempool_create("mbuf_pool", NB_MBUF,
- MBUF_SIZE, 32,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32,
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (l2fwd_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
- if (rte_eal_pci_probe() < 0)
- rte_exit(EXIT_FAILURE, "Cannot probe PCI\n");
-
nb_ports = rte_eth_dev_count();
if (nb_ports == 0)
rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
/* init one RX queue */
fflush(stdout);
ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
- rte_eth_dev_socket_id(portid), &rx_conf,
+ rte_eth_dev_socket_id(portid),
+ NULL,
l2fwd_pktmbuf_pool);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup:err=%d, port=%u\n",
/* init one TX queue on each port */
fflush(stdout);
ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
- rte_eth_dev_socket_id(portid), &tx_conf);
+ rte_eth_dev_socket_id(portid),
+ NULL);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup:err=%d, port=%u\n",
ret, (unsigned) portid);
check_all_ports_link_status(nb_ports, l2fwd_enabled_port_mask);
+ ret = 0;
/* launch per-lcore init on every lcore */
rte_eal_mp_remote_launch(l2fwd_launch_one_lcore, NULL, CALL_MASTER);
RTE_LCORE_FOREACH_SLAVE(lcore_id) {
- if (rte_eal_wait_lcore(lcore_id) < 0)
- return -1;
+ if (rte_eal_wait_lcore(lcore_id) < 0) {
+ ret = -1;
+ break;
+ }
}
- return 0;
-}
+ for (portid = 0; portid < nb_ports; portid++) {
+ if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
+ continue;
+ printf("Closing port %d...", portid);
+ rte_eth_dev_stop(portid);
+ rte_eth_dev_close(portid);
+ printf(" Done\n");
+ }
+ printf("Bye...\n");
+ return ret;
+}
git.droids-corp.org / dpdk.git / blobdiff