-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2015-2016 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2016 Intel Corporation
*/
#include <time.h>
#include <rte_memcpy.h>
#include <rte_memory.h>
#include <rte_mempool.h>
-#include <rte_pci.h>
#include <rte_per_lcore.h>
#include <rte_prefetch.h>
#include <rte_random.h>
/*
* Configurable number of RX/TX ring descriptors
*/
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 1024
static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
-static const struct rte_eth_conf port_conf = {
+static struct rte_eth_conf port_conf = {
.rxmode = {
.mq_mode = ETH_MQ_RX_NONE,
.max_rx_pkt_len = ETHER_MAX_LEN,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 1, /**< CRC stripped by hardware */
+ .ignore_offload_bitfield = 1,
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
options->aead_iv_random_size = -1;
options->aead_iv.length = 0;
- options->auth_xform.aead.algo = RTE_CRYPTO_AEAD_AES_GCM;
- options->auth_xform.aead.op = RTE_CRYPTO_AEAD_OP_ENCRYPT;
+ options->aead_xform.aead.algo = RTE_CRYPTO_AEAD_AES_GCM;
+ options->aead_xform.aead.op = RTE_CRYPTO_AEAD_OP_ENCRYPT;
options->aad_param = 0;
options->aad_random_size = -1;
/* Check the link status of all ports in up to 9s, and print them finally */
static void
-check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
fflush(stdout);
for (count = 0; count <= MAX_CHECK_TIME; count++) {
all_ports_up = 1;
- for (portid = 0; portid < port_num; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
}
for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
- sess_sz = rte_cryptodev_get_private_session_size(cdev_id);
+ sess_sz = rte_cryptodev_sym_get_private_session_size(cdev_id);
if (sess_sz > max_sess_sz)
max_sess_sz = sess_sz;
}
static int
initialize_ports(struct l2fwd_crypto_options *options)
{
- uint16_t last_portid, portid;
+ uint16_t last_portid = 0, portid;
unsigned enabled_portcount = 0;
- unsigned nb_ports = rte_eth_dev_count();
+ unsigned nb_ports = rte_eth_dev_count_avail();
if (nb_ports == 0) {
printf("No Ethernet ports - bye\n");
for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++)
l2fwd_dst_ports[portid] = 0;
- for (last_portid = 0, portid = 0; portid < nb_ports; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
int retval;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_rxconf rxq_conf;
+ struct rte_eth_txconf txq_conf;
+ struct rte_eth_conf local_port_conf = port_conf;
/* Skip ports that are not enabled */
if ((options->portmask & (1 << portid)) == 0)
/* init port */
printf("Initializing port %u... ", portid);
fflush(stdout);
- retval = rte_eth_dev_configure(portid, 1, 1, &port_conf);
+ rte_eth_dev_info_get(portid, &dev_info);
+ if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ local_port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+ retval = rte_eth_dev_configure(portid, 1, 1, &local_port_conf);
if (retval < 0) {
printf("Cannot configure device: err=%d, port=%u\n",
retval, portid);
/* init one RX queue */
fflush(stdout);
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = local_port_conf.rxmode.offloads;
retval = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
rte_eth_dev_socket_id(portid),
- NULL, l2fwd_pktmbuf_pool);
+ &rxq_conf, l2fwd_pktmbuf_pool);
if (retval < 0) {
printf("rte_eth_rx_queue_setup:err=%d, port=%u\n",
retval, portid);
/* init one TX queue on each port */
fflush(stdout);
+ txq_conf = dev_info.default_txconf;
+ txq_conf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
+ txq_conf.offloads = local_port_conf.txmode.offloads;
retval = rte_eth_tx_queue_setup(portid, 0, nb_txd,
rte_eth_dev_socket_id(portid),
- NULL);
+ &txq_conf);
if (retval < 0) {
printf("rte_eth_tx_queue_setup:err=%d, port=%u\n",
retval, portid);
return -1;
}
- check_all_ports_link_status(nb_ports, l2fwd_enabled_port_mask);
+ check_all_ports_link_status(l2fwd_enabled_port_mask);
return enabled_portcount;
}
int
main(int argc, char **argv)
{
- struct lcore_queue_conf *qconf;
+ struct lcore_queue_conf *qconf = NULL;
struct l2fwd_crypto_options options;
uint8_t nb_cryptodevs, cdev_id;
- uint16_t nb_ports, portid;
- unsigned lcore_id, rx_lcore_id;
+ uint16_t portid;
+ unsigned lcore_id, rx_lcore_id = 0;
int ret, enabled_cdevcount, enabled_portcount;
uint8_t enabled_cdevs[RTE_CRYPTO_MAX_DEVS] = {0};
if (enabled_portcount < 1)
rte_exit(EXIT_FAILURE, "Failed to initial Ethernet ports\n");
- nb_ports = rte_eth_dev_count();
/* Initialize the port/queue configuration of each logical core */
- for (rx_lcore_id = 0, qconf = NULL, portid = 0;
- portid < nb_ports; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
/* skip ports that are not enabled */
if ((options.portmask & (1 << portid)) == 0)